[PATCH v4 1/6] ARM: U8500 register definitions
srinidhi kasagar
srinidhi.kasagar at stericsson.com
Thu Nov 26 18:55:38 EST 2009
From: srinidhi kasagar <srinidhi.kasagar at stericsson.com>
Date: Fri, 27 Nov 2009 15:28:17 +0530
Adds register definitions, shared peripheral interrupt
numbers (SHPI) and IO mappings for the U8500 core support.
SHPI are assigned to [160:32] where first 32 interrupts
are reserved.
Signed-off-by: srinidhi kasagar <srinidhi.kasagar at stericsson.com>
Acked-by: Andrea Gallo <andrea.gallo at stericsson.com>
Reviewed-by: Alessandro Rubin <rubini at unipv.it>
---
arch/arm/mach-ux500/include/mach/hardware.h | 131 +++++++++++++++++++++++++++
arch/arm/mach-ux500/include/mach/io.h | 22 +++++
arch/arm/mach-ux500/include/mach/irqs.h | 71 +++++++++++++++
3 files changed, 224 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-ux500/include/mach/hardware.h
create mode 100644 arch/arm/mach-ux500/include/mach/io.h
create mode 100644 arch/arm/mach-ux500/include/mach/irqs.h
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
new file mode 100644
index 0000000..6da6502
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * U8500 hardware definitions
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+/* macros to get at IO space when running virtually
+ * We dont map all the peripherals, let ioremap do
+ * this for us. We map only very basic peripherals here.
+ */
+#define U8500_IO_VIRTUAL 0xf0000000
+#define U8500_IO_PHYSICAL 0xa0000000
+
+/* this macro is used in assembly, so no cast */
+#define IO_ADDRESS(x) \
+ (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
+
+/* typesafe io address */
+#define __io_address(n) __io(IO_ADDRESS(n))
+
+/*
+ * Base address definitions for U8500 Onchip IPs. All the
+ * peripherals are contained in a single 1 Mbyte region, with
+ * AHB peripherals at the bottom and APB peripherals at the
+ * top of the region. PER stands for PERIPHERAL region which
+ * itself divided into sub regions.
+ */
+#define U8500_PER3_BASE 0x80000000
+#define U8500_PER2_BASE 0x80110000
+#define U8500_PER1_BASE 0x80120000
+#define U8500_PER4_BASE 0x80150000
+
+#define U8500_PER6_BASE 0xa03c0000
+#define U8500_PER5_BASE 0xa03e0000
+#define U8500_PER7_BASE 0xa03d0000
+
+#define U8500_SVA_BASE 0xa0100000
+#define U8500_SIA_BASE 0xa0200000
+
+#define U8500_SGA_BASE 0xa0300000
+#define U8500_MCDE_BASE 0xa0350000
+#define U8500_DMA_BASE 0xa0362000
+
+#define U8500_SCU_BASE 0xa0410000
+#define U8500_GIC_CPU_BASE 0xa0410100
+#define U8500_TWD_BASE 0xa0410600
+#define U8500_GIC_DIST_BASE 0xa0411000
+#define U8500_L2CC_BASE 0xa0412000
+
+#define U8500_TWD_SIZE 0x100
+
+/* per7 base addressess */
+#define U8500_CR_BASE (U8500_PER7_BASE + 0x8000)
+#define U8500_MTU0_BASE (U8500_PER7_BASE + 0xa000)
+#define U8500_MTU1_BASE (U8500_PER7_BASE + 0xb000)
+#define U8500_TZPC0_BASE (U8500_PER7_BASE + 0xc000)
+#define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000)
+
+/* per6 base addressess */
+#define U8500_RNG_BASE (U8500_PER6_BASE + 0x0000)
+#define U8500_PKA_BASE (U8500_PER6_BASE + 0x1000)
+#define U8500_PKAM_BASE (U8500_PER6_BASE + 0x2000)
+#define U8500_CRYPTO0_BASE (U8500_PER6_BASE + 0xa000)
+#define U8500_CRYPTO1_BASE (U8500_PER6_BASE + 0xb000)
+#define U8500_CLKRST6_BASE (U8500_PER7_BASE + 0xf000)
+
+/* per5 base addressess */
+#define U8500_USBOTG_BASE (U8500_PER5_BASE + 0x00000)
+#define U8500_GPIO5_BASE (U8500_PER5_BASE + 0x1e000)
+#define U8500_CLKRST5_BASE (U8500_PER7_BASE + 0x1f000)
+
+/* per4 base addressess */
+#define U8500_BACKUPRAM0_BASE (U8500_PER4_BASE + 0x0000)
+#define U8500_BACKUPRAM1_BASE (U8500_PER4_BASE + 0x1000)
+#define U8500_RTT0_BASE (U8500_PER4_BASE + 0x2000)
+#define U8500_RTT1_BASE (U8500_PER4_BASE + 0x3000)
+#define U8500_RTC_BASE (U8500_PER4_BASE + 0x4000)
+#define U8500_SCR_BASE (U8500_PER4_BASE + 0x5000)
+#define U8500_DMC_BASE (U8500_PER4_BASE + 0x6000)
+#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x7000)
+
+/* per3 base addressess */
+#define U8500_FSMC_BASE (U8500_PER3_BASE + 0x0000)
+#define U8500_SSP0_BASE (U8500_PER3_BASE + 0x2000)
+#define U8500_SSP1_BASE (U8500_PER3_BASE + 0x3000)
+#define U8500_I2C0_BASE (U8500_PER3_BASE + 0x4000)
+#define U8500_SDI2_BASE (U8500_PER3_BASE + 0x5000)
+#define U8500_SKE_BASE (U8500_PER3_BASE + 0x6000)
+#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000)
+#define U8500_SDI5_BASE (U8500_PER3_BASE + 0x8000)
+#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xe000)
+#define U8500_CLKRST3_BASE (U8500_PER7_BASE + 0xf000)
+
+/* per2 base addressess */
+#define U8500_I2C3_BASE (U8500_PER2_BASE + 0x0000)
+#define U8500_SPI2_BASE (U8500_PER2_BASE + 0x1000)
+#define U8500_SPI1_BASE (U8500_PER2_BASE + 0x2000)
+#define U8500_PWL_BASE (U8500_PER2_BASE + 0x3000)
+#define U8500_SDI4_BASE (U8500_PER2_BASE + 0x4000)
+#define U8500_MSP2_BASE (U8500_PER2_BASE + 0x7000)
+#define U8500_SDI1_BASE (U8500_PER2_BASE + 0x8000)
+#define U8500_SDI3_BASE (U8500_PER2_BASE + 0x9000)
+#define U8500_SPI0_BASE (U8500_PER2_BASE + 0xa000)
+#define U8500_HSIR_BASE (U8500_PER2_BASE + 0xb000)
+#define U8500_HSIT_BASE (U8500_PER2_BASE + 0xc000)
+#define U8500_GPIO2_BASE (U8500_PER2_BASE + 0xe000)
+#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000)
+
+/* per1 base addresses */
+#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000)
+#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000)
+#define U8500_I2C1_BASE (U8500_PER1_BASE + 0x2000)
+#define U8500_MSP0_BASE (U8500_PER1_BASE + 0x3000)
+#define U8500_MSP1_BASE (U8500_PER1_BASE + 0x4000)
+#define U8500_SDI0_BASE (U8500_PER1_BASE + 0x6000)
+#define U8500_I2C2_BASE (U8500_PER1_BASE + 0x8000)
+#define U8500_SPI3_BASE (U8500_PER1_BASE + 0x9000)
+#define U8500_SLIM0_BASE (U8500_PER1_BASE + 0xa000)
+#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xe000)
+#define U8500_CLKRST1_BASE (U8500_PER2_BASE + 0xf000)
+
+/* ST-Ericsson modified pl022 id */
+#define SSP_PER_ID 0x01080022
+
+#endif /* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-ux500/include/mach/io.h b/arch/arm/mach-ux500/include/mach/io.h
new file mode 100644
index 0000000..1cf3f44
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-u8500/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ * 06-12-1997 RMK Created.
+ * 07-04-1999 RMK Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a) __typesafe_io(a)
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
new file mode 100644
index 0000000..394b5dd
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2008 STMicroelectronics
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef ASM_ARCH_IRQS_H
+#define ASM_ARCH_IRQS_H
+
+#include <mach/hardware.h>
+
+#define IRQ_LOCALTIMER 29
+#define IRQ_LOCALWDOG 30
+
+/* Shared Peripheral Interrupt (SHPI) */
+#define IRQ_SHPI_START 32
+
+/* Interrupt numbers generic for shared peripheral */
+#define IRQ_MTU0 (IRQ_SHPI_START + 4)
+#define IRQ_SPI2 (IRQ_SHPI_START + 6)
+#define IRQ_SPI0 (IRQ_SHPI_START + 8)
+#define IRQ_UART0 (IRQ_SHPI_START + 11)
+#define IRQ_I2C3 (IRQ_SHPI_START + 12)
+#define IRQ_SSP0 (IRQ_SHPI_START + 14)
+#define IRQ_MTU1 (IRQ_SHPI_START + 17)
+#define IRQ_RTC_RTT (IRQ_SHPI_START + 18)
+#define IRQ_UART1 (IRQ_SHPI_START + 19)
+#define IRQ_I2C0 (IRQ_SHPI_START + 21)
+#define IRQ_I2C1 (IRQ_SHPI_START + 22)
+#define IRQ_USBOTG (IRQ_SHPI_START + 23)
+#define IRQ_DMA (IRQ_SHPI_START + 25)
+#define IRQ_UART2 (IRQ_SHPI_START + 26)
+#define IRQ_HSIR_EXCEP (IRQ_SHPI_START + 29)
+#define IRQ_MSP0 (IRQ_SHPI_START + 31)
+#define IRQ_HSIR_CH0_OVRRUN (IRQ_SHPI_START + 32)
+#define IRQ_HSIR_CH1_OVRRUN (IRQ_SHPI_START + 33)
+#define IRQ_HSIR_CH2_OVRRUN (IRQ_SHPI_START + 34)
+#define IRQ_HSIR_CH3_OVRRUN (IRQ_SHPI_START + 35)
+#define IRQ_AB4500 (IRQ_SHPI_START + 40)
+#define IRQ_DISP (IRQ_SHPI_START + 48)
+#define IRQ_SiPI3 (IRQ_SHPI_START + 49)
+#define IRQ_SSP1 (IRQ_SHPI_START + 52)
+#define IRQ_I2C2 (IRQ_SHPI_START + 55)
+#define IRQ_SDMMC0 (IRQ_SHPI_START + 60)
+#define IRQ_MSP1 (IRQ_SHPI_START + 62)
+#define IRQ_SPI1 (IRQ_SHPI_START + 96)
+#define IRQ_MSP2 (IRQ_SHPI_START + 98)
+#define IRQ_SDMMC4 (IRQ_SHPI_START + 99)
+#define IRQ_HSIRD0 (IRQ_SHPI_START + 104)
+#define IRQ_HSIRD1 (IRQ_SHPI_START + 105)
+#define IRQ_HSITD0 (IRQ_SHPI_START + 106)
+#define IRQ_HSITD1 (IRQ_SHPI_START + 107)
+#define IRQ_GPIO0 (IRQ_SHPI_START + 119)
+#define IRQ_GPIO1 (IRQ_SHPI_START + 120)
+#define IRQ_GPIO2 (IRQ_SHPI_START + 121)
+#define IRQ_GPIO3 (IRQ_SHPI_START + 122)
+#define IRQ_GPIO4 (IRQ_SHPI_START + 123)
+#define IRQ_GPIO5 (IRQ_SHPI_START + 124)
+#define IRQ_GPIO6 (IRQ_SHPI_START + 125)
+#define IRQ_GPIO7 (IRQ_SHPI_START + 126)
+#define IRQ_GPIO8 (IRQ_SHPI_START + 127)
+
+/* There are 128 shared peripheral interrupts assigned to
+ * INTID[160:32]. The first 32 interrupts are reserved.
+ */
+#define NR_IRQS 161
+
+#endif /*ASM_ARCH_IRQS_H*/
--
1.6.3.GIT
More information about the linux-arm-kernel
mailing list