[PATCH 3/6] gta02: set pcf50633 charger_reference_current_ma

[Paul Fertser]

Hi,

Ben, please give us an advice on how to proceed with this rather
trivial patch. Anton doesn't merge the other patches from this series
because we do not know via which tree to merge this particular patch.

On Thu, Nov 05, 2009 at 12:24:56AM +0300, Paul Fertser wrote:
> From: Lars-Peter Clausen <lars at metafoo.de>
> 
> This value is board-specific and is needed for calculations to set charging
> current limit properly.
> 
> Signed-off-by: Lars-Peter Clausen <lars at metafoo.de>
> Acked-by: Nelson Castillo <arhuaco at freaks-unidos.net>
> Signed-off-by: Paul Fertser <fercerpav at gmail.com>
> Cc: Russell King <rmk+kernel at arm.linux.org.uk>
> ---
> 
> Since this patch compile-depends on previous probably it should go through
> the same tree as others. Nelson (gta02 maintainer) agrees with whatever you
> think is best.
> 
> Anton Vorontsov is ok with merging it through his tree but needs an explicit
> ack.
> 
>  arch/arm/mach-s3c2442/mach-gta02.c |    3 +++
>  1 files changed, 3 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
> index 0fb385b..b0a3d74 100644
> --- a/arch/arm/mach-s3c2442/mach-gta02.c
> +++ b/arch/arm/mach-s3c2442/mach-gta02.c
> @@ -268,6 +268,9 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
>  
>  	.batteries = gta02_batteries,
>  	.num_batteries = ARRAY_SIZE(gta02_batteries),
> +
> +	.charger_reference_current_ma = 1000,
> +
>  	.reg_init_data = {
>  		[PCF50633_REGULATOR_AUTO] = {
>  			.constraints = {
> -- 
> 1.6.4.4
> 

-- 
Be free, use free (http://www.gnu.org/philosophy/free-sw.html) software!
mailto:fercerpav at gmail.com