[PATCH 01/02] pxa: set default WLED output current in saar

[Haojian Zhuang]

On Thu, Nov 5, 2009 at 2:58 AM, Haojian Zhuang <haojian.zhuang at gmail.com> wrote:
> On Thu, Nov 5, 2009 at 2:58 AM, Haojian Zhuang <haojian.zhuang at gmail.com> wrote:
>> From 4fdab1032a74fcfcd48b134d0d91af5f1868332b Mon Sep 17 00:00:00 2001
>> From: Haojian Zhuang <haojian.zhuang at marvell.com>
>> Date: Thu, 5 Nov 2009 10:31:01 -0500
>> Subject: [PATCH] [ARM] pxa: set default WLED output current in saar
>>
>> Set default WLED output current in saar. Otherwise, LCD backlight won't be
>> effective.
>>
>> Signed-off-by: Haojian Zhuang <haojian.zhuang at marvell.com>
>> ---
>>  arch/arm/mach-pxa/saar.c |    5 +++++
>>  1 files changed, 5 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
>> index 8241a63..a16590a 100644
>> --- a/arch/arm/mach-pxa/saar.c
>> +++ b/arch/arm/mach-pxa/saar.c
>> @@ -451,10 +451,15 @@ static inline void saar_init_lcd(void) {}
>>  #endif
>>
>>  #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
>> +static struct da9034_backlight_pdata saar_da9034_backlight = {
>> +       .out_current    = DA9034_WLED_CURRENT(4),
>> +};
>> +
>>  static struct da903x_subdev_info saar_da9034_subdevs[] = {
>>        [0] = {
>>                .name           = "da903x-backlight",
>>                .id             = DA9034_ID_WLED,
>> +               .platform_data  = &saar_da9034_backlight,
>>        },
>>  };
>>
>> --
>> 1.5.6.5
>>
>
> It should be the second patch in this series.
>