Possible suspend/resume regression in .32-rc?

[Stanislav Brabec]

Haojian Zhuang wrote:
> On Mon, Nov 2, 2009 at 5:57 AM, Stanislav Brabec <utx at penguin.cz> wrote:
> > Haojian Zhuang wrote:
> >
> >> Commit b5b82df6, from May 2007, breaks no_console_suspend on the OLPC
> >> XO laptop. Basically what happens is that upon returning from resume,
> >> serial8250_resume_port() will reconfigure the port for high speed
> >> mode and all console output will be garbled, making debug of the
> >> resume path painful. This patch modifies uart_resume_port() to
> >> reset the port to the state it was in before we suspended.
> >
> > See my patch waiting for approval in LKML thread
> > "serial-core: resume serial hardware with no_console_suspend".
> >
> > It attempts to fix it, but I was not yet able to test it due to spitz
> > resume breakage.
> >
> 
> Hi Stanislav,
> 
> At first, your patch can't be applied into my latest codebase. I have
> to update the patch. But the console resume is still blocked after
> applied your patch. It works only after I merge some old code back. My
> modified patch is in below.

Yes, code changed there a bit. I sent rebased patch later in the thread.
Did you try this one? (Well I did not test it yet - in time of sending
resume did not work at all on my Zaurus.)

Your patch is a bit different. I'll test both as soon as possible.


________________________________________________________________________
Stanislav Brabec
http://www.penguin.cz/~utx