spitz battery driver

Eric Miao eric.y.miao at gmail.com
Mon Nov 9 22:48:16 EST 2009


On Mon, Nov 9, 2009 at 9:58 PM, Pavel Machek <pavel at ucw.cz> wrote:
> Hi!
>
> This introduces battery driver for spitz. For now it is
> monitoring&debug-only.
>

This is a good move. However, I assume the patch is still RFC now.
Or basically the coding style cleanup can be separated into another
patch?

> Signed-off-by: Pavel Machek <pavel at ucw.cz> (but not meant for merge)
>
> --- ./drivers/power.ofic/Makefile       2009-10-06 13:51:29.000000000 +0200
> +++ ./drivers/power/Makefile    2009-10-11 16:12:09.000000000 +0200
> @@ -24,6 +24,7 @@
>  obj-$(CONFIG_BATTERY_PMU)      += pmu_battery.o
>  obj-$(CONFIG_BATTERY_OLPC)     += olpc_battery.o
>  obj-$(CONFIG_BATTERY_TOSA)     += tosa_battery.o
> +obj-m  += spitz_battery.o
>  obj-$(CONFIG_BATTERY_WM97XX)   += wm97xx_battery.o
>  obj-$(CONFIG_BATTERY_BQ27x00)  += bq27x00_battery.o
>  obj-$(CONFIG_BATTERY_DA9030)   += da9030_battery.o
> diff -ur ./drivers/power.ofic/power_supply_sysfs.c ./drivers/power/power_supply_sysfs.c
> --- ./drivers/power.ofic/power_supply_sysfs.c   2009-10-06 13:51:29.000000000 +0200
> +++ ./drivers/power/power_supply_sysfs.c        2009-10-15 05:45:46.000000000 +0200
> @@ -39,7 +39,8 @@
>
>  static ssize_t power_supply_show_property(struct device *dev,
>                                          struct device_attribute *attr,
> -                                         char *buf) {
> +                                         char *buf)
> +{
>        static char *status_text[] = {
>                "Unknown", "Charging", "Discharging", "Not charging", "Full"
>        };
> @@ -135,7 +136,8 @@
>
>  static ssize_t power_supply_show_static_attrs(struct device *dev,
>                                              struct device_attribute *attr,
> -                                             char *buf) {
> +                                             char *buf)
> +{
>        static char *type_text[] = { "Battery", "UPS", "Mains", "USB" };
>        struct power_supply *psy = dev_get_drvdata(dev);
>
> diff -ur ./drivers/power.ofic/spitz_battery.c ./drivers/power/spitz_battery.c
> --- ./drivers/power.ofic/spitz_battery.c        2009-10-11 16:14:11.000000000 +0200
> +++ ./drivers/power/spitz_battery.c     2009-10-22 07:27:52.000000000 +0200
> @@ -0,0 +1,430 @@
> +/*
> + * Battery and Power Management code for the Sharp SL-3000c
> + *
> + * Copyright (c) 2009 Pavel Machek <pavel at ucw.cz>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * Li-ion batteries are angry beasts, and they like to explode.
> + * If angry lithium comes your way, the hw was misdesigned.
> + *
> + */
> +#include <linux/platform_device.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/power_supply.h>
> +#include <linux/delay.h>
> +#include <linux/spinlock.h>
> +#include <linux/interrupt.h>
> +#include <linux/gpio.h>
> +
> +#include <asm/mach-types.h>
> +#include <mach/spitz.h>
> +#include <mach/sharpsl.h>
> +#include <mach/sharpsl_pm.h>
> +
> +#include "../../arch/arm/mach-pxa/sharpsl.h"
> +
> +extern struct sharpsl_pm_status sharpsl_pm;
> +
> +
> +struct spitz_bat {
> +       struct power_supply psy;
> +
> +       bool (*is_present)(struct spitz_bat *bat);
> +};
> +
> +static struct spitz_bat spitz_bat_main, spitz_ac;
> +
> +extern int sharpsl_pm_pxa_read_max1111(int channel);
> +
> +int basic_current = 125; /* miliAmp */
> +int battery_resistance = 422; /* miliOhm */
> +
> +/* 422 seems to be suitable for very old, 1Ah battery.
> +   2Ah battery probably has better resistance */
> +
> +/* Unfortunately, resistance depends on state of charge, current
> + * direction and temperature.
> + *
> + * Ouch, and dependency is actually _not_ too simple. It is lowest
> + * at 3.55V, very slowly rises at 4V (approximately linear dependency),
> + * and quickly rises towards 3.2V (in something exponential-looking).
> + *
> + * It is about same at 25Celsius and 40Celsius, and about 2.5x the value
> + * on 0Celsius, rising _very_ sharply.
> + *
> + * Li-ion should only be charged between 0 and 45 Celsius, and discharged
> + * between -20 and 60 celsius.
> + */
> +
> +extern int backlight_current;
> +
> +int battery_current(void)
> +{
> +       int intensity = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
> +
> +       return basic_current + backlight_current;
> +}
> +
> +int liion_internal_voltage(int voltage, int current_ma)
> +{
> +       return voltage + (battery_resistance * current_ma / 1000);
> +}
> +
> +int liion_expected_voltage(int internal_voltage, int current_ma)
> +{
> +       return internal_voltage - (battery_resistance * current_ma / 1000);
> +}
> +
> +/* returns mV */
> +int liion_voltage(void)
> +{
> +       /* Thanks to Stanislav B. ADC has 3.3V as reference,
> +          is connected to battery over 47kOhm,
> +          and to ground over 100kOhm. */
> +       return (sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT) * 147 * 33)/256;
> +}
> +
> +/* See for example http://www.kokam.com/english/biz/rc.html for
> + * voltage/capacity characteristic. I assume it is going to be
> + * reasonably similar to li-ion used in collie.
> + *
> + */
> +
> +/*
> + { 420, 100 },
> + { 417, 95 }, means it will report 100% between 418 and 420
> + */
> +
> +struct battery_thresh battery_levels[] = {
> +       { 3980, 100 },
> +       { 3900, 95 },
> +       { 3860, 90 },
> +       { 3800, 85 },
> +       { 3760, 80 },
> +       { 3720, 74 },
> +       { 3680, 69 },
> +       { 3620, 65 },
> +       { 3570, 59 },
> +       { 3560, 55 },
> +       { 3550, 48 },
> +       { 3530, 45 },
> +       { 3510, 39 },
> +       { 3490, 33 },
> +       { 3470, 29 },
> +       { 3450, 23 },
> +       { 3410, 16 },
> +       {    0, 0 },
> +};
> +
> +int get_percentage(void)
> +{
> +       int i = ARRAY_SIZE(battery_levels);
> +       struct battery_thresh *thresh;
> +       int voltage = liion_internal_voltage(liion_voltage(), battery_current());
> +
> +       thresh = battery_levels;
> +
> +       while (i > 0 && (voltage > thresh[i].voltage))
> +               i--;
> +
> +       return thresh[i].percentage;
> +}
> +
> +static int spitz_bat_get_property(struct power_supply *psy,
> +                           enum power_supply_property psp,
> +                           union power_supply_propval *val)
> +{
> +       int ret = 0;
> +       struct spitz_bat *bat = container_of(psy, struct spitz_bat, psy);
> +
> +       val->intval = 0;
> +
> +       switch (psp) {
> +       case POWER_SUPPLY_PROP_HEALTH:
> +               /* POWER_SUPPLY_HEALTH_OVERHEAT , POWER_SUPPLY_HEALTH_COLD,
> +                  POWER_SUPPLY_HEALTH_OVERVOLTAGE, POWER_SUPPLY_HEALTH_UNSPEC_FAILURE, POWER_SUPPLY_HEALTH_GOOD
> +                */
> +               return 0;
> +       case POWER_SUPPLY_PROP_CHARGE_TYPE:
> +               val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
> +               if (gpio_get_value(SPITZ_GPIO_CHRG_ON) == 0) {
> +                       if (gpio_get_value(SPITZ_GPIO_JK_B) == 1)
> +                               val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
> +                       else
> +                               val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
> +               }
> +               return 0;
> +       case POWER_SUPPLY_PROP_STATUS:
> +         {
> +               int status = 0;
> +
> +               if (gpio_get_value(SPITZ_GPIO_CHRG_ON) == 0)
> +                       printk("Chrg bit on. ");
> +               if (gpio_get_value(SPITZ_GPIO_JK_B) == 0)
> +                       printk("Slow charge bit on. ");
> +
> +               val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
> +
> +               if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))
> +                       val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
> +               else {
> +                       if (gpio_get_value(SPITZ_GPIO_CHRG_ON) == 0)
> +                               val->intval = POWER_SUPPLY_STATUS_CHARGING;
> +                       if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL))
> +                               val->intval = POWER_SUPPLY_STATUS_FULL;
> +               }
> +
> +               printk("ACIN: %d ", sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN));
> +               printk("Chrgfull: %d  ", sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_CHRGFULL));
> +               printk("Fatal: %d  ", sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_FATAL));
> +               printk("ACIN_volt: %d\n", sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT));
> +
> +               return 0;
> +         }
> +       case POWER_SUPPLY_PROP_TECHNOLOGY:
> +               val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
> +               return 0;
> +       case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> +               val->intval = liion_voltage()*1000;
> +               return 0;
> +       case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> +               val->intval = 4200000;
> +               return 0;
> +       case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
> +               val->intval = 3400000;
> +               return 0;
> +       case POWER_SUPPLY_PROP_TEMP:
> +               mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
> +               sharpsl_pm.machinfo->measure_temp(1);
> +               mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
> +               val->intval = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_TEMP);
> +               sharpsl_pm.machinfo->measure_temp(0);
> +               /* 121: battery finished charging in 22C room */
> +               /* 141: outside at 6C */
> +               return 0;
> +       case POWER_SUPPLY_PROP_MODEL_NAME:
> +               val->strval = "spitz-battery";
> +               return 0;
> +       case POWER_SUPPLY_PROP_PRESENT:
> +               val->intval = 1;
> +               return 0;
> +               /* add these */
> +       case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
> +               val->intval = 2000000;
> +               return 0;
> +       case POWER_SUPPLY_PROP_CAPACITY:
> +               val->intval = get_percentage();
> +               return 0;
> +       case POWER_SUPPLY_PROP_VOLTAGE_AVG:
> +               val->intval = liion_internal_voltage(liion_voltage(), battery_current())*1000;
> +               return 0;
> +       case POWER_SUPPLY_PROP_CURRENT_NOW:
> +               val->intval = battery_current() * 1000;
> +               return 0;
> +       default:
> +               return -EINVAL;
> +       }
> +       return -EINVAL;
> +}
> +
> +static int spitz_ac_get_property(struct power_supply *psy,
> +                           enum power_supply_property psp,
> +                           union power_supply_propval *val)
> +{
> +       int ret = 0;
> +       struct spitz_bat *bat = container_of(psy, struct spitz_bat, psy);
> +
> +       val->intval = 0;
> +
> +       switch (psp) {
> +       case POWER_SUPPLY_PROP_STATUS:
> +               val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
> +               return 0;
> +       case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> +               /* Thanks to Stanislav B. ADC has 3.3V as reference,
> +                  is connected to acin over 2kOhm,
> +                  and to ground over 1kOhm. */
> +               val->intval = (sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT) * 3000 * 3300)/256;
> +               return 0;
> +       case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
> +               val->intval = 5250000;
> +               return 0;
> +       case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
> +               val->intval = 4750000;
> +               return 0;
> +       case POWER_SUPPLY_PROP_MODEL_NAME:
> +               val->strval = "spitz-power-supply";
> +               return 0;
> +       case POWER_SUPPLY_PROP_PRESENT:
> +               val->intval = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
> +               return 0;
> +       default:
> +               return -EINVAL;
> +       }
> +       return -EINVAL;
> +}
> +
> +static void spitz_bat_external_power_changed(struct power_supply *psy)
> +{
> +}
> +
> +
> +static enum power_supply_property spitz_bat_main_props[] = {
> +       POWER_SUPPLY_PROP_STATUS,
> +       POWER_SUPPLY_PROP_TECHNOLOGY,
> +       POWER_SUPPLY_PROP_VOLTAGE_NOW,
> +       POWER_SUPPLY_PROP_VOLTAGE_AVG,
> +       POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
> +       POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
> +       POWER_SUPPLY_PROP_TEMP,
> +       POWER_SUPPLY_PROP_PRESENT,
> +       POWER_SUPPLY_PROP_CHARGE_TYPE,
> +       POWER_SUPPLY_PROP_HEALTH,
> +       POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
> +       POWER_SUPPLY_PROP_CURRENT_NOW,
> +       POWER_SUPPLY_PROP_CAPACITY,
> +};
> +
> +static struct spitz_bat spitz_bat_main = {
> +       .psy = {
> +               .name           = "main-battery",
> +               .type           = POWER_SUPPLY_TYPE_BATTERY,
> +               .properties     = spitz_bat_main_props,
> +               .num_properties = ARRAY_SIZE(spitz_bat_main_props),
> +               .get_property   = spitz_bat_get_property,
> +               .external_power_changed = spitz_bat_external_power_changed,
> +               .use_for_apm    = 1,
> +       },
> +};
> +
> +static enum power_supply_property spitz_ac_props[] = {
> +       POWER_SUPPLY_PROP_STATUS,
> +       POWER_SUPPLY_PROP_VOLTAGE_NOW,
> +       POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
> +       POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
> +       POWER_SUPPLY_PROP_PRESENT,
> +};
> +
> +static struct spitz_bat spitz_ac = {
> +       .psy = {
> +               .name           = "ac",
> +               .type           = POWER_SUPPLY_TYPE_MAINS,
> +               .properties     = spitz_ac_props,
> +               .num_properties = ARRAY_SIZE(spitz_ac_props),
> +               .get_property   = spitz_ac_get_property,
> +       },
> +};
> +
> +#ifdef CONFIG_PM
> +static int spitz_bat_suspend(struct platform_device *dev, pm_message_t state)
> +{
> +       return 0;
> +}
> +
> +static int spitz_bat_resume(struct platform_device *dev)
> +{
> +       return 0;
> +}
> +#else
> +#define spitz_bat_suspend NULL
> +#define spitz_bat_resume NULL
> +#endif
> +
> +
> +static ssize_t spitz_bat_limit_show(struct device *dev,
> +                                   struct device_attribute *attr,
> +                                   char *buf)
> +{
> +       sprintf(buf, "Hello :-)");
> +       return 9;
> +}
> +
> +static ssize_t spitz_bat_limit_store(struct device *dev,
> +                                    struct device_attribute *attr,
> +                                    const char *buf, size_t count)
> +{
> +       if (!strncmp(buf, "fastcharge", 10)) {
> +               gpio_set_value(SPITZ_GPIO_JK_B, 1);
> +               gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
> +               return 10;
> +       }
> +       if (!strncmp(buf, "slowcharge", 10)) {
> +               gpio_set_value(SPITZ_GPIO_JK_B, 0);
> +               gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
> +               return 10;
> +       }
> +       if (!strncmp(buf, "nonecharge", 10)) {
> +               gpio_set_value(SPITZ_GPIO_JK_B, 0);
> +               gpio_set_value(SPITZ_GPIO_CHRG_ON, 1);
> +               return 10;
> +       }
> +       return -EINVAL;
> +}
> +
> +
> +static DEVICE_ATTR(limit, S_IRUGO | S_IWUSR, spitz_bat_limit_show, spitz_bat_limit_store);
> +#if 0
> +static struct device_attribute dev_attr_limit = {
> +        .attr = { .name = "limit", .mode = 0644 },
> +        .show = spitz_bat_limit_show,
> +        .store = spitz_bat_limit_store,
> +};
> +#endif
> +
> +static int __devinit spitz_bat_probe(struct platform_device *dev)
> +{
> +       int ret;
> +       int i;
> +
> +       if (!machine_is_spitz())
> +               return -ENODEV;
> +
> +       printk("spitz_bat_probe: register\n");
> +       power_supply_register(&dev->dev, &spitz_bat_main.psy);
> +       power_supply_register(&dev->dev, &spitz_ac.psy);
> +       device_create_file(&dev->dev, &dev_attr_limit);
> +
> +       return 0;
> +}
> +
> +static int __devexit spitz_bat_remove(struct platform_device *dev)
> +{
> +       int i;
> +
> +       device_remove_file(&dev->dev, &dev_attr_limit);
> +       power_supply_unregister(&spitz_bat_main.psy);
> +       power_supply_unregister(&spitz_ac.psy);
> +       return 0;
> +}
> +
> +
> +static struct platform_driver spitz_bat_driver = {
> +       .driver.name    = "spitz-battery",
> +       .driver.owner   = THIS_MODULE,
> +       .probe          = spitz_bat_probe,
> +       .remove         = __devexit_p(spitz_bat_remove),
> +       .suspend        = spitz_bat_suspend,
> +       .resume         = spitz_bat_resume,
> +};
> +
> +static int __init spitz_bat_init(void)
> +{
> +       return platform_driver_register(&spitz_bat_driver);
> +}
> +
> +static void __exit spitz_bat_exit(void)
> +{
> +       platform_driver_unregister(&spitz_bat_driver);
> +}
> +
> +module_init(spitz_bat_init);
> +module_exit(spitz_bat_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Pavel Machek");
> +MODULE_DESCRIPTION("Spitz battery driver");
> +MODULE_ALIAS("platform:spitz-battery");
> diff -ur ./drivers/video/backlight.ofic/corgi_lcd.c ./drivers/video/backlight/corgi_lcd.c
> --- ./drivers/video/backlight.ofic/corgi_lcd.c  2009-10-18 18:11:36.000000000 +0200
> +++ ./drivers/video/backlight/corgi_lcd.c       2009-10-18 18:37:09.000000000 +0200
> @@ -388,17 +388,33 @@
>        .set_mode       = corgi_lcd_set_mode,
>  };
>
> -static int corgi_bl_get_intensity(struct backlight_device *bd)
> +int corgi_bl_get_intensity(struct backlight_device *bd)
>  {
>        struct corgi_lcd *lcd = dev_get_drvdata(&bd->dev);
>
>        return lcd->intensity;
>  }
> +EXPORT_SYMBOL(corgi_bl_get_intensity);
> +
> +int backlight_current;
> +EXPORT_SYMBOL(backlight_current);
>
>  static int corgi_bl_set_intensity(struct corgi_lcd *lcd, int intensity)
>  {
>        int cont;
>
> +       backlight_current = 0;
> +       if (intensity > 0)
> +               backlight_current = 55;
> +       if (intensity > 10)
> +               backlight_current = 115;
> +       if (intensity > 20)
> +               backlight_current = 140;
> +       if (intensity > 30)
> +               backlight_current = 180;
> +       if (intensity > 45)
> +               backlight_current = 245;
> +
>        if (intensity > 0x10)
>                intensity += 0x10;
>
> @@ -433,8 +449,9 @@
>
>        if (corgibl_flags & CORGIBL_SUSPENDED)
>                intensity = 0;
> -       if (corgibl_flags & CORGIBL_BATTLOW)
> -               intensity &= lcd->limit_mask;
> +
> +       if ((corgibl_flags & CORGIBL_BATTLOW) && intensity > lcd->limit_mask)
> +               intensity = lcd->limit_mask;
>
>        return corgi_bl_set_intensity(lcd, intensity);
>  }
> diff -ur ./arch/arm.ofic/mach-pxa/corgi_pm.c ./arch/arm/mach-pxa/corgi_pm.c
> --- ./arch/arm.ofic/mach-pxa/corgi_pm.c 2009-09-10 00:13:59.000000000 +0200
> +++ ./arch/arm/mach-pxa/corgi_pm.c      2009-10-22 19:19:02.000000000 +0200
> @@ -35,6 +35,92 @@
>  #define SHARPSL_FATAL_ACIN_VOLT        182   /* 3.45V */
>  #define SHARPSL_FATAL_NOACIN_VOLT      170   /* 3.40V */
>
> +static const struct battery_thresh corgi_battery_levels_acin[] = {
> +       { 213, 100},
> +       { 212,  98},
> +       { 211,  95},
> +       { 210,  93},
> +       { 209,  90},
> +       { 208,  88},
> +       { 207,  85},
> +       { 206,  83},
> +       { 205,  80},
> +       { 204,  78},
> +       { 203,  75},
> +       { 202,  73},
> +       { 201,  70},
> +       { 200,  68},
> +       { 199,  65},
> +       { 198,  63},
> +       { 197,  60},
> +       { 196,  58},
> +       { 195,  55},
> +       { 194,  53},
> +       { 193,  50},
> +       { 192,  48},
> +       { 192,  45},
> +       { 191,  43},
> +       { 191,  40},
> +       { 190,  38},
> +       { 190,  35},
> +       { 189,  33},
> +       { 188,  30},
> +       { 187,  28},
> +       { 186,  25},
> +       { 185,  23},
> +       { 184,  20},
> +       { 183,  18},
> +       { 182,  15},
> +       { 181,  13},
> +       { 180,  10},
> +       { 179,   8},
> +       { 178,   5},
> +       {   0,   0},
> +};
> +
> +static const struct battery_thresh  corgi_battery_levels_noac[] = {
> +       { 213, 100},
> +       { 212,  98},
> +       { 211,  95},
> +       { 210,  93},
> +       { 209,  90},
> +       { 208,  88},
> +       { 207,  85},
> +       { 206,  83},
> +       { 205,  80},
> +       { 204,  78},
> +       { 203,  75},
> +       { 202,  73},
> +       { 201,  70},
> +       { 200,  68},
> +       { 199,  65},
> +       { 198,  63},
> +       { 197,  60},
> +       { 196,  58},
> +       { 195,  55},
> +       { 194,  53},
> +       { 193,  50},
> +       { 192,  48},
> +       { 191,  45},
> +       { 190,  43},
> +       { 189,  40},
> +       { 188,  38},
> +       { 187,  35},
> +       { 186,  33},
> +       { 185,  30},
> +       { 184,  28},
> +       { 183,  25},
> +       { 182,  23},
> +       { 181,  20},
> +       { 180,  18},
> +       { 179,  15},
> +       { 178,  13},
> +       { 177,  10},
> +       { 176,   8},
> +       { 175,   5},
> +       {   0,   0},
> +};
> +
>  static void corgi_charger_init(void)
>  {
>        pxa_gpio_mode(CORGI_GPIO_ADC_TEMP_ON | GPIO_OUT);
> @@ -214,8 +300,8 @@
>        .fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
>        .fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
>        .bat_levels       = 40,
> -       .bat_levels_noac  = spitz_battery_levels_noac,
> -       .bat_levels_acin  = spitz_battery_levels_acin,
> +       .bat_levels_noac  = corgi_battery_levels_noac,
> +       .bat_levels_acin  = corgi_battery_levels_acin,
>        .status_high_acin = 188,
>        .status_low_acin  = 178,
>        .status_high_noac = 185,
> diff -ur ./arch/arm.ofic/mach-pxa/sharpsl.h ./arch/arm/mach-pxa/sharpsl.h
> --- ./arch/arm.ofic/mach-pxa/sharpsl.h  2009-09-10 00:13:59.000000000 +0200
> +++ ./arch/arm/mach-pxa/sharpsl.h       2009-10-14 12:12:13.000000000 +0200
> @@ -42,8 +42,23 @@
>  #define MAX1111_BATT_TEMP   2u
>  #define MAX1111_ACIN_VOLT   6u
>
> -extern struct battery_thresh spitz_battery_levels_acin[];
> -extern struct battery_thresh spitz_battery_levels_noac[];
>  int sharpsl_pm_pxa_read_max1111(int channel);
>
>
> +/*
> + * Constants
> + */
> +#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
> +#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
> +#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
> +#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
> +
> +#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
> +#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
> +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
> +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
> +#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
> +#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
> +#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
> +#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
> +
> Only in ./arch/arm/mach-pxa: sharpsl.h~
> diff -ur ./arch/arm.ofic/mach-pxa/sharpsl_pm.c ./arch/arm/mach-pxa/sharpsl_pm.c
> --- ./arch/arm.ofic/mach-pxa/sharpsl_pm.c       2009-10-06 13:48:07.000000000 +0200
> +++ ./arch/arm/mach-pxa/sharpsl_pm.c    2009-10-14 12:12:05.000000000 +0200
> @@ -32,25 +32,10 @@
>  #include <mach/regs-rtc.h>
>  #include <mach/sharpsl.h>
>  #include <mach/sharpsl_pm.h>
> +#include <mach/spitz.h>
>
>  #include "sharpsl.h"
>
> -/*
> - * Constants
> - */
> -#define SHARPSL_CHARGE_ON_TIME_INTERVAL        (msecs_to_jiffies(1*60*1000))  /* 1 min */
> -#define SHARPSL_CHARGE_FINISH_TIME             (msecs_to_jiffies(10*60*1000)) /* 10 min */
> -#define SHARPSL_BATCHK_TIME                    (msecs_to_jiffies(15*1000))    /* 15 sec */
> -#define SHARPSL_BATCHK_TIME_SUSPEND            (60*10)                        /* 10 min */
> -
> -#define SHARPSL_WAIT_CO_TIME                   15  /* 15 sec */
> -#define SHARPSL_WAIT_DISCHARGE_ON              100 /* 100 msec */
> -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP   10  /* 10 msec */
> -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT   10  /* 10 msec */
> -#define SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN   10  /* 10 msec */
> -#define SHARPSL_CHARGE_WAIT_TIME               15  /* 15 msec */
> -#define SHARPSL_CHARGE_CO_CHECK_TIME           5   /* 5 msec */
> -#define SHARPSL_CHARGE_RETRY_CNT               1   /* eqv. 10 min */
>
>  /*
>  * Prototypes
> @@ -72,112 +57,28 @@
>  * Variables
>  */
>  struct sharpsl_pm_status sharpsl_pm;
> +EXPORT_SYMBOL(sharpsl_pm);
>  static DECLARE_DELAYED_WORK(toggle_charger, sharpsl_charge_toggle);
>  static DECLARE_DELAYED_WORK(sharpsl_bat, sharpsl_battery_thread);
>  DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
>
>
>
> -struct battery_thresh spitz_battery_levels_acin[] = {
> -       { 213, 100},
> -       { 212,  98},
> -       { 211,  95},
> -       { 210,  93},
> -       { 209,  90},
> -       { 208,  88},
> -       { 207,  85},
> -       { 206,  83},
> -       { 205,  80},
> -       { 204,  78},
> -       { 203,  75},
> -       { 202,  73},
> -       { 201,  70},
> -       { 200,  68},
> -       { 199,  65},
> -       { 198,  63},
> -       { 197,  60},
> -       { 196,  58},
> -       { 195,  55},
> -       { 194,  53},
> -       { 193,  50},
> -       { 192,  48},
> -       { 192,  45},
> -       { 191,  43},
> -       { 191,  40},
> -       { 190,  38},
> -       { 190,  35},
> -       { 189,  33},
> -       { 188,  30},
> -       { 187,  28},
> -       { 186,  25},
> -       { 185,  23},
> -       { 184,  20},
> -       { 183,  18},
> -       { 182,  15},
> -       { 181,  13},
> -       { 180,  10},
> -       { 179,   8},
> -       { 178,   5},
> -       {   0,   0},
> -};
> -
> -struct battery_thresh  spitz_battery_levels_noac[] = {
> -       { 213, 100},
> -       { 212,  98},
> -       { 211,  95},
> -       { 210,  93},
> -       { 209,  90},
> -       { 208,  88},
> -       { 207,  85},
> -       { 206,  83},
> -       { 205,  80},
> -       { 204,  78},
> -       { 203,  75},
> -       { 202,  73},
> -       { 201,  70},
> -       { 200,  68},
> -       { 199,  65},
> -       { 198,  63},
> -       { 197,  60},
> -       { 196,  58},
> -       { 195,  55},
> -       { 194,  53},
> -       { 193,  50},
> -       { 192,  48},
> -       { 191,  45},
> -       { 190,  43},
> -       { 189,  40},
> -       { 188,  38},
> -       { 187,  35},
> -       { 186,  33},
> -       { 185,  30},
> -       { 184,  28},
> -       { 183,  25},
> -       { 182,  23},
> -       { 181,  20},
> -       { 180,  18},
> -       { 179,  15},
> -       { 178,  13},
> -       { 177,  10},
> -       { 176,   8},
> -       { 175,   5},
> -       {   0,   0},
> -};
> -
>  /* MAX1111 Commands */
> -#define MAXCTRL_PD0      1u << 0
> -#define MAXCTRL_PD1      1u << 1
> -#define MAXCTRL_SGL      1u << 2
> -#define MAXCTRL_UNI      1u << 3
> +#define MAXCTRL_PD0      (1u << 0)
> +#define MAXCTRL_PD1      (1u << 1)
> +#define MAXCTRL_SGL      (1u << 2)
> +#define MAXCTRL_UNI      (1u << 3)
>  #define MAXCTRL_SEL_SH   4
> -#define MAXCTRL_STR      1u << 7
> +#define MAXCTRL_STR      (1u << 7)
>
>  /*
>  * Read MAX1111 ADC
>  */
>  int sharpsl_pm_pxa_read_max1111(int channel)
>  {
> -       if (machine_is_tosa()) // Ugly, better move this function into another module
> +       /* Ugly, better move this function into another module */
> +       if (machine_is_tosa())
>            return 0;
>
>  #ifdef CONFIG_CORGI_SSP_DEPRECATED
> @@ -193,7 +94,7 @@
>  #endif
>  }
>
> -static int get_percentage(int voltage)
> +int get_percentage(int voltage)
>  {
>        int i = sharpsl_pm.machinfo->bat_levels - 1;
>        int bl_status = sharpsl_pm.machinfo->backlight_get_status ? sharpsl_pm.machinfo->backlight_get_status() : 0;
> @@ -209,6 +110,7 @@
>
>        return thresh[i].percentage;
>  }
> +EXPORT_SYMBOL(get_percentage);
>
>  static int get_apm_status(int voltage)
>  {
> @@ -238,7 +140,7 @@
>
>  static void sharpsl_battery_thread(struct work_struct *private_)
>  {
> -       int voltage, percent, apm_status, i = 0;
> +       int voltage, percent, apm_status, i;
>
>        if (!sharpsl_pm.machinfo)
>                return;
> @@ -250,15 +152,14 @@
>                        && time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
>                schedule_delayed_work(&toggle_charger, 0);
>
> -       while(1) {
> +       for (i = 0; i < 5; i++) {
>                voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
> -
> -               if (voltage > 0) break;
> -               if (i++ > 5) {
> -                       voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
> -                       dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
> +               if (voltage > 0)
>                        break;
> -               }
> +       }
> +       if (voltage <= 0) {
> +               voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
> +               dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
>        }
>
>        voltage = sharpsl_average_value(voltage);
> @@ -266,8 +167,10 @@
>        percent = get_percentage(voltage);
>
>        /* At low battery voltages, the voltage has a tendency to start
> -           creeping back up so we try to avoid this here */
> -       if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
> +          creeping back up so we try to avoid this here */
> +       if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
> +           || (apm_status == APM_BATTERY_STATUS_HIGH)
> +           || percent <= sharpsl_pm.battstat.mainbat_percent) {
>                sharpsl_pm.battstat.mainbat_voltage = voltage;
>                sharpsl_pm.battstat.mainbat_status = apm_status;
>                sharpsl_pm.battstat.mainbat_percent = percent;
> @@ -279,8 +182,8 @@
>  #ifdef CONFIG_BACKLIGHT_CORGI
>        /* If battery is low. limit backlight intensity to save power. */
>        if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
> -                       && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
> -                       (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
> +           && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW)
> +           || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
>                if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
>                        sharpsl_pm.machinfo->backlight_limit(1);
>                        sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
> @@ -293,8 +196,8 @@
>
>        /* Suspend if critical battery level */
>        if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
> -                       && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
> -                       && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
> +            && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
> +            && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
>                sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
>                dev_err(sharpsl_pm.dev, "Fatal Off\n");
>                apm_queue_event(APM_CRITICAL_SUSPEND);
> @@ -339,6 +242,8 @@
>
>  static void sharpsl_charge_error(void)
>  {
> +       dev_warn(sharpsl_pm.dev, "Charger Error\n");
> +
>        sharpsl_pm_led(SHARPSL_LED_ERROR);
>        sharpsl_pm.machinfo->charge(0);
>        sharpsl_pm.charge_mode = CHRG_ERROR;
> @@ -346,7 +251,7 @@
>
>  static void sharpsl_charge_toggle(struct work_struct *private_)
>  {
> -       dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
> +       dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
>
>        if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
>                sharpsl_charge_off();
> @@ -368,7 +273,7 @@
>  {
>        int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
>
> -       dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
> +       dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
>
>        sharpsl_average_clear();
>        if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
> @@ -472,14 +377,14 @@
>        sharpsl_ad[sharpsl_ad_index] = ad;
>        sharpsl_ad_index++;
>        if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
> -               for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
> +               for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
>                        sharpsl_ad[i] = sharpsl_ad[i+1];
>                sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
>        }
> -       for (i=0; i < sharpsl_ad_index; i++)
> +       for (i = 0; i < sharpsl_ad_index; i++)
>                ad_val += sharpsl_ad[i];
>
> -       return (ad_val / sharpsl_ad_index);
> +       return ad_val / sharpsl_ad_index;
>  }
>
>  /*
> @@ -492,8 +397,8 @@
>
>        /* Find MAX val */
>        temp = val[0];
> -       j=0;
> -       for (i=1; i<5; i++) {
> +       j = 0;
> +       for (i = 1; i < 5; i++) {
>                if (temp < val[i]) {
>                        temp = val[i];
>                        j = i;
> @@ -502,21 +407,21 @@
>
>        /* Find MIN val */
>        temp = val[4];
> -       k=4;
> -       for (i=3; i>=0; i--) {
> +       k = 4;
> +       for (i = 3; i >= 0; i--) {
>                if (temp > val[i]) {
>                        temp = val[i];
>                        k = i;
>                }
>        }
>
> -       for (i=0; i<5; i++)
> -               if (i != j && i != k )
> +       for (i = 0; i < 5; i++)
> +               if (i != j && i != k)
>                        sum += val[i];
>
>        dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
>
> -       return (sum/3);
> +       return sum/3;
>  }
>
>  static int sharpsl_check_battery_temp(void)
> @@ -524,7 +429,7 @@
>        int val, i, buff[5];
>
>        /* Check battery temperature */
> -       for (i=0; i<5; i++) {
> +       for (i = 0; i < 5; i++) {
>                mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
>                sharpsl_pm.machinfo->measure_temp(1);
>                mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
> @@ -535,8 +440,10 @@
>        val = get_select_val(buff);
>
>        dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
> -       if (val > sharpsl_pm.machinfo->charge_on_temp) {
> -               printk(KERN_WARNING "Not charging: temperature out of limits.\n");
> +       /* FIXME: this should catch battery read errors, but we should
> +          probably avoid charging in <0C temperatures, too. */
> +       if ((val < 0) || (val > sharpsl_pm.machinfo->charge_on_temp)) {
> +               dev_warn(sharpsl_pm.dev, "Not charging: temperature %d out of limits.\n", val);
>                return -1;
>        }
>
> @@ -557,7 +464,7 @@
>                sharpsl_pm.machinfo->discharge1(1);
>
>        /* Check battery voltage */
> -       for (i=0; i<5; i++) {
> +       for (i = 0; i < 5; i++) {
>                buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
>                mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
>        }
> @@ -581,16 +488,16 @@
>  {
>        int temp, i, buff[5];
>
> -       for (i=0; i<5; i++) {
> +       for (i = 0; i < 5; i++) {
>                buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
>                mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
>        }
>
>        temp = get_select_val(buff);
> -       dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
> +       dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
>
>        if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
> -               dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
> +               dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
>                return -1;
>        }
>
> @@ -624,9 +531,9 @@
>
>  static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
>  {
> -       dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
> +       dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
>
> -       dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
> +       dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
>        /* not charging and AC-IN! */
>
>        if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
> @@ -644,12 +551,12 @@
>        if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
>                RTSR &= RTSR_ALE;
>                RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
> -               dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
> +               dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
>                sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
>        } else if (alarm_enable) {
>                RTSR &= RTSR_ALE;
>                RTAR = alarm_time;
> -               dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
> +               dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
>        } else {
>                dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
>        }
> @@ -658,19 +565,20 @@
>
>        sharpsl_pm.machinfo->postsuspend();
>
> -       dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
> +
> +       dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
>  }
>
>  static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
>  {
> -       if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
> -       {
> +  return 0;
> +       if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
>                if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
>                        dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
>                        corgi_goto_sleep(alarm_time, alarm_enable, state);
>                        return 1;
>                }
> -               if(sharpsl_off_charge_battery()) {
> +               if (sharpsl_off_charge_battery()) {
>                        dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
>                        corgi_goto_sleep(alarm_time, alarm_enable, state);
>                        return 1;
> @@ -697,7 +605,7 @@
>
>        corgi_goto_sleep(alarm_time, alarm_status, state);
>
> -       while (corgi_enter_suspend(alarm_time,alarm_status,state))
> +       while (corgi_enter_suspend(alarm_time, alarm_status, state))
>                {}
>
>        if (sharpsl_pm.machinfo->earlyresume)
> @@ -732,7 +640,7 @@
>                sharpsl_pm.machinfo->discharge1(1);
>
>        /* Check battery : check inserting battery ? */
> -       for (i=0; i<5; i++) {
> +       for (i = 0; i < 5; i++) {
>                buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
>                mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
>        }
> @@ -812,7 +720,7 @@
>                mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
>
>                time = RCNR;
> -               while(1) {
> +               while (1) {
>                        /* Check if any wakeup event had occurred */
>                        if (sharpsl_pm.machinfo->charger_wakeup() != 0)
>                                return 0;
> @@ -835,9 +743,9 @@
>        mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
>
>        time = RCNR;
> -       while(1) {
> +       while (1) {
>                /* Check if any wakeup event had occurred */
> -               if (sharpsl_pm.machinfo->charger_wakeup() != 0)
> +               if (sharpsl_pm.machinfo->charger_wakeup())
>                        return 0;
>                /* Check for timeout */
>                if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
> @@ -864,12 +772,12 @@
>
>  static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
>  {
> -       return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
> +       return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
>  }
>
>  static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
>  {
> -       return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
> +       return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
>  }
>
>  static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
> @@ -943,7 +851,6 @@
>                }
>        }
>
> -       if (sharpsl_pm.machinfo->batfull_irq)
> -       {
> +       if (sharpsl_pm.machinfo->batfull_irq) {
>                /* Register interrupt handler. */
>                if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
> diff -ur ./arch/arm.ofic/mach-pxa/spitz.c ./arch/arm/mach-pxa/spitz.c
> --- ./arch/arm.ofic/mach-pxa/spitz.c    2009-10-06 13:48:07.000000000 +0200
> +++ ./arch/arm/mach-pxa/spitz.c 2009-10-14 11:01:36.000000000 +0200
> @@ -686,12 +733,19 @@
>        .dev.platform_data = &sharpsl_rom_data,
>  };
>
> +static struct platform_device spitz_battery_device = {
> +       .name   = "spitz-battery",
> +       .id     = -1,
> +};
> +
> +
>  static struct platform_device *devices[] __initdata = {
>        &spitzscoop_device,
>        &spitzkbd_device,
>        &spitzled_device,
>        &sharpsl_nand_device,
>        &sharpsl_rom_device,
> +       &spitz_battery_device,
>  };
>
>  static void spitz_poweroff(void)
> --- ./arch/arm.ofic/mach-pxa/spitz_pm.c 2009-09-10 00:13:59.000000000 +0200
> +++ ./arch/arm/mach-pxa/spitz_pm.c      2009-10-19 07:28:42.000000000 +0200
> @@ -37,6 +37,93 @@
>
>  static int spitz_last_ac_status;
>
> +static const struct battery_thresh spitz_battery_levels_acin[] = {
> +       { 213, 100},
> +       { 212,  98},
> +       { 211,  95},
> +       { 210,  93},
> +       { 209,  90},
> +       { 208,  88},
> +       { 207,  85},
> +       { 206,  83},
> +       { 205,  80},
> +       { 204,  78},
> +       { 203,  75},
> +       { 202,  73},
> +       { 201,  70},
> +       { 200,  68},
> +       { 199,  65},
> +       { 198,  63},
> +       { 197,  60},
> +       { 196,  58},
> +       { 195,  55},
> +       { 194,  53},
> +       { 193,  50},
> +       { 192,  48},
> +       { 192,  45},
> +       { 191,  43},
> +       { 191,  40},
> +       { 190,  38},
> +       { 190,  35},
> +       { 189,  33},
> +       { 188,  30},
> +       { 187,  28},
> +       { 186,  25},
> +       { 185,  23},
> +       { 184,  20},
> +       { 183,  18},
> +       { 182,  15},
> +       { 181,  13},
> +       { 180,  10},
> +       { 179,   8},
> +       { 178,   5},
> +       {   0,   0},
> +};
> +
> +static const struct battery_thresh  spitz_battery_levels_noac[] = {
> +       { 213, 100},
> +       { 212,  98},
> +       { 211,  95},
> +       { 210,  93},
> +       { 209,  90},
> +       { 208,  88},
> +       { 207,  85},
> +       { 206,  83},
> +       { 205,  80},
> +       { 204,  78},
> +       { 203,  75},
> +       { 202,  73},
> +       { 201,  70},
> +       { 200,  68},
> +       { 199,  65},
> +       { 198,  63},
> +       { 197,  60},
> +       { 196,  58},
> +       { 195,  55},
> +       { 194,  53},
> +       { 193,  50},
> +       { 192,  48},
> +       { 191,  45},
> +       { 190,  43},
> +       { 189,  40},
> +       { 188,  38},
> +       { 187,  35},
> +       { 186,  33},
> +       { 185,  30},
> +       { 184,  28},
> +       { 183,  25},
> +       { 182,  23},
> +       { 181,  20},
> +       { 180,  18},
> +       { 179,  15},
> +       { 178,  13},
> +       { 177,  10},
> +       { 176,   8},
> +       { 175,   5},
> +       {   0,   0},
> +};
> +
> +
>  static void spitz_charger_init(void)
>  {
>        pxa_gpio_mode(SPITZ_GPIO_KEY_INT | GPIO_IN);
> @@ -103,7 +190,7 @@
>        PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
>        PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC;
>        PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
> -       PKSR = 0xffffffff; // clear
> +       PKSR = 0xffffffff; /* clear */
>
>        /* nRESET_OUT Disable */
>        PSLR |= PSLR_SL_ROD;
> @@ -149,7 +236,7 @@
>        if (resume_on_alarm && (PEDR & PWER_RTC))
>                is_resume |= PWER_RTC;
>
> -       dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
> +       dev_dbg(sharpsl_pm.dev, "is_resume: %x\n", is_resume);
>        return is_resume;
>  }
>
> @@ -160,15 +247,15 @@
>
>  unsigned long spitzpm_read_devdata(int type)
>  {
> -       switch(type) {
> +       switch (type) {
>        case SHARPSL_STATUS_ACIN:
>                return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
>        case SHARPSL_STATUS_LOCK:
> -               return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
> +               return !!READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batlock);
>        case SHARPSL_STATUS_CHRGFULL:
> -               return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
> +               return !!READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_batfull);
>        case SHARPSL_STATUS_FATAL:
> -               return READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
> +               return !!READ_GPIO_BIT(sharpsl_pm.machinfo->gpio_fatal);
>        case SHARPSL_ACIN_VOLT:
>                return sharpsl_pm_pxa_read_max1111(MAX1111_ACIN_VOLT);
>        case SHARPSL_BATT_TEMP:
> @@ -179,6 +266,11 @@
>        }
>  }
>
> +int backlight_get_status(void)
> +{
> +       return 0;
> +}
> +
>  struct sharpsl_charger_machinfo spitz_pm_machinfo = {
>        .init             = spitz_charger_init,
>        .exit             = NULL,
> @@ -199,8 +291,9 @@
>  #if defined(CONFIG_LCD_CORGI)
>        .backlight_limit = corgi_lcd_limit_intensity,
>  #elif defined(CONFIG_BACKLIGHT_CORGI)
> -        .backlight_limit  = corgibl_limit_intensity,
> +       .backlight_limit  = corgibl_limit_intensity,
>  #endif
> +//     .backlight_get_status = backlight_get_status,
>        .charge_on_volt   = SHARPSL_CHARGE_ON_VOLT,
>        .charge_on_temp   = SHARPSL_CHARGE_ON_TEMP,
>        .charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
> @@ -241,7 +334,7 @@
>
>  static void spitzpm_exit(void)
>  {
> -       platform_device_unregister(spitzpm_device);
> +       platform_device_unregister(spitzpm_device);
>  }
>
>  module_init(spitzpm_init);
>
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
>



More information about the linux-arm-kernel mailing list