October 2011 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sat Oct 1 06:39:21 EDT 2011
Ending: Mon Oct 31 23:26:46 EDT 2011
Messages: 3264

• "dma-mapping: fix for speculative prefetching" patch for 2.6.31.2   吳信賢
• [ resend PATCH 1/1] ARM: i.MX28: shift frac value in _CLK_SET_RATE   Matt Burtch
• [ resend PATCH 1/1] ARM: i.MX28: shift frac value in _CLK_SET_RATE   Fabio Estevam
• [ resend PATCH 1/1] ARM: i.MX28: shift frac value in _CLK_SET_RATE   Sascha Hauer
• [ resend PATCH 1/1] ARM: i.MX28: shift frac value in _CLK_SET_RATE   Matt Burtch
• [ v2 resend PATCH 1/1] ARM: i.MX28: shift frac value in _CLK_SET_RATE   Matt Burtch
• [[PATCH v6] 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards   Peter De Schrijver
• [[PATCH v6] 2/3] arm/tegra: add support for ventana pinmuxing   Peter De Schrijver
• [[PATCH v6] 3/3] arm/tegra: device tree support for ventana board   Peter De Schrijver
• [[PATCH v7] 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards   Peter De Schrijver
• [alsa-devel] [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB   Mark Brown
• [alsa-devel] [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB   Arnd Bergmann
• [alsa-devel] [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB   Mark Brown
• [alsa-devel] [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB   Arnd Bergmann
• [alsa-devel] [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB   Mark Brown
• [alsa-devel] [PATCH 5/6] ASoC: samsung: fix Kconfig dependencies   Sangbeom Kim
• [alsa-devel] [PATCH 5/6] ASoC: samsung: fix Kconfig dependencies   Arnd Bergmann
• [alsa-devel] [PATCH 5/6] ASoC: samsung: fix Kconfig dependencies   Mark Brown
• [alsa-devel] [PATCH v3 0/3] ARM: mxs: add recording support for saif   Dong Aisheng
• [ANNOUNCE] [OFFTOPIC] Xvisor: eXtensible Versatile hypervISOR   Anup Patel
• [AT91 PULL for 3.2] boards merge + gpio rework   Jean-Christophe PLAGNIOL-VILLARD
• [AT91 PULL for 3.2] boards merge + gpio rework   Nicolas Ferre
• [GIT PULL] ARM: CSR: cleanup some minor coding-style issues for 3.2   Arnd Bergmann
• [GIT PULL] ARM: CSR: l2x0 init cleanup for 3.2   Arnd Bergmann
• [GIT PULL] ARM: CSR: l2x0 init cleanup for 3.2   Barry Song
• [GIT PULL] ARM: CSR: l2x0 init cleanup for 3.2   Barry Song
• [GIT PULL] ARM: CSR: l2x0 init cleanup for 3.2   Arnd Bergmann
• [GIT PULL] ARM: OMAP3+: clock fixes for 3.2   Paul Walmsley
• [GIT PULL] ARM: OMAP3+: clock fixes for 3.2   Paul Walmsley
• [GIT PULL] ARM: OMAP: DSS hwmod/reset fixes for 3.2   Paul Walmsley
• [GIT PULL] ARM: OMAP: new miscellaneous clock/hwmod data for 3.2   Paul Walmsley
• [GIT PULL] ARM: OMAP: PRCM/SCM/hwmod miscellaneous fixes for 3.2   Paul Walmsley
• [GIT PULL] ARM: OMAP: Runtime PM/hwmod conversion for HS USBHOST   Paul Walmsley
• [GIT PULL] assorted i.MX fixes   Sascha Hauer
• [GIT PULL] assorted i.MX fixes   Arnd Bergmann
• [GIT PULL] at91 device tree basics   Nicolas Ferre
• [GIT PULL] at91 device tree basics   Arnd Bergmann
• [GIT PULL] at91 fixes for 3.1   Nicolas Ferre
• [GIT PULL] at91: driver for Atmel true hardware random number generator   Nicolas Ferre
• [GIT PULL] at91: driver for Atmel true hardware random number generator   Nicolas Ferre
• [GIT PULL] at91: driver for Atmel true hardware random number generator   Arnd Bergmann
• [GIT PULL] Calxeda Highbank platform support   Rob Herring
• [GIT PULL] Calxeda Highbank platform support   Arnd Bergmann
• [GIT PULL] DEBUG_LL platform updates for 3.2   Will Deacon
• [GIT PULL] DEBUG_LL platform updates for 3.2   Arnd Bergmann
• [GIT PULL] DEBUG_LL platform updates for 3.2   Will Deacon
• [GIT PULL] DEBUG_LL platform updates for 3.2   Arnd Bergmann
• [GIT PULL] DEBUG_LL platform updates for 3.2   Will Deacon
• [GIT PULL] DEBUG_LL platform updates for 3.2   Shawn Guo
• [GIT PULL] DEBUG_LL platform updates for 3.2   Arnd Bergmann
• [GIT PULL] DEBUG_LL platform updates for 3.2   Will Deacon
• [GIT PULL] DEBUG_LL platform updates for 3.2   Will Deacon
• [GIT PULL] DEBUG_LL platform updates for 3.2   Arnd Bergmann
• [GIT PULL] DEBUG_LL platform updates for 3.2   Nicolas Pitre
• [GIT PULL] DEBUG_LL platform updates for 3.2   Arnd Bergmann
• [GIT PULL] DEBUG_LL platform updates for 3.2   Jamie Iles
• [GIT PULL] DEBUG_LL platform updates for 3.2   Russell King - ARM Linux
• [GIT PULL] DEBUG_LL platform updates for 3.2   Will Deacon
• [GIT PULL] DEBUG_LL platform updates for 3.2   Russell King - ARM Linux
• [GIT PULL] DEBUG_LL platform updates for 3.2   Will Deacon
• [GIT PULL] DEBUG_LL platform updates for 3.2   Nicolas Pitre
• [GIT PULL] DEBUG_LL platform updates for 3.2   Russell King - ARM Linux
• [GIT PULL] DEBUG_LL platform updates for 3.2   Russell King - ARM Linux
• [GIT PULL] DEBUG_LL platform updates for 3.2   Nicolas Pitre
• [GIT PULL] DEBUG_LL platform updates for 3.2   Russell King - ARM Linux
• [GIT PULL] DEBUG_LL platform updates for 3.2   Arnd Bergmann
• [GIT PULL] DEBUG_LL platform updates for 3.2   Nicolas Pitre
• [GIT PULL] DEBUG_LL platform updates for 3.2   Nicolas Pitre
• [GIT PULL] DEBUG_LL platform updates for 3.2   Ryan Mallon
• [GIT PULL] DEBUG_LL platform updates for 3.2   Ryan Mallon
• [GIT PULL] DEBUG_LL platform updates for 3.2   Nicolas Pitre
• [GIT PULL] DEBUG_LL platform updates for 3.2   Russell King - ARM Linux
• [GIT PULL] DEBUG_LL platform updates for 3.2   Will Deacon
• [GIT PULL] DEBUG_LL platform updates for 3.2   Arnd Bergmann
• [GIT PULL] DEBUG_LL platform updates for 3.2   Will Deacon
• [GIT PULL] DEBUG_LL platform updates for 3.2   Rob Herring
• [GIT PULL] DEBUG_LL platform updates for 3.2   Arnd Bergmann
• [GIT PULL] DEBUG_LL platform updates for 3.2   Will Deacon
• [GIT PULL] DEBUG_LL platform updates for 3.2   Rob Herring
• [GIT PULL] DEBUG_LL platform updates for 3.2   Rob Herring
• [GIT PULL] dmtimer changes for v3.2 merge window   Arnd Bergmann
• [GIT PULL] dmtimer changes for v3.2 merge window   Tony Lindgren
• [GIT PULL] final arm-soc fixes for 3.1   Arnd Bergmann
• [GIT PULL] genirq support for GIC PPIs   Marc Zyngier
• [GIT PULL] genirq support for GIC PPIs   Russell King - ARM Linux
• [GIT PULL] genirq support for GIC PPIs   Marc Zyngier
• [GIT PULL] genirq support for GIC PPIs   Russell King - ARM Linux
• [GIT PULL] genirq support for GIC PPIs   Marc Zyngier
• [GIT PULL] GIC DT binding support   Rob Herring
• [GIT PULL] GIC DT binding support   Shawn Guo
• [GIT PULL] GIC DT binding support   Domenico Andreoli
• [GIT PULL] GIC DT binding support   Rob Herring
• [GIT PULL] GIC DT binding support   Domenico Andreoli
• [GIT PULL] GIC DT binding support   Rob Herring
• [GIT PULL] GIC DT binding support   Shawn Guo
• [GIT PULL] GIC DT binding support   Russell King - ARM Linux
• [GIT PULL] GIC DT binding support   Arnd Bergmann
• [GIT PULL] GIC DT binding support   Rob Herring
• [GIT PULL] GIC DT binding support   Arnd Bergmann
• [GIT PULL] GIC DT binding support   Rob Herring
• [GIT PULL] GIC DT binding support   Russell King - ARM Linux
• [GIT PULL] GIC DT binding support   Arnd Bergmann
• [GIT PULL] GIC DT binding support   Rob Herring
• [GIT PULL] GIC DT binding support   Russell King - ARM Linux
• [GIT PULL] GIC DT binding support   Arnd Bergmann
• [GIT PULL] GIC DT binding support   Arnd Bergmann
• [GIT PULL] GIC DT binding support   Russell King - ARM Linux
• [GIT PULL] GIC DT binding support   Arnd Bergmann
• [GIT PULL] GIC DT binding support   Rob Herring
• [GIT PULL] GIC DT binding support   Russell King - ARM Linux
• [GIT PULL] GIC DT binding support   Rob Herring
• [GIT PULL] GIC DT binding support   Rob Herring
• [GIT PULL] GIC DT binding support   Arnd Bergmann
• [GIT PULL] GIC DT binding support   Arnd Bergmann
• [GIT PULL] GIC DT binding support   Rob Herring
• [GIT PULL] hwspinlock changes for 3.2   Ohad Ben-Cohen
• [GIT PULL] i.MX cleanup patches   Sascha Hauer
• [GIT PULL] i.MX cleanup patches   Arnd Bergmann
• [GIT PULL] i.MX features   Sascha Hauer
• [GIT PULL] i.MX features   Arnd Bergmann
• [GIT PULL] i.MX features   Sascha Hauer
• [GIT PULL] i.MX5 devicetree support   Sascha Hauer
• [GIT PULL] i.MX5 devicetree support   Arnd Bergmann
• [GIT PULL] i.MX6Q support   Shawn Guo
• [GIT PULL] i.MX6Q support   Russell King - ARM Linux
• [GIT PULL] i.MX6Q support   Arnd Bergmann
• [GIT PULL] i.MX6Q support   Sascha Hauer
• [GIT PULL] i.MX6Q support   Shawn Guo
• [GIT PULL] i.MX6Q support   Barry Song
• [GIT PULL] i.MX6Q support   Russell King - ARM Linux
• [GIT PULL] i.MX6Q support   Arnd Bergmann
• [GIT PULL] I2C: OMAP: misc. cleanup for v3.2   Ben Dooks
• [GIT PULL] I2C: OMAP: misc. cleanup for v3.2   Kevin Hilman
• [GIT PULL] I2C: OMAP: misc. cleanup for v3.2   Ming Lei
• [GIT PULL] initial omap DT support for v3.2 merge window (Re: [PATCH 26/30] ARM: omap: add board autoselection)   Tony Lindgren
• [GIT PULL] initial omap DT support for v3.2 merge window (Re: [PATCH 26/30] ARM: omap: add board autoselection)   Tony Lindgren
• [GIT PULL] l3 cleanup for v3.2 merge window   Tony Lindgren
• [GIT PULL] omap fixes for -rc series and merge window   Tony Lindgren
• [GIT PULL] omap fixes for -rc series and merge window   Arnd Bergmann
• [GIT PULL] omap fixes for -rc series and merge window   Tony Lindgren
• [GIT PULL] omap fixes for -rc series and merge window   Arnd Bergmann
• [GIT PULL] OMAP4 MPU sub-system PM for v3.2   Kevin Hilman
• [GIT PULL] OMAP: few more PM cleanup/fixes for v3.2   Kevin Hilman
• [GIT PULL] pending DT patches and cleanup for map_io for v3.2 merge window   Tony Lindgren
• [GIT PULL] pending DT patches and cleanup for map_io for v3.2 merge window   Tony Lindgren
• [GIT PULL] pending DT patches and cleanup for map_io for v3.2 merge window   Russell King - ARM Linux
• [GIT PULL] pending DT patches and cleanup for map_io for v3.2 merge window   Arnd Bergmann
• [GIT PULL] Please pull tegra cleanups for 3.2   Olof Johansson
• [GIT PULL] Please pull tegra cleanups for 3.2   Arnd Bergmann
• [GIT PULL] Please pull tegra cleanups for 3.2   Olof Johansson
• [GIT PULL] Please pull tegra cleanups for 3.2   Arnd Bergmann
• [GIT PULL] Please pull tegra feature branch for 3.2   Olof Johansson
• [GIT PULL] Please pull tegra feature branch for 3.2   Olof Johansson
• [GIT PULL] Please pull tegra feature branch for 3.2   Arnd Bergmann
• [GIT PULL] pxa: feature patches for next   Eric Miao
• [GIT PULL] pxa: feature patches for next   Arnd Bergmann
• [GIT PULL] pxa: fixes for next   Eric Miao
• [GIT PULL] pxa: fixes for next   Igor Grinberg
• [GIT PULL] pxa: fixes for next   Eric Miao
• [GIT PULL] pxa: fixes for next   Arnd Bergmann
• [GIT PULL] Samsung board-2 for v3.2   Kukjin Kim
• [GIT PULL] Samsung board-2 for v3.2   Kyungmin Park
• [GIT PULL] Samsung board-2 for v3.2   Arnd Bergmann
• [GIT PULL] Samsung cleanup-2 for v3.2   Kukjin Kim
• [GIT PULL] Samsung cleanup-2 for v3.2   Arnd Bergmann
• [GIT PULL] Samsung cleanup-2 for v3.2   Kukjin Kim
• [GIT PULL] Samsung cleanup-3 for v3.2   Kukjin Kim
• [GIT PULL] Samsung cleanup-3 for v3.2   Arnd Bergmann
• [GIT PULL] Samsung devel-2 for v3.2   Kukjin Kim
• [GIT PULL] Samsung devel-2 for v3.2   Mark Brown
• [GIT PULL] Samsung devel-2 for v3.2   Kukjin Kim
• [GIT PULL] Samsung devel-2 for v3.2   Mark Brown
• [GIT PULL] Samsung devel-2 for v3.2   Russell King - ARM Linux
• [GIT PULL] Samsung devel-2 for v3.2   Mark Brown
• [GIT PULL] Samsung devel-2 for v3.2   Kukjin Kim
• [GIT PULL] Samsung devel-2 for v3.2   Mark Brown
• [GIT PULL] Samsung devel-2 for v3.2   Mark Brown
• [GIT PULL] Samsung devel-2 for v3.2   Mark Brown
• [GIT PULL] Samsung devel-2 for v3.2   Mark Brown
• [GIT PULL] Samsung devel-2 for v3.2   Kukjin Kim
• [GIT PULL] Samsung devel-2 for v3.2   Arnd Bergmann
• [GIT PULL] Samsung devel-2 for v3.2   Mark Brown
• [GIT PULL] Samsung devel-2 for v3.2   Kukjin Kim
• [GIT PULL] Samsung devel-2 for v3.2   Arnd Bergmann
• [GIT PULL] Samsung devel-3 for v3.2   Kukjin Kim
• [GIT PULL] Samsung devel-3 for v3.2   Arnd Bergmann
• [GIT PULL] Samsung Fixes for v3.1   Kukjin Kim
• [git pull] trivial gpio build failure fixups   Grant Likely
• [git pull] trivial gpio build failure fixups   Grant Likely
• [GIT PULL] ux500-timers   Arnd Bergmann
• [GIT PULL] ux500-timers   Linus Walleij
• [GIT PULL] ux500-timers   Linus Walleij
• [GIT PULL] ux500-timers   Linus Walleij
• [GIT PULL] ux500-timers   Arnd Bergmann
• [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping   Krishna Reddy
• [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping   Marek Szyprowski
• [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping   Krishna Reddy
• [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping   Krishna Reddy
• [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping   Marek Szyprowski
• [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping   Krishna Reddy
• [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping   Krishna Reddy
• [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping   Marek Szyprowski
• [Linaro-mm-sig] [PATCH 8/9] ARM: integrate CMA with DMA-mapping subsystem   Subash Patel
• [Linaro-mm-sig] [PATCH 8/9] ARM: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [Linaro-mm-sig] [PATCHv16 0/9] Contiguous Memory Allocator   Ohad Ben-Cohen
• [Linaro-mm-sig] [PATCHv16 0/9] Contiguous Memory Allocator   Clark, Rob
• [Linaro-mm-sig] [PATCHv16 0/9] Contiguous Memory Allocator   Maxime Coquelin
• [Linaro-mm-sig] [PATCHv16 0/9] Contiguous Memory Allocator   Marek Szyprowski
• [Linaro-mm-sig] [PATCHv16 0/9] Contiguous Memory Allocator   Maxime Coquelin
• [Linaro-mm-sig] [PATCHv16 0/9] Contiguous Memory Allocator   Marek Szyprowski
• [Linaro-mm-sig] [PATCHv16 0/9] Contiguous Memory Allocator   Maxime Coquelin
• [Linaro-mm-sig] [PATCHv16 0/9] Contiguous Memory Allocator   Marek Szyprowski
• [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Dave Airlie
• [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Rob Clark
• [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Dave Airlie
• [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Rob Clark
• [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Dave Airlie
• [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Rob Clark
• [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Dave Airlie
• [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Daniel Vetter
• [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Rob Clark
• [PATCH 0/11 v3] ARM: AT91: update gpio implementation   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/14] Sparse fixes for tegra   Olof Johansson
• [PATCH 0/14] Sparse fixes for tegra   Arnd Bergmann
• [PATCH 0/14] Sparse fixes for tegra   Olof Johansson
• [PATCH 0/1] A trio of IXP425 boards   Krzysztof Halasa
• [PATCH 0/1] A trio of IXP425 boards   Richard Cochran
• [PATCH 0/1] A trio of IXP425 boards   Arnd Bergmann
• [PATCH 0/1] arm: omap: remove obsolete IRQF_DISABLED   Michael Opdenacker
• [PATCH 0/2] AM3517EVM: Add support for MMC1   Tony Lindgren
• [PATCH 0/2] ARM: amba: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 0/2] ARM: OMAP2+: timer fixes / cleanup   Benoit Cousson
• [PATCH 0/2] ARM: OMAP2+: timer fixes / cleanup   Cousson, Benoit
• [PATCH 0/2] ARM: OMAP2+: timer fixes / cleanup   Tony Lindgren
• [PATCH 0/2] ARM: OMAP2+: timer fixes / cleanup   DebBarma, Tarun Kanti
• [PATCH 0/2] ARM: OMAP2+: timer fixes / cleanup   DebBarma, Tarun Kanti
• [PATCH 0/2] ARM: OMAP2+: timer fixes / cleanup   Cousson, Benoit
• [PATCH 0/2] ARM: Samsung: Add basic device tree support for Exynos4 boards   Kukjin Kim
• [PATCH 0/2] ARM: Samsung: Add basic device tree support for Exynos4 boards   Thomas Abraham
• [PATCH 0/2] arm: samsung: add device tree support for gic and interrupt combiner   Thomas Abraham
• [PATCH 0/2] Make IPI and localtimer handlers callable from C code   Shawn Guo
• [PATCH 0/2] Make IPI and localtimer handlers callable from C code   Shawn Guo
• [PATCH 0/2] Make IPI and localtimer handlers callable from C code   Russell King - ARM Linux
• [PATCH 0/2] MMC: disable multiblock reads on controllers that don't support them   Steve Sakoman
• [PATCH 0/2] MMC: disable multiblock reads on controllers that don't support them   Chris Ball
• [PATCH 0/2] MMC: disable multiblock reads on controllers that don't support them   Paul Walmsley
• [PATCH 0/2] mmc: mmci: Bugfixes for SDIO   Ulf Hansson
• [PATCH 0/2] mmc: mmci: Improvements for SDIO   Ulf Hansson
• [PATCH 0/2] OMAP: Update nr_irqs field in machine descriptors   Tony Lindgren
• [PATCH 0/2] OMAP: Update nr_irqs field in machine descriptors   Nicolas Pitre
• [PATCH 0/2] OMAP: Update nr_irqs field in machine descriptors   Tony Lindgren
• [PATCH 0/2] OMAP: Update nr_irqs field in machine descriptors   Nicolas Pitre
• [PATCH 0/3 v3] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4 series   Chanwoo Choi
• [PATCH 0/3] ARM 4Kstacks: introduction   Tim Bird
• [PATCH 0/3] ARM 4Kstacks: introduction   Joe Perches
• [PATCH 0/3] ARM 4Kstacks: introduction   Tim Bird
• [PATCH 0/3] ARM 4Kstacks: introduction   Joe Perches
• [PATCH 0/3] ARM 4Kstacks: introduction   Dave Chinner
• [PATCH 0/3] ARM 4Kstacks: introduction   Dave Chinner
• [PATCH 0/3] ARM 4Kstacks: introduction   Andi Kleen
• [PATCH 0/3] ARM 4Kstacks: introduction   Russell King - ARM Linux
• [PATCH 0/3] ARM 4Kstacks: introduction   Arnd Bergmann
• [PATCH 0/3] ARM 4Kstacks: introduction   Tim Bird
• [PATCH 0/3] ARM 4Kstacks: introduction   Tim Bird
• [PATCH 0/3] ARM 4Kstacks: introduction   Måns Rullgård
• [PATCH 0/3] ARM 4Kstacks: introduction   Tim Bird
• [PATCH 0/3] ARM 4Kstacks: introduction   Måns Rullgård
• [PATCH 0/3] ARM 4Kstacks: introduction   Dave Chinner
• [PATCH 0/3] ARM 4Kstacks: introduction   Ming Lei
• [PATCH 0/3] ARM 4Kstacks: introduction   Måns Rullgård
• [PATCH 0/3] ARM 4Kstacks: introduction   Russell King - ARM Linux
• [PATCH 0/3] ARM 4Kstacks: introduction   Andi Kleen
• [PATCH 0/3] ARM 4Kstacks: introduction   Bernd Petrovitsch
• [PATCH 0/3] ARM 4Kstacks: introduction   Tim Bird
• [PATCH 0/3] ARM 4Kstacks: introduction   Russell King - ARM Linux
• [PATCH 0/3] ARM 4Kstacks: introduction   Ming Lei
• [PATCH 0/3] ARM: Samsung: Add device tree support for GIC and Interrupt Combiner   Thomas Abraham
• [PATCH 0/3] ARM: SAMSUNG: Add support for sdhci clock lookup using generic names   Rajeshwari Shinde
• [PATCH 0/3] ASV support for Exynos4 series   Jongpill Lee
• [PATCH 0/3] Device tree support for TWL regulators   Rajendra Nayak
• [PATCH 0/3] GIC OF bindings   Rob Herring
• [PATCH 0/3] GIC OF bindings   Thomas Abraham
• [PATCH 0/3] mmc: sdhci-s3c: Add device tree support for Samsung's sdhci controller driver   Thomas Abraham
• [PATCH 0/3] mmc: sdhci-s3c: Remove 'clk_type' member from platform data   Thomas Abraham
• [PATCH 0/4] ARM: at91 rename at91 ref boards defconfig as soc defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210   Russell King - ARM Linux
• [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210   Russell King - ARM Linux
• [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210   Kukjin Kim
• [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210   Rafael J. Wysocki
• [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210   Rafael J. Wysocki
• [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210   Sylwester Nawrocki
• [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210   Rafael J. Wysocki
• [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210   Rafael J. Wysocki
• [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210   Kukjin Kim
• [PATCH 0/4] ARM: OMAP3: cm-t35/cm-t3730 fixes   Igor Grinberg
• [PATCH 0/4] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Vishwanath BS
• [PATCH 0/4] initialize omap SRAM later on with __arm_ioremap_exec()   Santosh Shilimkar
• [PATCH 0/4] initialize omap SRAM later on with __arm_ioremap_exec()   Tony Lindgren
• [PATCH 0/4] initialize omap SRAM later on with __arm_ioremap_exec()   Santosh Shilimkar
• [PATCH 0/4] initialize omap SRAM later on with __arm_ioremap_exec()   Tony Lindgren
• [PATCH 0/4] initialize omap SRAM later on with __arm_ioremap_exec()   Nicolas Pitre
• [PATCH 0/4] initialize omap SRAM later on with __arm_ioremap_exec()   Tony Lindgren
• [PATCH 0/5 v4] ARM Realview PCIX patch series   Colin Tuckley
• [PATCH 0/5] Driver Probe Deferral Mechanism   Greg KH
• [PATCH 0/5] Driver Probe Deferral Mechanism   G, Manjunath Kondaiah
• [PATCH 0/5] Fix indirect inclusion to <mach/hardware.h>   Shawn Guo
• [PATCH 0/6] Add support for tegra30 and cardhu   pdeschrijver at nvidia.com
• [PATCH 0/6] ASoC fixes from ARM randconfig builds   Arnd Bergmann
• [PATCH 0/6] ux500: Export SoC information and some platform clean-up   Lee Jones
• [PATCH 0/7] Introducing a generic AMP framework   Ohad Ben-Cohen
• [PATCH 0/7] Introducing a generic AMP framework   Rusty Russell
• [PATCH 0/7] Introducing a generic AMP framework   Ohad Ben-Cohen
• [PATCH 0/7] Repost of omap SRAM map_io changes   Tony Lindgren
• [PATCH 0/8 v3] ARM: DMA-mapping framework redesign   Marek Szyprowski
• [PATCH 0/8] ARM: at91: make dma/ecc/pit/smc/rtt register base soc independant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/8] S3C2416: Enable armdiv and armclk   Kukjin Kim
• [PATCH 0/8] S3C2416: Enable armdiv and armclk   Heiko Stübner
• [PATCH 0/8] S3C2416: Enable armdiv and armclk   Kukjin Kim
• [PATCH 00/11] Generic ARM fixes for randconfig   Arnd Bergmann
• [PATCH 00/11] Generic ARM fixes for randconfig   Russell King - ARM Linux
• [PATCH 00/11] Generic ARM fixes for randconfig   Arnd Bergmann
• [PATCH 00/11] Generic ARM fixes for randconfig   Russell King - ARM Linux
• [PATCH 00/16] ARM: amba: Enable module alias autogeneration for AMBA drivers   Russell King - ARM Linux
• [PATCH 00/16] ARM: amba: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 00/16] ARM: amba: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 00/16] ARM: amba: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support   Kevin Hilman
• [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support   Kevin Hilman
• [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support   Kevin Hilman
• [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support   Kevin Hilman
• [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support   Kevin Hilman
• [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support   Santosh Shilimkar
• [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support   Santosh Shilimkar
• [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support   Santosh Shilimkar
• [PATCH 00/26] ARM: pxa specific randconfig fixes   Arnd Bergmann
• [PATCH 00/30] ARM/omap: omap specific randconfig fixes   Arnd Bergmann
• [PATCH 00/30] ARM/omap: omap specific randconfig fixes   Santosh Shilimkar
• [PATCH 00/30] ARM/omap: omap specific randconfig fixes   Arnd Bergmann
• [PATCH 00/30] ARM/omap: omap specific randconfig fixes   Santosh Shilimkar
• [PATCH 00/30] ARM/omap: omap specific randconfig fixes   Tony Lindgren
• [PATCH 00/51] Remove inline arch_reset definitions from system.h   Will Deacon
• [PATCH 00/51] Remove inline arch_reset definitions from system.h   Deepak Saxena
• [PATCH 00/51] Remove inline arch_reset definitions from system.h   Deepak Saxena
• [PATCH 01/11] ARM: at91/gpio: make gpio register base soc independant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/11] ARM: export rtc_lock for nvram driver   Arnd Bergmann
• [PATCH 01/11] ARM: export rtc_lock for nvram driver   Russell King - ARM Linux
• [PATCH 01/12] ARM: clean up idle handlers   Nicolas Pitre
• [PATCH 01/12] ARM: clean up idle handlers   Tony Lindgren
• [PATCH 01/12] ARM: clean up idle handlers   Russell King - ARM Linux
• [PATCH 01/12] ARM: clean up idle handlers   Russell King - ARM Linux
• [PATCH 01/13] hwspinlock: OMAP4: Add spinlock support in DT   Ohad Ben-Cohen
• [PATCH 01/14] ARM: tegra: add __force to IO_ADDRESS   Olof Johansson
• [PATCH 01/16] ARM: amba: Move definition of struct amba_id to mod_devicetable.h   Dave Martin
• [PATCH 01/26] usb/gadget/pxa25x: is_vbus_present is gone   Arnd Bergmann
• [PATCH 01/26] usb/gadget/pxa25x: is_vbus_present is gone   Felipe Balbi
• [PATCH 01/26] usb/gadget/pxa25x: is_vbus_present is gone   Eric Miao
• [PATCH 01/30] sound/omap: omap_mcpdm_remove cannot be __devexit   Arnd Bergmann
• [PATCH 01/30] sound/omap: omap_mcpdm_remove cannot be __devexit   Mark Brown
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Russell King - ARM Linux
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Will Deacon
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Will Deacon
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Russell King - ARM Linux
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Will Deacon
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Russell King - ARM Linux
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Will Deacon
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Russell King - ARM Linux
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Jamie Iles
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Rabin Vincent
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Russell King - ARM Linux
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Will Deacon
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Russell King - ARM Linux
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Rabin Vincent
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Russell King - ARM Linux
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Russell King - ARM Linux
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Nicolas Pitre
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Will Deacon
• [PATCH 02/11] ARM: at91/boards: use -EINVAL for invalid gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/11] ARM: SMP depends on MMU   Arnd Bergmann
• [PATCH 02/12] ARM: mach-at91: move special idle code to a out-of-line pm_idle hook   Nicolas Pitre
• [PATCH 02/14] ARM : SAMSUNG : Add RS485 support.   Paul Schilling
• [PATCH 02/14] ARM : SAMSUNG : Add RS485 support.   Russell King - ARM Linux
• [PATCH 02/14] ARM : SAMSUNG : Add RS485 support.   Paul Schilling
• [PATCH 02/14] ARM : SAMSUNG : Add RS485 support.   Russell King - ARM Linux
• [PATCH 02/14] ARM: tegra: fuse: use IO_ADDRESS   Olof Johansson
• [PATCH 02/16] ARM: amba: Auto-generate AMBA driver module aliases during modpost   Pawel Moll
• [PATCH 02/16] ARM: amba: Auto-generate AMBA driver module aliases during modpost   Dave Martin
• [PATCH 02/26] sound/pxa-zylonite: use a valid device for dev_err()   Arnd Bergmann
• [PATCH 02/26] sound/pxa-zylonite: use a valid device for dev_err()   Mark Brown
• [PATCH 02/26] sound/pxa-zylonite: use a valid device for dev_err()   Mark Brown
• [PATCH 02/26] sound/pxa-zylonite: use a valid device for dev_err()   Arnd Bergmann
• [PATCH 02/26] sound/pxa-zylonite: use a valid device for dev_err()   Mark Brown
• [PATCH 02/26] sound/pxa-zylonite: use a valid device for dev_err()   Arnd Bergmann
• [PATCH 02/30] video/omap: fix dependencies   Arnd Bergmann
• [PATCH 02/30] video/omap: fix dependencies   Tomi Valkeinen
• [PATCH 02/30] video/omap: fix dependencies   Arnd Bergmann
• [PATCH 02/51] ARM: mach-at91: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 03/11] ARM: always use ARM_UNWIND for thumb2 kernels   Arnd Bergmann
• [PATCH 03/11] ARM: at91/soc: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/12] ARM: mach-clps711x: move special idle code to a out-of-line pm_idle hook   Nicolas Pitre
• [PATCH 03/14] ARM: tegra: pinmux: use IO_ADDRESS   Olof Johansson
• [PATCH 03/16] hwrng: nomadik: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 03/26] scsi/mvsas: use proper namespace for IRQ_* symbols   Arnd Bergmann
• [PATCH 03/30] video/omap: fix build dependencies   Arnd Bergmann
• [PATCH 03/30] video/omap: fix build dependencies   Tomi Valkeinen
• [PATCH 03/30] video/omap: fix build dependencies   Arnd Bergmann
• [PATCH 03/49] arm: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 03/51] ARM: bcmring: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 04/11] ARM: allow building alignment.c without PROC_FS   Arnd Bergmann
• [PATCH 04/11] ARM: at91/pata: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/11] ARM: at91/pata: use gpio_is_valid to check the gpio   Sergei Shtylyov
• [PATCH 04/11] ARM: at91/pata: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/11] ARM: at91/pata: use gpio_is_valid to check the gpio   Sergei Shtylyov
• [PATCH 04/11] ARM: at91/pata: use gpio_is_valid to check the gpio   Sergei Shtylyov
• [PATCH 04/12] ARM: mach-ebsa110: move special idle code to a out-of-line pm_idle hook   Nicolas Pitre
• [PATCH 04/14] ARM: tegra: timer: don't cast __iomem pointers   Olof Johansson
• [PATCH 04/16] dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers   Vinod Koul
• [PATCH 04/16] dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 04/26] net/pxa168_eth: add missing include of interrupt.h   Arnd Bergmann
• [PATCH 04/26] net/pxa168_eth: add missing include of interrupt.h   Eric Miao
• [PATCH 04/30] ARM: omap: add missing __devexit_p() annotations   Arnd Bergmann
• [PATCH 04/30] ARM: omap: add missing __devexit_p() annotations   Bjarne Steinsbo
• [PATCH 04/30] ARM: omap: add missing __devexit_p() annotations   Russell King - ARM Linux
• [PATCH 04/30] ARM: omap: add missing __devexit_p() annotations   Santosh Shilimkar
• [PATCH 04/30] ARM: omap: add missing __devexit_p() annotations   Tony Lindgren
• [PATCH 04/30] ARM: omap: add missing __devexit_p() annotations   Tony Lindgren
• [PATCH 04/51] ARM: mach-clps711x: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 05/11] ARM: at91/ide: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/11] ARM: vfp: use -mfloat-abi=soft to build vfp   Arnd Bergmann
• [PATCH 05/11] ARM: vfp: use -mfloat-abi=soft to build vfp   Dave Martin
• [PATCH 05/11] ARM: vfp: use -mfloat-abi=soft to build vfp   Khem Raj
• [PATCH 05/12] ARM: mach-gemini: move special idle code to a out-of-line pm_idle hook   Nicolas Pitre
• [PATCH 05/14] ARM : SAMSUNG : Add GPIO_EXTRA for S3C2416.   Paul Schilling
• [PATCH 05/14] ARM : SAMSUNG : Add GPIO_EXTRA for S3C2416.   Heiko Stübner
• [PATCH 05/14] ARM: tegra: tegra2_clocks: don't cast __iomem pointers   Olof Johansson
• [PATCH 05/16] dmaengine: pl330: Enable module alias autogeneration for AMBA drivers   Jassi Brar
• [PATCH 05/16] dmaengine: pl330: Enable module alias autogeneration for AMBA drivers   Vinod Koul
• [PATCH 05/16] dmaengine: pl330: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 05/26] ARM: pxa: make zylonite_pxa*_init declaration match code   Eric Miao
• [PATCH 05/26] ARM: pxa: make zylonite_pxa*_init declaration match code   Arnd Bergmann
• [PATCH 05/30] ARM: omap: enable building omap2 without omap2420/2430   Santosh Shilimkar
• [PATCH 05/30] ARM: omap: enable building omap2 without omap2420/2430   Tony Lindgren
• [PATCH 05/30] ARM: omap: enable building omap2 without omap2420/2430   Arnd Bergmann
• [PATCH 05/51] ARM: cns3xxx: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 06/11] ARM: at91/mmc: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/11] ARM: pm: let platforms select cpu_suspend support   Arnd Bergmann
• [PATCH 06/12] ARM: mach-h720x: move special idle code to a out-of-line pm_idle hook   Nicolas Pitre
• [PATCH 06/14] ARM : SAMSUNG : S3C2416 Added io mapping for Static memory controller.   Paul Schilling
• [PATCH 06/14] ARM : SAMSUNG : S3C2416 Added io mapping for Static memory controller.   Heiko Stübner
• [PATCH 06/14] ARM : SAMSUNG : S3C2416 Added io mapping for Static memory controller.   Paul Schilling
• [PATCH 06/14] ARM: tegra: tegra2_clocks: 0 -> NULL changes   Olof Johansson
• [PATCH 06/16] gpio: pl061: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 06/16] gpio: pl061: Enable module alias autogeneration for AMBA drivers   Grant Likely
• [PATCH 06/26] ARM: pxa: add missing header inclusions   Arnd Bergmann
• [PATCH 06/26] ARM: pxa: add missing header inclusions   Eric Miao
• [PATCH 06/26] ARM: pxa: add missing header inclusions   Russell King - ARM Linux
• [PATCH 06/26] ARM: pxa: add missing header inclusions   Jamie Iles
• [PATCH 06/26] ARM: pxa: add missing header inclusions   Eric Miao
• [PATCH 06/30] ARM: omap: fix build with CONFIG_I2C_OMAP disabled   Arnd Bergmann
• [PATCH 06/30] ARM: omap: fix build with CONFIG_I2C_OMAP disabled   Santosh Shilimkar
• [PATCH 06/51] ARM: mach-davinci: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 07/11] ARM: at92/nand: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/11] ARM: limit CONFIG_HAVE_IDE to platforms that do   Arnd Bergmann
• [PATCH 07/12] ARM: mach-ixp23xx: properly disable CPU idle call   Nicolas Pitre
• [PATCH 07/14] ARM: tegra: pcie: don't cast __iomem pointers   Olof Johansson
• [PATCH 07/16] input: ambakmi: Enable module alias autogeneration for AMBA drivers   Dmitry Torokhov
• [PATCH 07/16] input: ambakmi: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 07/26] ARM: pxa: mbxfb: disable broken debugfs code   Arnd Bergmann
• [PATCH 07/26] ARM: pxa: mbxfb: disable broken debugfs code   Eric Miao
• [PATCH 07/30] ARM: omap: fix visibility of omap2_mbox_iva_priv   Arnd Bergmann
• [PATCH 07/30] ARM: omap: fix visibility of omap2_mbox_iva_priv   Santosh Shilimkar
• [PATCH 07/51] ARM: mach-dove: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 08/11] ARM: add io{read,write}{16,32}be functions   Arnd Bergmann
• [PATCH 08/11] ARM: at92/udc: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/12] ARM: mach-ixp4xx: properly disable CPU idle call   Nicolas Pitre
• [PATCH 08/12] ARM: mach-ixp4xx: properly disable CPU idle call   Russell King - ARM Linux
• [PATCH 08/14] ARM: tegra: pcie: include board.h   Olof Johansson
• [PATCH 08/16] mmc: mmci: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 08/26] ARM: pxa: move z2 to generic cpu_suspend   Arnd Bergmann
• [PATCH 08/26] ARM: pxa: move z2 to generic cpu_suspend   Eric Miao
• [PATCH 08/26] ARM: pxa: move z2 to generic cpu_suspend   Arnd Bergmann
• [PATCH 08/26] ARM: pxa: move z2 to generic cpu_suspend   Eric Miao
• [PATCH 08/26] ARM: pxa: move z2 to generic cpu_suspend   Arnd Bergmann
• [PATCH 08/26] ARM: pxa: move z2 to generic cpu_suspend   Eric Miao
• [PATCH 08/30] ARM: omap2+: fix building without i2c   Arnd Bergmann
• [PATCH 08/30] ARM: omap2+: fix building without i2c   Paul Walmsley
• [PATCH 08/30] ARM: omap2+: fix building without i2c   Arnd Bergmann
• [PATCH 08/30] ARM: omap2+: fix building without i2c   Tony Lindgren
• [PATCH 08/51] ARM: mach-ebsa110: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 09/11] ARM: at92/ohci: use gpio_is_valid to check the gpio   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/11] ARM: pci: always export pcibios_bus_to_resource   Arnd Bergmann
• [PATCH 09/12] ARM: s3c24xx: move special idle code to a proper out-of-line pm_idle hooks   Nicolas Pitre
• [PATCH 09/14] ARM: tegra: pcie: 0 -> NULL changes   Olof Johansson
• [PATCH 09/16] rtc: pl030: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 09/26] ARM: pxa: export symbols from pxa3xx-ulpi   Arnd Bergmann
• [PATCH 09/26] ARM: pxa: export symbols from pxa3xx-ulpi   Eric Miao
• [PATCH 09/30] ARM: omap2: export functions used by nand driver   Arnd Bergmann
• [PATCH 09/30] ARM: omap2: export functions used by nand driver   Tony Lindgren
• [PATCH 09/51] ARM: mach-ep93xx: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 1.5/4] ARM: OMAP1: Use generic map_io, init_early and init_irq   Tony Lindgren
• [PATCH 1/1] ARM: i.MX28: shift frac value in _CLK_SET_RATE   Matt Burtch
• [PATCH 1/1] ARM: i.MX28: shift frac value in _CLK_SET_RATE   Shawn Guo
• [PATCH 1/1] ARM: Make debug UART optional for S3C devices   Thiago A. Correa
• [PATCH 1/1] ARM: Make debug UART optional for S3C devices   Thiago A. Corrêa
• [PATCH 1/1] arm: omap: removed obsolete IRQF_DISABLED   Michael Opdenacker
• [patch 1/1] iMX: Fix module build   Arnaud Patard (Rtp)
• [patch 1/1] iMX: Fix module build   Shawn Guo
• [patch 1/1] iMX: Fix module build   Sergei Shtylyov
• [PATCH 1/1] pinctrl/sirf: fix sirfsoc_get_group_pins prototype introduce in 7e570f97   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] pinctrl/sirf: fix sirfsoc_get_group_pins prototype introduce in 7e570f97   Stephen Warren
• [PATCH 1/1] pinctrl/sirf: fix sirfsoc_get_group_pins prototype introduce in 7e570f97   Linus Walleij
• [PATCH 1/2 v2] plat-pxa: move PXA GPIO driver to GPIO subsystem   Russell King - ARM Linux
• [PATCH 1/2 v2] plat-pxa: move PXA GPIO driver to GPIO subsystem   Linus Walleij
• [PATCH 1/2] [ARM] mach-types: Re-add apf9328   Gwenhael Goavec-Merou
• [PATCH 1/2] [ARM] mach-types: Re-add apf9328   Wolfram Sang
• [PATCH 1/2] [ARM] mach-types: Re-add apf9328   Russell King - ARM Linux
• [PATCH 1/2] [ARM] mach-types: Re-add apf9328   Uwe Kleine-König
• [PATCH 1/2] [ARM] mach-types: Re-add apf9328   Russell King - ARM Linux
• [PATCH 1/2] [ARM] mach-types: Re-add apf9328   Russell King - ARM Linux
• [PATCH 1/2] [ARM] mach-types: Re-add apf9328   Russell King - ARM Linux
• [PATCH 1/2] [ARM] mach-types: Re-add apf9328   Bedia, Vaibhav
• [PATCH 1/2] [ARM] mach-types: Re-add apf9328   Russell King - ARM Linux
• [PATCH 1/2] [ARM] mach-types: Re-add apf9328   Bedia, Vaibhav
• [PATCH 1/2] ARM: amba: Move definition of struct amba_id to mod_devicetable.h   Dave Martin
• [PATCH 1/2] ARM: at91: define CLOCK_TICK_RATE to bogus value except A91X40   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: CLKDEV: Add Common Macro for clk_lookup   Russell King - ARM Linux
• [PATCH 1/2] ARM: CLKDEV: Add Common Macro for clk_lookup   padma venkat
• [PATCH 1/2] ARM: OMAP2+: clock data: Remove redundant timer clkdev   Benoit Cousson
• [PATCH 1/2] ARM: Samsung: Add Exynos4 device tree enabled board file   Grant Likely
• [PATCH 1/2] ARM: Samsung: Add Exynos4 device tree enabled board file   Kukjin Kim
• [PATCH 1/2] ARM: Samsung: Add Exynos4 device tree enabled board file   Rob Herring
• [PATCH 1/2] ARM: Samsung: Add Exynos4 device tree enabled board file   Thomas Abraham
• [PATCH 1/2] arm: samsung: move timer irq numbers to end of linux irq space   Russell King - ARM Linux
• [PATCH 1/2] arm: samsung: move timer irq numbers to end of linux irq space   Thomas Abraham
• [PATCH 1/2] arm: samsung: move timer irq numbers to end of linux irq space   Thomas Abraham
• [PATCH 1/2] arm: samsung: move timer irq numbers to end of linux irq space   Thomas Abraham
• [PATCH 1/2] ARM: smp: Add an IPI handler callable from C code   Shawn Guo
• [PATCH 1/2] atmel_lcdfb: Adjust HFP calculation so it matches the manual.   Alexander Stein
• [PATCH 1/2] drivers: create a pin control subsystem v9   Shawn Guo
• [PATCH 1/2] drivers: create a pin control subsystem v9   Linus Walleij
• [PATCH 1/2] drivers: create a pin control subsystem v9   Linus Walleij
• [PATCH 1/2] drivers: create a pin control subsystem v9   Shawn Guo
• [PATCH 1/2] drivers: create a pin control subsystem v9   Chanho Park
• [PATCH 1/2] drivers: create a pin control subsystem v9   Grant Likely
• [PATCH 1/2] drivers: create a pin control subsystem v9   Linus Walleij
• [PATCH 1/2] drivers: create a pin control subsystem v9   Linus Walleij
• [PATCH 1/2] drivers: create a pin control subsystem v9   Chanho Park
• [PATCH 1/2] drivers: create a pin control subsystem v9   Linus Walleij
• [PATCH 1/2] gpio/samsung: Explicitly index samsung_gpio_cfgs   Mark Brown
• [PATCH 1/2] iommu/core: stop converting bytes to page order   Ohad Ben-Cohen
• [PATCH 1/2] MMC: add workaround for controllers with broken multiblock reads   Paul Walmsley
• [PATCH 1/2] mmc: mmci: Prepare for SDIO before setting up DMA job   Ulf Hansson
• [PATCH 1/2] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant   Ulf Hansson
• [PATCH 1/2] sam9g45: add trng clock and platform device   Peter Korsgaard
• [PATCH 1/2] sam9g45: add trng clock and platform device   Nicolas Ferre
• [PATCH 1/3 v3.1] ARM: S3C64XX: Update for conversion to SAMSUNG_GPIO_EXTRA   Mark Brown
• [PATCH 1/3 v3] ARM Realview PCIX map include file changes   Colin Tuckley
• [PATCH 1/3 v3] ARM Realview PCIX map include file changes   Russell King - ARM Linux
• [PATCH 1/3 v3] ARM Realview PCIX map include file changes   Colin Tuckley
• [PATCH 1/3 v3] ARM Realview PCIX map include file changes   Arnd Bergmann
• [PATCH 1/3 v3] ARM Realview PCIX map include file changes   Catalin Marinas
• [PATCH 1/3 v3] ARM Realview PCIX map include file changes   Arnd Bergmann
• [PATCH 1/3 v3] ARM: EXYNOS4: Support for generic I/O power domains on EXYNOS4210/4212   Chanwoo Choi
• [PATCH 1/3] Add support for mini-box.com picoSAM9G45 board   Nicu Pavel
• [PATCH 1/3] Add support for mini-box.com picoSAM9G45 board   Nicu Pavel
• [PATCH 1/3] Add support for mini-box.com picoSAM9G45 board   Russell King - ARM Linux
• [PATCH 1/3] ARM 4Kstacks: Add support for 4K kernel stacks to ARM   Tim Bird
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Maxime Ripard
• [PATCH 1/3] ARM: EXYNOS: Add ASV feature for Exynos4 series   Jongpill Lee
• [PATCH 1/3] ARM: EXYNOS: Add ASV feature for Exynos4 series   Sylwester Nawrocki
• [PATCH 1/3] ARM: imx: always select CACHE_L2X0 on i.MX3   Arnd Bergmann
• [PATCH 1/3] ARM: imx: always select CACHE_L2X0 on i.MX3   Shawn Guo
• [PATCH 1/3] ARM: imx: always select CACHE_L2X0 on i.MX3   Barry Song
• [PATCH 1/3] ARM: mmp: add sram allocator   Tony Lindgren
• [PATCH 1/3] ARM: pxa168: Add SDHCI support   Tanmay Upadhyay
• [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space   Changhwan Youn
• [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space   Kukjin Kim
• [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space   Grant Likely
• [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space   Kukjin Kim
• [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space   Rob Herring
• [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space   Thomas Abraham
• [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space   Grant Likely
• [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space   Thomas Abraham
• [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space   Thomas Abraham
• [PATCH 1/3] ARM: tegra: paz00: add support for wakeup gpio key   Marc Dietrich
• [PATCH 1/3] ARM: tegra: paz00: add support for wakeup gpio key   Stephen Warren
• [PATCH 1/3] ARM: tegra: paz00: add support for wakeup gpio key   Marc Dietrich
• [PATCH 1/3] irq: support domains with non-zero hwirq base   Grant Likely
• [PATCH 1/3] mmc: sdhci-s3c: Keep a copy of platform data and use it   Thomas Abraham
• [PATCH 1/3] mmc: sdhci-s3c: Remove usage of clk_type member in platform data   Thomas Abraham
• [PATCH 1/3] mmc: sdhci-s3c: Remove usage of clk_type member in platform data   Kyungmin Park
• [PATCH 1/3] mmc: sdhci-s3c: Remove usage of clk_type member in platform data   Thomas Abraham
• [PATCH 1/3] regulator: twl: adapt twl-regulator driver to dt   Rajendra Nayak
• [PATCH 1/3] regulator: twl: adapt twl-regulator driver to dt   Mark Brown
• [PATCH 1/3] sam9g20ek/9m10g45ek/stam9g20: unbreak build after 'use -EINVAL for invalid gpio'   Peter Korsgaard
• [PATCH 1/3] sam9g20ek/9m10g45ek/stam9g20: unbreak build after 'use -EINVAL for invalid gpio'   Nicolas Ferre
• [PATCH 1/3] sam9g20ek/9m10g45ek/stam9g20: unbreak build after 'use -EINVAL for invalid gpio'   Peter Korsgaard
• [PATCH 1/3] SDHCI: S3C: Use generic clock names for sdhci bus clock options   Rajeshwari Shinde
• [PATCH 1/3] spi/pl022: fix build warnings   Linus Walleij
• [PATCH 1/3] spi/pl022: fix build warnings   Viresh Kumar
• [PATCH 1/3] tty/serial: atmel_serial: change platform_data variable name   Nicolas Ferre
• [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY   Nicolas Pitre
• [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY   Tony Lindgren
• [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY   Santosh Shilimkar
• [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY   Tony Lindgren
• [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY   Santosh Shilimkar
• [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY   Tony Lindgren
• [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY   Santosh Shilimkar
• [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY   Tony Lindgren
• [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY   Santosh Shilimkar
• [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY   Tony Lindgren
• [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY   Tony Lindgren
• [PATCH 1/4] ARM: at91: add at91sam9g20 dtsi   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] ARM: at91: rename at91sam9260ek_defconfig to at91sam9260_defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/4] ARM: EXYNOS4: Support for generic I/O power domains on EXYNOS4210   Sylwester Nawrocki
• [PATCH 1/4] ARM: EXYNOS4: Support for generic I/O power domains on EXYNOS4210   Chanwoo Choi
• [PATCH 1/4] ARM: OMAP3 PM: Fix IO Daisychain sequence   Vishwanath BS
• [PATCH 1/4] ARM: OMAP3 PM: Fix IO Daisychain sequence   Tony Lindgren
• [PATCH 1/4] ARM: OMAP3 PM: Fix IO Daisychain sequence   Kevin Hilman
• [PATCH 1/4] ARM: OMAP3 PM: Fix IO Daisychain sequence   Vishwanath Sripathy
• [PATCH 1/4] ARM: OMAP3 PM: Fix IO Daisychain sequence   Paul Walmsley
• [PATCH 1/4] ARM: OMAP3 PM: Fix IO Daisychain sequence   Vishwanath Sripathy
• [PATCH 1/4] ARM: OMAP3: cm-t35: add regulator supply for ads7846   Igor Grinberg
• [PATCH 1/4] dmaengine: at_hdmac: platform data move to use .id_table   Vinod Koul
• [PATCH 1/4] dmaengine: at_hdmac: platform data move to use .id_table   Nicolas Ferre
• [PATCH 1/4] dmaengine: at_hdmac: platform data move to use .id_table   Nicolas Ferre
• [PATCH 1/4] dmaengine: at_hdmac: platform data move to use .id_table   Nicolas Ferre
• [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets   Russell King - ARM Linux
• [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets   Stefan Nilsson XK
• [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets   Ulf Hansson
• [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets   Ulf Hansson
• [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets   Russell King - ARM Linux
• [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets   Russell King - ARM Linux
• [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets   Linus Walleij
• [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets   Ulf Hansson
• [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets   Russell King - ARM Linux
• [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets   Stefan Nilsson XK
• [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets   Ulf Hansson
• [PATCH 1/5 v4] ARM Realview PCIX map include file changes   Colin Tuckley
• [PATCH 1/5 v4] ARM Realview PCIX map include file changes   Russell King - ARM Linux
• [PATCH 1/5 v4] ARM Realview PCIX map include file changes   Colin Tuckley
• [PATCH 1/5 v4] ARM Realview PCIX map include file changes   Russell King - ARM Linux
• [PATCH 1/5 v4] ARM Realview PCIX map include file changes   Colin Tuckley
• [PATCH 1/5] arm/imx: remove mx31_setup_weimcs() from mx31.h   Shawn Guo
• [PATCH 1/5] ARM: Samsung: PWM: Allow to differentiate SoCs based on platform device name.   Kukjin Kim
• [PATCH 1/5] drivercore: add new error value for deferred probe   Greg KH
• [PATCH 1/5] drivercore: add new error value for deferred probe   Mark Brown
• [PATCH 1/5] drivercore: add new error value for deferred probe   Grant Likely
• [PATCH 1/5] drivercore: add new error value for deferred probe   Valdis.Kletnieks at vt.edu
• [PATCH 1/5] drivercore: add new error value for deferred probe   Greg KH
• [PATCH 1/5] drivercore: add new error value for deferred probe   Grant Likely
• [PATCH 1/5] drivercore: add new error value for deferred probe   Greg KH
• [PATCH 1/5] drivercore: add new error value for deferred probe   G, Manjunath Kondaiah
• [PATCH 1/5] drivercore: add new error value for deferred probe   Grant Likely
• [PATCH 1/5] S3C2443/S3C2416: Add adc registers   Heiko Stübner
• [PATCH 1/6] arm/tegra: initial device tree for tegra30   pdeschrijver at nvidia.com
• [PATCH 1/6] arm/tegra: initial device tree for tegra30   Stephen Warren
• [PATCH 1/6] ASoC: codecs/wm8682: use __devexit_p   Arnd Bergmann
• [PATCH 1/6] ASoC: codecs/wm8682: use __devexit_p   Mark Brown
• [PATCH 1/6] mach-ux500: pass parent pointer to each platform device   Lee Jones
• [PATCH 1/7] amp/remoteproc: add framework for controlling remote processors   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] amp/remoteproc: add framework for controlling remote processors   Ohad Ben-Cohen
• [PATCH 1/7] amp/remoteproc: add framework for controlling remote processors   Ohad Ben-Cohen
• [PATCH 1/7] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY   Tony Lindgren
• [PATCH 1/7] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY   Andres Salomon
• [PATCH 1/7] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY   Tony Lindgren
• [PATCH 1/7] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY   Tony Lindgren
• [PATCH 1/8] ARM: at91/nand: make ecc register base soc independant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/8] ARM: dma-mapping: remove offset parameter to prepare for generic dma_ops   Marek Szyprowski
• [PATCH 1/9] ARM: vic: Don't write to the read-only register VIC_IRQ_STATUS   Zoltan Devai
• [PATCH 1/9] ARM: vic: Don't write to the read-only register VIC_IRQ_STATUS   Linus Walleij
• [PATCH 1/9] ARM: vic: Don't write to the read-only register VIC_IRQ_STATUS   Zoltan Devai
• [PATCH 1/9] mm: move some functions from memory_hotplug.c to page_isolation.c   Marek Szyprowski
• [PATCH 1/9] mm: move some functions from memory_hotplug.c to page_isolation.c   Andrew Morton
• [PATCH 1/9] mm: move some functions from memory_hotplug.c to page_isolation.c   Mel Gorman
• [PATCH 1/9] OMAP2xxx: HWMOD: Fix DSS reset   Paul Walmsley
• [PATCH 10/11] ARM: at91/gpio: drop PIN_BASE   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/11] ARM: OC_ETM should not select ARM_AMBA   Arnd Bergmann
• [PATCH 10/12] ARM: mach-shark: properly disable CPU idle call   Nicolas Pitre
• [PATCH 10/14] ARM: tegra: tegra_init_cache should be static   Olof Johansson
• [PATCH 10/16] rtc: pl031: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 10/26] ARM: pxa: allow selecting just one of TREO680/CENTRO   Arnd Bergmann
• [PATCH 10/26] ARM: pxa: allow selecting just one of TREO680/CENTRO   Eric Miao
• [PATCH 10/30] ARM: omap/iommu: always provide iommu debug code   Arnd Bergmann
• [PATCH 10/30] ARM: omap/iommu: always provide iommu debug code   Ohad Ben-Cohen
• [PATCH 10/30] ARM: omap/iommu: always provide iommu debug code   Arnd Bergmann
• [PATCH 10/30] ARM: omap/iommu: always provide iommu debug code   Ohad Ben-Cohen
• [PATCH 10/30] ARM: omap/iommu: always provide iommu debug code   Tony Lindgren
• [PATCH 10/51] ARM: mach-footbridge: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 11/11] ARM: at91/gpio: fix display of number of irq setuped   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/11] ARM: common/vic: use proper __iomem annotations   Arnd Bergmann
• [PATCH 11/11] ARM: common/vic: use proper __iomem annotations   H Hartley Sweeten
• [PATCH 11/12] ARM: mach-w90x900: properly disable CPU idle call   Nicolas Pitre
• [PATCH 11/14] ARM: tegra: tegra_rtc_read_ms should be static   Olof Johansson
• [PATCH 11/16] spi: pl022: Enable module alias autogeneration for AMBA drivers   Grant Likely
• [PATCH 11/16] spi: pl022: Enable module alias autogeneration for AMBA drivers   Linus Walleij
• [PATCH 11/16] spi: pl022: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 11/21] ARM: drop unused Kconfig symbols   Paul Bolle
• [PATCH 11/21] ARM: drop unused Kconfig symbols   Nicolas Ferre
• [PATCH 11/26] ARM: pxa: allow building palm27x without pxafb   Arnd Bergmann
• [PATCH 11/26] ARM: pxa: allow building palm27x without pxafb   Eric Miao
• [PATCH 11/26] ARM: pxa: allow building palm27x without pxafb   Arnd Bergmann
• [PATCH 11/30] ARM: omap2/n8x0: work around modular omap mmc   Arnd Bergmann
• [PATCH 11/30] ARM: omap2/n8x0: work around modular omap mmc   Russell King - ARM Linux
• [PATCH 11/30] ARM: omap2/n8x0: work around modular omap mmc   Arnd Bergmann
• [PATCH 11/30] ARM: omap2/n8x0: work around modular omap mmc   Tony Lindgren
• [PATCH 11/51] ARM: mach-gemini: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 12/11] ARM: include linux/highmem.h in uaccess functions   Arnd Bergmann
• [PATCH 12/12] ARM: imx: move special idle code to proper out-of-line pm_idle hooks   Sascha Hauer
• [PATCH 12/12] ARM: imx: move special idle code to proper out-of-line pm_idle hooks   Nicolas Pitre
• [PATCH 12/14] ARM: tegra: tegra_powergate_is_powered should be static   Olof Johansson
• [PATCH 12/16] serial: pl010: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 12/26] ARM: pxa: pxa95x/saarb depends on pxa3xx code   Arnd Bergmann
• [PATCH 12/26] ARM: pxa: pxa95x/saarb depends on pxa3xx code   Eric Miao
• [PATCH 12/26] ARM: pxa: pxa95x/saarb depends on pxa3xx code   Arnd Bergmann
• [PATCH 12/30] ARM: omap4: always build omap_phy_internal   Arnd Bergmann
• [PATCH 12/30] ARM: omap4: always build omap_phy_internal   Tony Lindgren
• [PATCH 12/51] ARM: mach-h720x: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 13/14] ARM: tegra: tegra2_clocks: don't export some tables   Olof Johansson
• [PATCH 13/16] serial: pl011: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 13/26] ARM: pxa: use correct __iomem annotations   Arnd Bergmann
• [PATCH 13/26] ARM: pxa: use correct __iomem annotations   Eric Miao
• [PATCH 13/26] ARM: pxa: use correct __iomem annotations   Russell King - ARM Linux
• [PATCH 13/26] ARM: pxa: use correct __iomem annotations   Arnd Bergmann
• [PATCH 13/26] ARM: pxa: use correct __iomem annotations   Eric Miao
• [PATCH 13/30] ARM: omap2+: fix omap_hdq_init compilation   Arnd Bergmann
• [PATCH 13/30] ARM: omap2+: fix omap_hdq_init compilation   Santosh Shilimkar
• [PATCH 13/30] ARM: omap2+: fix omap_hdq_init compilation   Tony Lindgren
• [PATCH 13/51] ARM: mach-integrator: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 14/14] ARM: tegra: dma: staticify some tables and functions   Olof Johansson
• [PATCH 14/16] fbdev: amba: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 14/26] mtd: nand_h1900 never worked   Arnd Bergmann
• [PATCH 14/26] mtd: nand_h1900 never worked   Eric Miao
• [PATCH 14/26] mtd: nand_h1900 never worked   Artem Bityutskiy
• [PATCH 14/30] ARM: omap2: irq.c is always needed   Arnd Bergmann
• [PATCH 14/30] ARM: omap2: irq.c is always needed   Santosh Shilimkar
• [PATCH 14/51] ARM: mach-iop13xx: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 15/16] watchdog: sp805: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 15/26] irda/ficp: only works on some pxa models   Arnd Bergmann
• [PATCH 15/26] irda/ficp: only works on some pxa models   Eric Miao
• [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method   Russell King - ARM Linux
• [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method   Arnd Bergmann
• [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method   Felipe Balbi
• [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method   Arnd Bergmann
• [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method   Felipe Balbi
• [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method   Arnd Bergmann
• [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method   Felipe Balbi
• [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method   Felipe Balbi
• [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method   Arnd Bergmann
• [PATCH 15/51] ARM: mach-iop32x: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 16/16] sound: aaci: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 16/26] ARM: pxa: CPU_PJ4 requires IWMMXT   Arnd Bergmann
• [PATCH 16/26] ARM: pxa: CPU_PJ4 requires IWMMXT   Russell King - ARM Linux
• [PATCH 16/26] ARM: pxa: CPU_PJ4 requires IWMMXT   Arnd Bergmann
• [PATCH 16/26] ARM: pxa: CPU_PJ4 requires IWMMXT   Eric Miao
• [PATCH 16/26] ARM: pxa: CPU_PJ4 requires IWMMXT   Arnd Bergmann
• [PATCH 16/30] usb/musb: HDRC depends on TWL4030_CORE for OMAP3/4   Arnd Bergmann
• [PATCH 16/30] usb/musb: HDRC depends on TWL4030_CORE for OMAP3/4   Felipe Balbi
• [PATCH 16/51] ARM: mach-iop33x: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa   Arnd Bergmann
• [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa   Haojian Zhuang
• [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa   Eric Miao
• [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa   Haojian Zhuang
• [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa   Arnd Bergmann
• [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa   Haojian Zhuang
• [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa   Eric Miao
• [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa   Haojian Zhuang
• [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa   Eric Miao
• [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa   Arnd Bergmann
• [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa   Arnd Bergmann
• [PATCH 17/30] usb/musb: allow building USB_MUSB_TUSB6010 as a module   Tony Lindgren
• [PATCH 17/30] usb/musb: allow building USB_MUSB_TUSB6010 as a module   Felipe Balbi
• [PATCH 17/30] usb/musb: allow building USB_MUSB_TUSB6010 as a module   Arnd Bergmann
• [PATCH 17/51] ARM: OMAP: convert reset to use arm_arch_reset   Will Deacon
• [PATCH 18/26] ARM: pxa: MTD_XIP is not actually working any more   Arnd Bergmann
• [PATCH 18/26] ARM: pxa: MTD_XIP is not actually working any more   Eric Miao
• [PATCH 18/26] ARM: pxa: MTD_XIP is not actually working any more   Nicolas Pitre
• [PATCH 18/30] omap-usb: automatically select MFD_OMAP_USB_HOST   Arnd Bergmann
• [PATCH 18/30] omap-usb: automatically select MFD_OMAP_USB_HOST   Samuel Ortiz
• [PATCH 18/51] ARM: mach-ixp2000: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 19/26] ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ   Arnd Bergmann
• [PATCH 19/26] ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ   Eric Miao
• [PATCH 19/30] tty/serial/omap: console can only be built-in   Arnd Bergmann
• [PATCH 19/30] tty/serial/omap: console can only be built-in   Govindraj
• [PATCH 19/51] ARM: mach-ixp23xx: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 2/2 v2] plat-pxa: break out GPIO driver specifics   Russell King - ARM Linux
• [PATCH 2/2] [ARM] MX1:apf9328: Add i2c support   Gwenhael Goavec-Merou
• [PATCH 2/2] [ARM] MX1:apf9328: Add i2c support   Wolfram Sang
• [PATCH 2/2] [ARM] MX1:apf9328: Add i2c support   gwenhael.goavec
• [PATCH 2/2] [ARM] MX1:apf9328: Add i2c support   gwenhael.goavec
• [PATCH 2/2] [ARM] MX1:apf9328: Add i2c support   Russell King - ARM Linux
• [PATCH 2/2] [ARM] MX1:apf9328: Add i2c support   Sascha Hauer
• [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage   Julien Boibessot
• [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage   Russell King - ARM Linux
• [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage   Shawn Guo
• [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage   Shawn Guo
• [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage   Grant Likely
• [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage   Sascha Hauer
• [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage   Shawn Guo
• [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage   Sascha Hauer
• [PATCH 2/2] ARM: amba: Auto-generate AMBA driver module aliases during modpost   Dave Martin
• [PATCH 2/2] ARM: at91: drop specific Kconfig for at91sam9g20/g10   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen board   Thomas Abraham
• [PATCH 2/2] ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen board   Grant Likely
• [PATCH 2/2] ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen board   Kukjin Kim
• [PATCH 2/2] arm: exynos4: add support for dt irq specifier to linux virq conversion   Thomas Abraham
• [PATCH 2/2] ARM: OMAP2+: timer: Remove omap_device_pm_latency   Benoit Cousson
• [PATCH 2/2] ARM: SAMSUNG: Cleanup resources by using macro   Kukjin Kim
• [PATCH 2/2] ARM: SAMSUNG: Cleanup resources by using macro   Russell King - ARM Linux
• [PATCH 2/2] ARM: SAMSUNG: Cleanup resources by using macro   Kukjin Kim
• [PATCH 2/2] ARM: smp: Add a localtimer handler callable from C code   Shawn Guo
• [PATCH 2/2] ARM: Switch to using CLKDEV_INIT macro for creating clk_lookup instance   Russell King - ARM Linux
• [PATCH 2/2] ARM: ux500: Support SD cards on HREFv60 boards   Stefan Nilsson XK
• [PATCH 2/2] atmel_lcdfb: Use proper blanking on negative contrast polarity   Alexander Stein
• [PATCH 2/2] gpio/samsung: Fix typo in comment   Mark Brown
• [PATCH 2/2] hw_random: add driver for atmel true hardware random number generator   Mark Brown
• [PATCH 2/2] hw_random: add driver for atmel true hardware random number generator   Peter Korsgaard
• [PATCH 2/2] hw_random: add driver for atmel true hardware random number generator   Peter Korsgaard
• [PATCH 2/2] hw_random: add driver for atmel true hardware random number generator   Jamie Iles
• [PATCH 2/2] hw_random: add driver for atmel true hardware random number generator   Peter Korsgaard
• [PATCH 2/2] iommu/core: split mapping to page sizes as   Ohad Ben-Cohen
• [PATCH 2/2] mmc: mmci: add constraints on alignment for SDIO   Ulf Hansson
• [PATCH 2/2] mmc: mmci: Fix incorrect handling of HW flow control for SDIO   Ulf Hansson
• [PATCH 2/2] MMC: omap_hsmmc: disable multiblock reads when platform_data indicates that they are broken   Paul Walmsley
• [PATCH 2/2] pinmux: add a driver for the U300 pinmux   Linus Walleij
• [PATCH 2/2] pinmux: add a driver for the U300 pinmux   Barry Song
• [PATCH 2/2] pinmux: add a driver for the U300 pinmux   Barry Song
• [PATCH 2/2] pinmux: add a driver for the U300 pinmux   Linus Walleij
• [PATCH 2/2] pinmux: add a driver for the U300 pinmux   Linus Walleij
• [PATCH 2/2] pinmux: add a driver for the U300 pinmux   Barry Song
• [PATCH 2/3 v3.1] ARM: SAMSUNG: Fix GPIO space reservation for S3C64xx platforms   Mark Brown
• [PATCH 2/3 v3] ARM: EXYNOS4: Use generic power domain on EXYNOS4210/4212   Chanwoo Choi
• [PATCH 2/3] Add kernel configuration option for picosam9g45 board   Nicu Pavel
• [PATCH 2/3] Add kernel configuration option for picosam9g45 board   Nicu Pavel
• [PATCH 2/3] ARM: Add static kernel function stack size analyzer, for ARM   Tim Bird
• [PATCH 2/3] ARM: Add static kernel function stack size analyzer, for ARM   Arnd Bergmann
• [PATCH 2/3] ARM: Add static kernel function stack size analyzer, for ARM   Andi Kleen
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Jonathan Cameron
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Thomas Petazzoni
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Lars-Peter Clausen
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Jonathan Cameron
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Thomas Petazzoni
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Jonathan Cameron
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Mark Brown
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Lars-Peter Clausen
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions   Thomas Abraham
• [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions   Rob Herring
• [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions   Thomas Abraham
• [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions   Thomas Abraham
• [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions   Grant Likely
• [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions   Nicolas Pitre
• [PATCH 2/3] arm: exynos4: use 'exynos4-sdhci' as device name for sdhci controllers   Thomas Abraham
• [PATCH 2/3] ARM: EXYNOS: Add clock for Exynos4210 asv feature   Jongpill Lee
• [PATCH 2/3] ARM: gic: add irq_domain support   Grant Likely
• [PATCH 2/3] ARM: imx: add missing include of linux/ftrace.h   Arnd Bergmann
• [PATCH 2/3] ARM: imx: add missing include of linux/ftrace.h   Jamie Iles
• [PATCH 2/3] ARM: plat-samsung: use Kconfig choice for debug UART selection   Thomas Abraham
• [PATCH 2/3] ARM: plat-samsung: use Kconfig choice for debug UART selection   Will Deacon
• [PATCH 2/3] ARM: plat-samsung: use Kconfig choice for debug UART selection   Thomas Abraham
• [PATCH 2/3] ARM: plat-samsung: use Kconfig choice for debug UART selection   Will Deacon
• [PATCH 2/3] ARM: plat-samsung: use Kconfig choice for debug UART selection   Thomas Abraham
• [PATCH 2/3] ARM: SAMSUNG: Remove SDHCI bus clocks from platform data   Rajeshwari Shinde
• [PATCH 2/3] define ARM-specific dma_coherent_write_sync   Jon Masters
• [PATCH 2/3] define ARM-specific dma_coherent_write_sync   Catalin Marinas
• [PATCH 2/3] define ARM-specific dma_coherent_write_sync   Jon Masters
• [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities   Stephen Warren
• [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities   Stephen Warren
• [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities   Thomas Abraham
• [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities   Rob Herring
• [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities   Thomas Abraham
• [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities   Thomas Abraham
• [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities   Thomas Abraham
• [PATCH 2/3] mmc: sdhci-pxa: Add SDHCI driver for PXA16x   Tanmay Upadhyay
• [PATCH 2/3] omap4: sdp: Pass regulator data from dt   Rajendra Nayak
• [PATCH 2/3] omap4: sdp: Pass regulator data from dt   Mark Brown
• [PATCH 2/3] spi/pl022: disable the PL022 block when unused   Linus Walleij
• [PATCH 2/3] spi/pl022: disable the PL022 block when unused   Viresh Kumar
• [PATCH 2/3] spi/pl022: disable the PL022 block when unused   Russell King - ARM Linux
• [PATCH 2/3] staging: nvec: add device tree support   Marc Dietrich
• [PATCH 2/3] staging: nvec: add device tree support   Stephen Warren
• [PATCH 2/3] staging: nvec: add device tree support   Marc Dietrich
• [PATCH 2/3] tty/serial: atmel_serial: whitespace and braces modifications   Nicolas Ferre
• [PATCH 2/4] ARM: at91: add Calao USB A9G20 DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] ARM: at91: rename at91sam9g20ek_defconfig to at91sam9g20_defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/4] ARM: EXYNOS4: Support for generic Clock manipulation PM callbacks   Kukjin Kim
• [PATCH 2/4] ARM: EXYNOS4: Support for generic Clock manipulation PM callbacks   Chanwoo Choi
• [PATCH 2/4] ARM: OMAP3: cm-t35: fix DSS regulator supply   Igor Grinberg
• [PATCH 2/4] ARM: OMAP4 PM: Add IO Daisychain support   Vishwanath BS
• [PATCH 2/4] ARM: OMAP4 PM: Add IO Daisychain support   Paul Walmsley
• [PATCH 2/4] ARM: OMAP4 PM: Add IO Daisychain support   Vishwanath Sripathy
• [PATCH 2/4] ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done   Santosh Shilimkar
• [PATCH 2/4] ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done   Tony Lindgren
• [PATCH 2/4] dmaengine: at_hdmac: add device tree support   Nicolas Ferre
• [PATCH 2/5 v4] ARM Realview PCIX IRQ include file changes   Colin Tuckley
• [PATCH 2/5] arm/imx: explicitly includes mach/hardware.h in mach-kzm_arm11_01.c   Shawn Guo
• [PATCH 2/5] ARM: s3c64xx: Add generic high resolution time support using PWM timers.   Tomasz Figa
• [PATCH 2/5] ARM: s3c64xx: Add generic high resolution time support using PWM timers.   Russell King - ARM Linux
• [PATCH 2/5] ARM: s3c64xx: Add generic high resolution time support using PWM timers.   Kukjin Kim
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Greg KH
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Josh Triplett
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Greg KH
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Grant Likely
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Josh Triplett
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Greg KH
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Josh Triplett
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Andrei Warkentin
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Ming Lei
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   G, Manjunath Kondaiah
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Grant Likely
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Ming Lei
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Alan Stern
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Ming Lei
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Alan Stern
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Grant Likely
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Alan Stern
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Grant Likely
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Ming Lei
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Alan Stern
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Alan Stern
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Grant Likely
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Alan Stern
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Grant Likely
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Alan Stern
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Grant Likely
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Alan Stern
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   David Daney
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Grant Likely
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   Grant Likely
• [PATCH 2/5] drivercore: Add driver probe deferral mechanism   David Daney
• [PATCH 2/5] s3c-adc: Fix mux bit modification in s3c_adc_select   Heiko Stübner
• [PATCH 2/6] arm/tegra: prepare pinmux code for multiple tegra variants   Stephen Warren
• [PATCH 2/6] arm/tegra: prepare pinmux code for multiple tegra variants   Peter De Schrijver
• [PATCH 2/6] arm/tegra: prepare pinmux code for multiple tegra variants   Olof Johansson
• [PATCH 2/6] arm/tegra: prepare pinmux code for multiple tegra variants   Stephen Warren
• [PATCH 2/6] arm/tegra: prepare pinmux code for multiple tegra variants   Peter De Schrijver
• [PATCH 2/6] arm/tegra: prepare pinmux code for multiple tegra variants   pdeschrijver at nvidia.com
• [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB   Arnd Bergmann
• [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB   Mark Brown
• [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB   Arnd Bergmann
• [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB   Mark Brown
• [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB   Arnd Bergmann
• [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB   Russell King - ARM Linux
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Lee Jones
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Jamie Iles
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Greg KH
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Greg KH
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Arnd Bergmann
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Greg KH
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Lee Jones
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Lee Jones
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Arnd Bergmann
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Arnd Bergmann
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Arnd Bergmann
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Jamie Iles
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Greg KH
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Greg KH
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Greg KH
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Greg KH
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Arnd Bergmann
• [PATCH 2/6] drivers/base: add bus for System-on-Chip devices   Jamie Iles
• [PATCH 2/7] amp/remoteproc: add debugfs entries   Ohad Ben-Cohen
• [PATCH 2/7] ARM: OMAP1: Use generic map_io, init_early and init_irq   Tony Lindgren
• [PATCH 2/7] s3c-adc: describe features via quirk constants   Kukjin Kim
• [PATCH 2/7] s3c-adc: describe features via quirk constants   Heiko Stübner
• [PATCH 2/7] s3c-adc: describe features via quirk constants   Kukjin Kim
• [PATCH 2/7] s3c-adc: describe features via quirk constants   Kukjin Kim
• [PATCH 2/7] s3c-adc: describe features via quirk constants   Heiko Stübner
• [PATCH 2/7] s3c-adc: describe features via quirk constants   Kukjin Kim
• [PATCH 2/8] ARM: at91/dma: make dma register base soc independant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/8] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Marek Szyprowski
• [PATCH 2/9] ARM: SPMP8000: Add machine base files   Zoltan Devai
• [PATCH 2/9] ARM: SPMP8000: Add machine base files   Jamie Iles
• [PATCH 2/9] ARM: SPMP8000: Add machine base files   Zoltan Devai
• [PATCH 2/9] ARM: SPMP8000: Add machine base files   Jamie Iles
• [PATCH 2/9] ARM: SPMP8000: Add machine base files   Arnd Bergmann
• [PATCH 2/9] ARM: SPMP8000: Add machine base files   Zoltan Devai
• [PATCH 2/9] ARM: SPMP8000: Add machine base files   Russell King - ARM Linux
• [PATCH 2/9] ARM: SPMP8000: Add machine base files   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/9] ARM: SPMP8000: Add machine base files   Arnd Bergmann
• [PATCH 2/9] ARM: SPMP8000: Add machine base files   Arnd Bergmann
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Marek Szyprowski
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Andrew Morton
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Michal Nazarewicz
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Andrew Morton
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Michal Nazarewicz
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Marek Szyprowski
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Andrew Morton
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Mel Gorman
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Michal Nazarewicz
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Dave Hansen
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Michal Nazarewicz
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Mel Gorman
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Michal Nazarewicz
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Michal Nazarewicz
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Nayak, Rajendra
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Russell King - ARM Linux
• [PATCH 2/9] regulator: helper routine to extract regulator_init_data   Grant Likely
• [PATCH 20/26] ARM: pxa: select FB_PXA on saar and tevorevb   Arnd Bergmann
• [PATCH 20/26] ARM: pxa: select FB_PXA on saar and tevorevb   Eric Miao
• [PATCH 20/26] ARM: pxa: select FB_PXA on saar and tevorevb   Arnd Bergmann
• [PATCH 20/30] media/omap_vout: disable driver for now   Arnd Bergmann
• [PATCH 20/30] media/omap_vout: disable driver for now   Archit Taneja
• [PATCH 20/30] media/omap_vout: disable driver for now   Arnd Bergmann
• [PATCH 20/51] ARM: mach-ixp4xx: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 21/26] ARM: pxa: select POWER_SUPPLY on raumfeld   Arnd Bergmann
• [PATCH 21/26] ARM: pxa: select POWER_SUPPLY on raumfeld   Eric Miao
• [PATCH 21/30] sound/soc/omap: limit to omap2plus   Arnd Bergmann
• [PATCH 21/30] sound/soc/omap: limit to omap2plus   Jarkko Nikula
• [PATCH 21/30] sound/soc/omap: limit to omap2plus   Arnd Bergmann
• [PATCH 21/30] sound/soc/omap: limit to omap2plus   Jarkko Nikula
• [PATCH 21/30] sound/soc/omap: limit to omap2plus   Arnd Bergmann
• [PATCH 21/30] sound/soc/omap: limit to omap2plus   Mark Brown
• [PATCH 21/51] ARM: mach-kirkwood: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 22/26] ARM: pxa: only select SMC91x on xcep when networking is enabled   Eric Miao
• [PATCH 22/26] ARM: pxa: only select SMC91x on xcep when networking is enabled   Arnd Bergmann
• [PATCH 22/30] mfd: build twl6030 only on omap2   Arnd Bergmann
• [PATCH 22/30] mfd: build twl6030 only on omap2   Samuel Ortiz
• [PATCH 22/30] mfd: build twl6030 only on omap2   Arnd Bergmann
• [PATCH 22/51] ARM: mach-ks8695: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 23/26] ARM: pxa: viper: select I2C_GPIO only when I2C is on   Arnd Bergmann
• [PATCH 23/30] ARM: omap2: select twl4030 support on boards that need it   Tony Lindgren
• [PATCH 23/30] ARM: omap2: select twl4030 support on boards that need it   Santosh Shilimkar
• [PATCH 23/30] ARM: omap2: select twl4030 support on boards that need it   Arnd Bergmann
• [PATCH 23/30] ARM: omap2: select twl4030 support on boards that need it   Arnd Bergmann
• [PATCH 23/51] ARM: mach-lpc32xx: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 24/26] ARM: pxa: centro and treo680 need palm27x   Arnd Bergmann
• [PATCH 24/26] ARM: pxa: centro and treo680 need palm27x   Eric Miao
• [PATCH 24/26] ARM: pxa: centro and treo680 need palm27x   Marek Vasut
• [PATCH 24/30] ARM: omap2+: ensure that one of omap2/3/4 is selected   Santosh Shilimkar
• [PATCH 24/30] ARM: omap2+: ensure that one of omap2/3/4 is selected   Tony Lindgren
• [PATCH 24/30] ARM: omap2+: ensure that one of omap2/3/4 is selected   Arnd Bergmann
• [PATCH 24/49] SCSI: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 24/51] ARM: mach-mmp: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 25/26] ARM: pxa: eseries does not require FB   Arnd Bergmann
• [PATCH 25/30] ARM: OMAP depends on MMU   Arnd Bergmann
• [PATCH 25/30] ARM: OMAP depends on MMU   Santosh Shilimkar
• [PATCH 25/30] ARM: OMAP depends on MMU   Tony Lindgren
• [PATCH 25/51] ARM: mach-mv78xx0: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 26/26] ARM: pxa: sharpsl pm needs SPI   Arnd Bergmann
• [PATCH 26/26] ARM: pxa: sharpsl pm needs SPI   Eric Miao
• [PATCH 26/30] ARM: omap: add board autoselection   Arnd Bergmann
• [PATCH 26/30] ARM: omap: add board autoselection   Santosh Shilimkar
• [PATCH 26/30] ARM: omap: add board autoselection   Arnd Bergmann
• [PATCH 26/30] ARM: omap: add board autoselection   Santosh Shilimkar
• [PATCH 26/30] ARM: omap: add board autoselection   Cousson, Benoit
• [PATCH 26/30] ARM: omap: add board autoselection   Arnd Bergmann
• [PATCH 26/30] ARM: omap: add board autoselection   Tony Lindgren
• [PATCH 26/30] ARM: omap: add board autoselection   Arnd Bergmann
• [PATCH 26/30] ARM: omap: add board autoselection   Tony Lindgren
• [PATCH 26/30] ARM: omap: add board autoselection   Arnd Bergmann
• [PATCH 26/51] ARM: mach-msm: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 27/30] ARM: omap: select L2X0 cache on omap4   Arnd Bergmann
• [PATCH 27/30] ARM: omap: select L2X0 cache on omap4   Santosh Shilimkar
• [PATCH 27/30] ARM: omap: select L2X0 cache on omap4   Tony Lindgren
• [PATCH 27/51] ARM: mach-mxs: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 28/30] ARM: omap: select CPU_FREQ_TABLE where needed   Arnd Bergmann
• [PATCH 28/30] ARM: omap: select CPU_FREQ_TABLE where needed   Santosh Shilimkar
• [PATCH 28/30] ARM: omap: select CPU_FREQ_TABLE where needed   Arnd Bergmann
• [PATCH 28/30] ARM: omap: select CPU_FREQ_TABLE where needed   Santosh Shilimkar
• [PATCH 28/51] ARM: mach-netx: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 29/30] ARM: omap: select USB_ARCH_HAS_EHCI only when USB is enabled   Tony Lindgren
• [PATCH 29/30] ARM: omap: select USB_ARCH_HAS_EHCI only when USB is enabled   Arnd Bergmann
• [PATCH 29/49] dmaengine: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 29/51] ARM: mach-nomadik: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 3/3 v3.1] ARM: S3C64XX: Correct reservation of GPIOs for CPU module on Cragganmore   Mark Brown
• [PATCH 3/3 v3] ARM: EXYNOS4: Delete the power domain code depend on samsung SoC   Chanwoo Choi
• [PATCH 3/3] Add picosam9g45 board to Makefile   Nicu Pavel
• [PATCH 3/3] Add picosam9g45 board to Makefile   Nicu Pavel
• [PATCH 3/3] ARM 4Kstacks: Decrease poll and select stack usage, when using 4K stacks   Arnd Bergmann
• [PATCH 3/3] ARM 4Kstacks: Decrease poll and select stack usage, when using 4K stacks   Tim Bird
• [PATCH 3/3] arm/dt: tegra: add dts file for paz00   Stephen Warren
• [PATCH 3/3] arm/dt: tegra: add dts file for paz00   Marc Dietrich
• [PATCH 3/3] arm/dt: tegra: add dts file for paz00   Rob Herring
• [PATCH 3/3] arm/dt: tegra: add dts file for paz00   Stephen Warren
• [PATCH 3/3] arm/dt: tegra: add dts file for paz00   Stephen Warren
• [PATCH 3/3] arm/dt: tegra: add dts file for paz00   Marc Dietrich
• [PATCH 3/3] arm/dt: tegra: add dts file for paz00   Marc Dietrich
• [PATCH 3/3] arm/dt: tegra: add dts file for paz00   Stephen Warren
• [PATCH 3/3] arm/dt: tegra: add dts file for paz00   Marc Dietrich
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Alexander Stein
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Thomas Petazzoni
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCH 3/3] ARM: Exynos4: Add support for dt irq specifier to linux virq conversion   Grant Likely
• [PATCH 3/3] ARM: Exynos4: Add support for dt irq specifier to linux virq conversion   Thomas Abraham
• [PATCH 3/3] ARM: EXYNOS: Support ASV for Exynos4210   Jongpill Lee
• [PATCH 3/3] ARM: EXYNOS: Support ASV for Exynos4210   Sylwester Nawrocki
• [PATCH 3/3] ARM: EXYNOS: Support ASV for Exynos4210   Russell King - ARM Linux
• [PATCH 3/3] ARM: gic: add OF based initialization   Grant Likely
• [PATCH 3/3] ARM: pxa168/gplugd: Add support for SD port 1   Tanmay Upadhyay
• [PATCH 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names   Heiko Stübner
• [PATCH 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names   Rajeshwari Birje
• [PATCH 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names   Rajeshwari Shinde
• [PATCH 3/3] arm: samsung: remove all uses of clk_type member in sdhci platform data   Thomas Abraham
• [PATCH 3/3] mmc: sdhci-s3c: Add device tree support   Thomas Abraham
• [PATCH 3/3] omap4: panda: Pass regulator data from DT   Rajendra Nayak
• [PATCH 3/3] spi/pl022: skip default configuration before suspending   Viresh Kumar
• [PATCH 3/3] spi/pl022: skip default configuration before suspending   Russell King - ARM Linux
• [PATCH 3/3] spi/pl022: skip default configuration before suspending   Linus Walleij
• [PATCH 3/3] tty/serial: atmel_serial: __devinit_p for probe function   Russell King - ARM Linux
• [PATCH 3/3] tty/serial: atmel_serial: __devinit_p for probe function   Nicolas Ferre
• [PATCH 3/3] tty/serial: atmel_serial: __devinit_p for probe function   Arnd Bergmann
• [PATCH 3/3] tty/serial: atmel_serial: __devinit_p for probe function   Nicolas Ferre
• [PATCH 3/3] tty/serial: atmel_serial: __devinit_p for probe function   Nicolas Ferre
• [PATCH 3/3] tty/serial: atmel_serial: __devinit_p for probe function   Nicolas Ferre
• [PATCH 3/4 v2] ARM: OMAP3: cm-t35: fix audio   Igor Grinberg
• [PATCH 3/4] ARM: at91/dma: remove platform data from DMA controller   Vinod Koul
• [PATCH 3/4] ARM: at91/dma: remove platform data from DMA controller   Nicolas Ferre
• [PATCH 3/4] ARM: at91/smc: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] ARM: at91: rename at91cap9adk_defconfig to at91cap9_defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/4] ARM: OMAP3 PM: Enable IO Wake up   Vishwanath BS
• [PATCH 3/4] ARM: OMAP3: cm-t35: fix audio   Igor Grinberg
• [PATCH 3/4] ARM: OMAP3: cm-t35: fix audio   Sergei Shtylyov
• [PATCH 3/4] ARM: OMAP3: cm-t35: fix audio   Igor Grinberg
• [PATCH 3/4] ARM: OMAP: Remove calls to SRAM allocations for framebuffer   Tony Lindgren
• [PATCH 3/4] ARM: OMAP: Remove calls to SRAM allocations for framebuffer   Tomi Valkeinen
• [PATCH 3/4] ARM: OMAP: Remove calls to SRAM allocations for framebuffer   Tony Lindgren
• [PATCH 3/4] ARM: OMAP: Remove calls to SRAM allocations for framebuffer   Tomi Valkeinen
• [PATCH 3/4] ARM: OMAP: Remove calls to SRAM allocations for framebuffer   Tony Lindgren
• [PATCH 3/5 v4] ARM Realview PCIX board file changes   Colin Tuckley
• [PATCH 3/5] arm/imx: remove mx27_setup_weimcs() from mx27.h   Shawn Guo
• [PATCH 3/5] S3C24XX: Allow overriding of adc device name   Heiko Stübner
• [PATCH 3/6] arm/tegra: prepare early init for multiple tegra variants   Stephen Warren
• [PATCH 3/6] arm/tegra: prepare early init for multiple tegra variants   Russell King - ARM Linux
• [PATCH 3/6] arm/tegra: prepare early init for multiple tegra variants   Will Deacon
• [PATCH 3/6] arm/tegra: prepare early init for multiple tegra variants   pdeschrijver at nvidia.com
• [PATCH 3/6] ASoC: imx: eukrea_tlv320 needs i2c   Arnd Bergmann
• [PATCH 3/6] ASoC: imx: eukrea_tlv320 needs i2c   Mark Brown
• [PATCH 3/6] Documentation: add information for new sysfs soc bus functionality   Lee Jones
• [PATCH 3/7] amp/remoteproc: create rpmsg virtio device   Ohad Ben-Cohen
• [PATCH 3/7] ARM: imx: export imx_ioremap   Arnd Bergmann
• [PATCH 3/7] ARM: imx: export imx_ioremap   Shawn Guo
• [PATCH 3/7] ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done   Tony Lindgren
• [PATCH 3/8] ARM: at91/rtt: make rtt register base soc independant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/8] ARM: dma-mapping: implement dma sg methods on top of any generic dma ops   Marek Szyprowski
• [PATCH 3/9] ARM: SPMP8000: Add clk support   Zoltan Devai
• [PATCH 3/9] ARM: SPMP8000: Add clk support   Russell King - ARM Linux
• [PATCH 3/9] ARM: SPMP8000: Add clk support   Zoltan Devai
• [PATCH 3/9] ARM: SPMP8000: Add clk support   Mark Brown
• [PATCH 3/9] ARM: SPMP8000: Add clk support   Russell King - ARM Linux
• [PATCH 3/9] mm: alloc_contig_range() added   Marek Szyprowski
• [PATCH 3/9] mm: alloc_contig_range() added   Andrew Morton
• [PATCH 3/9] mm: alloc_contig_range() added   Mel Gorman
• [PATCH 3/9] OMAP3: HWMOD: Fix DSS reset   Paul Walmsley
• [PATCH 30/30] ARM: omap2: select ARM_AMBA for OMAP3_EMU   Arnd Bergmann
• [PATCH 30/30] ARM: omap2: select ARM_AMBA for OMAP3_EMU   Santosh Shilimkar
• [PATCH 30/30] ARM: omap2: select ARM_AMBA for OMAP3_EMU   Tony Lindgren
• [PATCH 30/51] ARM: mach-nuc93x: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 31/51] ARM: mach-orion5x: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 32/49] media: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 32/51] ARM: mach-pnx4008: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 32/55] i2c: irq: Remove IRQF_DISABLED   Ben Dooks
• [PATCH 33/51] ARM: mach-prima2: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 33/51] ARM: mach-prima2: use arm_arch_reset instead of arch_reset   Barry Song
• [PATCH 33/51] ARM: mach-prima2: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 34/51] ARM: mach-pxa: use arm_arch_reset instead of arch_reset   Marek Vasut
• [PATCH 34/51] ARM: mach-pxa: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 35/51] ARM: mach-realview: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 36/51] ARM: mach-rpc: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 37/51] ARM: mach-s3c64xx: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 38/51] ARM: mach-sa1100: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 39/51] ARM: mach-shark: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 4/4 v2] ARM: OMAP3: cm-t35: add reset for sb-t35 usb hub   Igor Grinberg
• [PATCH 4/4] ARM: at91/dma: DMA controller registering with DT support   Nicolas Ferre
• [PATCH 4/4] ARM: at91/pit: add DT support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] ARM: at91: rename at91sam9rlek_defconfig to at91sam9rl_defconfig   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/4] ARM: EXYNOS4: Add power domain to use generic Power domain Framework   Kukjin Kim
• [PATCH 4/4] ARM: EXYNOS4: Add power domain to use generic Power domain Framework   Chanwoo Choi
• [PATCH 4/4] arm: omap3: cm-t35: add reset for sb-t35 usb hub   Igor Grinberg
• [PATCH 4/4] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Vishwanath BS
• [PATCH 4/4] ARM: OMAP: Map SRAM later on with ioremap_exec()   Tony Lindgren
• [PATCH 4/4] ARM: OMAP: Map SRAM later on with ioremap_exec()   Nicolas Pitre
• [PATCH 4/4] ARM: OMAP: Map SRAM later on with ioremap_exec()   Tony Lindgren
• [PATCH 4/4] ARM: OMAP: Map SRAM later on with ioremap_exec()   Nicolas Pitre
• [PATCH 4/4] ARM: OMAP: Map SRAM later on with ioremap_exec()   Santosh Shilimkar
• [PATCH 4/4] ARM: OMAP: Map SRAM later on with ioremap_exec()   Tony Lindgren
• [PATCH 4/4] mmc: mmci: Fix incorrect handling of HW flow control for SDIO   Russell King - ARM Linux
• [PATCH 4/4] mmc: mmci: Fix incorrect handling of HW flow control for SDIO   Stefan Nilsson XK
• [PATCH 4/5 v4] Realview PCIX support - add main support module code   Colin Tuckley
• [PATCH 4/5 v4] Realview PCIX support - add main support module code   Russell King - ARM Linux
• [PATCH 4/5 v4] Realview PCIX support - add main support module code   Russell King - ARM Linux
• [PATCH 4/5 v4] Realview PCIX support - add main support module code   Colin Tuckley
• [PATCH 4/5] arm/imx: explicitly includes mach/hardware.h in pm-imx27.c   Shawn Guo
• [PATCH 4/5] gpiolib: handle deferral probe error   Alan Cox
• [PATCH 4/5] gpiolib: handle deferral probe error   Grant Likely
• [PATCH 4/5] gpiolib: handle deferral probe error   G, Manjunath Kondaiah
• [PATCH 4/5] gpiolib: handle deferral probe error   Grant Likely
• [PATCH 4/5] s3c-adc: Add support for S3C2443   Heiko Stübner
• [PATCH 4/6] arm/tegra: implement support for tegra30   pdeschrijver at nvidia.com
• [PATCH 4/6] arm/tegra: implement support for tegra30   Stephen Warren
• [PATCH 4/6] arm/tegra: implement support for tegra30   Russell King - ARM Linux
• [PATCH 4/6] ASoC: sh: use correct __iomem annotations   Arnd Bergmann
• [PATCH 4/6] ASoC: sh: use correct __iomem annotations   Mark Brown
• [PATCH 4/6] ASoC: sh: use correct __iomem annotations   Arnd Bergmann
• [PATCH 4/6] mach-ux500: export System-on-Chip information ux500 via sysfs   Lee Jones
• [PATCH 4/7] amp/omap: add a remoteproc driver   Ohad Ben-Cohen
• [PATCH 4/7] ARM: OMAP: Remove calls to SRAM allocations for framebuffer   Tony Lindgren
• [PATCH 4/8] ARM: dma-mapping: move all dma bounce code to separate dma ops structure   Marek Szyprowski
• [PATCH 4/8] ARM: rtc/at91sam9: use ioremap and iounmap   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Zoltan Devai
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Linus Walleij
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Jonathan Cameron
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Jonathan Cameron
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Mark Brown
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Zoltan Devai
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Mark Brown
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Arnd Bergmann
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Mark Brown
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Arnd Bergmann
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Jonathan Cameron
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Mark Brown
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Jonathan Cameron
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Russell King - ARM Linux
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Linus Walleij
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Mark Brown
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Jonathan Cameron
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Russell King - ARM Linux
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Arnd Bergmann
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Mark Brown
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Mark Brown
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Arnd Bergmann
• [PATCH 4/9] ARM: SPMP8000: Add ADC driver   Mark Brown
• [PATCH 4/9] mm: MIGRATE_CMA migration type added   Marek Szyprowski
• [PATCH 4/9] mm: MIGRATE_CMA migration type added   Andrew Morton
• [PATCH 4/9] mm: MIGRATE_CMA migration type added   Mel Gorman
• [PATCH 4/9] mm: MIGRATE_CMA migration type added   Michal Nazarewicz
• [PATCH 4/9] mm: MIGRATE_CMA migration type added   Michal Nazarewicz
• [PATCH 40/51] ARM: mach-shmobile: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 41/51] ARM: mach-tegra: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 42/49] rtc: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 42/51] ARM: mach-u300: use arm_arch_reset instead of arch_reset   Linus Walleij
• [PATCH 42/51] ARM: mach-u300: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 43/51] ARM: mach-versatile: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 44/51] ARM: mach-vt8500: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 45/49] watchdog: irq: Remove IRQF_DISABLED   Yong Zhang
• [PATCH 45/51] ARM: mach-w90x900: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 46/51] ARM: plat-spear: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 47/51] ARM: plat-tcc: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 48/51] ARM: plat-s5p: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 49/51] ARM: plat-mxc: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 49/55] video: irq: Remove IRQF_DISABLED   Florian Tobias Schandinat
• [PATCH 5/4] ARM: OMAP: Move set_globals initialization to happen in init_early   Tony Lindgren
• [PATCH 5/4] ARM: OMAP: Move set_globals initialization to happen in init_early   Tony Lindgren
• [PATCH 5/4] ARM: OMAP: Move set_globals initialization to happen in init_early   Tony Lindgren
• [PATCH 5/4] ARM: OMAP: Move set_globals initialization to happen in init_early   Nicolas Pitre
• [PATCH 5/4] ARM: OMAP: Move set_globals initialization to happen in init_early   Santosh Shilimkar
• [PATCH 5/4] ARM: OMAP: Move set_globals initialization to happen in init_early   Nicolas Pitre
• [PATCH 5/5 v4] ARM Realview PCIX build file changes   Colin Tuckley
• [PATCH 5/5] mmc: mxcmmc: explicitly includes mach/hardware.h   Shawn Guo
• [PATCH 5/5] omap: hsmmc: use platform_driver_register   Grant Likely
• [PATCH 5/5] s3c-adc: Add support for S3C2416/S3C2450   Heiko Stübner
• [PATCH 5/6] arm/tegra: pinmux tables and definitions for tegra30   pdeschrijver at nvidia.com
• [PATCH 5/6] arm/tegra: pinmux tables and definitions for tegra30   Stephen Warren
• [PATCH 5/6] ASoC: samsung: fix Kconfig dependencies   Arnd Bergmann
• [PATCH 5/6] ASoC: samsung: fix Kconfig dependencies   Mark Brown
• [PATCH 5/6] ASoC: samsung: fix Kconfig dependencies   Arnd Bergmann
• [PATCH 5/6] ASoC: samsung: fix Kconfig dependencies   Mark Brown
• [PATCH 5/6] ASoC: samsung: wm8994 depends on mfd_wm8994   Arnd Bergmann
• [PATCH 5/6] ASoC: samsung: wm8994 depends on mfd_wm8994   Mark Brown
• [PATCH 5/6] mach-ux500: move top level platform devices in sysfs to /sys/devices/socX   Lee Jones
• [PATCH 5/7] ARM: EXYNOS4: Add support external GIC   Marc Zyngier
• [PATCH 5/7] ARM: EXYNOS4: Add support external GIC   Kukjin Kim
• [PATCH 5/7] ARM: EXYNOS4: Add support external GIC   Marc Zyngier
• [PATCH 5/7] ARM: EXYNOS4: Add support external GIC   Marc Zyngier
• [PATCH 5/7] ARM: EXYNOS4: Add support external GIC   Kukjin Kim
• [PATCH 5/7] ARM: EXYNOS4: Add support external GIC   Will Deacon
• [PATCH 5/7] ARM: EXYNOS4: Add support external GIC   Marc Zyngier
• [PATCH 5/7] ARM: EXYNOS4: Add support external GIC   Changhwan Youn
• [PATCH 5/7] ARM: EXYNOS4: Add support external GIC   Marc Zyngier
• [PATCH 5/7] ARM: EXYNOS4: Add support external GIC   Kukjin Kim
• [PATCH 5/7] ARM: EXYNOS4: Add support external GIC   Russell King - ARM Linux
• [PATCH 5/7] ARM: EXYNOS4: Add support external GIC   Will Deacon
• [PATCH 5/7] ARM: OMAP: add amp/remoteproc support   Ohad Ben-Cohen
• [PATCH 5/7] ARM: OMAP: Map SRAM later on with ioremap_exec()   Tony Lindgren
• [PATCH 5/8] ARM: at91: add map_register entry point to soc setup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/8] ARM: dma-mapping: remove redundant code and cleanup   Marek Szyprowski
• [PATCH 5/9] ARM: SPMP8000: Add pinmux driver   Zoltan Devai
• [PATCH 5/9] ARM: SPMP8000: Add pinmux driver   Linus Walleij
• [PATCH 5/9] ARM: SPMP8000: Add pinmux driver   Barry Song
• [PATCH 5/9] ARM: SPMP8000: Add pinmux driver   Linus Walleij
• [PATCH 5/9] mm: MIGRATE_CMA isolation functions added   Marek Szyprowski
• [PATCH 50/51] ARM: plat-s3c24xx: use arm_arch_reset instead of arch_reset   Will Deacon
• [PATCH 51/51] ARM: reset: remove empty arch_reset definitions   Will Deacon
• [PATCH 6/6] arm/tegra: add support for tegra30 based board cardhu   pdeschrijver at nvidia.com
• [PATCH 6/6] arm/tegra: add support for tegra30 based board cardhu   Stephen Warren
• [PATCH 6/6] ASoC: samsung: add missing __devexit_p() annotations   Arnd Bergmann
• [PATCH 6/6] ASoC: samsung: add missing __devexit_p() annotations   Mark Brown
• [PATCH 6/6] mach-ux500: remove intermediary add_platform_device* functions   Lee Jones
• [PATCH 6/6] mach-ux500: remove intermediary add_platform_device* functions   Jamie Iles
• [PATCH 6/6] mach-ux500: remove intermediary add_platform_device* functions   Lee Jones
• [PATCH 6/6] mach-ux500: remove intermediary add_platform_device* functions   Jamie Iles
• [PATCH 6/7] amp/rpmsg: add virtio-based remote processor messaging bus   Ohad Ben-Cohen
• [PATCH 6/7] ARM: OMAP: Move set_globals initialization to happen in init_early   Tony Lindgren
• [PATCH 6/8] ARM: at91/pit: make register base soc independant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs   Marek Szyprowski
• [PATCH 6/9] ARM: SPMP8000: Add pwm driver   Zoltan Devai
• [PATCH 6/9] ARM: SPMP8000: Add pwm driver   Linus Walleij
• [PATCH 6/9] ARM: SPMP8000: Add pwm driver   Sascha Hauer
• [PATCH 6/9] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 6/9] drivers: add Contiguous Memory Allocator   Andrew Morton
• [PATCH 6/9] drivers: add Contiguous Memory Allocator   Russell King - ARM Linux
• [PATCH 6/9] drivers: add Contiguous Memory Allocator   Mel Gorman
• [PATCH 6/9] drivers: add Contiguous Memory Allocator   Michal Nazarewicz
• [PATCH 7/7] ARM: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCH 7/7] ARM: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCH 7/7] ARM: integrate CMA with DMA-mapping subsystem   Andrew Morton
• [PATCH 7/7] ARM: OMAP: Warn if omap_ioremap is called before SoC detection   Tony Lindgren
• [PATCH 7/7] ARM: OMAP: Warn if omap_ioremap is called before SoC detection   Nicolas Pitre
• [PATCH 7/7] samples/amp: add an rpmsg driver sample   Ohad Ben-Cohen
• [PATCH 7/8] ARM: at91: make smc register base soc independant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/8] ARM: dma-mapping: use alloc, mmap, free from dma_ops   Marek Szyprowski
• [PATCH 7/9] ARM: SPMP8000: Add dts file of SPMP8000 SoC and Letcool board   Jamie Iles
• [PATCH 7/9] ARM: SPMP8000: Add dts file of SPMP8000 SoC and Letcool board   Zoltan Devai
• [PATCH 7/9] X86: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCH 8/8] ARM: at91: usart: drop static map regs for dbgu   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/8] ARM: dma-mapping: add support for IOMMU mapper   Marek Szyprowski
• [PATCH 8/9] ARM: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCH 8/9] ARM: SPMP8000: Add support for the Letcool board   Zoltan Devai
• [PATCH 8/9] ARM: SPMP8000: Add support for the Letcool board   Arnd Bergmann
• [PATCH 8/9] ARM: SPMP8000: Add support for the Letcool board   Zoltan Devai
• [PATCH 8/9] ARM: SPMP8000: Add support for the Letcool board   Arnd Bergmann
• [PATCH 8/9] ARM: SPMP8000: Add support for the Letcool board   Russell King - ARM Linux
• [PATCH 8/9] regulator: helper to extract regulator node based on supply name   Grant Likely
• [PATCH 9/9] ARM: Samsung: use CMA for 2 memory banks for s5p-mfc device   Marek Szyprowski
• [PATCH 9/9] ARM: SPMP8000: Add Kconfig and Makefile entries to build the machine   Jamie Iles
• [PATCH 9/9] ARM: SPMP8000: Add Kconfig and Makefile entries to build the machine   Linus Walleij
• [PATCH 9/9] ARM: SPMP8000: Add Kconfig and Makefile entries to build the machine   Russell King - ARM Linux
• [PATCH 9/9] ARM: SPMP8000: Add Kconfig and Makefile entries to build the machine   Zoltan Devai
• [PATCH arm-soc.git/for-next] ARM: l2x0: Fix merge typo with "ARM: l2x0: add empty l2x0_of_init"   Jarkko Nikula
• [PATCH arm-soc.git/for-next] ARM: l2x0: Fix merge typo with "ARM: l2x0: add empty l2x0_of_init"   Arnd Bergmann
• [PATCH RE-SEND 1/5] ARM: S3C24XX: To merge s3c24xx devs.c files to one devs.c   Kukjin Kim
• [PATCH RE-SEND 2/5] ARM: S3C64XX: To merge devs.c files to one devs.c   Kukjin Kim
• [PATCH RE-SEND 3/5] ARM: S5P: To merge devs.c files to one devs.c   Kukjin Kim
• [PATCH RE-SEND 4/5] ARM: SAMSUNG: Cleanup plat-samsung/devs.c and devs.h   Kukjin Kim
• [PATCH Resend] arm: at91: fix NAND bus width decoding from system_rev   Christian Hitz
• [PATCH RESEND] ARM: smp_twd: Reconfigure clockevents after cpufreq change   Linus Walleij
• [PATCH RESEND] ARM: smp_twd: Reconfigure clockevents after cpufreq change   Thomas Gleixner
• [PATCH RESEND] ARM: smp_twd: Reconfigure clockevents after cpufreq change   Linus Walleij
• [PATCH RESEND] ARM: smp_twd: Reconfigure clockevents after cpufreq change   Thomas Gleixner
• [PATCH RESEND] mmc: sdio: rw extended, use a sg entry for each block   Nicolas Ferre
• [PATCH v10] pinctrl: add a driver for the U300 pinmux   Linus Walleij
• [PATCH v10] pinctrl: add a driver for the U300 pinmux   Barry Song
• [PATCH v16 00/12] OMAP: dmtimer: adaptation to platform_driver   Cousson, Benoit
• [PATCH v16 00/12] OMAP: dmtimer: adaptation to platform_driver   Tony Lindgren
• [PATCH V2 0/2] Add a common macro for creating struct clk_lookup entries   Rajeshwari Shinde
• [PATCH V2 0/2] Add a common macro for creating struct clk_lookup entries   Tushar Behera
• [PATCH v2 0/2] arm: omap4: hsmmc: pbias fixes   Balaji T K
• [PATCH v2 0/2] arm: omap4: hsmmc: pbias fixes   Tony Lindgren
• [PATCH V2 0/2] ARM: S3C2410: Remove section mismatch warning   Tushar Behera
• [PATCH v2 0/2] ARM: Samsung: Add basic device tree support for Exynos4 boards   Thomas Abraham
• [PATCH V2 0/2]: Add SPI Support on Exynos4   Padmavathi Venna
• [PATCH V2 0/3] ARM: SAMSUNG: Add support for sdhci clock lookup using generic names   Rajeshwari Shinde
• [PATCH V2 0/3] Clearify code paths for how to modify the power register   Ulf Hansson
• [PATCH V2 0/3] S5P64X0 PM Support   Kukjin Kim
• [PATCH v2 0/4] arm/tegra: Convert GPIO and pinmux to platform devs   Stephen Warren
• [PATCH v2 0/4] Fixes to twl4030-madc and add BeagleBoard support   Samuel Ortiz
• [PATCH v2 0/5] ARM: Add support for the SPMP8000 SoC and Letcool board v2   Zoltan Devai
• [PATCH v2 0/5] ARM: pxa: move gpio driver into drivers directory   Russell King - ARM Linux
• [PATCH v2 0/5] ARM: pxa: move gpio driver into drivers directory   Russell King - ARM Linux
• [PATCH v2 0/5] ARM: pxa: move gpio driver into drivers directory   Linus Walleij
• [PATCH v2 0/5] ARM: pxa: move gpio driver into drivers directory   Haojian Zhuang
• [PATCH v2 0/5] Device tree support for regulators   Rajendra Nayak
• [PATCH v2 0/5] tty/serial: atmel_serial: Device Tree support   Nicolas Ferre
• [PATCH v2 0/9] serial: samsung: rework clock lookup and add device tree support   Greg KH
• [PATCH v2 0/9] serial: samsung: rework clock lookup and add device tree support   Thomas Abraham
• [PATCH v2 0/9] serial: samsung: rework clock lookup and add device tree support   Kukjin Kim
• [PATCH v2 00/14] Sparse fixes for tegra   Olof Johansson
• [PATCH v2 00/14] Sparse fixes for tegra   Stephen Warren
• [PATCH v2 00/14] Sparse fixes for tegra   Arnd Bergmann
• [PATCH v2 01/14] ARM: tegra: annotate IO_*_VIRT pointers   Olof Johansson
• [PATCH v2 01/14] ARM: tegra: annotate IO_*_VIRT pointers   Russell King - ARM Linux
• [PATCH v2 01/14] ARM: tegra: annotate IO_*_VIRT pointers   Olof Johansson
• [PATCH v2 02/14] ARM: tegra: timer: don't cast __iomem pointers   Olof Johansson
• [PATCH v2 03/14] ARM: tegra: tegra2_clocks: don't cast __iomem pointers   Olof Johansson
• [PATCH v2 04/14] ARM: tegra: tegra2_clocks: 0 -> NULL changes   Olof Johansson
• [PATCH v2 05/14] ARM: tegra: pcie: don't cast __iomem pointers   Olof Johansson
• [PATCH v2 06/14] ARM: tegra: pcie: include board.h   Olof Johansson
• [PATCH v2 07/14] ARM: tegra: pcie: 0 -> NULL changes   Olof Johansson
• [PATCH v2 08/14] ARM: tegra: tegra_init_cache should be static   Olof Johansson
• [PATCH v2 09/14] ARM: tegra: tegra_rtc_read_ms should be static   Olof Johansson
• [PATCH V2 1/2] ARM: CLKDEV: Add Common Macro for clk_lookup   Rajeshwari Shinde
• [PATCH V2 1/2] ARM: EXYNOS4: Add SPI support   Padmavathi Venna
• [PATCH V2 1/2] ARM: EXYNOS4: Add SPI support   Kukjin Kim
• [PATCH V2 1/2] ARM: EXYNOS4: Add SPI support   Russell King - ARM Linux
• [PATCH V2 1/2] ARM: EXYNOS4: Add SPI support   Kukjin Kim
• [PATCH v2 1/2] arm: omap4: hsmmc: Fix Pbias configuration on regulator OFF   Balaji T K
• [PATCH V2 1/2] ARM: S3C2410: Add __init attribute to usb_simtec_init()   Sergei Shtylyov
• [PATCH V2 1/2] ARM: S3C2410: Add __init attribute to usb_simtec_init()   Tushar Behera
• [PATCH V2 1/2] ARM: S3C2410: Add __init attribute to usb_simtec_init()   Tushar Behera
• [PATCH v2 1/2] ARM: Samsung: Add Exynos4 device tree enabled board file   Thomas Abraham
• [PATCH v2 1/3] Add support for mini-box.com picoSAM9G45 board   Nicu Pavel
• [PATCH v2 1/3] ARM: Exynos4: Move timer irq numbers to end of linux irq space   Thomas Abraham
• [PATCH V2 1/3] mmc: mmci: Put power register deviations in variant data   Ulf Hansson
• [PATCH V2 1/3] SDHCI: S3C: Use generic clock names for sdhci bus clock options   Rajeshwari Shinde
• [PATCH v2 1/4] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs   Stephen Warren
• [PATCH v2 1/5] ARM: SPMP8000: Add machine base files   Zoltan Devai
• [PATCH v2 1/5] ARM: SPMP8000: Add machine base files   Arnd Bergmann
• [PATCH v2 1/5] ARM: SPMP8000: Add machine base files   Russell King - ARM Linux
• [PATCH v2 1/5] ARM: SPMP8000: Add machine base files   Zoltan Devai
• [PATCH v2 1/5] ARM: SPMP8000: Add machine base files   Zoltan Devai
• [PATCH v2 1/5] ARM: SPMP8000: Add machine base files   Arnd Bergmann
• [PATCH v2 1/5] ARM: SPMP8000: Add machine base files   Jamie Iles
• [PATCH v2 1/5] regulator: twl: Remove hardcoded board constraints from driver   Mark Brown
• [PATCH v2 1/5] regulator: twl: Remove hardcoded board constraints from driver   Rajendra Nayak
• [PATCH v2 1/5] regulator: twl: Remove hardcoded board constraints from driver   Rajendra Nayak
• [PATCH v2 1/5] tty/serial: RS485 bindings for device tree   Nicolas Ferre
• [PATCH v2 1/5] tty/serial: RS485 bindings for device tree   Grant Likely
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Rob Herring
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Mark Brown
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Rob Herring
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Mark Brown
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Russell King - ARM Linux
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Mark Brown
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Rob Herring
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Turquette, Mike
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Grant Likely
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Saravana Kannan
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Turquette, Mike
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Richard Zhao
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Russell King - ARM Linux
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Turquette, Mike
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Richard Zhao
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Mark Brown
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Richard Zhao
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Turquette, Mike
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Richard Zhao
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Richard Zhao
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Sascha Hauer
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Turquette, Mike
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Richard Zhao
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Mark Brown
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Richard Zhao
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Sascha Hauer
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Russell King - ARM Linux
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Richard Zhao
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Richard Zhao
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Shawn Guo
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Turquette, Mike
• [PATCH v2 1/7] clk: Add a generic clock infrastructure   Domenico Andreoli
• [PATCH v2 1/9] serial: samsung: Keep a copy of the location of platform data in driver's private data   Thomas Abraham
• [PATCH v2 10/14] ARM: tegra: tegra_powergate_is_powered should be static   Sergei Shtylyov
• [PATCH v2 10/14] ARM: tegra: tegra_powergate_is_powered should be static   Olof Johansson
• [PATCH v2 10/14] ARM: tegra: tegra_powergate_is_powered should be static   Olof Johansson
• [PATCH v2 11/14] ARM: tegra: tegra2_clocks: don't export some tables   Olof Johansson
• [PATCH V2 11/16] mmc: omap_hsmmc: ensure pbias configuration is always done   Chris Ball
• [PATCH v2 12/14] ARM: tegra: dma: staticify some tables and functions   Olof Johansson
• [PATCH v2 13/14] ARM: tegra: cpu-tegra: sparse type fix   Olof Johansson
• [PATCH v2 14/14] ARM: tegra: cpu-tegra: unexport two functions   Olof Johansson
• [PATCH v2 2/2] ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen board   Thomas Abraham
• [PATCH v2 2/2] arm: omap4: hsmmc: configure SDMMC1_DR0 properly   Balaji T K
• [PATCH V2 2/2] ARM: S3C2410: irq: Remove __init attributes to fix compilation warning   Tushar Behera
• [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro   Kukjin Kim
• [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro   Kyungmin Park
• [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro   Kukjin Kim
• [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro   Sylwester Nawrocki
• [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro   Arnd Bergmann
• [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro   Kukjin Kim
• [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro   Kukjin Kim
• [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro   Arnd Bergmann
• [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro   Kyungmin Park
• [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro   Kukjin Kim
• [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro   Kukjin Kim
• [PATCH V2 2/2] ARM: Using CLKDEV_INIT for creating clk_lookup instance   Rajeshwari Shinde
• [PATCH v2 2/3] Add kernel configuration option for picosam9g45 board   Nicu Pavel
• [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00   Stephen Warren
• [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00   Russell King - ARM Linux
• [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00   Grant Likely
• [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00   Russell King - ARM Linux
• [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00   Marc Dietrich
• [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00   Grant Likely
• [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00   Stephen Warren
• [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00   Stephen Warren
• [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00   Marc Dietrich
• [PATCH v2 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions   Thomas Abraham
• [PATCH V2 2/3] ARM: SAMSUNG: Remove SDHCI bus clocks from platform data   Rajeshwari Shinde
• [PATCH V2 2/3] mmc: mmci: Provide option to configure bus signal direction   Ulf Hansson
• [PATCH v2 2/4] arm/dt: Tegra: Add pinmux node to tegra20.dtsi   Stephen Warren
• [PATCH v2 2/5] ARM: SPMP8000: Add clk support   Zoltan Devai
• [PATCH v2 2/5] dt: add empty dt helpers for non-dt build   Rajendra Nayak
• [PATCH v2 2/5] dt: add empty dt helpers for non-dt build   Grant Likely
• [PATCH v2 2/5] tty/serial: atmel_serial: change platform_data variable name   Nicolas Ferre
• [PATCH v2 2/5] tty/serial: atmel_serial: change platform_data variable name   Grant Likely
• [PATCH v2 2/7] clk: Implement clk_set_rate   Richard Zhao
• [PATCH v2 2/7] clk: Implement clk_set_rate   Shawn Guo
• [PATCH v2 2/7] clk: Implement clk_set_rate   Turquette, Mike
• [PATCH v2 2/8] ARM: smp: populate logical CPU mapping during boot   Will Deacon
• [PATCH v2 2/9] serial: samsung: move handling of fclk/n clock to platform code   Thomas Abraham
• [PATCH v2 3/3] Add picosam9g45 board to Makefile   Nicu Pavel
• [PATCH v2 3/3] ARM: Exynos4: Enable conversion of GIC dt irq specifier to linux virq   Thomas Abraham
• [PATCH V2 3/3] mmc: mmci: Change vdd_handler to a generic ios_handler   Ulf Hansson
• [PATCH v2 3/4] gpio/tegra: Convert to a platform device   Stephen Warren
• [PATCH v2 3/4] gpio/tegra: Convert to a platform device   Olof Johansson
• [PATCH v2 3/4] gpio/tegra: Convert to a platform device   Olof Johansson
• [PATCH v2 3/5] ARM: SPMP8000: Add clocksource and clockevent drivers   Zoltan Devai
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Grant Likely
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Grant Likely
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Tony Lindgren
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Tony Lindgren
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Tony Lindgren
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Tony Lindgren
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Tony Lindgren
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Grant Likely
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Grant Likely
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Grant Likely
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Grant Likely
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Grant Likely
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Grant Likely
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Grant Likely
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data   Shawn Guo
• [PATCH v2 3/5] tty/serial: atmel_serial: whitespace and braces modifications   Nicolas Ferre
• [PATCH v2 3/5] tty/serial: atmel_serial: whitespace and braces modifications   Grant Likely
• [PATCH v2 3/7] clk: Add fixed-rate clock   Shawn Guo
• [PATCH v2 3/7] clk: Add fixed-rate clock   Turquette, Mike
• [PATCH v2 3/9] serial: samsung: switch to clkdev based clock lookup   Thomas Abraham
• [PATCH v2 4/4] arm/tegra: Convert pinmux driver to a platform device   Stephen Warren
• [PATCH V2 4/4] ARM: at91/dma: DMA controller registering with DT support   Sergei Shtylyov
• [PATCH V2 4/4] ARM: at91/dma: DMA controller registering with DT support   Nicolas Ferre
• [PATCH v2 4/5] ARM: SPMP8000: Add SPMP8000 SoC and Letcool board dts descriptions   Rob Herring
• [PATCH v2 4/5] ARM: SPMP8000: Add SPMP8000 SoC and Letcool board dts descriptions   Zoltan Devai
• [PATCH v2 4/5] regulator: adapt fixed regulator driver to dt   Rajendra Nayak
• [PATCH v2 4/5] regulator: adapt fixed regulator driver to dt   Grant Likely
• [PATCH v2 4/5] tty/serial: atmel_serial: auto-enumerate ports   Nicolas Ferre
• [PATCH v2 4/5] tty/serial: atmel_serial: auto-enumerate ports   Grant Likely
• [PATCH v2 4/7] clk: Add simple gated clock   Saravana Kannan
• [PATCH v2 4/7] clk: Add simple gated clock   Richard Zhao
• [PATCH v2 4/7] clk: Add simple gated clock   Turquette, Mike
• [PATCH v2 4/7] clk: Add simple gated clock   Russell King - ARM Linux
• [PATCH v2 4/7] clk: Add simple gated clock   Turquette, Mike
• [PATCH v2 4/7] clk: Add simple gated clock   Sascha Hauer
• [PATCH v2 4/7] clk: Add simple gated clock   Richard Zhao
• [PATCH v2 4/7] clk: Add simple gated clock   Turquette, Mike
• [PATCH v2 4/9] serial: samsung: remove struct 's3c24xx_uart_clksrc' and all uses of it   Grant Likely
• [PATCH v2 4/9] serial: samsung: remove struct 's3c24xx_uart_clksrc' and all uses of it   Thomas Abraham
• [PATCH V2 5/5] ARM: SAMSUNG: Cleanup resources by using macro   Kukjin Kim
• [PATCH v2 5/5] ARM: SPMP8000: Add Kconfig and Makefile entries   Zoltan Devai
• [PATCH v2 5/5] iommu/exynos: Use bus_set_iommu instead of register_iommu   Joerg Roedel
• [PATCH v2 5/5] regulator: map consumer regulator based on device tree   Mark Brown
• [PATCH v2 5/5] regulator: map consumer regulator based on device tree   Rajendra Nayak
• [PATCH v2 5/5] regulator: map consumer regulator based on device tree   Nayak, Rajendra
• [PATCH v2 5/5] regulator: map consumer regulator based on device tree   Mark Brown
• [PATCH v2 5/5] regulator: map consumer regulator based on device tree   Grant Likely
• [PATCH v2 5/5] regulator: map consumer regulator based on device tree   Shawn Guo
• [PATCH v2 5/5] regulator: map consumer regulator based on device tree   Rajendra Nayak
• [PATCH v2 5/5] tty/serial: atmel_serial: add device tree support   Nicolas Ferre
• [PATCH v2 5/5] tty/serial: atmel_serial: add device tree support   Grant Likely
• [PATCH v2 5/6] OMAP3+: Update DPLL Fint range for OMAP36xx and OMAP4xxx devices   Paul Walmsley
• [PATCH v2 5/6] OMAP3+: Update DPLL Fint range for OMAP36xx and OMAP4xxx devices   Jon Hunter
• [PATCH v2 5/7] ARM: highbank: add SMP support   Rob Herring
• [PATCH v2 5/7] ARM: highbank: add SMP support   Shawn Guo
• [PATCH v2 5/9] serial: samsung: remove all uses of get_clksrc and set_clksrc   Thomas Abraham
• [PATCH v2 6/6] OMAP4: Clock: Correct the name of SLIMBUS interface clocks   Paul Walmsley
• [PATCH v2 6/6] OMAP4: Clock: Correct the name of SLIMBUS interface clocks   Cousson, Benoit
• [PATCH v2 6/6] OMAP4: Clock: Correct the name of SLIMBUS interface clocks   Jon Hunter
• [PATCH v2 6/6] OMAP4: Clock: Correct the name of SLIMBUS interface clocks   Cousson, Benoit
• [PATCH v2 6/6] OMAP4: Clock: Correct the name of SLIMBUS interface clocks   Jon Hunter
• [PATCH v2 6/6] OMAP4: Clock: Correct the name of SLIMBUS interface clocks   Cousson, Benoit
• [PATCH v2 6/7] clk: Add initial WM831x clock driver   Grant Likely
• [PATCH v2 6/7] clk: Add initial WM831x clock driver   Mark Brown
• [PATCH v2 6/7] clk: Add initial WM831x clock driver   Grant Likely
• [PATCH v2 6/9] arm: samsung: register uart clocks to clock lookup list   Thomas Abraham
• [PATCH v2 7/9] serial: samsung: merge all SoC specific port reset functions   Thomas Abraham
• [PATCH v2 8/9] serial: samsung: merge probe() function from all SoC specific extensions   Thomas Abraham
• [PATCH v2 9/9] serial: samsung: add device tree support   Thomas Abraham
• [PATCH v2 9/9] serial: samsung: add device tree support   Grant Likely
• [PATCH V2] AMBA: Use suspend_noriq to force devices into runtime suspend   Ulf Hansson
• [PATCH v2] arm/tegra: pinmux: ioremap registers   Stephen Warren
• [PATCH v2] arm/tegra: pinmux: ioremap registers   Olof Johansson
• [PATCH v2] ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board   Kukjin Kim
• [PATCH v2] ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board   Kukjin Kim
• [PATCH v2] ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board   Sylwester Nawrocki
• [PATCH v2] ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board   Sylwester Nawrocki
• [PATCH v2] ARM: EXYNOS4: Configure MAX8997 PMIC for Origen   Kukjin Kim
• [PATCH v2] ARM: EXYNOS4: Configure MAX8997 PMIC for Origen   Kukjin Kim
• [PATCH v2] ARM: EXYNOS4: Configure MAX8997 PMIC for Origen   Inderpal Singh
• [PATCH v2] ARM: gic: fix irq_alloc_descs handling for sparse irq   Rob Herring
• [PATCH v2] ARM: localtimer: add header linux/errno.h explicitly   Shawn Guo
• [PATCH v2] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Lauri Hintsala
• [PATCH v2] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Lauri Hintsala
• [PATCH v2] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Lauri Hintsala
• [PATCH v2] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Sascha Hauer
• [PATCH v2] ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list   Tony Lindgren
• [PATCH v2] ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list   Paul Walmsley
• [PATCH v2] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection   Steve Sakoman
• [PATCH v2] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection   Russell King - ARM Linux
• [PATCH v2] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection   Paul Walmsley
• [PATCH v2] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection   Paul Walmsley
• [PATCH v2] arm: omap: Fix errors and warnings when building for one board   Premi, Sanjeev
• [PATCH v2] arm: omap: Fix errors and warnings when building for one board   Sanjeev Premi
• [PATCH v2] ARM: pl330: Fix a race condition   Javi Merino
• [PATCH v2] ARM: tegra: fix compilation error due to mach/hardware.h removal   Olof Johansson
• [PATCH v2] asm-generic/gpio.h: merge basic gpiolib wrappers   Mike Frysinger
• [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files   Russell King - ARM Linux
• [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files   Rob Herring
• [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files   Nicolas Ferre
• [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files   Nicolas Ferre
• [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files   Rob Herring
• [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files   Nicolas Ferre
• [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files   Rob Herring
• [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files   Grant Likely
• [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files   Nicolas Ferre
• [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files   Nicolas Ferre
• [PATCH v2] Fix s3c24xx build errors if !CONFIG_PM   Domenico Andreoli
• [PATCH v2] Fix s3c24xx build errors if !CONFIG_PM   Kukjin Kim
• [PATCH v2] gpio/samsung: Add device tree support for Exynos4   Thomas Abraham
• [PATCH v2] gpio/samsung: Complain loudly if we don't know the SoC   Mark Brown
• [PATCH v2] gpio/samsung: Complain loudly if we don't know the SoC   Kukjin Kim
• [PATCH v2] gpio: pl061: add DT binding support   Rob Herring
• [PATCH v2] gpio: pl061: add DT binding support   Grant Likely
• [PATCH v2] irq: support domains with non-zero hwirq base   Rob Herring
• [PATCH v2] irq: support domains with non-zero hwirq base   Rob Herring
• [PATCH v2] irq: support domains with non-zero hwirq base   Grant Likely
• [PATCH v2] irq: support domains with non-zero hwirq base   Thomas Gleixner
• [PATCH v2] mach-ep93xx: break out GPIO driver specifics   Russell King - ARM Linux
• [PATCH v2] mach-ep93xx: break out GPIO driver specifics   Linus Walleij
• [PATCH v2] mach-ep93xx: break out GPIO driver specifics   Mika Westerberg
• [PATCH v2] mach-ep93xx: break out GPIO driver specifics   Russell King - ARM Linux
• [PATCH v2] mach-ep93xx: break out GPIO driver specifics   Mika Westerberg
• [PATCH v2] mach-ep93xx: break out GPIO driver specifics   Linus Walleij
• [PATCH V2] mach-kirkwood: Add support for D-Link DNS-325   Jamie Lentin
• [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader   Tomi Valkeinen
• [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader   Paul Walmsley
• [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader   Archit Taneja
• [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader   Cousson, Benoit
• [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader   Paul Walmsley
• [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader   Paul Walmsley
• [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader   Paul Walmsley
• [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader   Grant Likely
• [PATCH v2] omap: dmtimer: convert printk to pr_err / WARN   Víctor Manuel Jáquez Leal
• [PATCH v2] omap: dmtimer: convert printk to pr_err / WARN   Tony Lindgren
• [PATCH v2] pinmux: add a driver for the CSR SiRFprimaII pinmux   Barry Song
• [PATCH v2] pinmux: add a driver for the CSR SiRFprimaII pinmux   Arnd Bergmann
• [PATCH v2] pinmux: add a driver for the CSR SiRFprimaII pinmux   Barry Song
• [PATCH v2] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file   Rafael J. Wysocki
• [PATCH v2] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file   Rafael J. Wysocki
• [PATCH v2] regulator: Add driver for gpio-controlled regulators   Heiko Stübner
• [PATCH v2] regulator: max8649 Convert max8649 to use regmap api   jhbird.choi at samsung.com
• [PATCH v2] regulator: max8649 Convert max8649 to use regmap api   jhbird.choi at gmail.com
• [PATCH v2] regulator: max8649 Convert max8649 to use regmap api   Haojian Zhuang
• [PATCH v2] regulator: max8649 Convert max8649 to use regmap api   Mark Brown
• [PATCH v2] regulator: max8649 Convert max8649 to use regmap api   Mark Brown
• [PATCH v2] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Barry Song
• [PATCH v2] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Barry Song
• [PATCH v2] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Greg KH
• [PATCH v2] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Barry Song
• [PATCH v2] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Alan Cox
• [PATCH v2] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Linus Walleij
• [PATCH v2] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Barry Song
• [PATCH v2] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Barry Song
• [PATCH v2] virtio: Add platform bus driver for memory mapped virtio device   Pawel Moll
• [PATCH V3 (bugfix to fold)] ARM: at91: usb_a9g20.dts: fix memory location   Nicolas Ferre
• [PATCH v3 0/2] iommu/exynos: Add IOMMU and Enhance System MMU driver for Exynos4   Kukjin Kim
• [PATCH V3 0/3] ARM: SAMSUNG: Add support for sdhci clock lookup using generic names   Rajeshwari Shinde
• [PATCH v3 0/3] paz00 updates for 3.3   Marc Dietrich
• [PATCH v3 0/4] Device tree support for regulators   Rajendra Nayak
• [PATCH v3 0/4] Device tree support for regulators   Mark Brown
• [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA   Nicolas Ferre
• [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA   Nicolas Ferre
• [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA   Nicolas Ferre
• [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA   Vinod Koul
• [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA   Vinod Koul
• [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA   Nicolas Ferre
• [PATCH V3 0/4]: ARM: SAMSUNG: Add SPI clkdev support   Padmavathi Venna
• [PATCH V3 0/4]: ARM: SAMSUNG: Add SPI clkdev support   Kukjin Kim
• [PATCH V3 0/4]: ARM: SAMSUNG: Add SPI clkdev support   Kukjin Kim
• [PATCH v3 0/5] S3C2443/S3C2416: Implement support for ADC   Heiko Stübner
• [PATCH v3 0/5] S3C2443/S3C2416: Implement support for ADC   Kukjin Kim
• [PATCH v3 0/7] clean pxa gpio driver   Haojian Zhuang
• [PATCH V3 1/2] ARM: at91: dt: at91sam9g45 family and board device tree files   Baruch Siach
• [PATCH V3 1/2] ARM: at91: dt: at91sam9g45 family and board device tree files   Nicolas Ferre
• [PATCH V3 1/2] ARM: at91: dt: at91sam9g45 family and board device tree files   Nicolas Ferre
• [PATCH V3 1/2] ARM: at91: dt: at91sam9g45 family and board device tree files   Rob Herring
• [PATCH V3 1/2] ARM: at91: dt: at91sam9g45 family and board device tree files   Nicolas Ferre
• [PATCH v3 1/2] ARM: EXYNOS4: Change System MMU device definition   Kukjin Kim
• [PATCH v3 1/2] ARM: EXYNOS4: Change System MMU device definition   Kukjin Kim
• [PATCH v3 1/2] ARM: EXYNOS4: Change System MMU device definition   Russell King - ARM Linux
• [PATCH v3 1/3] dt: add empty of_machine_is_compatible   Stephen Warren
• [PATCH V3 1/3] SDHCI: S3C: Use generic clock names for sdhci bus clock options   Rajeshwari Shinde
• [PATCH V3 1/4] ARM: S3C64XX: Add SPI clkdev support   Padmavathi Venna
• [PATCH v3 1/4] dmaengine: at_hdmac: platform data move to use .id_table   Nicolas Ferre
• [PATCH v3 1/4] dmaengine: at_hdmac: platform data move to use .id_table   Grant Likely
• [PATCH v3 1/4] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v3 1/4] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v3 1/4] regulator: helper routine to extract regulator_init_data   Nayak, Rajendra
• [PATCH v3 1/4] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v3 1/4] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Roedel, Joerg
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   KyongHo Cho
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Roedel, Joerg
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Roedel, Joerg
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Roedel, Joerg
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Roedel, Joerg
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   KyongHo Cho
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Roedel, Joerg
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Roedel, Joerg
• [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v3 1/7] ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ   Haojian Zhuang
• [PATCH V3 2/2] ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support   Rob Herring
• [PATCH V3 2/2] ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support   Nicolas Ferre
• [PATCH v3 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   Kukjin Kim
• [PATCH v3 2/3] arm/tegra: Don't create duplicate gpio and pinmux devices   Olof Johansson
• [PATCH v3 2/3] arm/tegra: Don't create duplicate gpio and pinmux devices   Stephen Warren
• [PATCH v3 2/3] ARM: OMAP: TI814X: Add cpu type macros and detection support   Pedanekar, Hemant
• [PATCH V3 2/3] ARM: SAMSUNG: Remove SDHCI bus clocks from platform data   Rajeshwari Shinde
• [PATCH V3 2/4] ARM: S5PC100: Add SPI clkdev support   Padmavathi Venna
• [PATCH v3 2/4] dmaengine: at_hdmac: add device tree support   Nicolas Ferre
• [PATCH v3 2/4] dmaengine: at_hdmac: add device tree support   Grant Likely
• [PATCH v3 2/4] dmaengine: at_hdmac: add device tree support   Nicolas Ferre
• [PATCH v3 2/4] regulator: adapt fixed regulator driver to dt   Rajendra Nayak
• [PATCH v3 2/4] regulator: adapt fixed regulator driver to dt   Mark Brown
• [PATCH v3 2/7] ARM: pxa: use chained interrupt for GPIO0 and GPIO1   Haojian Zhuang
• [PATCH v3 3/3] arm/tegra: Add device-tree support for TrimSlice board   Stephen Warren
• [PATCH v3 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM   Pedanekar, Hemant
• [PATCH v3 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM   Pedanekar, Hemant
• [PATCH v3 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM   Tony Lindgren
• [PATCH v3 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM   Pedanekar, Hemant
• [PATCH v3 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM   Igor Grinberg
• [PATCH v3 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM   Igor Grinberg
• [PATCH V3 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names   Rajeshwari Shinde
• [PATCH V3 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names   Heiko Stübner
• [PATCH V3 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names   Rajeshwari Birje
• [PATCH v3 3/4] ARM: at91/dma: remove platform data from DMA controller   Grant Likely
• [PATCH v3 3/4] ARM: at91/dma: remove platform data from DMA controller   Nicolas Ferre
• [PATCH V3 3/4] ARM: S5P64X0: Add SPI clkdev support   Padmavathi Venna
• [PATCH v3 3/4] regulator: pass additional of_node to regulator_register()   Rajendra Nayak
• [PATCH v3 3/4] regulator: pass additional of_node to regulator_register()   Mark Brown
• [PATCH v3 3/7] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Haojian Zhuang
• [PATCH v3 4/4] ARM: at91/dma: DMA controller registering with DT support   Nicolas Ferre
• [PATCH v3 4/4] ARM: at91/dma: DMA controller registering with DT support   Grant Likely
• [PATCH V3 4/4] ARM: S5PV210: Add SPI clkdev support   Padmavathi Venna
• [PATCH v3 4/4] regulator: map consumer regulator based on device tree   Mark Brown
• [PATCH v3 4/4] regulator: map consumer regulator based on device tree   Rajendra Nayak
• [PATCH v3 4/7] ARM: pxa: rename NR_BUILTIN_GPIO   Haojian Zhuang
• [PATCH v3 5/7] ARM: pxa: change gpio driver to platform driver   Haojian Zhuang
• [PATCH v3 6/7] ARM: pxa: move gpio-pxa.h into include directory   Haojian Zhuang
• [PATCH v3 6/7] ARM: pxa: move gpio-pxa.h into include directory   Linus Walleij
• [PATCH v3 6/7] ARM: pxa: move gpio-pxa.h into include directory   Arnd Bergmann
• [PATCH v3 6/7] ARM: pxa: move gpio-pxa.h into include directory   Haojian Zhuang
• [PATCH v3 7/7] ARM: pxa: add clk support in gpio driver   Haojian Zhuang
• [PATCH v3 RE-SEND 1/2] ARM: EXYNOS4: Change System MMU device definition   Kukjin Kim
• [PATCH v3 RE-SEND 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   Kukjin Kim
• [PATCH v3 RE-SEND 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   Sylwester Nawrocki
• [PATCH v3 RE-SEND 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCH v3.1-rc9] ARM: populate processor tag in proc-cpuinfo for Uni-processor.   Russell King - ARM Linux
• [PATCH v3.1-rc9] ARM: populate processor tag in proc-cpuinfo for Uni-processor.   Andrew Morton
• [PATCH v3.1-rc9] ARM: populate processor tag in proc-cpuinfo for Uni-processor.   Russell King - ARM Linux
• [PATCH v3.1-rc9] ARM: populate processor tag in proc-cpuinfo for Uni-processor.   Andrew Morton
• [PATCH v3.1-rc9] ARM: populate processor tag in proc-cpuinfo for Uni-processor.   Srinivas KANDAGATLA
• [PATCH v3] ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board   Kukjin Kim
• [PATCH v3] ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board   Sylwester Nawrocki
• [PATCH v3] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection   Kevin Hilman
• [PATCH v3] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection   Kevin Hilman
• [PATCH v3] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection   Paul Walmsley
• [PATCH v3] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection   Paul Walmsley
• [PATCH v3] ASoC: samsung: wm8994 depends on mfd_wm8994   Arnd Bergmann
• [PATCH v3] ASoC: samsung: wm8994 depends on mfd_wm8994   Mark Brown
• [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver   Linus Walleij
• [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver   Arnd Bergmann
• [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH v3] omap: dmtimer: convert printk to pr_err   Víctor Manuel Jáquez Leal
• [PATCH v3] omap: dmtimer: convert printk to pr_err   Russell King - ARM Linux
• [PATCH v3] omap: dmtimer: convert printk to pr_err   Víctor M. Jáquez L.
• [PATCH v3] omap: dmtimer: convert printk to pr_err   Joe Perches
• [PATCH v3] omap: dmtimer: convert printk to pr_err   Russell King - ARM Linux
• [PATCH v3] omap: dmtimer: convert printk to pr_err   Joe Perches
• [PATCH v3] omap: dmtimer: convert printk to pr_err   Russell King - ARM Linux
• [PATCH v3] omap: dmtimer: convert printk to pr_err   Joe Perches
• [PATCH v3] pinmux: add a driver for the CSR SiRFprimaII pinmux   Barry Song
• [PATCH v3] pinmux: add a driver for the CSR SiRFprimaII pinmux   Linus Walleij
• [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device   Pawel Moll
• [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device   Pawel Moll
• [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device   Rusty Russell
• [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device   Pawel Moll
• [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device   Rusty Russell
• [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device   Pawel Moll
• [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device   Rusty Russell
• [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device   Pawel Moll
• [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device   Rusty Russell
• [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device   Pawel Moll
• [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device   Rusty Russell
• [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device   Pawel Moll
• [PATCH v4 0/2] iommu/exynos: Add IOMMU and Enhance System MMU driver for Exynos4   KyongHo Cho
• [PATCH v4 0/3] add Atmel ISI, ov2640 support for sam9m10/sam9g45   Josh Wu
• [PATCH v4 0/3] Add support for TI814X processor series   Hemant Pedanekar
• [PATCH V4 0/3] ARM: SAMSUNG: Add support for sdhci clock lookup using generic names   Rajeshwari Shinde
• [PATCH v4 0/4] genirq: handling GIC per-cpu interrupts   Marc Zyngier
• [PATCH v4 0/4] genirq: handling GIC per-cpu interrupts   Russell King - ARM Linux
• [PATCH v4 0/4] genirq: handling GIC per-cpu interrupts   Marc Zyngier
• [PATCH v4 0/4] genirq: handling GIC per-cpu interrupts   Marc Zyngier
• [PATCH v4 0/4] genirq: handling GIC per-cpu interrupts   Shawn Guo
• [PATCH v4 0/4] genirq: handling GIC per-cpu interrupts   Russell King - ARM Linux
• [PATCH v4 0/7] add initial imx6q support   Shawn Guo
• [PATCH v4 0/7] iommu: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v4 0/8] Clean gpio in arch-pxa and arch-mmp   Haojian Zhuang
• [PATCH v4 00/10] Per SoC descriptor   Marc Zyngier
• [PATCH v4 01/10] ARM: SoC: Introduce per SoC descriptor   Marc Zyngier
• [PATCH v4 02/10] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Nicolas Pitre
• [PATCH v4 02/10] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Marc Zyngier
• [PATCH v4 02/10] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Kyungmin Park
• [PATCH v4 02/10] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Kyungmin Park
• [PATCH v4 02/10] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Marc Zyngier
• [PATCH v4 03/10] ARM: SoC: convert VExpress/RealView to SoC descriptor   Marc Zyngier
• [PATCH v4 04/10] ARM: SoC: convert OMAP4 to SoC descriptor   Marc Zyngier
• [PATCH v4 04/10] ARM: SoC: convert OMAP4 to SoC descriptor   Shilimkar, Santosh
• [PATCH v4 04/10] ARM: SoC: convert OMAP4 to SoC descriptor   Marc Zyngier
• [PATCH v4 05/10] ARM: SoC: convert Tegra to SoC descriptor   Marc Zyngier
• [PATCH v4 05/10] ARM: SoC: convert Tegra to SoC descriptor   Stephen Warren
• [PATCH v4 05/10] ARM: SoC: convert Tegra to SoC descriptor   Marc Zyngier
• [PATCH v4 06/10] ARM: SoC: convert Exynos4 to SoC descriptor   Marc Zyngier
• [PATCH v4 06/10] ARM: SoC: convert Exynos4 to SoC descriptor   Kyungmin Park
• [PATCH v4 06/10] ARM: SoC: convert Exynos4 to SoC descriptor   Marc Zyngier
• [PATCH v4 06/10] ARM: SoC: convert Exynos4 to SoC descriptor   Kukjin Kim
• [PATCH v4 06/10] ARM: SoC: convert Exynos4 to SoC descriptor   Marc Zyngier
• [PATCH v4 06/10] ARM: SoC: convert Exynos4 to SoC descriptor   Kukjin Kim
• [PATCH v4 07/10] ARM: SoC: convert MSM SMP to SoC descriptor   Marc Zyngier
• [PATCH v4 08/10] ARM: SoC: convert ux500 to SoC descriptor   Marc Zyngier
• [PATCH v4 09/10] ARM: SoC: convert shmobile sh73a0 to SoC descriptor   Marc Zyngier
• [PATCH v4 1/2] ARM: EXYNOS4: Change System MMU device definition   KyongHo Cho
• [PATCH v4 1/2] dmaengine: at_hdmac: platform data move to use .id_table   Nicolas Ferre
• [PATCH v4 1/2] dmaengine: at_hdmac: platform data move to use .id_table   Grant Likely
• [PATCH v4 1/3] [media] at91: add code to enable/disable ISI_MCK clock   Guennadi Liakhovetski
• [PATCH v4 1/3] [media] at91: add code to enable/disable ISI_MCK clock   Wu, Josh
• [PATCH v4 1/3] [media] at91: add code to enable/disable ISI_MCK clock   Josh Wu
• [PATCH v4 1/3] ARM: OMAP: TI81XX: Prepare for addition of TI814X support   Hemant Pedanekar
• [PATCH V4 1/3] SDHCI: S3C: Use generic clock names for sdhci bus clock options   Rajeshwari Shinde
• [PATCH v4 1/4] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs   Olof Johansson
• [PATCH v4 1/4] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs   Stephen Warren
• [PATCH v4 1/4] genirq: Add support for per-cpu dev_id interrupts   Marc Zyngier
• [PATCH v4 1/4] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v4 1/7] iommu/core: stop converting bytes to page order back and forth   Ohad Ben-Cohen
• [PATCH v4 1/8] ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ   Haojian Zhuang
• [PATCH v4 1/8] ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ   Grant Likely
• [PATCH v4 10/10] ARM: smp: Make SoC descriptor mandatory for SMP platforms   Marc Zyngier
• [PATCH v4 2/2] dmaengine: at_hdmac: add device tree support   Nicolas Ferre
• [PATCH v4 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCH v4 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   Ohad Ben-Cohen
• [PATCH v4 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCH v4 2/3] ARM: OMAP: TI814X: Add cpu type macros and detection support   Hemant Pedanekar
• [PATCH V4 2/3] ARM: SAMSUNG: Remove SDHCI bus clocks from platform data   Rajeshwari Shinde
• [PATCH v4 2/3] at91: add parameters for at91_add_device_isi function   Guennadi Liakhovetski
• [PATCH v4 2/3] at91: add parameters for at91_add_device_isi function   Josh Wu
• [PATCH v4 2/4] arm/dt: Tegra: Add pinmux node to tegra20.dtsi   Stephen Warren
• [PATCH v4 2/4] arm/dt: Tegra: Add pinmux node to tegra20.dtsi   Olof Johansson
• [PATCH v4 2/4] genirq: percpu: allow interrupt type to be set at enable time   Marc Zyngier
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v4 2/8] ARM: pxa: use chained interrupt for GPIO0 and GPIO1   Haojian Zhuang
• [PATCH v4 2/8] ARM: pxa: use chained interrupt for GPIO0 and GPIO1   Grant Likely
• [PATCH v4 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM   Hemant Pedanekar
• [PATCH V4 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names   Sylwester Nawrocki
• [PATCH V4 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names   Russell King - ARM Linux
• [PATCH V4 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names   Rajeshwari Shinde
• [PATCH V4 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names   Sylwester Nawrocki
• [PATCH V4 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names   Rajeshwari Birje
• [PATCH V4 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names   Sylwester Nawrocki
• [PATCH V4 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names   Rajeshwari Birje
• [PATCH V4 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names   Sylwester Nawrocki
• [PATCH v4 3/3] at91: add Atmel ISI and ov2640 support on sam9m10/sam9g45 board   Josh Wu
• [PATCH v4 3/3] at91: add Atmel ISI and ov2640 support on sam9m10/sam9g45 board   Guennadi Liakhovetski
• [PATCH v4 3/4] ARM: gic: consolidate PPI handling   Marc Zyngier
• [PATCH v4 3/4] gpio/tegra: Convert to a platform device   Stephen Warren
• [PATCH v4 3/4] gpio/tegra: Convert to a platform device   Olof Johansson
• [PATCH v4 3/4] gpio/tegra: Convert to a platform device   Stephen Warren
• [PATCH v4 3/4] gpio/tegra: Convert to a platform device   Grant Likely
• [PATCH v4 3/4] gpio/tegra: Convert to a platform device   Grant Likely
• [PATCH v4 3/4] gpio/tegra: Convert to a platform device   Olof Johansson
• [PATCH v4 3/4] gpio/tegra: Convert to a platform device   Stephen Warren
• [PATCH v4 3/4] gpio/tegra: Convert to a platform device   Olof Johansson
• [PATCH v4 3/7] arm/imx: add gic_handle_irq function   Shawn Guo
• [PATCH v4 3/7] arm/imx: add gic_handle_irq function   Russell King - ARM Linux
• [PATCH v4 3/7] iommu/omap: announce supported page sizes   Ohad Ben-Cohen
• [PATCH v4 3/8] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Haojian Zhuang
• [PATCH v4 3/8] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Grant Likely
• [PATCH v4 3/8] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Haojian Zhuang
• [PATCH v4 3/8] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Eric Miao
• [PATCH v4 3/8] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Haojian Zhuang
• [PATCH v4 4/4] arm/tegra: Convert pinmux driver to a platform device   Olof Johansson
• [PATCH v4 4/4] arm/tegra: Convert pinmux driver to a platform device   Stephen Warren
• [PATCH v4 4/4] ARM: gic, local timers: use the request_percpu_irq() interface   Marc Zyngier
• [PATCH v4 4/7] iommu/msm: announce supported page sizes   Ohad Ben-Cohen
• [PATCH v4 4/8] ARM: pxa: rename NR_BUILTIN_GPIO   Haojian Zhuang
• [PATCH v4 4/8] ARM: pxa: rename NR_BUILTIN_GPIO   Grant Likely
• [PATCH v4 5/7] iommu/amd: announce supported page sizes   Ohad Ben-Cohen
• [PATCH v4 5/8] ARM: pxa: change gpio driver to platform driver   Haojian Zhuang
• [PATCH v4 5/8] ARM: pxa: change gpio driver to platform driver   Grant Likely
• [PATCH v4 5/8] ARM: pxa: change gpio driver to platform driver   Russell King - ARM Linux
• [PATCH v4 6/7] iommu/intel: announce supported page sizes   Ohad Ben-Cohen
• [PATCH v4 6/8] ARM: pxa: move gpio-pxa.h into include directory   Haojian Zhuang
• [PATCH v4 6/8] ARM: pxa: move gpio-pxa.h into include directory   Grant Likely
• [PATCH v4 7/7] iommu/core: remove the temporary pgsize settings   Ohad Ben-Cohen
• [PATCH v4 7/8] ARM: pxa: add clk support in gpio driver   Haojian Zhuang
• [PATCH v4 7/8] ARM: pxa: add clk support in gpio driver   Grant Likely
• [PATCH v4 8/8] ARM: pxa: move macros into gpio-pxa.c   Haojian Zhuang
• [PATCH v4 8/8] ARM: pxa: move macros into gpio-pxa.c   Arnd Bergmann
• [PATCH v4 8/8] ARM: pxa: move macros into gpio-pxa.c   Eric Miao
• [PATCH v4 8/8] ARM: pxa: move macros into gpio-pxa.c   Haojian Zhuang
• [PATCH v4 8/8] ARM: pxa: move macros into gpio-pxa.c   Eric Miao
• [PATCH v4 8/8] ARM: pxa: move macros into gpio-pxa.c   Arnd Bergmann
• [PATCH v4] ARM: cache-l2x0: add resume entry for l2 in secure mode   Russell King - ARM Linux
• [PATCH v4] ARM: cache-l2x0: add resume entry for l2 in secure mode   Lorenzo Pieralisi
• [PATCH v4] ARM: cache-l2x0: add resume entry for l2 in secure mode   Russell King - ARM Linux
• [PATCH v4] ARM: cache-l2x0: add resume entry for l2 in secure mode   Barry Song
• [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver   Russell King - ARM Linux
• [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH v4] virtio: Add platform bus driver for memory mapped virtio device   Rusty Russell
• [PATCH v4] virtio: Add platform bus driver for memory mapped virtio device   Pawel Moll
• [PATCH v5 0/2] Add device tree support for Samsung's keypad controller driver   Kukjin Kim
• [PATCH v5 0/2] Add device tree support for Samsung's keypad controller driver   Kukjin Kim
• [PATCH v5 0/2] Add device tree support for Samsung's keypad controller driver   Thomas Abraham
• [PATCH v5 0/2] iommu/exynos: Add IOMMU and Enhance System MMU driver for Exynos4   KyongHo Cho
• [PATCH V5 0/3] ARM: SAMSUNG: Add support for sdhci clock lookup using generic names   Rajeshwari Shinde
• [PATCH v5 0/7] arm: pmu: support pmu/perf on OMAP4   ming.lei at canonical.com
• [PATCH v5 0/8] add initial imx6q support   Shawn Guo
• [PATCH v5 00/10] Per SoC descriptor   Marc Zyngier
• [PATCH v5 00/10] Per SoC descriptor   Russell King - ARM Linux
• [PATCH v5 00/10] Per SoC descriptor   Marc Zyngier
• [PATCH v5 00/10] Per SoC descriptor   Russell King - ARM Linux
• [PATCH v5 00/10] Per SoC descriptor   Arnd Bergmann
• [PATCH v5 00/11] change gpio as platform driver   Haojian Zhuang
• [PATCH v5 00/11] change gpio as platform driver   Haojian Zhuang
• [PATCH v5 01/10] ARM: SoC: Introduce per SoC descriptor   Marc Zyngier
• [PATCH v5 01/11] ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ   Haojian Zhuang
• [PATCH v5 02/10] ARM: SoC: Add per SoC SMP and CPU hotplug operations   Marc Zyngier
• [PATCH v5 02/11] ARM: pxa: use chained interrupt for GPIO0 and GPIO1   Haojian Zhuang
• [PATCH v5 03/10] ARM: SoC: convert VExpress/RealView to SoC descriptor   Marc Zyngier
• [PATCH v5 03/11] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Haojian Zhuang
• [PATCH v5 03/11] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Russell King - ARM Linux
• [PATCH v5 04/10] ARM: SoC: convert OMAP4 to SoC descriptor   Marc Zyngier
• [PATCH v5 04/11] ARM: pxa: recognize gpio number and type   Haojian Zhuang
• [PATCH v5 05/10] ARM: SoC: convert Tegra to SoC descriptor   Marc Zyngier
• [PATCH v5 05/11] ARM: pxa: rename NR_BUILTIN_GPIO   Haojian Zhuang
• [PATCH v5 06/10] ARM: SoC: convert Exynos4 to SoC descriptor   Marc Zyngier
• [PATCH v5 06/11] ARM: pxa: remove head file in plat-pxa   Haojian Zhuang
• [PATCH v5 06/11] ARM: pxa: remove head file in plat-pxa   Russell King - ARM Linux
• [PATCH v5 07/10] ARM: SoC: convert MSM SMP to SoC descriptor   Marc Zyngier
• [PATCH v5 07/11] ARM: pxa: use little endian read write in gpio driver   Haojian Zhuang
• [PATCH v5 08/10] ARM: SoC: convert ux500 to SoC descriptor   Marc Zyngier
• [PATCH v5 08/11] ARM: pxa: use generic gpio operation instead of gpio register   Russell King - ARM Linux
• [PATCH v5 08/11] ARM: pxa: use generic gpio operation instead of gpio register   Haojian Zhuang
• [PATCH v5 09/10] ARM: SoC: convert shmobile sh73a0 to SoC descriptor   Marc Zyngier
• [PATCH v5 09/11] ARM: pxa: change gpio to platform device   Haojian Zhuang
• [PATCH v5 1/2] ARM: EXYNOS4: Change System MMU device definition   KyongHo Cho
• [PATCH v5 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option   Thomas Abraham
• [PATCH v5 1/3] AM35x: Using OMAP3 generic hwmods   Paul Walmsley
• [PATCH V5 1/3] SDHCI: S3C: Use generic clock names for sdhci bus clock options   Kukjin Kim
• [PATCH V5 1/3] SDHCI: S3C: Use generic clock names for sdhci bus clock options   Chris Ball
• [PATCH V5 1/3] SDHCI: S3C: Use generic clock names for sdhci bus clock options   Rajeshwari Birje
• [PATCH V5 1/3] SDHCI: S3C: Use generic clock names for sdhci bus clock options   Rajeshwari Shinde
• [PATCH v5 1/7] arm: introduce cross trigger interface helpers   ming.lei at canonical.com
• [PATCH v5 1/8] arm/imx6q: add device tree source   Shawn Guo
• [PATCH v5 10/10] ARM: smp: Make SoC descriptor mandatory for SMP platforms   Marc Zyngier
• [PATCH v5 10/11] ARM: mmp: clear gpio edge detect   Haojian Zhuang
• [PATCH v5 11/11] ARM: pxa: add clk support in gpio driver   Haojian Zhuang
• [PATCH v5 11/11] ARM: pxa: add clk support in gpio driver   Russell King - ARM Linux
• [PATCH v5 2/2] input: samsung-keypad: Add device tree support   Thomas Abraham
• [PATCH v5 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCH v5 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCH v5 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   Roedel, Joerg
• [PATCH v5 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCH V5 2/3] ARM: SAMSUNG: Remove SDHCI bus clocks from platform data   Rajeshwari Shinde
• [PATCH v5 2/3] omap_twl: Prevent SR to enable for am3517/am3505 devices   Koyamangalath, Abhilash
• [PATCH v5 2/3] omap_twl: Prevent SR to enable for am3517/am3505 devices   Kevin Hilman
• [PATCH v5 2/7] arm: pmu: allow platform specific irq enable/disable handling   Ming Lei
• [PATCH v5 2/7] arm: pmu: allow platform specific irq enable/disable handling   ming.lei at canonical.com
• [PATCH v5 2/8] arm/imx6q: add core definitions and low-level debug uart   Shawn Guo
• [PATCH V5 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names   Rajeshwari Shinde
• [PATCH v5 3/7] arm: perf: support device with other non-irq resources   Will Deacon
• [PATCH v5 3/7] arm: perf: support device with other non-irq resources   Ming Lei
• [PATCH v5 3/7] arm: perf: support device with other non-irq resources   Will Deacon
• [PATCH v5 3/7] arm: perf: support device with other non-irq resources   Paul Walmsley
• [PATCH v5 3/7] arm: perf: support device with other non-irq resources   Ming Lei
• [PATCH v5 3/7] arm: perf: support device with other non-irq resources   Paul Walmsley
• [PATCH v5 3/7] arm: perf: support device with other non-irq resources   ming.lei at canonical.com
• [PATCH v5 3/8] arm/imx: add gic_handle_irq function   Shawn Guo
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   ming.lei at canonical.com
• [PATCH v5 4/8] arm/imx6q: add core drivers clock, gpc, mmdc and src   Shawn Guo
• [PATCH v5 5/7] arm: omap4: create pmu device via hwmod   ming.lei at canonical.com
• [PATCH v5 5/8] arm/imx6q: add smp and cpu hotplug support   Shawn Guo
• [PATCH v5 6/7] arm: omap4: support pmu   ming.lei at canonical.com
• [PATCH v5 6/8] arm/imx6q: add device tree machine support   Shawn Guo
• [PATCH v5 7/7] arm: omap4: pmu: support runtime pm   ming.lei at canonical.com
• [PATCH v5 7/8] arm/imx6q: add suspend/resume support   Shawn Guo
• [PATCH v5 8/8] arm/imx: merge i.MX3 and i.MX6   Shawn Guo
• [PATCH v5] dmaengine: add CSR SiRFprimaII DMAC driver   Barry Song
• [PATCH v5] dmaengine: add CSR SiRFprimaII DMAC driver   Vinod Koul
• [PATCH v5] power: bq20z75: devicetree init support   Rhyland Klein
• [PATCH v6 0/2] Add device tree support for i.mx51/53 boards   Shawn Guo
• [PATCH v6 0/2] Add device tree support for i.mx51/53 boards   Sascha Hauer
• [PATCH v6 0/2] Add device tree support for i.mx51/53 boards   Russell King - ARM Linux
• [PATCH v6 0/2] Add device tree support for i.mx51/53 boards   Shawn Guo
• [PATCH v6 0/2] Add device tree support for i.mx51/53 boards   Shawn Guo
• [PATCH v6 0/2] Add device tree support for i.mx51/53 boards   Arnd Bergmann
• [PATCH v6 0/2] Add device tree support for i.mx51/53 boards   Shawn Guo
• [PATCH v6 0/3] Add support for tegra2 based ventana board   Peter De Schrijver
• [PATCH v6 0/3] Add support for tegra2 based ventana board   Peter De Schrijver
• [PATCH v6 00/10] Add device tree support for PL330 dma controller driver   Vinod Koul
• [PATCH v6 00/10] Add device tree support for PL330 dma controller driver   Vinod Koul
• [PATCH v6 00/10] Add device tree support for PL330 dma controller driver   Thomas Abraham
• [PATCH v6 00/10] Add device tree support for PL330 dma controller driver   Kukjin Kim
• [PATCH v6 00/10] Add device tree support for PL330 dma controller driver   Thomas Abraham
• [PATCH v6 00/10] Add device tree support for PL330 dma controller driver   Kukjin Kim
• [PATCH v6 01/10] DMA: PL330: move filter function into driver   Thomas Abraham
• [PATCH v6 01/16] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Rajendra Nayak
• [PATCH v6 01/16] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Vishwanath Sripathy
• [PATCH v6 01/16] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Kevin Hilman
• [PATCH v6 01/16] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Rajendra Nayak
• [PATCH v6 02/10] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Boojin Kim
• [PATCH v6 02/10] DMA: PL330: Infer transfer direction from transfer request instead of platform data   Thomas Abraham
• [PATCH v6 02/16] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Rajendra Nayak
• [PATCH v6 02/16] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Govindraj
• [PATCH v6 02/16] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Rajendra Nayak
• [PATCH v6 02/16] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Govindraj
• [PATCH v6 02/16] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Kevin Hilman
• [PATCH v6 02/16] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Govindraj
• [PATCH v6 03/10] ARM: EXYNOS4: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH v6 03/10] ARM: EXYNOS4: Modify platform data for pl330 driver   Boojin Kim
• [PATCH v6 03/10] ARM: EXYNOS4: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH v6 03/10] ARM: EXYNOS4: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH v6 04/10] DMA: PL330: Add device tree support   Thomas Abraham
• [PATCH v6 04/10] DMA: PL330: Add device tree support   Boojin Kim
• [PATCH v6 04/16] OMAP2+: UART: cleanup 8250 console driver support   Kevin Hilman
• [PATCH v6 04/16] OMAP2+: UART: cleanup 8250 console driver support   Govindraj
• [PATCH v6 04/16] OMAP2+: UART: cleanup 8250 console driver support   Kevin Hilman
• [PATCH v6 04/16] OMAP2+: UART: cleanup 8250 console driver support   Govindraj
• [PATCH v6 05/10] ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers   Thomas Abraham
• [PATCH v6 05/16] OMAP2+: UART: Cleanup part of clock gating mechanism for uart   Kevin Hilman
• [PATCH v6 05/16] OMAP2+: UART: Cleanup part of clock gating mechanism for uart   Govindraj
• [PATCH v6 06/10] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build   Thomas Abraham
• [PATCH v6 06/16] OMAP2+: UART: Remove certain feilds from omap_uart_state struct   Kevin Hilman
• [PATCH v6 06/16] OMAP2+: UART: Remove certain feilds from omap_uart_state struct   Govindraj
• [PATCH v6 07/10] ARM: Exynos4: Add a alias for pdma clocks   Thomas Abraham
• [PATCH v6 07/16] OMAP2+: UART: Add default mux for all uarts.   Kevin Hilman
• [PATCH v6 07/16] OMAP2+: UART: Add default mux for all uarts.   Govindraj
• [PATCH v6 08/10] ARM: S5P64x0: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH v6 08/16] OMAP2+: UART: Store certain reg values to port structure   Kevin Hilman
• [PATCH v6 08/16] OMAP2+: UART: Store certain reg values to port structure   Govindraj
• [PATCH v6 09/10] ARM: S5PC100: Modify platform data for pl330 driver   Boojin Kim
• [PATCH v6 09/10] ARM: S5PC100: Modify platform data for pl330 driver   Anca Emanuel
• [PATCH v6 09/10] ARM: S5PC100: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH v6 09/10] ARM: S5PC100: Modify platform data for pl330 driver   Kukjin Kim
• [PATCH v6 09/10] ARM: S5PC100: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver   Kevin Hilman
• [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver   Kevin Hilman
• [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver   Govindraj
• [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver   Govindraj
• [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver   Kevin Hilman
• [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver   Govindraj
• [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver   Kevin Hilman
• [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver   Govindraj
• [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver   Kevin Hilman
• [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver   Govindraj
• [PATCH v6 1/2] arm/mx5: add device tree support for imx53 boards   Shawn Guo
• [PATCH v6 10/10] ARM: S5PV210: Modify platform data for pl330 driver   Boojin Kim
• [PATCH v6 10/10] ARM: S5PV210: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH v6 10/16] OMAP2+: UART: Modify omap_uart_can_sleep function   Kevin Hilman
• [PATCH v6 10/16] OMAP2+: UART: Modify omap_uart_can_sleep function   Govindraj
• [PATCH v6 10/16] OMAP2+: UART: Modify omap_uart_can_sleep function   Kevin Hilman
• [PATCH v6 10/16] OMAP2+: UART: Modify omap_uart_can_sleep function   Govindraj
• [PATCH v6 10/16] OMAP2+: UART: Modify omap_uart_can_sleep function   Jean Pihet
• [PATCH v6 11/16] OMAP2+: UART: Move errata handling from serial.c to omap-serial   Kevin Hilman
• [PATCH v6 11/16] OMAP2+: UART: Move errata handling from serial.c to omap-serial   Govindraj
• [PATCH v6 12/16] OMAP2+: UART: Allow UART parameters to be configured from board file.   Kevin Hilman
• [PATCH v6 12/16] OMAP2+: UART: Allow UART parameters to be configured from board file.   Govindraj
• [PATCH v6 14/16] OMAP2+: UART: Take console_lock in suspend path if not taken   Kevin Hilman
• [PATCH v6 14/16] OMAP2+: UART: Take console_lock in suspend path if not taken   Govindraj
• [PATCH v6 14/16] OMAP2+: UART: Take console_lock in suspend path if not taken   Kevin Hilman
• [PATCH v6 14/16] OMAP2+: UART: Take console_lock in suspend path if not taken   Govindraj
• [PATCH v6 15/16] OMAP2+: UART: Enable back uart clocks with runtime API for early console   Kevin Hilman
• [PATCH v6 15/16] OMAP2+: UART: Enable back uart clocks with runtime API for early console   Govindraj
• [PATCH v6 15/16] OMAP2+: UART: Enable back uart clocks with runtime API for early console   Kevin Hilman
• [PATCH v6 15/16] OMAP2+: UART: Enable back uart clocks with runtime API for early console   Govindraj
• [PATCH v6 15/16] OMAP2+: UART: Enable back uart clocks with runtime API for early console   Kevin Hilman
• [PATCH v6 15/16] OMAP2+: UART: Enable back uart clocks with runtime API for early console   Govindraj
• [PATCH v6 15/16] OMAP2+: UART: Enable back uart clocks with runtime API for early console   Kevin Hilman
• [PATCH v6 2/2] arm/mx5: add device tree support for imx51 babbage   Shawn Guo
• [PATCH V6 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names   Rajeshwari Shinde
• [PATCH V6] SDHCI: S3C: Use generic clock names for sdhci bus clock options   Rajeshwari Shinde
• [PATCH v7 0/3] Add support for tegra2 based ventana board   Peter De Schrijver
• [PATCH v7 0/3] Add support for tegra2 based ventana board   Peter De Schrijver
• [PATCH v7 0/3] Add support for tegra2 based ventana board   Peter De Schrijver
• [PATCH v7 0/3] Add support for tegra2 based ventana board   Stephen Warren
• [PATCH v7 00/21] OMAP2+: UART: Runtime adaptation + cleanup   Govindraj.R
• [PATCH v7 01/21] OMAP2+: UART: cleanup + remove uart pm specific API   Govindraj.R
• [PATCH v7 02/21] OMAP2+: UART: cleanup 8250 console driver support   Govindraj.R
• [PATCH v7 03/10] ARM: EXYNOS4: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH v7 03/21] OMAP2+: UART: Cleanup part of clock gating mechanism for uart   Govindraj.R
• [PATCH v7 04/21] OMAP2+: UART: Add default mux for all uarts.   Govindraj.R
• [PATCH v7 05/21] OMAP2+: UART: Remove mapbase/membase fields from pdata.   Govindraj.R
• [PATCH v7 06/21] OMAP2+: UART: Add runtime pm support for omap-serial driver   Govindraj.R
• [PATCH v7 07/21] OMAP2+: UART: Remove context_save and move context restore to driver   Govindraj.R
• [PATCH v7 08/16] ARM: LPAE: Page table maintenance for the 3-level format   Russell King - ARM Linux
• [PATCH v7 08/16] ARM: LPAE: Page table maintenance for the 3-level format   Catalin Marinas
• [PATCH v7 08/21] OMAP2+: UART: Ensure all reg values configured are available from port structure   Govindraj.R
• [PATCH v7 09/10] ARM: S5PC100: Modify platform data for pl330 driver   Thomas Abraham
• [PATCH v7 09/21] OMAP2+: UART: Remove uart reset function.   Govindraj.R
• [PATCH v7 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards   Peter De Schrijver
• [PATCH v7 10/21] OMAP2+: UART: Get context loss count to context restore   Govindraj.R
• [PATCH v7 11/16] ARM: LPAE: Add fault handling support   Russell King - ARM Linux
• [PATCH v7 11/21] OMAP2+: UART: Move errata handling from serial.c to omap-serial   Govindraj.R
• [PATCH v7 12/21] OMAP2+: UART: Add wakeup mechanism for omap-uarts   Govindraj.R
• [PATCH v7 13/16] ARM: LPAE: Add identity mapping support for the 3-level page table format   Russell King - ARM Linux
• [PATCH v7 13/21] OMAP2+: UART: Remove old and unused clocks handling funcs   Govindraj.R
• [PATCH v7 14/21] OMAP2+: UART: Allow UART parameters to be configured from board file.   Govindraj.R
• [PATCH v7 15/16] ARM: LPAE: add support for ATAG_MEM64   Russell King - ARM Linux
• [PATCH v7 15/21] OMAP2+: UART: Make the RX_TIMEOUT for DMA configurable for each UART   Govindraj.R
• [PATCH v7 16/16] ARM: LPAE: Add the Kconfig entries   Russell King - ARM Linux
• [PATCH v7 16/21] OMAP2+: UART: Remove custom activate funcs and use generic funcs.   Govindraj.R
• [PATCH v7 17/21] OMAP2+: UART: Remove omap_uart_can_sleep and add pm_qos   Govindraj.R
• [PATCH v7 18/21] OMAP2+: UART: remove temporary variable used to count uart instance   Govindraj.R
• [PATCH v7 19/21] OMAP2+: UART: Use custom activate func for console uart.   Govindraj.R
• [PATCH v7 2/3] arm/tegra: add support for ventana pinmuxing   Peter De Schrijver
• [PATCH v7 20/21] OMAP2+: UART: Avoid uart idling on suspend for no_console_suspend usecase   Govindraj.R
• [PATCH v7 21/21] OMAP2+: UART: Do not gate uart clocks if used for debug_prints   Mohammed, Afzal
• [PATCH v7 21/21] OMAP2+: UART: Do not gate uart clocks if used for debug_prints   Mohammed, Afzal
• [PATCH v7 21/21] OMAP2+: UART: Do not gate uart clocks if used for debug_prints   Govindraj
• [PATCH v7 21/21] OMAP2+: UART: Do not gate uart clocks if used for debug_prints   Mohammed, Afzal
• [PATCH v7 21/21] OMAP2+: UART: Do not gate uart clocks if used for debug_prints   Govindraj
• [PATCH v7 21/21] OMAP2+: UART: Do not gate uart clocks if used for debug_prints   Mohammed, Afzal
• [PATCH v7 21/21] OMAP2+: UART: Do not gate uart clocks if used for debug_prints   Govindraj
• [PATCH v7 21/21] OMAP2+: UART: Do not gate uart clocks if used for debug_prints   Govindraj.R
• [PATCH v7 3/3] arm/tegra: device tree support for ventana board   Peter De Schrijver
• [PATCH v7 3/3] arm/tegra: device tree support for ventana board   Stephen Warren
• [PATCH v7 3/3] arm/tegra: device tree support for ventana board   Peter De Schrijver
• [PATCH v7 3/3] arm/tegra: device tree support for ventana board   Stephen Warren
• [PATCH v8 0/3] Add support for tegra2 based ventana board   Peter De Schrijver
• [PATCH V8 0/4] cpuidle: Global registration of idle states with per-cpu statistics   Deepthi Dharwar
• [PATCH v8 00/24] gpio/omap: driver cleanup and fixes   Tarun Kanti DebBarma
• [PATCH v8 01/24] gpio/omap: remove dependency on gpio_bank_count   Tarun Kanti DebBarma
• [PATCH v8 02/24] gpio/omap: use flag to identify wakeup domain   Tarun Kanti DebBarma
• [PATCH v8 03/24] gpio/omap: make gpio_context part of gpio_bank structure   Tarun Kanti DebBarma
• [PATCH v8 04/24] gpio/omap: handle save/restore context in GPIO driver   Tarun Kanti DebBarma
• [PATCH v8 05/24] gpio/omap: make non-wakeup GPIO part of pdata   Tarun Kanti DebBarma
• [PATCH v8 06/24] gpio/omap: avoid cpu checks during module ena/disable   Tarun Kanti DebBarma
• [PATCH v8 07/24] gpio/omap: further cleanup using wkup_en register   Tarun Kanti DebBarma
• [PATCH v8 08/24] gpio/omap: use level/edge detect reg offsets   Tarun Kanti DebBarma
• [PATCH v8 09/24] gpio/omap: remove hardcoded offsets in context save/restore   Tarun Kanti DebBarma
• [PATCH v8 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards   Peter De Schrijver
• [PATCH V8 1/4] cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state   Deepthi Dharwar
• [PATCH v8 10/24] gpio/omap: cleanup set_gpio_triggering function   Tarun Kanti DebBarma
• [PATCH v8 11/24] gpio/omap: cleanup omap_gpio_mod_init function   Tarun Kanti DebBarma
• [PATCH v8 12/24] gpio/omap: use pinctrl offset instead of macro   Tarun Kanti DebBarma
• [PATCH v8 13/24] gpio/omap: remove unnecessary bit-masking for read access   Tarun Kanti DebBarma
• [PATCH v8 14/24] gpio/omap: remove bank->method & METHOD_* macros   Tarun Kanti DebBarma
• [PATCH v8 15/24] gpio/omap: fix bankwidth for OMAP7xx MPUIO   Tarun Kanti DebBarma
• [PATCH v8 16/24] gpio/omap: use pm-runtime framework   Tarun Kanti DebBarma
• [PATCH v8 17/24] gpio/omap: fix debounce clock handling   Tarun Kanti DebBarma
• [PATCH v8 18/24] gpio/omap: optimize suspend and resume functions   Tarun Kanti DebBarma
• [PATCH v8 19/24] gpio/omap: cleanup prepare_for_idle and resume_after_idle   Tarun Kanti DebBarma
• [PATCH v8 2/3] arm/tegra: add support for ventana pinmuxing   Peter De Schrijver
• [PATCH V8 2/4] cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()   Deepthi Dharwar
• [PATCH v8 20/24] gpio/omap: remove omap_gpio_save_context overhead   Tarun Kanti DebBarma
• [PATCH v8 21/24] gpio/omap: save and restore debounce registers   Tarun Kanti DebBarma
• [PATCH v8 22/24] gpio/omap: enable irq at the end of all configuration in restore   Tarun Kanti DebBarma
• [PATCH v8 23/24] gpio/omap: restore OE only after setting the output level   Tarun Kanti DebBarma
• [PATCH v8 24/24] gpio/omap: handle set_dataout reg capable IP on restore   Tarun Kanti DebBarma
• [PATCH v8 3/3] arm/tegra: device tree support for ventana board   Peter De Schrijver
• [PATCH v8 3/3] arm/tegra: device tree support for ventana board   Stephen Warren
• [PATCH V8 3/4] cpuidle: Split cpuidle_state structure and move per-cpu statistics fields   Deepthi Dharwar
• [PATCH V8 4/4] cpuidle: Single/Global registration of idle states   Deepthi Dharwar
• [PATCH v8 REPOST 17/24] gpio/omap: fix debounce clock handling   Tarun Kanti DebBarma
• [PATCH v8 REPOST 21/24] gpio/omap: save and restore debounce registers   Tarun Kanti DebBarma
• [PATCH v9 0/3] Add support for tegra2 based ventana board   pdeschrijver at nvidia.com
• [PATCH v9 0/3] Add support for tegra2 based ventana board   Stephen Warren
• [PATCH v9 0/3] Add support for tegra2 based ventana board   Olof Johansson
• [PATCH v9 0/3] Add support for tegra2 based ventana board   Peter De Schrijver
• [PATCH v9 0/4] cpuidle: Global registration of idle states with per-cpu statistics   Deepthi Dharwar
• [PATCH v9 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards   pdeschrijver at nvidia.com
• [PATCH v9 1/4] cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state   Deepthi Dharwar
• [PATCH v9 2/3] arm/tegra: add support for ventana pinmuxing   pdeschrijver at nvidia.com
• [PATCH v9 2/4] cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()   Arjan van de Ven
• [PATCH v9 2/4] cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()   Deepthi Dharwar
• [PATCH v9 2/4] cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()   Deepthi Dharwar
• [PATCH V9 2/5] ahci_plt Add the board_ids and pi refer to different features   Jeff Garzik
• [PATCH V9 2/5] ahci_plt Add the board_ids and pi refer to different features   Sascha Hauer
• [PATCH v9 3/3] arm/tegra: device tree support for ventana board   pdeschrijver at nvidia.com
• [PATCH v9 3/4] cpuidle: Split cpuidle_state structure and move per-cpu statistics fields   Deepthi Dharwar
• [PATCH v9 4/4] cpuidle: Single/Global registration of idle states   Deepthi Dharwar
• [PATCH-V3 1/4] arm:omap:am33xx: Update common omap platform files   Tony Lindgren
• [PATCH-V3 2/4] arm:omap:am33xx: Update common OMAP machine specific sources   Tony Lindgren
• [PATCH-V3 3/4] arm:omap:am33xx: Create board support and enable build for AM335XEVM   Tony Lindgren
• [PATCH-V3 4/4] arm:omap:am33xx: Add low level debugging support   Tony Lindgren
• [PATCH/RFC] mm: add vm_area_add_early()   Andrew Morton
• [PATCH/RFC] mm: add vm_area_add_early()   Nicolas Pitre
• [PATCH/RFT 0/12] step towards removal of mach/system.h   Nicolas Pitre
• [PATCH/RFT 0/12] step towards removal of mach/system.h   Will Deacon
• [PATCH] [3.3] [RESEND] ARM: tegra: fuse: use apbio dma for register access   Stephen Warren
• [PATCH] [3.3] [RESEND] ARM: tegra: fuse: use apbio dma for register access   Olof Johansson
• [PATCH] [3.3] ARM: tegra: emc: max rate based on emc table   Olof Johansson
• [PATCH] [3.3] ARM: tegra: emc: max rate based on emc table   Colin Cross
• [PATCH] [3.3] ARM: tegra: emc: max rate based on emc table   Olof Johansson
• [PATCH] [3.3] ARM: tegra: use APB DMA for accessing APB devices   Olof Johansson
• [PATCH] [3.3] ARM: tegra: use APB DMA for accessing APB devices   Colin Cross
• [PATCH] [3.3] ARM: tegra: use APB DMA for accessing APB devices   Stephen Warren
• [PATCH] [3.3] ARM: tegra: use APB DMA for accessing APB devices   Olof Johansson
• [PATCH] [3.3] ARM: tegra: use APB DMA for accessing APB devices   Olof Johansson
• [PATCH] [3.3] ARM: tegra: use APB DMA for accessing APB devices   Stephen Warren
• [PATCH] [3.3] ARM: tegra: use APB DMA for accessing APB devices   Olof Johansson
• [PATCH] [RESEND] ARM: tegra: devices.c should include devices.h   Olof Johansson
• [PATCH] [RESEND] ARM: tegra: devices.c should include devices.h   Stephen Warren
• [PATCH] [RESEND] [TRIVIAL] ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT'   Paul Bolle
• [PATCH] [RFC PATCH] ARM: kprobes: Make breakpoint setting/clearing SMP safe   Rabin Vincent
• [PATCH] [RFC PATCH] ARM: kprobes: Make breakpoint setting/clearing SMP safe   Tixy
• [PATCH] [RFC PATCH] ARM: kprobes: Make breakpoint setting/clearing SMP safe   Tixy
• [PATCH] [TRIVIAL] ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT'   Jiri Kosina
• [PATCH] [TRIVIAL] ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT'   Paul Bolle
• [PATCH] [TRIVIAL] ARM: pxa: Fix typo 'CONFIG_BACKLIGHT_PWM__MODULE'   Jiri Kosina
• [PATCH] [TRIVIAL] ARM: pxa: Fix typo 'CONFIG_BACKLIGHT_PWM__MODULE'   Marek Vasut
• [PATCH] [TRIVIAL] ARM: pxa: Fix typo 'CONFIG_BACKLIGHT_PWM__MODULE'   Nicolas Kaiser
• [PATCH] [WATCHDOG] move coh901327 state holders   Linus Walleij
• [PATCH] Add missing include of linux/ftrace.h   Russell King - ARM Linux
• [PATCH] Add missing include of linux/ftrace.h   Jamie Iles
• [PATCH] Add missing include of linux/ftrace.h   Russell King - ARM Linux
• [PATCH] Add missing include of linux/ftrace.h   Rabin Vincent
• [PATCH] Add missing include of linux/ftrace.h   Jamie Iles
• [PATCH] Add platform driver support to the CS890x driver   Russell King - ARM Linux
• [PATCH] Add platform driver support to the CS890x driver   Domenico Andreoli
• [PATCH] amba: be more careful in runtime_suspend/resume   Linus Walleij
• [PATCH] amba: be more careful in runtime_suspend/resume   Russell King - ARM Linux
• [PATCH] amba: be more careful in runtime_suspend/resume   Linus Walleij
• [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend   Russell King - ARM Linux
• [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend   Alan Stern
• [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend   Linus Walleij
• [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend   Russell King - ARM Linux
• [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend   Ulf Hansson
• [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend   Ulf Hansson
• [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend   Alan Stern
• [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend   Ulf Hansson
• [PATCH] arch: arm: tegra: Enable headphone detection gpio   Taylor Hutt
• [PATCH] arch: arm: tegra: Enable headphone detection gpio   Stephen Warren
• [PATCH] ARM i.MX avic: add missing include   Sascha Hauer
• [PATCH] ARM imx51: Add Armadeus systems APF51 support   julien.boibessot at free.fr
• [PATCH] ARM imx51: Add Armadeus systems APF51 support   Mark Brown
• [PATCH] ARM imx51: Add Armadeus systems APF51 support   Shawn Guo
• [PATCH] ARM imx51: Add Armadeus systems APF51 support   Julien Boibessot
• [PATCH] arm/dt: Fix ventana SDHCI power-gpios   Stephen Warren
• [PATCH] arm/imx: add missing include of asm/exception.h for avic.c   Shawn Guo
• [PATCH] arm/imx: add missing include of asm/exception.h for avic.c   Uwe Kleine-König
• [PATCH] arm/imx: add missing include of asm/exception.h for avic.c   Arnd Bergmann
• [PATCH] arm/imx: add missing include of asm/exception.h for avic.c   Sascha Hauer
• [PATCH] arm/tegra: Add device-tree support for TrimSlice board   Stephen Warren
• [PATCH] arm/tegra: Add device-tree support for TrimSlice board   Marc Dietrich
• [PATCH] arm/tegra: Add device-tree support for TrimSlice board   Stephen Warren
• [PATCH] arm/tegra: Add device-tree support for TrimSlice board   Thierry Reding
• [PATCH] arm/tegra: Add device-tree support for TrimSlice board   Olof Johansson
• [PATCH] arm/tegra: clk_get should not be fatal   pdeschrijver at nvidia.com
• [PATCH] arm/tegra: clk_get should not be fatal   Joe Perches
• [PATCH] arm/tegra: clk_get should not be fatal   Peter De Schrijver
• [PATCH] arm/tegra: clk_get should not be fatal   Joe Perches
• [PATCH] arm/tegra: Don't create duplicate gpio and pinmux devices   Stephen Warren
• [PATCH] arm/tegra: Don't create duplicate gpio and pinmux devices   Stephen Warren
• [PATCH] arm/tegra: Don't create duplicate gpio and pinmux devices   Olof Johansson
• [PATCH] arm/tegra: Harmony: Configure PMC for low-level interrupts   Stephen Warren
• [PATCH] arm/tegra: Harmony: Configure PMC for low-level interrupts   Olof Johansson
• [PATCH] arm/tegra: Harmony: Configure PMC for low-level interrupts   Olof Johansson
• [PATCH] arm/tegra: pinmux: ioremap registers   Stephen Warren
• [PATCH] arm/tegra: pinmux: ioremap registers   Olof Johansson
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Peter De Schrijver
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Peter De Schrijver
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Stephen Warren
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Peter De Schrijver
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Olof Johansson
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Russell King - ARM Linux
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Stephen Warren
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Arnd Bergmann
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Stephen Warren
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Arnd Bergmann
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Olof Johansson
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Nicolas Pitre
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Olof Johansson
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Olof Johansson
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Nicolas Pitre
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Nicolas Pitre
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Russell King - ARM Linux
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Russell King - ARM Linux
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Nicolas Pitre
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Russell King - ARM Linux
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Nicolas Pitre
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Stephen Warren
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Stephen Warren
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Russell King - ARM Linux
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Russell King - ARM Linux
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Nicolas Pitre
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Nicolas Pitre
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Nicolas Pitre
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Stephen Warren
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Russell King - ARM Linux
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Nicolas Pitre
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Rob Herring
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Nicolas Pitre
• [PATCH] arm/tegra: select AUTO_ZRELADDR by default   Tixy
• [PATCH] arm: Add VIRTUALIZATION configuration menu and virtio options   Russell King - ARM Linux
• [PATCH] arm: Add VIRTUALIZATION configuration menu and virtio options   Pawel Moll
• [PATCH] ARM: at91: Fix USBA gadget registration   Jochen Friedrich
• [PATCH] ARM: at91: Fix USBA gadget registration   Jochen Friedrich
• [PATCH] ARM: at91: Fix USBA gadget registration   Nicolas Ferre
• [PATCH] ARM: cpu topology: fix warning   Vincent Guittot
• [PATCH] ARM: cpu topology: fix warning   Will Deacon
• [PATCH] ARM: CSR: PM: use outer_resume to resume L2 cache   Barry Song
• [PATCH] ARM: davinci: Use CLKDEV_INIT for creating clk_lookup   Padmavathi Venna
• [PATCH] ARM: debug: provide dummy default option for DEBUG_LL UART choice   Marc Zyngier
• [PATCH] ARM: ep93xx: bring back missing <mach/gpio.h>   Mika Westerberg
• [PATCH] ARM: ep93xx: bring back missing <mach/gpio.h>   Linus Walleij
• [PATCH] ARM: ep93xx: bring back missing <mach/gpio.h>   H Hartley Sweeten
• [PATCH] ARM: ep93xx: Use CLKDEV_INIT for creating clk_lookup instance   Padmavathi Venna
• [PATCH] ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board   Sylwester Nawrocki
• [PATCH] ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board   Kukjin Kim
• [PATCH] arm: exynos4: build is failing due to missing SZ_4K definition   Kukjin Kim
• [PATCH] arm: exynos4: build is failing due to missing SZ_4K definition   Angus Ainslie
• [PATCH] ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynos   Kukjin Kim
• [PATCH] ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynos   Kyungmin Park
• [PATCH] ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynos   Arnd Bergmann
• [PATCH] ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynos   Kukjin Kim
• [PATCH] ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynos   Arnd Bergmann
• [PATCH] ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynos   Kukjin Kim
• [PATCH] arm: fix handling of nr_cpus   Mark Salter
• [PATCH] arm: fix handling of nr_cpus   Russell King - ARM Linux
• [PATCH] arm: fix handling of nr_cpus   Mark Salter
• [PATCH] arm: fix handling of nr_cpus   Russell King - ARM Linux
• [PATCH] arm: fix handling of nr_cpus   Mark Salter
• [PATCH] arm: fix handling of nr_cpus   Russell King - ARM Linux
• [PATCH] arm: fix handling of nr_cpus   Mark Salter
• [PATCH] ARM: gic: allow GIC to support non-banked setups   Marc Zyngier
• [PATCH] ARM: gic: fix irq_alloc_descs handling for sparse irq   Rob Herring
• [PATCH] ARM: gic: fix irq_alloc_descs handling for sparse irq   Russell King - ARM Linux
• [PATCH] ARM: gic: fix irq_alloc_descs handling for sparse irq   Rob Herring
• [PATCH] ARM: hw_breakpoint: skip v7-specific reset on v6 cores   Will Deacon
• [PATCH] ARM: imx: Use CLKDEV_INIT for creating clk_lookup instance   Padmavathi Venna
• [PATCH] ARM: kprobes: Fix build error in test code   Jon Medhurst (Tixy)
• [PATCH] ARM: kprobes: only patch instructions on one CPU   Rabin Vincent
• [PATCH] ARM: kprobes: only patch instructions on one CPU   Tixy
• [PATCH] ARM: kprobes: only patch instructions on one CPU   Tixy
• [PATCH] ARM: kprobes: only patch instructions on one CPU   Rabin Vincent
• [PATCH] ARM: kprobes: only patch instructions on one CPU   Tixy
• [PATCH] ARM: kprobes: work around build errors   Arnd Bergmann
• [PATCH] ARM: kprobes: work around build errors   Dr. David Alan Gilbert
• [PATCH] ARM: kprobes: work around build errors   Tixy
• [PATCH] ARM: kprobes: work around build errors   Jon Medhurst (Tixy)
• [PATCH] ARM: localtimer: add header linux/errno.h explicitly   Russell King - ARM Linux
• [PATCH] ARM: lpc32xx: Use CLKDEV_INIT for creating clk_lookup instance   Padmavathi Venna
• [PATCH] ARM: mach-mxs: fix machines' initializers order   Lauri Hintsala
• [PATCH] ARM: mach-mxs: fix machines' initializers order   Uwe Kleine-König
• [PATCH] ARM: mark empty gpio.h files empty   Linus Walleij
• [PATCH] ARM: mark empty gpio.h files empty   Jeff Garzik
• [PATCH] ARM: mark empty gpio.h files empty   Grant Likely
• [PATCH] ARM: mark empty gpio.h files empty   Linus Walleij
• [PATCH] ARM: mm/alignment.c: Fix build error   Fabio Estevam
• [PATCH] ARM: mm/alignment.c: Fix build error   Nicolas Pitre
• [PATCH] ARM: mm: Align bank start to MAX_ORDER_NR_PAGES   Michael Bohan
• [PATCH] arm: mm: Fix infinite looping issue   Girish K S
• [PATCH] arm: mm: Fix infinite looping issue   Girish KS
• [PATCH] arm: mm: Fix infinite looping issue   Girish KS
• [PATCH] arm: mm: Fix infinite looping issue   Hyok S. Choi
• [PATCH] ARM: mmp: map sram as MT_MEMORY rather than MT_DEVICE   Tony Lindgren
• [PATCH] ARM: mutually exclude ZBOOT_ROM and AUTO_ZRELADDR   Olof Johansson
• [PATCH] ARM: mutually exclude ZBOOT_ROM and AUTO_ZRELADDR   Arnd Bergmann
• [PATCH] ARM: mutually exclude ZBOOT_ROM and AUTO_ZRELADDR   Nicolas Pitre
• [PATCH] ARM: mutually exclude ZBOOT_ROM and AUTO_ZRELADDR   Nicolas Pitre
• [PATCH] arm: mx23: add machine_is_stmp_378x()   Wolfram Sang
• [PATCH] arm: mx23: add machine_is_stmp_378x()   Uwe Kleine-König
• [PATCH] ARM: mx31pdk: Add MC13783 RTC support   Fabio Estevam
• [PATCH] ARM: mx31pdk: Add MC13783 RTC support   Uwe Kleine-König
• [PATCH] ARM: mx31pdk: Add MC13783 RTC support   Fabio Estevam
• [PATCH] ARM: mx3: Remove duplicate entries in iomux-mx3.h   Fabio Estevam
• [PATCH] arm: mx3: update defconfig   Wolfram Sang
• [PATCH] ARM: mx5: Use CLKDEV_INIT for creating clk_lookup instance   Padmavathi Venna
• [PATCH] ARM: mx5: Use CLKDEV_INIT for creating clk_lookup instance   Sascha Hauer
• [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Lauri Hintsala
• [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Lauri Hintsala
• [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Uwe Kleine-König
• [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Baruch Siach
• [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Uwe Kleine-König
• [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Baruch Siach
• [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Lauri Hintsala
• [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Uwe Kleine-König
• [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Lauri Hintsala
• [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Baruch Siach
• [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit   Lauri Hintsala
• [PATCH] ARM: mxs: Use CLKDEV_INIT for creating clk_lookup instance   Padmavathi Venna
• [PATCH] ARM: mxs: Use CLKDEV_INIT for creating clk_lookup instance   Tushar Behera
• [PATCH] ARM: OMAP1: Fix warnings about enabling 32 KiHz timer   Tony Lindgren
• [PATCH] ARM: OMAP1: Fix warnings about enabling 32 KiHz timer   Tony Lindgren
• [PATCH] ARM: OMAP2+: dmtimer: Fix warning   Tony Lindgren
• [PATCH] ARM: omap2+: stub out omap*_volt_data   Arnd Bergmann
• [PATCH] ARM: omap2+: stub out omap*_volt_data   Kevin Hilman
• [PATCH] ARM: omap2+: stub out omap*_volt_data   Arnd Bergmann
• [PATCH] ARM: OMAP2: Fix H4 matrix keyboard warning   Tony Lindgren
• [PATCH] ARM: OMAP3: cm-t35: fix mux mode for DSS pins   Igor Grinberg
• [PATCH] ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1   Paul Walmsley
• [PATCH] ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list   Paul Walmsley
• [PATCH] ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list   Tony Lindgren
• [PATCH] ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list   Russell King - ARM Linux
• [PATCH] ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list   Paul Walmsley
• [PATCH] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection   Steve Sakoman
• [PATCH] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection   Paul Walmsley
• [PATCH] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection   Paul Walmsley
• [PATCH] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection   Paul Walmsley
• [PATCH] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection   Paul Walmsley
• [PATCH] ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only   Kevin Hilman
• [PATCH] ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only   Paul Walmsley
• [PATCH] ARM: OMAP: Add support for AM35xx UART4/ttyO3   Kyle Manna
• [PATCH] ARM: OMAP: Fix early init definitions   Kyle Manna
• [PATCH] arm: omap: Fix errors and warnings when building for one board   Russell King - ARM Linux
• [PATCH] arm: omap: Fix errors and warnings when building for one board   Premi, Sanjeev
• [PATCH] arm: omap: Fix errors and warnings when building for one board   Russell King - ARM Linux
• [PATCH] arm: omap: Fix errors and warnings when building for one board   Sanjeev Premi
• [PATCH] ARM: OMAP: omap_device: Add omap_device_{alloc, delete, register}_ss   Ohad Ben-Cohen
• [PATCH] ARM: OMAP: omap_device: Add omap_device_{alloc, delete, register}_ss   Ohad Ben-Cohen
• [PATCH] ARM: OMAP: omap_device: Add omap_device_{alloc, delete, register}_ss   Kevin Hilman
• [PATCH] ARM: OMAP: omap_device: Expose omap_device_{alloc, delete, register}   Ohad Ben-Cohen
• [PATCH] ARM: pl330: Fix a race condition   Javi Merino
• [PATCH] ARM: PM: build sleep/suspend code for idle path also (not only suspend)   Russell King - ARM Linux
• [PATCH] ARM: PM: build sleep/suspend code for idle path also (not only suspend)   Russell King - ARM Linux
• [PATCH] ARM: PM: build sleep/suspend code for idle path also (not only suspend)   Kevin Hilman
• [PATCH] ARM: PM: build sleep/suspend code for idle path also (not only suspend)   Kevin Hilman
• [PATCH] arm: proc-v7: pc phy addresses before disable MMU   Dave Martin
• [PATCH] ARM: pxa/cm-x300: properly set bt_reset pin   Igor Grinberg
• [PATCH] ARM: pxa/cm-x300: properly set bt_reset pin   Igor Grinberg
• [PATCH] ARM: pxa/cm-x300: properly set bt_reset pin   Eric Miao
• [PATCH] ARM: remove bashism in check for multiple zreladdrs   Rabin Vincent
• [PATCH] ARM: remove bashism in check for multiple zreladdrs   Sascha Hauer
• [PATCH] ARM: remove NR_IRQS dependency for ARM-specific HARDIRQ_BITS definition   Nicolas Pitre
• [PATCH] ARM: remove NR_IRQS dependency for ARM-specific HARDIRQ_BITS definition   Kevin Hilman
• [PATCH] ARM: remove NR_IRQS dependency for ARM-specific HARDIRQ_BITS definition   Kevin Hilman
• [PATCH] ARM: S3C2410: Remove section mismatch warning   Tushar Behera
• [PATCH] ARM: S3C2410: Remove section mismatch warning   Russell King - ARM Linux
• [PATCH] ARM: S3C2410: Remove section mismatch warning   Tushar Behera
• [PATCH] ARM: S3C2443: Remove redundant s3c_register_clocks call for init_clocks   Kukjin Kim
• [PATCH] ARM: S3C64XX: Enable TCM support   Mark Brown
• [PATCH] ARM: S3C64XX: Enable TCM support   Linus Walleij
• [PATCH] ARM: S3C64XX: Enable TCM support   Mark Brown
• [PATCH] ARM: S3C64XX: Enable TCM support   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Add clk enable/disable of pwm   Joonyoung Shim
• [PATCH] ARM: SAMSUNG: Fix compile error due to kfree   jhbird.choi at gmail.com
• [PATCH] ARM: Samsung: Move fimc plat. device from board files to plat-samsung   Sylwester Nawrocki
• [PATCH] ARM: Samsung: Move fimc plat. device from board files to plat-samsung   Kukjin Kim
• [PATCH] ARM: SAMSUNG: s3c-dma-ops needs export.h for EXPORT_SYMBOL   Axel Lin
• [PATCH] ARM: SAMSUNG: s3c-dma-ops needs export.h for EXPORT_SYMBOL   Kukjin Kim
• [PATCH] ARM: SAMSUNG: s3c-dma-ops needs export.h for EXPORT_SYMBOL   Kukjin Kim
• [PATCH] ARM: SAMSUNG: s3c-dma-ops needs export.h for EXPORT_SYMBOL   Axel Lin
• [PATCH] ARM: SAMSUNG: s3c-dma-ops needs export.h for EXPORT_SYMBOL   Paul Gortmaker
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Kukjin Kim
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Thomas Gleixner
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Amit Kachhap
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Kukjin Kim
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Dima Zavin
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Dima Zavin
• [PATCH] ARM: tcc8k: Use CLKDEV_INIT for creating clk_lookup instance   Padmavathi Venna
• [PATCH] ARM: tegra: Add sound support to tegra_defconfig   Stephen Warren
• [PATCH] ARM: tegra: fix compilation error due to mach/hardware.h removal   Olof Johansson
• [PATCH] ARM: tegra: fix compilation error due to mach/hardware.h removal   Sergei Shtylyov
• [PATCH] ARM: tegra: Make earlyprintk choose a UART at runtime.   Doug Anderson
• [PATCH] ARM: tegra: update defconfig   Olof Johansson
• [PATCH] ARM: tegra: update defconfig   Stephen Warren
• [PATCH] ARM: tegra: update defconfig   Stephen Warren
• [PATCH] ARM: tegra: update defconfig   Olof Johansson
• [PATCH] ARM: tegra: update defconfig   Olof Johansson
• [PATCH] ARM: ux500: Add device sdi1 for SDIO   Stefan Nilsson XK
• [PATCH] ARM: zImage: Use $(CROSS_COMPILE)size to get .bss size   Thomas Weber
• [PATCH] ARM: zImage: Use $(CROSS_COMPILE)size to get .bss size   Nicolas Pitre
• [PATCH] ARM: zImage: Use $(CROSS_COMPILE)size to get .bss size   Tony Lindgren
• [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers   Mike Frysinger
• [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers   Russell King - ARM Linux
• [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers   Mike Frysinger
• [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers   Russell King - ARM Linux
• [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers   Russell King - ARM Linux
• [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers   Mike Frysinger
• [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers   Russell King - ARM Linux
• [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers   Linus Walleij
• [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers   Mike Frysinger
• [PATCH] at91/yl-9200: Fix section mismatch   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] AT91: Add a driver for the ADC   Maxime Ripard
• [PATCH] AT91: Add external RTC for Flexibity board   Russell King - ARM Linux
• [PATCH] AT91: Add external RTC for Flexibity board   Maxim Osipov
• [PATCH] AT91: Add external RTC for Flexibity board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ATMEL USB: pass unknown FEATURE SET requests to gadget   Sven Schnelle
• [PATCH] atmel_lcdfb: support 16bit BGR:565 mode, remove unsupported 15bit modes   Peter Korsgaard
• [PATCH] atmel_lcdfb: support new-style palette format   Peter Korsgaard
• [PATCH] atmel_lcdfb: support new-style palette format   Peter Korsgaard
• [PATCH] clk: add definition of HAVE_CLK_PREPARE in Kconfig   Domenico Andreoli
• [PATCH] clocksource: fixup ux500 build problems   Linus Walleij
• [PATCH] CPUIdle: Reevaluate C-states under CPU load to favor deeper C-states   Kevin Hilman
• [PATCH] davinci: mark GPIO implementation complex   Linus Walleij
• [PATCH] DaVinci: only poll EPCPR on DM644x and DM355   Nori, Sekhar
• [PATCH] DaVinci: only poll EPCPR on DM644x and DM355   Sergei Shtylyov
• [PATCH] DaVinci: only poll EPCPR on DM644x and DM355   Nori, Sekhar
• [PATCH] DaVinci: only poll EPCPR on DM644x and DM355   Sergei Shtylyov
• [PATCH] drivers/i2c/busses/i2c-at91.c: fix brokeness   Voss, Nikolaus
• [PATCH] drivers: create a pin control subsystem v8   Linus Walleij
• [PATCH] drivers: create a pin control subsystem v8   Grant Likely
• [PATCH] drivers: create a pin control subsystem v8   Mike Frysinger
• [PATCH] drivers: create a pin control subsystem v8   Linus Walleij
• [PATCH] drivers: create a pin control subsystem v8   Grant Likely
• [PATCH] drivers: create a pin control subsystem v8   Linus Walleij
• [PATCH] drivers: create a pin control subsystem v8   Mike Frysinger
• [PATCH] drivers: create a pin control subsystem v8   Mike Frysinger
• [PATCH] drivers: create a pin control subsystem v8   Grant Likely
• [PATCH] drivers: create a pin control subsystem v8   Linus Walleij
• [PATCH] drivers: create a pin control subsystem v8   Tony Lindgren
• [PATCH] drivers: create a pin control subsystem v8   Grant Likely
• [PATCH] drivers: create a pin control subsystem v8   Mark Brown
• [PATCH] dt: add empty of_alias_get_id() for non-dt builds   Nicolas Ferre
• [PATCH] dt: add empty of_alias_get_id() for non-dt builds   Rob Herring
• [PATCH] dt: add empty of_alias_get_id() for non-dt builds   Grant Likely
• [PATCH] dt: Add empty of_match_node() macro   Nicolas Ferre
• [PATCH] dt: Add empty of_match_node() macro   Grant Likely
• [PATCH] dt: Add empty of_match_node() macro   Grant Likely
• [PATCH] fix ehci alignment error   Harro Haan
• [PATCH] fix ehci alignment error   Greg KH
• [PATCH] fix ehci alignment error   Alan Stern
• [PATCH] fix ehci alignment error   Måns Rullgård
• [PATCH] fix ehci alignment error   Greg KH
• [PATCH] fix ehci alignment error   Mikael Pettersson
• [PATCH] fix ehci alignment error   Greg KH
• [PATCH] fix ehci alignment error   Måns Rullgård
• [PATCH] Fix s3c24xx build error if !CONFIG_PM   Domenico Andreoli
• [PATCH] Fix s3c24xx build error if !CONFIG_PM   Kukjin Kim
• [PATCH] fixup: mm: alloc_contig_range: increase min_free_kbytes during allocation   Maxime Coquelin
• [PATCH] fixup: mm: alloc_contig_range: increase min_free_kbytes during allocation   Marek Szyprowski
• [PATCH] gpio/samsung: Complain loudly if we don't know the SoC   Mark Brown
• [PATCH] gpio/samsung: Complain loudly if we don't know the SoC   Grant Likely
• [PATCH] gpio/samsung: Complain loudly if we don't know the SoC   Mark Brown
• [PATCH] gpio: exynos4: Add device tree support   Thomas Abraham
• [PATCH] gpio: exynos4: Add device tree support   Rob Herring
• [PATCH] gpio: exynos4: Add device tree support   Thomas Abraham
• [PATCH] gpio: exynos4: Add device tree support   Rob Herring
• [PATCH] gpio: exynos4: Add device tree support   Thomas Abraham
• [PATCH] gpio: exynos4: Add device tree support   Kukjin Kim
• [PATCH] gpio: exynos4: Add device tree support   Rob Herring
• [PATCH] gpio: exynos4: Add device tree support   Thomas Abraham
• [PATCH] gpio: exynos4: Add device tree support   Grant Likely
• [PATCH] gpio: exynos4: Add device tree support   Grant Likely
• [PATCH] gpio: exynos4: Add device tree support   Thomas Abraham
• [PATCH] gpio: fix a build failure on KS8695 GPIO   Linus Walleij
• [PATCH] gpio: fix a build failure on KS8695 GPIO   Mike Frysinger
• [PATCH] gpio: pl061: add DT binding support   Grant Likely
• [PATCH] gpio: pl061: add DT binding support   Rob Herring
• [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h   Mark Brown
• [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h   Grant Likely
• [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h   Mark Brown
• [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h   Mike Frysinger
• [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h   Mark Brown
• [PATCH] hvc_dcc: Fix duplicate character inputs   Stephen Boyd
• [PATCH] i2c-gpio.c: correct logic of pdata->scl_is_open_drain   Voss, Nikolaus
• [PATCH] i2c-gpio.c: correct logic of pdata->scl_is_open_drain   Håvard Skinnemoen
• [PATCH] imx: add polled io uart methods   Saleem Abdulrasool
• [PATCH] imx: add polled io uart methods   Saleem Abdulrasool
• [PATCH] imx: add polled io uart methods   Fabio Estevam
• [PATCH] imx: add polled io uart methods   Sascha Hauer
• [PATCH] imx: add polled io uart methods   Uwe Kleine-König
• [PATCH] imx: add polled io uart methods   Saleem Abdulrasool
• [PATCH] iommu/core: fix build issue   Ohad Ben-Cohen
• [PATCH] iommu/core: split mapping to page sizes as supported   Ohad Ben-Cohen
• [PATCH] iomux-mx25: configuration to support CSPI3 on CSI pins   Paul Fertser
• [PATCH] leds-class: change back LEDS_CLASS to tristate instead of bool   Anton Vorontsov
• [PATCH] lib: devres: add convenience function to remap a resource   Wolfram Sang
• [PATCH] lib: devres: add convenience function to remap a resource   Tejun Heo
• [PATCH] lib: devres: add convenience function to remap a resource   Greg KH
• [PATCH] lib: devres: add convenience function to remap a resource   Grant Likely
• [PATCH] mach-integrator: remove VGA_CONSOLE from defconfig   Linus Walleij
• [PATCH] mach-ixp4xx: made gpio functions atomic   Frans Meulenbroeks
• [PATCH] mach-ixp4xx: made gpio functions atomic   Russell King - ARM Linux
• [PATCH] mach-ixp4xx: made gpio functions atomic   Russell King - ARM Linux
• [PATCH] mach-kirkwood: Add support for D-Link DNS-325   Jamie Lentin
• [PATCH] MAINTAINERS: add ARM/FREESCALE IMX6 entry   Shawn Guo
• [PATCH] MAINTAINERS: add ARM/FREESCALE MXS entry   Shawn Guo
• [PATCH] MAINTAINERS: Update tegra maintainer information   Olof Johansson
• [PATCH] MAINTAINERS: Update tegra maintainer information   Colin Cross
• [PATCH] MAINTAINERS: Update tegra maintainer information   Stephen Warren
• [PATCH] MAINTAINERS: Update tegra maintainer information   Grant Likely
• [PATCH] MANITAINERS: Add Cragganmore reference platform to Wolfson support   Mark Brown
• [PATCH] max8997_charger: Fix unsigned value for less than zero   jhbird.choi at gmail.com
• [PATCH] mmc: mmci: Do not release spinlock in request_end   Ulf Hansson
• [PATCH] mmc: mmci: Do not release spinlock in request_end   Linus Walleij
• [PATCH] mmc: mmci: Do not release spinlock in request_end   Adrian Hunter
• [PATCH] mmc: mmci: Do not release spinlock in request_end   Russell King - ARM Linux
• [PATCH] mmc: mmci: Do not release spinlock in request_end   Jon Medhurst (Tixy)
• [PATCH] mmc: mmci: Do not release spinlock in request_end   Ulf Hansson
• [PATCH] mmc: mmci: Do not release spinlock in request_end   Russell King - ARM Linux
• [PATCH] mmc: mmci: Do not release spinlock in request_end   Ulf Hansson
• [PATCH] mmc: mmci: Do not release spinlock in request_end   Russell King - ARM Linux
• [PATCH] mmc: mmci: Do not release spinlock in request_end   Ulf Hansson
• [PATCH] mmc: mmci: Do not release spinlock in request_end   Linus Walleij
• [PATCH] mmc: mmci: Fix PIO read for small SDIO packets   Stefan Nilsson XK
• [PATCH] mmc: mmci: Improve runtime PM support   Ulf Hansson
• [PATCH] mmc: mmci: Improve runtime PM support   Russell King - ARM Linux
• [PATCH] mmc: mmci: Improve runtime PM support   Sebastian Rasmussen
• [PATCH] mmc: mmci: Improve runtime PM support   Ulf Hansson
• [PATCH] mmc: mmci: Improve runtime PM support   Russell King - ARM Linux
• [PATCH] mmc: mmci: Improve runtime PM support   Sebastian Rasmussen
• [PATCH] mmc: mmci: Improve runtime PM support   Linus Walleij
• [PATCH] mmc: mmci: Improve runtime PM support   Ulf Hansson
• [PATCH] mmc: mmci: Improve runtime PM support   Russell King - ARM Linux
• [PATCH] mmc: mmci: Improve runtime PM support   Russell King - ARM Linux
• [PATCH] mmc: mmci: Improve runtime PM support   Linus Walleij
• [PATCH] mmc: mmci: Improve runtime PM support   Russell King - ARM Linux
• [PATCH] mmc: mmci: Improve runtime PM support   Ulf Hansson
• [PATCH] mmc: mmci: Improve runtime PM support   Russell King - ARM Linux
• [PATCH] mmc: mmci: Improve runtime PM support   Ulf Hansson
• [PATCH] mmc: mmci: Improve runtime PM support   Ulf Hansson
• [PATCH] mmc: mmci: Improve runtime PM support   Linus Walleij
• [PATCH] mmc: mmci: Improve runtime PM support   Linus Walleij
• [PATCH] mmc: mmci: Improve runtime PM support   Ulf Hansson
• [PATCH] mmc: mmci: Improve runtime PM support   Ulf Hansson
• [PATCH] mmc: mmci: Improve runtime PM support   Linus Walleij
• [PATCH] mmc: mmci: Improve runtime PM support   Ulf Hansson
• [PATCH] mmc: mmci: Improve runtime PM support   Adrian Hunter
• [PATCH] mmc: mmci: Improve runtime PM support   Linus Walleij
• [PATCH] mx5: modify pm and idle   Shawn Guo
• [PATCH] mx5: modify pm and idle   Sascha Hauer
• [PATCH] mx5: modify pm and idle   Hui Wang
• [PATCH] mx5: modify pm and idle   Hui Wang
• [PATCH] mx5: modify pm and idle   Shawn Guo
• [PATCH] of: Add a reg-names property to name reg entries   Benoit Cousson
• [PATCH] of: Add a reg-names property to name reg entries   Grant Likely
• [PATCH] of: Add a reg-names property to name reg entries   Cousson, Benoit
• [PATCH] of: Add a reg-names property to name reg entries   Grant Likely
• [PATCH] of: Add a reg-names property to name reg entries   Tony Lindgren
• [PATCH] of: Add a reg-names property to name reg entries   Segher Boessenkool
• [PATCH] of: Add a reg-names property to name reg entries   Cousson, Benoit
• [PATCH] of: Add a reg-names property to name reg entries   Segher Boessenkool
• [PATCH] of: Add a reg-names property to name reg entries   Cousson, Benoit
• [PATCH] of: Add a reg-names property to name reg entries   Segher Boessenkool
• [PATCH] of: Add a reg-names property to name reg entries   Tony Lindgren
• [PATCH] of: Add a reg-names property to name reg entries   Cousson, Benoit
• [PATCH] OMAP2+: clock: use clock's recalc in DPLL handling   Paul Walmsley
• [PATCH] OMAP2+: clock: use clock's recalc in DPLL handling   Turquette, Mike
• [PATCH] OMAP2: Devkit8000: Remove double omap_mux_init_gpio   Tony Lindgren
• [PATCH] omap: dmtimer: convert printk to pr_*   Víctor Manuel Jáquez Leal
• [PATCH] omap: dmtimer: convert printk to pr_*   Joe Perches
• [PATCH] omap: dmtimer: convert printk to pr_*   Víctor M. Jáquez L.
• [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache   C.A, Subramaniam
• [PATCH] picoxcell: add a definition of VMALLOC_END   Jamie Iles
• [PATCH] picoxcell: add a definition of VMALLOC_END   Jamie Iles
• [PATCH] pinctrl: Fix "warning: 'struct pinctrl_dev' declared inside parameter list"   Linus Walleij
• [PATCH] pinctrl: Fix "warning: 'struct pinctrl_dev' declared inside parameter list"   Barry Song
• [PATCH] PM / Clocks: Remove redundant NULL checks before kfree()   jhbird.choi at samsung.com
• [PATCH] PM: HIBERNATION: add resume_delay kernel param as well as resume_delay   Borislav Petkov
• [PATCH] PM: HIBERNATION: add resume_delay kernel param as well as resume_delay   Borislav Petkov
• [PATCH] PM: HIBERNATION: add resume_delay kernel param as well as resume_delay   Pavel Machek
• [PATCH] PM: HIBERNATION: add resume_delay kernel param as well as resume_delay   Barry Song
• [PATCH] PM: HIBERNATION: add resume_delay kernel param as well as resume_delay   Barry Song
• [PATCH] PM: HIBERNATION: add resume_delay kernel param as well as resume_delay   Rafael J. Wysocki
• [PATCH] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file   Rafael J. Wysocki
• [PATCH] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file   Pavel Machek
• [PATCH] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file   Barry Song
• [PATCH] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file   Barry Song
• [PATCH] ramoops appears geared to not support ARM   Marco Stornelli
• [PATCH] ramoops appears geared to not support ARM   Russell King - ARM Linux
• [PATCH] ramoops appears geared to not support ARM   Marco Stornelli
• [PATCH] ramoops appears geared to not support ARM   Russell King - ARM Linux
• [PATCH] ramoops appears geared to not support ARM   Marco Stornelli
• [PATCH] ramoops appears geared to not support ARM   Russell King - ARM Linux
• [PATCH] regulator: max8649 Convert max8649 to user regmap api   jhbird.choi at samsung.com
• [PATCH] regulator: max8649 Convert max8649 to user regmap api   Haojian Zhuang
• [PATCH] regulator: max8649 Convert max8649 to user regmap api   Mark Brown
• [PATCH] regulator: Use regmap_read/write(), regmap_update_bits functions directly   jhbird.choi at samsung.com
• [PATCH] regulator: Use regmap_read/write(), regmap_update_bits functions directly   Mark Brown
• [PATCH] regulator: Use regmap_read/write(), regmap_update_bits functions directly   Grant Likely
• [PATCH] regulator: Use regmap_read/write(), regmap_update_bits functions directly   Mark Brown
• [PATCH] rtc: rtc-s3c: Add device tree support   Thomas Abraham
• [PATCH] rtc: rtc-s3c: Add device tree support   Kukjin Kim
• [PATCH] rtc: rtc-s3c: Add device tree support   Grant Likely
• [PATCH] rtc: rtc-s3c: Add device tree support   Kukjin Kim
• [PATCH] s3c2410: remove __ioaddrc()   Cesar Eduardo Barros
• [PATCH] s3c2410: remove __ioaddrc()   Russell King - ARM Linux
• [PATCH] S3C2443: Add devname for hsmmc1 pclk   Kukjin Kim
• [PATCH] sam9g20ek/9m10g45ek/stam9g20: unbreak build after 'use -EINVAL for invalid gpio'   Nicolas Ferre
• [PATCH] SAMSUNG: S3C64XX: Fix SoC identification for S3C64xx devices   Kukjin Kim
• [PATCH] SAMSUNG: S3C64XX: Fix SoC identification for S3C64xx devices   Mark Brown
• [PATCH] Shrink thread_info a bit   Russell King - ARM Linux
• [PATCH] Shrink thread_info a bit   Baruch Siach
• [PATCH] Shrink thread_info a bit   Russell King - ARM Linux
• [PATCH] Shrink thread_info a bit   Will Deacon
• [PATCH] Shrink thread_info a bit   Russell King - ARM Linux
• [PATCH] Shrink thread_info a bit   Tim Bird
• [PATCH] Shrink thread_info a bit   Dave Martin
• [PATCH] Shrink thread_info a bit   Will Deacon
• [PATCH] spi/pl022: Enable clock in probe an use runtime_idle   Ulf Hansson
• [PATCH] spi/pl022: Enable clock in probe an use runtime_idle   Linus Walleij
• [PATCH] spi/pl022: Enable clock in probe an use runtime_idle   Ulf Hansson
• [PATCH] spi/pl022: Enable clock in probe an use runtime_idle   Grant Likely
• [PATCH] spi/pl022: Enable clock in probe an use runtime_idle   Russell King - ARM Linux
• [PATCH] spi/pl022: Enable clock in probe an use runtime_idle   Linus Walleij
• [PATCH] tty/serial: atmel_serial: bootconsole removed from auto-enumerates   Nicolas Ferre
• [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Barry Song
• [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Alan Cox
• [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Barry Song
• [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Alan Cox
• [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Barry Song
• [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Barry Song
• [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Baruch Siach
• [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Barry Song
• [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP   Pandita, Vikram
• [PATCH] usb: musb: OMAP4430: Remove a redundant omap4430_phy_init call in usb_musb_init   Tony Lindgren
• [PATCH] virtio: Add platform bus driver for memory mapped virtio device   Pawel Moll
• [PATCH] virtio: Add platform bus driver for memory mapped virtio device   Pawel Moll
• [PATCH] virtio: Add platform bus driver for memory mapped virtio device   Rusty Russell
• [PATCH] virtio: Add platform bus driver for memory mapped virtio device   Rusty Russell
• [PATCH] virtio: Add platform bus driver for memory mapped virtio device   Michael S. Tsirkin
• [PATCHv16 0/9] Contiguous Memory Allocator   Marek Szyprowski
• [PATCHv16 0/9] Contiguous Memory Allocator   Arnd Bergmann
• [PATCHv16 0/9] Contiguous Memory Allocator   Andrew Morton
• [PATCHv16 0/9] Contiguous Memory Allocator   Marek Szyprowski
• [PATCHv16 0/9] Contiguous Memory Allocator   Arnd Bergmann
• [PATCHv16 0/9] Contiguous Memory Allocator   Andrew Morton
• [PATCHv16 0/9] Contiguous Memory Allocator   Arnd Bergmann
• [PATCHv2 0/2] Update MSM DEBUG_LL support   Stephen Boyd
• [PATCHv2 0/7]ARM: OMAP3PLUS PM: Add IO DaisyChain support via hwmod mux   Vishwanath BS
• [PATCHv2 1/2] msm: Consolidate and move DEBUG_LL to generic ARM Kconfig   Stephen Boyd
• [PATCHv2 1/7] ARM: OMAP3 PM: correct enable/disable of daisy io chain   Vishwanath BS
• [PATCHv2 2/2] msm: Support DEBUG_LL on MSM8660 and MSM8960   Stephen Boyd
• [PATCHv2 2/2] msm: Support DEBUG_LL on MSM8660 and MSM8960   Nicolas Pitre
• [PATCHv2 2/7] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file   Vishwanath BS
• [PATCHv2 3/7] ARM: OMAP4 PM: Add IO Daisychain support   Vishwanath BS
• [PATCHv2 4/7] ARM: OMAP3 PM: Enable IO Wake up   Vishwanath BS
• [PATCHv2 5/7] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux   Vishwanath BS
• [PATCHv2 6/7] ARM: OMAP3 PM: Remove IO Daisychain control from cpuidle   Vishwanath BS
• [PATCHv2 7/7] ARM: OMAP3 PM: Enable IO Daisychain for supported chips   Vishwanath BS
• [PATCHv2] arm/tegra: clk_get should not be fatal   pdeschrijver at nvidia.com
• [PATCHv2] arm/tegra: clk_get should not be fatal   Stephen Warren
• [PATCHv2] ARM: zImage: Use $(CROSS_COMPILE)size to get .bss size   Thomas Weber
• [PATCHv2] ARM: zImage: Use $(CROSS_COMPILE)size to get .bss size   Russell King - ARM Linux
• [PATCHv2] ARM: zImage: Use $(CROSS_COMPILE)size to get .bss size   Nicolas Pitre
• [PATCHv2] atmel_lcdfb: support new-style palette format   Peter Korsgaard
• [PATCHv2] hw_random: add driver for atmel true hardware random number generator   Baruch Siach
• [PATCHv2] hw_random: add driver for atmel true hardware random number generator   Peter Korsgaard
• [PATCHv2] hw_random: add driver for atmel true hardware random number generator   Baruch Siach
• [PATCHv2] hw_random: add driver for atmel true hardware random number generator   Jamie Iles
• [PATCHv2] hw_random: add driver for atmel true hardware random number generator   Nicolas Ferre
• [PATCHv2] hw_random: add driver for atmel true hardware random number generator   Herbert Xu
• [PATCHv2] hw_random: add driver for atmel true hardware random number generator   Peter Korsgaard
• [PATCHv2] msm: boards: Fix fallout from removal of machine_desc in fixup   Russell King - ARM Linux
• [PATCHv2] msm: boards: Fix fallout from removal of machine_desc in fixup   David Brown
• [PATCHv2] msm: boards: Fix fallout from removal of machine_desc in fixup   David Brown
• [PATCHv2] msm: boards: Fix fallout from removal of machine_desc in fixup   Stephen Boyd
• [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod   Paul Walmsley
• [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod   Cousson, Benoit
• [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod   Paul Walmsley
• [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod   Paul Walmsley
• [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod   Cousson, Benoit
• [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod   Paul Walmsley
• [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod   Paul Walmsley
• [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod   Cousson, Benoit
• [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod   Cousson, Benoit
• [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod   Paul Walmsley
• [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod   Paul Walmsley
• [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod   Cousson, Benoit
• [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod   Cousson, Benoit
• [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod   Tero Kristo
• [PULL] Devicetree for 3.2   Rob Herring
• [PULL] Devicetree for 3.2   Grant Likely
• [PULL] i.MX   Sascha Hauer
• [PULL] i.MX   Arnd Bergmann
• [PULL] i.MX   Sascha Hauer
• [PULL] i.MX   Arnd Bergmann
• [PULL] i.MX   Sascha Hauer
• [PULL] i.MX   Uwe Kleine-König
• [RESEND PATCH] PM / Clocks: Remove redundant NULL checks before kfree()   jhbird.choi at samsung.com
• [RESEND PATCH] PM / Clocks: Remove redundant NULL checks before kfree()   Rafael J. Wysocki
• [RESEND][PATCH V2 0/2] Add a common macro for creating struct clk_lookup entries   Padmavathi Venna
• [RESEND][PATCH V2 0/2] Add a common macro for creating struct clk_lookup entries   Kukjin Kim
• [RESEND][PATCH V2 0/2] Add a common macro for creating struct clk_lookup entries   Russell King - ARM Linux
• [RESEND][PATCH V2 1/2] ARM: CLKDEV: Add Common Macro for clk_lookup   Russell King - ARM Linux
• [RESEND][PATCH V2 1/2] ARM: CLKDEV: Add Common Macro for clk_lookup   Padmavathi Venna
• [RESEND][PATCH V2 2/2] ARM: Using CLKDEV_INIT for creating clk_lookup instance   Padmavathi Venna
• [RESEND][PATCH v4 2/3] at91: add parameters for at91_add_device_isi function   Josh Wu
• [RESEND][PATCH v4 3/3] at91: add Atmel ISI and ov2640 support on sam9m10/sam9g45 board   Josh Wu
• [RESEND][PATCH] PM / Clocks: Remove redundant NULL checks before kfree   jhbird.choi at gmail.com
• [RFC 0/2] Introduce dma buffer sharing mechanism   Sumit Semwal
• [RFC 0/4] simplify remapping a resource for drivers   Wolfram Sang
• [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Tomasz Stanislawski
• [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Sumit Semwal
• [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Rob Clark
• [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Daniel Vetter
• [RFC 1/4] Documentation: devres: add allocation functions to list of supported calls   Tejun Heo
• [RFC 1/5] ARM: dev_archdata: add private iommu extension   Ohad Ben-Cohen
• [RFC 1/5] ARM: dev_archdata: add private iommu extension   Ohad Ben-Cohen
• [RFC 1/5] ARM: dev_archdata: add private iommu extension   Ohad Ben-Cohen
• [RFC 1/5] ARM: dev_archdata: add private iommu extension   Russell King - ARM Linux
• [RFC 1/5] ARM: dev_archdata: add private iommu extension   Ohad Ben-Cohen
• [RFC 2/2] dma-buf: Documentation for buffer sharing framework   Randy Dunlap
• [RFC 2/2] dma-buf: Documentation for buffer sharing framework   Semwal, Sumit
• [RFC 2/5] ARM: OMAP: omap_device: add a method to set iommu private archdata   Kevin Hilman
• [RFC 2/5] ARM: OMAP: omap_device: add a method to set iommu private archdata   Ohad Ben-Cohen
• [RFC 2/5] ARM: OMAP: omap_device: add a method to set iommu private archdata   Kevin Hilman
• [RFC 2/5] ARM: OMAP: omap_device: add a method to set iommu private archdata   Cousson, Benoit
• [RFC 2/5] ARM: OMAP: omap_device: add a method to set iommu private archdata   Ohad Ben-Cohen
• [RFC 3/4] lib: devres: add convenience function to remap a resource   Grant Likely
• [RFC 3/4] lib: devres: add convenience function to remap a resource   Tejun Heo
• [RFC 3/4] lib: devres: add convenience function to remap a resource   Tejun Heo
• [RFC 3/4] lib: devres: add convenience function to remap a resource   Wolfram Sang
• [RFC 3/4] lib: devres: add convenience function to remap a resource   Tejun Heo
• [RFC 4/4] watchdog: imx2: simplify resource allocation   Grant Likely
• [RFC PATCH 0/3] ARM: amba: defining module aliases for AMBA driver autoloading   Russell King - ARM Linux
• [RFC PATCH 0/3] ARM: amba: defining module aliases for AMBA driver autoloading   Dave Martin
• [RFC PATCH 0/5] Rework of the TI81xx PRCM support   Paul Walmsley
• [RFC PATCH 01/15] ARM: uncompress.h: Remove unused arch_decomp_wdog defines   Zoltan Devai
• [RFC PATCH 01/17] et1011c: Replaced PHY driver by a small dm646x board fixup   Kyle Moffett
• [RFC PATCH 02/15] ARM: uncompress: Remove unused definition of ARCH_HAS_DECOMP_WATCHDOG   Zoltan Devai
• [RFC PATCH 03/15] ARM: uncompress.h: Introduce ARCH_HAVE_DECOMP_SETUP   Zoltan Devai
• [RFC PATCH 04/15] ARM: uncompress: Only call arch_decomp_setup when needed   Uwe Kleine-König
• [RFC PATCH 04/15] ARM: uncompress: Only call arch_decomp_setup when needed   Zoltan Devai
• [RFC PATCH 05/15] ARM: uncompress.h: Remove unused arch_decomp_setup declarations   Zoltan Devai
• [RFC PATCH 06/15] ARM: uncompress: Remove unused Trace functions   Zoltan Devai
• [RFC PATCH 07/15] ARM: uncompress: Move decompressing related stuff to decompress.c   Russell King - ARM Linux
• [RFC PATCH 07/15] ARM: uncompress: Move decompressing related stuff to decompress.c   Russell King - ARM Linux
• [RFC PATCH 07/15] ARM: uncompress: Move decompressing related stuff to decompress.c   Zoltan Devai
• [RFC PATCH 08/15] ARM: uncompress: Rename misc.c to print.c   Zoltan Devai
• [RFC PATCH 08/15] ARM: uncompress: Rename misc.c to print.c   Uwe Kleine-König
• [RFC PATCH 09/15] ARM: uncompress: Introduce ucuart as low-level serial port driver   Russell King - ARM Linux
• [RFC PATCH 09/15] ARM: uncompress: Introduce ucuart as low-level serial port driver   Zoltan Devai
• [RFC PATCH 1/5] ARM: OMAP: TI81XX: prcm: Add module and register offsets   Paul Walmsley
• [RFC PATCH 10/15] ARM: uncompress.h: Convert machines to use the new ucuart driver   Zoltan Devai
• [RFC PATCH 11/15] ARM: uncompress: Call arch_decomp_setup by default   Zoltan Devai
• [RFC PATCH 12/15] ARM: uncompress.h: make the ucuart driver the default implementation   Zoltan Devai
• [RFC PATCH 13/15] ARM: uncompress.h: Cleanup header guards and banners   Russell King - ARM Linux
• [RFC PATCH 13/15] ARM: uncompress.h: Cleanup header guards and banners   Zoltan Devai
• [RFC PATCH 14/15] ARM: uncompress: Get decompress UART info from DT   Russell King - ARM Linux
• [RFC PATCH 14/15] ARM: uncompress: Get decompress UART info from DT   Tony Lindgren
• [RFC PATCH 14/15] ARM: uncompress: Get decompress UART info from DT   Zoltan Devai
• [RFC PATCH 15/15] ARM: uncompress: Add documentation   Zoltan Devai
• [RFC PATCH 2/5] ARM: OMAP: TI81xx: add powerdomain code   Paul Walmsley
• [RFC PATCH 3/5] ARM: OMAP: TI81xx: add powerdomain data   Paul Walmsley
• [RFC PATCH 4/5] ARM: OMAP: TI81xx: add clockdomain control code   Paul Walmsley
• [RFC PATCH 5/5] ARM: OMAP: TI81xx: add clockdomain data   Paul Walmsley
• [RFC PATCH v2 0/6] TI81XX: Add clock and hwmod data   Paul Walmsley
• [RFC PATCH v2 0/6] TI81XX: Add clock and hwmod data   Pedanekar, Hemant
• [RFC PATCH v2 0/6] TI81XX: Add clock and hwmod data   Paul Walmsley
• [RFC PATCH v2 2/6] TI816X: clock: Add clock data   Paul Walmsley
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Kevin Hilman
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   G, Manjunath Kondaiah
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Grant Likely
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Grant Likely
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   G, Manjunath Kondaiah
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Grant Likely
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   G, Manjunath Kondaiah
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Andrew Morton
• [RFC PATCH v3] drivercore: Add driver probe deferral mechanism   Grant Likely
• [RFC PATCH] arm: dma: Drop GFP_COMP for DMA memory allocations   Stephen Warren
• [RFC PATCH] arm: dma: Drop GFP_COMP for DMA memory allocations   Russell King - ARM Linux
• [RFC PATCH] tty/serial: atmel_serial: add device tree support   Nicolas Ferre
• [RFC PATCH] tty/serial: atmel_serial: add device tree support   Rob Herring
• [RFC PATCH] tty/serial: atmel_serial: add device tree support   Nicolas Ferre
• [RFC PATCH] tty/serial: atmel_serial: add device tree support   Rob Herring
• [RFC PATCH] tty/serial: atmel_serial: add device tree support   Grant Likely
• [RFC PATCH] tty/serial: atmel_serial: add device tree support   Grant Likely
• [RFC PATCH] tty/serial: atmel_serial: add device tree support   Nicolas Ferre
• [RFC PATCH] tty/serial: atmel_serial: add device tree support   Nicolas Ferre
• [RFC PATCH] tty/serial: RS485 bindings for device tree   Nicolas Ferre
• [RFC PATCH] tty/serial: RS485 bindings for device tree   Nicolas Ferre
• [RFC PATCH] tty/serial: RS485 bindings for device tree   Arnd Bergmann
• [RFC PATCH] tty/serial: RS485 bindings for device tree   Nicolas Ferre
• [RFC/PATCH 0/7] ARM: ARM11 MPCore preemption/task migration cache coherency fixups   gdavis at mvista.com
• [RFC/PATCH 1/7] ARM: ARM11 MPCore: pgd_alloc is not preempt safe   gdavis at mvista.com
• [RFC/PATCH 1/7] ARM: ARM11 MPCore: pgd_alloc is not preempt safe   Russell King - ARM Linux
• [RFC/PATCH 1/7] ARM: ARM11 MPCore: pgd_alloc is not preempt safe   George G. Davis
• [RFC/PATCH 1/7] ARM: ARM11 MPCore: pgd_alloc is not preempt safe   gdavis at mvista.com
• [RFC/PATCH 2/7] ARM: ARM11 MPCore: pte_alloc_one{, _kernel} are not preempt safe   gdavis at mvista.com
• [RFC/PATCH 2/7] ARM: ARM11 MPCore: pte_alloc_one{, _kernel} are not preempt safe   gdavis at mvista.com
• [RFC/PATCH 2/7] ARM: ARM11 MPCore: pte_alloc_one{, _kernel} are not preempt safe   George G. Davis
• [RFC/PATCH 2/7] ARM: ARM11 MPCore: pte_alloc_one{,_kernel} are not preempt safe   Russell King - ARM Linux
• [RFC/PATCH 3/7] ARM: ARM11 MPCore: {clean, flush}_pmd_entry are not preempt safe   gdavis at mvista.com
• [RFC/PATCH 3/7] ARM: ARM11 MPCore: {clean, flush}_pmd_entry are not preempt safe   gdavis at mvista.com
• [RFC/PATCH 3/7] ARM: ARM11 MPCore: {clean, flush}_pmd_entry are not preempt safe   George G. Davis
• [RFC/PATCH 3/7] ARM: ARM11 MPCore: {clean, flush}_pmd_entry are not preempt safe   George G. Davis
• [RFC/PATCH 3/7] ARM: ARM11 MPCore: {clean,flush}_pmd_entry are not preempt safe   Catalin Marinas
• [RFC/PATCH 3/7] ARM: ARM11 MPCore: {clean,flush}_pmd_entry are not preempt safe   Russell King - ARM Linux
• [RFC/PATCH 4/7] ARM: ARM11 MPCore: clean_dcache_area is not preempt safe   gdavis at mvista.com
• [RFC/PATCH 4/7] ARM: ARM11 MPCore: clean_dcache_area is not preempt safe   gdavis at mvista.com
• [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>   gdavis at mvista.com
• [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>   gdavis at mvista.com
• [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>   Catalin Marinas
• [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>   gdavis at mvista.com
• [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>   Russell King - ARM Linux
• [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>   Catalin Marinas
• [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>   Russell King - ARM Linux
• [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>   George G. Davis
• [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>   George G. Davis
• [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>   George G. Davis
• [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>   Nicolas Pitre
• [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>   George G. Davis
• [RFC/PATCH 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe   Russell King - ARM Linux
• [RFC/PATCH 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe   George G. Davis
• [RFC/PATCH 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe   gdavis at mvista.com
• [RFC/PATCH 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe   gdavis at mvista.com
• [RFC/PATCH 7/7] ARM: ARM11 MPCore: cpu_v6_set_pte_ext is not preempt safe   Russell King - ARM Linux
• [RFC/PATCH 7/7] ARM: ARM11 MPCore: cpu_v6_set_pte_ext is not preempt safe   George G. Davis
• [RFC/PATCH 7/7] ARM: ARM11 MPCore: cpu_v6_set_pte_ext is not preempt safe   gdavis at mvista.com
• [RFC/PATCH 7/7] ARM: ARM11 MPCore: cpu_v6_set_pte_ext is not preempt safe   gdavis at mvista.com
• [RFC/PATCH v2 0/7] ARM11 MPCore: preemption/task migration cache coherency fixups   gdavis at mvista.com
• [RFC/PATCH v3 0/7] ARM11 MPCore: preemption/task migration cache coherency fixups   gdavis at mvista.com
• [RFC/PATCH v3 1/7] ARM: ARM11 MPCore: pgd_alloc is not preempt safe   gdavis at mvista.com
• [RFC/PATCH v3 2/7] ARM: ARM11 MPCore: pte_alloc_one{, _kernel} are not preempt safe   gdavis at mvista.com
• [RFC/PATCH v3 3/7] ARM: ARM11 MPCore: {clean, flush}_pmd_entry are not preempt safe   gdavis at mvista.com
• [RFC/PATCH v3 4/7] ARM: ARM11 MPCore: clean_dcache_area is not preempt safe   gdavis at mvista.com
• [RFC/PATCH v3 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>   gdavis at mvista.com
• [RFC/PATCH v3 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe   gdavis at mvista.com
• [RFC/PATCH v3 7/7] ARM: ARM11 MPCore: cpu_v6_set_pte_ext is not preempt safe   gdavis at mvista.com
• [RFC/PATCH v4 0/7] ARM11 MPCore: preemption/task migration cache coherency fixups   gdavis at mvista.com
• [RFC/PATCH v4 1/7] ARM: ARM11 MPCore: pgd_alloc is not preempt safe   gdavis at mvista.com
• [RFC/PATCH v4 2/7] ARM: ARM11 MPCore: pte_alloc_one{, _kernel} are not preempt safe   gdavis at mvista.com
• [RFC/PATCH v4 3/7] ARM: ARM11 MPCore: {clean, flush}_pmd_entry are not preempt safe   gdavis at mvista.com
• [RFC/PATCH v4 4/7] ARM: ARM11 MPCore: clean_dcache_area is not preempt safe   gdavis at mvista.com
• [RFC/PATCH v4 4/7] ARM: ARM11 MPCore: clean_dcache_area is not preempt safe   Tony Lindgren
• [RFC/PATCH v4 4/7] ARM: ARM11 MPCore: clean_dcache_area is not preempt safe   George G. Davis
• [RFC/PATCH v4 4/7] ARM: ARM11 MPCore: clean_dcache_area is not preempt safe   Tony Lindgren
• [RFC/PATCH v4 4/7] ARM: ARM11 MPCore: clean_dcache_area is not preempt safe   George G. Davis
• [RFC/PATCH v4 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>   gdavis at mvista.com
• [RFC/PATCH v4 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe   Nicolas Pitre
• [RFC/PATCH v4 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe   George G. Davis
• [RFC/PATCH v4 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe   Nicolas Pitre
• [RFC/PATCH v4 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe   gdavis at mvista.com
• [RFC/PATCH v4 7/7] ARM: ARM11 MPCore: cpu_v6_set_pte_ext is not preempt safe   gdavis at mvista.com
• [RFC/PATCH v4 7/7] ARM: ARM11 MPCore: cpu_v6_set_pte_ext is not preempt safe   Nicolas Pitre
• [RFC/PATCH v4 7/7] ARM: ARM11 MPCore: cpu_v6_set_pte_ext is not preempt safe   George G. Davis
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Olof Johansson
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Anton Staaf
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Stephen Warren
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Olof Johansson
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Stephen Warren
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Olof Johansson
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Stephen Warren
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Rob Herring
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Olof Johansson
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Olof Johansson
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Segher Boessenkool
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Rob Herring
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Olof Johansson
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Stephen Warren
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Olof Johansson
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Segher Boessenkool
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Stephen Warren
• [RFC] [PATCH] ARM: tegra: emc: device tree bindings   Olof Johansson
• [RFC] ARM: at91: gpio add mux check   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] ARM: at91: gpio add mux check   Stephen Warren
• [RFC] ARM: at91: gpio add mux check   Linus Walleij
• [RFC] ARM: at91: gpio add mux check   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] ARM: at91: gpio add mux check   Linus Walleij
• [RFC] clocktree representation in the devicetree   Sascha Hauer
• [RFC] clocktree representation in the devicetree   Arnd Bergmann
• [RFC] clocktree representation in the devicetree   Rob Herring
• [RFC] clocktree representation in the devicetree   Sascha Hauer
• [RFC] clocktree representation in the devicetree   Sascha Hauer
• [RFC] clocktree representation in the devicetree   Rob Herring
• [RFC] clocktree representation in the devicetree   Sascha Hauer
• [RFC] clocktree representation in the devicetree   Rob Herring
• [RFC] clocktree representation in the devicetree   Sascha Hauer
• [RFC] DT boot loader best practice   Jean-Christophe PLAGNIOL-VILLARD
• [RFC] Need help deciphering reboot modes!   Will Deacon
• [RFC] Shrink sched_clock some more   Stephen Boyd
• [RFC] Shrink sched_clock some more   Nicolas Pitre
• [RFC][PATCH] Consolidate Samsung MAINTAINERS   Heiko Stübner
• [RFC][PATCH] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired   Baruch Siach
• [RFC][PATCH] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired   Lothar Waßmann
• [RFC][PATCH] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired   Paul Fertser
• [RFC][PATCH] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired   Sascha Hauer
• [RFC][PATCH] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired   Shawn Guo
• [RFC][PATCH] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired   Paul Fertser
• [RFC][PATCH] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired   Sascha Hauer
• [RFC][PATCH] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired   Paul Fertser
• [RFC][PATCH] uncompress.h cleanup and DT support   Zoltan Devai
• [RFC][PATCH] uncompress.h cleanup and DT support   Russell King - ARM Linux
• [RFC][PATCH] uncompress.h cleanup and DT support   Jean-Christophe PLAGNIOL-VILLARD
• [RFC][PATCH] uncompress.h cleanup and DT support   Zoltan Devai
• [RFC][PATCH] uncompress.h cleanup and DT support   Russell King - ARM Linux
• [RFC][PATCH] uncompress.h cleanup and DT support   Uwe Kleine-König
• [RFC][PATCH] uncompress.h cleanup and DT support   Russell King - ARM Linux
• [RFC][PATCH] uncompress.h cleanup and DT support   Zoltan Devai
• [RFC][PATCH] uncompress.h cleanup and DT support   Zoltan Devai
• [RFT/PATCH 1/7] OMAP3+: PM: SR: add suspend/resume handlers   Felipe Balbi
• [RFT/PATCH 2/7] arm: omap: smartreflex: add missing platform_set_drvdata()   Felipe Balbi
• [RFT/PATCH 3/7] arm: omap: smartreflex: use dev_get_drvdata()   Felipe Balbi
• [RFT/PATCH 4/7] arm: omap: smartreflex: move late_initcall() closer to its argument   Felipe Balbi
• [RFT/PATCH 5/7] arm: omap: smartreflex: clean ups all over   Felipe Balbi
• [RFT/PATCH 6/7] arm: omap: smartreflex: fix IRQ handling bug   Felipe Balbi
• [RFT/PATCH 6/7] arm: omap: smartreflex: fix IRQ handling bug   Sergei Shtylyov
• [RFT/PATCH 6/7] arm: omap: smartreflex: fix IRQ handling bug   Felipe Balbi
• [RFT/PATCH 7/7] arm: omap: smartreflex: micro-optimization for sanity check   Sergei Shtylyov
• [RFT/PATCH 7/7] arm: omap: smartreflex: micro-optimization for sanity check   Felipe Balbi
• [RFT/PATCH 7/7] arm: omap: smartreflex: micro-optimization for sanity check   Sergei Shtylyov
• [RFT/PATCH 7/7] arm: omap: smartreflex: micro-optimization for sanity check   Felipe Balbi
• [V2] ARM: mx5: use generic irq chip pm interface for pm functions on   Hui Wang
• acs5k_tiny_defconfig broken by mach-ks8695 GPIO move   Mike Frysinger
• Add support for the SPMP8000 SoC and Letcool board   Zoltan Devai
• Add support for the SPMP8000 SoC and Letcool board   Jamie Iles
• Add support for the SPMP8000 SoC and Letcool board   Zoltan Devai
• Add support for the SPMP8000 SoC and Letcool board   Jamie Iles
• Add support for the SPMP8000 SoC and Letcool board   Arnd Bergmann
• Advertising on your site   Frank Dewitt
• Anyone used KDB single-stepping on ARM   Tim Bird
• ARM SoC tree: OMAP PM dependency on tip irq/core   Rob Herring
• ARM SoC tree: OMAP PM dependency on tip irq/core   Arnd Bergmann
• ARM SoC tree: OMAP PM dependency on tip irq/core   Tony Lindgren
• ARM SoC tree: OMAP PM dependency on tip irq/core   Arnd Bergmann
• ARM SoC tree: OMAP PM dependency on tip irq/core   Kevin Hilman
• ARM SoC tree: OMAP PM dependency on tip irq/core   Arnd Bergmann
• ARM SoC tree: OMAP PM dependency on tip irq/core   Thomas Gleixner
• ARM SoC tree: OMAP PM dependency on tip irq/core   Arnd Bergmann
• ARM: Exynos4: Enable device tree support for GIC controller   Thomas Abraham
• Build error while adding debug LL support for new board   Afzal Mohammed
• Build error while adding debug LL support for new board   Mohammed, Afzal
• Build error while adding debug LL support for new board   Russell King - ARM Linux
• Build error while adding debug LL support for new board   Tony Lindgren
• Build error while adding debug LL support for new board   Russell King - ARM Linux
• Build error while adding debug LL support for new board   Tony Lindgren
• Build error while adding debug LL support for new board   Mohammed, Afzal
• change_page_attr() implementation for ARM?   Krishna Reddy
• change_page_attr() implementation for ARM?   Russell King - ARM Linux
• change_page_attr() implementation for ARM?   Catalin Marinas
• change_page_attr() implementation for ARM?   Catalin Marinas
• CMA v16 and DMA-mapping v13 patch series   Marek Szyprowski
• config ARCH_AT91SAM9X5   Paul Bolle
• config ARCH_AT91SAM9X5   Marc Kleine-Budde
• cpufreq for at91? device tree files   Robert Schwebel
• DEBUG LL: Build error while adding support for new board   Afzal Mohammed
• Getting random Kernel Crash with v3.1-rc8 kernel   Hiremath, Vaibhav
• Getting random Kernel Crash with v3.1-rc8 kernel   Hiremath, Vaibhav
• GIC MULTI_IRQ_HANDLER branches   Marc Zyngier
• GIC MULTI_IRQ_HANDLER branches   Tony Lindgren
• GIC MULTI_IRQ_HANDLER branches   Russell King - ARM Linux
• GIC MULTI_IRQ_HANDLER branches   Tony Lindgren
• Git pull request: mach/vmalloc.h removal, and ioremap optimizations   Nicolas Pitre
• linux-next failure on tegra due to conflicts between PPI and irq domain patches and irq.h->module.h include removal   Rob Herring
• linux-next failure on tegra due to conflicts between PPI and irq domain patches and irq.h->module.h include removal   Paul Gortmaker
• linux-next failure on tegra due to conflicts between PPI and irq domain patches and irq.h->module.h include removal   Paul Gortmaker
• linux-next failure on tegra due to conflicts between PPI and irq domain patches and irq.h->module.h include removal   Olof Johansson
• linux-next failure on tegra due to conflicts between PPI and irq domain patches and irq.h->module.h include removal   Olof Johansson
• linux-next failure on tegra due to conflicts between PPI and irq domain patches and irq.h->module.h include removal   Olof Johansson
• Long stalls during boot with -next   Mark Brown
• Long stalls during boot with -next   Thomas Abraham
• Long stalls during boot with -next   Mark Brown
• Message could not be delivered   linux-arm-kernel at lists.infradead.org
• nr_cpus cmdline parameter not working   Russell King - ARM Linux
• nr_cpus cmdline parameter not working   Mark Salter
• Oops #817 on ARM MPCore with 2.6.22-rc3   shaiju
• orion/kirkwood and device tree   Michael Walle
• orion/kirkwood and device tree   Russell King - ARM Linux
• orion/kirkwood and device tree support   Michael Walle
• orion/kirkwood and device tree support   Jason
• parallel load of modules on an ARM multicore   George G. Davis
• parallel load of modules on an ARM multicore   George G. Davis
• Perf support for OMAP4   Will Deacon
• Perf support for OMAP4   Ming Lei
• pinctrl_config APIs, and other pinmux questions   Stephen Warren
• pinctrl_config APIs, and other pinmux questions   Shawn Guo
• pinctrl_config APIs, and other pinmux questions   Stephen Warren
• pinctrl_config APIs, and other pinmux questions   Shawn Guo
• pinctrl_config APIs, and other pinmux questions   Linus Walleij
• pinctrl_config APIs, and other pinmux questions   Linus Walleij
• pinctrl_config APIs, and other pinmux questions   Stephen Warren
• pinctrl_config APIs, and other pinmux questions   Stephen Warren
• pinctrl_config APIs, and other pinmux questions   Shawn Guo
• pinctrl_config APIs, and other pinmux questions   Linus Walleij
• please add MACH_APF9328 to mach-types   gwenhael.goavec
• Please help with the OMAP static mapping mess   Nicolas Pitre
• Please help with the OMAP static mapping mess   Tony Lindgren
• Please help with the OMAP static mapping mess   Nicolas Pitre
• Please help with the OMAP static mapping mess   Tony Lindgren
• Please help with the OMAP static mapping mess   Nicolas Pitre
• Please help with the OMAP static mapping mess   Russell King - ARM Linux
• Please help with the OMAP static mapping mess   Tony Lindgren
• Please help with the OMAP static mapping mess   Shilimkar, Santosh
• Please help with the OMAP static mapping mess   Santosh Shilimkar
• Please help with the OMAP static mapping mess   Tony Lindgren
• Please help with the OMAP static mapping mess   Nicolas Pitre
• Please help with the OMAP static mapping mess   Nicolas Pitre
• Please help with the OMAP static mapping mess   Russell King - ARM Linux
• Please help with the OMAP static mapping mess   Nicolas Pitre
• Please help with the OMAP static mapping mess   Tony Lindgren
• Please help with the OMAP static mapping mess   Nicolas Pitre
• Please help with the OMAP static mapping mess   Tony Lindgren
• Please help with the OMAP static mapping mess   Rob Herring
• Please help with the OMAP static mapping mess   Nicolas Pitre
• Please help with the OMAP static mapping mess   Santosh Shilimkar
• Please update linux-next url for tegra   Olof Johansson
• Please update linux-next url for tegra   Stephen Rothwell
• Possible regression in kexec on ARM ARMv6 and ARMv7 cores   Simon Horman
• Possible regression in kexec on ARM ARMv6 and ARMv7 cores   Will Deacon
• Possible regression in kexec on ARM ARMv6 and ARMv7 cores   Simon Horman
• Possible regression in kexec on ARM ARMv6 and ARMv7 cores   Simon Horman
• Possible regression in kexec on ARM ARMv6 and ARMv7 cores   Will Deacon
• Possible regression in kexec on ARM ARMv6 and ARMv7 cores   Simon Horman
• Possible regression in kexec on ARM ARMv6 and ARMv7 cores   Will Deacon
• Possible regression in kexec on ARM ARMv6 and ARMv7 cores   Simon Horman
• Pull request: removal of most instances of mach/memory.h   Nicolas Pitre
• Pull request: removal of most instances of mach/memory.h   Nicolas Pitre
• Question about "Inconsistent kallsyms data"   Eric Miao
• Question about "Inconsistent kallsyms data"   Arnd Bergmann
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   David Yang
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   Bryan Wu
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   David Yang
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   David Yang
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   Mohammed, Afzal
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   David Yang
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   David Yang
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   Mohammed, Afzal
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   David Yang
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   David Yang
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   David Yang
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   David Yang
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   David Yang
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   David Yang
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   Russell King - ARM Linux
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   David Yang
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   David Yang
• Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem   David Yang
• Race condition in switch_to() / set_fs()   Alexander Korolkov
• READ THIS: the next mach-types update   Russell King - ARM Linux
• READ THIS: the next mach-types update   Arnd Bergmann
• READ THIS: the next mach-types update   H Hartley Sweeten
• Realtek ALC530 codec driver   卞磊
• Realtek ALC530 codec driver   Uwe Kleine-König
• Realtek ALC530 codec driver   Baruch Siach
• sched: ARM: arch_scale_freq_power   Vincent Guittot
• sched: ARM: arch_scale_freq_power   Amit Kucheria
• sched: ARM: arch_scale_freq_power   Peter Zijlstra
• sched: ARM: arch_scale_freq_power   Vincent Guittot
• sched: ARM: arch_scale_freq_power   Peter Zijlstra
• sched: ARM: arch_scale_freq_power   Amit Kucheria
• sched: ARM: arch_scale_freq_power   Vincent Guittot
• sched: ARM: arch_scale_freq_power   Peter Zijlstra
• sched: ARM: arch_scale_freq_power   Peter Zijlstra
• sched: ARM: arch_scale_freq_power   Vincent Guittot
• sched: ARM: arch_scale_freq_power   Peter Zijlstra
• select consuming too much cpu time when changing from kernel 2.6.29 to 2.6.34   Russell King - ARM Linux
• select consuming too much cpu time when changing from kernel 2.6.29 to 2.6.34   Werner Cornelius
• select consuming too much cpu time when changing from kernel 2.6.29 to 2.6.34   Werner Cornelius
• Serieal console on Samsung S3C6410 ARM11 CPU (Was [ANNOUNCE] 3.0.6-rt17)   Thomas Abraham
• Serieal console on Samsung S3C6410 ARM11 CPU (Was [ANNOUNCE] 3.0.6-rt17)   Juergen Beisert
• Serieal console on Samsung S3C6410 ARM11 CPU (Was [ANNOUNCE] 3.0.6-rt17)   Thomas Abraham
• Serious question: How long does it take to get 64bit into ARM?   Michelle Konzack
• Serious question: How long does it take to get 64bit into ARM?   Russell King - ARM Linux
• Serious question: How long does it take to get 64bit into ARM?   Michelle Konzack
• Serious question: How long does it take to get 64bit into ARM?   Catalin Marinas
• Serious question: How long does it take to get 64bit into ARM?   Michelle Konzack
• Suspicious header   Ruskó Péter
• Suuri Laina tarjous   Oxford Financial Home
• Tegra T20 / T25 datasheet (Technical Reference Manual)   Stephen Warren
• Tegra T20 / T25 datasheet (Technical Reference Manual)   Olof Johansson
• TX28 drivers - Please help   Peter Rusko
• TX28 drivers - Please help   Robert Schwebel
• unwind and lockdep   Harald Gustafsson
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Igor Grinberg
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Catalin Marinas
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Catalin Marinas
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Nicolas Pitre
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Nicolas Pitre
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Catalin Marinas
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Marek Vasut
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Linus Walleij
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Barry Song
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Mark Brown
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Barry Song
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Igor Grinberg
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Igor Grinberg
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Jonathan Cameron
• Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011   Jonathan Cameron
• Warning at kernel/mutex.c   Fabio Estevam
• Warning at kernel/mutex.c   Russell King - ARM Linux
• Warning at kernel/mutex.c   Uwe Kleine-König
• Warning at kernel/mutex.c   Fabio Estevam
• Warning at kernel/mutex.c   Uwe Kleine-König
• Warning at kernel/mutex.c   Fabio Estevam
• Warning at kernel/mutex.c   Sascha Hauer
• Warning at kernel/mutex.c   Uwe Kleine-König
• Warning in -next w/ "ARM: 7011/1: Add ARM cpu topology definition"   Will Deacon
• Warning in -next w/ "ARM: 7011/1: Add ARM cpu topology definition"   Vincent Guittot
• Your email requires verification verify#BnPqIJe51L0EH_wVSi4DF-1318355582)   bhook at pyrogon.com
• 群发软件+买家搜索机+最新广交会买家、海关数据,B2B询盘买家500万。   仅10元每天。