[PATCH v5 03/11] ARM: pxa: rename gpio_to_irq and irq_to_gpio
Haojian Zhuang
haojian.zhuang at marvell.com
Mon Oct 17 09:35:09 EDT 2011
Avoid to define gpio_to_irq() and irq_to_gpio() for potential name
confliction since multiple architecture will be built together.
Signed-off-by: Haojian Zhuang <haojian.zhuang at marvell.com>
---
arch/arm/mach-mmp/aspenite.c | 4 +-
arch/arm/mach-mmp/flint.c | 4 +-
arch/arm/mach-mmp/include/mach/gpio-pxa.h | 1 +
arch/arm/mach-mmp/include/mach/gpio.h | 3 -
arch/arm/mach-mmp/include/mach/irqs.h | 1 +
arch/arm/mach-mmp/tavorevb.c | 4 +-
arch/arm/mach-mmp/teton_bga.c | 2 +-
arch/arm/mach-pxa/capc7117.c | 12 ++--
arch/arm/mach-pxa/cm-x270.c | 2 +-
arch/arm/mach-pxa/cm-x2xx-pci.c | 4 +-
arch/arm/mach-pxa/colibri-pxa270.c | 6 +-
arch/arm/mach-pxa/colibri-pxa300.c | 4 +-
arch/arm/mach-pxa/colibri-pxa320.c | 4 +-
arch/arm/mach-pxa/corgi.c | 2 +-
arch/arm/mach-pxa/em-x270.c | 6 +-
arch/arm/mach-pxa/hx4700.c | 18 +++---
arch/arm/mach-pxa/icontrol.c | 8 +-
arch/arm/mach-pxa/include/mach/csb726.h | 4 +-
arch/arm/mach-pxa/include/mach/gpio.h | 3 -
arch/arm/mach-pxa/littleton.c | 2 +-
arch/arm/mach-pxa/magician.c | 8 +-
arch/arm/mach-pxa/mioa701.c | 12 ++--
arch/arm/mach-pxa/mxm8x10.c | 4 +-
arch/arm/mach-pxa/poodle.c | 2 +-
arch/arm/mach-pxa/pxa25x.c | 2 +-
arch/arm/mach-pxa/pxa27x.c | 2 +-
arch/arm/mach-pxa/raumfeld.c | 14 ++--
arch/arm/mach-pxa/saar.c | 6 +-
arch/arm/mach-pxa/saarb.c | 2 +-
arch/arm/mach-pxa/spitz.c | 2 +-
arch/arm/mach-pxa/stargate2.c | 4 +-
arch/arm/mach-pxa/tavorevb.c | 4 +-
arch/arm/mach-pxa/tavorevb3.c | 2 +-
arch/arm/mach-pxa/tosa.c | 4 +-
arch/arm/mach-pxa/viper.c | 16 +++---
arch/arm/mach-pxa/vpac270.c | 4 +-
arch/arm/mach-pxa/z2.c | 2 +-
arch/arm/mach-pxa/zeus.c | 34 ++++++------
arch/arm/mach-pxa/zylonite.c | 4 +-
arch/arm/plat-pxa/include/plat/gpio-pxa.h | 1 +
drivers/gpio/gpio-pxa.c | 89 +++++++++++++++++++++++++++-
41 files changed, 195 insertions(+), 117 deletions(-)
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 06b5ad7..fb7dfc1 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -120,8 +120,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(27),
- .end = gpio_to_irq(27),
+ .start = MMP_GPIO_TO_IRQ(27),
+ .end = MMP_GPIO_TO_IRQ(27),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index c4fd806..a64c172 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -87,8 +87,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(155),
- .end = gpio_to_irq(155),
+ .start = MMP_GPIO_TO_IRQ(155),
+ .end = MMP_GPIO_TO_IRQ(155),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
index c017a98..f7bcc30 100644
--- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
@@ -2,6 +2,7 @@
#define __ASM_MACH_GPIO_PXA_H
#include <mach/addr-map.h>
+#include <mach/cputype.h>
#include <mach/irqs.h>
#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
index 6812623..32b684a 100644
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -3,9 +3,6 @@
#include <asm-generic/gpio.h>
-#define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio))
-#define irq_to_gpio(irq) ((irq) - IRQ_GPIO_START)
-
#define __gpio_is_inverted(gpio) (0)
#define __gpio_is_occupied(gpio) (0)
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index a09d328..ec95951 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -221,6 +221,7 @@
#define IRQ_GPIO_START 128
#define IRQ_GPIO_NUM 192
#define IRQ_GPIO(x) (IRQ_GPIO_START + (x))
+#define MMP_GPIO_TO_IRQ(gpio) (IRQ_GPIO_START + (gpio))
#define IRQ_BOARD_START (IRQ_GPIO_START + IRQ_GPIO_NUM)
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index eb5be87..0afe3a3 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -71,8 +71,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(80),
- .end = gpio_to_irq(80),
+ .start = MMP_GPIO_TO_IRQ(80),
+ .end = MMP_GPIO_TO_IRQ(80),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
index bbe4727..825a01c 100644
--- a/arch/arm/mach-mmp/teton_bga.c
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -66,7 +66,7 @@ static struct pxa27x_keypad_platform_data teton_bga_keypad_info __initdata = {
static struct i2c_board_info teton_bga_i2c_info[] __initdata = {
{
I2C_BOARD_INFO("ds1337", 0x68),
- .irq = gpio_to_irq(RTC_INT_GPIO)
+ .irq = MMP_GPIO_TO_IRQ(RTC_INT_GPIO)
},
};
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 4efc16d..5516317 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -50,8 +50,8 @@ static struct resource capc7117_ide_resources[] = {
.flags = IORESOURCE_MEM
},
[2] = {
- .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
- .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
}
};
@@ -80,7 +80,7 @@ static void __init capc7117_ide_init(void)
static struct plat_serial8250_port ti16c752_platform_data[] = {
[0] = {
.mapbase = 0x14000000,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)),
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO78)),
.irqflags = IRQF_TRIGGER_RISING,
.flags = TI16C752_FLAGS,
.iotype = UPIO_MEM,
@@ -89,7 +89,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = {
},
[1] = {
.mapbase = 0x14000040,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)),
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO79)),
.irqflags = IRQF_TRIGGER_RISING,
.flags = TI16C752_FLAGS,
.iotype = UPIO_MEM,
@@ -98,7 +98,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = {
},
[2] = {
.mapbase = 0x14000080,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)),
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO80)),
.irqflags = IRQF_TRIGGER_RISING,
.flags = TI16C752_FLAGS,
.iotype = UPIO_MEM,
@@ -107,7 +107,7 @@ static struct plat_serial8250_port ti16c752_platform_data[] = {
},
[3] = {
.mapbase = 0x140000c0,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)),
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO81)),
.irqflags = IRQF_TRIGGER_RISING,
.flags = TI16C752_FLAGS,
.iotype = UPIO_MEM,
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 4ebcee5..431ef56 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -380,7 +380,7 @@ static struct spi_board_info cm_x270_spi_devices[] __initdata = {
.modalias = "libertas_spi",
.max_speed_hz = 13000000,
.bus_num = 2,
- .irq = gpio_to_irq(95),
+ .irq = PXA_GPIO_TO_IRQ(95),
.chip_select = 0,
.controller_data = &cm_x270_libertas_chip,
.platform_data = &cm_x270_libertas_pdata,
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index 6bf479d..dd8443f 100644
--- a/arch/arm/mach-pxa/cm-x2xx-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -43,9 +43,9 @@ void __cmx2xx_pci_init_irq(int irq_gpio)
cmx2xx_it8152_irq_gpio = irq_gpio;
- irq_set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
+ irq_set_irq_type(PXA_GPIO_TO_IRQ(irq_gpio), IRQ_TYPE_EDGE_RISING);
- irq_set_chained_handler(gpio_to_irq(irq_gpio),
+ irq_set_chained_handler(PXA_GPIO_TO_IRQ(irq_gpio),
cmx2xx_it8152_irq_demux);
}
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 7db6646..3b25472 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -217,8 +217,8 @@ static struct resource colibri_pxa270_dm9000_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .start = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
- .end = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
},
};
@@ -248,7 +248,7 @@ static pxa2xx_audio_ops_t colibri_pxa270_ac97_pdata = {
};
static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
- .irq = gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ),
+ .irq = PXA_GPIO_TO_IRQ(GPIO113_COLIBRI_PXA270_TS_IRQ),
};
static struct platform_device colibri_pxa270_ucb1400_device = {
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index c825e8b..0a6222e 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -78,8 +78,8 @@ static struct resource colibri_asix_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
- .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+ .end = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 692e1ff..8cbb2b4 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -115,8 +115,8 @@ static struct resource colibri_asix_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
- .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+ .end = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 3e9483b..bed7cec 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -530,7 +530,7 @@ static struct spi_board_info corgi_spi_devices[] = {
.chip_select = 0,
.platform_data = &corgi_ads7846_info,
.controller_data= &corgi_ads7846_chip,
- .irq = gpio_to_irq(CORGI_GPIO_TP_INT),
+ .irq = PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT),
}, {
.modalias = "corgi-lcd",
.max_speed_hz = 50000,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 3358f4d..e71c395 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -558,7 +558,7 @@ static int em_x270_mci_init(struct device *dev,
return PTR_ERR(em_x270_sdio_ldo);
}
- err = request_irq(gpio_to_irq(mmc_cd), em_x270_detect_int,
+ err = request_irq(PXA_GPIO_TO_IRQ(mmc_cd), em_x270_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING,
"MMC card detect", data);
@@ -588,7 +588,7 @@ static int em_x270_mci_init(struct device *dev,
return 0;
err_gpio_wp:
- free_irq(gpio_to_irq(mmc_cd), data);
+ free_irq(PXA_GPIO_TO_IRQ(mmc_cd), data);
err_irq:
regulator_put(em_x270_sdio_ldo);
@@ -611,7 +611,7 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
static void em_x270_mci_exit(struct device *dev, void *data)
{
- free_irq(gpio_to_irq(mmc_cd), data);
+ free_irq(PXA_GPIO_TO_IRQ(mmc_cd), data);
regulator_put(em_x270_sdio_ldo);
if (machine_is_em_x270())
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 6f6368e..82e9976 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -252,8 +252,8 @@ static struct resource asic3_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
- .end = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ),
.flags = IORESOURCE_IRQ,
},
/* SD part */
@@ -263,8 +263,8 @@ static struct resource asic3_resources[] = {
.flags = IORESOURCE_MEM,
},
[3] = {
- .start = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
- .end = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
.flags = IORESOURCE_IRQ,
},
};
@@ -587,7 +587,7 @@ static struct spi_board_info tsc2046_board_info[] __initdata = {
.modalias = "ads7846",
.bus_num = 2,
.max_speed_hz = 2600000, /* 100 kHz sample rate */
- .irq = gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ),
+ .irq = PXA_GPIO_TO_IRQ(GPIO58_HX4700_TSC2046_nPENIRQ),
.platform_data = &tsc2046_info,
.controller_data = &tsc2046_chip,
},
@@ -635,15 +635,15 @@ static struct resource power_supply_resources[] = {
.name = "ac",
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
- .start = gpio_to_irq(GPIOD9_nAC_IN),
- .end = gpio_to_irq(GPIOD9_nAC_IN),
+ .start = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN),
+ .end = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN),
},
[1] = {
.name = "usb",
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
- .start = gpio_to_irq(GPIOD14_nUSBC_DETECT),
- .end = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+ .start = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT),
+ .end = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT),
},
};
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index f78d5db..33e81e8 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -86,7 +86,7 @@ static struct spi_board_info mcp251x_board_info[] = {
.chip_select = 0,
.platform_data = &mcp251x_info,
.controller_data = &mcp251x_chip_info1,
- .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ1)
+ .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1)
},
{
.modalias = "mcp2515",
@@ -95,7 +95,7 @@ static struct spi_board_info mcp251x_board_info[] = {
.chip_select = 1,
.platform_data = &mcp251x_info,
.controller_data = &mcp251x_chip_info2,
- .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ2)
+ .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2)
},
{
.modalias = "mcp2515",
@@ -104,7 +104,7 @@ static struct spi_board_info mcp251x_board_info[] = {
.chip_select = 0,
.platform_data = &mcp251x_info,
.controller_data = &mcp251x_chip_info3,
- .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ3)
+ .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3)
},
{
.modalias = "mcp2515",
@@ -113,7 +113,7 @@ static struct spi_board_info mcp251x_board_info[] = {
.chip_select = 1,
.platform_data = &mcp251x_info,
.controller_data = &mcp251x_chip_info4,
- .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ4)
+ .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4)
}
};
diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h
index 747ab1a..2628e7b 100644
--- a/arch/arm/mach-pxa/include/mach/csb726.h
+++ b/arch/arm/mach-pxa/include/mach/csb726.h
@@ -19,8 +19,8 @@
#define CSB726_FLASH_SIZE (64 * 1024 * 1024)
#define CSB726_FLASH_uMON (8 * 1024 * 1024)
-#define CSB726_IRQ_LAN gpio_to_irq(CSB726_GPIO_IRQ_LAN)
-#define CSB726_IRQ_SM501 gpio_to_irq(CSB726_GPIO_IRQ_SM501)
+#define CSB726_IRQ_LAN PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_LAN)
+#define CSB726_IRQ_SM501 PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_SM501)
#endif
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 13b9039..5cf0137 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -28,8 +28,5 @@
/* The defines for the driver are needed for the accelerated accessors */
#include "gpio-pxa.h"
-#define gpio_to_irq(gpio) PXA_GPIO_TO_IRQ(gpio)
-#define irq_to_gpio(irq) (irq - PXA_GPIO_TO_IRQ(0))
-
#include <plat/gpio.h>
#endif
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 9cd2356..27147f6 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -395,7 +395,7 @@ static struct i2c_board_info littleton_i2c_info[] = {
.type = "da9034",
.addr = 0x34,
.platform_data = &littleton_da9034_info,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO18)),
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO18)),
},
[1] = {
.type = "max7320",
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 4b796c3..e340ea0 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -184,8 +184,8 @@ static struct resource egpio_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),
- .end = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
.flags = IORESOURCE_IRQ,
},
};
@@ -468,8 +468,8 @@ static struct resource pasic3_resources[] = {
},
/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
[1] = {
- .start = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ),
- .end = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index b938fc2..1144def 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -314,7 +314,7 @@ static int __init gsm_init(void)
rc = gpio_request_array(ARRAY_AND_SIZE(gsm_gpios));
if (rc)
goto err_gpio;
- rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
+ rc = request_irq(PXA_GPIO_TO_IRQ(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"GSM XS200 Power Irq", NULL);
if (rc)
@@ -333,7 +333,7 @@ err_gpio:
static void gsm_exit(void)
{
- free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
+ free_irq(PXA_GPIO_TO_IRQ(GPIO25_GSM_MOD_ON_STATE), NULL);
gpio_free_array(ARRAY_AND_SIZE(gsm_gpios));
}
@@ -541,15 +541,15 @@ static struct pda_power_pdata power_pdata = {
static struct resource power_resources[] = {
[0] = {
.name = "ac",
- .start = gpio_to_irq(GPIO96_AC_DETECT),
- .end = gpio_to_irq(GPIO96_AC_DETECT),
+ .start = PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
+ .end = PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
},
[1] = {
.name = "usb",
- .start = gpio_to_irq(GPIO13_nUSB_DETECT),
- .end = gpio_to_irq(GPIO13_nUSB_DETECT),
+ .start = PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
+ .end = PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
},
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index b5a8fd3..a13a1e3 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -416,8 +416,8 @@ static struct resource dm9k_resources[] = {
.flags = IORESOURCE_MEM
},
[2] = {
- .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
- .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
}
};
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 7c8a308..b5a4214 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -211,7 +211,7 @@ static struct spi_board_info poodle_spi_devices[] = {
.bus_num = 1,
.platform_data = &poodle_ads7846_info,
.controller_data= &poodle_ads7846_chip,
- .irq = gpio_to_irq(POODLE_GPIO_TP_INT),
+ .irq = PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT),
},
};
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 8746e10..d4fca6a 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -287,7 +287,7 @@ static inline void pxa25x_init_pm(void) {}
static int pxa25x_set_wake(struct irq_data *d, unsigned int on)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
uint32_t mask = 0;
if (gpio >= 0 && gpio < 85)
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 2bb5cf8..08eb452 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -355,7 +355,7 @@ static inline void pxa27x_init_pm(void) {}
*/
static int pxa27x_set_wake(struct irq_data *d, unsigned int on)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
uint32_t mask;
if (gpio >= 0 && gpio < 128)
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 6810cdd..9d13f87 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -292,8 +292,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
{
- .start = gpio_to_irq(GPIO_ETH_IRQ),
- .end = gpio_to_irq(GPIO_ETH_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
@@ -671,7 +671,7 @@ static struct lis3lv02d_platform_data lis3_pdata = {
.chip_select = 1, \
.controller_data = (void *) GPIO_ACCEL_CS, \
.platform_data = &lis3_pdata, \
- .irq = gpio_to_irq(GPIO_ACCEL_IRQ), \
+ .irq = PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ), \
}
#define SPI_DAC7512 \
@@ -823,10 +823,10 @@ static void __init raumfeld_power_init(void)
else
gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
- power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK);
- power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK);
+ power_supply_resources[0].start = PXA_GPIO_TO_IRQ(GPIO_CHARGE_DC_OK);
+ power_supply_resources[0].end = PXA_GPIO_TO_IRQ(GPIO_CHARGE_DC_OK);
- ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE),
+ ret = request_irq(PXA_GPIO_TO_IRQ(GPIO_CHARGE_DONE),
&charge_done_irq, IORESOURCE_IRQ_LOWEDGE,
"charge_done", NULL);
@@ -955,7 +955,7 @@ static struct eeti_ts_platform_data eeti_ts_pdata = {
static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
.type = "eeti_ts",
.addr = 0x0a,
- .irq = gpio_to_irq(GPIO_TOUCH_IRQ),
+ .irq = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
.platform_data = &eeti_ts_pdata,
};
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index fc2c1e0..423ec89 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -96,8 +96,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
- .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
@@ -502,7 +502,7 @@ static struct i2c_board_info saar_i2c_info[] = {
.type = "da9034",
.addr = 0x34,
.platform_data = &saar_da9034_info,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
},
};
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 3c988b6f..cfa172c 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -91,7 +91,7 @@ static struct i2c_board_info saarb_i2c_info[] = {
.type = "88PM860x",
.addr = 0x34,
.platform_data = &saarb_pm8607_info,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
},
};
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index d8dec91..4c3600b 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -551,7 +551,7 @@ static struct spi_board_info spitz_spi_devices[] = {
.chip_select = 0,
.platform_data = &spitz_ads7846_info,
.controller_data = &spitz_ads7846_chip,
- .irq = gpio_to_irq(SPITZ_GPIO_TP_INT),
+ .irq = PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT),
}, {
.modalias = "corgi-lcd",
.max_speed_hz = 50000,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index bbf79d5..940ca56 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -546,7 +546,7 @@ static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = {
.type = "da9030",
.addr = 0x49,
.platform_data = &imote2_da9030_pdata,
- .irq = gpio_to_irq(1),
+ .irq = PXA_GPIO_TO_IRQ(1),
},
};
@@ -913,7 +913,7 @@ static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = {
.type = "da9030",
.addr = 0x49,
.platform_data = &stargate2_da9030_pdata,
- .irq = gpio_to_irq(1),
+ .irq = PXA_GPIO_TO_IRQ(1),
},
};
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index ad47bb9..43bdcb9 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -85,8 +85,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
- .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index fd56916..46c60b3 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -101,7 +101,7 @@ static struct i2c_board_info evb3_i2c_info[] = {
.type = "88PM860x",
.addr = 0x34,
.platform_data = &evb3_pm8607_info,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
},
};
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 402b0c9..1ddb982 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -404,8 +404,8 @@ static struct pda_power_pdata tosa_power_data = {
static struct resource tosa_power_resource[] = {
{
.name = "ac",
- .start = gpio_to_irq(TOSA_GPIO_AC_IN),
- .end = gpio_to_irq(TOSA_GPIO_AC_IN),
+ .start = PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
+ .end = PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
.flags = IORESOURCE_IRQ |
IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 242ddae..b49d10b 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -315,9 +315,9 @@ static void __init viper_init_irq(void)
set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
}
- irq_set_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
+ irq_set_chained_handler(PXA_GPIO_TO_IRQ(VIPER_CPLD_GPIO),
viper_irq_handler);
- irq_set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
+ irq_set_irq_type(PXA_GPIO_TO_IRQ(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
}
/* Flat Panel */
@@ -422,8 +422,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(VIPER_ETH_GPIO),
- .end = gpio_to_irq(VIPER_ETH_GPIO),
+ .start = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
+ .end = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
[2] = {
@@ -546,7 +546,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
/* External UARTs */
{
.mapbase = VIPER_UARTA_PHYS,
- .irq = gpio_to_irq(VIPER_UARTA_GPIO),
+ .irq = PXA_GPIO_TO_IRQ(VIPER_UARTA_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 1843200,
.regshift = 1,
@@ -556,7 +556,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
},
{
.mapbase = VIPER_UARTB_PHYS,
- .irq = gpio_to_irq(VIPER_UARTB_GPIO),
+ .irq = PXA_GPIO_TO_IRQ(VIPER_UARTB_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 1843200,
.regshift = 1,
@@ -596,8 +596,8 @@ static struct resource isp116x_resources[] = {
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = gpio_to_irq(VIPER_USB_GPIO),
- .end = gpio_to_irq(VIPER_USB_GPIO),
+ .start = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
+ .end = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 585e4f4..bf2403c 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -610,8 +610,8 @@ static struct resource vpac270_ide_resources[] = {
.flags = IORESOURCE_DMA
},
[3] = { /* IDE IRQ pin */
- .start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
- .end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
.flags = IORESOURCE_IRQ
}
};
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 65fed37..7bd4863 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -573,7 +573,7 @@ static struct spi_board_info spi_board_info[] __initdata = {
.modalias = "libertas_spi",
.platform_data = &z2_lbs_pdata,
.controller_data = &z2_lbs_chip_info,
- .irq = gpio_to_irq(GPIO36_ZIPITZ2_WIFI_IRQ),
+ .irq = PXA_GPIO_TO_IRQ(GPIO36_ZIPITZ2_WIFI_IRQ),
.max_speed_hz = 13000000,
.bus_num = 1,
.chip_select = 0,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index c424e7d..7d22c0b 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -136,12 +136,12 @@ static void __init zeus_init_irq(void)
/* Peripheral IRQs. It would be nice to move those inside driver
configuration, but it is not supported at the moment. */
- irq_set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING);
- irq_set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING);
- irq_set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING);
- irq_set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO),
+ irq_set_irq_type(PXA_GPIO_TO_IRQ(ZEUS_AC97_GPIO), IRQ_TYPE_EDGE_RISING);
+ irq_set_irq_type(PXA_GPIO_TO_IRQ(ZEUS_WAKEUP_GPIO), IRQ_TYPE_EDGE_RISING);
+ irq_set_irq_type(PXA_GPIO_TO_IRQ(ZEUS_PTT_GPIO), IRQ_TYPE_EDGE_RISING);
+ irq_set_irq_type(PXA_GPIO_TO_IRQ(ZEUS_EXTGPIO_GPIO),
IRQ_TYPE_EDGE_FALLING);
- irq_set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING);
+ irq_set_irq_type(PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO), IRQ_TYPE_EDGE_FALLING);
/* Setup ISA IRQs */
for (level = 0; level < ARRAY_SIZE(zeus_isa_irqs); level++) {
@@ -151,8 +151,8 @@ static void __init zeus_init_irq(void)
set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
}
- irq_set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING);
- irq_set_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler);
+ irq_set_irq_type(PXA_GPIO_TO_IRQ(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING);
+ irq_set_chained_handler(PXA_GPIO_TO_IRQ(ZEUS_ISA_GPIO), zeus_irq_handler);
}
@@ -233,7 +233,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
/* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */
{ /* COM1 */
.mapbase = 0x10000000,
- .irq = gpio_to_irq(ZEUS_UARTA_GPIO),
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTA_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 14745600,
.regshift = 1,
@@ -242,7 +242,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
},
{ /* COM2 */
.mapbase = 0x10800000,
- .irq = gpio_to_irq(ZEUS_UARTB_GPIO),
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTB_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 14745600,
.regshift = 1,
@@ -251,7 +251,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
},
{ /* COM3 */
.mapbase = 0x11000000,
- .irq = gpio_to_irq(ZEUS_UARTC_GPIO),
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTC_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 14745600,
.regshift = 1,
@@ -260,7 +260,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
},
{ /* COM4 */
.mapbase = 0x11800000,
- .irq = gpio_to_irq(ZEUS_UARTD_GPIO),
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTD_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 14745600,
.regshift = 1,
@@ -321,8 +321,8 @@ static struct resource zeus_dm9k0_resource[] = {
.flags = IORESOURCE_MEM
},
[2] = {
- .start = gpio_to_irq(ZEUS_ETH0_GPIO),
- .end = gpio_to_irq(ZEUS_ETH0_GPIO),
+ .start = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
+ .end = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@@ -339,8 +339,8 @@ static struct resource zeus_dm9k1_resource[] = {
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = gpio_to_irq(ZEUS_ETH1_GPIO),
- .end = gpio_to_irq(ZEUS_ETH1_GPIO),
+ .start = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
+ .end = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@@ -423,7 +423,7 @@ static struct spi_board_info zeus_spi_board_info[] = {
[0] = {
.modalias = "mcp2515",
.platform_data = &zeus_mcp2515_pdata,
- .irq = gpio_to_irq(ZEUS_CAN_GPIO),
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO),
.max_speed_hz = 1*1000*1000,
.bus_num = 3,
.mode = SPI_MODE_0,
@@ -753,7 +753,7 @@ static struct i2c_board_info __initdata zeus_i2c_devices[] = {
{
I2C_BOARD_INFO("pca9535", 0x20),
.platform_data = &zeus_pca953x_pdata[2],
- .irq = gpio_to_irq(ZEUS_EXTGPIO_GPIO),
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_EXTGPIO_GPIO),
},
{ I2C_BOARD_INFO("lm75a", 0x48) },
{ I2C_BOARD_INFO("24c01", 0x50) },
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 31d4968..2406fd2 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -407,8 +407,8 @@ static void __init zylonite_init(void)
* Note: We depend that the bootloader set
* the correct value to MSC register for SMC91x.
*/
- smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq);
- smc91x_resources[1].end = gpio_to_irq(gpio_eth_irq);
+ smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq);
+ smc91x_resources[1].end = PXA_GPIO_TO_IRQ(gpio_eth_irq);
platform_device_register(&smc91x_device);
pxa_set_ac97_info(NULL);
diff --git a/arch/arm/plat-pxa/include/plat/gpio-pxa.h b/arch/arm/plat-pxa/include/plat/gpio-pxa.h
index b6390be..15bf9be 100644
--- a/arch/arm/plat-pxa/include/plat/gpio-pxa.h
+++ b/arch/arm/plat-pxa/include/plat/gpio-pxa.h
@@ -40,5 +40,6 @@ extern int pxa_last_gpio;
typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
+extern int pxa_irq_to_gpio(int irq);
#endif /* __PLAT_PXA_GPIO_H */
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index 8c34e8c..ed23cbb 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -39,8 +39,19 @@ struct pxa_gpio_chip {
#endif
};
+enum {
+ PXA25X_GPIO = 0,
+ PXA26X_GPIO,
+ PXA27X_GPIO,
+ PXA3XX_GPIO,
+ PXA93X_GPIO,
+ MMP_GPIO = 0x10,
+ MMP2_GPIO,
+};
+
static DEFINE_SPINLOCK(gpio_lock);
static struct pxa_gpio_chip *pxa_gpio_chips;
+static int gpio_type;
#define for_each_gpio_chip(i, c) \
for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
@@ -55,6 +66,75 @@ static inline struct pxa_gpio_chip *gpio_to_pxachip(unsigned gpio)
return &pxa_gpio_chips[gpio_to_bank(gpio)];
}
+static inline int gpio_is_pxa_type(int type)
+{
+ return (type & MMP_GPIO) == 0;
+}
+
+static inline int gpio_is_mmp_type(int type)
+{
+ return (type & MMP_GPIO) != 0;
+}
+
+#ifdef CONFIG_ARCH_PXA
+static inline int __pxa_gpio_to_irq(int gpio)
+{
+ if (gpio_is_pxa_type(gpio_type))
+ return PXA_GPIO_TO_IRQ(gpio);
+ return -1;
+}
+
+static inline int __pxa_irq_to_gpio(int irq)
+{
+ if (gpio_is_pxa_type(gpio_type))
+ return irq - PXA_GPIO_TO_IRQ(0);
+ return -1;
+}
+#else
+static inline int __pxa_gpio_to_irq(int gpio) { return -1; }
+static inline int __pxa_irq_to_gpio(int irq) { return -1; }
+#endif
+
+#ifdef CONFIG_ARCH_MMP
+static inline int __mmp_gpio_to_irq(int gpio)
+{
+ if (gpio_is_mmp_type(gpio_type))
+ return MMP_GPIO_TO_IRQ(gpio);
+ return -1;
+}
+
+static inline int __mmp_irq_to_gpio(int irq)
+{
+ if (gpio_is_mmp_type(gpio_type))
+ return irq - MMP_GPIO_TO_IRQ(0);
+ return -1;
+}
+#else
+static inline int __mmp_gpio_to_irq(int gpio) { return -1; }
+static inline int __mmp_irq_to_gpio(int irq) { return -1; }
+#endif
+
+static int pxa_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio, ret;
+
+ gpio = chip->base + offset;
+ ret = __pxa_gpio_to_irq(gpio);
+ if (ret >= 0)
+ return ret;
+ return __mmp_gpio_to_irq(gpio);
+}
+
+int pxa_irq_to_gpio(int irq)
+{
+ int ret;
+
+ ret = __pxa_irq_to_gpio(irq);
+ if (ret >= 0)
+ return ret;
+ return __mmp_irq_to_gpio(irq);
+}
+
static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
void __iomem *base = gpio_chip_base(chip);
@@ -131,6 +211,7 @@ static int __init pxa_init_gpio_chip(int gpio_end)
c->direction_output = pxa_gpio_direction_output;
c->get = pxa_gpio_get;
c->set = pxa_gpio_set;
+ c->to_irq = pxa_gpio_to_irq;
/* number of GPIOs on last bank may be less than 32 */
c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
@@ -158,7 +239,7 @@ static inline void update_edge_detect(struct pxa_gpio_chip *c)
static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
{
struct pxa_gpio_chip *c;
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
unsigned long gpdr, mask = GPIO_bit(gpio);
c = gpio_to_pxachip(gpio);
@@ -229,7 +310,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
static void pxa_ack_muxed_gpio(struct irq_data *d)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
__raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
@@ -237,7 +318,7 @@ static void pxa_ack_muxed_gpio(struct irq_data *d)
static void pxa_mask_muxed_gpio(struct irq_data *d)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
uint32_t grer, gfer;
@@ -251,7 +332,7 @@ static void pxa_mask_muxed_gpio(struct irq_data *d)
static void pxa_unmask_muxed_gpio(struct irq_data *d)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
c->irq_mask |= GPIO_bit(gpio);
--
1.7.2.5
More information about the linux-arm-kernel
mailing list