October 2011 Archives by author
Starting: Sat Oct 1 06:39:21 EDT 2011
Ending: Mon Oct 31 23:26:46 EDT 2011
Messages: 3264
- [patch 1/1] iMX: Fix module build
Arnaud Patard (Rtp)
- [PATCH] ARM: kprobes: work around build errors
Jon Medhurst (Tixy)
- [PATCH] mmc: mmci: Do not release spinlock in request_end
Jon Medhurst (Tixy)
- [PATCH] ARM: kprobes: Fix build error in test code
Jon Medhurst (Tixy)
- [PATCH] imx: add polled io uart methods
Saleem Abdulrasool
- [PATCH] imx: add polled io uart methods
Saleem Abdulrasool
- [PATCH] imx: add polled io uart methods
Saleem Abdulrasool
- [PATCH 0/3] mmc: sdhci-s3c: Remove 'clk_type' member from platform data
Thomas Abraham
- [PATCH 1/3] mmc: sdhci-s3c: Remove usage of clk_type member in platform data
Thomas Abraham
- [PATCH 2/3] arm: exynos4: use 'exynos4-sdhci' as device name for sdhci controllers
Thomas Abraham
- [PATCH 3/3] arm: samsung: remove all uses of clk_type member in sdhci platform data
Thomas Abraham
- [PATCH 1/3] mmc: sdhci-s3c: Remove usage of clk_type member in platform data
Thomas Abraham
- [PATCH 0/3] mmc: sdhci-s3c: Add device tree support for Samsung's sdhci controller driver
Thomas Abraham
- [PATCH 1/3] mmc: sdhci-s3c: Keep a copy of platform data and use it
Thomas Abraham
- [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities
Thomas Abraham
- [PATCH 3/3] mmc: sdhci-s3c: Add device tree support
Thomas Abraham
- [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities
Thomas Abraham
- [PATCH 0/2] arm: samsung: add device tree support for gic and interrupt combiner
Thomas Abraham
- [PATCH 1/2] arm: samsung: move timer irq numbers to end of linux irq space
Thomas Abraham
- [PATCH 2/2] arm: exynos4: add support for dt irq specifier to linux virq conversion
Thomas Abraham
- [PATCH 1/2] arm: samsung: move timer irq numbers to end of linux irq space
Thomas Abraham
- [PATCH 1/2] arm: samsung: move timer irq numbers to end of linux irq space
Thomas Abraham
- Long stalls during boot with -next
Thomas Abraham
- Serieal console on Samsung S3C6410 ARM11 CPU (Was [ANNOUNCE] 3.0.6-rt17)
Thomas Abraham
- [PATCH 0/3] GIC OF bindings
Thomas Abraham
- Serieal console on Samsung S3C6410 ARM11 CPU (Was [ANNOUNCE] 3.0.6-rt17)
Thomas Abraham
- [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities
Thomas Abraham
- [PATCH 0/3] ARM: Samsung: Add device tree support for GIC and Interrupt Combiner
Thomas Abraham
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Thomas Abraham
- [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions
Thomas Abraham
- [PATCH 3/3] ARM: Exynos4: Add support for dt irq specifier to linux virq conversion
Thomas Abraham
- [PATCH v2 0/9] serial: samsung: rework clock lookup and add device tree support
Thomas Abraham
- [PATCH v2 1/9] serial: samsung: Keep a copy of the location of platform data in driver's private data
Thomas Abraham
- [PATCH v2 2/9] serial: samsung: move handling of fclk/n clock to platform code
Thomas Abraham
- [PATCH v2 3/9] serial: samsung: switch to clkdev based clock lookup
Thomas Abraham
- [PATCH v2 4/9] serial: samsung: remove struct 's3c24xx_uart_clksrc' and all uses of it
Thomas Abraham
- [PATCH v2 5/9] serial: samsung: remove all uses of get_clksrc and set_clksrc
Thomas Abraham
- [PATCH v2 6/9] arm: samsung: register uart clocks to clock lookup list
Thomas Abraham
- [PATCH v2 7/9] serial: samsung: merge all SoC specific port reset functions
Thomas Abraham
- [PATCH v2 8/9] serial: samsung: merge probe() function from all SoC specific extensions
Thomas Abraham
- [PATCH v2 9/9] serial: samsung: add device tree support
Thomas Abraham
- [PATCH 2/3] ARM: plat-samsung: use Kconfig choice for debug UART selection
Thomas Abraham
- [PATCH 2/3] ARM: plat-samsung: use Kconfig choice for debug UART selection
Thomas Abraham
- [PATCH 2/3] ARM: plat-samsung: use Kconfig choice for debug UART selection
Thomas Abraham
- [PATCH v5 0/2] Add device tree support for Samsung's keypad controller driver
Thomas Abraham
- [PATCH v5 1/2] input: samsung-keypad: Add HAVE_SAMSUNG_KEYPAD config option
Thomas Abraham
- [PATCH v5 2/2] input: samsung-keypad: Add device tree support
Thomas Abraham
- [PATCH v6 00/10] Add device tree support for PL330 dma controller driver
Thomas Abraham
- [PATCH v6 01/10] DMA: PL330: move filter function into driver
Thomas Abraham
- [PATCH v6 02/10] DMA: PL330: Infer transfer direction from transfer request instead of platform data
Thomas Abraham
- [PATCH v6 03/10] ARM: EXYNOS4: Modify platform data for pl330 driver
Thomas Abraham
- [PATCH v6 04/10] DMA: PL330: Add device tree support
Thomas Abraham
- [PATCH v6 05/10] ARM: SAMSUNG: Add device tree support for pl330 dma engine wrappers
Thomas Abraham
- [PATCH v6 06/10] ARM: EXYNOS4: Limit usage of pl330 device instance to non-dt build
Thomas Abraham
- [PATCH v6 07/10] ARM: Exynos4: Add a alias for pdma clocks
Thomas Abraham
- [PATCH v6 08/10] ARM: S5P64x0: Modify platform data for pl330 driver
Thomas Abraham
- [PATCH v6 09/10] ARM: S5PC100: Modify platform data for pl330 driver
Thomas Abraham
- [PATCH v6 10/10] ARM: S5PV210: Modify platform data for pl330 driver
Thomas Abraham
- [PATCH] rtc: rtc-s3c: Add device tree support
Thomas Abraham
- [PATCH] gpio: exynos4: Add device tree support
Thomas Abraham
- [PATCH 0/2] ARM: Samsung: Add basic device tree support for Exynos4 boards
Thomas Abraham
- [PATCH 1/2] ARM: Samsung: Add Exynos4 device tree enabled board file
Thomas Abraham
- [PATCH 2/2] ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen board
Thomas Abraham
- [PATCH v6 00/10] Add device tree support for PL330 dma controller driver
Thomas Abraham
- [PATCH] gpio: exynos4: Add device tree support
Thomas Abraham
- [PATCH] gpio: exynos4: Add device tree support
Thomas Abraham
- [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities
Thomas Abraham
- [PATCH v6 09/10] ARM: S5PC100: Modify platform data for pl330 driver
Thomas Abraham
- [PATCH v6 03/10] ARM: EXYNOS4: Modify platform data for pl330 driver
Thomas Abraham
- [PATCH v6 03/10] ARM: EXYNOS4: Modify platform data for pl330 driver
Thomas Abraham
- [PATCH v7 03/10] ARM: EXYNOS4: Modify platform data for pl330 driver
Thomas Abraham
- [PATCH v7 09/10] ARM: S5PC100: Modify platform data for pl330 driver
Thomas Abraham
- [PATCH] gpio: exynos4: Add device tree support
Thomas Abraham
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Thomas Abraham
- [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions
Thomas Abraham
- [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions
Thomas Abraham
- [PATCH] gpio: exynos4: Add device tree support
Thomas Abraham
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Thomas Abraham
- [PATCH v2] gpio/samsung: Add device tree support for Exynos4
Thomas Abraham
- ARM: Exynos4: Enable device tree support for GIC controller
Thomas Abraham
- [PATCH v2 1/3] ARM: Exynos4: Move timer irq numbers to end of linux irq space
Thomas Abraham
- [PATCH v2 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions
Thomas Abraham
- [PATCH v2 3/3] ARM: Exynos4: Enable conversion of GIC dt irq specifier to linux virq
Thomas Abraham
- [PATCH v2 0/2] ARM: Samsung: Add basic device tree support for Exynos4 boards
Thomas Abraham
- [PATCH v2 1/2] ARM: Samsung: Add Exynos4 device tree enabled board file
Thomas Abraham
- [PATCH v2 2/2] ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen board
Thomas Abraham
- [PATCH] arm: exynos4: build is failing due to missing SZ_4K definition
Angus Ainslie
- [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism
Dave Airlie
- [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism
Dave Airlie
- [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism
Dave Airlie
- [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism
Dave Airlie
- [alsa-devel] [PATCH v3 0/3] ARM: mxs: add recording support for saif
Dong Aisheng
- [PATCH] ARM: tegra: Make earlyprintk choose a UART at runtime.
Doug Anderson
- [PATCH] Add platform driver support to the CS890x driver
Domenico Andreoli
- [GIT PULL] GIC DT binding support
Domenico Andreoli
- [PATCH] Fix s3c24xx build error if !CONFIG_PM
Domenico Andreoli
- [GIT PULL] GIC DT binding support
Domenico Andreoli
- [PATCH v2] Fix s3c24xx build errors if !CONFIG_PM
Domenico Andreoli
- [PATCH] clk: add definition of HAVE_CLK_PREPARE in Kconfig
Domenico Andreoli
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Domenico Andreoli
- [PATCH 0/4] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux
Vishwanath BS
- [PATCH 1/4] ARM: OMAP3 PM: Fix IO Daisychain sequence
Vishwanath BS
- [PATCH 2/4] ARM: OMAP4 PM: Add IO Daisychain support
Vishwanath BS
- [PATCH 3/4] ARM: OMAP3 PM: Enable IO Wake up
Vishwanath BS
- [PATCH 4/4] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux
Vishwanath BS
- [PATCHv2 0/7]ARM: OMAP3PLUS PM: Add IO DaisyChain support via hwmod mux
Vishwanath BS
- [PATCHv2 1/7] ARM: OMAP3 PM: correct enable/disable of daisy io chain
Vishwanath BS
- [PATCHv2 2/7] ARM: OMAP3 PM: Move IO Daisychain function to omap3 prm file
Vishwanath BS
- [PATCHv2 3/7] ARM: OMAP4 PM: Add IO Daisychain support
Vishwanath BS
- [PATCHv2 4/7] ARM: OMAP3 PM: Enable IO Wake up
Vishwanath BS
- [PATCHv2 5/7] ARM: OMAP3PLUS PM: Add IO Daisychain support via hwmod mux
Vishwanath BS
- [PATCHv2 6/7] ARM: OMAP3 PM: Remove IO Daisychain control from cpuidle
Vishwanath BS
- [PATCHv2 7/7] ARM: OMAP3 PM: Enable IO Daisychain for supported chips
Vishwanath BS
- [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method
Felipe Balbi
- [PATCH 16/30] usb/musb: HDRC depends on TWL4030_CORE for OMAP3/4
Felipe Balbi
- [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method
Felipe Balbi
- [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method
Felipe Balbi
- [PATCH 01/26] usb/gadget/pxa25x: is_vbus_present is gone
Felipe Balbi
- [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method
Felipe Balbi
- [PATCH 17/30] usb/musb: allow building USB_MUSB_TUSB6010 as a module
Felipe Balbi
- [RFT/PATCH 1/7] OMAP3+: PM: SR: add suspend/resume handlers
Felipe Balbi
- [RFT/PATCH 2/7] arm: omap: smartreflex: add missing platform_set_drvdata()
Felipe Balbi
- [RFT/PATCH 3/7] arm: omap: smartreflex: use dev_get_drvdata()
Felipe Balbi
- [RFT/PATCH 4/7] arm: omap: smartreflex: move late_initcall() closer to its argument
Felipe Balbi
- [RFT/PATCH 5/7] arm: omap: smartreflex: clean ups all over
Felipe Balbi
- [RFT/PATCH 6/7] arm: omap: smartreflex: fix IRQ handling bug
Felipe Balbi
- [RFT/PATCH 7/7] arm: omap: smartreflex: micro-optimization for sanity check
Felipe Balbi
- [RFT/PATCH 7/7] arm: omap: smartreflex: micro-optimization for sanity check
Felipe Balbi
- [RFT/PATCH 6/7] arm: omap: smartreflex: fix IRQ handling bug
Felipe Balbi
- [PATCH V2 11/16] mmc: omap_hsmmc: ensure pbias configuration is always done
Chris Ball
- [PATCH 0/2] MMC: disable multiblock reads on controllers that don't support them
Chris Ball
- [PATCH V5 1/3] SDHCI: S3C: Use generic clock names for sdhci bus clock options
Chris Ball
- [PATCH] s3c2410: remove __ioaddrc()
Cesar Eduardo Barros
- [PATCH 1/2] [ARM] mach-types: Re-add apf9328
Bedia, Vaibhav
- [PATCH 1/2] [ARM] mach-types: Re-add apf9328
Bedia, Vaibhav
- [PATCH] ARM: S3C2410: Remove section mismatch warning
Tushar Behera
- [PATCH] ARM: S3C2410: Remove section mismatch warning
Tushar Behera
- [PATCH V2 0/2] Add a common macro for creating struct clk_lookup entries
Tushar Behera
- [PATCH V2 0/2] ARM: S3C2410: Remove section mismatch warning
Tushar Behera
- [PATCH V2 1/2] ARM: S3C2410: Add __init attribute to usb_simtec_init()
Tushar Behera
- [PATCH V2 2/2] ARM: S3C2410: irq: Remove __init attributes to fix compilation warning
Tushar Behera
- [PATCH V2 1/2] ARM: S3C2410: Add __init attribute to usb_simtec_init()
Tushar Behera
- [PATCH] ARM: mxs: Use CLKDEV_INIT for creating clk_lookup instance
Tushar Behera
- Serieal console on Samsung S3C6410 ARM11 CPU (Was [ANNOUNCE] 3.0.6-rt17)
Juergen Beisert
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Ohad Ben-Cohen
- [PATCH 10/30] ARM: omap/iommu: always provide iommu debug code
Ohad Ben-Cohen
- [PATCH 10/30] ARM: omap/iommu: always provide iommu debug code
Ohad Ben-Cohen
- [RFC 1/5] ARM: dev_archdata: add private iommu extension
Ohad Ben-Cohen
- [RFC 2/5] ARM: OMAP: omap_device: add a method to set iommu private archdata
Ohad Ben-Cohen
- [RFC 2/5] ARM: OMAP: omap_device: add a method to set iommu private archdata
Ohad Ben-Cohen
- [RFC 1/5] ARM: dev_archdata: add private iommu extension
Ohad Ben-Cohen
- [PATCH] ARM: OMAP: omap_device: Add omap_device_{alloc, delete, register}_ss
Ohad Ben-Cohen
- [Linaro-mm-sig] [PATCHv16 0/9] Contiguous Memory Allocator
Ohad Ben-Cohen
- [PATCH] ARM: OMAP: omap_device: Add omap_device_{alloc, delete, register}_ss
Ohad Ben-Cohen
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Ohad Ben-Cohen
- [PATCH 01/13] hwspinlock: OMAP4: Add spinlock support in DT
Ohad Ben-Cohen
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Ohad Ben-Cohen
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Ohad Ben-Cohen
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Ohad Ben-Cohen
- [PATCH 2/2] iommu/core: split mapping to page sizes as
Ohad Ben-Cohen
- [PATCH] iommu/core: split mapping to page sizes as supported
Ohad Ben-Cohen
- [PATCH] iommu/core: fix build issue
Ohad Ben-Cohen
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Ohad Ben-Cohen
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Ohad Ben-Cohen
- [PATCH 1/2] iommu/core: stop converting bytes to page order
Ohad Ben-Cohen
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Ohad Ben-Cohen
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Ohad Ben-Cohen
- [PATCH v4 2/2] iommu/exynos: Add iommu driver for Exynos Platforms
Ohad Ben-Cohen
- [RFC 1/5] ARM: dev_archdata: add private iommu extension
Ohad Ben-Cohen
- [RFC 1/5] ARM: dev_archdata: add private iommu extension
Ohad Ben-Cohen
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Ohad Ben-Cohen
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Ohad Ben-Cohen
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Ohad Ben-Cohen
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Ohad Ben-Cohen
- [PATCH v4 0/7] iommu: split mapping to page sizes as supported by the hardware
Ohad Ben-Cohen
- [PATCH v4 1/7] iommu/core: stop converting bytes to page order back and forth
Ohad Ben-Cohen
- [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware
Ohad Ben-Cohen
- [PATCH v4 3/7] iommu/omap: announce supported page sizes
Ohad Ben-Cohen
- [PATCH v4 4/7] iommu/msm: announce supported page sizes
Ohad Ben-Cohen
- [PATCH v4 5/7] iommu/amd: announce supported page sizes
Ohad Ben-Cohen
- [PATCH v4 6/7] iommu/intel: announce supported page sizes
Ohad Ben-Cohen
- [PATCH v4 7/7] iommu/core: remove the temporary pgsize settings
Ohad Ben-Cohen
- [PATCH] ARM: OMAP: omap_device: Expose omap_device_{alloc, delete, register}
Ohad Ben-Cohen
- [PATCH 0/7] Introducing a generic AMP framework
Ohad Ben-Cohen
- [PATCH 1/7] amp/remoteproc: add framework for controlling remote processors
Ohad Ben-Cohen
- [PATCH 2/7] amp/remoteproc: add debugfs entries
Ohad Ben-Cohen
- [PATCH 3/7] amp/remoteproc: create rpmsg virtio device
Ohad Ben-Cohen
- [PATCH 4/7] amp/omap: add a remoteproc driver
Ohad Ben-Cohen
- [PATCH 5/7] ARM: OMAP: add amp/remoteproc support
Ohad Ben-Cohen
- [PATCH 6/7] amp/rpmsg: add virtio-based remote processor messaging bus
Ohad Ben-Cohen
- [PATCH 7/7] samples/amp: add an rpmsg driver sample
Ohad Ben-Cohen
- [PATCH 1/7] amp/remoteproc: add framework for controlling remote processors
Ohad Ben-Cohen
- [PATCH 0/7] Introducing a generic AMP framework
Ohad Ben-Cohen
- [GIT PULL] hwspinlock changes for 3.2
Ohad Ben-Cohen
- [GIT PULL] ux500-timers
Arnd Bergmann
- [GIT PULL] dmtimer changes for v3.2 merge window
Arnd Bergmann
- [PATCH 00/11] Generic ARM fixes for randconfig
Arnd Bergmann
- [PATCH 01/11] ARM: export rtc_lock for nvram driver
Arnd Bergmann
- [PATCH 02/11] ARM: SMP depends on MMU
Arnd Bergmann
- [PATCH 03/11] ARM: always use ARM_UNWIND for thumb2 kernels
Arnd Bergmann
- [PATCH 04/11] ARM: allow building alignment.c without PROC_FS
Arnd Bergmann
- [PATCH 05/11] ARM: vfp: use -mfloat-abi=soft to build vfp
Arnd Bergmann
- [PATCH 06/11] ARM: pm: let platforms select cpu_suspend support
Arnd Bergmann
- [PATCH 07/11] ARM: limit CONFIG_HAVE_IDE to platforms that do
Arnd Bergmann
- [PATCH 08/11] ARM: add io{read,write}{16,32}be functions
Arnd Bergmann
- [PATCH 09/11] ARM: pci: always export pcibios_bus_to_resource
Arnd Bergmann
- [PATCH 10/11] ARM: OC_ETM should not select ARM_AMBA
Arnd Bergmann
- [PATCH 11/11] ARM: common/vic: use proper __iomem annotations
Arnd Bergmann
- [PATCH 00/26] ARM: pxa specific randconfig fixes
Arnd Bergmann
- [PATCH 01/26] usb/gadget/pxa25x: is_vbus_present is gone
Arnd Bergmann
- [PATCH 02/26] sound/pxa-zylonite: use a valid device for dev_err()
Arnd Bergmann
- [PATCH 03/26] scsi/mvsas: use proper namespace for IRQ_* symbols
Arnd Bergmann
- [PATCH 04/26] net/pxa168_eth: add missing include of interrupt.h
Arnd Bergmann
- [PATCH 05/26] ARM: pxa: make zylonite_pxa*_init declaration match code
Arnd Bergmann
- [PATCH 06/26] ARM: pxa: add missing header inclusions
Arnd Bergmann
- [PATCH 07/26] ARM: pxa: mbxfb: disable broken debugfs code
Arnd Bergmann
- [PATCH 08/26] ARM: pxa: move z2 to generic cpu_suspend
Arnd Bergmann
- [PATCH 09/26] ARM: pxa: export symbols from pxa3xx-ulpi
Arnd Bergmann
- [PATCH 10/26] ARM: pxa: allow selecting just one of TREO680/CENTRO
Arnd Bergmann
- [PATCH 11/26] ARM: pxa: allow building palm27x without pxafb
Arnd Bergmann
- [PATCH 12/26] ARM: pxa: pxa95x/saarb depends on pxa3xx code
Arnd Bergmann
- [PATCH 13/26] ARM: pxa: use correct __iomem annotations
Arnd Bergmann
- [PATCH 14/26] mtd: nand_h1900 never worked
Arnd Bergmann
- [PATCH 15/26] irda/ficp: only works on some pxa models
Arnd Bergmann
- [PATCH 16/26] ARM: pxa: CPU_PJ4 requires IWMMXT
Arnd Bergmann
- [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa
Arnd Bergmann
- [PATCH 18/26] ARM: pxa: MTD_XIP is not actually working any more
Arnd Bergmann
- [PATCH 19/26] ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ
Arnd Bergmann
- [PATCH 20/26] ARM: pxa: select FB_PXA on saar and tevorevb
Arnd Bergmann
- [PATCH 21/26] ARM: pxa: select POWER_SUPPLY on raumfeld
Arnd Bergmann
- [PATCH 22/26] ARM: pxa: only select SMC91x on xcep when networking is enabled
Arnd Bergmann
- [PATCH 23/26] ARM: pxa: viper: select I2C_GPIO only when I2C is on
Arnd Bergmann
- [PATCH 24/26] ARM: pxa: centro and treo680 need palm27x
Arnd Bergmann
- [PATCH 25/26] ARM: pxa: eseries does not require FB
Arnd Bergmann
- [PATCH 26/26] ARM: pxa: sharpsl pm needs SPI
Arnd Bergmann
- ARM SoC tree: OMAP PM dependency on tip irq/core
Arnd Bergmann
- [PATCH 12/11] ARM: include linux/highmem.h in uaccess functions
Arnd Bergmann
- [PATCH 00/30] ARM/omap: omap specific randconfig fixes
Arnd Bergmann
- [PATCH 01/30] sound/omap: omap_mcpdm_remove cannot be __devexit
Arnd Bergmann
- [PATCH 02/30] video/omap: fix dependencies
Arnd Bergmann
- [PATCH 03/30] video/omap: fix build dependencies
Arnd Bergmann
- [PATCH 04/30] ARM: omap: add missing __devexit_p() annotations
Arnd Bergmann
- [PATCH 05/30] ARM: omap: enable building omap2 without omap2420/2430
Arnd Bergmann
- [PATCH 06/30] ARM: omap: fix build with CONFIG_I2C_OMAP disabled
Arnd Bergmann
- [PATCH 07/30] ARM: omap: fix visibility of omap2_mbox_iva_priv
Arnd Bergmann
- [PATCH 08/30] ARM: omap2+: fix building without i2c
Arnd Bergmann
- [PATCH 09/30] ARM: omap2: export functions used by nand driver
Arnd Bergmann
- [PATCH 10/30] ARM: omap/iommu: always provide iommu debug code
Arnd Bergmann
- [PATCH 11/30] ARM: omap2/n8x0: work around modular omap mmc
Arnd Bergmann
- [PATCH 12/30] ARM: omap4: always build omap_phy_internal
Arnd Bergmann
- [PATCH 13/30] ARM: omap2+: fix omap_hdq_init compilation
Arnd Bergmann
- [PATCH 14/30] ARM: omap2: irq.c is always needed
Arnd Bergmann
- [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method
Arnd Bergmann
- [PATCH 16/30] usb/musb: HDRC depends on TWL4030_CORE for OMAP3/4
Arnd Bergmann
- [PATCH 17/30] usb/musb: allow building USB_MUSB_TUSB6010 as a module
Arnd Bergmann
- [PATCH 18/30] omap-usb: automatically select MFD_OMAP_USB_HOST
Arnd Bergmann
- [PATCH 19/30] tty/serial/omap: console can only be built-in
Arnd Bergmann
- [PATCH 20/30] media/omap_vout: disable driver for now
Arnd Bergmann
- [PATCH 21/30] sound/soc/omap: limit to omap2plus
Arnd Bergmann
- [PATCH 22/30] mfd: build twl6030 only on omap2
Arnd Bergmann
- [PATCH 23/30] ARM: omap2: select twl4030 support on boards that need it
Arnd Bergmann
- [PATCH 24/30] ARM: omap2+: ensure that one of omap2/3/4 is selected
Arnd Bergmann
- [PATCH 25/30] ARM: OMAP depends on MMU
Arnd Bergmann
- [PATCH 26/30] ARM: omap: add board autoselection
Arnd Bergmann
- [PATCH 27/30] ARM: omap: select L2X0 cache on omap4
Arnd Bergmann
- [PATCH 28/30] ARM: omap: select CPU_FREQ_TABLE where needed
Arnd Bergmann
- [PATCH 29/30] ARM: omap: select USB_ARCH_HAS_EHCI only when USB is enabled
Arnd Bergmann
- [PATCH 30/30] ARM: omap2: select ARM_AMBA for OMAP3_EMU
Arnd Bergmann
- [PATCH 00/11] Generic ARM fixes for randconfig
Arnd Bergmann
- [PATCH 16/26] ARM: pxa: CPU_PJ4 requires IWMMXT
Arnd Bergmann
- [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method
Arnd Bergmann
- [PATCH 10/30] ARM: omap/iommu: always provide iommu debug code
Arnd Bergmann
- [PATCH 21/30] sound/soc/omap: limit to omap2plus
Arnd Bergmann
- [PATCH 21/30] sound/soc/omap: limit to omap2plus
Arnd Bergmann
- [PATCH 02/26] sound/pxa-zylonite: use a valid device for dev_err()
Arnd Bergmann
- [PATCH 11/30] ARM: omap2/n8x0: work around modular omap mmc
Arnd Bergmann
- [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method
Arnd Bergmann
- [PATCH 02/26] sound/pxa-zylonite: use a valid device for dev_err()
Arnd Bergmann
- [PATCH 0/6] ASoC fixes from ARM randconfig builds
Arnd Bergmann
- [PATCH 1/6] ASoC: codecs/wm8682: use __devexit_p
Arnd Bergmann
- [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB
Arnd Bergmann
- [PATCH 3/6] ASoC: imx: eukrea_tlv320 needs i2c
Arnd Bergmann
- [PATCH 4/6] ASoC: sh: use correct __iomem annotations
Arnd Bergmann
- [PATCH 5/6] ASoC: samsung: fix Kconfig dependencies
Arnd Bergmann
- [PATCH 6/6] ASoC: samsung: add missing __devexit_p() annotations
Arnd Bergmann
- [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB
Arnd Bergmann
- [PATCH 5/6] ASoC: samsung: fix Kconfig dependencies
Arnd Bergmann
- [PATCH 4/6] ASoC: sh: use correct __iomem annotations
Arnd Bergmann
- [PATCH 26/30] ARM: omap: add board autoselection
Arnd Bergmann
- [PATCH 28/30] ARM: omap: select CPU_FREQ_TABLE where needed
Arnd Bergmann
- [PATCH 20/30] media/omap_vout: disable driver for now
Arnd Bergmann
- [PATCH 00/30] ARM/omap: omap specific randconfig fixes
Arnd Bergmann
- [PATCH] ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynos
Arnd Bergmann
- [PATCH 3/3] tty/serial: atmel_serial: __devinit_p for probe function
Arnd Bergmann
- [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method
Arnd Bergmann
- [PATCH 08/30] ARM: omap2+: fix building without i2c
Arnd Bergmann
- [PATCH 02/30] video/omap: fix dependencies
Arnd Bergmann
- [PATCH 03/30] video/omap: fix build dependencies
Arnd Bergmann
- [PATCH 26/30] ARM: omap: add board autoselection
Arnd Bergmann
- [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB
Arnd Bergmann
- [PATCH 23/30] ARM: omap2: select twl4030 support on boards that need it
Arnd Bergmann
- [alsa-devel] [PATCH 5/6] ASoC: samsung: fix Kconfig dependencies
Arnd Bergmann
- [PATCH 5/6] ASoC: samsung: wm8994 depends on mfd_wm8994
Arnd Bergmann
- [PATCH] ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynos
Arnd Bergmann
- [PATCH v3] ASoC: samsung: wm8994 depends on mfd_wm8994
Arnd Bergmann
- [alsa-devel] [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB
Arnd Bergmann
- [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro
Arnd Bergmann
- [alsa-devel] [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB
Arnd Bergmann
- [PATCH 16/26] ARM: pxa: CPU_PJ4 requires IWMMXT
Arnd Bergmann
- [PATCH 26/30] ARM: omap: add board autoselection
Arnd Bergmann
- [PATCH 22/30] mfd: build twl6030 only on omap2
Arnd Bergmann
- [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro
Arnd Bergmann
- [PATCH 26/30] ARM: omap: add board autoselection
Arnd Bergmann
- [PATCH 1/3 v3] ARM Realview PCIX map include file changes
Arnd Bergmann
- [PATCH 0/14] Sparse fixes for tegra
Arnd Bergmann
- [PATCH 08/26] ARM: pxa: move z2 to generic cpu_suspend
Arnd Bergmann
- [PATCH 11/26] ARM: pxa: allow building palm27x without pxafb
Arnd Bergmann
- [PATCH 12/26] ARM: pxa: pxa95x/saarb depends on pxa3xx code
Arnd Bergmann
- [PATCH 13/26] ARM: pxa: use correct __iomem annotations
Arnd Bergmann
- [PATCH 1/3 v3] ARM Realview PCIX map include file changes
Arnd Bergmann
- [GIT PULL] ux500-timers
Arnd Bergmann
- [PATCH 0/1] A trio of IXP425 boards
Arnd Bergmann
- ARM SoC tree: OMAP PM dependency on tip irq/core
Arnd Bergmann
- [PATCHv16 0/9] Contiguous Memory Allocator
Arnd Bergmann
- [GIT PULL] Samsung devel-2 for v3.2
Arnd Bergmann
- [GIT PULL] Samsung board-2 for v3.2
Arnd Bergmann
- [GIT PULL] Samsung cleanup-2 for v3.2
Arnd Bergmann
- ARM SoC tree: OMAP PM dependency on tip irq/core
Arnd Bergmann
- [GIT PULL] omap fixes for -rc series and merge window
Arnd Bergmann
- [GIT PULL] omap fixes for -rc series and merge window
Arnd Bergmann
- ARM SoC tree: OMAP PM dependency on tip irq/core
Arnd Bergmann
- [PULL] i.MX
Arnd Bergmann
- [GIT PULL] DEBUG_LL platform updates for 3.2
Arnd Bergmann
- [GIT PULL] ARM: CSR: l2x0 init cleanup for 3.2
Arnd Bergmann
- [GIT PULL] ARM: CSR: cleanup some minor coding-style issues for 3.2
Arnd Bergmann
- [PATCH 20/26] ARM: pxa: select FB_PXA on saar and tevorevb
Arnd Bergmann
- Question about "Inconsistent kallsyms data"
Arnd Bergmann
- [PATCH 08/26] ARM: pxa: move z2 to generic cpu_suspend
Arnd Bergmann
- [PATCH v2] pinmux: add a driver for the CSR SiRFprimaII pinmux
Arnd Bergmann
- [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa
Arnd Bergmann
- [PATCH] ARM: kprobes: work around build errors
Arnd Bergmann
- [PULL] i.MX
Arnd Bergmann
- [PATCH 1/3] ARM: imx: always select CACHE_L2X0 on i.MX3
Arnd Bergmann
- [PATCH 2/3] ARM: imx: add missing include of linux/ftrace.h
Arnd Bergmann
- [PATCH 3/7] ARM: imx: export imx_ioremap
Arnd Bergmann
- [PATCH] ARM: omap2+: stub out omap*_volt_data
Arnd Bergmann
- [GIT PULL] final arm-soc fixes for 3.1
Arnd Bergmann
- [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa
Arnd Bergmann
- [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa
Arnd Bergmann
- [GIT PULL] DEBUG_LL platform updates for 3.2
Arnd Bergmann
- [PATCH v2 00/14] Sparse fixes for tegra
Arnd Bergmann
- [GIT PULL] DEBUG_LL platform updates for 3.2
Arnd Bergmann
- [PATCHv16 0/9] Contiguous Memory Allocator
Arnd Bergmann
- [PATCH] ARM: omap2+: stub out omap*_volt_data
Arnd Bergmann
- [PATCH 8/9] ARM: SPMP8000: Add support for the Letcool board
Arnd Bergmann
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Arnd Bergmann
- [PATCH 2/9] ARM: SPMP8000: Add machine base files
Arnd Bergmann
- Add support for the SPMP8000 SoC and Letcool board
Arnd Bergmann
- [PATCH 8/9] ARM: SPMP8000: Add support for the Letcool board
Arnd Bergmann
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Arnd Bergmann
- [RFC PATCH] tty/serial: RS485 bindings for device tree
Arnd Bergmann
- [GIT PULL] DEBUG_LL platform updates for 3.2
Arnd Bergmann
- [PATCH v3 6/7] ARM: pxa: move gpio-pxa.h into include directory
Arnd Bergmann
- [GIT PULL] DEBUG_LL platform updates for 3.2
Arnd Bergmann
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Arnd Bergmann
- [GIT PULL] DEBUG_LL platform updates for 3.2
Arnd Bergmann
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Arnd Bergmann
- [GIT PULL] Please pull tegra cleanups for 3.2
Arnd Bergmann
- [PATCH v4 8/8] ARM: pxa: move macros into gpio-pxa.c
Arnd Bergmann
- [PATCH v5 00/10] Per SoC descriptor
Arnd Bergmann
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Arnd Bergmann
- [PATCH v4 8/8] ARM: pxa: move macros into gpio-pxa.c
Arnd Bergmann
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Arnd Bergmann
- [PATCH] ARM: mutually exclude ZBOOT_ROM and AUTO_ZRELADDR
Arnd Bergmann
- [PATCHv16 0/9] Contiguous Memory Allocator
Arnd Bergmann
- [PATCH 2/9] ARM: SPMP8000: Add machine base files
Arnd Bergmann
- READ THIS: the next mach-types update
Arnd Bergmann
- [PATCH 2/9] ARM: SPMP8000: Add machine base files
Arnd Bergmann
- [RFC] clocktree representation in the devicetree
Arnd Bergmann
- [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver
Arnd Bergmann
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Arnd Bergmann
- [PATCH v6 0/2] Add device tree support for i.mx51/53 boards
Arnd Bergmann
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Arnd Bergmann
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Arnd Bergmann
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Arnd Bergmann
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Arnd Bergmann
- [PATCH 2/3] ARM: Add static kernel function stack size analyzer, for ARM
Arnd Bergmann
- [PATCH 0/3] ARM 4Kstacks: introduction
Arnd Bergmann
- [PATCH v2 1/5] ARM: SPMP8000: Add machine base files
Arnd Bergmann
- [PATCH 3/3] ARM 4Kstacks: Decrease poll and select stack usage, when using 4K stacks
Arnd Bergmann
- [GIT PULL] Samsung devel-2 for v3.2
Arnd Bergmann
- [GIT PULL] Please pull tegra cleanups for 3.2
Arnd Bergmann
- [GIT PULL] GIC DT binding support
Arnd Bergmann
- [GIT PULL] Calxeda Highbank platform support
Arnd Bergmann
- [GIT PULL] i.MX features
Arnd Bergmann
- [GIT PULL] DEBUG_LL platform updates for 3.2
Arnd Bergmann
- [GIT PULL] GIC DT binding support
Arnd Bergmann
- [GIT PULL] Please pull tegra feature branch for 3.2
Arnd Bergmann
- [GIT PULL] Samsung cleanup-3 for v3.2
Arnd Bergmann
- [GIT PULL] Samsung devel-3 for v3.2
Arnd Bergmann
- [GIT PULL] at91: driver for Atmel true hardware random number generator
Arnd Bergmann
- [GIT PULL] i.MX cleanup patches
Arnd Bergmann
- [GIT PULL] GIC DT binding support
Arnd Bergmann
- [GIT PULL] GIC DT binding support
Arnd Bergmann
- [GIT PULL] i.MX6Q support
Arnd Bergmann
- [GIT PULL] GIC DT binding support
Arnd Bergmann
- [PATCH arm-soc.git/for-next] ARM: l2x0: Fix merge typo with "ARM: l2x0: add empty l2x0_of_init"
Arnd Bergmann
- [GIT PULL] DEBUG_LL platform updates for 3.2
Arnd Bergmann
- [PATCH] arm/imx: add missing include of asm/exception.h for avic.c
Arnd Bergmann
- [GIT PULL] GIC DT binding support
Arnd Bergmann
- [PATCH v2 1/5] ARM: SPMP8000: Add machine base files
Arnd Bergmann
- [GIT PULL] ARM: CSR: l2x0 init cleanup for 3.2
Arnd Bergmann
- [GIT PULL] i.MX5 devicetree support
Arnd Bergmann
- [GIT PULL] assorted i.MX fixes
Arnd Bergmann
- [GIT PULL] at91 device tree basics
Arnd Bergmann
- [GIT PULL] pxa: feature patches for next
Arnd Bergmann
- [GIT PULL] pxa: fixes for next
Arnd Bergmann
- [GIT PULL] GIC DT binding support
Arnd Bergmann
- [GIT PULL] i.MX6Q support
Arnd Bergmann
- [GIT PULL] pending DT patches and cleanup for map_io for v3.2 merge window
Arnd Bergmann
- [GIT PULL] GIC DT binding support
Arnd Bergmann
- Anyone used KDB single-stepping on ARM
Tim Bird
- [PATCH 0/3] ARM 4Kstacks: introduction
Tim Bird
- [PATCH 1/3] ARM 4Kstacks: Add support for 4K kernel stacks to ARM
Tim Bird
- [PATCH 2/3] ARM: Add static kernel function stack size analyzer, for ARM
Tim Bird
- [PATCH 3/3] ARM 4Kstacks: Decrease poll and select stack usage, when using 4K stacks
Tim Bird
- [PATCH 0/3] ARM 4Kstacks: introduction
Tim Bird
- [PATCH 0/3] ARM 4Kstacks: introduction
Tim Bird
- [PATCH 0/3] ARM 4Kstacks: introduction
Tim Bird
- [PATCH 0/3] ARM 4Kstacks: introduction
Tim Bird
- [PATCH 0/3] ARM 4Kstacks: introduction
Tim Bird
- [PATCH] Shrink thread_info a bit
Tim Bird
- [PATCH 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
Rajeshwari Birje
- [PATCH V3 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
Rajeshwari Birje
- [PATCH V4 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
Rajeshwari Birje
- [PATCH V4 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
Rajeshwari Birje
- [PATCH V5 1/3] SDHCI: S3C: Use generic clock names for sdhci bus clock options
Rajeshwari Birje
- [PATCH 14/26] mtd: nand_h1900 never worked
Artem Bityutskiy
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Segher Boessenkool
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Segher Boessenkool
- [PATCH] of: Add a reg-names property to name reg entries
Segher Boessenkool
- [PATCH] of: Add a reg-names property to name reg entries
Segher Boessenkool
- [PATCH] of: Add a reg-names property to name reg entries
Segher Boessenkool
- [PATCH] ARM: mm: Align bank start to MAX_ORDER_NR_PAGES
Michael Bohan
- [PATCH] ARM imx51: Add Armadeus systems APF51 support
Julien Boibessot
- [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage
Julien Boibessot
- [PATCH] [TRIVIAL] ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT'
Paul Bolle
- [PATCH 11/21] ARM: drop unused Kconfig symbols
Paul Bolle
- [PATCH] [RESEND] [TRIVIAL] ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT'
Paul Bolle
- config ARCH_AT91SAM9X5
Paul Bolle
- [PATCHv2 0/2] Update MSM DEBUG_LL support
Stephen Boyd
- [PATCHv2 1/2] msm: Consolidate and move DEBUG_LL to generic ARM Kconfig
Stephen Boyd
- [PATCHv2 2/2] msm: Support DEBUG_LL on MSM8660 and MSM8960
Stephen Boyd
- [PATCHv2] msm: boards: Fix fallout from removal of machine_desc in fixup
Stephen Boyd
- [PATCH] hvc_dcc: Fix duplicate character inputs
Stephen Boyd
- [RFC] Shrink sched_clock some more
Stephen Boyd
- [PATCH 05/16] dmaengine: pl330: Enable module alias autogeneration for AMBA drivers
Jassi Brar
- [PATCHv2] msm: boards: Fix fallout from removal of machine_desc in fixup
David Brown
- [PATCHv2] msm: boards: Fix fallout from removal of machine_desc in fixup
David Brown
- [PATCH 02/26] sound/pxa-zylonite: use a valid device for dev_err()
Mark Brown
- [PATCH 02/26] sound/pxa-zylonite: use a valid device for dev_err()
Mark Brown
- [PATCH 02/26] sound/pxa-zylonite: use a valid device for dev_err()
Mark Brown
- [PATCH 21/30] sound/soc/omap: limit to omap2plus
Mark Brown
- [PATCH 01/30] sound/omap: omap_mcpdm_remove cannot be __devexit
Mark Brown
- [GIT PULL] Samsung devel-2 for v3.2
Mark Brown
- [PATCH 1/6] ASoC: codecs/wm8682: use __devexit_p
Mark Brown
- [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB
Mark Brown
- [PATCH 5/6] ASoC: samsung: fix Kconfig dependencies
Mark Brown
- [PATCH 6/6] ASoC: samsung: add missing __devexit_p() annotations
Mark Brown
- [PATCH 3/6] ASoC: imx: eukrea_tlv320 needs i2c
Mark Brown
- [PATCH 4/6] ASoC: sh: use correct __iomem annotations
Mark Brown
- [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB
Mark Brown
- [PATCH 5/6] ASoC: samsung: fix Kconfig dependencies
Mark Brown
- [GIT PULL] Samsung devel-2 for v3.2
Mark Brown
- [alsa-devel] [PATCH 5/6] ASoC: samsung: fix Kconfig dependencies
Mark Brown
- [GIT PULL] Samsung devel-2 for v3.2
Mark Brown
- [PATCH 5/6] ASoC: samsung: wm8994 depends on mfd_wm8994
Mark Brown
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Mark Brown
- [alsa-devel] [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB
Mark Brown
- [PATCH v3] ASoC: samsung: wm8994 depends on mfd_wm8994
Mark Brown
- [alsa-devel] [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB
Mark Brown
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Mark Brown
- [alsa-devel] [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB
Mark Brown
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Mark Brown
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Mark Brown
- [GIT PULL] Samsung devel-2 for v3.2
Mark Brown
- [PATCH v2 6/7] clk: Add initial WM831x clock driver
Mark Brown
- [GIT PULL] Samsung devel-2 for v3.2
Mark Brown
- [GIT PULL] Samsung devel-2 for v3.2
Mark Brown
- [PATCH 2/2] hw_random: add driver for atmel true hardware random number generator
Mark Brown
- [GIT PULL] Samsung devel-2 for v3.2
Mark Brown
- [PATCH 1/5] drivercore: add new error value for deferred probe
Mark Brown
- Long stalls during boot with -next
Mark Brown
- Long stalls during boot with -next
Mark Brown
- [GIT PULL] Samsung devel-2 for v3.2
Mark Brown
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Mark Brown
- [PATCH] ARM: S3C64XX: Enable TCM support
Mark Brown
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Mark Brown
- [PATCH] ARM: S3C64XX: Enable TCM support
Mark Brown
- [PATCH v2 1/5] regulator: twl: Remove hardcoded board constraints from driver
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 5/5] regulator: map consumer regulator based on device tree
Mark Brown
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Mark Brown
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Mark Brown
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Mark Brown
- [PATCH] ARM imx51: Add Armadeus systems APF51 support
Mark Brown
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Mark Brown
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Mark Brown
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Mark Brown
- [PATCH v2 5/5] regulator: map consumer regulator based on device tree
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Mark Brown
- [PATCH] MANITAINERS: Add Cragganmore reference platform to Wolfson support
Mark Brown
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Mark Brown
- [PATCH 3/9] ARM: SPMP8000: Add clk support
Mark Brown
- [PATCH] gpio/samsung: Complain loudly if we don't know the SoC
Mark Brown
- [PATCH] SAMSUNG: S3C64XX: Fix SoC identification for S3C64xx devices
Mark Brown
- [PATCH 1/2] gpio/samsung: Explicitly index samsung_gpio_cfgs
Mark Brown
- [PATCH 2/2] gpio/samsung: Fix typo in comment
Mark Brown
- [PATCH] gpio/samsung: Complain loudly if we don't know the SoC
Mark Brown
- [PATCH v2] gpio/samsung: Complain loudly if we don't know the SoC
Mark Brown
- [PATCH] regulator: max8649 Convert max8649 to user regmap api
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.
Mark Brown
- Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2] regulator: max8649 Convert max8649 to use regmap api
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h
Mark Brown
- [PATCH] drivers: create a pin control subsystem v8
Mark Brown
- [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h
Mark Brown
- [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h
Mark Brown
- [PATCH] regulator: Use regmap_read/write(), regmap_update_bits functions directly
Mark Brown
- [PATCH v3 1/4] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH 1/3] regulator: twl: adapt twl-regulator driver to dt
Mark Brown
- [PATCH 2/3] omap4: sdp: Pass regulator data from dt
Mark Brown
- [PATCH v3 0/4] Device tree support for regulators
Mark Brown
- [PATCH v3 1/4] regulator: helper routine to extract regulator_init_data
Mark Brown
- [PATCH v3 2/4] regulator: adapt fixed regulator driver to dt
Mark Brown
- [PATCH v3 3/4] regulator: pass additional of_node to regulator_register()
Mark Brown
- [PATCH v3 4/4] regulator: map consumer regulator based on device tree
Mark Brown
- [PATCH 1/3 v3.1] ARM: S3C64XX: Update for conversion to SAMSUNG_GPIO_EXTRA
Mark Brown
- [PATCH 2/3 v3.1] ARM: SAMSUNG: Fix GPIO space reservation for S3C64xx platforms
Mark Brown
- [PATCH 3/3 v3.1] ARM: S3C64XX: Correct reservation of GPIOs for CPU module on Cragganmore
Mark Brown
- [PATCH] regulator: Use regmap_read/write(), regmap_update_bits functions directly
Mark Brown
- [PATCH v2] regulator: max8649 Convert max8649 to use regmap api
Mark Brown
- [PATCH 1/1] ARM: i.MX28: shift frac value in _CLK_SET_RATE
Matt Burtch
- [ resend PATCH 1/1] ARM: i.MX28: shift frac value in _CLK_SET_RATE
Matt Burtch
- [ v2 resend PATCH 1/1] ARM: i.MX28: shift frac value in _CLK_SET_RATE
Matt Burtch
- [ resend PATCH 1/1] ARM: i.MX28: shift frac value in _CLK_SET_RATE
Matt Burtch
- [PATCH] OMAP: iommu flush page table entries from L1 and L2 cache
C.A, Subramaniam
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Jonathan Cameron
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Jonathan Cameron
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Jonathan Cameron
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Jonathan Cameron
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Jonathan Cameron
- [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.
Jonathan Cameron
- [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.
Jonathan Cameron
- [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.
Jonathan Cameron
- Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011
Jonathan Cameron
- Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011
Jonathan Cameron
- [PATCH 0/3] ARM 4Kstacks: introduction
Dave Chinner
- [PATCH 0/3] ARM 4Kstacks: introduction
Dave Chinner
- [PATCH 0/3] ARM 4Kstacks: introduction
Dave Chinner
- [PATCH v3 RE-SEND 2/2] iommu/exynos: Add iommu driver for Exynos Platforms
KyongHo Cho
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
KyongHo Cho
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
KyongHo Cho
- [PATCH v4 0/2] iommu/exynos: Add IOMMU and Enhance System MMU driver for Exynos4
KyongHo Cho
- [PATCH v4 1/2] ARM: EXYNOS4: Change System MMU device definition
KyongHo Cho
- [PATCH v4 2/2] iommu/exynos: Add iommu driver for Exynos Platforms
KyongHo Cho
- [PATCH v4 2/2] iommu/exynos: Add iommu driver for Exynos Platforms
KyongHo Cho
- [PATCH v5 0/2] iommu/exynos: Add IOMMU and Enhance System MMU driver for Exynos4
KyongHo Cho
- [PATCH v5 1/2] ARM: EXYNOS4: Change System MMU device definition
KyongHo Cho
- [PATCH v5 2/2] iommu/exynos: Add iommu driver for Exynos Platforms
KyongHo Cho
- [PATCH v5 2/2] iommu/exynos: Add iommu driver for Exynos Platforms
KyongHo Cho
- [PATCH v5 2/2] iommu/exynos: Add iommu driver for Exynos Platforms
KyongHo Cho
- [PATCH 1/4] ARM: EXYNOS4: Support for generic I/O power domains on EXYNOS4210
Chanwoo Choi
- [PATCH 4/4] ARM: EXYNOS4: Add power domain to use generic Power domain Framework
Chanwoo Choi
- [PATCH 2/4] ARM: EXYNOS4: Support for generic Clock manipulation PM callbacks
Chanwoo Choi
- [PATCH 0/3 v3] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4 series
Chanwoo Choi
- [PATCH 1/3 v3] ARM: EXYNOS4: Support for generic I/O power domains on EXYNOS4210/4212
Chanwoo Choi
- [PATCH 2/3 v3] ARM: EXYNOS4: Use generic power domain on EXYNOS4210/4212
Chanwoo Choi
- [PATCH 3/3 v3] ARM: EXYNOS4: Delete the power domain code depend on samsung SoC
Chanwoo Choi
- [PATCH] arm: mm: Fix infinite looping issue
Hyok S. Choi
- [Linaro-mm-sig] [PATCHv16 0/9] Contiguous Memory Allocator
Clark, Rob
- [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism
Rob Clark
- [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism
Rob Clark
- [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism
Rob Clark
- [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism
Rob Clark
- [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism
Rob Clark
- [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.
Lars-Peter Clausen
- [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.
Lars-Peter Clausen
- [PATCH 0/1] A trio of IXP425 boards
Richard Cochran
- [Linaro-mm-sig] [PATCHv16 0/9] Contiguous Memory Allocator
Maxime Coquelin
- [Linaro-mm-sig] [PATCHv16 0/9] Contiguous Memory Allocator
Maxime Coquelin
- [Linaro-mm-sig] [PATCHv16 0/9] Contiguous Memory Allocator
Maxime Coquelin
- [PATCH] fixup: mm: alloc_contig_range: increase min_free_kbytes during allocation
Maxime Coquelin
- select consuming too much cpu time when changing from kernel 2.6.29 to 2.6.34
Werner Cornelius
- select consuming too much cpu time when changing from kernel 2.6.29 to 2.6.34
Werner Cornelius
- [PATCH 1/1] ARM: Make debug UART optional for S3C devices
Thiago A. Correa
- [PATCH 1/1] ARM: Make debug UART optional for S3C devices
Thiago A. Corrêa
- [PATCH 26/30] ARM: omap: add board autoselection
Cousson, Benoit
- [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader
Cousson, Benoit
- [PATCH v16 00/12] OMAP: dmtimer: adaptation to platform_driver
Cousson, Benoit
- [PATCH 0/2] ARM: OMAP2+: timer fixes / cleanup
Benoit Cousson
- [PATCH 1/2] ARM: OMAP2+: clock data: Remove redundant timer clkdev
Benoit Cousson
- [PATCH 2/2] ARM: OMAP2+: timer: Remove omap_device_pm_latency
Benoit Cousson
- [PATCH 0/2] ARM: OMAP2+: timer fixes / cleanup
Cousson, Benoit
- [RFC 2/5] ARM: OMAP: omap_device: add a method to set iommu private archdata
Cousson, Benoit
- [PATCH v2 6/6] OMAP4: Clock: Correct the name of SLIMBUS interface clocks
Cousson, Benoit
- [PATCH v2 6/6] OMAP4: Clock: Correct the name of SLIMBUS interface clocks
Cousson, Benoit
- [PATCH 0/2] ARM: OMAP2+: timer fixes / cleanup
Cousson, Benoit
- [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod
Cousson, Benoit
- [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod
Cousson, Benoit
- [PATCH v2 6/6] OMAP4: Clock: Correct the name of SLIMBUS interface clocks
Cousson, Benoit
- [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod
Cousson, Benoit
- [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod
Cousson, Benoit
- [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod
Cousson, Benoit
- [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod
Cousson, Benoit
- [PATCH] of: Add a reg-names property to name reg entries
Benoit Cousson
- [PATCH] of: Add a reg-names property to name reg entries
Cousson, Benoit
- [PATCH] of: Add a reg-names property to name reg entries
Cousson, Benoit
- [PATCH] of: Add a reg-names property to name reg entries
Cousson, Benoit
- [PATCH] of: Add a reg-names property to name reg entries
Cousson, Benoit
- [PATCH 4/5] gpiolib: handle deferral probe error
Alan Cox
- [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers
Alan Cox
- [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers
Alan Cox
- [PATCH v2] UART: add CSR SiRFprimaII SoC on-chip uart drivers
Alan Cox
- [PATCH] MAINTAINERS: Update tegra maintainer information
Colin Cross
- [PATCH] [3.3] ARM: tegra: emc: max rate based on emc table
Colin Cross
- [PATCH] [3.3] ARM: tegra: use APB DMA for accessing APB devices
Colin Cross
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
David Daney
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
David Daney
- parallel load of modules on an ARM multicore
George G. Davis
- [RFC/PATCH 7/7] ARM: ARM11 MPCore: cpu_v6_set_pte_ext is not preempt safe
George G. Davis
- [RFC/PATCH 1/7] ARM: ARM11 MPCore: pgd_alloc is not preempt safe
George G. Davis
- [RFC/PATCH 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe
George G. Davis
- [RFC/PATCH 2/7] ARM: ARM11 MPCore: pte_alloc_one{, _kernel} are not preempt safe
George G. Davis
- [RFC/PATCH 3/7] ARM: ARM11 MPCore: {clean, flush}_pmd_entry are not preempt safe
George G. Davis
- [RFC/PATCH 3/7] ARM: ARM11 MPCore: {clean, flush}_pmd_entry are not preempt safe
George G. Davis
- [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>
George G. Davis
- [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>
George G. Davis
- [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>
George G. Davis
- [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>
George G. Davis
- [RFC/PATCH v4 4/7] ARM: ARM11 MPCore: clean_dcache_area is not preempt safe
George G. Davis
- [RFC/PATCH v4 4/7] ARM: ARM11 MPCore: clean_dcache_area is not preempt safe
George G. Davis
- [RFC/PATCH v4 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe
George G. Davis
- [RFC/PATCH v4 7/7] ARM: ARM11 MPCore: cpu_v6_set_pte_ext is not preempt safe
George G. Davis
- parallel load of modules on an ARM multicore
George G. Davis
- [GIT PULL] DEBUG_LL platform updates for 3.2
Will Deacon
- [RFC] Need help deciphering reboot modes!
Will Deacon
- [PATCH] ARM: hw_breakpoint: skip v7-specific reset on v6 cores
Will Deacon
- [PATCH 5/7] ARM: EXYNOS4: Add support external GIC
Will Deacon
- [GIT PULL] DEBUG_LL platform updates for 3.2
Will Deacon
- [PATCH 2/3] ARM: plat-samsung: use Kconfig choice for debug UART selection
Will Deacon
- [GIT PULL] DEBUG_LL platform updates for 3.2
Will Deacon
- [PATCH 2/3] ARM: plat-samsung: use Kconfig choice for debug UART selection
Will Deacon
- [GIT PULL] DEBUG_LL platform updates for 3.2
Will Deacon
- [GIT PULL] DEBUG_LL platform updates for 3.2
Will Deacon
- [GIT PULL] DEBUG_LL platform updates for 3.2
Will Deacon
- [GIT PULL] DEBUG_LL platform updates for 3.2
Will Deacon
- [PATCH 5/7] ARM: EXYNOS4: Add support external GIC
Will Deacon
- Warning in -next w/ "ARM: 7011/1: Add ARM cpu topology definition"
Will Deacon
- [PATCH] ARM: cpu topology: fix warning
Will Deacon
- [GIT PULL] DEBUG_LL platform updates for 3.2
Will Deacon
- Possible regression in kexec on ARM ARMv6 and ARMv7 cores
Will Deacon
- Possible regression in kexec on ARM ARMv6 and ARMv7 cores
Will Deacon
- Possible regression in kexec on ARM ARMv6 and ARMv7 cores
Will Deacon
- [GIT PULL] DEBUG_LL platform updates for 3.2
Will Deacon
- [GIT PULL] DEBUG_LL platform updates for 3.2
Will Deacon
- [PATCH] Shrink thread_info a bit
Will Deacon
- Perf support for OMAP4
Will Deacon
- [PATCH v5 3/7] arm: perf: support device with other non-irq resources
Will Deacon
- [PATCH v5 3/7] arm: perf: support device with other non-irq resources
Will Deacon
- [PATCH v2 2/8] ARM: smp: populate logical CPU mapping during boot
Will Deacon
- [PATCH/RFT 0/12] step towards removal of mach/system.h
Will Deacon
- [PATCH] Shrink thread_info a bit
Will Deacon
- [PATCH 00/51] Remove inline arch_reset definitions from system.h
Will Deacon
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Will Deacon
- [PATCH 02/51] ARM: mach-at91: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 03/51] ARM: bcmring: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 04/51] ARM: mach-clps711x: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 05/51] ARM: cns3xxx: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 06/51] ARM: mach-davinci: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 07/51] ARM: mach-dove: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 08/51] ARM: mach-ebsa110: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 09/51] ARM: mach-ep93xx: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 10/51] ARM: mach-footbridge: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 11/51] ARM: mach-gemini: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 12/51] ARM: mach-h720x: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 13/51] ARM: mach-integrator: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 14/51] ARM: mach-iop13xx: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 15/51] ARM: mach-iop32x: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 16/51] ARM: mach-iop33x: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 17/51] ARM: OMAP: convert reset to use arm_arch_reset
Will Deacon
- [PATCH 18/51] ARM: mach-ixp2000: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 19/51] ARM: mach-ixp23xx: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 20/51] ARM: mach-ixp4xx: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 21/51] ARM: mach-kirkwood: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 22/51] ARM: mach-ks8695: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 23/51] ARM: mach-lpc32xx: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 24/51] ARM: mach-mmp: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 25/51] ARM: mach-mv78xx0: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 26/51] ARM: mach-msm: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 27/51] ARM: mach-mxs: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 28/51] ARM: mach-netx: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 29/51] ARM: mach-nomadik: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 30/51] ARM: mach-nuc93x: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 31/51] ARM: mach-orion5x: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 32/51] ARM: mach-pnx4008: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 33/51] ARM: mach-prima2: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 34/51] ARM: mach-pxa: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 35/51] ARM: mach-realview: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 36/51] ARM: mach-rpc: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 37/51] ARM: mach-s3c64xx: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 38/51] ARM: mach-sa1100: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 39/51] ARM: mach-shark: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 40/51] ARM: mach-shmobile: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 41/51] ARM: mach-tegra: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 42/51] ARM: mach-u300: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 43/51] ARM: mach-versatile: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 44/51] ARM: mach-vt8500: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 45/51] ARM: mach-w90x900: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 46/51] ARM: plat-spear: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 47/51] ARM: plat-tcc: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 48/51] ARM: plat-s5p: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 49/51] ARM: plat-mxc: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 50/51] ARM: plat-s3c24xx: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 51/51] ARM: reset: remove empty arch_reset definitions
Will Deacon
- [PATCH 3/6] arm/tegra: prepare early init for multiple tegra variants
Will Deacon
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Will Deacon
- [PATCH 33/51] ARM: mach-prima2: use arm_arch_reset instead of arch_reset
Will Deacon
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Will Deacon
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Will Deacon
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Will Deacon
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Will Deacon
- [PATCH v8 00/24] gpio/omap: driver cleanup and fixes
Tarun Kanti DebBarma
- [PATCH v8 01/24] gpio/omap: remove dependency on gpio_bank_count
Tarun Kanti DebBarma
- [PATCH v8 02/24] gpio/omap: use flag to identify wakeup domain
Tarun Kanti DebBarma
- [PATCH v8 03/24] gpio/omap: make gpio_context part of gpio_bank structure
Tarun Kanti DebBarma
- [PATCH v8 04/24] gpio/omap: handle save/restore context in GPIO driver
Tarun Kanti DebBarma
- [PATCH v8 05/24] gpio/omap: make non-wakeup GPIO part of pdata
Tarun Kanti DebBarma
- [PATCH v8 06/24] gpio/omap: avoid cpu checks during module ena/disable
Tarun Kanti DebBarma
- [PATCH v8 07/24] gpio/omap: further cleanup using wkup_en register
Tarun Kanti DebBarma
- [PATCH v8 08/24] gpio/omap: use level/edge detect reg offsets
Tarun Kanti DebBarma
- [PATCH v8 09/24] gpio/omap: remove hardcoded offsets in context save/restore
Tarun Kanti DebBarma
- [PATCH v8 10/24] gpio/omap: cleanup set_gpio_triggering function
Tarun Kanti DebBarma
- [PATCH v8 11/24] gpio/omap: cleanup omap_gpio_mod_init function
Tarun Kanti DebBarma
- [PATCH v8 12/24] gpio/omap: use pinctrl offset instead of macro
Tarun Kanti DebBarma
- [PATCH v8 13/24] gpio/omap: remove unnecessary bit-masking for read access
Tarun Kanti DebBarma
- [PATCH v8 14/24] gpio/omap: remove bank->method & METHOD_* macros
Tarun Kanti DebBarma
- [PATCH v8 15/24] gpio/omap: fix bankwidth for OMAP7xx MPUIO
Tarun Kanti DebBarma
- [PATCH v8 16/24] gpio/omap: use pm-runtime framework
Tarun Kanti DebBarma
- [PATCH v8 17/24] gpio/omap: fix debounce clock handling
Tarun Kanti DebBarma
- [PATCH v8 18/24] gpio/omap: optimize suspend and resume functions
Tarun Kanti DebBarma
- [PATCH v8 19/24] gpio/omap: cleanup prepare_for_idle and resume_after_idle
Tarun Kanti DebBarma
- [PATCH v8 20/24] gpio/omap: remove omap_gpio_save_context overhead
Tarun Kanti DebBarma
- [PATCH v8 21/24] gpio/omap: save and restore debounce registers
Tarun Kanti DebBarma
- [PATCH v8 22/24] gpio/omap: enable irq at the end of all configuration in restore
Tarun Kanti DebBarma
- [PATCH v8 23/24] gpio/omap: restore OE only after setting the output level
Tarun Kanti DebBarma
- [PATCH v8 24/24] gpio/omap: handle set_dataout reg capable IP on restore
Tarun Kanti DebBarma
- [PATCH 0/2] ARM: OMAP2+: timer fixes / cleanup
DebBarma, Tarun Kanti
- [PATCH 0/2] ARM: OMAP2+: timer fixes / cleanup
DebBarma, Tarun Kanti
- [PATCH v8 REPOST 17/24] gpio/omap: fix debounce clock handling
Tarun Kanti DebBarma
- [PATCH v8 REPOST 21/24] gpio/omap: save and restore debounce registers
Tarun Kanti DebBarma
- Add support for the SPMP8000 SoC and Letcool board
Zoltan Devai
- [PATCH 1/9] ARM: vic: Don't write to the read-only register VIC_IRQ_STATUS
Zoltan Devai
- [PATCH 2/9] ARM: SPMP8000: Add machine base files
Zoltan Devai
- [PATCH 3/9] ARM: SPMP8000: Add clk support
Zoltan Devai
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Zoltan Devai
- [PATCH 5/9] ARM: SPMP8000: Add pinmux driver
Zoltan Devai
- [PATCH 6/9] ARM: SPMP8000: Add pwm driver
Zoltan Devai
- [PATCH 7/9] ARM: SPMP8000: Add dts file of SPMP8000 SoC and Letcool board
Zoltan Devai
- [PATCH 8/9] ARM: SPMP8000: Add support for the Letcool board
Zoltan Devai
- [PATCH 9/9] ARM: SPMP8000: Add Kconfig and Makefile entries to build the machine
Zoltan Devai
- [PATCH 2/9] ARM: SPMP8000: Add machine base files
Zoltan Devai
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Zoltan Devai
- Add support for the SPMP8000 SoC and Letcool board
Zoltan Devai
- [PATCH 1/9] ARM: vic: Don't write to the read-only register VIC_IRQ_STATUS
Zoltan Devai
- [PATCH 8/9] ARM: SPMP8000: Add support for the Letcool board
Zoltan Devai
- [PATCH 2/9] ARM: SPMP8000: Add machine base files
Zoltan Devai
- [PATCH 3/9] ARM: SPMP8000: Add clk support
Zoltan Devai
- [PATCH v2 1/5] ARM: SPMP8000: Add machine base files
Zoltan Devai
- [PATCH v2 2/5] ARM: SPMP8000: Add clk support
Zoltan Devai
- [PATCH v2 3/5] ARM: SPMP8000: Add clocksource and clockevent drivers
Zoltan Devai
- [PATCH v2 4/5] ARM: SPMP8000: Add SPMP8000 SoC and Letcool board dts descriptions
Zoltan Devai
- [PATCH v2 5/5] ARM: SPMP8000: Add Kconfig and Makefile entries
Zoltan Devai
- [PATCH v2 0/5] ARM: Add support for the SPMP8000 SoC and Letcool board v2
Zoltan Devai
- [RFC][PATCH] uncompress.h cleanup and DT support
Zoltan Devai
- [RFC][PATCH] uncompress.h cleanup and DT support
Zoltan Devai
- [RFC PATCH 01/15] ARM: uncompress.h: Remove unused arch_decomp_wdog defines
Zoltan Devai
- [RFC PATCH 02/15] ARM: uncompress: Remove unused definition of ARCH_HAS_DECOMP_WATCHDOG
Zoltan Devai
- [RFC PATCH 03/15] ARM: uncompress.h: Introduce ARCH_HAVE_DECOMP_SETUP
Zoltan Devai
- [RFC PATCH 04/15] ARM: uncompress: Only call arch_decomp_setup when needed
Zoltan Devai
- [RFC PATCH 05/15] ARM: uncompress.h: Remove unused arch_decomp_setup declarations
Zoltan Devai
- [RFC PATCH 06/15] ARM: uncompress: Remove unused Trace functions
Zoltan Devai
- [RFC PATCH 07/15] ARM: uncompress: Move decompressing related stuff to decompress.c
Zoltan Devai
- [RFC PATCH 08/15] ARM: uncompress: Rename misc.c to print.c
Zoltan Devai
- [RFC PATCH 09/15] ARM: uncompress: Introduce ucuart as low-level serial port driver
Zoltan Devai
- [RFC PATCH 10/15] ARM: uncompress.h: Convert machines to use the new ucuart driver
Zoltan Devai
- [RFC PATCH 11/15] ARM: uncompress: Call arch_decomp_setup by default
Zoltan Devai
- [RFC PATCH 12/15] ARM: uncompress.h: make the ucuart driver the default implementation
Zoltan Devai
- [RFC PATCH 13/15] ARM: uncompress.h: Cleanup header guards and banners
Zoltan Devai
- [RFC PATCH 14/15] ARM: uncompress: Get decompress UART info from DT
Zoltan Devai
- [RFC PATCH 15/15] ARM: uncompress: Add documentation
Zoltan Devai
- [RFC][PATCH] uncompress.h cleanup and DT support
Zoltan Devai
- [RFC][PATCH] uncompress.h cleanup and DT support
Zoltan Devai
- [PATCH v2 1/5] ARM: SPMP8000: Add machine base files
Zoltan Devai
- [PATCH v2 1/5] ARM: SPMP8000: Add machine base files
Zoltan Devai
- Advertising on your site
Frank Dewitt
- [PATCH V8 0/4] cpuidle: Global registration of idle states with per-cpu statistics
Deepthi Dharwar
- [PATCH V8 1/4] cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state
Deepthi Dharwar
- [PATCH V8 2/4] cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()
Deepthi Dharwar
- [PATCH V8 3/4] cpuidle: Split cpuidle_state structure and move per-cpu statistics fields
Deepthi Dharwar
- [PATCH V8 4/4] cpuidle: Single/Global registration of idle states
Deepthi Dharwar
- [PATCH v9 0/4] cpuidle: Global registration of idle states with per-cpu statistics
Deepthi Dharwar
- [PATCH v9 1/4] cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state
Deepthi Dharwar
- [PATCH v9 2/4] cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()
Deepthi Dharwar
- [PATCH v9 3/4] cpuidle: Split cpuidle_state structure and move per-cpu statistics fields
Deepthi Dharwar
- [PATCH v9 4/4] cpuidle: Single/Global registration of idle states
Deepthi Dharwar
- [PATCH v9 2/4] cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()
Deepthi Dharwar
- [PATCH] arm/tegra: Add device-tree support for TrimSlice board
Marc Dietrich
- [PATCH 3/3] arm/dt: tegra: add dts file for paz00
Marc Dietrich
- [PATCH 3/3] arm/dt: tegra: add dts file for paz00
Marc Dietrich
- [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00
Marc Dietrich
- [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00
Marc Dietrich
- [PATCH v3 0/3] paz00 updates for 3.3
Marc Dietrich
- [PATCH 1/3] ARM: tegra: paz00: add support for wakeup gpio key
Marc Dietrich
- [PATCH 2/3] staging: nvec: add device tree support
Marc Dietrich
- [PATCH 3/3] arm/dt: tegra: add dts file for paz00
Marc Dietrich
- [PATCH 1/3] ARM: tegra: paz00: add support for wakeup gpio key
Marc Dietrich
- [PATCH 2/3] staging: nvec: add device tree support
Marc Dietrich
- [PATCH 3/3] arm/dt: tegra: add dts file for paz00
Marc Dietrich
- [PATCH 32/55] i2c: irq: Remove IRQF_DISABLED
Ben Dooks
- [GIT PULL] I2C: OMAP: misc. cleanup for v3.2
Ben Dooks
- [RFC 2/2] dma-buf: Documentation for buffer sharing framework
Randy Dunlap
- [PATCH v6 09/10] ARM: S5PC100: Modify platform data for pl330 driver
Anca Emanuel
- [PATCH] ARM: mm/alignment.c: Fix build error
Fabio Estevam
- [ resend PATCH 1/1] ARM: i.MX28: shift frac value in _CLK_SET_RATE
Fabio Estevam
- [PATCH] imx: add polled io uart methods
Fabio Estevam
- Warning at kernel/mutex.c
Fabio Estevam
- Warning at kernel/mutex.c
Fabio Estevam
- Warning at kernel/mutex.c
Fabio Estevam
- [PATCH] ARM: mx3: Remove duplicate entries in iomux-mx3.h
Fabio Estevam
- [PATCH] ARM: mx31pdk: Add MC13783 RTC support
Fabio Estevam
- [PATCH] ARM: mx31pdk: Add MC13783 RTC support
Fabio Estevam
- [GIT PULL] at91 fixes for 3.1
Nicolas Ferre
- [PATCH 3/3] tty/serial: atmel_serial: __devinit_p for probe function
Nicolas Ferre
- [PATCH 1/3] tty/serial: atmel_serial: change platform_data variable name
Nicolas Ferre
- [PATCH 2/3] tty/serial: atmel_serial: whitespace and braces modifications
Nicolas Ferre
- [PATCH 3/3] tty/serial: atmel_serial: __devinit_p for probe function
Nicolas Ferre
- [PATCH 3/3] tty/serial: atmel_serial: __devinit_p for probe function
Nicolas Ferre
- [RFC PATCH] tty/serial: atmel_serial: add device tree support
Nicolas Ferre
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Nicolas Ferre
- [PATCH 3/3] tty/serial: atmel_serial: __devinit_p for probe function
Nicolas Ferre
- [RFC PATCH] tty/serial: atmel_serial: add device tree support
Nicolas Ferre
- [PATCH RESEND] mmc: sdio: rw extended, use a sg entry for each block
Nicolas Ferre
- [PATCH 1/3] sam9g20ek/9m10g45ek/stam9g20: unbreak build after 'use -EINVAL for invalid gpio'
Nicolas Ferre
- [PATCHv2] hw_random: add driver for atmel true hardware random number generator
Nicolas Ferre
- [PATCH 1/2] sam9g45: add trng clock and platform device
Nicolas Ferre
- [PATCH] sam9g20ek/9m10g45ek/stam9g20: unbreak build after 'use -EINVAL for invalid gpio'
Nicolas Ferre
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Nicolas Ferre
- [GIT PULL] at91: driver for Atmel true hardware random number generator
Nicolas Ferre
- [PATCH 1/4] dmaengine: at_hdmac: platform data move to use .id_table
Nicolas Ferre
- [PATCH 2/4] dmaengine: at_hdmac: add device tree support
Nicolas Ferre
- [PATCH 3/4] ARM: at91/dma: remove platform data from DMA controller
Nicolas Ferre
- [PATCH 4/4] ARM: at91/dma: DMA controller registering with DT support
Nicolas Ferre
- [PATCH V2 4/4] ARM: at91/dma: DMA controller registering with DT support
Nicolas Ferre
- [RFC PATCH] tty/serial: atmel_serial: add device tree support
Nicolas Ferre
- [RFC PATCH] tty/serial: RS485 bindings for device tree
Nicolas Ferre
- [RFC PATCH] tty/serial: RS485 bindings for device tree
Nicolas Ferre
- [RFC PATCH] tty/serial: RS485 bindings for device tree
Nicolas Ferre
- [RFC PATCH] tty/serial: atmel_serial: add device tree support
Nicolas Ferre
- [PATCH v2 0/5] tty/serial: atmel_serial: Device Tree support
Nicolas Ferre
- [PATCH v2 1/5] tty/serial: RS485 bindings for device tree
Nicolas Ferre
- [PATCH v2 2/5] tty/serial: atmel_serial: change platform_data variable name
Nicolas Ferre
- [PATCH v2 3/5] tty/serial: atmel_serial: whitespace and braces modifications
Nicolas Ferre
- [PATCH v2 4/5] tty/serial: atmel_serial: auto-enumerate ports
Nicolas Ferre
- [PATCH v2 5/5] tty/serial: atmel_serial: add device tree support
Nicolas Ferre
- [PATCH 1/4] dmaengine: at_hdmac: platform data move to use .id_table
Nicolas Ferre
- [PATCH 1/4] dmaengine: at_hdmac: platform data move to use .id_table
Nicolas Ferre
- [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA
Nicolas Ferre
- [PATCH v3 1/4] dmaengine: at_hdmac: platform data move to use .id_table
Nicolas Ferre
- [PATCH v3 2/4] dmaengine: at_hdmac: add device tree support
Nicolas Ferre
- [PATCH v3 3/4] ARM: at91/dma: remove platform data from DMA controller
Nicolas Ferre
- [PATCH v3 4/4] ARM: at91/dma: DMA controller registering with DT support
Nicolas Ferre
- [PATCH v3 2/4] dmaengine: at_hdmac: add device tree support
Nicolas Ferre
- [PATCH 11/21] ARM: drop unused Kconfig symbols
Nicolas Ferre
- [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA
Nicolas Ferre
- [PATCH v4 1/2] dmaengine: at_hdmac: platform data move to use .id_table
Nicolas Ferre
- [PATCH v4 2/2] dmaengine: at_hdmac: add device tree support
Nicolas Ferre
- [AT91 PULL for 3.2] boards merge + gpio rework
Nicolas Ferre
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Nicolas Ferre
- [GIT PULL] at91: driver for Atmel true hardware random number generator
Nicolas Ferre
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Nicolas Ferre
- [PATCH] tty/serial: atmel_serial: bootconsole removed from auto-enumerates
Nicolas Ferre
- [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA
Nicolas Ferre
- [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA
Nicolas Ferre
- [PATCH] dt: Add empty of_match_node() macro
Nicolas Ferre
- [PATCH V3 1/2] ARM: at91: dt: at91sam9g45 family and board device tree files
Nicolas Ferre
- [PATCH V3 2/2] ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support
Nicolas Ferre
- [PATCH V3 (bugfix to fold)] ARM: at91: usb_a9g20.dts: fix memory location
Nicolas Ferre
- [PATCH V3 1/2] ARM: at91: dt: at91sam9g45 family and board device tree files
Nicolas Ferre
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Nicolas Ferre
- [PATCH V3 1/2] ARM: at91: dt: at91sam9g45 family and board device tree files
Nicolas Ferre
- [GIT PULL] at91 device tree basics
Nicolas Ferre
- [PATCH] ARM: at91: Fix USBA gadget registration
Nicolas Ferre
- [PATCH] dt: add empty of_alias_get_id() for non-dt builds
Nicolas Ferre
- [RFC][PATCH] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired
Paul Fertser
- [RFC][PATCH] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired
Paul Fertser
- [RFC][PATCH] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired
Paul Fertser
- [PATCH] iomux-mx25: configuration to support CSPI3 on CSI pins
Paul Fertser
- [PATCH 2/5] ARM: s3c64xx: Add generic high resolution time support using PWM timers.
Tomasz Figa
- [PATCH] ARM: at91: Fix USBA gadget registration
Jochen Friedrich
- [PATCH] ARM: at91: Fix USBA gadget registration
Jochen Friedrich
- [PATCH] drivers: create a pin control subsystem v8
Mike Frysinger
- [PATCH] drivers: create a pin control subsystem v8
Mike Frysinger
- [PATCH] drivers: create a pin control subsystem v8
Mike Frysinger
- [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h
Mike Frysinger
- [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers
Mike Frysinger
- [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers
Mike Frysinger
- acs5k_tiny_defconfig broken by mach-ks8695 GPIO move
Mike Frysinger
- [PATCH] gpio: fix a build failure on KS8695 GPIO
Mike Frysinger
- [PATCH v2] asm-generic/gpio.h: merge basic gpiolib wrappers
Mike Frysinger
- [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers
Mike Frysinger
- [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers
Mike Frysinger
- [RFC PATCH v3] drivercore: Add driver probe deferral mechanism
G, Manjunath Kondaiah
- [RFC PATCH v3] drivercore: Add driver probe deferral mechanism
G, Manjunath Kondaiah
- [RFC PATCH v3] drivercore: Add driver probe deferral mechanism
G, Manjunath Kondaiah
- [PATCH 0/5] Driver Probe Deferral Mechanism
G, Manjunath Kondaiah
- [PATCH 4/5] gpiolib: handle deferral probe error
G, Manjunath Kondaiah
- [PATCH 1/5] drivercore: add new error value for deferred probe
G, Manjunath Kondaiah
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
G, Manjunath Kondaiah
- [PATCH V9 2/5] ahci_plt Add the board_ids and pi refer to different features
Jeff Garzik
- [PATCH] ARM: mark empty gpio.h files empty
Jeff Garzik
- [PATCH] ARM: kprobes: work around build errors
Dr. David Alan Gilbert
- [PATCH RESEND] ARM: smp_twd: Reconfigure clockevents after cpufreq change
Thomas Gleixner
- [PATCH RESEND] ARM: smp_twd: Reconfigure clockevents after cpufreq change
Thomas Gleixner
- [patch] ARM: smpboot: Enable interrupts after marking CPU online/active
Thomas Gleixner
- ARM SoC tree: OMAP PM dependency on tip irq/core
Thomas Gleixner
- [PATCH v2] irq: support domains with non-zero hwirq base
Thomas Gleixner
- [PATCH 1/2] [ARM] mach-types: Re-add apf9328
Gwenhael Goavec-Merou
- [PATCH 2/2] [ARM] MX1:apf9328: Add i2c support
Gwenhael Goavec-Merou
- [PATCH 1/9] mm: move some functions from memory_hotplug.c to page_isolation.c
Mel Gorman
- [PATCH 2/9] mm: alloc_contig_freed_pages() added
Mel Gorman
- [PATCH 3/9] mm: alloc_contig_range() added
Mel Gorman
- [PATCH 4/9] mm: MIGRATE_CMA migration type added
Mel Gorman
- [PATCH 6/9] drivers: add Contiguous Memory Allocator
Mel Gorman
- [PATCH 2/9] mm: alloc_contig_freed_pages() added
Mel Gorman
- [PATCH] ARM: SAMSUNG: s3c-dma-ops needs export.h for EXPORT_SYMBOL
Paul Gortmaker
- linux-next failure on tegra due to conflicts between PPI and irq domain patches and irq.h->module.h include removal
Paul Gortmaker
- linux-next failure on tegra due to conflicts between PPI and irq domain patches and irq.h->module.h include removal
Paul Gortmaker
- [PATCH 19/30] tty/serial/omap: console can only be built-in
Govindraj
- [PATCH v6 02/16] OMAP2+: hwmod: Add API to check IO PAD wakeup status
Govindraj
- [PATCH v6 02/16] OMAP2+: hwmod: Add API to check IO PAD wakeup status
Govindraj
- [PATCH v6 04/16] OMAP2+: UART: cleanup 8250 console driver support
Govindraj
- [PATCH v6 04/16] OMAP2+: UART: cleanup 8250 console driver support
Govindraj
- [PATCH v6 07/16] OMAP2+: UART: Add default mux for all uarts.
Govindraj
- [PATCH v6 02/16] OMAP2+: hwmod: Add API to check IO PAD wakeup status
Govindraj
- [PATCH v6 05/16] OMAP2+: UART: Cleanup part of clock gating mechanism for uart
Govindraj
- [PATCH v6 08/16] OMAP2+: UART: Store certain reg values to port structure
Govindraj
- [PATCH v6 06/16] OMAP2+: UART: Remove certain feilds from omap_uart_state struct
Govindraj
- [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver
Govindraj
- [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver
Govindraj
- [PATCH v6 11/16] OMAP2+: UART: Move errata handling from serial.c to omap-serial
Govindraj
- [PATCH v6 12/16] OMAP2+: UART: Allow UART parameters to be configured from board file.
Govindraj
- [PATCH v6 14/16] OMAP2+: UART: Take console_lock in suspend path if not taken
Govindraj
- [PATCH v6 10/16] OMAP2+: UART: Modify omap_uart_can_sleep function
Govindraj
- [PATCH v6 15/16] OMAP2+: UART: Enable back uart clocks with runtime API for early console
Govindraj
- [PATCH v6 10/16] OMAP2+: UART: Modify omap_uart_can_sleep function
Govindraj
- [PATCH v6 14/16] OMAP2+: UART: Take console_lock in suspend path if not taken
Govindraj
- [PATCH v6 15/16] OMAP2+: UART: Enable back uart clocks with runtime API for early console
Govindraj
- [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver
Govindraj
- [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver
Govindraj
- [PATCH v6 15/16] OMAP2+: UART: Enable back uart clocks with runtime API for early console
Govindraj
- [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver
Govindraj
- [PATCH v7 21/21] OMAP2+: UART: Do not gate uart clocks if used for debug_prints
Govindraj
- [PATCH v7 21/21] OMAP2+: UART: Do not gate uart clocks if used for debug_prints
Govindraj
- [PATCH v7 21/21] OMAP2+: UART: Do not gate uart clocks if used for debug_prints
Govindraj
- [PATCH v7 00/21] OMAP2+: UART: Runtime adaptation + cleanup
Govindraj.R
- [PATCH v7 01/21] OMAP2+: UART: cleanup + remove uart pm specific API
Govindraj.R
- [PATCH v7 02/21] OMAP2+: UART: cleanup 8250 console driver support
Govindraj.R
- [PATCH v7 03/21] OMAP2+: UART: Cleanup part of clock gating mechanism for uart
Govindraj.R
- [PATCH v7 04/21] OMAP2+: UART: Add default mux for all uarts.
Govindraj.R
- [PATCH v7 05/21] OMAP2+: UART: Remove mapbase/membase fields from pdata.
Govindraj.R
- [PATCH v7 06/21] OMAP2+: UART: Add runtime pm support for omap-serial driver
Govindraj.R
- [PATCH v7 07/21] OMAP2+: UART: Remove context_save and move context restore to driver
Govindraj.R
- [PATCH v7 08/21] OMAP2+: UART: Ensure all reg values configured are available from port structure
Govindraj.R
- [PATCH v7 09/21] OMAP2+: UART: Remove uart reset function.
Govindraj.R
- [PATCH v7 10/21] OMAP2+: UART: Get context loss count to context restore
Govindraj.R
- [PATCH v7 11/21] OMAP2+: UART: Move errata handling from serial.c to omap-serial
Govindraj.R
- [PATCH v7 12/21] OMAP2+: UART: Add wakeup mechanism for omap-uarts
Govindraj.R
- [PATCH v7 13/21] OMAP2+: UART: Remove old and unused clocks handling funcs
Govindraj.R
- [PATCH v7 14/21] OMAP2+: UART: Allow UART parameters to be configured from board file.
Govindraj.R
- [PATCH v7 15/21] OMAP2+: UART: Make the RX_TIMEOUT for DMA configurable for each UART
Govindraj.R
- [PATCH v7 16/21] OMAP2+: UART: Remove custom activate funcs and use generic funcs.
Govindraj.R
- [PATCH v7 17/21] OMAP2+: UART: Remove omap_uart_can_sleep and add pm_qos
Govindraj.R
- [PATCH v7 18/21] OMAP2+: UART: remove temporary variable used to count uart instance
Govindraj.R
- [PATCH v7 19/21] OMAP2+: UART: Use custom activate func for console uart.
Govindraj.R
- [PATCH v7 20/21] OMAP2+: UART: Avoid uart idling on suspend for no_console_suspend usecase
Govindraj.R
- [PATCH v7 21/21] OMAP2+: UART: Do not gate uart clocks if used for debug_prints
Govindraj.R
- [PATCH v3 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM
Igor Grinberg
- [PATCH v3 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM
Igor Grinberg
- Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011
Igor Grinberg
- [PATCH] ARM: pxa/cm-x300: properly set bt_reset pin
Igor Grinberg
- Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011
Igor Grinberg
- Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011
Igor Grinberg
- [PATCH 0/4] ARM: OMAP3: cm-t35/cm-t3730 fixes
Igor Grinberg
- [PATCH 1/4] ARM: OMAP3: cm-t35: add regulator supply for ads7846
Igor Grinberg
- [PATCH 2/4] ARM: OMAP3: cm-t35: fix DSS regulator supply
Igor Grinberg
- [PATCH 3/4] ARM: OMAP3: cm-t35: fix audio
Igor Grinberg
- [PATCH 4/4] arm: omap3: cm-t35: add reset for sb-t35 usb hub
Igor Grinberg
- [PATCH 4/4 v2] ARM: OMAP3: cm-t35: add reset for sb-t35 usb hub
Igor Grinberg
- [PATCH 3/4] ARM: OMAP3: cm-t35: fix audio
Igor Grinberg
- [PATCH 3/4 v2] ARM: OMAP3: cm-t35: fix audio
Igor Grinberg
- [PATCH] ARM: OMAP3: cm-t35: fix mux mode for DSS pins
Igor Grinberg
- [PATCH] ARM: pxa/cm-x300: properly set bt_reset pin
Igor Grinberg
- [GIT PULL] pxa: fixes for next
Igor Grinberg
- sched: ARM: arch_scale_freq_power
Vincent Guittot
- sched: ARM: arch_scale_freq_power
Vincent Guittot
- sched: ARM: arch_scale_freq_power
Vincent Guittot
- sched: ARM: arch_scale_freq_power
Vincent Guittot
- Warning in -next w/ "ARM: 7011/1: Add ARM cpu topology definition"
Vincent Guittot
- [PATCH] ARM: cpu topology: fix warning
Vincent Guittot
- [PATCH v4 3/7] arm/imx: add gic_handle_irq function
Shawn Guo
- [PATCH v2] ARM: localtimer: add header linux/errno.h explicitly
Shawn Guo
- [PATCH 0/2] Make IPI and localtimer handlers callable from C code
Shawn Guo
- [PATCH 1/2] ARM: smp: Add an IPI handler callable from C code
Shawn Guo
- [PATCH 2/2] ARM: smp: Add a localtimer handler callable from C code
Shawn Guo
- [PATCH v4 0/7] add initial imx6q support
Shawn Guo
- [PATCH v5 0/8] add initial imx6q support
Shawn Guo
- [PATCH v5 1/8] arm/imx6q: add device tree source
Shawn Guo
- [PATCH v5 2/8] arm/imx6q: add core definitions and low-level debug uart
Shawn Guo
- [PATCH v5 3/8] arm/imx: add gic_handle_irq function
Shawn Guo
- [PATCH v5 4/8] arm/imx6q: add core drivers clock, gpc, mmdc and src
Shawn Guo
- [PATCH v5 5/8] arm/imx6q: add smp and cpu hotplug support
Shawn Guo
- [PATCH v5 6/8] arm/imx6q: add device tree machine support
Shawn Guo
- [PATCH v5 7/8] arm/imx6q: add suspend/resume support
Shawn Guo
- [PATCH v5 8/8] arm/imx: merge i.MX3 and i.MX6
Shawn Guo
- [PATCH] mx5: modify pm and idle
Shawn Guo
- [PATCH 0/2] Make IPI and localtimer handlers callable from C code
Shawn Guo
- [PATCH v2 5/7] ARM: highbank: add SMP support
Shawn Guo
- [PATCH] MAINTAINERS: add ARM/FREESCALE IMX6 entry
Shawn Guo
- [PATCH] mx5: modify pm and idle
Shawn Guo
- [PATCH 1/3] ARM: imx: always select CACHE_L2X0 on i.MX3
Shawn Guo
- [PATCH 3/7] ARM: imx: export imx_ioremap
Shawn Guo
- [PATCH 1/2] drivers: create a pin control subsystem v9
Shawn Guo
- [PATCH 1/2] drivers: create a pin control subsystem v9
Shawn Guo
- [GIT PULL] DEBUG_LL platform updates for 3.2
Shawn Guo
- [RFC][PATCH] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired
Shawn Guo
- [PATCH] ARM imx51: Add Armadeus systems APF51 support
Shawn Guo
- [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage
Shawn Guo
- [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage
Shawn Guo
- [GIT PULL] GIC DT binding support
Shawn Guo
- [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage
Shawn Guo
- pinctrl_config APIs, and other pinmux questions
Shawn Guo
- pinctrl_config APIs, and other pinmux questions
Shawn Guo
- [PATCH 1/1] ARM: i.MX28: shift frac value in _CLK_SET_RATE
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v6 0/2] Add device tree support for i.mx51/53 boards
Shawn Guo
- [PATCH v6 1/2] arm/mx5: add device tree support for imx53 boards
Shawn Guo
- [PATCH v6 2/2] arm/mx5: add device tree support for imx51 babbage
Shawn Guo
- [PATCH 0/5] Fix indirect inclusion to <mach/hardware.h>
Shawn Guo
- [PATCH 1/5] arm/imx: remove mx31_setup_weimcs() from mx31.h
Shawn Guo
- [PATCH 2/5] arm/imx: explicitly includes mach/hardware.h in mach-kzm_arm11_01.c
Shawn Guo
- [PATCH 3/5] arm/imx: remove mx27_setup_weimcs() from mx27.h
Shawn Guo
- [PATCH 4/5] arm/imx: explicitly includes mach/hardware.h in pm-imx27.c
Shawn Guo
- [PATCH 5/5] mmc: mxcmmc: explicitly includes mach/hardware.h
Shawn Guo
- [PATCH v6 0/2] Add device tree support for i.mx51/53 boards
Shawn Guo
- [PATCH v6 0/2] Add device tree support for i.mx51/53 boards
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 5/5] regulator: map consumer regulator based on device tree
Shawn Guo
- [patch 1/1] iMX: Fix module build
Shawn Guo
- pinctrl_config APIs, and other pinmux questions
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v4 0/4] genirq: handling GIC per-cpu interrupts
Shawn Guo
- [GIT PULL] GIC DT binding support
Shawn Guo
- [GIT PULL] i.MX6Q support
Shawn Guo
- [PATCH] arm/imx: add missing include of asm/exception.h for avic.c
Shawn Guo
- [PATCH] MAINTAINERS: add ARM/FREESCALE MXS entry
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [GIT PULL] i.MX6Q support
Shawn Guo
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Shawn Guo
- [PATCH v2 2/7] clk: Implement clk_set_rate
Shawn Guo
- [PATCH v2 3/7] clk: Add fixed-rate clock
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v6 0/2] Add device tree support for i.mx51/53 boards
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Shawn Guo
- unwind and lockdep
Harald Gustafsson
- [PATCH] fix ehci alignment error
Harro Haan
- [PATCH 0/1] A trio of IXP425 boards
Krzysztof Halasa
- [PATCH 2/9] mm: alloc_contig_freed_pages() added
Dave Hansen
- [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets
Ulf Hansson
- [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets
Ulf Hansson
- [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets
Ulf Hansson
- [PATCH] mmc: mmci: Do not release spinlock in request_end
Ulf Hansson
- [PATCH] mmc: mmci: Do not release spinlock in request_end
Ulf Hansson
- [PATCH] mmc: mmci: Do not release spinlock in request_end
Ulf Hansson
- [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets
Ulf Hansson
- [PATCH] mmc: mmci: Do not release spinlock in request_end
Ulf Hansson
- [PATCH] spi/pl022: Enable clock in probe an use runtime_idle
Ulf Hansson
- [PATCH] mmc: mmci: Improve runtime PM support
Ulf Hansson
- [PATCH] spi/pl022: Enable clock in probe an use runtime_idle
Ulf Hansson
- [PATCH] mmc: mmci: Improve runtime PM support
Ulf Hansson
- [PATCH] mmc: mmci: Improve runtime PM support
Ulf Hansson
- [PATCH] mmc: mmci: Improve runtime PM support
Ulf Hansson
- [PATCH] mmc: mmci: Improve runtime PM support
Ulf Hansson
- [PATCH] mmc: mmci: Improve runtime PM support
Ulf Hansson
- [PATCH V2 0/3] Clearify code paths for how to modify the power register
Ulf Hansson
- [PATCH V2 1/3] mmc: mmci: Put power register deviations in variant data
Ulf Hansson
- [PATCH V2 2/3] mmc: mmci: Provide option to configure bus signal direction
Ulf Hansson
- [PATCH V2 3/3] mmc: mmci: Change vdd_handler to a generic ios_handler
Ulf Hansson
- [PATCH 0/2] mmc: mmci: Bugfixes for SDIO
Ulf Hansson
- [PATCH 1/2] mmc: mmci: Prepare for SDIO before setting up DMA job
Ulf Hansson
- [PATCH 2/2] mmc: mmci: Fix incorrect handling of HW flow control for SDIO
Ulf Hansson
- [PATCH 0/2] mmc: mmci: Improvements for SDIO
Ulf Hansson
- [PATCH 1/2] mmc: mmci: Support non-power-of-two block sizes for ux500v2 variant
Ulf Hansson
- [PATCH 2/2] mmc: mmci: add constraints on alignment for SDIO
Ulf Hansson
- [PATCH] mmc: mmci: Improve runtime PM support
Ulf Hansson
- [PATCH] mmc: mmci: Improve runtime PM support
Ulf Hansson
- [PATCH] mmc: mmci: Improve runtime PM support
Ulf Hansson
- [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend
Ulf Hansson
- [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend
Ulf Hansson
- [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend
Ulf Hansson
- [PATCH V2] AMBA: Use suspend_noriq to force devices into runtime suspend
Ulf Hansson
- [PATCH] ARM: remove bashism in check for multiple zreladdrs
Sascha Hauer
- [PATCH] mx5: modify pm and idle
Sascha Hauer
- [PULL] i.MX
Sascha Hauer
- [PATCH V9 2/5] ahci_plt Add the board_ids and pi refer to different features
Sascha Hauer
- [PULL] i.MX
Sascha Hauer
- [PULL] i.MX
Sascha Hauer
- [PATCH 6/9] ARM: SPMP8000: Add pwm driver
Sascha Hauer
- [RFC][PATCH] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired
Sascha Hauer
- [RFC][PATCH] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired
Sascha Hauer
- [GIT PULL] i.MX features
Sascha Hauer
- [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage
Sascha Hauer
- [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage
Sascha Hauer
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Sascha Hauer
- [PATCH v2 4/7] clk: Add simple gated clock
Sascha Hauer
- [RFC] clocktree representation in the devicetree
Sascha Hauer
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Sascha Hauer
- [RFC] clocktree representation in the devicetree
Sascha Hauer
- [RFC] clocktree representation in the devicetree
Sascha Hauer
- [PATCH] imx: add polled io uart methods
Sascha Hauer
- [RFC] clocktree representation in the devicetree
Sascha Hauer
- [PATCH v6 0/2] Add device tree support for i.mx51/53 boards
Sascha Hauer
- Warning at kernel/mutex.c
Sascha Hauer
- [ resend PATCH 1/1] ARM: i.MX28: shift frac value in _CLK_SET_RATE
Sascha Hauer
- [GIT PULL] i.MX cleanup patches
Sascha Hauer
- [RFC] clocktree representation in the devicetree
Sascha Hauer
- [GIT PULL] i.MX features
Sascha Hauer
- [PATCH] ARM i.MX avic: add missing include
Sascha Hauer
- [GIT PULL] i.MX6Q support
Sascha Hauer
- [PATCH] arm/imx: add missing include of asm/exception.h for avic.c
Sascha Hauer
- [PATCH 12/12] ARM: imx: move special idle code to proper out-of-line pm_idle hooks
Sascha Hauer
- [GIT PULL] i.MX5 devicetree support
Sascha Hauer
- [GIT PULL] assorted i.MX fixes
Sascha Hauer
- [PATCH 2/2] [ARM] MX1:apf9328: Add i2c support
Sascha Hauer
- [PATCH v2] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit
Sascha Hauer
- [PATCH] ARM: mx5: Use CLKDEV_INIT for creating clk_lookup instance
Sascha Hauer
- [RFC 1/4] Documentation: devres: add allocation functions to list of supported calls
Tejun Heo
- [RFC 3/4] lib: devres: add convenience function to remap a resource
Tejun Heo
- [RFC 3/4] lib: devres: add convenience function to remap a resource
Tejun Heo
- [RFC 3/4] lib: devres: add convenience function to remap a resource
Tejun Heo
- [PATCH] lib: devres: add convenience function to remap a resource
Tejun Heo
- ARM SoC tree: OMAP PM dependency on tip irq/core
Rob Herring
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Rob Herring
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Rob Herring
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Rob Herring
- [RFC PATCH] tty/serial: atmel_serial: add device tree support
Rob Herring
- [RFC PATCH] tty/serial: atmel_serial: add device tree support
Rob Herring
- [PATCH 0/3] GIC OF bindings
Rob Herring
- Please help with the OMAP static mapping mess
Rob Herring
- [PATCH v2] irq: support domains with non-zero hwirq base
Rob Herring
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Rob Herring
- [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities
Rob Herring
- [PATCH v2 5/7] ARM: highbank: add SMP support
Rob Herring
- [PULL] Devicetree for 3.2
Rob Herring
- [PATCH v2] irq: support domains with non-zero hwirq base
Rob Herring
- [PATCH] gpio: exynos4: Add device tree support
Rob Herring
- [PATCH] gpio: exynos4: Add device tree support
Rob Herring
- [PATCH] gpio: exynos4: Add device tree support
Rob Herring
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Rob Herring
- [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions
Rob Herring
- [GIT PULL] GIC DT binding support
Rob Herring
- [GIT PULL] Calxeda Highbank platform support
Rob Herring
- [PATCH 1/2] ARM: Samsung: Add Exynos4 device tree enabled board file
Rob Herring
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Rob Herring
- [RFC] clocktree representation in the devicetree
Rob Herring
- [RFC] clocktree representation in the devicetree
Rob Herring
- [GIT PULL] GIC DT binding support
Rob Herring
- [GIT PULL] GIC DT binding support
Rob Herring
- [RFC] clocktree representation in the devicetree
Rob Herring
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Rob Herring
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Rob Herring
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Rob Herring
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Rob Herring
- [GIT PULL] GIC DT binding support
Rob Herring
- [GIT PULL] GIC DT binding support
Rob Herring
- [GIT PULL] GIC DT binding support
Rob Herring
- [GIT PULL] DEBUG_LL platform updates for 3.2
Rob Herring
- [GIT PULL] DEBUG_LL platform updates for 3.2
Rob Herring
- [GIT PULL] GIC DT binding support
Rob Herring
- [GIT PULL] DEBUG_LL platform updates for 3.2
Rob Herring
- [PATCH] ARM: gic: fix irq_alloc_descs handling for sparse irq
Rob Herring
- [PATCH] ARM: gic: fix irq_alloc_descs handling for sparse irq
Rob Herring
- [PATCH v2 4/5] ARM: SPMP8000: Add SPMP8000 SoC and Letcool board dts descriptions
Rob Herring
- [PATCH v2] ARM: gic: fix irq_alloc_descs handling for sparse irq
Rob Herring
- [PATCH V3 1/2] ARM: at91: dt: at91sam9g45 family and board device tree files
Rob Herring
- [PATCH V3 2/2] ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support
Rob Herring
- [PATCH v2] gpio: pl061: add DT binding support
Rob Herring
- [GIT PULL] GIC DT binding support
Rob Herring
- [PATCH] gpio: pl061: add DT binding support
Rob Herring
- [PATCH 3/3] arm/dt: tegra: add dts file for paz00
Rob Herring
- linux-next failure on tegra due to conflicts between PPI and irq domain patches and irq.h->module.h include removal
Rob Herring
- [PATCH] dt: add empty of_alias_get_id() for non-dt builds
Rob Herring
- [GIT PULL] GIC DT binding support
Rob Herring
- [GIT PULL] GIC DT binding support
Rob Herring
- [RFC PATCH v3] drivercore: Add driver probe deferral mechanism
Kevin Hilman
- [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support
Kevin Hilman
- [RFC 2/5] ARM: OMAP: omap_device: add a method to set iommu private archdata
Kevin Hilman
- [RFC 2/5] ARM: OMAP: omap_device: add a method to set iommu private archdata
Kevin Hilman
- [PATCH 1/4] ARM: OMAP3 PM: Fix IO Daisychain sequence
Kevin Hilman
- [PATCH v6 01/16] OMAP2+: hwmod: Add API to enable IO ring wakeup.
Kevin Hilman
- [PATCH v6 04/16] OMAP2+: UART: cleanup 8250 console driver support
Kevin Hilman
- [GIT PULL] I2C: OMAP: misc. cleanup for v3.2
Kevin Hilman
- [PATCH v6 04/16] OMAP2+: UART: cleanup 8250 console driver support
Kevin Hilman
- [PATCH v6 07/16] OMAP2+: UART: Add default mux for all uarts.
Kevin Hilman
- [PATCH v3] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection
Kevin Hilman
- [PATCH] ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only
Kevin Hilman
- ARM SoC tree: OMAP PM dependency on tip irq/core
Kevin Hilman
- [PATCH v3] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection
Kevin Hilman
- [GIT PULL] OMAP: few more PM cleanup/fixes for v3.2
Kevin Hilman
- [PATCH] ARM: PM: build sleep/suspend code for idle path also (not only suspend)
Kevin Hilman
- [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support
Kevin Hilman
- [PATCH] ARM: PM: build sleep/suspend code for idle path also (not only suspend)
Kevin Hilman
- [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support
Kevin Hilman
- [PATCH] ARM: OMAP: omap_device: Add omap_device_{alloc, delete, register}_ss
Kevin Hilman
- [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support
Kevin Hilman
- [PATCH] ARM: omap2+: stub out omap*_volt_data
Kevin Hilman
- [PATCH v6 02/16] OMAP2+: hwmod: Add API to check IO PAD wakeup status
Kevin Hilman
- [PATCH v6 05/16] OMAP2+: UART: Cleanup part of clock gating mechanism for uart
Kevin Hilman
- [PATCH v6 06/16] OMAP2+: UART: Remove certain feilds from omap_uart_state struct
Kevin Hilman
- [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver
Kevin Hilman
- [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver
Kevin Hilman
- [PATCH v6 08/16] OMAP2+: UART: Store certain reg values to port structure
Kevin Hilman
- [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support
Kevin Hilman
- [PATCH v5 2/3] omap_twl: Prevent SR to enable for am3517/am3505 devices
Kevin Hilman
- [PATCH v6 10/16] OMAP2+: UART: Modify omap_uart_can_sleep function
Kevin Hilman
- [PATCH v6 12/16] OMAP2+: UART: Allow UART parameters to be configured from board file.
Kevin Hilman
- [PATCH v6 14/16] OMAP2+: UART: Take console_lock in suspend path if not taken
Kevin Hilman
- [PATCH v6 11/16] OMAP2+: UART: Move errata handling from serial.c to omap-serial
Kevin Hilman
- [PATCH v6 15/16] OMAP2+: UART: Enable back uart clocks with runtime API for early console
Kevin Hilman
- [PATCH v6 10/16] OMAP2+: UART: Modify omap_uart_can_sleep function
Kevin Hilman
- [PATCH v6 14/16] OMAP2+: UART: Take console_lock in suspend path if not taken
Kevin Hilman
- [PATCH v6 15/16] OMAP2+: UART: Enable back uart clocks with runtime API for early console
Kevin Hilman
- [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver
Kevin Hilman
- [PATCH v6 15/16] OMAP2+: UART: Enable back uart clocks with runtime API for early console
Kevin Hilman
- [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver
Kevin Hilman
- [PATCH v6 09/16] OMAP2+: UART: Add runtime pm support for omap-serial driver
Kevin Hilman
- [PATCH v6 15/16] OMAP2+: UART: Enable back uart clocks with runtime API for early console
Kevin Hilman
- [GIT PULL] OMAP4 MPU sub-system PM for v3.2
Kevin Hilman
- [PATCH] CPUIdle: Reevaluate C-states under CPU load to favor deeper C-states
Kevin Hilman
- [PATCH] ARM: remove NR_IRQS dependency for ARM-specific HARDIRQ_BITS definition
Kevin Hilman
- [PATCH] ARM: remove NR_IRQS dependency for ARM-specific HARDIRQ_BITS definition
Kevin Hilman
- [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit
Lauri Hintsala
- [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit
Lauri Hintsala
- [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit
Lauri Hintsala
- [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit
Lauri Hintsala
- [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit
Lauri Hintsala
- [PATCH] ARM: mach-mxs: fix machines' initializers order
Lauri Hintsala
- [PATCH v2] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit
Lauri Hintsala
- [PATCH v2] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit
Lauri Hintsala
- [PATCH v2] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit
Lauri Hintsala
- Getting random Kernel Crash with v3.1-rc8 kernel
Hiremath, Vaibhav
- Getting random Kernel Crash with v3.1-rc8 kernel
Hiremath, Vaibhav
- [PATCH Resend] arm: at91: fix NAND bus width decoding from system_rev
Christian Hitz
- Suuri Laina tarjous
Oxford Financial Home
- Possible regression in kexec on ARM ARMv6 and ARMv7 cores
Simon Horman
- Possible regression in kexec on ARM ARMv6 and ARMv7 cores
Simon Horman
- Possible regression in kexec on ARM ARMv6 and ARMv7 cores
Simon Horman
- Possible regression in kexec on ARM ARMv6 and ARMv7 cores
Simon Horman
- Possible regression in kexec on ARM ARMv6 and ARMv7 cores
Simon Horman
- [PATCH] mmc: mmci: Do not release spinlock in request_end
Adrian Hunter
- [PATCH] mmc: mmci: Improve runtime PM support
Adrian Hunter
- [PATCH v2 5/6] OMAP3+: Update DPLL Fint range for OMAP36xx and OMAP4xxx devices
Jon Hunter
- [PATCH v2 6/6] OMAP4: Clock: Correct the name of SLIMBUS interface clocks
Jon Hunter
- [PATCH v2 6/6] OMAP4: Clock: Correct the name of SLIMBUS interface clocks
Jon Hunter
- [PATCH] arch: arm: tegra: Enable headphone detection gpio
Taylor Hutt
- [PATCH] Add missing include of linux/ftrace.h
Jamie Iles
- [PATCH] Add missing include of linux/ftrace.h
Jamie Iles
- [PATCH] picoxcell: add a definition of VMALLOC_END
Jamie Iles
- [PATCH] picoxcell: add a definition of VMALLOC_END
Jamie Iles
- [PATCH 2/2] hw_random: add driver for atmel true hardware random number generator
Jamie Iles
- [PATCHv2] hw_random: add driver for atmel true hardware random number generator
Jamie Iles
- [PATCH 06/26] ARM: pxa: add missing header inclusions
Jamie Iles
- [PATCH 2/3] ARM: imx: add missing include of linux/ftrace.h
Jamie Iles
- [PATCH 2/9] ARM: SPMP8000: Add machine base files
Jamie Iles
- [PATCH 9/9] ARM: SPMP8000: Add Kconfig and Makefile entries to build the machine
Jamie Iles
- [PATCH 7/9] ARM: SPMP8000: Add dts file of SPMP8000 SoC and Letcool board
Jamie Iles
- Add support for the SPMP8000 SoC and Letcool board
Jamie Iles
- [PATCH 2/9] ARM: SPMP8000: Add machine base files
Jamie Iles
- Add support for the SPMP8000 SoC and Letcool board
Jamie Iles
- [GIT PULL] DEBUG_LL platform updates for 3.2
Jamie Iles
- [PATCH 6/6] mach-ux500: remove intermediary add_platform_device* functions
Jamie Iles
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Jamie Iles
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Jamie Iles
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Jamie Iles
- [PATCH 6/6] mach-ux500: remove intermediary add_platform_device* functions
Jamie Iles
- [PATCH v2 1/5] ARM: SPMP8000: Add machine base files
Jamie Iles
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Jamie Iles
- orion/kirkwood and device tree support
Jason
- [PATCH] ARM: tegra: fix compilation error due to mach/hardware.h removal
Olof Johansson
- [PATCH 0/14] Sparse fixes for tegra
Olof Johansson
- [PATCH 01/14] ARM: tegra: add __force to IO_ADDRESS
Olof Johansson
- [PATCH 02/14] ARM: tegra: fuse: use IO_ADDRESS
Olof Johansson
- [PATCH 03/14] ARM: tegra: pinmux: use IO_ADDRESS
Olof Johansson
- [PATCH 04/14] ARM: tegra: timer: don't cast __iomem pointers
Olof Johansson
- [PATCH 05/14] ARM: tegra: tegra2_clocks: don't cast __iomem pointers
Olof Johansson
- [PATCH 06/14] ARM: tegra: tegra2_clocks: 0 -> NULL changes
Olof Johansson
- [PATCH 07/14] ARM: tegra: pcie: don't cast __iomem pointers
Olof Johansson
- [PATCH 08/14] ARM: tegra: pcie: include board.h
Olof Johansson
- [PATCH 09/14] ARM: tegra: pcie: 0 -> NULL changes
Olof Johansson
- [PATCH 10/14] ARM: tegra: tegra_init_cache should be static
Olof Johansson
- [PATCH 11/14] ARM: tegra: tegra_rtc_read_ms should be static
Olof Johansson
- [PATCH 12/14] ARM: tegra: tegra_powergate_is_powered should be static
Olof Johansson
- [PATCH 13/14] ARM: tegra: tegra2_clocks: don't export some tables
Olof Johansson
- [PATCH 14/14] ARM: tegra: dma: staticify some tables and functions
Olof Johansson
- [PATCH v2] ARM: tegra: fix compilation error due to mach/hardware.h removal
Olof Johansson
- [PATCH] MAINTAINERS: Update tegra maintainer information
Olof Johansson
- [PATCH v2 00/14] Sparse fixes for tegra
Olof Johansson
- [PATCH v2 01/14] ARM: tegra: annotate IO_*_VIRT pointers
Olof Johansson
- [PATCH v2 02/14] ARM: tegra: timer: don't cast __iomem pointers
Olof Johansson
- [PATCH v2 03/14] ARM: tegra: tegra2_clocks: don't cast __iomem pointers
Olof Johansson
- [PATCH v2 04/14] ARM: tegra: tegra2_clocks: 0 -> NULL changes
Olof Johansson
- [PATCH v2 05/14] ARM: tegra: pcie: don't cast __iomem pointers
Olof Johansson
- [PATCH v2 06/14] ARM: tegra: pcie: include board.h
Olof Johansson
- [PATCH v2 07/14] ARM: tegra: pcie: 0 -> NULL changes
Olof Johansson
- [PATCH v2 08/14] ARM: tegra: tegra_init_cache should be static
Olof Johansson
- [PATCH v2 09/14] ARM: tegra: tegra_rtc_read_ms should be static
Olof Johansson
- [PATCH v2 10/14] ARM: tegra: tegra_powergate_is_powered should be static
Olof Johansson
- [PATCH v2 11/14] ARM: tegra: tegra2_clocks: don't export some tables
Olof Johansson
- [PATCH v2 12/14] ARM: tegra: dma: staticify some tables and functions
Olof Johansson
- [PATCH v2 13/14] ARM: tegra: cpu-tegra: sparse type fix
Olof Johansson
- [PATCH v2 14/14] ARM: tegra: cpu-tegra: unexport two functions
Olof Johansson
- [PATCH 0/14] Sparse fixes for tegra
Olof Johansson
- Please update linux-next url for tegra
Olof Johansson
- [PATCH v2 10/14] ARM: tegra: tegra_powergate_is_powered should be static
Olof Johansson
- [PATCH] arm/tegra: Harmony: Configure PMC for low-level interrupts
Olof Johansson
- [PATCH v2 3/4] gpio/tegra: Convert to a platform device
Olof Johansson
- [PATCH v2 3/4] gpio/tegra: Convert to a platform device
Olof Johansson
- [PATCH] arm/tegra: pinmux: ioremap registers
Olof Johansson
- [PATCH v9 0/3] Add support for tegra2 based ventana board
Olof Johansson
- [PATCH v4 1/4] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
Olof Johansson
- [PATCH v4 2/4] arm/dt: Tegra: Add pinmux node to tegra20.dtsi
Olof Johansson
- [PATCH v4 4/4] arm/tegra: Convert pinmux driver to a platform device
Olof Johansson
- [PATCH v4 3/4] gpio/tegra: Convert to a platform device
Olof Johansson
- [PATCH v2] arm/tegra: pinmux: ioremap registers
Olof Johansson
- [PATCH] arm/tegra: Harmony: Configure PMC for low-level interrupts
Olof Johansson
- [PATCH v4 3/4] gpio/tegra: Convert to a platform device
Olof Johansson
- [GIT PULL] Please pull tegra cleanups for 3.2
Olof Johansson
- [PATCH] [RESEND] ARM: tegra: devices.c should include devices.h
Olof Johansson
- [PATCH] ARM: tegra: update defconfig
Olof Johansson
- [PATCH] ARM: tegra: update defconfig
Olof Johansson
- [PATCH] ARM: tegra: update defconfig
Olof Johansson
- [PATCH v2 01/14] ARM: tegra: annotate IO_*_VIRT pointers
Olof Johansson
- [GIT PULL] Please pull tegra cleanups for 3.2
Olof Johansson
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Olof Johansson
- [PATCH v4 3/4] gpio/tegra: Convert to a platform device
Olof Johansson
- [GIT PULL] Please pull tegra feature branch for 3.2
Olof Johansson
- [PATCH] ARM: mutually exclude ZBOOT_ROM and AUTO_ZRELADDR
Olof Johansson
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Olof Johansson
- [GIT PULL] Please pull tegra feature branch for 3.2
Olof Johansson
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Olof Johansson
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Olof Johansson
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Olof Johansson
- [PATCH] [3.3] ARM: tegra: emc: max rate based on emc table
Olof Johansson
- [PATCH] [3.3] ARM: tegra: use APB DMA for accessing APB devices
Olof Johansson
- [PATCH] [3.3] [RESEND] ARM: tegra: fuse: use apbio dma for register access
Olof Johansson
- [PATCH] [3.3] ARM: tegra: emc: max rate based on emc table
Olof Johansson
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Olof Johansson
- [PATCH] [3.3] ARM: tegra: use APB DMA for accessing APB devices
Olof Johansson
- [PATCH] [3.3] ARM: tegra: use APB DMA for accessing APB devices
Olof Johansson
- [PATCH] [3.3] ARM: tegra: use APB DMA for accessing APB devices
Olof Johansson
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Olof Johansson
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Olof Johansson
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Olof Johansson
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Olof Johansson
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Olof Johansson
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Olof Johansson
- [PATCH] arm/tegra: Add device-tree support for TrimSlice board
Olof Johansson
- [PATCH] arm/tegra: Don't create duplicate gpio and pinmux devices
Olof Johansson
- [PATCH v3 2/3] arm/tegra: Don't create duplicate gpio and pinmux devices
Olof Johansson
- linux-next failure on tegra due to conflicts between PPI and irq domain patches and irq.h->module.h include removal
Olof Johansson
- linux-next failure on tegra due to conflicts between PPI and irq domain patches and irq.h->module.h include removal
Olof Johansson
- linux-next failure on tegra due to conflicts between PPI and irq domain patches and irq.h->module.h include removal
Olof Johansson
- Tegra T20 / T25 datasheet (Technical Reference Manual)
Olof Johansson
- [PATCH 2/6] arm/tegra: prepare pinmux code for multiple tegra variants
Olof Johansson
- [PATCH 0/6] ux500: Export SoC information and some platform clean-up
Lee Jones
- [PATCH 1/6] mach-ux500: pass parent pointer to each platform device
Lee Jones
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Lee Jones
- [PATCH 3/6] Documentation: add information for new sysfs soc bus functionality
Lee Jones
- [PATCH 4/6] mach-ux500: export System-on-Chip information ux500 via sysfs
Lee Jones
- [PATCH 5/6] mach-ux500: move top level platform devices in sysfs to /sys/devices/socX
Lee Jones
- [PATCH 6/6] mach-ux500: remove intermediary add_platform_device* functions
Lee Jones
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Lee Jones
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Lee Jones
- [PATCH 6/6] mach-ux500: remove intermediary add_platform_device* functions
Lee Jones
- [PATCH v2 0/2] arm: omap4: hsmmc: pbias fixes
Balaji T K
- [PATCH v2 1/2] arm: omap4: hsmmc: Fix Pbias configuration on regulator OFF
Balaji T K
- [PATCH v2 2/2] arm: omap4: hsmmc: configure SDMMC1_DR0 properly
Balaji T K
- [PATCH v3.1-rc9] ARM: populate processor tag in proc-cpuinfo for Uni-processor.
Srinivas KANDAGATLA
- [PATCH 1/5] drivercore: add new error value for deferred probe
Greg KH
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Greg KH
- [PATCH 0/5] Driver Probe Deferral Mechanism
Greg KH
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Greg KH
- [PATCH 1/5] drivercore: add new error value for deferred probe
Greg KH
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Greg KH
- [PATCH 1/5] drivercore: add new error value for deferred probe
Greg KH
- [PATCH] fix ehci alignment error
Greg KH
- [PATCH] fix ehci alignment error
Greg KH
- [PATCH] fix ehci alignment error
Greg KH
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Greg KH
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Greg KH
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Greg KH
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Greg KH
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Greg KH
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Greg KH
- [PATCH 2/6] drivers/base: add bus for System-on-Chip devices
Greg KH
- [PATCH v2] UART: add CSR SiRFprimaII SoC on-chip uart drivers
Greg KH
- [PATCH v2 0/9] serial: samsung: rework clock lookup and add device tree support
Greg KH
- [PATCH] lib: devres: add convenience function to remap a resource
Greg KH
- [PATCH] arm: mm: Fix infinite looping issue
Girish KS
- [PATCH] arm: mm: Fix infinite looping issue
Girish KS
- [patch] ARM: smpboot: Enable interrupts after marking CPU online/active
Amit Kachhap
- [PATCH] [TRIVIAL] ARM: pxa: Fix typo 'CONFIG_BACKLIGHT_PWM__MODULE'
Nicolas Kaiser
- [PATCH v2 4/7] clk: Add simple gated clock
Saravana Kannan
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Saravana Kannan
- [PATCH v6 09/10] ARM: S5PC100: Modify platform data for pl330 driver
Boojin Kim
- [PATCH v6 10/10] ARM: S5PV210: Modify platform data for pl330 driver
Boojin Kim
- [PATCH v6 02/10] DMA: PL330: Infer transfer direction from transfer request instead of platform data
Boojin Kim
- [PATCH v6 04/10] DMA: PL330: Add device tree support
Boojin Kim
- [PATCH v6 03/10] ARM: EXYNOS4: Modify platform data for pl330 driver
Boojin Kim
- [PATCH v2] ARM: EXYNOS4: Configure MAX8997 PMIC for Origen
Kukjin Kim
- [PATCH V2 0/3] S5P64X0 PM Support
Kukjin Kim
- [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210
Kukjin Kim
- [PATCH 2/4] ARM: EXYNOS4: Support for generic Clock manipulation PM callbacks
Kukjin Kim
- [PATCH 4/4] ARM: EXYNOS4: Add power domain to use generic Power domain Framework
Kukjin Kim
- [PATCH 2/7] s3c-adc: describe features via quirk constants
Kukjin Kim
- [PATCH 2/2] ARM: SAMSUNG: Cleanup resources by using macro
Kukjin Kim
- [PATCH] ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynos
Kukjin Kim
- [GIT PULL] Samsung devel-2 for v3.2
Kukjin Kim
- [PATCH v2] ARM: EXYNOS4: Configure MAX8997 PMIC for Origen
Kukjin Kim
- [PATCH 2/2] ARM: SAMSUNG: Cleanup resources by using macro
Kukjin Kim
- [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210
Kukjin Kim
- [GIT PULL] Samsung devel-2 for v3.2
Kukjin Kim
- [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro
Kukjin Kim
- [PATCH] ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynos
Kukjin Kim
- [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro
Kukjin Kim
- [PATCH 2/7] s3c-adc: describe features via quirk constants
Kukjin Kim
- [PATCH] ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynos
Kukjin Kim
- [GIT PULL] Samsung devel-2 for v3.2
Kukjin Kim
- [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro
Kukjin Kim
- [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro
Kukjin Kim
- [PATCH v4 06/10] ARM: SoC: convert Exynos4 to SoC descriptor
Kukjin Kim
- [GIT PULL] Samsung cleanup-2 for v3.2
Kukjin Kim
- [GIT PULL] Samsung board-2 for v3.2
Kukjin Kim
- [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro
Kukjin Kim
- [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro
Kukjin Kim
- [PATCH v4 06/10] ARM: SoC: convert Exynos4 to SoC descriptor
Kukjin Kim
- [PATCH RE-SEND 1/5] ARM: S3C24XX: To merge s3c24xx devs.c files to one devs.c
Kukjin Kim
- [PATCH RE-SEND 2/5] ARM: S3C64XX: To merge devs.c files to one devs.c
Kukjin Kim
- [PATCH RE-SEND 3/5] ARM: S5P: To merge devs.c files to one devs.c
Kukjin Kim
- [PATCH RE-SEND 4/5] ARM: SAMSUNG: Cleanup plat-samsung/devs.c and devs.h
Kukjin Kim
- [PATCH V2 5/5] ARM: SAMSUNG: Cleanup resources by using macro
Kukjin Kim
- [PATCH 5/7] ARM: EXYNOS4: Add support external GIC
Kukjin Kim
- [patch] ARM: smpboot: Enable interrupts after marking CPU online/active
Kukjin Kim
- [PATCH v3 0/2] iommu/exynos: Add IOMMU and Enhance System MMU driver for Exynos4
Kukjin Kim
- [PATCH v3 1/2] ARM: EXYNOS4: Change System MMU device definition
Kukjin Kim
- [PATCH v3 2/2] iommu/exynos: Add iommu driver for Exynos Platforms
Kukjin Kim
- [PATCH v3 RE-SEND 1/2] ARM: EXYNOS4: Change System MMU device definition
Kukjin Kim
- [PATCH v3 RE-SEND 2/2] iommu/exynos: Add iommu driver for Exynos Platforms
Kukjin Kim
- [PATCH v3 1/2] ARM: EXYNOS4: Change System MMU device definition
Kukjin Kim
- [PATCH 5/7] ARM: EXYNOS4: Add support external GIC
Kukjin Kim
- [GIT PULL] Samsung devel-2 for v3.2
Kukjin Kim
- [PATCH] arm: exynos4: build is failing due to missing SZ_4K definition
Kukjin Kim
- [GIT PULL] Samsung cleanup-2 for v3.2
Kukjin Kim
- [GIT PULL] Samsung devel-2 for v3.2
Kukjin Kim
- [PATCH 2/7] s3c-adc: describe features via quirk constants
Kukjin Kim
- [patch] ARM: smpboot: Enable interrupts after marking CPU online/active
Kukjin Kim
- [PATCH] ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board
Kukjin Kim
- [PATCH V2 1/2] ARM: EXYNOS4: Add SPI support
Kukjin Kim
- [PATCH v2] ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board
Kukjin Kim
- [PATCH V3 0/4]: ARM: SAMSUNG: Add SPI clkdev support
Kukjin Kim
- [PATCH 2/5] ARM: s3c64xx: Add generic high resolution time support using PWM timers.
Kukjin Kim
- [PATCH 1/5] ARM: Samsung: PWM: Allow to differentiate SoCs based on platform device name.
Kukjin Kim
- [PATCH 2/7] s3c-adc: describe features via quirk constants
Kukjin Kim
- [PATCH] rtc: rtc-s3c: Add device tree support
Kukjin Kim
- [PATCH] ARM: S3C64XX: Enable TCM support
Kukjin Kim
- [PATCH] ARM: SAMSUNG: s3c-dma-ops needs export.h for EXPORT_SYMBOL
Kukjin Kim
- [RESEND][PATCH V2 0/2] Add a common macro for creating struct clk_lookup entries
Kukjin Kim
- [PATCH v6 00/10] Add device tree support for PL330 dma controller driver
Kukjin Kim
- [PATCH v5 0/2] Add device tree support for Samsung's keypad controller driver
Kukjin Kim
- [PATCH v6 09/10] ARM: S5PC100: Modify platform data for pl330 driver
Kukjin Kim
- [PATCH v6 00/10] Add device tree support for PL330 dma controller driver
Kukjin Kim
- [PATCH 5/7] ARM: EXYNOS4: Add support external GIC
Kukjin Kim
- [PATCH] ARM: SAMSUNG: s3c-dma-ops needs export.h for EXPORT_SYMBOL
Kukjin Kim
- [PATCH v2] ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board
Kukjin Kim
- [PATCH] gpio: exynos4: Add device tree support
Kukjin Kim
- [PATCH v3 0/5] S3C2443/S3C2416: Implement support for ADC
Kukjin Kim
- [PATCH v3] ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board
Kukjin Kim
- [PATCH] ARM: Samsung: Move fimc plat. device from board files to plat-samsung
Kukjin Kim
- [PATCH 0/8] S3C2416: Enable armdiv and armclk
Kukjin Kim
- [PATCH] ARM: S3C2443: Remove redundant s3c_register_clocks call for init_clocks
Kukjin Kim
- [PATCH] S3C2443: Add devname for hsmmc1 pclk
Kukjin Kim
- [PATCH 0/8] S3C2416: Enable armdiv and armclk
Kukjin Kim
- [PATCH 1/2] ARM: Samsung: Add Exynos4 device tree enabled board file
Kukjin Kim
- [PATCH 2/2] ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen board
Kukjin Kim
- [GIT PULL] Samsung cleanup-3 for v3.2
Kukjin Kim
- [GIT PULL] Samsung devel-3 for v3.2
Kukjin Kim
- [PATCH v2] gpio/samsung: Complain loudly if we don't know the SoC
Kukjin Kim
- [PATCH] SAMSUNG: S3C64XX: Fix SoC identification for S3C64xx devices
Kukjin Kim
- [PATCH] Fix s3c24xx build error if !CONFIG_PM
Kukjin Kim
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Kukjin Kim
- [GIT PULL] Samsung Fixes for v3.1
Kukjin Kim
- [PATCH v2] Fix s3c24xx build errors if !CONFIG_PM
Kukjin Kim
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Kukjin Kim
- [PATCH v2 0/9] serial: samsung: rework clock lookup and add device tree support
Kukjin Kim
- [PATCH] rtc: rtc-s3c: Add device tree support
Kukjin Kim
- [PATCH v5 0/2] Add device tree support for Samsung's keypad controller driver
Kukjin Kim
- [PATCH 0/2] ARM: Samsung: Add basic device tree support for Exynos4 boards
Kukjin Kim
- [PATCH V5 1/3] SDHCI: S3C: Use generic clock names for sdhci bus clock options
Kukjin Kim
- [PATCH V3 0/4]: ARM: SAMSUNG: Add SPI clkdev support
Kukjin Kim
- [PATCH V2 1/2] ARM: EXYNOS4: Add SPI support
Kukjin Kim
- [alsa-devel] [PATCH 5/6] ASoC: samsung: fix Kconfig dependencies
Sangbeom Kim
- [PATCH 0/3] ARM 4Kstacks: introduction
Andi Kleen
- [PATCH 2/3] ARM: Add static kernel function stack size analyzer, for ARM
Andi Kleen
- [PATCH 0/3] ARM 4Kstacks: introduction
Andi Kleen
- [PATCH v5] power: bq20z75: devicetree init support
Rhyland Klein
- config ARCH_AT91SAM9X5
Marc Kleine-Budde
- [PULL] i.MX
Uwe Kleine-König
- [PATCH] arm: mx23: add machine_is_stmp_378x()
Uwe Kleine-König
- Realtek ALC530 codec driver
Uwe Kleine-König
- [PATCH 1/2] [ARM] mach-types: Re-add apf9328
Uwe Kleine-König
- [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit
Uwe Kleine-König
- [PATCH] imx: add polled io uart methods
Uwe Kleine-König
- [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit
Uwe Kleine-König
- [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit
Uwe Kleine-König
- Warning at kernel/mutex.c
Uwe Kleine-König
- Warning at kernel/mutex.c
Uwe Kleine-König
- Warning at kernel/mutex.c
Uwe Kleine-König
- [PATCH] ARM: mach-mxs: fix machines' initializers order
Uwe Kleine-König
- [PATCH] arm/imx: add missing include of asm/exception.h for avic.c
Uwe Kleine-König
- [RFC][PATCH] uncompress.h cleanup and DT support
Uwe Kleine-König
- [RFC PATCH 04/15] ARM: uncompress: Only call arch_decomp_setup when needed
Uwe Kleine-König
- [RFC PATCH 08/15] ARM: uncompress: Rename misc.c to print.c
Uwe Kleine-König
- [PATCH] ARM: mx31pdk: Add MC13783 RTC support
Uwe Kleine-König
- Serious question: How long does it take to get 64bit into ARM?
Michelle Konzack
- Serious question: How long does it take to get 64bit into ARM?
Michelle Konzack
- Serious question: How long does it take to get 64bit into ARM?
Michelle Konzack
- Race condition in switch_to() / set_fs()
Alexander Korolkov
- [PATCH 1/3] sam9g20ek/9m10g45ek/stam9g20: unbreak build after 'use -EINVAL for invalid gpio'
Peter Korsgaard
- [PATCH 1/2] sam9g45: add trng clock and platform device
Peter Korsgaard
- [PATCH 2/2] hw_random: add driver for atmel true hardware random number generator
Peter Korsgaard
- [PATCH 1/3] sam9g20ek/9m10g45ek/stam9g20: unbreak build after 'use -EINVAL for invalid gpio'
Peter Korsgaard
- [PATCH 2/2] hw_random: add driver for atmel true hardware random number generator
Peter Korsgaard
- [PATCH 2/2] hw_random: add driver for atmel true hardware random number generator
Peter Korsgaard
- [PATCHv2] hw_random: add driver for atmel true hardware random number generator
Peter Korsgaard
- [PATCHv2] hw_random: add driver for atmel true hardware random number generator
Peter Korsgaard
- [PATCH] atmel_lcdfb: support new-style palette format
Peter Korsgaard
- [PATCH] atmel_lcdfb: support new-style palette format
Peter Korsgaard
- [PATCHv2] atmel_lcdfb: support new-style palette format
Peter Korsgaard
- [PATCH] atmel_lcdfb: support 16bit BGR:565 mode, remove unsupported 15bit modes
Peter Korsgaard
- [PATCH] [TRIVIAL] ARM: pxa: Fix typo 'CONFIG_BACKLIGHT_PWM__MODULE'
Jiri Kosina
- [PATCH] [TRIVIAL] ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT'
Jiri Kosina
- [PATCH 05/16] dmaengine: pl330: Enable module alias autogeneration for AMBA drivers
Vinod Koul
- [PATCH 04/16] dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers
Vinod Koul
- [PATCH 1/4] dmaengine: at_hdmac: platform data move to use .id_table
Vinod Koul
- [PATCH 3/4] ARM: at91/dma: remove platform data from DMA controller
Vinod Koul
- [PATCH v6 00/10] Add device tree support for PL330 dma controller driver
Vinod Koul
- [PATCH v6 00/10] Add device tree support for PL330 dma controller driver
Vinod Koul
- [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver
Vinod Koul
- [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver
Vinod Koul
- [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver
Vinod Koul
- [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver
Vinod Koul
- [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA
Vinod Koul
- [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA
Vinod Koul
- [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver
Vinod Koul
- [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver
Vinod Koul
- [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver
Vinod Koul
- [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver
Vinod Koul
- [PATCH v5] dmaengine: add CSR SiRFprimaII DMAC driver
Vinod Koul
- [PATCH v5 2/3] omap_twl: Prevent SR to enable for am3517/am3505 devices
Koyamangalath, Abhilash
- [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod
Tero Kristo
- sched: ARM: arch_scale_freq_power
Amit Kucheria
- sched: ARM: arch_scale_freq_power
Amit Kucheria
- [PATCH 1/3] spi/pl022: fix build warnings
Viresh Kumar
- [PATCH 2/3] spi/pl022: disable the PL022 block when unused
Viresh Kumar
- [PATCH 3/3] spi/pl022: skip default configuration before suspending
Viresh Kumar
- [PATCH] omap: dmtimer: convert printk to pr_*
Víctor M. Jáquez L.
- [PATCH v3] omap: dmtimer: convert printk to pr_err
Víctor M. Jáquez L.
- [PATCH] omap: dmtimer: convert printk to pr_*
Víctor Manuel Jáquez Leal
- [PATCH v2] omap: dmtimer: convert printk to pr_err / WARN
Víctor Manuel Jáquez Leal
- [PATCH v3] omap: dmtimer: convert printk to pr_err
Víctor Manuel Jáquez Leal
- [PATCH 0/3] ASV support for Exynos4 series
Jongpill Lee
- [PATCH 1/3] ARM: EXYNOS: Add ASV feature for Exynos4 series
Jongpill Lee
- [PATCH 2/3] ARM: EXYNOS: Add clock for Exynos4210 asv feature
Jongpill Lee
- [PATCH 3/3] ARM: EXYNOS: Support ASV for Exynos4210
Jongpill Lee
- [GIT PULL] I2C: OMAP: misc. cleanup for v3.2
Ming Lei
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Ming Lei
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Ming Lei
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Ming Lei
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Ming Lei
- [PATCH 0/3] ARM 4Kstacks: introduction
Ming Lei
- [PATCH 0/3] ARM 4Kstacks: introduction
Ming Lei
- Perf support for OMAP4
Ming Lei
- [PATCH v5 3/7] arm: perf: support device with other non-irq resources
Ming Lei
- [PATCH v5 3/7] arm: perf: support device with other non-irq resources
Ming Lei
- [PATCH v5 2/7] arm: pmu: allow platform specific irq enable/disable handling
Ming Lei
- [PATCH] mach-kirkwood: Add support for D-Link DNS-325
Jamie Lentin
- [PATCH V2] mach-kirkwood: Add support for D-Link DNS-325
Jamie Lentin
- [PATCH v4 2/3] at91: add parameters for at91_add_device_isi function
Guennadi Liakhovetski
- [PATCH v4 3/3] at91: add Atmel ISI and ov2640 support on sam9m10/sam9g45 board
Guennadi Liakhovetski
- [PATCH v4 1/3] [media] at91: add code to enable/disable ISI_MCK clock
Guennadi Liakhovetski
- [RFC PATCH v3] drivercore: Add driver probe deferral mechanism
Grant Likely
- [RFC PATCH v3] drivercore: Add driver probe deferral mechanism
Grant Likely
- [RFC PATCH] tty/serial: atmel_serial: add device tree support
Grant Likely
- [RFC PATCH] tty/serial: atmel_serial: add device tree support
Grant Likely
- [PATCH 8/9] regulator: helper to extract regulator node based on supply name
Grant Likely
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Grant Likely
- [PATCH v2 6/7] clk: Add initial WM831x clock driver
Grant Likely
- [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader
Grant Likely
- [PATCH] drivers: create a pin control subsystem v8
Grant Likely
- [PATCH v2 6/7] clk: Add initial WM831x clock driver
Grant Likely
- [RFC PATCH v3] drivercore: Add driver probe deferral mechanism
Grant Likely
- [PATCH 1/3] irq: support domains with non-zero hwirq base
Grant Likely
- [PATCH 2/3] ARM: gic: add irq_domain support
Grant Likely
- [PATCH 3/3] ARM: gic: add OF based initialization
Grant Likely
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH 06/16] gpio: pl061: Enable module alias autogeneration for AMBA drivers
Grant Likely
- [PATCH 11/16] spi: pl022: Enable module alias autogeneration for AMBA drivers
Grant Likely
- [PULL] Devicetree for 3.2
Grant Likely
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Grant Likely
- [PATCH 4/5] gpiolib: handle deferral probe error
Grant Likely
- [PATCH 1/5] drivercore: add new error value for deferred probe
Grant Likely
- [PATCH 5/5] omap: hsmmc: use platform_driver_register
Grant Likely
- [PATCH 1/5] drivercore: add new error value for deferred probe
Grant Likely
- [PATCH] MAINTAINERS: Update tegra maintainer information
Grant Likely
- [PATCH v4 3/4] gpio/tegra: Convert to a platform device
Grant Likely
- [PATCH v4 3/4] gpio/tegra: Convert to a platform device
Grant Likely
- [PATCH v3 1/4] dmaengine: at_hdmac: platform data move to use .id_table
Grant Likely
- [PATCH v3 2/4] dmaengine: at_hdmac: add device tree support
Grant Likely
- [PATCH v3 3/4] ARM: at91/dma: remove platform data from DMA controller
Grant Likely
- [PATCH v3 4/4] ARM: at91/dma: DMA controller registering with DT support
Grant Likely
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Grant Likely
- [PATCH 3/3] ARM: Exynos4: Add support for dt irq specifier to linux virq conversion
Grant Likely
- [PATCH] gpio: exynos4: Add device tree support
Grant Likely
- [PATCH] gpio: exynos4: Add device tree support
Grant Likely
- [PATCH v2 2/5] tty/serial: atmel_serial: change platform_data variable name
Grant Likely
- [PATCH v2 1/5] tty/serial: RS485 bindings for device tree
Grant Likely
- [PATCH v2 3/5] tty/serial: atmel_serial: whitespace and braces modifications
Grant Likely
- [PATCH v2 4/5] tty/serial: atmel_serial: auto-enumerate ports
Grant Likely
- [PATCH v2 5/5] tty/serial: atmel_serial: add device tree support
Grant Likely
- [PATCH 1/2] drivers: create a pin control subsystem v9
Grant Likely
- [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions
Grant Likely
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Grant Likely
- [PATCH 1/5] drivercore: add new error value for deferred probe
Grant Likely
- [PATCH 4/5] gpiolib: handle deferral probe error
Grant Likely
- [RFC PATCH v3] drivercore: Add driver probe deferral mechanism
Grant Likely
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Grant Likely
- [PATCH 1/2] ARM: Samsung: Add Exynos4 device tree enabled board file
Grant Likely
- [PATCH 2/2] ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen board
Grant Likely
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Grant Likely
- [PATCH v2 2/5] dt: add empty dt helpers for non-dt build
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH v2 4/5] regulator: adapt fixed regulator driver to dt
Grant Likely
- [PATCH v2 5/5] regulator: map consumer regulator based on device tree
Grant Likely
- [PATCH v4 1/8] ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ
Grant Likely
- [PATCH v4 2/8] ARM: pxa: use chained interrupt for GPIO0 and GPIO1
Grant Likely
- [PATCH v4 3/8] ARM: pxa: rename gpio_to_irq and irq_to_gpio
Grant Likely
- [PATCH v4 4/8] ARM: pxa: rename NR_BUILTIN_GPIO
Grant Likely
- [PATCH v4 5/8] ARM: pxa: change gpio driver to platform driver
Grant Likely
- [PATCH v4 6/8] ARM: pxa: move gpio-pxa.h into include directory
Grant Likely
- [PATCH v4 7/8] ARM: pxa: add clk support in gpio driver
Grant Likely
- [PATCH v2] irq: support domains with non-zero hwirq base
Grant Likely
- [PATCH] rtc: rtc-s3c: Add device tree support
Grant Likely
- [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage
Grant Likely
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Grant Likely
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Grant Likely
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Grant Likely
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Grant Likely
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Grant Likely
- [PATCH] gpio/samsung: Complain loudly if we don't know the SoC
Grant Likely
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Grant Likely
- [PATCH] drivers: create a pin control subsystem v8
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH v4 1/2] dmaengine: at_hdmac: platform data move to use .id_table
Grant Likely
- [PATCH] dt: Add empty of_match_node() macro
Grant Likely
- [PATCH] drivers: create a pin control subsystem v8
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH v2 4/9] serial: samsung: remove struct 's3c24xx_uart_clksrc' and all uses of it
Grant Likely
- [PATCH v2 9/9] serial: samsung: add device tree support
Grant Likely
- [RFC 3/4] lib: devres: add convenience function to remap a resource
Grant Likely
- [RFC 4/4] watchdog: imx2: simplify resource allocation
Grant Likely
- [PATCH] spi/pl022: Enable clock in probe an use runtime_idle
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH] dt: Add empty of_match_node() macro
Grant Likely
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH] of: Add a reg-names property to name reg entries
Grant Likely
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Grant Likely
- [PATCH v2] gpio: pl061: add DT binding support
Grant Likely
- [PATCH] gpio: pl061: add DT binding support
Grant Likely
- [PATCH] of: Add a reg-names property to name reg entries
Grant Likely
- [PATCH] drivers: create a pin control subsystem v8
Grant Likely
- [PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h
Grant Likely
- [PATCH] lib: devres: add convenience function to remap a resource
Grant Likely
- [PATCH] regulator: Use regmap_read/write(), regmap_update_bits functions directly
Grant Likely
- [git pull] trivial gpio build failure fixups
Grant Likely
- [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00
Grant Likely
- [PATCH] ARM: mark empty gpio.h files empty
Grant Likely
- [git pull] trivial gpio build failure fixups
Grant Likely
- [PATCH] dt: add empty of_alias_get_id() for non-dt builds
Grant Likely
- [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00
Grant Likely
- [PATCH] ARM: SAMSUNG: s3c-dma-ops needs export.h for EXPORT_SYMBOL
Axel Lin
- [PATCH] ARM: SAMSUNG: s3c-dma-ops needs export.h for EXPORT_SYMBOL
Axel Lin
- [PATCH 04/30] ARM: omap: add missing __devexit_p() annotations
Tony Lindgren
- [PATCH 04/30] ARM: omap: add missing __devexit_p() annotations
Tony Lindgren
- [PATCH 05/30] ARM: omap: enable building omap2 without omap2420/2430
Tony Lindgren
- [PATCH 08/30] ARM: omap2+: fix building without i2c
Tony Lindgren
- [PATCH 09/30] ARM: omap2: export functions used by nand driver
Tony Lindgren
- [PATCH 10/30] ARM: omap/iommu: always provide iommu debug code
Tony Lindgren
- [PATCH 11/30] ARM: omap2/n8x0: work around modular omap mmc
Tony Lindgren
- [PATCH 12/30] ARM: omap4: always build omap_phy_internal
Tony Lindgren
- [PATCH 13/30] ARM: omap2+: fix omap_hdq_init compilation
Tony Lindgren
- [PATCH 17/30] usb/musb: allow building USB_MUSB_TUSB6010 as a module
Tony Lindgren
- [PATCH 23/30] ARM: omap2: select twl4030 support on boards that need it
Tony Lindgren
- [PATCH 24/30] ARM: omap2+: ensure that one of omap2/3/4 is selected
Tony Lindgren
- [PATCH 25/30] ARM: OMAP depends on MMU
Tony Lindgren
- [PATCH 26/30] ARM: omap: add board autoselection
Tony Lindgren
- [PATCH 27/30] ARM: omap: select L2X0 cache on omap4
Tony Lindgren
- [PATCH 29/30] ARM: omap: select USB_ARCH_HAS_EHCI only when USB is enabled
Tony Lindgren
- [PATCH 30/30] ARM: omap2: select ARM_AMBA for OMAP3_EMU
Tony Lindgren
- [PATCH 00/30] ARM/omap: omap specific randconfig fixes
Tony Lindgren
- [PATCH] usb: musb: OMAP4430: Remove a redundant omap4430_phy_init call in usb_musb_init
Tony Lindgren
- [GIT PULL] omap fixes for -rc series and merge window
Tony Lindgren
- Please help with the OMAP static mapping mess
Tony Lindgren
- Please help with the OMAP static mapping mess
Tony Lindgren
- Please help with the OMAP static mapping mess
Tony Lindgren
- [GIT PULL] dmtimer changes for v3.2 merge window
Tony Lindgren
- [GIT PULL] l3 cleanup for v3.2 merge window
Tony Lindgren
- [PATCH v16 00/12] OMAP: dmtimer: adaptation to platform_driver
Tony Lindgren
- [PATCH 26/30] ARM: omap: add board autoselection
Tony Lindgren
- Please help with the OMAP static mapping mess
Tony Lindgren
- [PATCH 1/4] ARM: OMAP3 PM: Fix IO Daisychain sequence
Tony Lindgren
- Please help with the OMAP static mapping mess
Tony Lindgren
- [PATCH 0/4] initialize omap SRAM later on with __arm_ioremap_exec()
Tony Lindgren
- [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
Tony Lindgren
- [PATCH 2/4] ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done
Tony Lindgren
- [PATCH 3/4] ARM: OMAP: Remove calls to SRAM allocations for framebuffer
Tony Lindgren
- [PATCH 4/4] ARM: OMAP: Map SRAM later on with ioremap_exec()
Tony Lindgren
- [GIT PULL] initial omap DT support for v3.2 merge window (Re: [PATCH 26/30] ARM: omap: add board autoselection)
Tony Lindgren
- Please help with the OMAP static mapping mess
Tony Lindgren
- [PATCH 5/4] ARM: OMAP: Move set_globals initialization to happen in init_early
Tony Lindgren
- [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
Tony Lindgren
- [PATCH 1.5/4] ARM: OMAP1: Use generic map_io, init_early and init_irq
Tony Lindgren
- [PATCH 4/4] ARM: OMAP: Map SRAM later on with ioremap_exec()
Tony Lindgren
- [PATCH 3/4] ARM: OMAP: Remove calls to SRAM allocations for framebuffer
Tony Lindgren
- [PATCH 5/4] ARM: OMAP: Move set_globals initialization to happen in init_early
Tony Lindgren
- [PATCH 0/4] initialize omap SRAM later on with __arm_ioremap_exec()
Tony Lindgren
- [PATCH 3/4] ARM: OMAP: Remove calls to SRAM allocations for framebuffer
Tony Lindgren
- [PATCH v3 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM
Tony Lindgren
- [PATCH 0/2] AM3517EVM: Add support for MMC1
Tony Lindgren
- [PATCH 0/2] OMAP: Update nr_irqs field in machine descriptors
Tony Lindgren
- [PATCH] OMAP2: Devkit8000: Remove double omap_mux_init_gpio
Tony Lindgren
- [PATCH] ARM: OMAP2+: dmtimer: Fix warning
Tony Lindgren
- [PATCH v2 0/2] arm: omap4: hsmmc: pbias fixes
Tony Lindgren
- ARM SoC tree: OMAP PM dependency on tip irq/core
Tony Lindgren
- [PATCH 0/2] ARM: OMAP2+: timer fixes / cleanup
Tony Lindgren
- [PATCH v2] omap: dmtimer: convert printk to pr_err / WARN
Tony Lindgren
- [PATCH] ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list
Tony Lindgren
- [PATCH] ARM: OMAP2: Fix H4 matrix keyboard warning
Tony Lindgren
- [PATCH-V3 2/4] arm:omap:am33xx: Update common OMAP machine specific sources
Tony Lindgren
- [PATCH-V3 1/4] arm:omap:am33xx: Update common omap platform files
Tony Lindgren
- [PATCH-V3 3/4] arm:omap:am33xx: Create board support and enable build for AM335XEVM
Tony Lindgren
- [PATCH-V3 4/4] arm:omap:am33xx: Add low level debugging support
Tony Lindgren
- [PATCH v2] ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list
Tony Lindgren
- [PATCH] ARM: OMAP1: Fix warnings about enabling 32 KiHz timer
Tony Lindgren
- [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
Tony Lindgren
- [PATCH 0/4] initialize omap SRAM later on with __arm_ioremap_exec()
Tony Lindgren
- [PATCH 5/4] ARM: OMAP: Move set_globals initialization to happen in init_early
Tony Lindgren
- [PATCH 4/4] ARM: OMAP: Map SRAM later on with ioremap_exec()
Tony Lindgren
- [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
Tony Lindgren
- [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
Tony Lindgren
- [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
Tony Lindgren
- [PATCH] ARM: mmp: map sram as MT_MEMORY rather than MT_DEVICE
Tony Lindgren
- [PATCH 1/3] ARM: mmp: add sram allocator
Tony Lindgren
- [GIT PULL] omap fixes for -rc series and merge window
Tony Lindgren
- [PATCH 0/7] Repost of omap SRAM map_io changes
Tony Lindgren
- [PATCH 1/7] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
Tony Lindgren
- [PATCH 2/7] ARM: OMAP1: Use generic map_io, init_early and init_irq
Tony Lindgren
- [PATCH 3/7] ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done
Tony Lindgren
- [PATCH 4/7] ARM: OMAP: Remove calls to SRAM allocations for framebuffer
Tony Lindgren
- [PATCH 5/7] ARM: OMAP: Map SRAM later on with ioremap_exec()
Tony Lindgren
- [PATCH 6/7] ARM: OMAP: Move set_globals initialization to happen in init_early
Tony Lindgren
- [PATCH 7/7] ARM: OMAP: Warn if omap_ioremap is called before SoC detection
Tony Lindgren
- [PATCH 1/7] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
Tony Lindgren
- [PATCH] ARM: OMAP1: Fix warnings about enabling 32 KiHz timer
Tony Lindgren
- [PATCH 0/2] OMAP: Update nr_irqs field in machine descriptors
Tony Lindgren
- [PATCH 1/7] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
Tony Lindgren
- [PATCH] ARM: zImage: Use $(CROSS_COMPILE)size to get .bss size
Tony Lindgren
- [GIT PULL] initial omap DT support for v3.2 merge window (Re: [PATCH 26/30] ARM: omap: add board autoselection)
Tony Lindgren
- [RFC/PATCH v4 4/7] ARM: ARM11 MPCore: clean_dcache_area is not preempt safe
Tony Lindgren
- [RFC/PATCH v4 4/7] ARM: ARM11 MPCore: clean_dcache_area is not preempt safe
Tony Lindgren
- Build error while adding debug LL support for new board
Tony Lindgren
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Tony Lindgren
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Tony Lindgren
- Build error while adding debug LL support for new board
Tony Lindgren
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Tony Lindgren
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Tony Lindgren
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Tony Lindgren
- [GIT PULL] pending DT patches and cleanup for map_io for v3.2 merge window
Tony Lindgren
- [RFC PATCH 14/15] ARM: uncompress: Get decompress UART info from DT
Tony Lindgren
- GIC MULTI_IRQ_HANDLER branches
Tony Lindgren
- [PATCH 01/12] ARM: clean up idle handlers
Tony Lindgren
- [PATCH] drivers: create a pin control subsystem v8
Tony Lindgren
- [PATCH] of: Add a reg-names property to name reg entries
Tony Lindgren
- GIC MULTI_IRQ_HANDLER branches
Tony Lindgren
- [PATCH] of: Add a reg-names property to name reg entries
Tony Lindgren
- [GIT PULL] pending DT patches and cleanup for map_io for v3.2 merge window
Tony Lindgren
- [PATCH v4] ARM: cache-l2x0: add resume entry for l2 in secure mode
Russell King - ARM Linux
- [PATCH v4 3/7] arm/imx: add gic_handle_irq function
Russell King - ARM Linux
- [PATCH 1/2] ARM: CLKDEV: Add Common Macro for clk_lookup
Russell King - ARM Linux
- [PATCH 2/2] ARM: Switch to using CLKDEV_INIT macro for creating clk_lookup instance
Russell King - ARM Linux
- [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets
Russell King - ARM Linux
- [PATCH 4/4] mmc: mmci: Fix incorrect handling of HW flow control for SDIO
Russell King - ARM Linux
- nr_cpus cmdline parameter not working
Russell King - ARM Linux
- [PATCH] Add missing include of linux/ftrace.h
Russell King - ARM Linux
- [PATCH] ARM: localtimer: add header linux/errno.h explicitly
Russell King - ARM Linux
- [PATCH v2 0/5] ARM: pxa: move gpio driver into drivers directory
Russell King - ARM Linux
- [RFC PATCH 0/3] ARM: amba: defining module aliases for AMBA driver autoloading
Russell King - ARM Linux
- [PATCH v2 0/5] ARM: pxa: move gpio driver into drivers directory
Russell King - ARM Linux
- [PATCH] Add platform driver support to the CS890x driver
Russell King - ARM Linux
- [PATCH] Add missing include of linux/ftrace.h
Russell King - ARM Linux
- [PATCH v2] mach-ep93xx: break out GPIO driver specifics
Russell King - ARM Linux
- [PATCH 1/2 v2] plat-pxa: move PXA GPIO driver to GPIO subsystem
Russell King - ARM Linux
- [PATCH 2/2 v2] plat-pxa: break out GPIO driver specifics
Russell King - ARM Linux
- [PATCH 2/2] ARM: SAMSUNG: Cleanup resources by using macro
Russell King - ARM Linux
- [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210
Russell King - ARM Linux
- [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210
Russell King - ARM Linux
- [PATCH 01/11] ARM: export rtc_lock for nvram driver
Russell King - ARM Linux
- [PATCH 00/11] Generic ARM fixes for randconfig
Russell King - ARM Linux
- [PATCH 00/11] Generic ARM fixes for randconfig
Russell King - ARM Linux
- [PATCH 11/30] ARM: omap2/n8x0: work around modular omap mmc
Russell King - ARM Linux
- [PATCH 16/26] ARM: pxa: CPU_PJ4 requires IWMMXT
Russell King - ARM Linux
- [PATCH 04/30] ARM: omap: add missing __devexit_p() annotations
Russell King - ARM Linux
- [PATCH 15/30] usb/musb: use a Kconfig choice to pick the right DMA method
Russell King - ARM Linux
- [PATCH 3/3] tty/serial: atmel_serial: __devinit_p for probe function
Russell King - ARM Linux
- [PATCH V2] AT91: dt: at91sam9g45 family and board device tree files
Russell King - ARM Linux
- [PATCH] ARM: S3C2410: Remove section mismatch warning
Russell King - ARM Linux
- [GIT PULL] Samsung devel-2 for v3.2
Russell King - ARM Linux
- [PATCH v4] ARM: cache-l2x0: add resume entry for l2 in secure mode
Russell King - ARM Linux
- [PATCH 2/6] ASoC: codecs: AK4641 depends on GPIOLIB
Russell King - ARM Linux
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Russell King - ARM Linux
- Please help with the OMAP static mapping mess
Russell King - ARM Linux
- Please help with the OMAP static mapping mess
Russell King - ARM Linux
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Russell King - ARM Linux
- [RFC/PATCH 7/7] ARM: ARM11 MPCore: cpu_v6_set_pte_ext is not preempt safe
Russell King - ARM Linux
- [PATCH 0/2] Make IPI and localtimer handlers callable from C code
Russell King - ARM Linux
- [PATCH 1/3 v3] ARM Realview PCIX map include file changes
Russell King - ARM Linux
- [PATCH] arm: Add VIRTUALIZATION configuration menu and virtio options
Russell King - ARM Linux
- [RFC/PATCH 1/7] ARM: ARM11 MPCore: pgd_alloc is not preempt safe
Russell King - ARM Linux
- [RFC/PATCH 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe
Russell King - ARM Linux
- [PATCH 1/2] arm: samsung: move timer irq numbers to end of linux irq space
Russell King - ARM Linux
- [PATCH v2] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection
Russell King - ARM Linux
- [PATCH] ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list
Russell King - ARM Linux
- [RFC/PATCH 2/7] ARM: ARM11 MPCore: pte_alloc_one{,_kernel} are not preempt safe
Russell King - ARM Linux
- [PATCH 13/26] ARM: pxa: use correct __iomem annotations
Russell King - ARM Linux
- [PATCH v3] omap: dmtimer: convert printk to pr_err
Russell King - ARM Linux
- [PATCH v3 1/2] ARM: EXYNOS4: Change System MMU device definition
Russell King - ARM Linux
- [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets
Russell King - ARM Linux
- [PATCH v3] omap: dmtimer: convert printk to pr_err
Russell King - ARM Linux
- [PATCH 1/5 v4] ARM Realview PCIX map include file changes
Russell King - ARM Linux
- [PATCH v3] omap: dmtimer: convert printk to pr_err
Russell King - ARM Linux
- [PATCH] ARM: PM: build sleep/suspend code for idle path also (not only suspend)
Russell King - ARM Linux
- [PATCH] ARM: PM: build sleep/suspend code for idle path also (not only suspend)
Russell King - ARM Linux
- [PATCH 4/5 v4] Realview PCIX support - add main support module code
Russell King - ARM Linux
- [PATCH 06/26] ARM: pxa: add missing header inclusions
Russell King - ARM Linux
- [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets
Russell King - ARM Linux
- [PATCH 1/2] [ARM] mach-types: Re-add apf9328
Russell King - ARM Linux
- [PATCH 1/5 v4] ARM Realview PCIX map include file changes
Russell King - ARM Linux
- [PATCH 4/5 v4] Realview PCIX support - add main support module code
Russell King - ARM Linux
- [PATCH] arm: fix handling of nr_cpus
Russell King - ARM Linux
- [GIT PULL] DEBUG_LL platform updates for 3.2
Russell King - ARM Linux
- [GIT PULL] DEBUG_LL platform updates for 3.2
Russell King - ARM Linux
- [GIT PULL] DEBUG_LL platform updates for 3.2
Russell King - ARM Linux
- [GIT PULL] DEBUG_LL platform updates for 3.2
Russell King - ARM Linux
- [PATCHv2] ARM: zImage: Use $(CROSS_COMPILE)size to get .bss size
Russell King - ARM Linux
- change_page_attr() implementation for ARM?
Russell King - ARM Linux
- [PATCH V4 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
Russell King - ARM Linux
- [PATCH 3/9] ARM: SPMP8000: Add clk support
Russell King - ARM Linux
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Russell King - ARM Linux
- [PATCH 9/9] ARM: SPMP8000: Add Kconfig and Makefile entries to build the machine
Russell King - ARM Linux
- [PATCH 8/9] ARM: SPMP8000: Add support for the Letcool board
Russell King - ARM Linux
- [PATCH 1/2] [ARM] mach-types: Re-add apf9328
Russell King - ARM Linux
- [PATCH V2 1/2] ARM: EXYNOS4: Add SPI support
Russell King - ARM Linux
- [RESEND][PATCH V2 0/2] Add a common macro for creating struct clk_lookup entries
Russell King - ARM Linux
- [RESEND][PATCH V2 1/2] ARM: CLKDEV: Add Common Macro for clk_lookup
Russell King - ARM Linux
- [PATCH v5 00/10] Per SoC descriptor
Russell King - ARM Linux
- [RFC 1/5] ARM: dev_archdata: add private iommu extension
Russell King - ARM Linux
- [PATCH 5/7] ARM: EXYNOS4: Add support external GIC
Russell King - ARM Linux
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Russell King - ARM Linux
- [GIT PULL] DEBUG_LL platform updates for 3.2
Russell King - ARM Linux
- [PATCH v2 01/14] ARM: tegra: annotate IO_*_VIRT pointers
Russell King - ARM Linux
- [PATCH 2/5] ARM: s3c64xx: Add generic high resolution time support using PWM timers.
Russell King - ARM Linux
- [PATCH] mmc: mmci: Do not release spinlock in request_end
Russell King - ARM Linux
- [RFC/PATCH 3/7] ARM: ARM11 MPCore: {clean,flush}_pmd_entry are not preempt safe
Russell King - ARM Linux
- [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>
Russell King - ARM Linux
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Russell King - ARM Linux
- [PATCH v2 4/7] clk: Add simple gated clock
Russell King - ARM Linux
- [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>
Russell King - ARM Linux
- [PATCH] arm: omap: Fix errors and warnings when building for one board
Russell King - ARM Linux
- [PATCH] arm: fix handling of nr_cpus
Russell King - ARM Linux
- [PATCH] arm: omap: Fix errors and warnings when building for one board
Russell King - ARM Linux
- [PATCH v5 00/10] Per SoC descriptor
Russell King - ARM Linux
- [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets
Russell King - ARM Linux
- [PATCH 2/2] arm/mx5: add device tree support for imx51 babbage
Russell King - ARM Linux
- [PATCH v3.1-rc9] ARM: populate processor tag in proc-cpuinfo for Uni-processor.
Russell King - ARM Linux
- [PATCH 00/16] ARM: amba: Enable module alias autogeneration for AMBA drivers
Russell King - ARM Linux
- [PATCH v4 0/4] genirq: handling GIC per-cpu interrupts
Russell King - ARM Linux
- [PATCH v3.1-rc9] ARM: populate processor tag in proc-cpuinfo for Uni-processor.
Russell King - ARM Linux
- [PATCH] AT91: Add external RTC for Flexibity board
Russell King - ARM Linux
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Russell King - ARM Linux
- [PATCH] mmc: mmci: Do not release spinlock in request_end
Russell King - ARM Linux
- [PATCH] mmc: mmci: Do not release spinlock in request_end
Russell King - ARM Linux
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Russell King - ARM Linux
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Russell King - ARM Linux
- [PATCH v4 5/8] ARM: pxa: change gpio driver to platform driver
Russell King - ARM Linux
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Russell King - ARM Linux
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Russell King - ARM Linux
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Russell King - ARM Linux
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Russell King - ARM Linux
- [PATCH v2] mach-ep93xx: break out GPIO driver specifics
Russell King - ARM Linux
- [PATCH 6/9] drivers: add Contiguous Memory Allocator
Russell King - ARM Linux
- [PATCH 2/9] ARM: SPMP8000: Add machine base files
Russell King - ARM Linux
- [GIT PULL] DEBUG_LL platform updates for 3.2
Russell King - ARM Linux
- [PATCH 1/2] [ARM] mach-types: Re-add apf9328
Russell King - ARM Linux
- [PATCH 1/2] [ARM] mach-types: Re-add apf9328
Russell King - ARM Linux
- READ THIS: the next mach-types update
Russell King - ARM Linux
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Russell King - ARM Linux
- [PATCH 2/3] spi/pl022: disable the PL022 block when unused
Russell King - ARM Linux
- [PATCH 3/3] spi/pl022: skip default configuration before suspending
Russell King - ARM Linux
- [PATCH 3/9] ARM: SPMP8000: Add clk support
Russell King - ARM Linux
- [PATCH v6 0/2] Add device tree support for i.mx51/53 boards
Russell King - ARM Linux
- [PATCH] amba: be more careful in runtime_suspend/resume
Russell King - ARM Linux
- Warning at kernel/mutex.c
Russell King - ARM Linux
- [PATCH 0/3] ARM 4Kstacks: introduction
Russell King - ARM Linux
- [PATCH v4 0/4] genirq: handling GIC per-cpu interrupts
Russell King - ARM Linux
- [PATCH] arm: fix handling of nr_cpus
Russell King - ARM Linux
- [GIT PULL] genirq support for GIC PPIs
Russell King - ARM Linux
- select consuming too much cpu time when changing from kernel 2.6.29 to 2.6.34
Russell King - ARM Linux
- [GIT PULL] GIC DT binding support
Russell King - ARM Linux
- Build error while adding debug LL support for new board
Russell King - ARM Linux
- [GIT PULL] genirq support for GIC PPIs
Russell King - ARM Linux
- Build error while adding debug LL support for new board
Russell King - ARM Linux
- [GIT PULL] GIC DT binding support
Russell King - ARM Linux
- [GIT PULL] GIC DT binding support
Russell King - ARM Linux
- [GIT PULL] i.MX6Q support
Russell King - ARM Linux
- [PATCH] mmc: mmci: Improve runtime PM support
Russell King - ARM Linux
- [PATCH 1/2] [ARM] mach-types: Re-add apf9328
Russell King - ARM Linux
- [GIT PULL] GIC DT binding support
Russell King - ARM Linux
- [GIT PULL] GIC DT binding support
Russell King - ARM Linux
- [PATCH v2 1/5] ARM: SPMP8000: Add machine base files
Russell King - ARM Linux
- [PATCH 0/3] ARM 4Kstacks: introduction
Russell King - ARM Linux
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
Russell King - ARM Linux
- [PATCH 02/14] ARM : SAMSUNG : Add RS485 support.
Russell King - ARM Linux
- [PATCH] ARM: gic: fix irq_alloc_descs handling for sparse irq
Russell King - ARM Linux
- [RFC][PATCH] uncompress.h cleanup and DT support
Russell King - ARM Linux
- [RFC][PATCH] uncompress.h cleanup and DT support
Russell King - ARM Linux
- [RFC][PATCH] uncompress.h cleanup and DT support
Russell King - ARM Linux
- [PATCH v7 08/16] ARM: LPAE: Page table maintenance for the 3-level format
Russell King - ARM Linux
- [PATCH v7 11/16] ARM: LPAE: Add fault handling support
Russell King - ARM Linux
- [PATCH v7 13/16] ARM: LPAE: Add identity mapping support for the 3-level page table format
Russell King - ARM Linux
- [PATCH v7 15/16] ARM: LPAE: add support for ATAG_MEM64
Russell King - ARM Linux
- [PATCH v7 16/16] ARM: LPAE: Add the Kconfig entries
Russell King - ARM Linux
- [PATCH 0/3] ARM 4Kstacks: introduction
Russell King - ARM Linux
- [PATCH 02/14] ARM : SAMSUNG : Add RS485 support.
Russell King - ARM Linux
- [PATCH] mmc: mmci: Improve runtime PM support
Russell King - ARM Linux
- [GIT PULL] i.MX6Q support
Russell King - ARM Linux
- [RFC PATCH 07/15] ARM: uncompress: Move decompressing related stuff to decompress.c
Russell King - ARM Linux
- [RFC PATCH 07/15] ARM: uncompress: Move decompressing related stuff to decompress.c
Russell King - ARM Linux
- [RFC PATCH 09/15] ARM: uncompress: Introduce ucuart as low-level serial port driver
Russell King - ARM Linux
- [RFC PATCH 13/15] ARM: uncompress.h: Cleanup header guards and banners
Russell King - ARM Linux
- [RFC PATCH 14/15] ARM: uncompress: Get decompress UART info from DT
Russell King - ARM Linux
- [PATCH] mmc: mmci: Improve runtime PM support
Russell King - ARM Linux
- [PATCH] mmc: mmci: Improve runtime PM support
Russell King - ARM Linux
- [PATCH] mmc: mmci: Improve runtime PM support
Russell King - ARM Linux
- [PATCH] mmc: mmci: Improve runtime PM support
Russell King - ARM Linux
- [PATCH] Shrink thread_info a bit
Russell King - ARM Linux
- [PATCH] spi/pl022: Enable clock in probe an use runtime_idle
Russell King - ARM Linux
- [PATCH] Shrink thread_info a bit
Russell King - ARM Linux
- [PATCH] Shrink thread_info a bit
Russell King - ARM Linux
- [PATCH 01/12] ARM: clean up idle handlers
Russell King - ARM Linux
- GIC MULTI_IRQ_HANDLER branches
Russell King - ARM Linux
- [PATCH 01/12] ARM: clean up idle handlers
Russell King - ARM Linux
- [PATCH 08/12] ARM: mach-ixp4xx: properly disable CPU idle call
Russell King - ARM Linux
- [PATCH 2/2] [ARM] MX1:apf9328: Add i2c support
Russell King - ARM Linux
- [PATCHv2] msm: boards: Fix fallout from removal of machine_desc in fixup
Russell King - ARM Linux
- [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver
Russell King - ARM Linux
- [PATCH v5 03/11] ARM: pxa: rename gpio_to_irq and irq_to_gpio
Russell King - ARM Linux
- [PATCH v5 06/11] ARM: pxa: remove head file in plat-pxa
Russell King - ARM Linux
- [PATCH v5 08/11] ARM: pxa: use generic gpio operation instead of gpio register
Russell King - ARM Linux
- [PATCH v5 11/11] ARM: pxa: add clk support in gpio driver
Russell King - ARM Linux
- [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers
Russell King - ARM Linux
- [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers
Russell King - ARM Linux
- [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers
Russell King - ARM Linux
- [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend
Russell King - ARM Linux
- [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend
Russell King - ARM Linux
- [PATCH 3/6] arm/tegra: prepare early init for multiple tegra variants
Russell King - ARM Linux
- [PATCH 4/6] arm/tegra: implement support for tegra30
Russell King - ARM Linux
- [GIT PULL] pending DT patches and cleanup for map_io for v3.2 merge window
Russell King - ARM Linux
- [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers
Russell King - ARM Linux
- [PATCH 3/3] ARM: EXYNOS: Support ASV for Exynos4210
Russell King - ARM Linux
- [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00
Russell King - ARM Linux
- [PATCH] ramoops appears geared to not support ARM
Russell King - ARM Linux
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Russell King - ARM Linux
- [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00
Russell King - ARM Linux
- [PATCH] ramoops appears geared to not support ARM
Russell King - ARM Linux
- [PATCH] ramoops appears geared to not support ARM
Russell King - ARM Linux
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Russell King - ARM Linux
- [PATCH] mach-ixp4xx: made gpio functions atomic
Russell King - ARM Linux
- [PATCH] s3c2410: remove __ioaddrc()
Russell King - ARM Linux
- Serious question: How long does it take to get 64bit into ARM?
Russell King - ARM Linux
- [RFC PATCH] arm: dma: Drop GFP_COMP for DMA memory allocations
Russell King - ARM Linux
- [PATCH] mach-ixp4xx: made gpio functions atomic
Russell King - ARM Linux
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Russell King - ARM Linux
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Russell King - ARM Linux
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Russell King - ARM Linux
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Russell King - ARM Linux
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Russell King - ARM Linux
- [PATCH 1/3] Add support for mini-box.com picoSAM9G45 board
Russell King - ARM Linux
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Russell King - ARM Linux
- orion/kirkwood and device tree
Russell King - ARM Linux
- [PATCH] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file
Pavel Machek
- [PATCH] PM: HIBERNATION: add resume_delay kernel param as well as resume_delay
Pavel Machek
- [GIT PULL] DEBUG_LL platform updates for 3.2
Ryan Mallon
- [GIT PULL] DEBUG_LL platform updates for 3.2
Ryan Mallon
- [PATCH] ARM: OMAP: Fix early init definitions
Kyle Manna
- [PATCH] ARM: OMAP: Add support for AM35xx UART4/ttyO3
Kyle Manna
- [PATCH 2/3] define ARM-specific dma_coherent_write_sync
Catalin Marinas
- [PATCH 1/3 v3] ARM Realview PCIX map include file changes
Catalin Marinas
- [RFC/PATCH 3/7] ARM: ARM11 MPCore: {clean,flush}_pmd_entry are not preempt safe
Catalin Marinas
- [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>
Catalin Marinas
- Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011
Catalin Marinas
- Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011
Catalin Marinas
- change_page_attr() implementation for ARM?
Catalin Marinas
- change_page_attr() implementation for ARM?
Catalin Marinas
- [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>
Catalin Marinas
- Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011
Catalin Marinas
- [PATCH v7 08/16] ARM: LPAE: Page table maintenance for the 3-level format
Catalin Marinas
- Serious question: How long does it take to get 64bit into ARM?
Catalin Marinas
- [RFC PATCH 0/3] ARM: amba: defining module aliases for AMBA driver autoloading
Dave Martin
- [PATCH 05/11] ARM: vfp: use -mfloat-abi=soft to build vfp
Dave Martin
- [PATCH] arm: proc-v7: pc phy addresses before disable MMU
Dave Martin
- [PATCH 00/16] ARM: amba: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 01/16] ARM: amba: Move definition of struct amba_id to mod_devicetable.h
Dave Martin
- [PATCH 02/16] ARM: amba: Auto-generate AMBA driver module aliases during modpost
Dave Martin
- [PATCH 03/16] hwrng: nomadik: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 04/16] dmaengine: pl08x: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 05/16] dmaengine: pl330: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 06/16] gpio: pl061: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 07/16] input: ambakmi: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 08/16] mmc: mmci: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 09/16] rtc: pl030: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 10/16] rtc: pl031: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 11/16] spi: pl022: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 12/16] serial: pl010: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 13/16] serial: pl011: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 14/16] fbdev: amba: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 15/16] watchdog: sp805: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 16/16] sound: aaci: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 00/16] ARM: amba: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 00/16] ARM: amba: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 0/2] ARM: amba: Enable module alias autogeneration for AMBA drivers
Dave Martin
- [PATCH 1/2] ARM: amba: Move definition of struct amba_id to mod_devicetable.h
Dave Martin
- [PATCH 2/2] ARM: amba: Auto-generate AMBA driver module aliases during modpost
Dave Martin
- [PATCH] Shrink thread_info a bit
Dave Martin
- [PATCH 2/3] define ARM-specific dma_coherent_write_sync
Jon Masters
- [PATCH 2/3] define ARM-specific dma_coherent_write_sync
Jon Masters
- [PATCH] ARM: pl330: Fix a race condition
Javi Merino
- [PATCH v2] ARM: pl330: Fix a race condition
Javi Merino
- [PATCH] mach-ixp4xx: made gpio functions atomic
Frans Meulenbroeks
- [PATCH 16/26] ARM: pxa: CPU_PJ4 requires IWMMXT
Eric Miao
- [PATCH 01/26] usb/gadget/pxa25x: is_vbus_present is gone
Eric Miao
- [PATCH 05/26] ARM: pxa: make zylonite_pxa*_init declaration match code
Eric Miao
- [PATCH 04/26] net/pxa168_eth: add missing include of interrupt.h
Eric Miao
- [PATCH 06/26] ARM: pxa: add missing header inclusions
Eric Miao
- [PATCH 07/26] ARM: pxa: mbxfb: disable broken debugfs code
Eric Miao
- [PATCH 08/26] ARM: pxa: move z2 to generic cpu_suspend
Eric Miao
- [PATCH 09/26] ARM: pxa: export symbols from pxa3xx-ulpi
Eric Miao
- [PATCH 10/26] ARM: pxa: allow selecting just one of TREO680/CENTRO
Eric Miao
- [PATCH 11/26] ARM: pxa: allow building palm27x without pxafb
Eric Miao
- [PATCH 12/26] ARM: pxa: pxa95x/saarb depends on pxa3xx code
Eric Miao
- [PATCH 13/26] ARM: pxa: use correct __iomem annotations
Eric Miao
- [PATCH 14/26] mtd: nand_h1900 never worked
Eric Miao
- [PATCH 15/26] irda/ficp: only works on some pxa models
Eric Miao
- [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa
Eric Miao
- [PATCH 18/26] ARM: pxa: MTD_XIP is not actually working any more
Eric Miao
- [PATCH 19/26] ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ
Eric Miao
- [PATCH 20/26] ARM: pxa: select FB_PXA on saar and tevorevb
Eric Miao
- [PATCH 21/26] ARM: pxa: select POWER_SUPPLY on raumfeld
Eric Miao
- [PATCH 22/26] ARM: pxa: only select SMC91x on xcep when networking is enabled
Eric Miao
- Question about "Inconsistent kallsyms data"
Eric Miao
- [PATCH 24/26] ARM: pxa: centro and treo680 need palm27x
Eric Miao
- [PATCH 26/26] ARM: pxa: sharpsl pm needs SPI
Eric Miao
- [PATCH 06/26] ARM: pxa: add missing header inclusions
Eric Miao
- [PATCH 08/26] ARM: pxa: move z2 to generic cpu_suspend
Eric Miao
- [PATCH 13/26] ARM: pxa: use correct __iomem annotations
Eric Miao
- [PATCH 08/26] ARM: pxa: move z2 to generic cpu_suspend
Eric Miao
- [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa
Eric Miao
- [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa
Eric Miao
- [PATCH v4 8/8] ARM: pxa: move macros into gpio-pxa.c
Eric Miao
- [PATCH v4 3/8] ARM: pxa: rename gpio_to_irq and irq_to_gpio
Eric Miao
- [PATCH v4 8/8] ARM: pxa: move macros into gpio-pxa.c
Eric Miao
- [GIT PULL] pxa: fixes for next
Eric Miao
- [GIT PULL] pxa: feature patches for next
Eric Miao
- [PATCH] ARM: pxa/cm-x300: properly set bt_reset pin
Eric Miao
- [GIT PULL] pxa: fixes for next
Eric Miao
- [RFC PATCH 01/17] et1011c: Replaced PHY driver by a small dm646x board fixup
Kyle Moffett
- Build error while adding debug LL support for new board
Afzal Mohammed
- DEBUG LL: Build error while adding support for new board
Afzal Mohammed
- [PATCH v7 21/21] OMAP2+: UART: Do not gate uart clocks if used for debug_prints
Mohammed, Afzal
- [PATCH v7 21/21] OMAP2+: UART: Do not gate uart clocks if used for debug_prints
Mohammed, Afzal
- [PATCH v7 21/21] OMAP2+: UART: Do not gate uart clocks if used for debug_prints
Mohammed, Afzal
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
Mohammed, Afzal
- [PATCH v7 21/21] OMAP2+: UART: Do not gate uart clocks if used for debug_prints
Mohammed, Afzal
- Build error while adding debug LL support for new board
Mohammed, Afzal
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
Mohammed, Afzal
- Build error while adding debug LL support for new board
Mohammed, Afzal
- [PATCH] virtio: Add platform bus driver for memory mapped virtio device
Pawel Moll
- [PATCH] virtio: Add platform bus driver for memory mapped virtio device
Pawel Moll
- [PATCH 02/16] ARM: amba: Auto-generate AMBA driver module aliases during modpost
Pawel Moll
- [PATCH v2] virtio: Add platform bus driver for memory mapped virtio device
Pawel Moll
- [PATCH] arm: Add VIRTUALIZATION configuration menu and virtio options
Pawel Moll
- [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device
Pawel Moll
- [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device
Pawel Moll
- [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device
Pawel Moll
- [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device
Pawel Moll
- [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device
Pawel Moll
- [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device
Pawel Moll
- [PATCH v4] virtio: Add platform bus driver for memory mapped virtio device
Pawel Moll
- [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device
Pawel Moll
- [PATCH/RFC] mm: add vm_area_add_early()
Andrew Morton
- [PATCHv16 0/9] Contiguous Memory Allocator
Andrew Morton
- [RFC PATCH v3] drivercore: Add driver probe deferral mechanism
Andrew Morton
- [PATCH v3.1-rc9] ARM: populate processor tag in proc-cpuinfo for Uni-processor.
Andrew Morton
- [PATCH v3.1-rc9] ARM: populate processor tag in proc-cpuinfo for Uni-processor.
Andrew Morton
- [PATCHv16 0/9] Contiguous Memory Allocator
Andrew Morton
- [PATCH 1/9] mm: move some functions from memory_hotplug.c to page_isolation.c
Andrew Morton
- [PATCH 2/9] mm: alloc_contig_freed_pages() added
Andrew Morton
- [PATCH 3/9] mm: alloc_contig_range() added
Andrew Morton
- [PATCH 4/9] mm: MIGRATE_CMA migration type added
Andrew Morton
- [PATCH 6/9] drivers: add Contiguous Memory Allocator
Andrew Morton
- [PATCH 7/7] ARM: integrate CMA with DMA-mapping subsystem
Andrew Morton
- [PATCH 2/9] mm: alloc_contig_freed_pages() added
Andrew Morton
- [PATCH 2/9] mm: alloc_contig_freed_pages() added
Andrew Morton
- [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210
Sylwester Nawrocki
- [PATCH 1/4] ARM: EXYNOS4: Support for generic I/O power domains on EXYNOS4210
Sylwester Nawrocki
- [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro
Sylwester Nawrocki
- [PATCH] ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board
Sylwester Nawrocki
- [PATCH v3 RE-SEND 2/2] iommu/exynos: Add iommu driver for Exynos Platforms
Sylwester Nawrocki
- [PATCH v2] ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board
Sylwester Nawrocki
- [PATCH V4 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
Sylwester Nawrocki
- [PATCH v2] ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board
Sylwester Nawrocki
- [PATCH] ARM: Samsung: Move fimc plat. device from board files to plat-samsung
Sylwester Nawrocki
- [PATCH v3] ARM: EXYNOS4: Add support for M-5MOLS camera on Nuri board
Sylwester Nawrocki
- [PATCH V4 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
Sylwester Nawrocki
- [PATCH V4 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
Sylwester Nawrocki
- [PATCH V4 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
Sylwester Nawrocki
- [PATCH 1/3] ARM: EXYNOS: Add ASV feature for Exynos4 series
Sylwester Nawrocki
- [PATCH 3/3] ARM: EXYNOS: Support ASV for Exynos4210
Sylwester Nawrocki
- [PATCH v6 01/16] OMAP2+: hwmod: Add API to enable IO ring wakeup.
Rajendra Nayak
- [PATCH v6 02/16] OMAP2+: hwmod: Add API to check IO PAD wakeup status
Rajendra Nayak
- [PATCH v6 02/16] OMAP2+: hwmod: Add API to check IO PAD wakeup status
Rajendra Nayak
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH 2/9] regulator: helper routine to extract regulator_init_data
Nayak, Rajendra
- [PATCH v6 01/16] OMAP2+: hwmod: Add API to enable IO ring wakeup.
Rajendra Nayak
- [PATCH v2 0/5] Device tree support for regulators
Rajendra Nayak
- [PATCH v2 1/5] regulator: twl: Remove hardcoded board constraints from driver
Rajendra Nayak
- [PATCH v2 2/5] dt: add empty dt helpers for non-dt build
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 4/5] regulator: adapt fixed regulator driver to dt
Rajendra Nayak
- [PATCH v2 5/5] regulator: map consumer regulator based on device tree
Rajendra Nayak
- [PATCH v2 1/5] regulator: twl: Remove hardcoded board constraints from driver
Rajendra Nayak
- [PATCH v2 5/5] regulator: map consumer regulator based on device tree
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 5/5] regulator: map consumer regulator based on device tree
Nayak, Rajendra
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v2 3/5] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v3 0/4] Device tree support for regulators
Rajendra Nayak
- [PATCH v3 1/4] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v3 2/4] regulator: adapt fixed regulator driver to dt
Rajendra Nayak
- [PATCH v3 3/4] regulator: pass additional of_node to regulator_register()
Rajendra Nayak
- [PATCH v3 4/4] regulator: map consumer regulator based on device tree
Rajendra Nayak
- [PATCH 0/3] Device tree support for TWL regulators
Rajendra Nayak
- [PATCH 1/3] regulator: twl: adapt twl-regulator driver to dt
Rajendra Nayak
- [PATCH 2/3] omap4: sdp: Pass regulator data from dt
Rajendra Nayak
- [PATCH 3/3] omap4: panda: Pass regulator data from DT
Rajendra Nayak
- [PATCH v3 1/4] regulator: helper routine to extract regulator_init_data
Nayak, Rajendra
- [PATCH v4 1/4] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH v3 1/4] regulator: helper routine to extract regulator_init_data
Rajendra Nayak
- [PATCH 2/9] mm: alloc_contig_freed_pages() added
Michal Nazarewicz
- [PATCH 2/9] mm: alloc_contig_freed_pages() added
Michal Nazarewicz
- [PATCH 2/9] mm: alloc_contig_freed_pages() added
Michal Nazarewicz
- [PATCH 2/9] mm: alloc_contig_freed_pages() added
Michal Nazarewicz
- [PATCH 2/9] mm: alloc_contig_freed_pages() added
Michal Nazarewicz
- [PATCH 2/9] mm: alloc_contig_freed_pages() added
Michal Nazarewicz
- [PATCH 4/9] mm: MIGRATE_CMA migration type added
Michal Nazarewicz
- [PATCH 6/9] drivers: add Contiguous Memory Allocator
Michal Nazarewicz
- [PATCH 4/9] mm: MIGRATE_CMA migration type added
Michal Nazarewicz
- [PATCH 21/30] sound/soc/omap: limit to omap2plus
Jarkko Nikula
- [PATCH 21/30] sound/soc/omap: limit to omap2plus
Jarkko Nikula
- [PATCH arm-soc.git/for-next] ARM: l2x0: Fix merge typo with "ARM: l2x0: add empty l2x0_of_init"
Jarkko Nikula
- [PATCH] DaVinci: only poll EPCPR on DM644x and DM355
Nori, Sekhar
- [PATCH] DaVinci: only poll EPCPR on DM644x and DM355
Nori, Sekhar
- [PATCH 0/1] arm: omap: remove obsolete IRQF_DISABLED
Michael Opdenacker
- [PATCH 1/1] arm: omap: removed obsolete IRQF_DISABLED
Michael Opdenacker
- [PATCH v2 0/4] Fixes to twl4030-madc and add BeagleBoard support
Samuel Ortiz
- [PATCH 22/30] mfd: build twl6030 only on omap2
Samuel Ortiz
- [PATCH 18/30] omap-usb: automatically select MFD_OMAP_USB_HOST
Samuel Ortiz
- [PATCH] AT91: Add external RTC for Flexibity board
Maxim Osipov
- [PATCH 0/4] ARM: at91 rename at91 ref boards defconfig as soc defconfig
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/4] ARM: at91: rename at91sam9260ek_defconfig to at91sam9260_defconfig
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 2/4] ARM: at91: rename at91sam9g20ek_defconfig to at91sam9g20_defconfig
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 3/4] ARM: at91: rename at91cap9adk_defconfig to at91cap9_defconfig
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 4/4] ARM: at91: rename at91sam9rlek_defconfig to at91sam9rl_defconfig
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH] at91/yl-9200: Fix section mismatch
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 0/11 v3] ARM: AT91: update gpio implementation
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 01/11] ARM: at91/gpio: make gpio register base soc independant
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 02/11] ARM: at91/boards: use -EINVAL for invalid gpio
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 03/11] ARM: at91/soc: use gpio_is_valid to check the gpio
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 04/11] ARM: at91/pata: use gpio_is_valid to check the gpio
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 05/11] ARM: at91/ide: use gpio_is_valid to check the gpio
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 06/11] ARM: at91/mmc: use gpio_is_valid to check the gpio
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 07/11] ARM: at92/nand: use gpio_is_valid to check the gpio
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 08/11] ARM: at92/udc: use gpio_is_valid to check the gpio
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 09/11] ARM: at92/ohci: use gpio_is_valid to check the gpio
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 10/11] ARM: at91/gpio: drop PIN_BASE
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 11/11] ARM: at91/gpio: fix display of number of irq setuped
Jean-Christophe PLAGNIOL-VILLARD
- [AT91 PULL for 3.2] boards merge + gpio rework
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 0/8] ARM: at91: make dma/ecc/pit/smc/rtt register base soc independant
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/8] ARM: at91/nand: make ecc register base soc independant
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 2/8] ARM: at91/dma: make dma register base soc independant
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 3/8] ARM: at91/rtt: make rtt register base soc independant
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 4/8] ARM: rtc/at91sam9: use ioremap and iounmap
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 2/9] ARM: SPMP8000: Add machine base files
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 5/8] ARM: at91: add map_register entry point to soc setup
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 6/8] ARM: at91/pit: make register base soc independant
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 7/8] ARM: at91: make smc register base soc independant
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 8/8] ARM: at91: usart: drop static map regs for dbgu
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/2] ARM: at91: define CLOCK_TICK_RATE to bogus value except A91X40
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 2/2] ARM: at91: drop specific Kconfig for at91sam9g20/g10
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/4] ARM: at91: add at91sam9g20 dtsi
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 2/4] ARM: at91: add Calao USB A9G20 DT support
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 3/4] ARM: at91/smc: add DT support
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 4/4] ARM: at91/pit: add DT support
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH] AT91: Add external RTC for Flexibity board
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 04/11] ARM: at91/pata: use gpio_is_valid to check the gpio
Jean-Christophe PLAGNIOL-VILLARD
- [RFC][PATCH] uncompress.h cleanup and DT support
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.
Jean-Christophe PLAGNIOL-VILLARD
- [RFC] ARM: at91: gpio add mux check
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/1] pinctrl/sirf: fix sirfsoc_get_group_pins prototype introduce in 7e570f97
Jean-Christophe PLAGNIOL-VILLARD
- [RFC] ARM: at91: gpio add mux check
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 1/7] amp/remoteproc: add framework for controlling remote processors
Jean-Christophe PLAGNIOL-VILLARD
- [RFC] DT boot loader best practice
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Jean-Christophe PLAGNIOL-VILLARD
- [PATCH] usb: ehci: make HC see up-to-date qh/qtd descriptor ASAP
Pandita, Vikram
- [PATCH 1/2] drivers: create a pin control subsystem v9
Chanho Park
- [PATCH 1/2] drivers: create a pin control subsystem v9
Chanho Park
- [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro
Kyungmin Park
- [PATCH] ARM: EXYNOS: Add ARCH_EXYNOS and reorganize arch/arm/mach-exynos
Kyungmin Park
- [PATCH 1/3] mmc: sdhci-s3c: Remove usage of clk_type member in platform data
Kyungmin Park
- [PATCH v4 02/10] ARM: SoC: Add per SoC SMP and CPU hotplug operations
Kyungmin Park
- [PATCH v4 02/10] ARM: SoC: Add per SoC SMP and CPU hotplug operations
Kyungmin Park
- [PATCH v4 06/10] ARM: SoC: convert Exynos4 to SoC descriptor
Kyungmin Park
- [PATCH V2 2/2] ARM: SAMSUNG: Cleanup resources by using macro
Kyungmin Park
- [GIT PULL] Samsung board-2 for v3.2
Kyungmin Park
- [ANNOUNCE] [OFFTOPIC] Xvisor: eXtensible Versatile hypervISOR
Anup Patel
- [Linaro-mm-sig] [PATCH 8/9] ARM: integrate CMA with DMA-mapping subsystem
Subash Patel
- [PATCH 1/3] Add support for mini-box.com picoSAM9G45 board
Nicu Pavel
- [PATCH 2/3] Add kernel configuration option for picosam9g45 board
Nicu Pavel
- [PATCH 3/3] Add picosam9g45 board to Makefile
Nicu Pavel
- [PATCH 1/3] Add support for mini-box.com picoSAM9G45 board
Nicu Pavel
- [PATCH 2/3] Add kernel configuration option for picosam9g45 board
Nicu Pavel
- [PATCH 3/3] Add picosam9g45 board to Makefile
Nicu Pavel
- [PATCH v2 1/3] Add support for mini-box.com picoSAM9G45 board
Nicu Pavel
- [PATCH v2 2/3] Add kernel configuration option for picosam9g45 board
Nicu Pavel
- [PATCH v2 3/3] Add picosam9g45 board to Makefile
Nicu Pavel
- [PATCH v3 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM
Pedanekar, Hemant
- [PATCH v3 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM
Pedanekar, Hemant
- [RFC PATCH v2 0/6] TI81XX: Add clock and hwmod data
Pedanekar, Hemant
- [PATCH v3 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM
Pedanekar, Hemant
- [PATCH v3 2/3] ARM: OMAP: TI814X: Add cpu type macros and detection support
Pedanekar, Hemant
- [PATCH v4 0/3] Add support for TI814X processor series
Hemant Pedanekar
- [PATCH v4 1/3] ARM: OMAP: TI81XX: Prepare for addition of TI814X support
Hemant Pedanekar
- [PATCH v4 2/3] ARM: OMAP: TI814X: Add cpu type macros and detection support
Hemant Pedanekar
- [PATCH v4 3/3] ARM: OMAP: TI814X: Create board support and enable build for TI8148 EVM
Hemant Pedanekar
- [PATCH] omap: dmtimer: convert printk to pr_*
Joe Perches
- [PATCH v3] omap: dmtimer: convert printk to pr_err
Joe Perches
- [PATCH v3] omap: dmtimer: convert printk to pr_err
Joe Perches
- [PATCH v3] omap: dmtimer: convert printk to pr_err
Joe Perches
- [PATCH 0/3] ARM 4Kstacks: introduction
Joe Perches
- [PATCH 0/3] ARM 4Kstacks: introduction
Joe Perches
- [PATCH] arm/tegra: clk_get should not be fatal
Joe Perches
- [PATCH] arm/tegra: clk_get should not be fatal
Joe Perches
- [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.
Thomas Petazzoni
- [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board
Thomas Petazzoni
- [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.
Thomas Petazzoni
- [PATCH] PM: HIBERNATION: add resume_delay kernel param as well as resume_delay
Borislav Petkov
- [PATCH] PM: HIBERNATION: add resume_delay kernel param as well as resume_delay
Borislav Petkov
- [PATCH 0/3] ARM 4Kstacks: introduction
Bernd Petrovitsch
- [PATCH] fix ehci alignment error
Mikael Pettersson
- [PATCH v4] ARM: cache-l2x0: add resume entry for l2 in secure mode
Lorenzo Pieralisi
- [PATCH v6 10/16] OMAP2+: UART: Modify omap_uart_can_sleep function
Jean Pihet
- Please help with the OMAP static mapping mess
Nicolas Pitre
- [PATCH v4 02/10] ARM: SoC: Add per SoC SMP and CPU hotplug operations
Nicolas Pitre
- Please help with the OMAP static mapping mess
Nicolas Pitre
- Please help with the OMAP static mapping mess
Nicolas Pitre
- Git pull request: mach/vmalloc.h removal, and ioremap optimizations
Nicolas Pitre
- Pull request: removal of most instances of mach/memory.h
Nicolas Pitre
- Please help with the OMAP static mapping mess
Nicolas Pitre
- Please help with the OMAP static mapping mess
Nicolas Pitre
- Please help with the OMAP static mapping mess
Nicolas Pitre
- Please help with the OMAP static mapping mess
Nicolas Pitre
- [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
Nicolas Pitre
- [PATCH 4/4] ARM: OMAP: Map SRAM later on with ioremap_exec()
Nicolas Pitre
- [PATCH 5/4] ARM: OMAP: Move set_globals initialization to happen in init_early
Nicolas Pitre
- Please help with the OMAP static mapping mess
Nicolas Pitre
- [PATCH 4/4] ARM: OMAP: Map SRAM later on with ioremap_exec()
Nicolas Pitre
- [PATCH/RFC] mm: add vm_area_add_early()
Nicolas Pitre
- [PATCH 0/2] OMAP: Update nr_irqs field in machine descriptors
Nicolas Pitre
- [PATCH 0/4] initialize omap SRAM later on with __arm_ioremap_exec()
Nicolas Pitre
- [PATCH 7/7] ARM: OMAP: Warn if omap_ioremap is called before SoC detection
Nicolas Pitre
- [PATCH 0/2] OMAP: Update nr_irqs field in machine descriptors
Nicolas Pitre
- [PATCH 5/4] ARM: OMAP: Move set_globals initialization to happen in init_early
Nicolas Pitre
- [PATCH 18/26] ARM: pxa: MTD_XIP is not actually working any more
Nicolas Pitre
- [GIT PULL] DEBUG_LL platform updates for 3.2
Nicolas Pitre
- [PATCH] ARM: zImage: Use $(CROSS_COMPILE)size to get .bss size
Nicolas Pitre
- Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011
Nicolas Pitre
- Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011
Nicolas Pitre
- [GIT PULL] DEBUG_LL platform updates for 3.2
Nicolas Pitre
- [GIT PULL] DEBUG_LL platform updates for 3.2
Nicolas Pitre
- [GIT PULL] DEBUG_LL platform updates for 3.2
Nicolas Pitre
- [GIT PULL] DEBUG_LL platform updates for 3.2
Nicolas Pitre
- [PATCH 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions
Nicolas Pitre
- [PATCHv2] ARM: zImage: Use $(CROSS_COMPILE)size to get .bss size
Nicolas Pitre
- [GIT PULL] DEBUG_LL platform updates for 3.2
Nicolas Pitre
- [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>
Nicolas Pitre
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Nicolas Pitre
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Nicolas Pitre
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Nicolas Pitre
- [PATCH] ARM: mutually exclude ZBOOT_ROM and AUTO_ZRELADDR
Nicolas Pitre
- [PATCH] ARM: mutually exclude ZBOOT_ROM and AUTO_ZRELADDR
Nicolas Pitre
- [PATCH] ARM: mm/alignment.c: Fix build error
Nicolas Pitre
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Nicolas Pitre
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Nicolas Pitre
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Nicolas Pitre
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Nicolas Pitre
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Nicolas Pitre
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Nicolas Pitre
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Nicolas Pitre
- Pull request: removal of most instances of mach/memory.h
Nicolas Pitre
- [RFC/PATCH v4 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe
Nicolas Pitre
- [RFC/PATCH v4 7/7] ARM: ARM11 MPCore: cpu_v6_set_pte_ext is not preempt safe
Nicolas Pitre
- [RFC/PATCH v4 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe
Nicolas Pitre
- [PATCHv2 2/2] msm: Support DEBUG_LL on MSM8660 and MSM8960
Nicolas Pitre
- [PATCH/RFT 0/12] step towards removal of mach/system.h
Nicolas Pitre
- [PATCH 01/12] ARM: clean up idle handlers
Nicolas Pitre
- [PATCH 02/12] ARM: mach-at91: move special idle code to a out-of-line pm_idle hook
Nicolas Pitre
- [PATCH 03/12] ARM: mach-clps711x: move special idle code to a out-of-line pm_idle hook
Nicolas Pitre
- [PATCH 04/12] ARM: mach-ebsa110: move special idle code to a out-of-line pm_idle hook
Nicolas Pitre
- [PATCH 05/12] ARM: mach-gemini: move special idle code to a out-of-line pm_idle hook
Nicolas Pitre
- [PATCH 06/12] ARM: mach-h720x: move special idle code to a out-of-line pm_idle hook
Nicolas Pitre
- [PATCH 07/12] ARM: mach-ixp23xx: properly disable CPU idle call
Nicolas Pitre
- [PATCH 08/12] ARM: mach-ixp4xx: properly disable CPU idle call
Nicolas Pitre
- [PATCH 09/12] ARM: s3c24xx: move special idle code to a proper out-of-line pm_idle hooks
Nicolas Pitre
- [PATCH 10/12] ARM: mach-shark: properly disable CPU idle call
Nicolas Pitre
- [PATCH 11/12] ARM: mach-w90x900: properly disable CPU idle call
Nicolas Pitre
- [PATCH 12/12] ARM: imx: move special idle code to proper out-of-line pm_idle hooks
Nicolas Pitre
- [PATCH] ARM: remove NR_IRQS dependency for ARM-specific HARDIRQ_BITS definition
Nicolas Pitre
- [RFC] Shrink sched_clock some more
Nicolas Pitre
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Nicolas Pitre
- [PATCH] arm: omap: Fix errors and warnings when building for one board
Sanjeev Premi
- [PATCH] arm: omap: Fix errors and warnings when building for one board
Premi, Sanjeev
- [PATCH v2] arm: omap: Fix errors and warnings when building for one board
Sanjeev Premi
- [PATCH v2] arm: omap: Fix errors and warnings when building for one board
Premi, Sanjeev
- Suspicious header
Ruskó Péter
- [PATCH 05/11] ARM: vfp: use -mfloat-abi=soft to build vfp
Khem Raj
- [PATCH] mmc: mmci: Improve runtime PM support
Sebastian Rasmussen
- [PATCH] mmc: mmci: Improve runtime PM support
Sebastian Rasmussen
- [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping
Krishna Reddy
- [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping
Krishna Reddy
- [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping
Krishna Reddy
- [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping
Krishna Reddy
- [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping
Krishna Reddy
- change_page_attr() implementation for ARM?
Krishna Reddy
- [PATCH] arm/tegra: Add device-tree support for TrimSlice board
Thierry Reding
- [PATCH] AT91: Add a driver for the ADC
Maxime Ripard
- [PATCH 1/3] ARM: AT91: Add platform data for the ADCs
Maxime Ripard
- [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.
Maxime Ripard
- [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board
Maxime Ripard
- [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.
Maxime Ripard
- [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board
Maxime Ripard
- [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.
Maxime Ripard
- [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.
Maxime Ripard
- [PATCH v2 5/5] iommu/exynos: Use bus_set_iommu instead of register_iommu
Joerg Roedel
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Roedel, Joerg
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Roedel, Joerg
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Roedel, Joerg
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Roedel, Joerg
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Roedel, Joerg
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Roedel, Joerg
- [PATCH v5 2/2] iommu/exynos: Add iommu driver for Exynos Platforms
Roedel, Joerg
- [PATCH v3 1/6] iommu/core: split mapping to page sizes as supported by the hardware
Roedel, Joerg
- Please update linux-next url for tegra
Stephen Rothwell
- [PATCH] fix ehci alignment error
Måns Rullgård
- [PATCH] fix ehci alignment error
Måns Rullgård
- [PATCH 0/3] ARM 4Kstacks: introduction
Måns Rullgård
- [PATCH 0/3] ARM 4Kstacks: introduction
Måns Rullgård
- [PATCH 0/3] ARM 4Kstacks: introduction
Måns Rullgård
- TX28 drivers - Please help
Peter Rusko
- [PATCH] virtio: Add platform bus driver for memory mapped virtio device
Rusty Russell
- [PATCH] virtio: Add platform bus driver for memory mapped virtio device
Rusty Russell
- [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device
Rusty Russell
- [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device
Rusty Russell
- [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device
Rusty Russell
- [PATCH v4] virtio: Add platform bus driver for memory mapped virtio device
Rusty Russell
- [PATCH 0/7] Introducing a generic AMP framework
Rusty Russell
- [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device
Rusty Russell
- [PATCH v3] virtio: Add platform bus driver for memory mapped virtio device
Rusty Russell
- [PATCH] arm: mm: Fix infinite looping issue
Girish K S
- [PATCH] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection
Steve Sakoman
- [PATCH v2] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection
Steve Sakoman
- [PATCH 0/2] MMC: disable multiblock reads on controllers that don't support them
Steve Sakoman
- [PATCH 1/7] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
Andres Salomon
- nr_cpus cmdline parameter not working
Mark Salter
- [PATCH] arm: fix handling of nr_cpus
Mark Salter
- [PATCH] arm: fix handling of nr_cpus
Mark Salter
- [PATCH] arm: fix handling of nr_cpus
Mark Salter
- [PATCH] arm: fix handling of nr_cpus
Mark Salter
- [PATCH 1/2] [ARM] mach-types: Re-add apf9328
Wolfram Sang
- [PATCH 2/2] [ARM] MX1:apf9328: Add i2c support
Wolfram Sang
- [PATCH] arm: mx3: update defconfig
Wolfram Sang
- [PATCH] arm: mx23: add machine_is_stmp_378x()
Wolfram Sang
- [RFC 0/4] simplify remapping a resource for drivers
Wolfram Sang
- [RFC 3/4] lib: devres: add convenience function to remap a resource
Wolfram Sang
- [PATCH] lib: devres: add convenience function to remap a resource
Wolfram Sang
- [PATCH 00/51] Remove inline arch_reset definitions from system.h
Deepak Saxena
- [PATCH 00/51] Remove inline arch_reset definitions from system.h
Deepak Saxena
- [PATCH 49/55] video: irq: Remove IRQF_DISABLED
Florian Tobias Schandinat
- [PATCH 02/14] ARM : SAMSUNG : Add RS485 support.
Paul Schilling
- [PATCH 05/14] ARM : SAMSUNG : Add GPIO_EXTRA for S3C2416.
Paul Schilling
- [PATCH 06/14] ARM : SAMSUNG : S3C2416 Added io mapping for Static memory controller.
Paul Schilling
- [PATCH 06/14] ARM : SAMSUNG : S3C2416 Added io mapping for Static memory controller.
Paul Schilling
- [PATCH 02/14] ARM : SAMSUNG : Add RS485 support.
Paul Schilling
- [PATCH] ATMEL USB: pass unknown FEATURE SET requests to gadget
Sven Schnelle
- [PATCH v6 0/3] Add support for tegra2 based ventana board
Peter De Schrijver
- [[PATCH v6] 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards
Peter De Schrijver
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Peter De Schrijver
- [[PATCH v6] 2/3] arm/tegra: add support for ventana pinmuxing
Peter De Schrijver
- [[PATCH v6] 3/3] arm/tegra: device tree support for ventana board
Peter De Schrijver
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Peter De Schrijver
- [PATCH v6 0/3] Add support for tegra2 based ventana board
Peter De Schrijver
- [PATCH v7 0/3] Add support for tegra2 based ventana board
Peter De Schrijver
- [[PATCH v7] 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards
Peter De Schrijver
- [PATCH v7 0/3] Add support for tegra2 based ventana board
Peter De Schrijver
- [PATCH v7 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards
Peter De Schrijver
- [PATCH v7 2/3] arm/tegra: add support for ventana pinmuxing
Peter De Schrijver
- [PATCH v7 3/3] arm/tegra: device tree support for ventana board
Peter De Schrijver
- [PATCH v7 0/3] Add support for tegra2 based ventana board
Peter De Schrijver
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Peter De Schrijver
- [PATCH v7 3/3] arm/tegra: device tree support for ventana board
Peter De Schrijver
- [PATCH v8 0/3] Add support for tegra2 based ventana board
Peter De Schrijver
- [PATCH v8 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards
Peter De Schrijver
- [PATCH v8 2/3] arm/tegra: add support for ventana pinmuxing
Peter De Schrijver
- [PATCH v8 3/3] arm/tegra: device tree support for ventana board
Peter De Schrijver
- [PATCH v9 0/3] Add support for tegra2 based ventana board
Peter De Schrijver
- [PATCH] arm/tegra: clk_get should not be fatal
Peter De Schrijver
- [PATCH 2/6] arm/tegra: prepare pinmux code for multiple tegra variants
Peter De Schrijver
- [PATCH 2/6] arm/tegra: prepare pinmux code for multiple tegra variants
Peter De Schrijver
- TX28 drivers - Please help
Robert Schwebel
- cpufreq for at91? device tree files
Robert Schwebel
- [RFC 0/2] Introduce dma buffer sharing mechanism
Sumit Semwal
- [RFC 2/2] dma-buf: Documentation for buffer sharing framework
Semwal, Sumit
- [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism
Sumit Semwal
- [PATCH 04/30] ARM: omap: add missing __devexit_p() annotations
Santosh Shilimkar
- [PATCH 00/30] ARM/omap: omap specific randconfig fixes
Santosh Shilimkar
- [PATCH 06/30] ARM: omap: fix build with CONFIG_I2C_OMAP disabled
Santosh Shilimkar
- [PATCH 05/30] ARM: omap: enable building omap2 without omap2420/2430
Santosh Shilimkar
- [PATCH 07/30] ARM: omap: fix visibility of omap2_mbox_iva_priv
Santosh Shilimkar
- [PATCH 13/30] ARM: omap2+: fix omap_hdq_init compilation
Santosh Shilimkar
- [PATCH 14/30] ARM: omap2: irq.c is always needed
Santosh Shilimkar
- [PATCH 23/30] ARM: omap2: select twl4030 support on boards that need it
Santosh Shilimkar
- [PATCH 24/30] ARM: omap2+: ensure that one of omap2/3/4 is selected
Santosh Shilimkar
- [PATCH 25/30] ARM: OMAP depends on MMU
Santosh Shilimkar
- [PATCH 26/30] ARM: omap: add board autoselection
Santosh Shilimkar
- [PATCH 27/30] ARM: omap: select L2X0 cache on omap4
Santosh Shilimkar
- [PATCH 30/30] ARM: omap2: select ARM_AMBA for OMAP3_EMU
Santosh Shilimkar
- [PATCH 28/30] ARM: omap: select CPU_FREQ_TABLE where needed
Santosh Shilimkar
- [PATCH 26/30] ARM: omap: add board autoselection
Santosh Shilimkar
- [PATCH 28/30] ARM: omap: select CPU_FREQ_TABLE where needed
Santosh Shilimkar
- [PATCH 00/30] ARM/omap: omap specific randconfig fixes
Santosh Shilimkar
- Please help with the OMAP static mapping mess
Shilimkar, Santosh
- [PATCH v4 04/10] ARM: SoC: convert OMAP4 to SoC descriptor
Shilimkar, Santosh
- Please help with the OMAP static mapping mess
Santosh Shilimkar
- Please help with the OMAP static mapping mess
Santosh Shilimkar
- [PATCH 0/4] initialize omap SRAM later on with __arm_ioremap_exec()
Santosh Shilimkar
- [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support
Santosh Shilimkar
- [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
Santosh Shilimkar
- [PATCH 2/4] ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done
Santosh Shilimkar
- [PATCH 4/4] ARM: OMAP: Map SRAM later on with ioremap_exec()
Santosh Shilimkar
- [PATCH 5/4] ARM: OMAP: Move set_globals initialization to happen in init_early
Santosh Shilimkar
- [PATCH 0/4] initialize omap SRAM later on with __arm_ioremap_exec()
Santosh Shilimkar
- [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
Santosh Shilimkar
- [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
Santosh Shilimkar
- [PATCH 1/4] ARM: Add __arm_ioremap_exec for mapping external memory as MT_MEMORY
Santosh Shilimkar
- [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support
Santosh Shilimkar
- [PATCH 00/24 V2] OMAP4: PM: suspend, CPU-hotplug and CPUilde support
Santosh Shilimkar
- [PATCH] ARM: SAMSUNG: Add clk enable/disable of pwm
Joonyoung Shim
- [PATCH 0/3] ARM: SAMSUNG: Add support for sdhci clock lookup using generic names
Rajeshwari Shinde
- [PATCH 1/3] SDHCI: S3C: Use generic clock names for sdhci bus clock options
Rajeshwari Shinde
- [PATCH 2/3] ARM: SAMSUNG: Remove SDHCI bus clocks from platform data
Rajeshwari Shinde
- [PATCH 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
Rajeshwari Shinde
- [PATCH V2 0/2] Add a common macro for creating struct clk_lookup entries
Rajeshwari Shinde
- [PATCH V2 1/2] ARM: CLKDEV: Add Common Macro for clk_lookup
Rajeshwari Shinde
- [PATCH V2 2/2] ARM: Using CLKDEV_INIT for creating clk_lookup instance
Rajeshwari Shinde
- [PATCH V2 0/3] ARM: SAMSUNG: Add support for sdhci clock lookup using generic names
Rajeshwari Shinde
- [PATCH V2 1/3] SDHCI: S3C: Use generic clock names for sdhci bus clock options
Rajeshwari Shinde
- [PATCH V2 2/3] ARM: SAMSUNG: Remove SDHCI bus clocks from platform data
Rajeshwari Shinde
- [PATCH V3 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
Rajeshwari Shinde
- [PATCH V3 0/3] ARM: SAMSUNG: Add support for sdhci clock lookup using generic names
Rajeshwari Shinde
- [PATCH V3 1/3] SDHCI: S3C: Use generic clock names for sdhci bus clock options
Rajeshwari Shinde
- [PATCH V3 2/3] ARM: SAMSUNG: Remove SDHCI bus clocks from platform data
Rajeshwari Shinde
- [PATCH V4 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
Rajeshwari Shinde
- [PATCH V4 0/3] ARM: SAMSUNG: Add support for sdhci clock lookup using generic names
Rajeshwari Shinde
- [PATCH V4 1/3] SDHCI: S3C: Use generic clock names for sdhci bus clock options
Rajeshwari Shinde
- [PATCH V4 2/3] ARM: SAMSUNG: Remove SDHCI bus clocks from platform data
Rajeshwari Shinde
- [PATCH V5 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
Rajeshwari Shinde
- [PATCH V5 0/3] ARM: SAMSUNG: Add support for sdhci clock lookup using generic names
Rajeshwari Shinde
- [PATCH V5 1/3] SDHCI: S3C: Use generic clock names for sdhci bus clock options
Rajeshwari Shinde
- [PATCH V5 2/3] ARM: SAMSUNG: Remove SDHCI bus clocks from platform data
Rajeshwari Shinde
- [PATCH V6 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
Rajeshwari Shinde
- [PATCH V6] SDHCI: S3C: Use generic clock names for sdhci bus clock options
Rajeshwari Shinde
- [PATCH] ARM: tegra: fix compilation error due to mach/hardware.h removal
Sergei Shtylyov
- [PATCH V2 1/2] ARM: S3C2410: Add __init attribute to usb_simtec_init()
Sergei Shtylyov
- [PATCH v2 10/14] ARM: tegra: tegra_powergate_is_powered should be static
Sergei Shtylyov
- [PATCH V2 4/4] ARM: at91/dma: DMA controller registering with DT support
Sergei Shtylyov
- [RFT/PATCH 7/7] arm: omap: smartreflex: micro-optimization for sanity check
Sergei Shtylyov
- [RFT/PATCH 6/7] arm: omap: smartreflex: fix IRQ handling bug
Sergei Shtylyov
- [RFT/PATCH 7/7] arm: omap: smartreflex: micro-optimization for sanity check
Sergei Shtylyov
- [PATCH 04/11] ARM: at91/pata: use gpio_is_valid to check the gpio
Sergei Shtylyov
- [PATCH 04/11] ARM: at91/pata: use gpio_is_valid to check the gpio
Sergei Shtylyov
- [PATCH 04/11] ARM: at91/pata: use gpio_is_valid to check the gpio
Sergei Shtylyov
- [PATCH 3/4] ARM: OMAP3: cm-t35: fix audio
Sergei Shtylyov
- [patch 1/1] iMX: Fix module build
Sergei Shtylyov
- [PATCH] DaVinci: only poll EPCPR on DM644x and DM355
Sergei Shtylyov
- [PATCH] DaVinci: only poll EPCPR on DM644x and DM355
Sergei Shtylyov
- [PATCHv2] hw_random: add driver for atmel true hardware random number generator
Baruch Siach
- [PATCHv2] hw_random: add driver for atmel true hardware random number generator
Baruch Siach
- [RFC][PATCH] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired
Baruch Siach
- Realtek ALC530 codec driver
Baruch Siach
- [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit
Baruch Siach
- [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit
Baruch Siach
- [PATCH] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit
Baruch Siach
- [PATCH] Shrink thread_info a bit
Baruch Siach
- [PATCH V3 1/2] ARM: at91: dt: at91sam9g45 family and board device tree files
Baruch Siach
- [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers
Baruch Siach
- [PATCH v2] ARM: EXYNOS4: Configure MAX8997 PMIC for Origen
Inderpal Singh
- [PATCH] i2c-gpio.c: correct logic of pdata->scl_is_open_drain
Håvard Skinnemoen
- [PATCH v4] ARM: cache-l2x0: add resume entry for l2 in secure mode
Barry Song
- [PATCH] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file
Barry Song
- [PATCH] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file
Barry Song
- [GIT PULL] ARM: CSR: l2x0 init cleanup for 3.2
Barry Song
- [PATCH 2/2] pinmux: add a driver for the U300 pinmux
Barry Song
- [PATCH 2/2] pinmux: add a driver for the U300 pinmux
Barry Song
- [PATCH v2] pinmux: add a driver for the CSR SiRFprimaII pinmux
Barry Song
- [PATCH v2] pinmux: add a driver for the CSR SiRFprimaII pinmux
Barry Song
- [PATCH 1/3] ARM: imx: always select CACHE_L2X0 on i.MX3
Barry Song
- [PATCH v3] pinmux: add a driver for the CSR SiRFprimaII pinmux
Barry Song
- [PATCH] PM: HIBERNATION: add resume_delay kernel param as well as resume_delay
Barry Song
- [PATCH] PM: HIBERNATION: add resume_delay kernel param as well as resume_delay
Barry Song
- [PATCH 5/9] ARM: SPMP8000: Add pinmux driver
Barry Song
- [PATCH] ARM: CSR: PM: use outer_resume to resume L2 cache
Barry Song
- [PATCH 2/2] pinmux: add a driver for the U300 pinmux
Barry Song
- [PATCH v10] pinctrl: add a driver for the U300 pinmux
Barry Song
- [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers
Barry Song
- [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers
Barry Song
- [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers
Barry Song
- [PATCH v2] UART: add CSR SiRFprimaII SoC on-chip uart drivers
Barry Song
- [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver
Barry Song
- [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver
Barry Song
- [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver
Barry Song
- [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver
Barry Song
- [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver
Barry Song
- [PATCH v2] UART: add CSR SiRFprimaII SoC on-chip uart drivers
Barry Song
- [PATCH v2] UART: add CSR SiRFprimaII SoC on-chip uart drivers
Barry Song
- [PATCH v2] UART: add CSR SiRFprimaII SoC on-chip uart drivers
Barry Song
- Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011
Barry Song
- Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011
Barry Song
- [GIT PULL] i.MX6Q support
Barry Song
- [GIT PULL] ARM: CSR: l2x0 init cleanup for 3.2
Barry Song
- [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver
Barry Song
- [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver
Barry Song
- [PATCH v5] dmaengine: add CSR SiRFprimaII DMAC driver
Barry Song
- [PATCH v2] UART: add CSR SiRFprimaII SoC on-chip uart drivers
Barry Song
- [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers
Barry Song
- [PATCH] pinctrl: Fix "warning: 'struct pinctrl_dev' declared inside parameter list"
Barry Song
- [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver
Barry Song
- [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers
Barry Song
- [PATCH v4] dmaengine: add CSR SiRFprimaII DMAC driver
Barry Song
- [PATCH 33/51] ARM: mach-prima2: use arm_arch_reset instead of arch_reset
Barry Song
- [PATCH v6 01/16] OMAP2+: hwmod: Add API to enable IO ring wakeup.
Vishwanath Sripathy
- [PATCH 1/4] ARM: OMAP3 PM: Fix IO Daisychain sequence
Vishwanath Sripathy
- [PATCH 2/4] ARM: OMAP4 PM: Add IO Daisychain support
Vishwanath Sripathy
- [PATCH 1/4] ARM: OMAP3 PM: Fix IO Daisychain sequence
Vishwanath Sripathy
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Anton Staaf
- [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism
Tomasz Stanislawski
- [PATCH 1/2] atmel_lcdfb: Adjust HFP calculation so it matches the manual.
Alexander Stein
- [PATCH 2/2] atmel_lcdfb: Use proper blanking on negative contrast polarity
Alexander Stein
- [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board
Alexander Stein
- [PATCH 04/30] ARM: omap: add missing __devexit_p() annotations
Bjarne Steinsbo
- [PATCH] fix ehci alignment error
Alan Stern
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Alan Stern
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Alan Stern
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Alan Stern
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Alan Stern
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Alan Stern
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Alan Stern
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Alan Stern
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Alan Stern
- [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend
Alan Stern
- [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend
Alan Stern
- [PATCH] ramoops appears geared to not support ARM
Marco Stornelli
- [PATCH] ramoops appears geared to not support ARM
Marco Stornelli
- [PATCH] ramoops appears geared to not support ARM
Marco Stornelli
- [PATCH 2/7] s3c-adc: describe features via quirk constants
Heiko Stübner
- [PATCH v2] regulator: Add driver for gpio-controlled regulators
Heiko Stübner
- [PATCH 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
Heiko Stübner
- [PATCH 2/7] s3c-adc: describe features via quirk constants
Heiko Stübner
- [PATCH v3 0/5] S3C2443/S3C2416: Implement support for ADC
Heiko Stübner
- [PATCH 1/5] S3C2443/S3C2416: Add adc registers
Heiko Stübner
- [PATCH 2/5] s3c-adc: Fix mux bit modification in s3c_adc_select
Heiko Stübner
- [PATCH 3/5] S3C24XX: Allow overriding of adc device name
Heiko Stübner
- [PATCH 4/5] s3c-adc: Add support for S3C2443
Heiko Stübner
- [PATCH 5/5] s3c-adc: Add support for S3C2416/S3C2450
Heiko Stübner
- [PATCH V3 3/3] ARM: SAMSUNG: Add lookup of sdhci-s3c clocks using generic names
Heiko Stübner
- [PATCH 0/8] S3C2416: Enable armdiv and armclk
Heiko Stübner
- [PATCH 05/14] ARM : SAMSUNG : Add GPIO_EXTRA for S3C2416.
Heiko Stübner
- [PATCH 06/14] ARM : SAMSUNG : S3C2416 Added io mapping for Static memory controller.
Heiko Stübner
- [RFC][PATCH] Consolidate Samsung MAINTAINERS
Heiko Stübner
- [PATCH 11/11] ARM: common/vic: use proper __iomem annotations
H Hartley Sweeten
- [PATCH] ARM: ep93xx: bring back missing <mach/gpio.h>
H Hartley Sweeten
- READ THIS: the next mach-types update
H Hartley Sweeten
- [PATCHv16 0/9] Contiguous Memory Allocator
Marek Szyprowski
- [PATCH 1/9] mm: move some functions from memory_hotplug.c to page_isolation.c
Marek Szyprowski
- [PATCH 2/9] mm: alloc_contig_freed_pages() added
Marek Szyprowski
- [PATCH 3/9] mm: alloc_contig_range() added
Marek Szyprowski
- [PATCH 4/9] mm: MIGRATE_CMA migration type added
Marek Szyprowski
- [PATCH 5/9] mm: MIGRATE_CMA isolation functions added
Marek Szyprowski
- [PATCH 6/9] drivers: add Contiguous Memory Allocator
Marek Szyprowski
- [PATCH 7/7] ARM: integrate CMA with DMA-mapping subsystem
Marek Szyprowski
- [PATCH 7/9] X86: integrate CMA with DMA-mapping subsystem
Marek Szyprowski
- [PATCH 8/9] ARM: integrate CMA with DMA-mapping subsystem
Marek Szyprowski
- [PATCH 9/9] ARM: Samsung: use CMA for 2 memory banks for s5p-mfc device
Marek Szyprowski
- [PATCH 7/7] ARM: integrate CMA with DMA-mapping subsystem
Marek Szyprowski
- [PATCHv16 0/9] Contiguous Memory Allocator
Marek Szyprowski
- [Linaro-mm-sig] [PATCHv16 0/9] Contiguous Memory Allocator
Marek Szyprowski
- [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping
Marek Szyprowski
- [Linaro-mm-sig] [PATCHv16 0/9] Contiguous Memory Allocator
Marek Szyprowski
- [Linaro-mm-sig] [PATCHv16 0/9] Contiguous Memory Allocator
Marek Szyprowski
- [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping
Marek Szyprowski
- [PATCH] fixup: mm: alloc_contig_range: increase min_free_kbytes during allocation
Marek Szyprowski
- [Linaro-mm-sig] [PATCH 8/9] ARM: integrate CMA with DMA-mapping subsystem
Marek Szyprowski
- [PATCH 2/9] mm: alloc_contig_freed_pages() added
Marek Szyprowski
- [Linaro-mm-sig] [PATCH 1/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping
Marek Szyprowski
- [PATCH 0/8 v3] ARM: DMA-mapping framework redesign
Marek Szyprowski
- [PATCH 1/8] ARM: dma-mapping: remove offset parameter to prepare for generic dma_ops
Marek Szyprowski
- [PATCH 2/8] ARM: dma-mapping: use asm-generic/dma-mapping-common.h
Marek Szyprowski
- [PATCH 3/8] ARM: dma-mapping: implement dma sg methods on top of any generic dma ops
Marek Szyprowski
- [PATCH 4/8] ARM: dma-mapping: move all dma bounce code to separate dma ops structure
Marek Szyprowski
- [PATCH 5/8] ARM: dma-mapping: remove redundant code and cleanup
Marek Szyprowski
- [PATCH 6/8] common: dma-mapping: change alloc/free_coherent method to more generic alloc/free_attrs
Marek Szyprowski
- [PATCH 7/8] ARM: dma-mapping: use alloc, mmap, free from dma_ops
Marek Szyprowski
- [PATCH 8/8] ARM: dma-mapping: add support for IOMMU mapper
Marek Szyprowski
- CMA v16 and DMA-mapping v13 patch series
Marek Szyprowski
- [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader
Archit Taneja
- [PATCH 20/30] media/omap_vout: disable driver for now
Archit Taneja
- [PATCH] ARM: kprobes: work around build errors
Tixy
- [PATCH] [RFC PATCH] ARM: kprobes: Make breakpoint setting/clearing SMP safe
Tixy
- [PATCH] ARM: kprobes: only patch instructions on one CPU
Tixy
- [PATCH] [RFC PATCH] ARM: kprobes: Make breakpoint setting/clearing SMP safe
Tixy
- [PATCH] ARM: kprobes: only patch instructions on one CPU
Tixy
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Tixy
- [PATCH] ARM: kprobes: only patch instructions on one CPU
Tixy
- [PATCH 07/16] input: ambakmi: Enable module alias autogeneration for AMBA drivers
Dmitry Torokhov
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Josh Triplett
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Josh Triplett
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Josh Triplett
- [PATCH] virtio: Add platform bus driver for memory mapped virtio device
Michael S. Tsirkin
- [PATCH 1/3 v3] ARM Realview PCIX map include file changes
Colin Tuckley
- [PATCH 1/3 v3] ARM Realview PCIX map include file changes
Colin Tuckley
- [PATCH 0/5 v4] ARM Realview PCIX patch series
Colin Tuckley
- [PATCH 1/5 v4] ARM Realview PCIX map include file changes
Colin Tuckley
- [PATCH 2/5 v4] ARM Realview PCIX IRQ include file changes
Colin Tuckley
- [PATCH 3/5 v4] ARM Realview PCIX board file changes
Colin Tuckley
- [PATCH 4/5 v4] Realview PCIX support - add main support module code
Colin Tuckley
- [PATCH 5/5 v4] ARM Realview PCIX build file changes
Colin Tuckley
- [PATCH 1/5 v4] ARM Realview PCIX map include file changes
Colin Tuckley
- [PATCH 4/5 v4] Realview PCIX support - add main support module code
Colin Tuckley
- [PATCH 1/5 v4] ARM Realview PCIX map include file changes
Colin Tuckley
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Turquette, Mike
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Turquette, Mike
- [PATCH] OMAP2+: clock: use clock's recalc in DPLL handling
Turquette, Mike
- [PATCH v2 4/7] clk: Add simple gated clock
Turquette, Mike
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Turquette, Mike
- [PATCH v2 4/7] clk: Add simple gated clock
Turquette, Mike
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Turquette, Mike
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Turquette, Mike
- [PATCH v2 4/7] clk: Add simple gated clock
Turquette, Mike
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Turquette, Mike
- [PATCH v2 2/7] clk: Implement clk_set_rate
Turquette, Mike
- [PATCH v2 3/7] clk: Add fixed-rate clock
Turquette, Mike
- [PATCH 1/3] ARM: pxa168: Add SDHCI support
Tanmay Upadhyay
- [PATCH 2/3] mmc: sdhci-pxa: Add SDHCI driver for PXA16x
Tanmay Upadhyay
- [PATCH 3/3] ARM: pxa168/gplugd: Add support for SD port 1
Tanmay Upadhyay
- [PATCH 02/30] video/omap: fix dependencies
Tomi Valkeinen
- [PATCH 03/30] video/omap: fix build dependencies
Tomi Valkeinen
- [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader
Tomi Valkeinen
- [PATCH 3/4] ARM: OMAP: Remove calls to SRAM allocations for framebuffer
Tomi Valkeinen
- [PATCH 3/4] ARM: OMAP: Remove calls to SRAM allocations for framebuffer
Tomi Valkeinen
- [PATCH 24/26] ARM: pxa: centro and treo680 need palm27x
Marek Vasut
- Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011
Marek Vasut
- [PATCH 34/51] ARM: mach-pxa: use arm_arch_reset instead of arch_reset
Marek Vasut
- [PATCH] [TRIVIAL] ARM: pxa: Fix typo 'CONFIG_BACKLIGHT_PWM__MODULE'
Marek Vasut
- [PATCH v9 2/4] cpuidle: Remove CPUIDLE_FLAG_IGNORE and dev->prepare()
Arjan van de Ven
- [PATCH V3 0/4]: ARM: SAMSUNG: Add SPI clkdev support
Padmavathi Venna
- [PATCH V3 1/4] ARM: S3C64XX: Add SPI clkdev support
Padmavathi Venna
- [PATCH V3 2/4] ARM: S5PC100: Add SPI clkdev support
Padmavathi Venna
- [PATCH V3 3/4] ARM: S5P64X0: Add SPI clkdev support
Padmavathi Venna
- [PATCH V3 4/4] ARM: S5PV210: Add SPI clkdev support
Padmavathi Venna
- [PATCH V2 0/2]: Add SPI Support on Exynos4
Padmavathi Venna
- [PATCH V2 1/2] ARM: EXYNOS4: Add SPI support
Padmavathi Venna
- [RESEND][PATCH V2 0/2] Add a common macro for creating struct clk_lookup entries
Padmavathi Venna
- [RESEND][PATCH V2 1/2] ARM: CLKDEV: Add Common Macro for clk_lookup
Padmavathi Venna
- [RESEND][PATCH V2 2/2] ARM: Using CLKDEV_INIT for creating clk_lookup instance
Padmavathi Venna
- [PATCH] ARM: davinci: Use CLKDEV_INIT for creating clk_lookup
Padmavathi Venna
- [PATCH] ARM: ep93xx: Use CLKDEV_INIT for creating clk_lookup instance
Padmavathi Venna
- [PATCH] ARM: imx: Use CLKDEV_INIT for creating clk_lookup instance
Padmavathi Venna
- [PATCH] ARM: lpc32xx: Use CLKDEV_INIT for creating clk_lookup instance
Padmavathi Venna
- [PATCH] ARM: mx5: Use CLKDEV_INIT for creating clk_lookup instance
Padmavathi Venna
- [PATCH] ARM: mxs: Use CLKDEV_INIT for creating clk_lookup instance
Padmavathi Venna
- [PATCH] ARM: tcc8k: Use CLKDEV_INIT for creating clk_lookup instance
Padmavathi Venna
- [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism
Daniel Vetter
- [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism
Daniel Vetter
- [PATCH] Add missing include of linux/ftrace.h
Rabin Vincent
- [PATCH] ARM: remove bashism in check for multiple zreladdrs
Rabin Vincent
- [PATCH] ARM: kprobes: only patch instructions on one CPU
Rabin Vincent
- [PATCH] [RFC PATCH] ARM: kprobes: Make breakpoint setting/clearing SMP safe
Rabin Vincent
- [PATCH] ARM: kprobes: only patch instructions on one CPU
Rabin Vincent
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Rabin Vincent
- [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer
Rabin Vincent
- [PATCH] leds-class: change back LEDS_CLASS to tristate instead of bool
Anton Vorontsov
- [PATCH] drivers/i2c/busses/i2c-at91.c: fix brokeness
Voss, Nikolaus
- [PATCH] i2c-gpio.c: correct logic of pdata->scl_is_open_drain
Voss, Nikolaus
- orion/kirkwood and device tree support
Michael Walle
- orion/kirkwood and device tree
Michael Walle
- [PATCH] drivers: create a pin control subsystem v8
Linus Walleij
- [PATCH] mach-integrator: remove VGA_CONSOLE from defconfig
Linus Walleij
- [PATCH v2] mach-ep93xx: break out GPIO driver specifics
Linus Walleij
- [PATCH 1/2 v2] plat-pxa: move PXA GPIO driver to GPIO subsystem
Linus Walleij
- [PATCH v2 0/5] ARM: pxa: move gpio driver into drivers directory
Linus Walleij
- [PATCH] clocksource: fixup ux500 build problems
Linus Walleij
- [GIT PULL] ux500-timers
Linus Walleij
- [GIT PULL] ux500-timers
Linus Walleij
- [PATCH 2/2] pinmux: add a driver for the U300 pinmux
Linus Walleij
- [PATCH] [WATCHDOG] move coh901327 state holders
Linus Walleij
- [PATCH RESEND] ARM: smp_twd: Reconfigure clockevents after cpufreq change
Linus Walleij
- [PATCH 11/16] spi: pl022: Enable module alias autogeneration for AMBA drivers
Linus Walleij
- [PATCH RESEND] ARM: smp_twd: Reconfigure clockevents after cpufreq change
Linus Walleij
- [GIT PULL] ux500-timers
Linus Walleij
- [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets
Linus Walleij
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Linus Walleij
- [PATCH 5/9] ARM: SPMP8000: Add pinmux driver
Linus Walleij
- [PATCH 1/9] ARM: vic: Don't write to the read-only register VIC_IRQ_STATUS
Linus Walleij
- [PATCH 9/9] ARM: SPMP8000: Add Kconfig and Makefile entries to build the machine
Linus Walleij
- [PATCH 6/9] ARM: SPMP8000: Add pwm driver
Linus Walleij
- [PATCH 2/2] pinmux: add a driver for the U300 pinmux
Linus Walleij
- [PATCH 2/2] pinmux: add a driver for the U300 pinmux
Linus Walleij
- [PATCH 1/2] drivers: create a pin control subsystem v9
Linus Walleij
- [PATCH v10] pinctrl: add a driver for the U300 pinmux
Linus Walleij
- [PATCH v3] pinmux: add a driver for the CSR SiRFprimaII pinmux
Linus Walleij
- [PATCH 5/9] ARM: SPMP8000: Add pinmux driver
Linus Walleij
- [PATCH 1/2] drivers: create a pin control subsystem v9
Linus Walleij
- [PATCH] ARM: S3C64XX: Enable TCM support
Linus Walleij
- [PATCH v3 6/7] ARM: pxa: move gpio-pxa.h into include directory
Linus Walleij
- [PATCH] mmc: mmci: Do not release spinlock in request_end
Linus Walleij
- [PATCH 1/2] drivers: create a pin control subsystem v9
Linus Walleij
- [PATCH 1/2] drivers: create a pin control subsystem v9
Linus Walleij
- [PATCH 4/9] ARM: SPMP8000: Add ADC driver
Linus Walleij
- [PATCH] ARM: ep93xx: bring back missing <mach/gpio.h>
Linus Walleij
- [PATCH v2] mach-ep93xx: break out GPIO driver specifics
Linus Walleij
- [PATCH 1/2] drivers: create a pin control subsystem v9
Linus Walleij
- [PATCH] mmc: mmci: Do not release spinlock in request_end
Linus Walleij
- [PATCH 1/3] spi/pl022: fix build warnings
Linus Walleij
- [PATCH 2/3] spi/pl022: disable the PL022 block when unused
Linus Walleij
- [PATCH 3/3] spi/pl022: skip default configuration before suspending
Linus Walleij
- [PATCH v3] dmaengine: add CSR SiRFprimaII DMAC driver
Linus Walleij
- pinctrl_config APIs, and other pinmux questions
Linus Walleij
- pinctrl_config APIs, and other pinmux questions
Linus Walleij
- [PATCH] amba: be more careful in runtime_suspend/resume
Linus Walleij
- [PATCH] amba: be more careful in runtime_suspend/resume
Linus Walleij
- [PATCH v2] UART: add CSR SiRFprimaII SoC on-chip uart drivers
Linus Walleij
- pinctrl_config APIs, and other pinmux questions
Linus Walleij
- Update: ARM Sub-Architecture Maintainers workshop at Kernel Summit 2011
Linus Walleij
- [PATCH] spi/pl022: Enable clock in probe an use runtime_idle
Linus Walleij
- [PATCH] drivers: create a pin control subsystem v8
Linus Walleij
- [PATCH] drivers: create a pin control subsystem v8
Linus Walleij
- [PATCH] mmc: mmci: Improve runtime PM support
Linus Walleij
- [PATCH] mmc: mmci: Improve runtime PM support
Linus Walleij
- [PATCH] mmc: mmci: Improve runtime PM support
Linus Walleij
- [PATCH] mmc: mmci: Improve runtime PM support
Linus Walleij
- [PATCH] drivers: create a pin control subsystem v8
Linus Walleij
- [PATCH] spi/pl022: Enable clock in probe an use runtime_idle
Linus Walleij
- [PATCH] mmc: mmci: Improve runtime PM support
Linus Walleij
- [RFC] ARM: at91: gpio add mux check
Linus Walleij
- [PATCH 1/1] pinctrl/sirf: fix sirfsoc_get_group_pins prototype introduce in 7e570f97
Linus Walleij
- [PATCH] mmc: mmci: Improve runtime PM support
Linus Walleij
- [RFC] ARM: at91: gpio add mux check
Linus Walleij
- [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend
Linus Walleij
- [PATCH] gpio: fix a build failure on KS8695 GPIO
Linus Walleij
- [PATCH] asm-generic/gpio.h: merge basic gpiolib wrappers
Linus Walleij
- [PATCH] davinci: mark GPIO implementation complex
Linus Walleij
- [PATCH 42/51] ARM: mach-u300: use arm_arch_reset instead of arch_reset
Linus Walleij
- [PATCH] pinctrl: Fix "warning: 'struct pinctrl_dev' declared inside parameter list"
Linus Walleij
- [PATCH] ARM: mark empty gpio.h files empty
Linus Walleij
- [PATCH] ARM: mark empty gpio.h files empty
Linus Walleij
- [PATCH 08/30] ARM: omap2+: fix building without i2c
Paul Walmsley
- [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader
Paul Walmsley
- [PATCH 1/9] OMAP2xxx: HWMOD: Fix DSS reset
Paul Walmsley
- [PATCH 3/9] OMAP3: HWMOD: Fix DSS reset
Paul Walmsley
- [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader
Paul Walmsley
- [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader
Paul Walmsley
- [PATCH v2] OMAP2PLUS: DSS: Ensure DSS works correctly if display is enabled in bootloader
Paul Walmsley
- [RFC PATCH v2 0/6] TI81XX: Add clock and hwmod data
Paul Walmsley
- [RFC PATCH 0/5] Rework of the TI81xx PRCM support
Paul Walmsley
- [RFC PATCH 1/5] ARM: OMAP: TI81XX: prcm: Add module and register offsets
Paul Walmsley
- [RFC PATCH 2/5] ARM: OMAP: TI81xx: add powerdomain code
Paul Walmsley
- [RFC PATCH 3/5] ARM: OMAP: TI81xx: add powerdomain data
Paul Walmsley
- [RFC PATCH 4/5] ARM: OMAP: TI81xx: add clockdomain control code
Paul Walmsley
- [RFC PATCH 5/5] ARM: OMAP: TI81xx: add clockdomain data
Paul Walmsley
- [RFC PATCH v2 0/6] TI81XX: Add clock and hwmod data
Paul Walmsley
- [RFC PATCH v2 2/6] TI816X: clock: Add clock data
Paul Walmsley
- [PATCH] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection
Paul Walmsley
- [PATCH] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection
Paul Walmsley
- [PATCH] ARM: OMAP3: PM: restrict erratum i443 handling to OMAP3430 only
Paul Walmsley
- [PATCH] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection
Paul Walmsley
- [PATCH v2] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection
Paul Walmsley
- [PATCH] ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list
Paul Walmsley
- [PATCH 0/2] MMC: disable multiblock reads on controllers that don't support them
Paul Walmsley
- [PATCH 1/2] MMC: add workaround for controllers with broken multiblock reads
Paul Walmsley
- [PATCH 2/2] MMC: omap_hsmmc: disable multiblock reads when platform_data indicates that they are broken
Paul Walmsley
- [PATCH] ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1
Paul Walmsley
- [PATCH v3] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection
Paul Walmsley
- [PATCH] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection
Paul Walmsley
- [PATCH v2] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection
Paul Walmsley
- [PATCH v3] ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection
Paul Walmsley
- [PATCH] ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list
Paul Walmsley
- [PATCH v2] ARM: OMAP3: hwmod: fix variant registration and remove SmartReflex from common list
Paul Walmsley
- [GIT PULL] ARM: OMAP: DSS hwmod/reset fixes for 3.2
Paul Walmsley
- [PATCH v2 5/6] OMAP3+: Update DPLL Fint range for OMAP36xx and OMAP4xxx devices
Paul Walmsley
- [PATCH v2 6/6] OMAP4: Clock: Correct the name of SLIMBUS interface clocks
Paul Walmsley
- [PATCH] OMAP2+: clock: use clock's recalc in DPLL handling
Paul Walmsley
- [GIT PULL] ARM: OMAP3+: clock fixes for 3.2
Paul Walmsley
- [GIT PULL] ARM: OMAP3+: clock fixes for 3.2
Paul Walmsley
- [PATCH 2/4] ARM: OMAP4 PM: Add IO Daisychain support
Paul Walmsley
- [PATCH 1/4] ARM: OMAP3 PM: Fix IO Daisychain sequence
Paul Walmsley
- [PATCH v5 1/3] AM35x: Using OMAP3 generic hwmods
Paul Walmsley
- [GIT PULL] ARM: OMAP: PRCM/SCM/hwmod miscellaneous fixes for 3.2
Paul Walmsley
- [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod
Paul Walmsley
- [GIT PULL] ARM: OMAP: new miscellaneous clock/hwmod data for 3.2
Paul Walmsley
- [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod
Paul Walmsley
- [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod
Paul Walmsley
- [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod
Paul Walmsley
- [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod
Paul Walmsley
- [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod
Paul Walmsley
- [PATCHv9 03/18] TEMP: OMAP3xxx: hwmod data: add PRM hwmod
Paul Walmsley
- [GIT PULL] ARM: OMAP: Runtime PM/hwmod conversion for HS USBHOST
Paul Walmsley
- [PATCH v5 3/7] arm: perf: support device with other non-irq resources
Paul Walmsley
- [PATCH v5 3/7] arm: perf: support device with other non-irq resources
Paul Walmsley
- [PATCH] mx5: modify pm and idle
Hui Wang
- [PATCH] mx5: modify pm and idle
Hui Wang
- [V2] ARM: mx5: use generic irq chip pm interface for pm functions on
Hui Wang
- [PATCH 2/5] drivercore: Add driver probe deferral mechanism
Andrei Warkentin
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Stephen Warren
- [PATCH v4 05/10] ARM: SoC: convert Tegra to SoC descriptor
Stephen Warren
- [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities
Stephen Warren
- [PATCH v7 0/3] Add support for tegra2 based ventana board
Stephen Warren
- [PATCH v7 3/3] arm/tegra: device tree support for ventana board
Stephen Warren
- [PATCH] MAINTAINERS: Update tegra maintainer information
Stephen Warren
- [PATCH v7 3/3] arm/tegra: device tree support for ventana board
Stephen Warren
- [PATCH v2 00/14] Sparse fixes for tegra
Stephen Warren
- [PATCH 2/3] mmc: Add OF bindings support for mmc host controller capabilities
Stephen Warren
- [PATCH v8 3/3] arm/tegra: device tree support for ventana board
Stephen Warren
- [PATCH] arm/tegra: Harmony: Configure PMC for low-level interrupts
Stephen Warren
- [PATCH v2 0/4] arm/tegra: Convert GPIO and pinmux to platform devs
Stephen Warren
- [PATCH v2 1/4] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
Stephen Warren
- [PATCH v2 2/4] arm/dt: Tegra: Add pinmux node to tegra20.dtsi
Stephen Warren
- [PATCH v2 3/4] gpio/tegra: Convert to a platform device
Stephen Warren
- [PATCH v2 4/4] arm/tegra: Convert pinmux driver to a platform device
Stephen Warren
- [PATCH v4 1/4] arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
Stephen Warren
- [PATCH v4 2/4] arm/dt: Tegra: Add pinmux node to tegra20.dtsi
Stephen Warren
- [PATCH v4 3/4] gpio/tegra: Convert to a platform device
Stephen Warren
- [PATCH v4 4/4] arm/tegra: Convert pinmux driver to a platform device
Stephen Warren
- [PATCH] arm/tegra: pinmux: ioremap registers
Stephen Warren
- [PATCH v2] arm/tegra: pinmux: ioremap registers
Stephen Warren
- [PATCH v9 0/3] Add support for tegra2 based ventana board
Stephen Warren
- [PATCH v4 3/4] gpio/tegra: Convert to a platform device
Stephen Warren
- [PATCH] [RESEND] ARM: tegra: devices.c should include devices.h
Stephen Warren
- [PATCH] ARM: tegra: update defconfig
Stephen Warren
- [PATCH] ARM: tegra: update defconfig
Stephen Warren
- [PATCH v4 3/4] gpio/tegra: Convert to a platform device
Stephen Warren
- [PATCH] ARM: tegra: Add sound support to tegra_defconfig
Stephen Warren
- pinctrl_config APIs, and other pinmux questions
Stephen Warren
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Stephen Warren
- pinctrl_config APIs, and other pinmux questions
Stephen Warren
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Stephen Warren
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Stephen Warren
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Stephen Warren
- [PATCH] arm/tegra: select AUTO_ZRELADDR by default
Stephen Warren
- pinctrl_config APIs, and other pinmux questions
Stephen Warren
- pinctrl_config APIs, and other pinmux questions
Stephen Warren
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Stephen Warren
- [PATCH] [3.3] ARM: tegra: use APB DMA for accessing APB devices
Stephen Warren
- [PATCH] [3.3] [RESEND] ARM: tegra: fuse: use apbio dma for register access
Stephen Warren
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Stephen Warren
- [PATCH] [3.3] ARM: tegra: use APB DMA for accessing APB devices
Stephen Warren
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Stephen Warren
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Stephen Warren
- [PATCH] arm/dt: Fix ventana SDHCI power-gpios
Stephen Warren
- [RFC] [PATCH] ARM: tegra: emc: device tree bindings
Stephen Warren
- [PATCH] arm/tegra: Don't create duplicate gpio and pinmux devices
Stephen Warren
- [PATCH] arm/tegra: Add device-tree support for TrimSlice board
Stephen Warren
- [PATCH] arm/tegra: Don't create duplicate gpio and pinmux devices
Stephen Warren
- [PATCH 1/1] pinctrl/sirf: fix sirfsoc_get_group_pins prototype introduce in 7e570f97
Stephen Warren
- [PATCH] arm/tegra: Add device-tree support for TrimSlice board
Stephen Warren
- [RFC] ARM: at91: gpio add mux check
Stephen Warren
- [PATCH 3/3] arm/dt: tegra: add dts file for paz00
Stephen Warren
- [PATCH v3 1/3] dt: add empty of_machine_is_compatible
Stephen Warren
- [PATCH v3 2/3] arm/tegra: Don't create duplicate gpio and pinmux devices
Stephen Warren
- [PATCH v3 3/3] arm/tegra: Add device-tree support for TrimSlice board
Stephen Warren
- [PATCH 3/3] arm/dt: tegra: add dts file for paz00
Stephen Warren
- [PATCH 3/3] arm/dt: tegra: add dts file for paz00
Stephen Warren
- Tegra T20 / T25 datasheet (Technical Reference Manual)
Stephen Warren
- [PATCHv2] arm/tegra: clk_get should not be fatal
Stephen Warren
- [PATCH 1/6] arm/tegra: initial device tree for tegra30
Stephen Warren
- [PATCH 2/6] arm/tegra: prepare pinmux code for multiple tegra variants
Stephen Warren
- [PATCH 3/6] arm/tegra: prepare early init for multiple tegra variants
Stephen Warren
- [PATCH 4/6] arm/tegra: implement support for tegra30
Stephen Warren
- [PATCH 5/6] arm/tegra: pinmux tables and definitions for tegra30
Stephen Warren
- [PATCH 6/6] arm/tegra: add support for tegra30 based board cardhu
Stephen Warren
- [PATCH 2/6] arm/tegra: prepare pinmux code for multiple tegra variants
Stephen Warren
- [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00
Stephen Warren
- [PATCH] arch: arm: tegra: Enable headphone detection gpio
Stephen Warren
- [RFC PATCH] arm: dma: Drop GFP_COMP for DMA memory allocations
Stephen Warren
- [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00
Stephen Warren
- [PATCH v2 2/3] arm/dt: tegra: add dts file for paz00
Stephen Warren
- [PATCH 1/3] ARM: tegra: paz00: add support for wakeup gpio key
Stephen Warren
- [PATCH 3/3] arm/dt: tegra: add dts file for paz00
Stephen Warren
- [PATCH 2/3] staging: nvec: add device tree support
Stephen Warren
- [RFC][PATCH] plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired
Lothar Waßmann
- [PATCH] ARM: zImage: Use $(CROSS_COMPILE)size to get .bss size
Thomas Weber
- [PATCHv2] ARM: zImage: Use $(CROSS_COMPILE)size to get .bss size
Thomas Weber
- [PATCH v2] mach-ep93xx: break out GPIO driver specifics
Mika Westerberg
- [PATCH v2] mach-ep93xx: break out GPIO driver specifics
Mika Westerberg
- [PATCH] ARM: ep93xx: bring back missing <mach/gpio.h>
Mika Westerberg
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
Bryan Wu
- [PATCH v4 0/3] add Atmel ISI, ov2640 support for sam9m10/sam9g45
Josh Wu
- [PATCH v4 1/3] [media] at91: add code to enable/disable ISI_MCK clock
Josh Wu
- [PATCH v4 2/3] at91: add parameters for at91_add_device_isi function
Josh Wu
- [PATCH v4 3/3] at91: add Atmel ISI and ov2640 support on sam9m10/sam9g45 board
Josh Wu
- [PATCH v4 1/3] [media] at91: add code to enable/disable ISI_MCK clock
Wu, Josh
- [RESEND][PATCH v4 2/3] at91: add parameters for at91_add_device_isi function
Josh Wu
- [RESEND][PATCH v4 3/3] at91: add Atmel ISI and ov2640 support on sam9m10/sam9g45 board
Josh Wu
- [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210
Rafael J. Wysocki
- [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210
Rafael J. Wysocki
- [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210
Rafael J. Wysocki
- [PATCH 0/4] ARM: EXYNOS4: Support generic Power domain framework for EXYNOS4210
Rafael J. Wysocki
- [PATCH] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file
Rafael J. Wysocki
- [PATCH v2] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file
Rafael J. Wysocki
- [PATCH v2] PM: HIBERNATION: add resume_wait param to support MMC-like devices as resume file
Rafael J. Wysocki
- [PATCH] PM: HIBERNATION: add resume_delay kernel param as well as resume_delay
Rafael J. Wysocki
- [RESEND PATCH] PM / Clocks: Remove redundant NULL checks before kfree()
Rafael J. Wysocki
- [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets
Stefan Nilsson XK
- [PATCH 4/4] mmc: mmci: Fix incorrect handling of HW flow control for SDIO
Stefan Nilsson XK
- [PATCH 1/4] mmc: mmci: Bugfix in pio read for small packets
Stefan Nilsson XK
- [PATCH] mmc: mmci: Fix PIO read for small SDIO packets
Stefan Nilsson XK
- [PATCH 2/2] ARM: ux500: Support SD cards on HREFv60 boards
Stefan Nilsson XK
- [PATCH] ARM: ux500: Add device sdi1 for SDIO
Stefan Nilsson XK
- [PATCHv2] hw_random: add driver for atmel true hardware random number generator
Herbert Xu
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
David Yang
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
David Yang
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
David Yang
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
David Yang
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
David Yang
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
David Yang
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
David Yang
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
David Yang
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
David Yang
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
David Yang
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
David Yang
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
David Yang
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
David Yang
- Question about: linux-linaro-2.6.38.7 booting the ubuntu 10.10 filesystem
David Yang
- [PATCH 5/7] ARM: EXYNOS4: Add support external GIC
Changhwan Youn
- [PATCH 1/3] ARM: Samsung: Move timer irq numbers to end of linux irq space
Changhwan Youn
- [patch] ARM: smpboot: Enable interrupts after marking CPU online/active
Dima Zavin
- [patch] ARM: smpboot: Enable interrupts after marking CPU online/active
Dima Zavin
- [PATCH 03/49] arm: irq: Remove IRQF_DISABLED
Yong Zhang
- [PATCH 24/49] SCSI: irq: Remove IRQF_DISABLED
Yong Zhang
- [PATCH 29/49] dmaengine: irq: Remove IRQF_DISABLED
Yong Zhang
- [PATCH 32/49] media: irq: Remove IRQF_DISABLED
Yong Zhang
- [PATCH 42/49] rtc: irq: Remove IRQF_DISABLED
Yong Zhang
- [PATCH 45/49] watchdog: irq: Remove IRQF_DISABLED
Yong Zhang
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Richard Zhao
- [PATCH v2 2/7] clk: Implement clk_set_rate
Richard Zhao
- [PATCH v2 4/7] clk: Add simple gated clock
Richard Zhao
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Richard Zhao
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Richard Zhao
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Richard Zhao
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Richard Zhao
- [PATCH v2 4/7] clk: Add simple gated clock
Richard Zhao
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Richard Zhao
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Richard Zhao
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Richard Zhao
- [PATCH v2 1/7] clk: Add a generic clock infrastructure
Richard Zhao
- [PATCH v2 0/5] ARM: pxa: move gpio driver into drivers directory
Haojian Zhuang
- [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa
Haojian Zhuang
- [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa
Haojian Zhuang
- [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa
Haojian Zhuang
- [PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa
Haojian Zhuang
- [PATCH v3 0/7] clean pxa gpio driver
Haojian Zhuang
- [PATCH v3 1/7] ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ
Haojian Zhuang
- [PATCH v3 2/7] ARM: pxa: use chained interrupt for GPIO0 and GPIO1
Haojian Zhuang
- [PATCH v3 3/7] ARM: pxa: rename gpio_to_irq and irq_to_gpio
Haojian Zhuang
- [PATCH v3 4/7] ARM: pxa: rename NR_BUILTIN_GPIO
Haojian Zhuang
- [PATCH v3 5/7] ARM: pxa: change gpio driver to platform driver
Haojian Zhuang
- [PATCH v3 6/7] ARM: pxa: move gpio-pxa.h into include directory
Haojian Zhuang
- [PATCH v3 7/7] ARM: pxa: add clk support in gpio driver
Haojian Zhuang
- [PATCH v3 6/7] ARM: pxa: move gpio-pxa.h into include directory
Haojian Zhuang
- [PATCH v4 0/8] Clean gpio in arch-pxa and arch-mmp
Haojian Zhuang
- [PATCH v4 1/8] ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ
Haojian Zhuang
- [PATCH v4 2/8] ARM: pxa: use chained interrupt for GPIO0 and GPIO1
Haojian Zhuang
- [PATCH v4 3/8] ARM: pxa: rename gpio_to_irq and irq_to_gpio
Haojian Zhuang
- [PATCH v4 4/8] ARM: pxa: rename NR_BUILTIN_GPIO
Haojian Zhuang
- [PATCH v4 5/8] ARM: pxa: change gpio driver to platform driver
Haojian Zhuang
- [PATCH v4 6/8] ARM: pxa: move gpio-pxa.h into include directory
Haojian Zhuang
- [PATCH v4 7/8] ARM: pxa: add clk support in gpio driver
Haojian Zhuang
- [PATCH v4 8/8] ARM: pxa: move macros into gpio-pxa.c
Haojian Zhuang
- [PATCH v4 3/8] ARM: pxa: rename gpio_to_irq and irq_to_gpio
Haojian Zhuang
- [PATCH v4 3/8] ARM: pxa: rename gpio_to_irq and irq_to_gpio
Haojian Zhuang
- [PATCH v4 8/8] ARM: pxa: move macros into gpio-pxa.c
Haojian Zhuang
- [PATCH v5 00/11] change gpio as platform driver
Haojian Zhuang
- [PATCH v5 01/11] ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ
Haojian Zhuang
- [PATCH v5 02/11] ARM: pxa: use chained interrupt for GPIO0 and GPIO1
Haojian Zhuang
- [PATCH v5 03/11] ARM: pxa: rename gpio_to_irq and irq_to_gpio
Haojian Zhuang
- [PATCH v5 04/11] ARM: pxa: recognize gpio number and type
Haojian Zhuang
- [PATCH v5 05/11] ARM: pxa: rename NR_BUILTIN_GPIO
Haojian Zhuang
- [PATCH v5 06/11] ARM: pxa: remove head file in plat-pxa
Haojian Zhuang
- [PATCH v5 07/11] ARM: pxa: use little endian read write in gpio driver
Haojian Zhuang
- [PATCH v5 08/11] ARM: pxa: use generic gpio operation instead of gpio register
Haojian Zhuang
- [PATCH v5 09/11] ARM: pxa: change gpio to platform device
Haojian Zhuang
- [PATCH v5 10/11] ARM: mmp: clear gpio edge detect
Haojian Zhuang
- [PATCH v5 11/11] ARM: pxa: add clk support in gpio driver
Haojian Zhuang
- [PATCH] regulator: max8649 Convert max8649 to user regmap api
Haojian Zhuang
- [PATCH v2] regulator: max8649 Convert max8649 to use regmap api
Haojian Zhuang
- [PATCH v5 00/11] change gpio as platform driver
Haojian Zhuang
- sched: ARM: arch_scale_freq_power
Peter Zijlstra
- sched: ARM: arch_scale_freq_power
Peter Zijlstra
- sched: ARM: arch_scale_freq_power
Peter Zijlstra
- sched: ARM: arch_scale_freq_power
Peter Zijlstra
- sched: ARM: arch_scale_freq_power
Peter Zijlstra
- [PATCH] ARM: debug: provide dummy default option for DEBUG_LL UART choice
Marc Zyngier
- [PATCH v4 0/4] genirq: handling GIC per-cpu interrupts
Marc Zyngier
- [PATCH v4 1/4] genirq: Add support for per-cpu dev_id interrupts
Marc Zyngier
- [PATCH v4 2/4] genirq: percpu: allow interrupt type to be set at enable time
Marc Zyngier
- [PATCH v4 3/4] ARM: gic: consolidate PPI handling
Marc Zyngier
- [PATCH v4 4/4] ARM: gic, local timers: use the request_percpu_irq() interface
Marc Zyngier
- [PATCH v4 00/10] Per SoC descriptor
Marc Zyngier
- [PATCH v4 01/10] ARM: SoC: Introduce per SoC descriptor
Marc Zyngier
- [PATCH v4 02/10] ARM: SoC: Add per SoC SMP and CPU hotplug operations
Marc Zyngier
- [PATCH v4 03/10] ARM: SoC: convert VExpress/RealView to SoC descriptor
Marc Zyngier
- [PATCH v4 04/10] ARM: SoC: convert OMAP4 to SoC descriptor
Marc Zyngier
- [PATCH v4 05/10] ARM: SoC: convert Tegra to SoC descriptor
Marc Zyngier
- [PATCH v4 06/10] ARM: SoC: convert Exynos4 to SoC descriptor
Marc Zyngier
- [PATCH v4 07/10] ARM: SoC: convert MSM SMP to SoC descriptor
Marc Zyngier
- [PATCH v4 08/10] ARM: SoC: convert ux500 to SoC descriptor
Marc Zyngier
- [PATCH v4 09/10] ARM: SoC: convert shmobile sh73a0 to SoC descriptor
Marc Zyngier
- [PATCH v4 10/10] ARM: smp: Make SoC descriptor mandatory for SMP platforms
Marc Zyngier
- [PATCH v4 02/10] ARM: SoC: Add per SoC SMP and CPU hotplug operations
Marc Zyngier
- [PATCH v4 04/10] ARM: SoC: convert OMAP4 to SoC descriptor
Marc Zyngier
- [PATCH v4 05/10] ARM: SoC: convert Tegra to SoC descriptor
Marc Zyngier
- [PATCH v4 06/10] ARM: SoC: convert Exynos4 to SoC descriptor
Marc Zyngier
- [PATCH v4 06/10] ARM: SoC: convert Exynos4 to SoC descriptor
Marc Zyngier
- [PATCH 5/7] ARM: EXYNOS4: Add support external GIC
Marc Zyngier
- [PATCH 5/7] ARM: EXYNOS4: Add support external GIC
Marc Zyngier
- [PATCH] ARM: gic: allow GIC to support non-banked setups
Marc Zyngier
- [PATCH 5/7] ARM: EXYNOS4: Add support external GIC
Marc Zyngier
- [PATCH 5/7] ARM: EXYNOS4: Add support external GIC
Marc Zyngier
- [PATCH v5 00/10] Per SoC descriptor
Marc Zyngier
- [PATCH v5 01/10] ARM: SoC: Introduce per SoC descriptor
Marc Zyngier
- [PATCH v5 02/10] ARM: SoC: Add per SoC SMP and CPU hotplug operations
Marc Zyngier
- [PATCH v5 03/10] ARM: SoC: convert VExpress/RealView to SoC descriptor
Marc Zyngier
- [PATCH v5 04/10] ARM: SoC: convert OMAP4 to SoC descriptor
Marc Zyngier
- [PATCH v5 05/10] ARM: SoC: convert Tegra to SoC descriptor
Marc Zyngier
- [PATCH v5 06/10] ARM: SoC: convert Exynos4 to SoC descriptor
Marc Zyngier
- [PATCH v5 07/10] ARM: SoC: convert MSM SMP to SoC descriptor
Marc Zyngier
- [PATCH v5 08/10] ARM: SoC: convert ux500 to SoC descriptor
Marc Zyngier
- [PATCH v5 09/10] ARM: SoC: convert shmobile sh73a0 to SoC descriptor
Marc Zyngier
- [PATCH v5 10/10] ARM: smp: Make SoC descriptor mandatory for SMP platforms
Marc Zyngier
- [PATCH 5/7] ARM: EXYNOS4: Add support external GIC
Marc Zyngier
- [PATCH v5 00/10] Per SoC descriptor
Marc Zyngier
- [PATCH v4 0/4] genirq: handling GIC per-cpu interrupts
Marc Zyngier
- [PATCH v4 0/4] genirq: handling GIC per-cpu interrupts
Marc Zyngier
- [GIT PULL] genirq support for GIC PPIs
Marc Zyngier
- [GIT PULL] genirq support for GIC PPIs
Marc Zyngier
- [GIT PULL] genirq support for GIC PPIs
Marc Zyngier
- GIC MULTI_IRQ_HANDLER branches
Marc Zyngier
- [PATCH v5 0/7] arm: pmu: support pmu/perf on OMAP4
ming.lei at canonical.com
- [PATCH v5 1/7] arm: introduce cross trigger interface helpers
ming.lei at canonical.com
- [PATCH v5 2/7] arm: pmu: allow platform specific irq enable/disable handling
ming.lei at canonical.com
- [PATCH v5 3/7] arm: perf: support device with other non-irq resources
ming.lei at canonical.com
- [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod
ming.lei at canonical.com
- [PATCH v5 5/7] arm: omap4: create pmu device via hwmod
ming.lei at canonical.com
- [PATCH v5 6/7] arm: omap4: support pmu
ming.lei at canonical.com
- [PATCH v5 7/7] arm: omap4: pmu: support runtime pm
ming.lei at canonical.com
- [PATCH] ARM imx51: Add Armadeus systems APF51 support
julien.boibessot at free.fr
- [RESEND][PATCH] PM / Clocks: Remove redundant NULL checks before kfree
jhbird.choi at gmail.com
- [PATCH v2] regulator: max8649 Convert max8649 to use regmap api
jhbird.choi at gmail.com
- [PATCH] ARM: SAMSUNG: Fix compile error due to kfree
jhbird.choi at gmail.com
- [PATCH] max8997_charger: Fix unsigned value for less than zero
jhbird.choi at gmail.com
- please add MACH_APF9328 to mach-types
gwenhael.goavec
- [PATCH 2/2] [ARM] MX1:apf9328: Add i2c support
gwenhael.goavec
- [PATCH 2/2] [ARM] MX1:apf9328: Add i2c support
gwenhael.goavec
- Message could not be delivered
linux-arm-kernel at lists.infradead.org
- [RFC/PATCH 0/7] ARM: ARM11 MPCore preemption/task migration cache coherency fixups
gdavis at mvista.com
- [RFC/PATCH 1/7] ARM: ARM11 MPCore: pgd_alloc is not preempt safe
gdavis at mvista.com
- [RFC/PATCH 2/7] ARM: ARM11 MPCore: pte_alloc_one{, _kernel} are not preempt safe
gdavis at mvista.com
- [RFC/PATCH 3/7] ARM: ARM11 MPCore: {clean, flush}_pmd_entry are not preempt safe
gdavis at mvista.com
- [RFC/PATCH 4/7] ARM: ARM11 MPCore: clean_dcache_area is not preempt safe
gdavis at mvista.com
- [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>
gdavis at mvista.com
- [RFC/PATCH 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe
gdavis at mvista.com
- [RFC/PATCH 7/7] ARM: ARM11 MPCore: cpu_v6_set_pte_ext is not preempt safe
gdavis at mvista.com
- [RFC/PATCH v2 0/7] ARM11 MPCore: preemption/task migration cache coherency fixups
gdavis at mvista.com
- [RFC/PATCH 1/7] ARM: ARM11 MPCore: pgd_alloc is not preempt safe
gdavis at mvista.com
- [RFC/PATCH 2/7] ARM: ARM11 MPCore: pte_alloc_one{, _kernel} are not preempt safe
gdavis at mvista.com
- [RFC/PATCH 3/7] ARM: ARM11 MPCore: {clean, flush}_pmd_entry are not preempt safe
gdavis at mvista.com
- [RFC/PATCH 4/7] ARM: ARM11 MPCore: clean_dcache_area is not preempt safe
gdavis at mvista.com
- [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>
gdavis at mvista.com
- [RFC/PATCH 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe
gdavis at mvista.com
- [RFC/PATCH 7/7] ARM: ARM11 MPCore: cpu_v6_set_pte_ext is not preempt safe
gdavis at mvista.com
- [RFC/PATCH v3 0/7] ARM11 MPCore: preemption/task migration cache coherency fixups
gdavis at mvista.com
- [RFC/PATCH v3 1/7] ARM: ARM11 MPCore: pgd_alloc is not preempt safe
gdavis at mvista.com
- [RFC/PATCH v3 2/7] ARM: ARM11 MPCore: pte_alloc_one{, _kernel} are not preempt safe
gdavis at mvista.com
- [RFC/PATCH v3 3/7] ARM: ARM11 MPCore: {clean, flush}_pmd_entry are not preempt safe
gdavis at mvista.com
- [RFC/PATCH v3 4/7] ARM: ARM11 MPCore: clean_dcache_area is not preempt safe
gdavis at mvista.com
- [RFC/PATCH v3 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>
gdavis at mvista.com
- [RFC/PATCH v3 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe
gdavis at mvista.com
- [RFC/PATCH v3 7/7] ARM: ARM11 MPCore: cpu_v6_set_pte_ext is not preempt safe
gdavis at mvista.com
- [RFC/PATCH 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>
gdavis at mvista.com
- [RFC/PATCH v4 0/7] ARM11 MPCore: preemption/task migration cache coherency fixups
gdavis at mvista.com
- [RFC/PATCH v4 1/7] ARM: ARM11 MPCore: pgd_alloc is not preempt safe
gdavis at mvista.com
- [RFC/PATCH v4 2/7] ARM: ARM11 MPCore: pte_alloc_one{, _kernel} are not preempt safe
gdavis at mvista.com
- [RFC/PATCH v4 3/7] ARM: ARM11 MPCore: {clean, flush}_pmd_entry are not preempt safe
gdavis at mvista.com
- [RFC/PATCH v4 4/7] ARM: ARM11 MPCore: clean_dcache_area is not preempt safe
gdavis at mvista.com
- [RFC/PATCH v4 5/7] ARM: Move get_thread_info macro definition to <asm/assembler.h>
gdavis at mvista.com
- [RFC/PATCH v4 6/7] ARM: ARM11 MPCore: DMA_CACHE_RWFO operations are not preempt safe
gdavis at mvista.com
- [RFC/PATCH v4 7/7] ARM: ARM11 MPCore: cpu_v6_set_pte_ext is not preempt safe
gdavis at mvista.com
- [PATCH v9 0/3] Add support for tegra2 based ventana board
pdeschrijver at nvidia.com
- [PATCH v9 1/3] arm/tegra: prepare Seaboard pinmux code for derived boards
pdeschrijver at nvidia.com
- [PATCH v9 2/3] arm/tegra: add support for ventana pinmuxing
pdeschrijver at nvidia.com
- [PATCH v9 3/3] arm/tegra: device tree support for ventana board
pdeschrijver at nvidia.com
- [PATCH] arm/tegra: clk_get should not be fatal
pdeschrijver at nvidia.com
- [PATCH 0/6] Add support for tegra30 and cardhu
pdeschrijver at nvidia.com
- [PATCH 1/6] arm/tegra: initial device tree for tegra30
pdeschrijver at nvidia.com
- [PATCH 2/6] arm/tegra: prepare pinmux code for multiple tegra variants
pdeschrijver at nvidia.com
- [PATCH 3/6] arm/tegra: prepare early init for multiple tegra variants
pdeschrijver at nvidia.com
- [PATCH 4/6] arm/tegra: implement support for tegra30
pdeschrijver at nvidia.com
- [PATCH 5/6] arm/tegra: pinmux tables and definitions for tegra30
pdeschrijver at nvidia.com
- [PATCH 6/6] arm/tegra: add support for tegra30 based board cardhu
pdeschrijver at nvidia.com
- [PATCHv2] arm/tegra: clk_get should not be fatal
pdeschrijver at nvidia.com
- Your email requires verification verify#BnPqIJe51L0EH_wVSi4DF-1318355582)
bhook at pyrogon.com
- [PATCH] regulator: max8649 Convert max8649 to user regmap api
jhbird.choi at samsung.com
- [PATCH] PM / Clocks: Remove redundant NULL checks before kfree()
jhbird.choi at samsung.com
- [RESEND PATCH] PM / Clocks: Remove redundant NULL checks before kfree()
jhbird.choi at samsung.com
- [PATCH v2] regulator: max8649 Convert max8649 to use regmap api
jhbird.choi at samsung.com
- [PATCH] regulator: Use regmap_read/write(), regmap_update_bits functions directly
jhbird.choi at samsung.com
- Oops #817 on ARM MPCore with 2.6.22-rc3
shaiju
- [PATCH 1/2] ARM: CLKDEV: Add Common Macro for clk_lookup
padma venkat
- [PATCH 1/5] drivercore: add new error value for deferred probe
Valdis.Kletnieks at vt.edu
- 群发软件+买家搜索机+最新广交会买家、海关数据,B2B询盘买家500万。
仅10元每天。
- Realtek ALC530 codec driver
卞磊
- "dma-mapping: fix for speculative prefetching" patch for 2.6.31.2
吳信賢
Last message date:
Mon Oct 31 23:26:46 EDT 2011
Archived on: Mon Oct 31 23:27:09 EDT 2011
This archive was generated by
Pipermail 0.09 (Mailman edition).