[PATCH v2 5/5] regulator: map consumer regulator based on device tree

Rajendra Nayak rnayak at ti.com
Mon Oct 10 12:19:38 EDT 2011


Device nodes in DT can associate themselves with one or more
regulators/supply by providing a list of phandles (to regulator nodes)
and corresponding supply names.

For Example:
	devicenode: node at 0x0 {
		...
		...
		vmmc-supply = <&regulator1>;
		vpll-supply = <&regulator1>;
	};

The driver would then do a regulator_get(dev, "vmmc"); to get
regulator1 and do a regulator_get(dev, "vpll"); to get
regulator2.

of_get_regulator() extracts the regulator node for a given
device, based on the supply name.

Use it to look up the regulator for a given consumer from device tree, during
a regulator_get(). If not found fallback and lookup through
the regulator_map_list instead.

Also, since the regulator dt nodes can use the same binding to
associate with a parent regulator/supply, allow the drivers to
specify a supply_name, which can then be used to lookup dt
to find the parent phandle.

Signed-off-by: Rajendra Nayak <rnayak at ti.com>
---
 drivers/regulator/core.c         |   91 +++++++++++++++++++++++++++++++------
 include/linux/regulator/driver.h |    2 +
 2 files changed, 78 insertions(+), 15 deletions(-)

diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index d8e6a42..9a5ebbe 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -25,9 +25,11 @@
 #include <linux/mutex.h>
 #include <linux/suspend.h>
 #include <linux/delay.h>
+#include <linux/of.h>
 #include <linux/regulator/consumer.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/regulator.h>
@@ -131,6 +133,33 @@ static struct regulator *get_device_regulator(struct device *dev)
 	return NULL;
 }
 
+/**
+ * of_get_regulator - get a regulator device node based on supply name
+ * @dev: Device pointer for the consumer (of regulator) device
+ * @supply: regulator supply name
+ *
+ * Extract the regulator device node corresponding to the supply name.
+ * retruns the device node corresponding to the regulator if found, else
+ * returns NULL.
+ */
+struct device_node *of_get_regulator(struct device *dev, const char *supply)
+{
+	struct device_node *regnode = NULL;
+	char prop_name[32]; /* 32 is max size of property name */
+
+	dev_dbg(dev, "Looking up %s-supply from device tree\n", supply);
+
+	snprintf(prop_name, 32, "%s-supply", supply);
+	regnode = of_parse_phandle(dev->of_node, prop_name, 0);
+
+	if (!regnode) {
+		pr_warn("%s: %s property in node %s references invalid phandle",
+			__func__, prop_name, dev->of_node->full_name);
+		return NULL;
+	}
+	return regnode;
+}
+
 /* Platform voltage constraint check */
 static int regulator_check_voltage(struct regulator_dev *rdev,
 				   int *min_uV, int *max_uV)
@@ -1155,6 +1184,7 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
 	struct regulator_map *map;
 	struct regulator *regulator = ERR_PTR(-ENODEV);
 	const char *devname = NULL;
+	struct device_node *node;
 	int ret;
 
 	if (id == NULL) {
@@ -1167,6 +1197,23 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
 
 	mutex_lock(&regulator_list_mutex);
 
+	/*
+	 * Lookup happens in 3 ways
+	 * 1. If a dev and dev->of_node exist, look for a
+	 * regulator mapping in dt node.
+	 * 2. Check if a match can be found in regulator_map_list
+	 * if regulator info is still passed in non-dt way
+	 * 3. if !dev, then just look for a matching regulator name.
+	 * Useful for dt builds using regulator_get() without specifying
+	 * a device.
+	 */
+	if (dev && dev->of_node) {
+		node = of_get_regulator(dev, id);
+		if (node)
+			list_for_each_entry(rdev, &regulator_list, list)
+				if (node == rdev->dev.parent->of_node)
+					goto found;
+	}
 	list_for_each_entry(map, &regulator_map_list, list) {
 		/* If the mapping has a device set up it must match */
 		if (map->dev_name &&
@@ -1178,6 +1225,10 @@ static struct regulator *_regulator_get(struct device *dev, const char *id,
 			goto found;
 		}
 	}
+	if (!dev)
+		list_for_each_entry(rdev, &regulator_list, list)
+			if (strcmp(rdev_get_name(rdev), id))
+				goto found;
 
 	if (board_wants_dummy_regulator) {
 		rdev = dummy_regulator_rdev;
@@ -2579,6 +2630,7 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 	static atomic_t regulator_no = ATOMIC_INIT(0);
 	struct regulator_dev *rdev;
 	int ret, i;
+	const char *supply;
 
 	if (regulator_desc == NULL)
 		return ERR_PTR(-EINVAL);
@@ -2653,25 +2705,34 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
 	if (ret < 0)
 		goto scrub;
 
-	if (init_data->supply_regulator) {
-		struct regulator_dev *r;
-		int found = 0;
+	if (init_data->supply_regulator)
+		supply = init_data->supply_regulator;
+	else if (regulator_desc->supply_name);
+		supply = regulator_desc->supply_name;
 
-		list_for_each_entry(r, &regulator_list, list) {
-			if (strcmp(rdev_get_name(r),
-				   init_data->supply_regulator) == 0) {
-				found = 1;
-				break;
-			}
+	if (supply) {
+		struct regulator_dev *r;
+		struct device_node *node;
+
+		/* first do a dt based lookup */
+		if (dev) {
+			node = of_get_regulator(dev, supply);
+			if (node)
+				list_for_each_entry(r, &regulator_list, list)
+					if (node == r->dev.parent->of_node)
+						goto found;
 		}
 
-		if (!found) {
-			dev_err(dev, "Failed to find supply %s\n",
-				init_data->supply_regulator);
-			ret = -ENODEV;
-			goto scrub;
-		}
+		/* next try doing it non-dt way */
+		list_for_each_entry(r, &regulator_list, list)
+			if (strcmp(rdev_get_name(r), supply) == 0)
+				goto found;
 
+		dev_err(dev, "Failed to find supply %s\n", supply);
+		ret = -ENODEV;
+		goto scrub;
+
+found:
 		ret = set_supply(rdev, r);
 		if (ret < 0)
 			goto scrub;
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index 1a80bc7..65ca5ff 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -153,6 +153,7 @@ enum regulator_type {
  * this type.
  *
  * @name: Identifying name for the regulator.
+ * @supply_name: Identifying the regulator supply
  * @id: Numerical identifier for the regulator.
  * @n_voltages: Number of selectors available for ops.list_voltage().
  * @ops: Regulator operations table.
@@ -162,6 +163,7 @@ enum regulator_type {
  */
 struct regulator_desc {
 	const char *name;
+	const char *supply_name;
 	int id;
 	unsigned n_voltages;
 	struct regulator_ops *ops;
-- 
1.7.1




More information about the linux-arm-kernel mailing list