[PATCH v2 4/5] regulator: adapt fixed regulator driver to dt
Grant Likely
grant.likely at secretlab.ca
Thu Oct 13 14:43:19 EDT 2011
On Mon, Oct 10, 2011 at 09:49:37PM +0530, Rajendra Nayak wrote:
> The fixed regulator driver uses of_get_fixed_voltage_config()
> to extract fixed_voltage_config structure contents from device tree.
>
> Also add documenation for additional bindings for fixed
> regulators that can be passed through dt.
>
> Signed-off-by: Rajendra Nayak <rnayak at ti.com>
> ---
> .../bindings/regulator/fixed-regulator.txt | 25 +++++++++
> drivers/regulator/fixed.c | 58 ++++++++++++++++++++
> 2 files changed, 83 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/regulator/fixed-regulator.txt
>
> diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
> new file mode 100644
> index 0000000..049df3d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
> @@ -0,0 +1,25 @@
> +Fixed Voltage regulators
> +
> +Required properties:
> +- compatible: Must be "regulator-fixed";
> +
> +Optional properties:
> +- regulator-fixed-supply: Name of the regulator supply
> +- regulator-fixed-microvolts: Output voltage of regulator
> +- regulator-fixed-gpio: gpio to use for enable control
> +- regulator-fixed-startup-delay: startup time in microseconds
> +- regulator-fixed-enable-high: Polarity of enable GPIO,
> + 1 = Active High, 0 = Active low
> +- regulator-fixed-enabled-at-boot: 1 = yes, 0 = no
> +
> +Example:
> +
> + abc: fixedregulator at 0 {
> + compatible = "regulator-fixed";
> + regulator-fixed-supply = "fixed-supply";
> + regulator-fixed-microvolts = <1800000>;
> + regulator-fixed-gpio = <43>;
> + regulator-fixed-startup-delay = <70000>;
> + regulator-fixed-enable-high;
> + regulator-fixed-enabled-at-boot;
> + };
> diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
> index 2fe9d99..eb37eb6 100644
> --- a/drivers/regulator/fixed.c
> +++ b/drivers/regulator/fixed.c
> @@ -23,9 +23,12 @@
> #include <linux/platform_device.h>
> #include <linux/regulator/driver.h>
> #include <linux/regulator/fixed.h>
> +#include <linux/regulator/machine.h>
> #include <linux/gpio.h>
> #include <linux/delay.h>
> #include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/regulator/of_regulator.h>
>
> struct fixed_voltage_data {
> struct regulator_desc desc;
> @@ -37,6 +40,47 @@ struct fixed_voltage_data {
> bool is_enabled;
> };
>
> +
> +/**
> + * of_get_fixed_voltage_config - extract fixed_voltage_config structure info
> + * @dev: device requesting for fixed_voltage_config
> + *
> + * Populates fixed_voltage_config structure by extracting data from device
> + * tree node, returns a pointer to the populated structure of NULL if memory
> + * alloc fails.
> + */
> +struct fixed_voltage_config *of_get_fixed_voltage_config(struct device *dev)
> +{
> + struct fixed_voltage_config *config;
> + struct device_node *np = dev->of_node;
> + const __be32 *microvolts, *gpio, *delay;
> +
> + config = devm_kzalloc(dev, sizeof(struct fixed_voltage_config), GFP_KERNEL);
> + if (!config)
> + return NULL;
> +
> + config->supply_name = (char *)of_get_property(np,
> + "regulator-fixed-supply", NULL);
of_get_property() returns a (const void *). Casting drops the const
and should not be used. Either make supply_name a (const char *), or
copy the string into a (char *) buffer.
> + microvolts = of_get_property(np, "regulator-fixed-microvolts", NULL);
> + if (microvolts)
> + config->microvolts = be32_to_cpu(*microvolts);
> + gpio = of_get_property(np, "regulator-fixed-gpio", NULL);
> + if (gpio)
> + config->gpio = be32_to_cpu(*gpio);
of_property_read_u32() may help here.
> + delay = of_get_property(np, "regulator-fixed-startup-delay", NULL);
> + if (delay)
> + config->startup_delay = be32_to_cpu(*delay);
> +
> + if (of_find_property(np, "regulator-fixed-enable-high", NULL))
> + config->enable_high = true;
> + if (of_find_property(np, "regulator-fixed-enabled-at-boot", NULL))
> + config->enabled_at_boot = true;
> +
> + config->init_data = of_get_regulator_init_data(dev);
> +
> + return config;
> +}
> +
> static int fixed_voltage_is_enabled(struct regulator_dev *dev)
> {
> struct fixed_voltage_data *data = rdev_get_drvdata(dev);
> @@ -108,6 +152,9 @@ static int __devinit reg_fixed_voltage_probe(struct platform_device *pdev)
> struct fixed_voltage_data *drvdata;
> int ret;
>
> + if (pdev->dev.of_node)
> + config = of_get_fixed_voltage_config(&pdev->dev);
> +
> drvdata = kzalloc(sizeof(struct fixed_voltage_data), GFP_KERNEL);
> if (drvdata == NULL) {
> dev_err(&pdev->dev, "Failed to allocate device data\n");
> @@ -216,12 +263,23 @@ static int __devexit reg_fixed_voltage_remove(struct platform_device *pdev)
> return 0;
> }
>
> +#if defined(CONFIG_OF)
> +static const struct of_device_id fixed_of_match[] __devinitconst = {
> + { .compatible = "regulator-fixed", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, fixed_of_match);
> +#else
> +#define fixed_of_match NULL
> +#endif
> +
> static struct platform_driver regulator_fixed_voltage_driver = {
> .probe = reg_fixed_voltage_probe,
> .remove = __devexit_p(reg_fixed_voltage_remove),
> .driver = {
> .name = "reg-fixed-voltage",
> .owner = THIS_MODULE,
> + .of_match_table = fixed_of_match,
> },
> };
>
> --
> 1.7.1
>
More information about the linux-arm-kernel
mailing list