[PATCH 23/30] ARM: omap2: select twl4030 support on boards that need it

[Tony Lindgren]

* Arnd Bergmann <arnd at arndb.de> [111002 07:13]:
> These three boards unconditionally use the twl4030 driver
> from the board-zoom-display.c file. Make sure that the driver
> is always there.
> We also need to select the I2C core so we are able to build
> that driver.
> 
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>

Acked-by: Tony Lindgren <tony at atomide.com>

> ---
>  arch/arm/mach-omap2/Kconfig |    6 ++++++
>  1 files changed, 6 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 57b66d5..4deeade 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -253,6 +253,8 @@ config MACH_OMAP_ZOOM2
>  	select SERIAL_CORE_CONSOLE
>  	select SERIAL_8250_CONSOLE
>  	select REGULATOR_FIXED_VOLTAGE
> +	select TWL4030_CORE
> +	select I2C
>  
>  config MACH_OMAP_ZOOM3
>  	bool "OMAP3630 Zoom3 board"
> @@ -263,6 +265,8 @@ config MACH_OMAP_ZOOM3
>  	select SERIAL_CORE_CONSOLE
>  	select SERIAL_8250_CONSOLE
>  	select REGULATOR_FIXED_VOLTAGE
> +	select TWL4030_CORE
> +	select I2C
>  
>  config MACH_CM_T35
>  	bool "CompuLab CM-T35/CM-T3730 modules"
> @@ -304,6 +308,8 @@ config MACH_OMAP_3630SDP
>  	depends on ARCH_OMAP3
>  	default y
>  	select OMAP_PACKAGE_CBP
> +	select TWL4030_CORE
> +	select I2C
>  
>  config MACH_TI8168EVM
>  	bool "TI8168 Evaluation Module"
> -- 
> 1.7.5.4
>