[PATCH V3 2/2] ARM: at91: add at91sam9g20 and Calao USB A9G20 DT support
Nicolas Ferre
nicolas.ferre at atmel.com
Mon Oct 24 10:05:01 EDT 2011
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre at atmel.com>
---
arch/arm/boot/dts/at91sam9g20.dtsi | 119 ++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/usb_a9g20.dts | 30 +++++++++
arch/arm/mach-at91/Makefile.boot | 2 +-
arch/arm/mach-at91/at91sam9260.c | 8 +++
arch/arm/mach-at91/board-dt.c | 1 +
5 files changed, 159 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/boot/dts/at91sam9g20.dtsi
create mode 100644 arch/arm/boot/dts/usb_a9g20.dts
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
new file mode 100644
index 0000000..aeef042
--- /dev/null
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -0,0 +1,119 @@
+/*
+ * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
+ *
+ * Copyright (C) 2011 Atmel,
+ * 2011 Nicolas Ferre <nicolas.ferre at atmel.com>,
+ * 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ model = "Atmel AT91SAM9G20 family SoC";
+ compatible = "atmel,at91sam9g20";
+ interrupt-parent = <&aic>;
+
+ aliases {
+ serial0 = &dbgu;
+ serial1 = &usart0;
+ serial2 = &usart1;
+ serial3 = &usart2;
+ serial4 = &usart3;
+ serial5 = &usart4;
+ serial6 = &usart5;
+ };
+ cpus {
+ cpu at 0 {
+ compatible = "arm,arm926ejs";
+ };
+ };
+
+ memory at 20000000 {
+ reg = <0x20000000 0x08000000>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ apb {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ aic: interrupt-controller at fffff000 {
+ #interrupt-cells = <1>;
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ interrupt-parent;
+ reg = <0xfffff000 0x200>;
+ };
+
+ dbgu: serial at fffff200 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffff200 0x200>;
+ interrupts = <1>;
+ status = "disabled";
+ };
+
+ usart0: serial at fffb0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb0000 0x200>;
+ interrupts = <6>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart1: serial at fffb4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb4000 0x200>;
+ interrupts = <7>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart2: serial at fffb8000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffb8000 0x200>;
+ interrupts = <8>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart3: serial at fffd0000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd0000 0x200>;
+ interrupts = <23>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart4: serial at fffd4000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd4000 0x200>;
+ interrupts = <24>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+
+ usart5: serial at fffd8000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfffd8000 0x200>;
+ interrupts = <25>;
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ status = "disabled";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
new file mode 100644
index 0000000..a060f6c
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -0,0 +1,30 @@
+/*
+ * usb_a9g20.dts - Device Tree file for Caloa USB A9G20 board
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g20.dtsi"
+
+/ {
+ model = "Calao USB A9G20";
+ compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
+
+ chosen {
+ bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox)ro,128k(bareboxenv),128k(bareboxenv2),4M(kernel),120M(rootfs),-(data) root=/dev/mtdblock5 rw rootfstype=ubifs";
+ };
+
+ memory at 70000000 {
+ reg = <0x20000000 0x4000000>;
+ };
+
+ ahb {
+ apb {
+ dbgu: serial at fffff200 {
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot
index d278863..08c665a 100644
--- a/arch/arm/mach-at91/Makefile.boot
+++ b/arch/arm/mach-at91/Makefile.boot
@@ -17,4 +17,4 @@ params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
endif
-dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
+dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb usb_a9g20.dtb
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index cb397be..f4518b4 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -199,6 +199,14 @@ static struct clk_lookup periph_clocks_lookups[] = {
CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk),
CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
+ /* more usart lookup table for DT entries */
+ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
+ CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffb4000.serial", &usart1_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffb8000.serial", &usart2_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk),
+ CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk),
};
static struct clk_lookup usart_clocks_lookups[] = {
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index 77fe466..a3d22f8 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -108,6 +108,7 @@ static void __init at91_dt_device_init(void)
static const char *at91_dt_board_compat[] __initdata = {
"atmel,at91sam9m10g45ek",
+ "calao,usb-a9g20",
NULL
};
--
1.7.5.4
More information about the linux-arm-kernel
mailing list