[PATCH v5 09/11] ARM: pxa: change gpio to platform device
Haojian Zhuang
haojian.zhuang at marvell.com
Mon Oct 17 09:35:15 EDT 2011
Remove most gpio macros and change gpio driver to platform driver.
Signed-off-by: Haojian Zhuang <haojian.zhuang at marvell.com>
---
arch/arm/Kconfig | 2 +
arch/arm/mach-mmp/aspenite.c | 1 +
arch/arm/mach-mmp/avengers_lite.c | 1 +
arch/arm/mach-mmp/brownstone.c | 1 +
arch/arm/mach-mmp/flint.c | 1 +
arch/arm/mach-mmp/gplugd.c | 1 +
arch/arm/mach-mmp/include/mach/gpio-pxa.h | 29 ------
arch/arm/mach-mmp/include/mach/gpio.h | 3 +-
arch/arm/mach-mmp/include/mach/mmp2.h | 2 +
arch/arm/mach-mmp/include/mach/pxa168.h | 2 +
arch/arm/mach-mmp/include/mach/pxa910.h | 2 +
arch/arm/mach-mmp/mmp2.c | 28 ++++--
arch/arm/mach-mmp/pxa168.c | 29 ++++--
arch/arm/mach-mmp/pxa910.c | 29 ++++--
arch/arm/mach-mmp/tavorevb.c | 1 +
arch/arm/mach-mmp/teton_bga.c | 1 +
arch/arm/mach-mmp/ttc_dkb.c | 1 +
arch/arm/mach-pxa/devices.c | 30 ++++++
arch/arm/mach-pxa/devices.h | 1 +
arch/arm/mach-pxa/include/mach/gpio-pxa.h | 131 ---------------------------
arch/arm/mach-pxa/include/mach/gpio.h | 5 +-
arch/arm/mach-pxa/include/mach/idp.h | 2 -
arch/arm/mach-pxa/include/mach/littleton.h | 2 -
arch/arm/mach-pxa/irq.c | 3 +-
arch/arm/mach-pxa/mfp-pxa2xx.c | 6 +-
arch/arm/mach-pxa/pxa25x.c | 3 +-
arch/arm/mach-pxa/pxa27x.c | 3 +-
arch/arm/mach-pxa/pxa3xx.c | 6 +-
arch/arm/mach-pxa/pxa95x.c | 3 +-
arch/arm/plat-pxa/include/plat/gpio-pxa.h | 45 ---------
drivers/gpio/Kconfig | 6 ++
drivers/gpio/Makefile | 2 +-
drivers/gpio/gpio-pxa.c | 136 ++++++++++++++++++++++++++--
include/linux/gpio-pxa.h | 16 ++++
34 files changed, 272 insertions(+), 262 deletions(-)
delete mode 100644 arch/arm/mach-mmp/include/mach/gpio-pxa.h
delete mode 100644 arch/arm/mach-pxa/include/mach/gpio-pxa.h
delete mode 100644 arch/arm/plat-pxa/include/plat/gpio-pxa.h
create mode 100644 include/linux/gpio-pxa.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c704bd7..8b54401 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -556,6 +556,7 @@ config ARCH_MMP
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
+ select GPIO_PXA
select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select PLAT_PXA
@@ -627,6 +628,7 @@ config ARCH_PXA
select CLKSRC_MMIO
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
+ select GPIO_PXA
select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select PLAT_PXA
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index fb7dfc1..edcbada 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -231,6 +231,7 @@ static void __init common_init(void)
pxa168_add_nand(&aspenite_nand_info);
pxa168_add_fb(&aspenite_lcd_info);
pxa168_add_keypad(&aspenite_keypad_info);
+ platform_device_register(&pxa168_device_gpio);
/* off-chip devices */
platform_device_register(&smc91x_device);
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
index 39f0878..c5d53e0 100644
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -38,6 +38,7 @@ static void __init avengers_lite_init(void)
/* on-chip devices */
pxa168_add_uart(2);
+ platform_device_register(&pxa168_device_gpio);
}
MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index e411252..1e8c6ee 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -196,6 +196,7 @@ static void __init brownstone_init(void)
mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
+ platform_device_register(&mmp2_device_gpio);
/* enable 5v regulator */
platform_device_register(&brownstone_v_5vp_device);
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index a64c172..c1f0aa8 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -110,6 +110,7 @@ static void __init flint_init(void)
/* on-chip devices */
mmp2_add_uart(1);
mmp2_add_uart(2);
+ platform_device_register(&mmp2_device_gpio);
/* off-chip devices */
platform_device_register(&smc91x_device);
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 32776f3..5315fcc 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -184,6 +184,7 @@ static void __init gplugd_init(void)
pxa168_add_uart(3);
pxa168_add_ssp(0);
pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
+ platform_device_register(&pxa168_device_gpio);
pxa168_add_eth(&gplugd_eth_platform_data);
}
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
deleted file mode 100644
index 78199bd..0000000
--- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ /dev/null
@@ -1,29 +0,0 @@
-#ifndef __ASM_MACH_GPIO_PXA_H
-#define __ASM_MACH_GPIO_PXA_H
-
-#include <mach/addr-map.h>
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-
-#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
-
-/* NOTE: these macros are defined here to make optimization of
- * gpio_{get,set}_value() to work when 'gpio' is a constant.
- * Usage of these macros otherwise is no longer recommended,
- * use generic GPIO API whenever possible.
- */
-#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
-
-#include <plat/gpio-pxa.h>
-
-#endif /* __ASM_MACH_GPIO_PXA_H */
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
index 904466d..13219eb 100644
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -3,7 +3,6 @@
#include <asm-generic/gpio.h>
-#define __gpio_is_inverted(gpio) (0)
-#define __gpio_is_occupied(gpio) (0)
+#include <mach/cputype.h>
#endif /* __ASM_MACH_GPIO_H */
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index de7b888..c4c9046 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -29,6 +29,8 @@ extern struct pxa_device_desc mmp2_device_sdh1;
extern struct pxa_device_desc mmp2_device_sdh2;
extern struct pxa_device_desc mmp2_device_sdh3;
+extern struct platform_device mmp2_device_gpio;
+
static inline int mmp2_add_uart(int id)
{
struct pxa_device_desc *d = NULL;
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 7f00584..dfd6b37 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -35,6 +35,8 @@ extern struct pxa_device_desc pxa168_device_fb;
extern struct pxa_device_desc pxa168_device_keypad;
extern struct pxa_device_desc pxa168_device_eth;
+extern struct platform_device pxa168_device_gpio;
+
static inline int pxa168_add_uart(int id)
{
struct pxa_device_desc *d = NULL;
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 91be755..4de13ab 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -21,6 +21,8 @@ extern struct pxa_device_desc pxa910_device_pwm3;
extern struct pxa_device_desc pxa910_device_pwm4;
extern struct pxa_device_desc pxa910_device_nand;
+extern struct platform_device pxa910_device_gpio;
+
static inline int pxa910_add_uart(int id)
{
struct pxa_device_desc *d = NULL;
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 65d8689e..debde08 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <asm/hardware/cache-tauros2.h>
@@ -24,7 +25,6 @@
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/mfp.h>
-#include <mach/gpio-pxa.h>
#include <mach/devices.h>
#include <mach/mmp2.h>
@@ -33,8 +33,6 @@
#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
-#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c)
-
static struct mfp_addr_map mmp2_addr_map[] __initdata = {
MFP_ADDR_X(GPIO0, GPIO58, 0x54),
@@ -100,12 +98,6 @@ static void __init mmp2_init_gpio(void)
/* enable GPIO clock */
__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO);
-
- /* unmask GPIO edge detection for all 6 banks -- APMASKx */
- for (i = 0; i < 6; i++)
- __raw_writel(0xffffffff, APMASK(i));
-
- pxa_init_gpio(IRQ_MMP2_GPIO, 0, 167, NULL);
}
void __init mmp2_init_irq(void)
@@ -226,3 +218,21 @@ MMP2_DEVICE(sdh1, "sdhci-pxav3", 1, MMC2, 0xd4280800, 0x120);
MMP2_DEVICE(sdh2, "sdhci-pxav3", 2, MMC3, 0xd4281000, 0x120);
MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120);
+struct resource mmp2_resource_gpio[] = {
+ {
+ .start = 0xd4019000,
+ .end = 0xd4019fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_MMP2_GPIO,
+ .end = IRQ_MMP2_GPIO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mmp2_device_gpio = {
+ .name = "pxa-gpio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mmp2_resource_gpio),
+ .resource = mmp2_resource_gpio,
+};
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 50c1763..602ec0a 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -13,6 +13,7 @@
#include <linux/list.h>
#include <linux/io.h>
#include <linux/clk.h>
+#include <linux/platform_device.h>
#include <asm/mach/time.h>
#include <mach/addr-map.h>
@@ -20,7 +21,6 @@
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/irqs.h>
-#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/devices.h>
#include <mach/mfp.h>
@@ -40,20 +40,12 @@ static struct mfp_addr_map pxa168_mfp_addr_map[] __initdata =
MFP_ADDR_END,
};
-#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
-
static void __init pxa168_init_gpio(void)
{
int i;
/* enable GPIO clock */
__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA168_GPIO);
-
- /* unmask GPIO edge detection for all 4 banks - APMASKx */
- for (i = 0; i < 4; i++)
- __raw_writel(0xffffffff, APMASK(i));
-
- pxa_init_gpio(IRQ_PXA168_GPIOX, 0, 127, NULL);
}
void __init pxa168_init_irq(void)
@@ -168,3 +160,22 @@ PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61);
PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8);
PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
+
+struct resource pxa168_resource_gpio[] = {
+ {
+ .start = 0xd4019000,
+ .end = 0xd4019fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PXA168_GPIOX,
+ .end = IRQ_PXA168_GPIOX,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa168_device_gpio = {
+ .name = "pxa-gpio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa168_resource_gpio),
+ .resource = pxa168_resource_gpio,
+};
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 4ebbfbb..7b992ce 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <asm/mach/time.h>
#include <mach/addr-map.h>
@@ -19,7 +20,6 @@
#include <mach/regs-apmu.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
-#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/mfp.h>
#include <mach/devices.h>
@@ -77,20 +77,12 @@ static struct mfp_addr_map pxa910_mfp_addr_map[] __initdata =
MFP_ADDR_END,
};
-#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
-
static void __init pxa910_init_gpio(void)
{
int i;
/* enable GPIO clock */
__raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA910_GPIO);
-
- /* unmask GPIO edge detection for all 4 banks - APMASKx */
- for (i = 0; i < 4; i++)
- __raw_writel(0xffffffff, APMASK(i));
-
- pxa_init_gpio(IRQ_PXA910_AP_GPIO, 0, 127, NULL);
}
void __init pxa910_init_irq(void)
@@ -179,3 +171,22 @@ PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
+
+struct resource pxa910_resource_gpio[] = {
+ {
+ .start = 0xd4019000,
+ .end = 0xd4019fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PXA910_AP_GPIO,
+ .end = IRQ_PXA910_AP_GPIO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa910_device_gpio = {
+ .name = "pxa-gpio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa910_resource_gpio),
+ .resource = pxa910_resource_gpio,
+};
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index 331f5f3..bb2ddb7 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -94,6 +94,7 @@ static void __init tavorevb_init(void)
/* on-chip devices */
pxa910_add_uart(1);
+ platform_device_register(&pxa910_device_gpio);
/* off-chip devices */
platform_device_register(&smc91x_device);
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
index 825a01c..703de85 100644
--- a/arch/arm/mach-mmp/teton_bga.c
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -78,6 +78,7 @@ static void __init teton_bga_init(void)
pxa168_add_uart(1);
pxa168_add_keypad(&teton_bga_keypad_info);
pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info));
+ platform_device_register(&pxa168_device_gpio);
}
MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index fac0d5d..a80ed26 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -123,6 +123,7 @@ static struct platform_device ttc_dkb_device_onenand = {
};
static struct platform_device *ttc_dkb_devices[] = {
+ &pxa910_device_gpio,
&ttc_dkb_device_onenand,
};
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 2e04254..5bc1312 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -1051,6 +1051,36 @@ struct platform_device pxa3xx_device_ssp4 = {
};
#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
+struct resource pxa_resource_gpio[] = {
+ {
+ .start = 0x40e00000,
+ .end = 0x40e0ffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_GPIO0,
+ .end = IRQ_GPIO0,
+ .name = "gpio0",
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = IRQ_GPIO1,
+ .end = IRQ_GPIO1,
+ .name = "gpio1",
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = IRQ_GPIO_2_x,
+ .end = IRQ_GPIO_2_x,
+ .name = "gpio_mux",
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa_device_gpio = {
+ .name = "pxa-gpio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa_resource_gpio),
+ .resource = pxa_resource_gpio,
+};
+
/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
* See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 2fd5a8b..1475db1 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -16,6 +16,7 @@ extern struct platform_device pxa_device_ficp;
extern struct platform_device sa1100_device_rtc;
extern struct platform_device pxa_device_rtc;
extern struct platform_device pxa_device_ac97;
+extern struct platform_device pxa_device_gpio;
extern struct platform_device pxa27x_device_i2c_power;
extern struct platform_device pxa27x_device_ohci;
diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
deleted file mode 100644
index 134b3bc..0000000
--- a/arch/arm/mach-pxa/include/mach/gpio-pxa.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Written by Philipp Zabel <philipp.zabel at gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef __MACH_PXA_GPIO_PXA_H
-#define __MACH_PXA_GPIO_PXA_H
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-
-#define GPIO_REGS_VIRT io_p2v(0x40E00000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-/* GPIO Pin Level Registers */
-#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
-#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
-#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
-#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
-
-/* GPIO Pin Direction Registers */
-#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
-#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
-#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
-#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
-
-/* GPIO Pin Output Set Registers */
-#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
-#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
-#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
-#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
-
-/* GPIO Pin Output Clear Registers */
-#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
-#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
-#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
-#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
-
-/* GPIO Rising Edge Detect Registers */
-#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
-#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
-#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
-#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
-
-/* GPIO Falling Edge Detect Registers */
-#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
-#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
-#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
-#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
-
-/* GPIO Edge Detect Status Registers */
-#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
-#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
-#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
-#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
-
-/* GPIO Alternate Function Select Registers */
-#define GAFR0_L GPIO_REG(0x0054)
-#define GAFR0_U GPIO_REG(0x0058)
-#define GAFR1_L GPIO_REG(0x005C)
-#define GAFR1_U GPIO_REG(0x0060)
-#define GAFR2_L GPIO_REG(0x0064)
-#define GAFR2_U GPIO_REG(0x0068)
-#define GAFR3_L GPIO_REG(0x006C)
-#define GAFR3_U GPIO_REG(0x0070)
-
-/* More handy macros. The argument is a literal GPIO number. */
-
-#define GPIO_bit(x) (1 << ((x) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
-#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
-#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
-#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
-#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
-
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
-
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
- * as well as their Alternate Function value being '1' for GPIO in GAFRx.
- */
-static inline int __gpio_is_inverted(unsigned gpio)
-{
- return cpu_is_pxa25x() && gpio > 85;
-}
-#else
-static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
-#endif
-
-/*
- * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
- * function of a GPIO, and GPDRx cannot be altered once configured. It
- * is attributed as "occupied" here (I know this terminology isn't
- * accurate, you are welcome to propose a better one :-)
- */
-static inline int __gpio_is_occupied(unsigned gpio)
-{
- if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
- int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
- int dir = GPDR(gpio) & GPIO_bit(gpio);
-
- if (__gpio_is_inverted(gpio))
- return af != 1 || dir == 0;
- else
- return af != 0 || dir != 0;
- } else
- return GPDR(gpio) & GPIO_bit(gpio);
-}
-
-#include <plat/gpio-pxa.h>
-#endif /* __MACH_PXA_GPIO_PXA_H */
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 561cdbf..0248e43 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -25,7 +25,8 @@
#define __ASM_ARCH_PXA_GPIO_H
#include <asm-generic/gpio.h>
-/* The defines for the driver are needed for the accelerated accessors */
-#include "gpio-pxa.h"
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
#endif
diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h
index a7f912f..22a96f8 100644
--- a/arch/arm/mach-pxa/include/mach/idp.h
+++ b/arch/arm/mach-pxa/include/mach/idp.h
@@ -131,8 +131,6 @@
#define PCC_VS2 (1 << 1)
#define PCC_VS1 (1 << 0)
-#define PCC_DETECT(x) (GPLR(7 + (x)) & GPIO_bit(7 + (x)))
-
/* A listing of interrupts used by external hardware devices */
#define TOUCH_PANEL_IRQ PXA_GPIO_TO_IRQ(5)
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index e20ac1b..8066be5 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -1,8 +1,6 @@
#ifndef __ASM_ARCH_LITTLETON_H
#define __ASM_ARCH_LITTLETON_H
-#include <mach/gpio-pxa.h>
-
#define LITTLETON_ETH_PHYS 0x30000000
#define LITTLETON_GPIO_LCD_CS (17)
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 0decac8..6a737aa 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -22,7 +22,6 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/gpio-pxa.h>
#include "generic.h"
@@ -122,7 +121,7 @@ asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs)
} while (1);
}
-void __init pxa_init_irq(int irq_nr, set_wake_t fn)
+void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int))
{
int irq, i, n;
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 43a5f68..f147755 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -13,6 +13,7 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -20,7 +21,6 @@
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa2xx.h>
-#include <mach/gpio-pxa.h>
#include "generic.h"
@@ -29,6 +29,10 @@
#define GAFR_L(x) __GAFR(0, x)
#define GAFR_U(x) __GAFR(1, x)
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPLR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5))
+#define GPDR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c)
+
#define PWER_WE35 (1 << 24)
struct gpio_desc {
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index d4fca6a..4718adf 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -17,6 +17,7 @@
* need be.
*/
#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -312,14 +313,12 @@ set_pwer:
void __init pxa25x_init_irq(void)
{
pxa_init_irq(32, pxa25x_set_wake);
- pxa_init_gpio(IRQ_GPIO_2_x, 2, 84, pxa25x_set_wake);
}
#ifdef CONFIG_CPU_PXA26x
void __init pxa26x_init_irq(void)
{
pxa_init_irq(32, pxa25x_set_wake);
- pxa_init_gpio(IRQ_GPIO_2_x, 2, 89, pxa25x_set_wake);
}
#endif
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 08eb452..80abe4c 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -386,7 +387,6 @@ static int pxa27x_set_wake(struct irq_data *d, unsigned int on)
void __init pxa27x_init_irq(void)
{
pxa_init_irq(34, pxa27x_set_wake);
- pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake);
}
static struct map_desc pxa27x_io_desc[] __initdata = {
@@ -422,6 +422,7 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
}
static struct platform_device *devices[] __initdata = {
+ &pxa_device_gpio,
&pxa27x_device_udc,
&pxa_device_pmu,
&pxa_device_i2s,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index f940a13..4446d56 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -25,7 +25,6 @@
#include <asm/mach/map.h>
#include <asm/suspend.h>
#include <mach/hardware.h>
-#include <mach/gpio-pxa.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
#include <mach/ohci.h>
@@ -365,7 +364,8 @@ static struct irq_chip pxa_ext_wakeup_chip = {
.irq_set_type = pxa_set_ext_wakeup_type,
};
-static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
+static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *,
+ unsigned int))
{
int irq;
@@ -388,7 +388,6 @@ void __init pxa3xx_init_irq(void)
pxa_init_irq(56, pxa3xx_set_wake);
pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
- pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
}
static struct map_desc pxa3xx_io_desc[] __initdata = {
@@ -417,6 +416,7 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
}
static struct platform_device *devices[] __initdata = {
+ &pxa_device_gpio,
&pxa27x_device_udc,
&pxa_device_pmu,
&pxa_device_i2s,
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index 51371b3..0961093 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -20,7 +20,6 @@
#include <linux/syscore_ops.h>
#include <mach/hardware.h>
-#include <mach/gpio-pxa.h>
#include <mach/pxa3xx-regs.h>
#include <mach/pxa930.h>
#include <mach/reset.h>
@@ -235,7 +234,6 @@ static struct clk_lookup pxa95x_clkregs[] = {
void __init pxa95x_init_irq(void)
{
pxa_init_irq(96, NULL);
- pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
}
/*
@@ -248,6 +246,7 @@ void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
}
static struct platform_device *devices[] __initdata = {
+ &pxa_device_gpio,
&sa1100_device_rtc,
&pxa_device_rtc,
&pxa27x_device_ssp1,
diff --git a/arch/arm/plat-pxa/include/plat/gpio-pxa.h b/arch/arm/plat-pxa/include/plat/gpio-pxa.h
deleted file mode 100644
index 15bf9be..0000000
--- a/arch/arm/plat-pxa/include/plat/gpio-pxa.h
+++ /dev/null
@@ -1,45 +0,0 @@
-#ifndef __PLAT_PXA_GPIO_H
-#define __PLAT_PXA_GPIO_H
-
-struct irq_data;
-
-/*
- * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
- * one set of registers. The register offsets are organized below:
- *
- * GPLR GPDR GPSR GPCR GRER GFER GEDR
- * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
- * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
- * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
- *
- * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
- * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
- * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
- *
- * NOTE:
- * BANK 3 is only available on PXA27x and later processors.
- * BANK 4 and 5 are only available on PXA935
- */
-
-#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
-
-#define GPLR_OFFSET 0x00
-#define GPDR_OFFSET 0x0C
-#define GPSR_OFFSET 0x18
-#define GPCR_OFFSET 0x24
-#define GRER_OFFSET 0x30
-#define GFER_OFFSET 0x3C
-#define GEDR_OFFSET 0x48
-
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space, the
- * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
- */
-extern int pxa_last_gpio;
-
-typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
-
-extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
-extern int pxa_irq_to_gpio(int irq);
-
-#endif /* __PLAT_PXA_GPIO_H */
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 4caa3d3..bafffc9 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -149,6 +149,12 @@ config GPIO_PL061
help
Say yes here to support the PrimeCell PL061 GPIO device
+config GPIO_PXA
+ bool "PXA GPIO support"
+ depends on ARCH_PXA || ARCH_MMP
+ help
+ Say yes here to support the PXA GPIO device
+
config GPIO_XILINX
bool "Xilinx GPIO support"
depends on PPC_OF || MICROBLAZE
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 19c5d27..56e4f1e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -40,7 +40,7 @@ obj-$(CONFIG_GPIO_PCA953X) += gpio-pca953x.o
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
-obj-$(CONFIG_PLAT_PXA) += gpio-pxa.o
+obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index 673caf9..0d261eb 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -12,13 +12,42 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
#include <linux/slab.h>
-#include <mach/gpio-pxa.h>
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ * GPLR GPDR GPSR GPCR GRER GFER GEDR
+ * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
+ * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
+ * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
+ *
+ * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
+ * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
+ * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
+ *
+ * NOTE:
+ * BANK 3 is only available on PXA27x and later processors.
+ * BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPLR_OFFSET 0x00
+#define GPDR_OFFSET 0x0C
+#define GPSR_OFFSET 0x18
+#define GPCR_OFFSET 0x24
+#define GRER_OFFSET 0x30
+#define GFER_OFFSET 0x3C
+#define GEDR_OFFSET 0x48
+#define GAFR_OFFSET 0x54
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
int pxa_last_gpio;
@@ -52,6 +81,7 @@ enum {
static DEFINE_SPINLOCK(gpio_lock);
static struct pxa_gpio_chip *pxa_gpio_chips;
static int gpio_type;
+static void __iomem *gpio_reg_base;
#define for_each_gpio_chip(i, c) \
for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
@@ -76,6 +106,53 @@ static inline int gpio_is_mmp_type(int type)
return (type & MMP_GPIO) != 0;
}
+/* GPIO86/87/88/89 on PXA26x have their direction bits in PXA_GPDR(2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(int gpio)
+{
+ if ((gpio_type == PXA26X_GPIO) && (gpio > 85))
+ return 1;
+ return 0;
+}
+
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(unsigned gpio)
+{
+ struct pxa_gpio_chip *pxachip;
+ void __iomem *base;
+ unsigned long gafr = 0, gpdr = 0;
+ int ret, af = 0, dir = 0;
+
+ pxachip = gpio_to_pxachip(gpio);
+ base = gpio_chip_base(&pxachip->chip);
+ gpdr = readl_relaxed(base + GPDR_OFFSET);
+
+ switch (gpio_type) {
+ case PXA25X_GPIO:
+ case PXA26X_GPIO:
+ case PXA27X_GPIO:
+ gafr = readl_relaxed(base + GAFR_OFFSET);
+ af = (gafr >> ((gpio & 0xf) * 2)) & 0x3;
+ dir = gpdr & GPIO_bit(gpio);
+
+ if (__gpio_is_inverted(gpio))
+ ret = (af != 1) || (dir == 0);
+ else
+ ret = (af != 0) || (dir != 0);
+ break;
+ default:
+ ret = gpdr & GPIO_bit(gpio);
+ break;
+ }
+ return ret;
+}
+
#ifdef CONFIG_ARCH_PXA
static inline int __pxa_gpio_to_irq(int gpio)
{
@@ -187,7 +264,7 @@ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
(value ? GPSR_OFFSET : GPCR_OFFSET));
}
-static int __init pxa_init_gpio_chip(int gpio_end)
+static int __devinit pxa_init_gpio_chip(int gpio_end)
{
int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
struct pxa_gpio_chip *chips;
@@ -202,7 +279,7 @@ static int __init pxa_init_gpio_chip(int gpio_end)
struct gpio_chip *c = &chips[i].chip;
sprintf(chips[i].label, "gpio-%d", i);
- chips[i].regbase = (void __iomem *)GPIO_BANK(i);
+ chips[i].regbase = gpio_reg_base + BANK_OFF(i);
c->base = gpio;
c->label = chips[i].label;
@@ -384,17 +461,35 @@ static int pxa_gpio_nums(void)
return count;
}
-void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
+static int __devinit pxa_gpio_probe(struct platform_device *pdev)
{
struct pxa_gpio_chip *c;
+ struct resource *res;
int gpio, irq;
+ int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0;
pxa_last_gpio = pxa_gpio_nums();
if (!pxa_last_gpio)
- return;
+ return -EINVAL;
+
+ irq0 = platform_get_irq_byname(pdev, "gpio0");
+ irq1 = platform_get_irq_byname(pdev, "gpio1");
+ irq_mux = platform_get_irq_byname(pdev, "gpio_mux");
+ if ((irq0 > 0 && irq1 <= 0) || (irq0 <= 0 && irq1 > 0)
+ || (irq_mux <= 0))
+ return -EINVAL;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+ gpio_reg_base = ioremap(res->start, resource_size(res));
+ if (!gpio_reg_base)
+ return -EINVAL;
+
+ if (irq0 > 0)
+ gpio_offset = 2;
/* Initialize GPIO chips */
- pxa_init_gpio_chip(end);
+ pxa_init_gpio_chip(pxa_last_gpio);
/* clear all GPIO edge detects */
for_each_gpio_chip(gpio, c) {
@@ -417,16 +512,30 @@ void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
irq_set_chained_handler(IRQ_GPIO1, pxa_gpio_demux_handler);
#endif
- for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
+ for (irq = gpio_to_irq(gpio_offset);
+ irq <= gpio_to_irq(pxa_last_gpio); irq++) {
irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
- /* Install handler for GPIO>=2 edge detect interrupts */
- irq_set_chained_handler(mux_irq, pxa_gpio_demux_handler);
- pxa_muxed_gpio_chip.irq_set_wake = fn;
+ irq_set_chained_handler(irq_mux, pxa_gpio_demux_handler);
+ return 0;
+}
+
+static struct platform_driver pxa_gpio_driver = {
+ .probe = pxa_gpio_probe,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "pxa-gpio",
+ },
+};
+
+static int __init pxa_gpio_init(void)
+{
+ return platform_driver_register(&pxa_gpio_driver);
}
+postcore_initcall(pxa_gpio_init);
#ifdef CONFIG_PM
static int pxa_gpio_suspend(void)
@@ -470,3 +579,10 @@ struct syscore_ops pxa_gpio_syscore_ops = {
.suspend = pxa_gpio_suspend,
.resume = pxa_gpio_resume,
};
+
+static int __init pxa_gpio_sysinit(void)
+{
+ register_syscore_ops(&pxa_gpio_syscore_ops);
+ return 0;
+}
+postcore_initcall(pxa_gpio_sysinit);
diff --git a/include/linux/gpio-pxa.h b/include/linux/gpio-pxa.h
new file mode 100644
index 0000000..05071ee
--- /dev/null
+++ b/include/linux/gpio-pxa.h
@@ -0,0 +1,16 @@
+#ifndef __GPIO_PXA_H
+#define __GPIO_PXA_H
+
+#define GPIO_bit(x) (1 << ((x) & 0x1f))
+
+#define gpio_to_bank(gpio) ((gpio) >> 5)
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
+ */
+extern int pxa_last_gpio;
+
+extern int pxa_irq_to_gpio(int irq);
+
+#endif /* __GPIO_PXA_H */
--
1.7.2.5
More information about the linux-arm-kernel
mailing list