[PATCH v4 08/10] ARM: SoC: convert ux500 to SoC descriptor
Marc Zyngier
marc.zyngier at arm.com
Mon Oct 3 13:35:54 EDT 2011
Convert ux500 platforms to use the SoC descriptor to provide
their SMP and CPU hotplug operations.
Cc: Linus Walleij <linus.walleij at stericsson.com>
Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
---
arch/arm/mach-ux500/board-mop500.c | 3 +++
arch/arm/mach-ux500/board-u5500.c | 1 +
arch/arm/mach-ux500/hotplug.c | 8 +++++---
arch/arm/mach-ux500/include/mach/setup.h | 9 +++++++++
arch/arm/mach-ux500/platsmp.c | 23 +++++++++++++++++++----
5 files changed, 37 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index bdd7b80..f0b1a00 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -691,6 +691,7 @@ static void __init hrefv60_init_machine(void)
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar at stericsson.com> */
.atag_offset = 0x100,
+ .soc = &ux500_soc_desc,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
@@ -700,6 +701,7 @@ MACHINE_END
MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
.atag_offset = 0x100,
+ .soc = &ux500_soc_desc,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
@@ -708,6 +710,7 @@ MACHINE_END
MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
.atag_offset = 0x100,
+ .soc = &ux500_soc_desc,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 82025ba..aeb125a 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -146,6 +146,7 @@ static void __init u5500_init_machine(void)
MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
.atag_offset = 0x100,
+ .soc = &ux500_soc_desc,
.map_io = u5500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c
index 572015e..03424ab 100644
--- a/arch/arm/mach-ux500/hotplug.c
+++ b/arch/arm/mach-ux500/hotplug.c
@@ -14,6 +14,8 @@
#include <asm/cacheflush.h>
+#include <mach/setup.h>
+
extern volatile int pen_release;
static inline void platform_do_lowpower(unsigned int cpu)
@@ -33,7 +35,7 @@ static inline void platform_do_lowpower(unsigned int cpu)
}
}
-int platform_cpu_kill(unsigned int cpu)
+int ux500_cpu_kill(unsigned int cpu)
{
return 1;
}
@@ -43,13 +45,13 @@ int platform_cpu_kill(unsigned int cpu)
*
* Called with IRQs disabled
*/
-void platform_cpu_die(unsigned int cpu)
+void ux500_cpu_die(unsigned int cpu)
{
/* directly enter low power state, skipping secure registers */
platform_do_lowpower(cpu);
}
-int platform_cpu_disable(unsigned int cpu)
+int ux500_cpu_disable(unsigned int cpu)
{
/*
* we don't allow CPU 0 to be shutdown (it is still too special
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index a7d363f..e764530 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -11,6 +11,7 @@
#ifndef __ASM_ARCH_SETUP_H
#define __ASM_ARCH_SETUP_H
+#include <asm/soc.h>
#include <asm/mach/time.h>
#include <linux/init.h>
@@ -50,4 +51,12 @@ extern struct sys_timer ux500_timer;
.type = MT_MEMORY, \
}
+extern struct arm_soc_smp_init_ops ux500_soc_smp_init_ops;
+extern struct arm_soc_smp_ops ux500_soc_smp_ops;
+extern struct arm_soc_desc ux500_soc_desc;
+
+extern int ux500_cpu_kill(unsigned int cpu);
+extern void ux500_cpu_die(unsigned int cpu);
+extern int ux500_cpu_disable(unsigned int cpu);
+
#endif /* __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 27e5281..9e9254c 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -59,7 +59,7 @@ static void __iomem *scu_base_addr(void)
static DEFINE_SPINLOCK(boot_lock);
-void __cpuinit platform_secondary_init(unsigned int cpu)
+static void __cpuinit ux500_secondary_init(unsigned int cpu)
{
/*
* if any interrupts are already enabled for the primary
@@ -81,7 +81,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
spin_unlock(&boot_lock);
}
-int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+static int __cpuinit ux500_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
unsigned long timeout;
@@ -148,7 +148,7 @@ static void __init wakeup_secondary(void)
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
-void __init smp_init_cpus(void)
+static void __init ux500_smp_init_cpus(void)
{
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
@@ -170,9 +170,24 @@ void __init smp_init_cpus(void)
set_smp_cross_call(gic_raise_softirq);
}
-void __init platform_smp_prepare_cpus(unsigned int max_cpus)
+static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
{
scu_enable(scu_base_addr());
wakeup_secondary();
}
+
+struct arm_soc_smp_init_ops ux500_soc_smp_init_ops __initdata = {
+ .smp_init_cpus = ux500_smp_init_cpus,
+ .smp_prepare_cpus = ux500_smp_prepare_cpus,
+};
+
+struct arm_soc_smp_ops ux500_soc_smp_ops __initdata = {
+ .smp_secondary_init = ux500_secondary_init,
+ .smp_boot_secondary = ux500_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_kill = ux500_cpu_kill,
+ .cpu_die = ux500_cpu_die,
+ .cpu_disable = ux500_cpu_disable,
+#endif
+};
--
1.7.0.4
More information about the linux-arm-kernel
mailing list