[PATCH] rtc: rtc-s3c: Add device tree support
Thomas Abraham
thomas.abraham at linaro.org
Tue Oct 11 03:05:27 EDT 2011
On 3 September 2011 21:19, Thomas Abraham <thomas.abraham at linaro.org> wrote:
> Add device tree based discovery support for Samsung's rtc controller.
>
> Cc: Ben Dooks <ben-linux at fluff.org>
> Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
> ---
> Documentation/devicetree/bindings/rtc/s3c-rtc.txt | 20 ++++++++++++++++++++
> drivers/rtc/rtc-s3c.c | 21 ++++++++++++++++++++-
> 2 files changed, 40 insertions(+), 1 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/rtc/s3c-rtc.txt
Ping. Any comments for this patch? If this looks fine, can this be
considered for 3.2 merge via the Samsung kernel tree.
Thanks,
Thomas.
>
> diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
> new file mode 100644
> index 0000000..90ec45f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
> @@ -0,0 +1,20 @@
> +* Samsung's S3C Real Time Clock controller
> +
> +Required properties:
> +- compatible: should be one of the following.
> + * "samsung,s3c2410-rtc" - for controllers compatible with s3c2410 rtc.
> + * "samsung,s3c6410-rtc" - for controllers compatible with s3c6410 rtc.
> +- reg: physical base address of the controller and length of memory mapped
> + region.
> +- interrupts: Two interrupt numbers to the cpu should be specified. First
> + interrupt number is the rtc alarm interupt and second interrupt number
> + is the rtc tick interrupt. The number of cells representing a interrupt
> + depends on the parent interrupt controller.
> +
> +Example:
> +
> + rtc at 10070000 {
> + compatible = "samsung,s3c6410-rtc";
> + reg = <0x10070000 0x100>;
> + interrupts = <44 0 45 0>;
> + };
> diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
> index 4e7c04e..29f928c 100644
> --- a/drivers/rtc/rtc-s3c.c
> +++ b/drivers/rtc/rtc-s3c.c
> @@ -25,6 +25,7 @@
> #include <linux/clk.h>
> #include <linux/log2.h>
> #include <linux/slab.h>
> +#include <linux/of.h>
>
> #include <mach/hardware.h>
> #include <asm/uaccess.h>
> @@ -481,7 +482,13 @@ static int __devinit s3c_rtc_probe(struct platform_device *pdev)
> goto err_nortc;
> }
>
> - s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
> +#ifdef CONFIG_OF
> + if (pdev->dev.of_node)
> + s3c_rtc_cpu_type = of_device_is_compatible(pdev->dev.of_node,
> + "samsung,s3c6410-rtc") ? TYPE_S3C64XX : TYPE_S3C2410;
> + else
> +#endif
> + s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
>
> /* Check RTC Time */
>
> @@ -603,6 +610,17 @@ static int s3c_rtc_resume(struct platform_device *pdev)
> #define s3c_rtc_resume NULL
> #endif
>
> +#ifdef CONFIG_OF
> +static const struct of_device_id s3c_rtc_dt_match[] = {
> + { .compatible = "samsung,s3c2410-rtc" },
> + { .compatible = "samsung,s3c6410-rtc" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, s3c_rtc_dt_match);
> +#else
> +#define s3c_rtc_dt_match NULL
> +#endif
> +
> static struct platform_device_id s3c_rtc_driver_ids[] = {
> {
> .name = "s3c2410-rtc",
> @@ -625,6 +643,7 @@ static struct platform_driver s3c_rtc_driver = {
> .driver = {
> .name = "s3c-rtc",
> .owner = THIS_MODULE,
> + .of_match_table = s3c_rtc_dt_match,
> },
> };
>
> --
> 1.6.6.rc2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
More information about the linux-arm-kernel
mailing list