[PATCH 1/6] mach-ux500: pass parent pointer to each platform device
Lee Jones
lee.jones at linaro.org
Mon Oct 17 07:52:53 EDT 2011
This patch provides a means for any device within ux500
platform code to allocate its own parent. This is particularly
prudent with the introduction of /sys/devices/socX, as a
device can now proclaim to be integral part of an SoC, rather
than a more generic platform device. Latter patches make good
use of this functionality.
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
arch/arm/mach-ux500/board-mop500-sdi.c | 30 +++---
arch/arm/mach-ux500/board-mop500.c | 62 ++++++-----
arch/arm/mach-ux500/board-mop500.h | 6 +-
arch/arm/mach-ux500/board-u5500-sdi.c | 4 +-
arch/arm/mach-ux500/board-u5500.c | 23 +++--
arch/arm/mach-ux500/cpu-db5500.c | 18 ++--
arch/arm/mach-ux500/cpu-db8500.c | 16 ++--
arch/arm/mach-ux500/devices-common.c | 13 ++-
arch/arm/mach-ux500/devices-common.h | 39 ++++---
arch/arm/mach-ux500/devices-db5500.h | 116 ++++++++++++---------
arch/arm/mach-ux500/devices-db8500.h | 166 +++++++++++++++++-------------
arch/arm/mach-ux500/dma-db5500.c | 3 +-
arch/arm/mach-ux500/include/mach/setup.h | 4 +-
arch/arm/mach-ux500/include/mach/usb.h | 4 +-
arch/arm/mach-ux500/usb.c | 4 +-
15 files changed, 286 insertions(+), 222 deletions(-)
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 6826fae..a36f00d 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -98,7 +98,7 @@ static struct mmci_platform_data mop500_sdi0_data = {
#endif
};
-static void sdi0_configure(void)
+static void sdi0_configure(struct device *parent)
{
int ret;
@@ -118,17 +118,17 @@ static void sdi0_configure(void)
/* Add the device, force v2 to subrevision 1 */
if (cpu_is_u8500v2())
- db8500_add_sdi0(&mop500_sdi0_data, 0x10480180);
+ db8500_add_sdi0(parent, &mop500_sdi0_data, 0x10480180);
else
- db8500_add_sdi0(&mop500_sdi0_data, 0);
+ db8500_add_sdi0(parent, &mop500_sdi0_data, 0);
}
-void mop500_sdi_tc35892_init(void)
+void mop500_sdi_tc35892_init(struct device *parent)
{
mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
sdi0_en = GPIO_SDMMC_EN;
sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL;
- sdi0_configure();
+ sdi0_configure(parent);
}
/*
@@ -206,7 +206,7 @@ static struct mmci_platform_data mop500_sdi4_data = {
#endif
};
-void __init mop500_sdi_init(void)
+void __init mop500_sdi_init(struct device *parent)
{
u32 periphid = 0;
@@ -217,10 +217,10 @@ void __init mop500_sdi_init(void)
if (!cpu_is_u8500v10())
mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
- db8500_add_sdi2(&mop500_sdi2_data, periphid);
+ db8500_add_sdi2(parent, &mop500_sdi2_data, periphid);
/* On-board eMMC */
- db8500_add_sdi4(&mop500_sdi4_data, periphid);
+ db8500_add_sdi4(parent, &mop500_sdi4_data, periphid);
/*
* On boards with the TC35892 GPIO expander, sdi0 will finally
@@ -229,35 +229,35 @@ void __init mop500_sdi_init(void)
*/
}
-void __init snowball_sdi_init(void)
+void __init snowball_sdi_init(struct device *parent)
{
u32 periphid = 0x10480180;
mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
/* On-board eMMC */
- db8500_add_sdi4(&mop500_sdi4_data, periphid);
+ db8500_add_sdi4(parent, &mop500_sdi4_data, periphid);
mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
mop500_sdi0_data.cd_invert = true;
sdi0_en = SNOWBALL_SDMMC_EN_GPIO;
sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO;
- sdi0_configure();
+ sdi0_configure(parent);
}
-void __init hrefv60_sdi_init(void)
+void __init hrefv60_sdi_init(struct device *parent)
{
u32 periphid = 0x10480180;
mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED;
- db8500_add_sdi2(&mop500_sdi2_data, periphid);
+ db8500_add_sdi2(parent, &mop500_sdi2_data, periphid);
/* On-board eMMC */
- db8500_add_sdi4(&mop500_sdi4_data, periphid);
+ db8500_add_sdi4(parent, &mop500_sdi4_data, periphid);
mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
sdi0_en = HREFV60_SDMMC_EN_GPIO;
sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
- sdi0_configure();
+ sdi0_configure(parent);
}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 4d75b0d..2d4a7de 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -224,7 +224,12 @@ static struct tps6105x_platform_data mop500_tps61052_data = {
static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
{
- mop500_sdi_tc35892_init();
+ struct device *parent = NULL;
+#if 0
+ /* FIXME: Is the sdi actually part of tc3589x? */
+ parent = tc3589x->dev;
+#endif
+ mop500_sdi_tc35892_init(parent);
}
static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
@@ -351,12 +356,12 @@ U8500_I2C_CONTROLLER(1, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
U8500_I2C_CONTROLLER(2, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
U8500_I2C_CONTROLLER(3, 0xe, 1, 8, 100000, 200, I2C_FREQ_MODE_FAST);
-static void __init mop500_i2c_init(void)
+static void __init mop500_i2c_init(struct device *parent)
{
- db8500_add_i2c0(&u8500_i2c0_data);
- db8500_add_i2c1(&u8500_i2c1_data);
- db8500_add_i2c2(&u8500_i2c2_data);
- db8500_add_i2c3(&u8500_i2c3_data);
+ db8500_add_i2c0(parent, &u8500_i2c0_data);
+ db8500_add_i2c1(parent, &u8500_i2c1_data);
+ db8500_add_i2c2(parent, &u8500_i2c2_data);
+ db8500_add_i2c3(parent, &u8500_i2c3_data);
}
static struct gpio_keys_button mop500_gpio_keys[] = {
@@ -449,9 +454,9 @@ static struct pl022_ssp_controller ssp0_platform_data = {
.num_chipselect = 5,
};
-static void __init mop500_spi_init(void)
+static void __init mop500_spi_init(struct device *parent)
{
- db8500_add_ssp0(&ssp0_platform_data);
+ db8500_add_ssp0(parent, &ssp0_platform_data);
}
#ifdef CONFIG_STE_DMA40
@@ -585,11 +590,11 @@ static struct amba_pl011_data uart2_plat = {
#endif
};
-static void __init mop500_uart_init(void)
+static void __init mop500_uart_init(struct device *parent)
{
- db8500_add_uart0(&uart0_plat);
- db8500_add_uart1(&uart1_plat);
- db8500_add_uart2(&uart2_plat);
+ db8500_add_uart0(parent, &uart0_plat);
+ db8500_add_uart1(parent, &uart1_plat);
+ db8500_add_uart2(parent, &uart2_plat);
}
static struct platform_device *snowball_platform_devs[] __initdata = {
@@ -601,21 +606,22 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
static void __init mop500_init_machine(void)
{
+ struct device *parent = NULL;
int i2c0_devs;
mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
- u8500_init_devices();
+ parent = u8500_init_devices();
mop500_pins_init();
platform_add_devices(mop500_platform_devs,
ARRAY_SIZE(mop500_platform_devs));
- mop500_i2c_init();
- mop500_sdi_init();
- mop500_spi_init();
- mop500_uart_init();
+ mop500_i2c_init(parent);
+ mop500_sdi_init(parent);
+ mop500_spi_init(parent);
+ mop500_uart_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
@@ -629,19 +635,20 @@ static void __init mop500_init_machine(void)
static void __init snowball_init_machine(void)
{
+ struct device *parent = NULL;
int i2c0_devs;
- u8500_init_devices();
+ parent = u8500_init_devices();
snowball_pins_init();
platform_add_devices(snowball_platform_devs,
ARRAY_SIZE(snowball_platform_devs));
- mop500_i2c_init();
- snowball_sdi_init();
- mop500_spi_init();
- mop500_uart_init();
+ mop500_i2c_init(parent);
+ snowball_sdi_init(parent);
+ mop500_spi_init(parent);
+ mop500_uart_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
@@ -654,6 +661,7 @@ static void __init snowball_init_machine(void)
static void __init hrefv60_init_machine(void)
{
+ struct device *parent = NULL;
int i2c0_devs;
/*
@@ -663,17 +671,17 @@ static void __init hrefv60_init_machine(void)
*/
mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
- u8500_init_devices();
+ parent = u8500_init_devices();
hrefv60_pins_init();
platform_add_devices(mop500_platform_devs,
ARRAY_SIZE(mop500_platform_devs));
- mop500_i2c_init();
- mop500_sdi_init();
- mop500_spi_init();
- mop500_uart_init();
+ mop500_i2c_init(parent);
+ mop500_sdi_init(parent);
+ mop500_spi_init(parent);
+ mop500_uart_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index de18a2a..d011da2 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -39,9 +39,9 @@
struct i2c_board_info;
-extern void mop500_sdi_init(void);
-extern void snowball_sdi_init(void);
-extern void mop500_sdi_tc35892_init(void);
+extern void mop500_sdi_init(struct device *parent);
+extern void snowball_sdi_init(struct device *parent);
+extern void mop500_sdi_tc35892_init(struct device *parent);
void __init mop500_u8500uib_init(void);
void __init mop500_stuib_init(void);
void __init mop500_pins_init(void);
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
index 739fb4c..3c70e97 100644
--- a/arch/arm/mach-ux500/board-u5500-sdi.c
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -66,9 +66,9 @@ static struct mmci_platform_data u5500_sdi0_data = {
#endif
};
-void __init u5500_sdi_init(void)
+void __init u5500_sdi_init(struct device *parent)
{
nmk_config_pins(u5500_sdi_pins, ARRAY_SIZE(u5500_sdi_pins));
- db5500_add_sdi0(&u5500_sdi0_data);
+ db5500_add_sdi0(parent, &u5500_sdi0_data);
}
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 5c9e665..3196b40a 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -96,9 +96,9 @@ static struct i2c_board_info __initdata u5500_i2c2_devices[] = {
},
};
-static void __init u5500_i2c_init(void)
+static void __init u5500_i2c_init(struct device *parent)
{
- db5500_add_i2c2(&u5500_i2c2_data);
+ db5500_add_i2c2(parent, &u5500_i2c2_data);
i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices));
}
@@ -125,20 +125,23 @@ static struct platform_device *u5500_platform_devices[] __initdata = {
&ab5500_device,
};
-static void __init u5500_uart_init(void)
+static void __init u5500_uart_init(struct device *parent)
{
- db5500_add_uart0(NULL);
- db5500_add_uart1(NULL);
- db5500_add_uart2(NULL);
+ db5500_add_uart0(parent, NULL);
+ db5500_add_uart1(parent, NULL);
+ db5500_add_uart2(parent, NULL);
}
static void __init u5500_init_machine(void)
{
- u5500_init_devices();
+ struct device *parent = NULL;
+
+ parent = u5500_init_devices();
nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins));
- u5500_i2c_init();
- u5500_sdi_init();
- u5500_uart_init();
+
+ u5500_i2c_init(parent);
+ u5500_sdi_init(parent);
+ u5500_uart_init(parent);
platform_add_devices(u5500_platform_devices,
ARRAY_SIZE(u5500_platform_devices));
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index e532c32..3995284 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -174,13 +174,13 @@ static resource_size_t __initdata db5500_gpio_base[] = {
U5500_GPIOBANK7_BASE,
};
-static void __init db5500_add_gpios(void)
+static void __init db5500_add_gpios(struct device *parent)
{
struct nmk_gpio_platform_data pdata = {
/* No custom data yet */
};
- dbx500_add_gpios(ARRAY_AND_SIZE(db5500_gpio_base),
+ dbx500_add_gpios(parent, ARRAY_AND_SIZE(db5500_gpio_base),
IRQ_DB5500_GPIO0, &pdata);
}
@@ -220,13 +220,17 @@ static int usb_db5500_tx_dma_cfg[] = {
DB5500_DMA_DEV38_USB_OTG_OEP_8
};
-void __init u5500_init_devices(void)
+struct device* __init u5500_init_devices(void)
{
- db5500_add_gpios();
- db5500_dma_init();
- db5500_add_rtc();
- db5500_add_usb(usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
+ /* FIXME: First parameter to be a real parent. */
+ db5500_add_gpios(NULL);
+ db5500_dma_init(NULL);
+ db5500_add_rtc(NULL);
+ db5500_add_usb(NULL, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
platform_add_devices(db5500_platform_devs,
ARRAY_SIZE(db5500_platform_devs));
+
+ /* FIXME: Return value to be a real parent. */
+ return NULL;
}
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 4598b06..375171e 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -153,7 +153,7 @@ static resource_size_t __initdata db8500_gpio_base[] = {
U8500_GPIOBANK8_BASE,
};
-static void __init db8500_add_gpios(void)
+static void __init db8500_add_gpios(struct device *parent)
{
struct nmk_gpio_platform_data pdata = {
/* No custom data yet */
@@ -162,7 +162,7 @@ static void __init db8500_add_gpios(void)
if (cpu_is_u8500v2())
pdata.supports_sleepmode = true;
- dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base),
+ dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
IRQ_DB8500_GPIO0, &pdata);
}
@@ -191,17 +191,19 @@ static int usb_db8500_tx_dma_cfg[] = {
/*
* This function is called from the board init
*/
-void __init u8500_init_devices(void)
+struct device* __init u8500_init_devices(void)
{
if (cpu_is_u8500ed())
dma40_u8500ed_fixup();
- db8500_add_rtc();
- db8500_add_gpios();
- db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+ /* FIXME: First parameter to be a real parent. */
+ db8500_add_rtc(NULL);
+ db8500_add_gpios(NULL);
+ db8500_add_usb(NULL, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
platform_device_register_simple("cpufreq-u8500", -1, NULL, 0);
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
- return ;
+ /* FIXME: Return value to be a real parent. */
+ return NULL;
}
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index 13a4ce0..51fd658 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -20,8 +20,9 @@
#include "devices-common.h"
struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
- int irq, void *pdata, unsigned int periphid)
+dbx500_add_amba_device(struct device *parent, const char *name,
+ resource_size_t base, int irq, void *pdata,
+ unsigned int periphid)
{
struct amba_device *dev;
int ret;
@@ -109,7 +110,7 @@ dbx500_add_platform_device_4k1irq(const char *name, int id,
}
static struct platform_device *
-dbx500_add_gpio(int id, resource_size_t addr, int irq,
+dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
struct nmk_gpio_platform_data *pdata)
{
struct resource resources[] = {
@@ -130,8 +131,8 @@ dbx500_add_gpio(int id, resource_size_t addr, int irq,
pdata, sizeof(*pdata));
}
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
- struct nmk_gpio_platform_data *pdata)
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+ int irq, struct nmk_gpio_platform_data *pdata)
{
int first = 0;
int i;
@@ -141,6 +142,6 @@ void dbx500_add_gpios(resource_size_t *base, int num, int irq,
pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
pdata->num_gpio = 32;
- dbx500_add_gpio(i, base[i], irq, pdata);
+ dbx500_add_gpio(parent, i, base[i], irq, pdata);
}
}
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
index 7825705..f8adff8 100644
--- a/arch/arm/mach-ux500/devices-common.h
+++ b/arch/arm/mach-ux500/devices-common.h
@@ -9,7 +9,7 @@
#define __DEVICES_COMMON_H
extern struct amba_device *
-dbx500_add_amba_device(const char *name, resource_size_t base,
+dbx500_add_amba_device(struct device *parent, const char *name, resource_size_t base,
int irq, void *pdata, unsigned int periphid);
extern struct platform_device *
@@ -20,43 +20,46 @@ dbx500_add_platform_device_4k1irq(const char *name, int id,
struct spi_master_cntlr;
static inline struct amba_device *
-dbx500_add_msp_spi(const char *name, resource_size_t base, int irq,
+dbx500_add_msp_spi(struct device *parent, const char *name,
+ resource_size_t base, int irq,
struct spi_master_cntlr *pdata)
{
- return dbx500_add_amba_device(name, base, irq, pdata, 0);
+ return dbx500_add_amba_device(parent, name, base, irq,
+ pdata, 0);
}
static inline struct amba_device *
-dbx500_add_spi(const char *name, resource_size_t base, int irq,
- struct spi_master_cntlr *pdata,
+dbx500_add_spi(struct device *parent, const char *name, resource_size_t base,
+ int irq, struct spi_master_cntlr *pdata,
u32 periphid)
{
- return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+ return dbx500_add_amba_device(parent, name, base, irq,
+ pdata, periphid);
}
struct mmci_platform_data;
static inline struct amba_device *
-dbx500_add_sdi(const char *name, resource_size_t base, int irq,
- struct mmci_platform_data *pdata,
- u32 periphid)
+dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base,
+ int irq, struct mmci_platform_data *pdata, u32 periphid)
{
- return dbx500_add_amba_device(name, base, irq, pdata, periphid);
+ return dbx500_add_amba_device(parent, name, base, irq,
+ pdata, periphid);
}
struct amba_pl011_data;
static inline struct amba_device *
-dbx500_add_uart(const char *name, resource_size_t base, int irq,
- struct amba_pl011_data *pdata)
+dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
+ int irq, struct amba_pl011_data *pdata)
{
- return dbx500_add_amba_device(name, base, irq, pdata, 0);
+ return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
}
struct nmk_i2c_controller;
static inline struct platform_device *
-dbx500_add_i2c(int id, resource_size_t base, int irq,
+dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
struct nmk_i2c_controller *pdata)
{
return dbx500_add_platform_device_4k1irq("nmk-i2c", id, base, irq,
@@ -74,14 +77,14 @@ dbx500_add_msp_i2s(int id, resource_size_t base, int irq,
}
static inline struct amba_device *
-dbx500_add_rtc(resource_size_t base, int irq)
+dbx500_add_rtc(struct device *parent, resource_size_t base, int irq)
{
- return dbx500_add_amba_device("rtc-pl031", base, irq, NULL, 0);
+ return dbx500_add_amba_device(parent, "rtc-pl031", base, irq, NULL, 0);
}
struct nmk_gpio_platform_data;
-void dbx500_add_gpios(resource_size_t *base, int num, int irq,
- struct nmk_gpio_platform_data *pdata);
+void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
+ int irq, struct nmk_gpio_platform_data *pdata);
#endif
diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h
index 0c4bccd..e709555 100644
--- a/arch/arm/mach-ux500/devices-db5500.h
+++ b/arch/arm/mach-ux500/devices-db5500.h
@@ -10,70 +10,90 @@
#include "devices-common.h"
-#define db5500_add_i2c1(pdata) \
- dbx500_add_i2c(1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
-#define db5500_add_i2c2(pdata) \
- dbx500_add_i2c(2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
-#define db5500_add_i2c3(pdata) \
- dbx500_add_i2c(3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
+#define db5500_add_i2c1(parent, pdata) \
+ dbx500_add_i2c(parent, 1, U5500_I2C1_BASE, IRQ_DB5500_I2C1, pdata)
+#define db5500_add_i2c2(parent, pdata) \
+ dbx500_add_i2c(parent, 2, U5500_I2C2_BASE, IRQ_DB5500_I2C2, pdata)
+#define db5500_add_i2c3(parent, pdata) \
+ dbx500_add_i2c(parent, 3, U5500_I2C3_BASE, IRQ_DB5500_I2C3, pdata)
-#define db5500_add_msp0_i2s(pdata) \
- dbx500_add_msp_i2s(0, U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_i2s(pdata) \
- dbx500_add_msp_i2s(1, U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_i2s(pdata) \
- dbx500_add_msp_i2s(2, U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+ IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+ IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+ IRQ_DB5500_MSP2, pdata)
-#define db5500_add_msp0_spi(pdata) \
- dbx500_add_msp_spi("msp0", U5500_MSP0_BASE, IRQ_DB5500_MSP0, pdata)
-#define db5500_add_msp1_spi(pdata) \
- dbx500_add_msp_spi("msp1", U5500_MSP1_BASE, IRQ_DB5500_MSP1, pdata)
-#define db5500_add_msp2_spi(pdata) \
- dbx500_add_msp_spi("msp2", U5500_MSP2_BASE, IRQ_DB5500_MSP2, pdata)
+#define db5500_add_msp0_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp0", U5500_MSP0_BASE, \
+ IRQ_DB5500_MSP0, pdata)
+#define db5500_add_msp1_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp1", U5500_MSP1_BASE, \
+ IRQ_DB5500_MSP1, pdata)
+#define db5500_add_msp2_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp2", U5500_MSP2_BASE, \
+ IRQ_DB5500_MSP2, pdata)
-#define db5500_add_rtc() \
- dbx500_add_rtc(U5500_RTC_BASE, IRQ_DB5500_RTC);
+#define db5500_add_rtc(parent) \
+ dbx500_add_rtc(parent, U5500_RTC_BASE, IRQ_DB5500_RTC);
-#define db5500_add_usb(rx_cfg, tx_cfg) \
- ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
+#define db5500_add_usb(parent, rx_cfg, tx_cfg) \
+ ux500_add_usb(parent, U5500_USBOTG_BASE, \
+ IRQ_DB5500_USBOTG, rx_cfg, tx_cfg)
-#define db5500_add_sdi0(pdata) \
- dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \
+#define db5500_add_sdi0(parent, pdata) \
+ dbx500_add_sdi(parent, "sdi0", U5500_SDI0_BASE, \
+ IRQ_DB5500_SDMMC0, pdata, \
0x10480180)
-#define db5500_add_sdi1(pdata) \
- dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \
+#define db5500_add_sdi1(parent, pdata) \
+ dbx500_add_sdi(parent, "sdi1", U5500_SDI1_BASE, \
+ IRQ_DB5500_SDMMC1, pdata, \
0x10480180)
-#define db5500_add_sdi2(pdata) \
- dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \
+#define db5500_add_sdi2(parent, pdata) \
+ dbx500_add_sdi(parent, "sdi2", U5500_SDI2_BASE, \
+ IRQ_DB5500_SDMMC2, pdata \
0x10480180)
-#define db5500_add_sdi3(pdata) \
- dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \
+#define db5500_add_sdi3(parent, pdata) \
+ dbx500_add_sdi(parent, "sdi3", U5500_SDI3_BASE, \
+ IRQ_DB5500_SDMMC3, pdata \
0x10480180)
-#define db5500_add_sdi4(pdata) \
- dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \
+#define db5500_add_sdi4(parent, pdata) \
+ dbx500_add_sdi(parent, "sdi4", U5500_SDI4_BASE, \
+ IRQ_DB5500_SDMMC4, pdata \
0x10480180)
/* This one has a bad peripheral ID in the U5500 silicon */
-#define db5500_add_spi0(pdata) \
- dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \
+#define db5500_add_spi0(parent, pdata) \
+ dbx500_add_spi(parent, "spi0", U5500_SPI0_BASE, \
+ IRQ_DB5500_SPI0, pdata, \
0x10080023)
-#define db5500_add_spi1(pdata) \
- dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \
+#define db5500_add_spi1(parent, pdata) \
+ dbx500_add_spi(parent, "spi1", U5500_SPI1_BASE, \
+ IRQ_DB5500_SPI1, pdata, \
0x10080023)
-#define db5500_add_spi2(pdata) \
- dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \
+#define db5500_add_spi2(parent, pdata) \
+ dbx500_add_spi(parent, "spi2", U5500_SPI2_BASE, \
+ IRQ_DB5500_SPI2, pdata \
0x10080023)
-#define db5500_add_spi3(pdata) \
- dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \
+#define db5500_add_spi3(parent, pdata) \
+ dbx500_add_spi(parent, "spi3", U5500_SPI3_BASE, \
+ IRQ_DB5500_SPI3, pdata \
0x10080023)
-#define db5500_add_uart0(plat) \
- dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat)
-#define db5500_add_uart1(plat) \
- dbx500_add_uart("uart1", U5500_UART1_BASE, IRQ_DB5500_UART1, plat)
-#define db5500_add_uart2(plat) \
- dbx500_add_uart("uart2", U5500_UART2_BASE, IRQ_DB5500_UART2, plat)
-#define db5500_add_uart3(plat) \
- dbx500_add_uart("uart3", U5500_UART3_BASE, IRQ_DB5500_UART3, plat)
+#define db5500_add_uart0(parent, plat) \
+ dbx500_add_uart(parent, "uart0", U5500_UART0_BASE, \
+ IRQ_DB5500_UART0, plat)
+#define db5500_add_uart1(parent, plat) \
+ dbx500_add_uart(parent, "uart1", U5500_UART1_BASE, \
+ IRQ_DB5500_UART1, plat)
+#define db5500_add_uart2(parent, plat) \
+ dbx500_add_uart(parent, "uart2", U5500_UART2_BASE, \
+ IRQ_DB5500_UART2, plat)
+#define db5500_add_uart3(parent, plat) \
+ dbx500_add_uart(parent, "uart3", U5500_UART3_BASE, \
+ IRQ_DB5500_UART3, plat)
#endif
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index cbd4a9a..9bd08ad 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -14,7 +14,9 @@ struct ske_keypad_platform_data;
struct pl022_ssp_controller;
static inline struct platform_device *
-db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
+db8500_add_ske_keypad(struct device *parent,
+ struct ske_keypad_platform_data *pdata,
+ size_t size)
{
return dbx500_add_platform_device_4k1irq("nmk-ske-keypad", -1,
U8500_SKE_BASE,
@@ -22,80 +24,100 @@ db8500_add_ske_keypad(struct ske_keypad_platform_data *pdata)
}
static inline struct amba_device *
-db8500_add_ssp(const char *name, resource_size_t base, int irq,
- struct pl022_ssp_controller *pdata)
+db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
+ int irq, struct pl022_ssp_controller *pdata)
{
- return dbx500_add_amba_device(name, base, irq, pdata, 0);
+ return dbx500_add_amba_device(parent, name, base, irq, pdata, 0);
}
-#define db8500_add_i2c0(pdata) \
- dbx500_add_i2c(0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
-#define db8500_add_i2c1(pdata) \
- dbx500_add_i2c(1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
-#define db8500_add_i2c2(pdata) \
- dbx500_add_i2c(2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
-#define db8500_add_i2c3(pdata) \
- dbx500_add_i2c(3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
-#define db8500_add_i2c4(pdata) \
- dbx500_add_i2c(4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
-
-#define db8500_add_msp0_i2s(pdata) \
- dbx500_add_msp_i2s(0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_i2s(pdata) \
- dbx500_add_msp_i2s(1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_i2s(pdata) \
- dbx500_add_msp_i2s(2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_i2s(pdata) \
- dbx500_add_msp_i2s(3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_msp0_spi(pdata) \
- dbx500_add_msp_spi("msp0", U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_spi(pdata) \
- dbx500_add_msp_spi("msp1", U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_spi(pdata) \
- dbx500_add_msp_spi("msp2", U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_spi(pdata) \
- dbx500_add_msp_spi("msp3", U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_rtc() \
- dbx500_add_rtc(U8500_RTC_BASE, IRQ_DB8500_RTC);
-
-#define db8500_add_usb(rx_cfg, tx_cfg) \
- ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
-
-#define db8500_add_sdi0(pdata, pid) \
- dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid)
-#define db8500_add_sdi1(pdata, pid) \
- dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid)
-#define db8500_add_sdi2(pdata, pid) \
- dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid)
-#define db8500_add_sdi3(pdata, pid) \
- dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid)
-#define db8500_add_sdi4(pdata, pid) \
- dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid)
-#define db8500_add_sdi5(pdata, pid) \
- dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid)
-
-#define db8500_add_ssp0(pdata) \
- db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata)
-#define db8500_add_ssp1(pdata) \
- db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata)
-
-#define db8500_add_spi0(pdata) \
- dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0)
-#define db8500_add_spi1(pdata) \
- dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0)
-#define db8500_add_spi2(pdata) \
- dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0)
-#define db8500_add_spi3(pdata) \
- dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0)
-
-#define db8500_add_uart0(pdata) \
- dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata)
-#define db8500_add_uart1(pdata) \
- dbx500_add_uart("uart1", U8500_UART1_BASE, IRQ_DB8500_UART1, pdata)
-#define db8500_add_uart2(pdata) \
- dbx500_add_uart("uart2", U8500_UART2_BASE, IRQ_DB8500_UART2, pdata)
+#define db8500_add_i2c0(parent, pdata) \
+ dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
+#define db8500_add_i2c1(parent, pdata) \
+ dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
+#define db8500_add_i2c2(parent, pdata) \
+ dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
+#define db8500_add_i2c3(parent, pdata) \
+ dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
+#define db8500_add_i2c4(parent, pdata) \
+ dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
+
+#define db8500_add_msp0_i2s(parent, pdata) \
+ dbx500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_i2s(parent, pdata) \
+ dbx500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_i2s(parent, pdata) \
+ dbx500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_i2s(parent, pdata) \
+ dbx500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_msp0_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \
+ IRQ_DB8500_MSP0, pdata)
+#define db8500_add_msp1_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \
+ IRQ_DB8500_MSP1, pdata)
+#define db8500_add_msp2_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \
+ IRQ_DB8500_MSP2, pdata)
+#define db8500_add_msp3_spi(parent, pdata) \
+ dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \
+ IRQ_DB8500_MSP1, pdata)
+
+#define db8500_add_rtc(parent) \
+ dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC);
+
+#define db8500_add_usb(parent, rx_cfg, tx_cfg) \
+ ux500_add_usb(parent, U8500_USBOTG_BASE, \
+ IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
+
+#define db8500_add_sdi0(parent, pdata, pid) \
+ dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \
+ IRQ_DB8500_SDMMC0, pdata, pid)
+#define db8500_add_sdi1(parent, pdata, pid) \
+ dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \
+ IRQ_DB8500_SDMMC1, pdata, pid)
+#define db8500_add_sdi2(parent, pdata, pid) \
+ dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \
+ IRQ_DB8500_SDMMC2, pdata, pid)
+#define db8500_add_sdi3(parent, pdata, pid) \
+ dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \
+ IRQ_DB8500_SDMMC3, pdata, pid)
+#define db8500_add_sdi4(parent, pdata, pid) \
+ dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \
+ IRQ_DB8500_SDMMC4, pdata, pid)
+#define db8500_add_sdi5(parent, pdata, pid) \
+ dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \
+ IRQ_DB8500_SDMMC5, pdata, pid)
+
+#define db8500_add_ssp0(parent, pdata) \
+ db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \
+ IRQ_DB8500_SSP0, pdata)
+#define db8500_add_ssp1(parent, pdata) \
+ db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \
+ IRQ_DB8500_SSP1, pdata)
+
+#define db8500_add_spi0(parent, pdata) \
+ dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \
+ IRQ_DB8500_SPI0, pdata, 0)
+#define db8500_add_spi1(parent, pdata) \
+ dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \
+ IRQ_DB8500_SPI1, pdata, 0)
+#define db8500_add_spi2(parent, pdata) \
+ dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \
+ IRQ_DB8500_SPI2, pdata, 0)
+#define db8500_add_spi3(parent, pdata) \
+ dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \
+ IRQ_DB8500_SPI3, pdata, 0)
+
+#define db8500_add_uart0(parent, pdata) \
+ dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \
+ IRQ_DB8500_UART0, pdata)
+#define db8500_add_uart1(parent, pdata) \
+ dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \
+ IRQ_DB8500_UART1, pdata)
+#define db8500_add_uart2(parent, pdata) \
+ dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \
+ IRQ_DB8500_UART2, pdata)
#endif
diff --git a/arch/arm/mach-ux500/dma-db5500.c b/arch/arm/mach-ux500/dma-db5500.c
index 1cfab68..41e9470 100644
--- a/arch/arm/mach-ux500/dma-db5500.c
+++ b/arch/arm/mach-ux500/dma-db5500.c
@@ -125,10 +125,11 @@ static struct platform_device dma40_device = {
.resource = dma40_resources
};
-void __init db5500_dma_init(void)
+void __init db5500_dma_init(struct device *parent)
{
int ret;
+ dma40_device.dev.parent = parent;
ret = platform_device_register(&dma40_device);
if (ret)
dev_err(&dma40_device.dev, "unable to register device: %d\n", ret);
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index a7d363f..88e8d6b 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -23,9 +23,9 @@ extern void __init u8500_init_devices(void);
extern void __init ux500_init_irq(void);
-extern void __init u5500_sdi_init(void);
+extern void __init u5500_sdi_init(struct device *parent);
-extern void __init db5500_dma_init(void);
+extern void __init db5500_dma_init(struct device *parent);
/* We re-use nomadik_timer for this platform */
extern void nmdk_timer_init(void);
diff --git a/arch/arm/mach-ux500/include/mach/usb.h b/arch/arm/mach-ux500/include/mach/usb.h
index d3739d4..4c1cc50 100644
--- a/arch/arm/mach-ux500/include/mach/usb.h
+++ b/arch/arm/mach-ux500/include/mach/usb.h
@@ -20,6 +20,6 @@ struct ux500_musb_board_data {
bool (*dma_filter)(struct dma_chan *chan, void *filter_param);
};
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
- int *dma_tx_cfg);
+void ux500_add_usb(struct device *parent, resource_size_t base,
+ int irq, int *dma_rx_cfg, int *dma_tx_cfg);
#endif
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index 0a01cbd..bef6a31 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -146,8 +146,8 @@ static inline void ux500_usb_dma_update_tx_ch_config(int *dst_dev_type)
musb_dma_tx_ch[idx].dst_dev_type = dst_dev_type[idx];
}
-void ux500_add_usb(resource_size_t base, int irq, int *dma_rx_cfg,
- int *dma_tx_cfg)
+void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
+ int *dma_rx_cfg, int *dma_tx_cfg)
{
ux500_musb_device.resource[0].start = base;
ux500_musb_device.resource[0].end = base + SZ_64K - 1;
--
1.7.5.4
More information about the linux-arm-kernel
mailing list