[PATCHv2 2/2] msm: Support DEBUG_LL on MSM8660 and MSM8960
Nicolas Pitre
nico at fluxnic.net
Fri Oct 21 00:37:22 EDT 2011
On Thu, 20 Oct 2011, Stephen Boyd wrote:
> Add support for DEBUG_LL on the 8660 and 8960 development boards.
> While we're here, cleanup the uncompress.h code a bit.
>
> Signed-off-by: Stephen Boyd <sboyd at codeaurora.org>
> Cc: Nicolas Pitre <nico at fluxnic.net>
Acked-by: Nicolas Pitre <nicolas.pitre at linaro.org>
> ---
> arch/arm/Kconfig.debug | 16 +++++++++++
> arch/arm/mach-msm/Kconfig | 3 ++
> arch/arm/mach-msm/include/mach/debug-macro.S | 32 ++++++++++++++++++++--
> arch/arm/mach-msm/include/mach/msm_iomap-8960.h | 5 +++
> arch/arm/mach-msm/include/mach/msm_iomap-8x60.h | 5 +++
> arch/arm/mach-msm/include/mach/uncompress.h | 31 ++++++++++++++++-----
> arch/arm/mach-msm/io.c | 6 ++++
> 7 files changed, 87 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
> index c2db187..07d0e74 100644
> --- a/arch/arm/Kconfig.debug
> +++ b/arch/arm/Kconfig.debug
> @@ -149,6 +149,22 @@ choice
> Say Y here if you want the debug print routines to direct
> their output to the third serial port on MSM devices.
>
> + config DEBUG_MSM8660_UART
> + bool "Kernel low-level debugging messages via MSM 8660 UART"
> + depends on ARCH_MSM8X60
> + select MSM_HAS_DEBUG_UART_HS
> + help
> + Say Y here if you want the debug print routines to direct
> + their output to the serial port on MSM 8960 devices.
> +
> + config DEBUG_MSM8960_UART
> + bool "Kernel low-level debugging messages via MSM 8960 UART"
> + depends on ARCH_MSM8960
> + select MSM_HAS_DEBUG_UART_HS
> + help
> + Say Y here if you want the debug print routines to direct
> + their output to the serial port on MSM 8960 devices.
> +
> endchoice
>
> config EARLY_PRINTK
> diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
> index 5b07b61..000ddf0 100644
> --- a/arch/arm/mach-msm/Kconfig
> +++ b/arch/arm/mach-msm/Kconfig
> @@ -60,6 +60,9 @@ config ARCH_MSM8960
>
> endchoice
>
> +config MSM_HAS_DEBUG_UART_HS
> + bool
> +
> config MSM_SOC_REV_A
> bool
> config ARCH_MSM_SCORPIONMP
> diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
> index 43d62c6..2a9f1df 100644
> --- a/arch/arm/mach-msm/include/mach/debug-macro.S
> +++ b/arch/arm/mach-msm/include/mach/debug-macro.S
> @@ -1,6 +1,7 @@
> /*
> *
> * Copyright (C) 2007 Google, Inc.
> + * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
> * Author: Brian Swetland <swetland at google.com>
> *
> * This software is licensed under the terms of the GNU General Public
> @@ -24,17 +25,42 @@
> #endif
> .endm
>
> - .macro senduart,rd,rx
> + .macro senduart, rd, rx
> +#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
> + @ Write the 1 character to UARTDM_TF
> + str \rd, [\rx, #0x70]
> +#else
> teq \rx, #0
> strne \rd, [\rx, #0x0C]
> +#endif
> .endm
>
> - .macro waituart,rd,rx
> + .macro waituart, rd, rx
> +#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
> + @ check for TX_EMT in UARTDM_SR
> + ldr \rd, [\rx, #0x08]
> + tst \rd, #0x08
> + bne 1002f
> + @ wait for TXREADY in UARTDM_ISR
> +1001: ldr \rd, [\rx, #0x14]
> + tst \rd, #0x80
> + beq 1001b
> +1002:
> + @ Clear TX_READY by writing to the UARTDM_CR register
> + mov \rd, #0x300
> + str \rd, [\rx, #0x10]
> + @ Write 0x1 to NCF register
> + mov \rd, #0x1
> + str \rd, [\rx, #0x40]
> + @ UARTDM reg. Read to induce delay
> + ldr \rd, [\rx, #0x08]
> +#else
> @ wait for TX_READY
> 1001: ldr \rd, [\rx, #0x08]
> tst \rd, #0x04
> beq 1001b
> +#endif
> .endm
>
> - .macro busyuart,rd,rx
> + .macro busyuart, rd, rx
> .endm
> diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
> index 3c9d960..800b557 100644
> --- a/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
> +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8960.h
> @@ -45,4 +45,9 @@
> #define MSM8960_TMR0_PHYS 0x0208A000
> #define MSM8960_TMR0_SIZE SZ_4K
>
> +#ifdef CONFIG_DEBUG_MSM8960_UART
> +#define MSM_DEBUG_UART_BASE 0xE1040000
> +#define MSM_DEBUG_UART_PHYS 0x16440000
> +#endif
> +
> #endif
> diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
> index 3b19b8f..54e12ca 100644
> --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
> +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x60.h
> @@ -62,4 +62,9 @@
> #define MSM8X60_TMR0_PHYS 0x02040000
> #define MSM8X60_TMR0_SIZE SZ_4K
>
> +#ifdef CONFIG_DEBUG_MSM8660_UART
> +#define MSM_DEBUG_UART_BASE 0xE1040000
> +#define MSM_DEBUG_UART_PHYS 0x19C40000
> +#endif
> +
> #endif
> diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
> index d94292c..ee906e4 100644
> --- a/arch/arm/mach-msm/include/mach/uncompress.h
> +++ b/arch/arm/mach-msm/include/mach/uncompress.h
> @@ -1,6 +1,6 @@
> -/* arch/arm/mach-msm/include/mach/uncompress.h
> - *
> +/*
> * Copyright (C) 2007 Google, Inc.
> + * Copyright (c) 2011, Code Aurora Forum. All rights reserved.
> *
> * This software is licensed under the terms of the GNU General Public
> * License version 2, as published by the Free Software Foundation, and
> @@ -14,17 +14,32 @@
> */
>
> #ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
> +#define __ASM_ARCH_MSM_UNCOMPRESS_H
>
> -#include "hardware.h"
> -#include "linux/io.h"
> -#include "mach/msm_iomap.h"
> +#include <linux/io.h>
> +#include <asm/processor.h>
> +#include <mach/msm_iomap.h>
>
> static void putc(int c)
> {
> #if defined(MSM_DEBUG_UART_PHYS)
> - unsigned base = MSM_DEBUG_UART_PHYS;
> - while (!(readl(base + 0x08) & 0x04)) ;
> - writel(c, base + 0x0c);
> +#ifdef CONFIG_MSM_HAS_DEBUG_UART_HS
> + /*
> + * Wait for TX_READY to be set; but skip it if we have a
> + * TX underrun.
> + */
> + if (readl_relaxed(MSM_DEBUG_UART_PHYS + 0x08) & 0x08)
> + while (!(readl_relaxed(MSM_DEBUG_UART_PHYS + 0x14) & 0x80))
> + cpu_relax();
> +
> + writel_relaxed(0x300, MSM_DEBUG_UART_PHYS + 0x10);
> + writel_relaxed(0x1, MSM_DEBUG_UART_PHYS + 0x40);
> + writel_relaxed(c, MSM_DEBUG_UART_PHYS + 0x70);
> +#else
> + while (!(readl_relaxed(MSM_DEBUG_UART_PHYS + 0x08) & 0x04))
> + cpu_relax();
> + writel_relaxed(c, MSM_DEBUG_UART_PHYS + 0x0c);
> +#endif
> #endif
> }
>
> diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
> index 0bf9502..524d927 100644
> --- a/arch/arm/mach-msm/io.c
> +++ b/arch/arm/mach-msm/io.c
> @@ -110,6 +110,9 @@ static struct map_desc msm8x60_io_desc[] __initdata = {
> MSM_CHIP_DEVICE(TMR0, MSM8X60),
> MSM_DEVICE(ACC),
> MSM_DEVICE(GCC),
> +#ifdef CONFIG_DEBUG_MSM8660_UART
> + MSM_DEVICE(DEBUG_UART),
> +#endif
> };
>
> void __init msm_map_msm8x60_io(void)
> @@ -124,6 +127,9 @@ static struct map_desc msm8960_io_desc[] __initdata = {
> MSM_CHIP_DEVICE(QGIC_CPU, MSM8960),
> MSM_CHIP_DEVICE(TMR, MSM8960),
> MSM_CHIP_DEVICE(TMR0, MSM8960),
> +#ifdef CONFIG_DEBUG_MSM8960_UART
> + MSM_DEVICE(DEBUG_UART),
> +#endif
> };
>
> void __init msm_map_msm8960_io(void)
> --
> Sent by an employee of the Qualcomm Innovation Center, Inc.
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
>
More information about the linux-arm-kernel
mailing list