[PATCH v2] arm: omap: Fix errors and warnings when building for one board

[Sanjeev Premi]

When customizing omap2plus_defconfig to build for only
one board (omap3evm), I came across these warnings and
errors (filenames truncated):

arch/arm/mach-omap2/board-generic.c:76:20: warning: 'omap4_init' defined but not used
arch/arm/mach-omap2/built-in.o: In function `omap2420_init_early':
arch/arm/mach-omap2/io.c:364: undefined reference to `omap2_set_globals_242x'
arch/arm/mach-omap2/io.c:366: undefined reference to `omap2xxx_voltagedomains_init'
arch/arm/mach-omap2/io.c:367: undefined reference to `omap242x_powerdomains_init'
arch/arm/mach-omap2/io.c:368: undefined reference to `omap242x_clockdomains_init'
arch/arm/mach-omap2/io.c:369: undefined reference to `omap2420_hwmod_init'
arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early':
arch/arm/mach-omap2/io.c:376: undefined reference to `omap2_set_globals_243x'
arch/arm/mach-omap2/io.c:378: undefined reference to `omap2xxx_voltagedomains_init'
arch/arm/mach-omap2/io.c:379: undefined reference to `omap243x_powerdomains_init'
arch/arm/mach-omap2/io.c:380: undefined reference to `omap243x_clockdomains_init'
arch/arm/mach-omap2/io.c:381: undefined reference to `omap2430_hwmod_init'
arch/arm/mach-omap2/built-in.o: In function `omap4430_init_early':
arch/arm/mach-omap2/io.c:436: undefined reference to `omap2_set_globals_443x'
arch/arm/mach-omap2/io.c:438: undefined reference to `omap44xx_voltagedomains_init'
arch/arm/mach-omap2/io.c:439: undefined reference to `omap44xx_powerdomains_init'
arch/arm/mach-omap2/io.c:440: undefined reference to `omap44xx_clockdomains_init'
arch/arm/mach-omap2/io.c:441: undefined reference to `omap44xx_hwmod_init'

This patch fixes them.

Signed-off-by: Sanjeev Premi <premi at ti.com>
---

 Changes since v1:
    - #if defined() to #ifdef
    - Moved an #ifdef to take care of additional warning
      related to sdp4430_twldata. Had missed squashing the
      patch before sending v1.

 Adding ifdefs makes the code bit ugly and is prone to propagate
 further. Not sure if DT will help here, but this patch would be
 useful for people trying to build for individual boards.

 Compile tested for OMAP3EVM.

 Applies to linux-omap/master at:
   fb4df0f : ARM: OMAP1: Fix warnings about enabling 32 KiHz timer


 arch/arm/mach-omap2/board-generic.c |    8 ++++++++
 arch/arm/mach-omap2/io.c            |    6 ++++++
 2 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index d9ccb9d..b36003f 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -29,6 +29,7 @@
  * XXX: Still needed to boot until the i2c & twl driver is adapted to
  * device-tree
  */
+#ifdef CONFIG_ARCH_OMAP4
 static struct twl4030_platform_data sdp4430_twldata = {
 	.irq_base	= TWL6030_IRQ_BASE,
 	.irq_end	= TWL6030_IRQ_END,
@@ -38,16 +39,19 @@ static void __init omap4_i2c_init(void)
 {
 	omap4_pmic_init("twl6030", &sdp4430_twldata);
 }
+#endif
 
 static struct twl4030_platform_data beagle_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 };
 
+#ifdef CONFIG_ARCH_OMAP3
 static void __init omap3_i2c_init(void)
 {
 	omap3_pmic_init("twl4030", &beagle_twldata);
 }
+#endif
 
 static struct of_device_id omap_dt_match_table[] __initdata = {
 	{ .compatible = "simple-bus", },
@@ -73,17 +77,21 @@ static void __init omap_generic_init(void)
 	of_platform_populate(NULL, omap_dt_match_table, NULL, NULL);
 }
 
+#ifdef CONFIG_ARCH_OMAP4
 static void __init omap4_init(void)
 {
 	omap4_i2c_init();
 	omap_generic_init();
 }
+#endif
 
+#ifdef CONFIG_ARCH_OMAP3
 static void __init omap3_init(void)
 {
 	omap3_i2c_init();
 	omap_generic_init();
 }
+#endif
 
 #if defined(CONFIG_SOC_OMAP2420)
 static const char *omap242x_boards_compat[] __initdata = {
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index aa96538..08c30c1 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -359,6 +359,7 @@ static void __init omap_hwmod_init_postsetup(void)
 	omap_pm_if_early_init();
 }
 
+#ifdef CONFIG_ARCH_OMAP2
 void __init omap2420_init_early(void)
 {
 	omap2_set_globals_242x();
@@ -382,11 +383,13 @@ void __init omap2430_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap2430_clk_init();
 }
+#endif
 
 /*
  * Currently only board-omap3beagle.c should call this because of the
  * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
  */
+#ifdef CONFIG_ARCH_OMAP3
 void __init omap3_init_early(void)
 {
 	omap2_set_globals_3xxx();
@@ -430,7 +433,9 @@ void __init ti816x_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap3xxx_clk_init();
 }
+#endif
 
+#ifdef CONFIG_ARCH_OMAP4
 void __init omap4430_init_early(void)
 {
 	omap2_set_globals_443x();
@@ -442,6 +447,7 @@ void __init omap4430_init_early(void)
 	omap_hwmod_init_postsetup();
 	omap4xxx_clk_init();
 }
+#endif
 
 void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 				      struct omap_sdrc_params *sdrc_cs1)
-- 
1.7.0.4