[PATCH v2 5/7] ARM: highbank: add SMP support
Shawn Guo
shawn.guo at freescale.com
Fri Oct 7 08:40:28 EDT 2011
On Wed, Oct 05, 2011 at 11:00:16AM -0500, Rob Herring wrote:
> Shawn,
>
> On 09/05/2011 08:01 PM, Shawn Guo wrote:
> > On Wed, Aug 31, 2011 at 08:44:04PM -0500, Rob Herring wrote:
> >> From: Rob Herring <rob.herring at calxeda.com>
> >>
> >> This enables SMP support on highbank processor.
> >>
> >> Signed-off-by: Rob Herring <rob.herring at calxeda.com>
> >> ---
> >> Changes in v2:
> >> - drop NULL check of scu_base
> >> - use IPI #0 instead of #1 to boot secondary
> >> - s/a9_base_addr/scu_base_addr/
> >> - fix muliple mapping of twd registers
> >>
> >> arch/arm/Kconfig | 2 +-
> >> arch/arm/mach-highbank/Makefile | 2 +
> >> arch/arm/mach-highbank/localtimer.c | 38 +++++++++++++++++
> >> arch/arm/mach-highbank/platsmp.c | 78 +++++++++++++++++++++++++++++++++++
> >> 4 files changed, 119 insertions(+), 1 deletions(-)
> >> create mode 100644 arch/arm/mach-highbank/localtimer.c
> >> create mode 100644 arch/arm/mach-highbank/platsmp.c
> >>
> >> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> >> index 9019a56..6d2add5 100644
> >> --- a/arch/arm/Kconfig
> >> +++ b/arch/arm/Kconfig
> >> @@ -1372,7 +1372,7 @@ config SMP
> >> depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
> >> MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
> >> ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
> >> - ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE
> >> + ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE || ARCH_HIGHBANK
> >> select USE_GENERIC_SMP_HELPERS
> >> select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
> >> help
> >> diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile
> >> index 11d4010..311c0e8e 100644
> >> --- a/arch/arm/mach-highbank/Makefile
> >> +++ b/arch/arm/mach-highbank/Makefile
> >> @@ -1,2 +1,4 @@
> >> obj-y := clock.o highbank.o system.o
> >> obj-$(CONFIG_DEBUG_LL) += lluart.o
> >> +obj-$(CONFIG_SMP) += platsmp.o
> >> +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
> >> diff --git a/arch/arm/mach-highbank/localtimer.c b/arch/arm/mach-highbank/localtimer.c
> >> new file mode 100644
> >> index 0000000..344ea29
> >> --- /dev/null
> >> +++ b/arch/arm/mach-highbank/localtimer.c
> >> @@ -0,0 +1,38 @@
> >> +/*
> >> + * Copyright 2010-2011 Calxeda, Inc.
> >> + * Based on localtimer.c, Copyright (C) 2002 ARM Ltd.
> >> + *
> >> + * This program is free software; you can redistribute it and/or modify it
> >> + * under the terms and conditions of the GNU General Public License,
> >> + * version 2, as published by the Free Software Foundation.
> >> + *
> >> + * This program is distributed in the hope it will be useful, but WITHOUT
> >> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> >> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> >> + * more details.
> >> + *
> >> + * You should have received a copy of the GNU General Public License along with
> >> + * this program. If not, see <http://www.gnu.org/licenses/>.
> >> + */
> >> +#include <linux/init.h>
> >> +#include <linux/clockchips.h>
> >> +#include <linux/of.h>
> >> +#include <linux/of_address.h>
> >> +#include <linux/of_irq.h>
> >> +
> >> +#include <asm/smp_twd.h>
> >> +
> >> +/*
> >> + * Setup the local clock events for a CPU.
> >> + */
> >> +int __cpuinit local_timer_setup(struct clock_event_device *evt)
> >> +{
> >> + struct device_node *np;
> >> +
> >> + np = of_find_compatible_node(NULL, NULL, "arm,smp-twd");
> >> + if (!twd_base)
> >> + twd_base = of_iomap(np, 0);
> >
> > WARN_ON(!twd_base)?
> >
>
> Okay, will add it. Can I add your Reviewed-by for the series?
>
Yes, if you'd like to ;)
--
Regards,
Shawn
More information about the linux-arm-kernel
mailing list