[PATCH v2] gpio: pl061: add DT binding support

Grant Likely grant.likely at secretlab.ca
Mon Oct 24 18:24:08 EDT 2011


On Wed, Aug 10, 2011 at 04:31:46PM -0500, Rob Herring wrote:
> From: Rob Herring <rob.herring at calxeda.com>
> 
> This adds devicetree binding support to the ARM pl061 driver removing the
> platform_data dependency. When DT binding is used, the gpio numbering is
> assigned dynamically. For now, interrupts are not supported with DT until
> irqdomains learn dynamic irq assignment.
> 
> Rather than add another case of -1, updating the driver to use NO_IRQ.
> 
> Signed-off-by: Rob Herring <rob.herring at calxeda.com>
> Cc: Grant Likely <grant.likely at secretlab.ca>

Applied, thanks.

g.

> ---
> 
> v2:
> - Add other -1 to NO_IRQ conversions
> - Drop DT irq support for now
> 
>  drivers/gpio/gpio-pl061.c  |   31 +++++++++++++++++++++----------
>  include/linux/amba/pl061.h |    3 +--
>  2 files changed, 22 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
> index 2c5a18f..093c90b 100644
> --- a/drivers/gpio/gpio-pl061.c
> +++ b/drivers/gpio/gpio-pl061.c
> @@ -118,7 +118,7 @@ static int pl061_to_irq(struct gpio_chip *gc, unsigned offset)
>  {
>  	struct pl061_gpio *chip = container_of(gc, struct pl061_gpio, gc);
>  
> -	if (chip->irq_base == (unsigned) -1)
> +	if (chip->irq_base == NO_IRQ)
>  		return -EINVAL;
>  
>  	return chip->irq_base + offset;
> @@ -246,6 +246,18 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
>  	if (chip == NULL)
>  		return -ENOMEM;
>  
> +	pdata = dev->dev.platform_data;
> +	if (pdata) {
> +		chip->gc.base = pdata->gpio_base;
> +		chip->irq_base = pdata->irq_base;
> +	} else if (dev->dev.of_node) {
> +		chip->gc.base = -1;
> +		chip->irq_base = NO_IRQ;
> +	} else {
> +		ret = -ENODEV;
> +		goto free_mem;
> +	}
> +
>  	if (!request_mem_region(dev->res.start,
>  				resource_size(&dev->res), "pl061")) {
>  		ret = -EBUSY;
> @@ -267,14 +279,11 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
>  	chip->gc.get = pl061_get_value;
>  	chip->gc.set = pl061_set_value;
>  	chip->gc.to_irq = pl061_to_irq;
> -	chip->gc.base = pdata->gpio_base;
>  	chip->gc.ngpio = PL061_GPIO_NR;
>  	chip->gc.label = dev_name(&dev->dev);
>  	chip->gc.dev = &dev->dev;
>  	chip->gc.owner = THIS_MODULE;
>  
> -	chip->irq_base = pdata->irq_base;
> -
>  	ret = gpiochip_add(&chip->gc);
>  	if (ret)
>  		goto iounmap;
> @@ -283,7 +292,7 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
>  	 * irq_chip support
>  	 */
>  
> -	if (chip->irq_base == (unsigned) -1)
> +	if (chip->irq_base == NO_IRQ)
>  		return 0;
>  
>  	writeb(0, chip->base + GPIOIE); /* disable irqs */
> @@ -307,11 +316,13 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
>  	list_add(&chip->list, chip_list);
>  
>  	for (i = 0; i < PL061_GPIO_NR; i++) {
> -		if (pdata->directions & (1 << i))
> -			pl061_direction_output(&chip->gc, i,
> -					pdata->values & (1 << i));
> -		else
> -			pl061_direction_input(&chip->gc, i);
> +		if (pdata) {
> +			if (pdata->directions & (1 << i))
> +				pl061_direction_output(&chip->gc, i,
> +						pdata->values & (1 << i));
> +			else
> +				pl061_direction_input(&chip->gc, i);
> +		}
>  
>  		irq_set_chip_and_handler(i + chip->irq_base, &pl061_irqchip,
>  					 handle_simple_irq);
> diff --git a/include/linux/amba/pl061.h b/include/linux/amba/pl061.h
> index 5ddd9ad..2412af9 100644
> --- a/include/linux/amba/pl061.h
> +++ b/include/linux/amba/pl061.h
> @@ -7,8 +7,7 @@ struct pl061_platform_data {
>  	unsigned	gpio_base;
>  
>  	/* number of the first IRQ.
> -	 * If the IRQ functionality in not desired this must be set to
> -	 * (unsigned) -1.
> +	 * If the IRQ functionality in not desired this must be set to NO_IRQ.
>  	 */
>  	unsigned	irq_base;
>  
> -- 
> 1.7.4.1
> 



More information about the linux-arm-kernel mailing list