[PATCH v8 11/24] gpio/omap: cleanup omap_gpio_mod_init function
Tarun Kanti DebBarma
tarun.kanti at ti.com
Wed Oct 5 04:33:00 EDT 2011
With register offsets now defined for respective OMAP versions we can get rid
of cpu_class_* checks. This function now has common initialization code for
all OMAP versions. Initialization specific to OMAP16xx has been moved within
omap16xx_gpio_init().
Signed-off-by: Tarun Kanti DebBarma <tarun.kanti at ti.com>
Signed-off-by: Charulatha V <charu at ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
Acked-by: Tony Lindgren <tony at atomide.com>
---
arch/arm/mach-omap1/gpio16xx.c | 35 +++++++++++++++++++-
drivers/gpio/gpio-omap.c | 71 +++++++++------------------------------
2 files changed, 51 insertions(+), 55 deletions(-)
diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c
index 46bb57a..86ac415 100644
--- a/arch/arm/mach-omap1/gpio16xx.c
+++ b/arch/arm/mach-omap1/gpio16xx.c
@@ -24,6 +24,9 @@
#define OMAP1610_GPIO4_BASE 0xfffbbc00
#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
+/* smart idle, enable wakeup */
+#define SYSCONFIG_WORD 0x14
+
/* mpu gpio */
static struct __initdata resource omap16xx_mpu_gpio_resources[] = {
{
@@ -218,12 +221,42 @@ static struct __initdata platform_device * omap16xx_gpio_dev[] = {
static int __init omap16xx_gpio_init(void)
{
int i;
+ void __iomem *base;
+ struct resource *res;
+ struct platform_device *pdev;
+ struct omap_gpio_platform_data *pdata;
if (!cpu_is_omap16xx())
return -EINVAL;
- for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++)
+ for (i = 0; i < ARRAY_SIZE(omap16xx_gpio_dev); i++) {
+ pdev = omap16xx_gpio_dev[i];
+ pdata = pdev->dev.platform_data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (unlikely(!res)) {
+ dev_err(&pdev->dev, "Invalid mem resource.\n");
+ return -ENODEV;
+ }
+
+ base = ioremap(res->start, resource_size(res));
+ if (unlikely(!base)) {
+ dev_err(&pdev->dev, "ioremap failed.\n");
+ return -ENOMEM;
+ }
+
+ __raw_writel(SYSCONFIG_WORD, base + OMAP1610_GPIO_SYSCONFIG);
+ iounmap(base);
+
+ /*
+ * Enable system clock for GPIO module.
+ * The CAM_CLK_CTRL *is* really the right place.
+ */
+ omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
+ ULPD_CAM_CLK_CTRL);
+
platform_device_register(omap16xx_gpio_dev[i]);
+ }
return 0;
}
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index e51804b..2a57d0b 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -605,7 +605,6 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
if (!(isr & 1))
continue;
-#ifdef CONFIG_ARCH_OMAP1
/*
* Some chips can't respond to both rising and falling
* at the same time. If this irq was requested with
@@ -615,7 +614,6 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
*/
if (bank->toggle_mask & (1 << gpio_index))
_toggle_gpio_edge_triggering(bank, gpio_index);
-#endif
generic_handle_irq(gpio_irq);
}
@@ -893,62 +891,24 @@ static void __init omap_gpio_show_rev(struct gpio_bank *bank)
*/
static struct lock_class_key gpio_lock_class;
-/* TODO: Cleanup cpu_is_* checks */
static void omap_gpio_mod_init(struct gpio_bank *bank)
{
- if (cpu_class_is_omap2()) {
- if (cpu_is_omap44xx()) {
- __raw_writel(0xffffffff, bank->base +
- OMAP4_GPIO_IRQSTATUSCLR0);
- __raw_writel(0x00000000, bank->base +
- OMAP4_GPIO_DEBOUNCENABLE);
- /* Initialize interface clk ungated, module enabled */
- __raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
- } else if (cpu_is_omap34xx()) {
- __raw_writel(0x00000000, bank->base +
- OMAP24XX_GPIO_IRQENABLE1);
- __raw_writel(0xffffffff, bank->base +
- OMAP24XX_GPIO_IRQSTATUS1);
- __raw_writel(0x00000000, bank->base +
- OMAP24XX_GPIO_DEBOUNCE_EN);
-
- /* Initialize interface clk ungated, module enabled */
- __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
- }
- } else if (cpu_class_is_omap1()) {
- if (bank_is_mpuio(bank)) {
- __raw_writew(0xffff, bank->base +
- OMAP_MPUIO_GPIO_MASKIT / bank->stride);
- mpuio_init(bank);
- }
- if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
- __raw_writew(0xffff, bank->base
- + OMAP1510_GPIO_INT_MASK);
- __raw_writew(0x0000, bank->base
- + OMAP1510_GPIO_INT_STATUS);
- }
- if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) {
- __raw_writew(0x0000, bank->base
- + OMAP1610_GPIO_IRQENABLE1);
- __raw_writew(0xffff, bank->base
- + OMAP1610_GPIO_IRQSTATUS1);
- __raw_writew(0x0014, bank->base
- + OMAP1610_GPIO_SYSCONFIG);
+ void __iomem *base = bank->base;
+ u32 l = 0xffffffff;
- /*
- * Enable system clock for GPIO module.
- * The CAM_CLK_CTRL *is* really the right place.
- */
- omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
- ULPD_CAM_CLK_CTRL);
- }
- if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
- __raw_writel(0xffffffff, bank->base
- + OMAP7XX_GPIO_INT_MASK);
- __raw_writel(0x00000000, bank->base
- + OMAP7XX_GPIO_INT_STATUS);
- }
+ if (bank->width == 16)
+ l = 0xffff;
+
+ if (bank_is_mpuio(bank)) {
+ __raw_writel(l, bank->base + bank->regs->irqenable);
+ return;
}
+
+ _gpio_rmw(base, bank->regs->irqenable, l, bank->regs->irqenable_inv);
+ _gpio_rmw(base, bank->regs->irqstatus, l,
+ bank->regs->irqenable_inv == false);
+ _gpio_rmw(base, bank->regs->irqenable, l, bank->regs->debounce_en != 0);
+ _gpio_rmw(base, bank->regs->irqenable, l, bank->regs->ctrl != 0);
}
static __init void
@@ -1099,6 +1059,9 @@ static int __devinit omap_gpio_probe(struct platform_device *pdev)
pm_runtime_enable(bank->dev);
pm_runtime_get_sync(bank->dev);
+ if (bank_is_mpuio(bank))
+ mpuio_init(bank);
+
omap_gpio_mod_init(bank);
omap_gpio_chip_init(bank);
omap_gpio_show_rev(bank);
--
1.7.0.4
More information about the linux-arm-kernel
mailing list