[PATCH 00/26] ARM: pxa specific randconfig fixes
Arnd Bergmann
arnd at arndb.de
Sat Oct 1 16:03:32 EDT 2011
Hi Eric (and others),
Here are lots of tiny bug fixes (and a few bigger ones)
for the pxa platform that I found by running 'make randconfig'.
Could you take a look at these and see if they make sense to
you? The majority is just for corner cases that we are not
generally interested in, except for making sure that
randconfig works, but some are regressions from a previously
working state or are for relevant configurations.
It would be nice if you could either give me an ok to put
all off them into the arm-soc tree for the coming merge window
or cherry-pick the ones that are good and send them back
to me in a pull request.
The series is also available in git at
git pull git://git.linaro.org/people/arnd/arm-soc.git randconfig/pxa
but I haven't added it to the for-next branch for now.
Arnd
Arnd Bergmann (26):
usb/gadget/pxa25x: is_vbus_present is gone
sound/pxa-zylonite: use a valid device for dev_err()
scsi/mvsas: use proper namespace for IRQ_* symbols
net/pxa168_eth: add missing include of interrupt.h
ARM: pxa: make zylonite_pxa*_init declaration match code
ARM: pxa: add missing header inclusions
ARM: pxa: mbxfb: disable broken debugfs code
ARM: pxa: move z2 to generic cpu_suspend
ARM: pxa: export symbols from pxa3xx-ulpi
ARM: pxa: allow selecting just one of TREO680/CENTRO
ARM: pxa: allow building palm27x without pxafb
ARM: pxa: pxa95x/saarb depends on pxa3xx code
ARM: pxa: use correct __iomem annotations
mtd: nand_h1900 never worked
irda/ficp: only works on some pxa models
ARM: pxa: CPU_PJ4 requires IWMMXT
ARM: pxa: pxa95x is incompatible with earlier pxa
ARM: pxa: MTD_XIP is not actually working any more
ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ
ARM: pxa: select FB_PXA on saar and tevorevb
ARM: pxa: select POWER_SUPPLY on raumfeld
ARM: pxa: only select SMC91x on xcep when networking is enabled
ARM: pxa: viper: select I2C_GPIO only when I2C is on
ARM: pxa: centro and treo680 need palm27x
ARM: pxa: eseries does not require FB
ARM: pxa: sharpsl pm needs SPI
arch/arm/Kconfig | 4 +-
arch/arm/include/asm/hardware/it8152.h | 2 +-
arch/arm/mach-mmp/clock.h | 8 ++--
arch/arm/mach-mmp/common.c | 4 +-
arch/arm/mach-mmp/include/mach/addr-map.h | 10 ++++-
arch/arm/mach-mmp/mmp2.c | 3 +-
arch/arm/mach-pxa/Kconfig | 48 ++++++++++++++++++------
arch/arm/mach-pxa/Makefile | 2 +-
arch/arm/mach-pxa/balloon3.c | 10 ++--
arch/arm/mach-pxa/cm-x2xx-pci.c | 2 +-
arch/arm/mach-pxa/cm-x2xx.c | 4 +-
arch/arm/mach-pxa/include/mach/addr-map.h | 8 ++--
arch/arm/mach-pxa/include/mach/balloon3.h | 2 +-
arch/arm/mach-pxa/include/mach/hardware.h | 9 ++--
arch/arm/mach-pxa/include/mach/lpd270.h | 4 +-
arch/arm/mach-pxa/include/mach/mtd-xip.h | 1 -
arch/arm/mach-pxa/include/mach/palm27x.h | 2 +-
arch/arm/mach-pxa/include/mach/palmtx.h | 6 +-
arch/arm/mach-pxa/include/mach/smemc.h | 2 +-
arch/arm/mach-pxa/include/mach/zeus.h | 4 +-
arch/arm/mach-pxa/include/mach/zylonite.h | 4 +-
arch/arm/mach-pxa/irq.c | 5 +-
arch/arm/mach-pxa/lpd270.c | 2 +-
arch/arm/mach-pxa/palmtreo.c | 8 ++++
arch/arm/mach-pxa/palmtx.c | 8 ++--
arch/arm/mach-pxa/pxa25x.c | 2 +-
arch/arm/mach-pxa/pxa27x.c | 2 +-
arch/arm/mach-pxa/pxa3xx-ulpi.c | 2 +
arch/arm/mach-pxa/pxa3xx.c | 2 +-
arch/arm/mach-pxa/saarb.c | 2 +
arch/arm/mach-pxa/z2.c | 3 +-
arch/arm/mach-pxa/zeus.c | 8 ++--
arch/arm/plat-pxa/gpio.c | 2 +-
arch/arm/plat-pxa/include/plat/mfp.h | 2 +-
arch/arm/plat-pxa/mfp.c | 4 +-
drivers/mtd/nand/Kconfig | 2 +-
drivers/net/irda/Kconfig | 2 +-
drivers/net/pxa168_eth.c | 1 +
drivers/pcmcia/pxa2xx_balloon3.c | 2 +-
drivers/scsi/mvsas/mv_94xx.c | 10 ++--
drivers/scsi/mvsas/mv_94xx.h | 58 ++++++++++++++--------------
drivers/usb/gadget/pxa25x_udc.h | 8 +---
drivers/video/Kconfig | 2 +-
drivers/video/mbx/Makefile | 2 +-
drivers/video/mbx/mbxfb.c | 6 +-
sound/soc/pxa/zylonite.c | 8 ++--
46 files changed, 166 insertions(+), 126 deletions(-)
--
1.7.5.4
More information about the linux-arm-kernel
mailing list