[PATCH] gpiolib/arches: Centralise bolierplate asm/gpio.h
Grant Likely
grant.likely at secretlab.ca
Tue Oct 25 04:33:01 EDT 2011
On Tue, Oct 25, 2011 at 09:33:32AM +0200, Mark Brown wrote:
> Rather than requiring architectures that use gpiolib but don't have any
> need to define anything custom to copy an asm/gpio.h provide a Kconfig
> symbol which architectures must select in order to include gpio.h and
> for other architectures just provide the trivial implementation directly.
>
> This makes it much easier to do gpiolib updates and is also a step towards
> making gpiolib APIs available on every architecture.
>
> Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
Acked-by: Grant Likely <grant.likely at secretlab.ca>
(not that I've actually tested this much yet; it should probably go
into a separate branch to marinate in linux-next for a bit without
impacting the other GPIO patches I've got queued.
g.
> ---
> arch/alpha/include/asm/gpio.h | 55 ------------------------------
> arch/arm/Kconfig | 1 +
> arch/avr32/Kconfig | 1 +
> arch/blackfin/Kconfig | 1 +
> arch/ia64/include/asm/gpio.h | 55 ------------------------------
> arch/m68k/Kconfig.cpu | 1 +
> arch/microblaze/include/asm/gpio.h | 53 -----------------------------
> arch/mips/Kconfig | 1 +
> arch/openrisc/include/asm/gpio.h | 65 ------------------------------------
> arch/powerpc/include/asm/gpio.h | 53 -----------------------------
> arch/sh/Kconfig | 1 +
> arch/sparc/include/asm/gpio.h | 36 --------------------
> arch/unicore32/Kconfig | 1 +
> arch/x86/include/asm/gpio.h | 53 -----------------------------
> arch/xtensa/include/asm/gpio.h | 56 -------------------------------
> drivers/gpio/Kconfig | 8 ++++
> include/linux/gpio.h | 34 +++++++++++++++++++
> 17 files changed, 49 insertions(+), 426 deletions(-)
> delete mode 100644 arch/alpha/include/asm/gpio.h
> delete mode 100644 arch/ia64/include/asm/gpio.h
> delete mode 100644 arch/microblaze/include/asm/gpio.h
> delete mode 100644 arch/openrisc/include/asm/gpio.h
> delete mode 100644 arch/powerpc/include/asm/gpio.h
> delete mode 100644 arch/sparc/include/asm/gpio.h
> delete mode 100644 arch/x86/include/asm/gpio.h
> delete mode 100644 arch/xtensa/include/asm/gpio.h
>
> diff --git a/arch/alpha/include/asm/gpio.h b/arch/alpha/include/asm/gpio.h
> deleted file mode 100644
> index 7dc6a63..0000000
> --- a/arch/alpha/include/asm/gpio.h
> +++ /dev/null
> @@ -1,55 +0,0 @@
> -/*
> - * Generic GPIO API implementation for Alpha.
> - *
> - * A stright copy of that for PowerPC which was:
> - *
> - * Copyright (c) 2007-2008 MontaVista Software, Inc.
> - *
> - * Author: Anton Vorontsov <avorontsov at ru.mvista.com>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - */
> -
> -#ifndef _ASM_ALPHA_GPIO_H
> -#define _ASM_ALPHA_GPIO_H
> -
> -#include <linux/errno.h>
> -#include <asm-generic/gpio.h>
> -
> -#ifdef CONFIG_GPIOLIB
> -
> -/*
> - * We don't (yet) implement inlined/rapid versions for on-chip gpios.
> - * Just call gpiolib.
> - */
> -static inline int gpio_get_value(unsigned int gpio)
> -{
> - return __gpio_get_value(gpio);
> -}
> -
> -static inline void gpio_set_value(unsigned int gpio, int value)
> -{
> - __gpio_set_value(gpio, value);
> -}
> -
> -static inline int gpio_cansleep(unsigned int gpio)
> -{
> - return __gpio_cansleep(gpio);
> -}
> -
> -static inline int gpio_to_irq(unsigned int gpio)
> -{
> - return __gpio_to_irq(gpio);
> -}
> -
> -static inline int irq_to_gpio(unsigned int irq)
> -{
> - return -EINVAL;
> -}
> -
> -#endif /* CONFIG_GPIOLIB */
> -
> -#endif /* _ASM_ALPHA_GPIO_H */
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 7e8ffe7..5e0446c 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -1,6 +1,7 @@
> config ARM
> bool
> default y
> + select ARCH_HAVE_CUSTOM_GPIO_H
> select HAVE_AOUT
> select HAVE_DMA_API_DEBUG
> select HAVE_IDE if PCI || ISA || PCMCIA
> diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
> index 197e96f..b2e3e58 100644
> --- a/arch/avr32/Kconfig
> +++ b/arch/avr32/Kconfig
> @@ -10,6 +10,7 @@ config AVR32
> select GENERIC_IRQ_PROBE
> select HARDIRQS_SW_RESEND
> select GENERIC_IRQ_SHOW
> + select ARCH_HAVE_CUSTOM_GPIO_H
> select ARCH_HAVE_NMI_SAFE_CMPXCHG
> help
> AVR32 is a high-performance 32-bit RISC microprocessor core,
> diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
> index c747629..2c13eef 100644
> --- a/arch/blackfin/Kconfig
> +++ b/arch/blackfin/Kconfig
> @@ -31,6 +31,7 @@ config BLACKFIN
> select HAVE_KERNEL_LZO if RAMKERNEL
> select HAVE_OPROFILE
> select HAVE_PERF_EVENTS
> + select ARCH_HAVE_CUSTOM_GPIO_H
> select ARCH_WANT_OPTIONAL_GPIOLIB
> select HAVE_GENERIC_HARDIRQS
> select GENERIC_ATOMIC64
> diff --git a/arch/ia64/include/asm/gpio.h b/arch/ia64/include/asm/gpio.h
> deleted file mode 100644
> index 590a20d..0000000
> --- a/arch/ia64/include/asm/gpio.h
> +++ /dev/null
> @@ -1,55 +0,0 @@
> -/*
> - * Generic GPIO API implementation for IA-64.
> - *
> - * A stright copy of that for PowerPC which was:
> - *
> - * Copyright (c) 2007-2008 MontaVista Software, Inc.
> - *
> - * Author: Anton Vorontsov <avorontsov at ru.mvista.com>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - */
> -
> -#ifndef _ASM_IA64_GPIO_H
> -#define _ASM_IA64_GPIO_H
> -
> -#include <linux/errno.h>
> -#include <asm-generic/gpio.h>
> -
> -#ifdef CONFIG_GPIOLIB
> -
> -/*
> - * We don't (yet) implement inlined/rapid versions for on-chip gpios.
> - * Just call gpiolib.
> - */
> -static inline int gpio_get_value(unsigned int gpio)
> -{
> - return __gpio_get_value(gpio);
> -}
> -
> -static inline void gpio_set_value(unsigned int gpio, int value)
> -{
> - __gpio_set_value(gpio, value);
> -}
> -
> -static inline int gpio_cansleep(unsigned int gpio)
> -{
> - return __gpio_cansleep(gpio);
> -}
> -
> -static inline int gpio_to_irq(unsigned int gpio)
> -{
> - return __gpio_to_irq(gpio);
> -}
> -
> -static inline int irq_to_gpio(unsigned int irq)
> -{
> - return -EINVAL;
> -}
> -
> -#endif /* CONFIG_GPIOLIB */
> -
> -#endif /* _ASM_IA64_GPIO_H */
> diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu
> index e632b2d..d4a818b 100644
> --- a/arch/m68k/Kconfig.cpu
> +++ b/arch/m68k/Kconfig.cpu
> @@ -21,6 +21,7 @@ config MCPU32
> config COLDFIRE
> bool
> select GENERIC_GPIO
> + select ARCH_HAVE_CUSTOM_GPIO_H
> select ARCH_REQUIRE_GPIOLIB
> select CPU_HAS_NO_BITFIELDS
> help
> diff --git a/arch/microblaze/include/asm/gpio.h b/arch/microblaze/include/asm/gpio.h
> deleted file mode 100644
> index 2b2c18b..0000000
> --- a/arch/microblaze/include/asm/gpio.h
> +++ /dev/null
> @@ -1,53 +0,0 @@
> -/*
> - * Generic GPIO API implementation for PowerPC.
> - *
> - * Copyright (c) 2007-2008 MontaVista Software, Inc.
> - *
> - * Author: Anton Vorontsov <avorontsov at ru.mvista.com>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - */
> -
> -#ifndef _ASM_MICROBLAZE_GPIO_H
> -#define _ASM_MICROBLAZE_GPIO_H
> -
> -#include <linux/errno.h>
> -#include <asm-generic/gpio.h>
> -
> -#ifdef CONFIG_GPIOLIB
> -
> -/*
> - * We don't (yet) implement inlined/rapid versions for on-chip gpios.
> - * Just call gpiolib.
> - */
> -static inline int gpio_get_value(unsigned int gpio)
> -{
> - return __gpio_get_value(gpio);
> -}
> -
> -static inline void gpio_set_value(unsigned int gpio, int value)
> -{
> - __gpio_set_value(gpio, value);
> -}
> -
> -static inline int gpio_cansleep(unsigned int gpio)
> -{
> - return __gpio_cansleep(gpio);
> -}
> -
> -static inline int gpio_to_irq(unsigned int gpio)
> -{
> - return __gpio_to_irq(gpio);
> -}
> -
> -static inline int irq_to_gpio(unsigned int irq)
> -{
> - return -EINVAL;
> -}
> -
> -#endif /* CONFIG_GPIOLIB */
> -
> -#endif /* _ASM_MICROBLAZE_GPIO_H */
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index 62b9677..567290c 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -8,6 +8,7 @@ config MIPS
> select HAVE_PERF_EVENTS
> select PERF_USE_VMALLOC
> select HAVE_ARCH_KGDB
> + select ARCH_HAVE_CUSTOM_GPIO_H
> select HAVE_FUNCTION_TRACER
> select HAVE_FUNCTION_TRACE_MCOUNT_TEST
> select HAVE_DYNAMIC_FTRACE
> diff --git a/arch/openrisc/include/asm/gpio.h b/arch/openrisc/include/asm/gpio.h
> deleted file mode 100644
> index 0b0d174..0000000
> --- a/arch/openrisc/include/asm/gpio.h
> +++ /dev/null
> @@ -1,65 +0,0 @@
> -/*
> - * OpenRISC Linux
> - *
> - * Linux architectural port borrowing liberally from similar works of
> - * others. All original copyrights apply as per the original source
> - * declaration.
> - *
> - * OpenRISC implementation:
> - * Copyright (C) 2003 Matjaz Breskvar <phoenix at bsemi.com>
> - * Copyright (C) 2010-2011 Jonas Bonn <jonas at southpole.se>
> - * et al.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - */
> -
> -#ifndef __ASM_OPENRISC_GPIO_H
> -#define __ASM_OPENRISC_GPIO_H
> -
> -#include <linux/errno.h>
> -#include <asm-generic/gpio.h>
> -
> -#ifdef CONFIG_GPIOLIB
> -
> -/*
> - * OpenRISC (or1k) does not have on-chip GPIO's so there is not really
> - * any standardized implementation that makes sense here. If passing
> - * through gpiolib becomes a bottleneck then it may make sense, on a
> - * case-by-case basis, to implement these inlined/rapid versions.
> - *
> - * Just call gpiolib.
> - */
> -static inline int gpio_get_value(unsigned int gpio)
> -{
> - return __gpio_get_value(gpio);
> -}
> -
> -static inline void gpio_set_value(unsigned int gpio, int value)
> -{
> - __gpio_set_value(gpio, value);
> -}
> -
> -static inline int gpio_cansleep(unsigned int gpio)
> -{
> - return __gpio_cansleep(gpio);
> -}
> -
> -/*
> - * Not implemented, yet.
> - */
> -static inline int gpio_to_irq(unsigned int gpio)
> -{
> - return -ENOSYS;
> -}
> -
> -static inline int irq_to_gpio(unsigned int irq)
> -{
> - return -EINVAL;
> -}
> -
> -#endif /* CONFIG_GPIOLIB */
> -
> -#endif /* __ASM_OPENRISC_GPIO_H */
> diff --git a/arch/powerpc/include/asm/gpio.h b/arch/powerpc/include/asm/gpio.h
> deleted file mode 100644
> index 38762ed..0000000
> --- a/arch/powerpc/include/asm/gpio.h
> +++ /dev/null
> @@ -1,53 +0,0 @@
> -/*
> - * Generic GPIO API implementation for PowerPC.
> - *
> - * Copyright (c) 2007-2008 MontaVista Software, Inc.
> - *
> - * Author: Anton Vorontsov <avorontsov at ru.mvista.com>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - */
> -
> -#ifndef __ASM_POWERPC_GPIO_H
> -#define __ASM_POWERPC_GPIO_H
> -
> -#include <linux/errno.h>
> -#include <asm-generic/gpio.h>
> -
> -#ifdef CONFIG_GPIOLIB
> -
> -/*
> - * We don't (yet) implement inlined/rapid versions for on-chip gpios.
> - * Just call gpiolib.
> - */
> -static inline int gpio_get_value(unsigned int gpio)
> -{
> - return __gpio_get_value(gpio);
> -}
> -
> -static inline void gpio_set_value(unsigned int gpio, int value)
> -{
> - __gpio_set_value(gpio, value);
> -}
> -
> -static inline int gpio_cansleep(unsigned int gpio)
> -{
> - return __gpio_cansleep(gpio);
> -}
> -
> -static inline int gpio_to_irq(unsigned int gpio)
> -{
> - return __gpio_to_irq(gpio);
> -}
> -
> -static inline int irq_to_gpio(unsigned int irq)
> -{
> - return -EINVAL;
> -}
> -
> -#endif /* CONFIG_GPIOLIB */
> -
> -#endif /* __ASM_POWERPC_GPIO_H */
> diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
> index ff9177c..d00e11a 100644
> --- a/arch/sh/Kconfig
> +++ b/arch/sh/Kconfig
> @@ -11,6 +11,7 @@ config SUPERH
> select HAVE_DMA_ATTRS
> select HAVE_IRQ_WORK
> select HAVE_PERF_EVENTS
> + select ARCH_HAVE_CUSTOM_GPIO_H
> select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
> select PERF_USE_VMALLOC
> select HAVE_KERNEL_GZIP
> diff --git a/arch/sparc/include/asm/gpio.h b/arch/sparc/include/asm/gpio.h
> deleted file mode 100644
> index a0e3ac0..0000000
> --- a/arch/sparc/include/asm/gpio.h
> +++ /dev/null
> @@ -1,36 +0,0 @@
> -#ifndef __ASM_SPARC_GPIO_H
> -#define __ASM_SPARC_GPIO_H
> -
> -#include <linux/errno.h>
> -#include <asm-generic/gpio.h>
> -
> -#ifdef CONFIG_GPIOLIB
> -
> -static inline int gpio_get_value(unsigned int gpio)
> -{
> - return __gpio_get_value(gpio);
> -}
> -
> -static inline void gpio_set_value(unsigned int gpio, int value)
> -{
> - __gpio_set_value(gpio, value);
> -}
> -
> -static inline int gpio_cansleep(unsigned int gpio)
> -{
> - return __gpio_cansleep(gpio);
> -}
> -
> -static inline int gpio_to_irq(unsigned int gpio)
> -{
> - return -ENOSYS;
> -}
> -
> -static inline int irq_to_gpio(unsigned int irq)
> -{
> - return -EINVAL;
> -}
> -
> -#endif /* CONFIG_GPIOLIB */
> -
> -#endif /* __ASM_SPARC_GPIO_H */
> diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
> index e57dcce..7bdc7c6 100644
> --- a/arch/unicore32/Kconfig
> +++ b/arch/unicore32/Kconfig
> @@ -8,6 +8,7 @@ config UNICORE32
> select HAVE_KERNEL_BZIP2
> select HAVE_KERNEL_LZO
> select HAVE_KERNEL_LZMA
> + select ARCH_HAVE_CUSTOM_GPIO_H
> select GENERIC_FIND_FIRST_BIT
> select GENERIC_IRQ_PROBE
> select GENERIC_IRQ_SHOW
> diff --git a/arch/x86/include/asm/gpio.h b/arch/x86/include/asm/gpio.h
> deleted file mode 100644
> index 91d915a..0000000
> --- a/arch/x86/include/asm/gpio.h
> +++ /dev/null
> @@ -1,53 +0,0 @@
> -/*
> - * Generic GPIO API implementation for x86.
> - *
> - * Derived from the generic GPIO API for powerpc:
> - *
> - * Copyright (c) 2007-2008 MontaVista Software, Inc.
> - *
> - * Author: Anton Vorontsov <avorontsov at ru.mvista.com>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - */
> -
> -#ifndef _ASM_X86_GPIO_H
> -#define _ASM_X86_GPIO_H
> -
> -#include <asm-generic/gpio.h>
> -
> -#ifdef CONFIG_GPIOLIB
> -
> -/*
> - * Just call gpiolib.
> - */
> -static inline int gpio_get_value(unsigned int gpio)
> -{
> - return __gpio_get_value(gpio);
> -}
> -
> -static inline void gpio_set_value(unsigned int gpio, int value)
> -{
> - __gpio_set_value(gpio, value);
> -}
> -
> -static inline int gpio_cansleep(unsigned int gpio)
> -{
> - return __gpio_cansleep(gpio);
> -}
> -
> -static inline int gpio_to_irq(unsigned int gpio)
> -{
> - return __gpio_to_irq(gpio);
> -}
> -
> -static inline int irq_to_gpio(unsigned int irq)
> -{
> - return -EINVAL;
> -}
> -
> -#endif /* CONFIG_GPIOLIB */
> -
> -#endif /* _ASM_X86_GPIO_H */
> diff --git a/arch/xtensa/include/asm/gpio.h b/arch/xtensa/include/asm/gpio.h
> deleted file mode 100644
> index a8c9fc4..0000000
> --- a/arch/xtensa/include/asm/gpio.h
> +++ /dev/null
> @@ -1,56 +0,0 @@
> -/*
> - * Generic GPIO API implementation for xtensa.
> - *
> - * Stolen from x86, which is derived from the generic GPIO API for powerpc:
> - *
> - * Copyright (c) 2007-2008 MontaVista Software, Inc.
> - *
> - * Author: Anton Vorontsov <avorontsov at ru.mvista.com>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - */
> -
> -#ifndef _ASM_XTENSA_GPIO_H
> -#define _ASM_XTENSA_GPIO_H
> -
> -#include <asm-generic/gpio.h>
> -
> -#ifdef CONFIG_GPIOLIB
> -
> -/*
> - * Just call gpiolib.
> - */
> -static inline int gpio_get_value(unsigned int gpio)
> -{
> - return __gpio_get_value(gpio);
> -}
> -
> -static inline void gpio_set_value(unsigned int gpio, int value)
> -{
> - __gpio_set_value(gpio, value);
> -}
> -
> -static inline int gpio_cansleep(unsigned int gpio)
> -{
> - return __gpio_cansleep(gpio);
> -}
> -
> -static inline int gpio_to_irq(unsigned int gpio)
> -{
> - return __gpio_to_irq(gpio);
> -}
> -
> -/*
> - * Not implemented, yet.
> - */
> -static inline int irq_to_gpio(unsigned int irq)
> -{
> - return -EINVAL;
> -}
> -
> -#endif /* CONFIG_GPIOLIB */
> -
> -#endif /* _ASM_XTENSA_GPIO_H */
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index a107d44..ef920a2 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -2,6 +2,14 @@
> # GPIO infrastructure and drivers
> #
>
> +config ARCH_HAVE_CUSTOM_GPIO_H
> + bool
> + help
> + Selecting this config option from the architecture Kconfig allows
> + the architecture to provide a custom asm/gpio.h implementation
> + overriding the default implementations. New uses of this are
> + strongly discouraged.
> +
> config ARCH_WANT_OPTIONAL_GPIOLIB
> bool
> help
> diff --git a/include/linux/gpio.h b/include/linux/gpio.h
> index 38ac48b..3149f68 100644
> --- a/include/linux/gpio.h
> +++ b/include/linux/gpio.h
> @@ -1,6 +1,8 @@
> #ifndef __LINUX_GPIO_H
> #define __LINUX_GPIO_H
>
> +#include <linux/errno.h>
> +
> /* see Documentation/gpio.txt */
>
> /* make these flag values available regardless of GPIO kconfig options */
> @@ -27,7 +29,39 @@ struct gpio {
> };
>
> #ifdef CONFIG_GENERIC_GPIO
> +
> +#ifdef CONFIG_ARCH_HAVE_CUSTOM_GPIO_H
> #include <asm/gpio.h>
> +#else
> +
> +#include <asm-generic/gpio.h>
> +
> +static inline int gpio_get_value(unsigned int gpio)
> +{
> + return __gpio_get_value(gpio);
> +}
> +
> +static inline void gpio_set_value(unsigned int gpio, int value)
> +{
> + __gpio_set_value(gpio, value);
> +}
> +
> +static inline int gpio_cansleep(unsigned int gpio)
> +{
> + return __gpio_cansleep(gpio);
> +}
> +
> +static inline int gpio_to_irq(unsigned int gpio)
> +{
> + return __gpio_to_irq(gpio);
> +}
> +
> +static inline int irq_to_gpio(unsigned int irq)
> +{
> + return -EINVAL;
> +}
> +
> +#endif
>
> #else
>
> --
> 1.7.6.3
>
More information about the linux-arm-kernel
mailing list