[PATCH 4/6] mach-ux500: export System-on-Chip information ux500 via sysfs
Lee Jones
lee.jones at linaro.org
Mon Oct 17 07:52:56 EDT 2011
Here we make use of the new System-On-Chip bus driver to export
vital SoC information out to userspace via sysfs. This patch
provides a data structure of strings to populate the base
nodes found in:
/sys/devices/soc[0|1|2|...]/[family|machine|revision|soc_id].
It also adds one more node as requested by ST-Ericsson.
'process' depicts the way in which the silicon was manufactured.
Signed-off-by: Lee Jones <lee.jones at linaro.org>
---
arch/arm/mach-ux500/Kconfig | 1 +
arch/arm/mach-ux500/cpu-db5500.c | 32 +++++++++---
arch/arm/mach-ux500/cpu-db8500.c | 36 ++++++++++---
arch/arm/mach-ux500/cpu.c | 67 ++++++++++++++++++++++++
arch/arm/mach-ux500/include/mach/db8500-regs.h | 3 +
arch/arm/mach-ux500/include/mach/setup.h | 6 ++-
6 files changed, 128 insertions(+), 17 deletions(-)
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 86188b2..1c462ed 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -27,6 +27,7 @@ config MACH_U8500
bool "U8500 Development platform"
depends on UX500_SOC_DB8500
select TPS6105X
+ select SOC_BUS
help
Include support for the mop500 development platform.
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 3995284..6bbc9da 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -220,17 +220,33 @@ static int usb_db5500_tx_dma_cfg[] = {
DB5500_DMA_DEV38_USB_OTG_OEP_8
};
-struct device* __init u5500_init_devices(void)
+static const char *db5500_read_soc_id(void)
{
- /* FIXME: First parameter to be a real parent. */
- db5500_add_gpios(NULL);
- db5500_dma_init(NULL);
- db5500_add_rtc(NULL);
- db5500_add_usb(NULL, usb_db5500_rx_dma_cfg, usb_db5500_tx_dma_cfg);
+ return kasprintf(GFP_KERNEL, "u5500 currently unsupported\n");
+}
+
+static struct device * __init db5500_soc_device_init(void)
+{
+ const char *soc_id = db5500_read_soc_id();
+
+ return ux500_soc_device_init(soc_id);
+}
+
+struct device * __init u5500_init_devices(void)
+{
+ struct device *parent;
+ int i;
+
+ parent = db5500_soc_device_init();
+
+ db5500_add_gpios(parent);
+ db5500_dma_init(parent);
+ db5500_add_rtc(parent);
+ db5500_add_usb(parent, usb_db5500_rx_dma_cfg,
+ usb_db5500_tx_dma_cfg);
platform_add_devices(db5500_platform_devs,
ARRAY_SIZE(db5500_platform_devs));
- /* FIXME: Return value to be a real parent. */
- return NULL;
+ return parent;
}
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 375171e..c83440b 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -24,6 +24,7 @@
#include <mach/setup.h>
#include <mach/devices.h>
#include <mach/usb.h>
+#include <mach/db8500-regs.h>
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
@@ -188,22 +189,43 @@ static int usb_db8500_tx_dma_cfg[] = {
DB8500_DMA_DEV39_USB_OTG_OEP_8
};
+static const char *db8500_read_soc_id(void)
+{
+ void __iomem *uid = __io_address(U8500_BB_UID_BASE);
+
+ return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
+ readl((u32 *)uid+1),
+ readl((u32 *)uid+1), readl((u32 *)uid+2),
+ readl((u32 *)uid+3), readl((u32 *)uid+4));
+}
+
+static struct device * __init db8500_soc_device_init(void)
+{
+ const char *soc_id = db8500_read_soc_id();
+
+ return ux500_soc_device_init(soc_id);
+}
+
/*
* This function is called from the board init
*/
-struct device* __init u8500_init_devices(void)
+struct device * __init u8500_init_devices(void)
{
+ struct device *parent;
+ int i;
+
+ parent = db8500_soc_device_init();
+
if (cpu_is_u8500ed())
dma40_u8500ed_fixup();
- /* FIXME: First parameter to be a real parent. */
- db8500_add_rtc(NULL);
- db8500_add_gpios(NULL);
- db8500_add_usb(NULL, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
+ db8500_add_rtc(parent);
+ db8500_add_gpios(parent);
+ db8500_add_usb(parent, usb_db8500_rx_dma_cfg,
+ usb_db8500_tx_dma_cfg);
platform_device_register_simple("cpufreq-u8500", -1, NULL, 0);
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
- /* FIXME: Return value to be a real parent. */
- return NULL;
+ return parent;
}
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index b457799..3315436 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -2,6 +2,7 @@
* Copyright (C) ST-Ericsson SA 2010
*
* Author: Rabin Vincent <rabin.vincent at stericsson.com> for ST-Ericsson
+ * Author: Lee Jones <lee.jones at linaro.org> for ST-Ericsson
* License terms: GNU General Public License (GPL) version 2
*/
@@ -10,6 +11,9 @@
#include <linux/clk.h>
#include <linux/mfd/db8500-prcmu.h>
#include <linux/mfd/db5500-prcmu.h>
+#include <linux/sys_soc.h>
+#include <linux/err.h>
+#include <linux/slab.h>
#include <asm/hardware/gic.h>
#include <asm/mach/map.h>
@@ -77,3 +81,66 @@ static void __init ux500_timer_init(void)
struct sys_timer ux500_timer = {
.init = ux500_timer_init,
};
+
+static const char * __init ux500_get_machine(void)
+{
+ return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
+}
+
+static const char * __init ux500_get_family(void)
+{
+ return kasprintf(GFP_KERNEL, "ux500");
+}
+
+static const char * __init ux500_get_revision(void)
+{
+ unsigned int rev = dbx500_revision();
+
+ if (rev == 0x01)
+ return kasprintf(GFP_KERNEL, "%s", "ED");
+ else if (rev >= 0xA0)
+ return kasprintf(GFP_KERNEL, "%d.%d",
+ (rev >> 4) - 0xA + 1, rev & 0xf);
+
+ return kasprintf(GFP_KERNEL, "%s", "Unknown");
+}
+
+static ssize_t __init ux500_get_process(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ if (dbx500_id.process == 0x00)
+ return sprintf(buf, "Standard\n");
+
+ return sprintf(buf, "%02xnm\n", dbx500_id.process);
+}
+
+static void __init soc_info_populate(struct soc_device_attribute *soc_dev_attr,
+ const char *soc_id)
+{
+ soc_dev_attr->soc_id = soc_id;
+ soc_dev_attr->machine = ux500_get_machine();
+ soc_dev_attr->family = ux500_get_family();
+ soc_dev_attr->revision = ux500_get_revision();
+}
+
+struct device_attribute ux500_soc_attr =
+ __ATTR(process, S_IRUGO, ux500_get_process, NULL);
+
+struct device * __init ux500_soc_device_init(const char *soc_id)
+{
+ struct device *parent;
+ struct soc_device_attribute *soc_dev_attr;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return ERR_PTR(-ENOMEM);
+
+ soc_info_populate(soc_dev_attr, soc_id);
+
+ parent = soc_device_register(soc_dev_attr);
+ if (!IS_ERR_OR_NULL(parent))
+ device_create_file(parent, &ux500_soc_attr);
+
+ return parent;
+}
diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h
index 0499971..22a9a5d 100644
--- a/arch/arm/mach-ux500/include/mach/db8500-regs.h
+++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h
@@ -166,4 +166,7 @@
#define U8500_MODEM_BASE 0xe000000
#define U8500_APE_BASE 0x6000000
+/* SoC identification number information */
+#define U8500_BB_UID_BASE (U8500_BACKUPRAM1_BASE + 0xFC0)
+
#endif
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 88e8d6b..74b43bb 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -18,8 +18,8 @@ void __init ux500_map_io(void);
extern void __init u5500_map_io(void);
extern void __init u8500_map_io(void);
-extern void __init u5500_init_devices(void);
-extern void __init u8500_init_devices(void);
+extern struct device * __init u5500_init_devices(void);
+extern struct device * __init u8500_init_devices(void);
extern void __init ux500_init_irq(void);
@@ -27,6 +27,8 @@ extern void __init u5500_sdi_init(struct device *parent);
extern void __init db5500_dma_init(struct device *parent);
+extern struct device *ux500_soc_device_init(const char *soc_id);
+
/* We re-use nomadik_timer for this platform */
extern void nmdk_timer_init(void);
--
1.7.5.4
More information about the linux-arm-kernel
mailing list