[PATCH 4/4] ARM: OMAP: Map SRAM later on with ioremap_exec()
Tony Lindgren
tony at atomide.com
Wed Oct 5 18:13:20 EDT 2011
* Nicolas Pitre <nico at fluxnic.net> [111004 17:34]:
> On Tue, 4 Oct 2011, Tony Lindgren wrote:
>
> > This allows us to remove omap hacks for map_io.
> >
> > Signed-off-by: Tony Lindgren <tony at atomide.com>
>
> Nice cleanup.
>
> Acked-by: Nicolas Pitre <nicolas.pitre at linaro.org>
This one needed minor changes for the omap1 omap_sram_init
call. Updated patch below, still assuming I have your ack
for this one too.
Tony
From: Tony Lindgren <tony at atomide.com>
Date: Tue, 4 Oct 2011 13:52:57 -0700
Subject: [PATCH] ARM: OMAP: Map SRAM later on with ioremap_exec()
This allows us to remove omap hacks for map_io.
Acked-by: Nicolas Pitre <nicolas.pitre at linaro.org>
Signed-off-by: Tony Lindgren <tony at atomide.com>
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 36f26c3..38e1142 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -21,6 +21,7 @@
#include <mach/hardware.h>
#include <asm/mach/map.h>
+#include <plat/common.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mux.h>
@@ -291,6 +292,8 @@ static int __init omap1_init_devices(void)
if (!cpu_class_is_omap1())
return -ENODEV;
+ omap_sram_init();
+
/* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index a16aab7..8140a4e 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -21,7 +21,6 @@
#include "clock.h"
extern void omap_check_revision(void);
-extern void omap_sram_init(void);
/*
* The machine specific code may provide the extra mapping besides the
@@ -133,7 +132,6 @@ void omap1_init_early(void)
*/
omap1_clk_init();
omap1_mux_init();
- omap_sram_init();
}
/*
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 31c5f4d..fec50d8 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -35,8 +35,8 @@
#include "clock2xxx.h"
#include "clock3xxx.h"
#include "clock44xx.h"
-#include "io.h"
+#include <plat/common.h>
#include <plat/omap-pm.h>
#include "voltage.h"
#include "powerdomain.h"
@@ -240,22 +240,11 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
};
#endif
-static void __init _omap2_map_common_io(void)
-{
- /* Normally devicemaps_init() would flush caches and tlb after
- * mdesc->map_io(), but we must also do it here because of the CPU
- * revision check below.
- */
- local_flush_tlb_all();
- flush_cache_all();
-}
-
#ifdef CONFIG_SOC_OMAP2420
void __init omap242x_map_common_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -264,7 +253,6 @@ void __init omap243x_map_common_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -272,7 +260,6 @@ void __init omap243x_map_common_io(void)
void __init omap34xx_map_common_io(void)
{
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -280,7 +267,6 @@ void __init omap34xx_map_common_io(void)
void __init omapti816x_map_common_io(void)
{
iotable_init(omapti816x_io_desc, ARRAY_SIZE(omapti816x_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -288,7 +274,6 @@ void __init omapti816x_map_common_io(void)
void __init omap44xx_map_common_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
- _omap2_map_common_io();
}
#endif
@@ -337,7 +322,6 @@ void __iomem *omap_irq_base;
static void __init omap_common_init_early(void)
{
omap2_check_revision();
- omap_sram_init();
omap2xxx_voltagedomains_init();
omap2xxx_voltagedomains_init();
omap3xxx_voltagedomains_init();
@@ -453,11 +437,12 @@ void __init omap4430_init_early(void)
void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
+ omap_sram_init();
+
if (cpu_is_omap24xx() || omap3_has_sdrc()) {
omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
_omap2_init_reprogram_sdrc();
}
-
}
/*
diff --git a/arch/arm/mach-omap2/io.h b/arch/arm/mach-omap2/io.h
index fd230c6..e69de29 100644
--- a/arch/arm/mach-omap2/io.h
+++ b/arch/arm/mach-omap2/io.h
@@ -1,7 +0,0 @@
-
-#ifndef __MACH_OMAP2_IO_H__
-#define __MACH_OMAP2_IO_H__
-
-extern int __init omap_sram_init(void);
-
-#endif /* __MACH_OMAP2_IO_H__ */
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
index 5eac355..ed85720 100644
--- a/arch/arm/plat-omap/include/plat/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -55,6 +55,8 @@ void am35xx_init_early(void);
void ti816x_init_early(void);
void omap4430_init_early(void);
+void omap_sram_init(void);
+
/*
* IO bases for various OMAP processors
* Except the tap base, rest all the io bases
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 3c8aa44..8b28664 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -38,16 +38,9 @@
#endif
#define OMAP1_SRAM_PA 0x20000000
-#define OMAP1_SRAM_VA VMALLOC_END
#define OMAP2_SRAM_PUB_PA (OMAP2_SRAM_PA + 0xf800)
-#define OMAP2_SRAM_VA 0xfe400000
-#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
-#define OMAP3_SRAM_VA 0xfe400000
#define OMAP3_SRAM_PUB_PA (OMAP3_SRAM_PA + 0x8000)
-#define OMAP3_SRAM_PUB_VA (OMAP3_SRAM_VA + 0x8000)
-#define OMAP4_SRAM_VA 0xfe400000
#define OMAP4_SRAM_PUB_PA (OMAP4_SRAM_PA + 0x4000)
-#define OMAP4_SRAM_PUB_VA (OMAP4_SRAM_VA + 0x4000)
#if defined(CONFIG_ARCH_OMAP2PLUS)
#define SRAM_BOOTLOADER_SZ 0x00
@@ -70,9 +63,9 @@
#define ROUND_DOWN(value,boundary) ((value) & (~((boundary)-1)))
static unsigned long omap_sram_start;
-static unsigned long omap_sram_base;
+static void __iomem *omap_sram_base;
static unsigned long omap_sram_size;
-static unsigned long omap_sram_ceil;
+static void __iomem *omap_sram_ceil;
/*
* Depending on the target RAMFS firewall setup, the public usable amount of
@@ -112,7 +105,6 @@ static void __init omap_detect_sram(void)
if (cpu_class_is_omap2()) {
if (is_sram_locked()) {
if (cpu_is_omap34xx()) {
- omap_sram_base = OMAP3_SRAM_PUB_VA;
omap_sram_start = OMAP3_SRAM_PUB_PA;
if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) ||
(omap_type() == OMAP2_DEVICE_TYPE_SEC)) {
@@ -121,25 +113,20 @@ static void __init omap_detect_sram(void)
omap_sram_size = 0x8000; /* 32K */
}
} else if (cpu_is_omap44xx()) {
- omap_sram_base = OMAP4_SRAM_PUB_VA;
omap_sram_start = OMAP4_SRAM_PUB_PA;
omap_sram_size = 0xa000; /* 40K */
} else {
- omap_sram_base = OMAP2_SRAM_PUB_VA;
omap_sram_start = OMAP2_SRAM_PUB_PA;
omap_sram_size = 0x800; /* 2K */
}
} else {
if (cpu_is_omap34xx()) {
- omap_sram_base = OMAP3_SRAM_VA;
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
} else if (cpu_is_omap44xx()) {
- omap_sram_base = OMAP4_SRAM_VA;
omap_sram_start = OMAP4_SRAM_PA;
omap_sram_size = 0xe000; /* 56K */
} else {
- omap_sram_base = OMAP2_SRAM_VA;
omap_sram_start = OMAP2_SRAM_PA;
if (cpu_is_omap242x())
omap_sram_size = 0xa0000; /* 640K */
@@ -148,7 +135,6 @@ static void __init omap_detect_sram(void)
}
}
} else {
- omap_sram_base = OMAP1_SRAM_VA;
omap_sram_start = OMAP1_SRAM_PA;
if (cpu_is_omap7xx())
@@ -165,24 +151,14 @@ static void __init omap_detect_sram(void)
omap_sram_size = 0x4000;
}
}
-
- omap_sram_ceil = omap_sram_base + omap_sram_size;
}
-static struct map_desc omap_sram_io_desc[] __initdata = {
- { /* .length gets filled in at runtime */
- .virtual = OMAP1_SRAM_VA,
- .pfn = __phys_to_pfn(OMAP1_SRAM_PA),
- .type = MT_MEMORY
- }
-};
-
/*
* Note that we cannot use ioremap for SRAM, as clock init needs SRAM early.
*/
static void __init omap_map_sram(void)
{
- unsigned long base;
+ int cached = 1;
if (omap_sram_size == 0)
return;
@@ -195,28 +171,18 @@ static void __init omap_map_sram(void)
* the ARM may attempt to write cache lines back to SDRAM
* which will cause the system to hang.
*/
- omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
+ cached = 0;
}
- omap_sram_io_desc[0].virtual = omap_sram_base;
- base = omap_sram_start;
- base = ROUND_DOWN(base, PAGE_SIZE);
- omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
- omap_sram_io_desc[0].length = ROUND_DOWN(omap_sram_size, PAGE_SIZE);
- iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
-
- pr_info("SRAM: Mapped pa 0x%08llx to va 0x%08lx size: 0x%lx\n",
- (long long) __pfn_to_phys(omap_sram_io_desc[0].pfn),
- omap_sram_io_desc[0].virtual,
- omap_sram_io_desc[0].length);
+ omap_sram_start = ROUND_DOWN(omap_sram_start, PAGE_SIZE);
+ omap_sram_base = __arm_ioremap_exec(omap_sram_start, omap_sram_size,
+ cached);
+ if (!omap_sram_base) {
+ pr_err("SRAM: Could not map\n");
+ return;
+ }
- /*
- * Normally devicemaps_init() would flush caches and tlb after
- * mdesc->map_io(), but since we're called from map_io(), we
- * must do it here.
- */
- local_flush_tlb_all();
- flush_cache_all();
+ omap_sram_ceil = omap_sram_base + omap_sram_size;
/*
* Looks like we need to preserve some bootloader code at the
@@ -235,13 +201,18 @@ static void __init omap_map_sram(void)
*/
void *omap_sram_push_address(unsigned long size)
{
- if (size > (omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ))) {
+ unsigned long available, new_ceil = (unsigned long)omap_sram_ceil;
+
+ available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ);
+
+ if (size > available) {
pr_err("Not enough space in SRAM\n");
return NULL;
}
- omap_sram_ceil -= size;
- omap_sram_ceil = ROUND_DOWN(omap_sram_ceil, FNCPY_ALIGN);
+ new_ceil -= size;
+ new_ceil = ROUND_DOWN(new_ceil, FNCPY_ALIGN);
+ omap_sram_ceil = IOMEM(new_ceil);
return (void *)omap_sram_ceil;
}
More information about the linux-arm-kernel
mailing list