[alsa-devel] [PATCH v3 0/3] ARM: mxs: add recording support for saif

[Dong Aisheng]

2011/9/26 Dong Aisheng <b29396 at freescale.com>:
> Changes since v2:
>  * separate clkmux code into another patch according to Uwe
>  * add lock according to Wolfram
>  * Other minus fixes suggested by Uwe and Wolfram.
>  * remove Wolfram's fix saif clock setting patch which is in v2 series
>   since Wolfram will reform the clock code and send it out himself.
>   For test purpose, user still needs that patch. People can get it
>   from v2 series.
>   The patch is:
>   [PATCH v2 3/3] arm: mxs: disable clock-gates when setting saif-clocks
>
> The patches are based on imx-features branch since commit:
> f4f01e31835f.
>
> Changes since v1:
> The main changes are move mach-specific code(clkmux in DIGCTL) from
> saif driver to mach-specific layer based on Wolfram's suggestion.
>
> Note that the last patch is a RFC patch and sent out for testing
> since without that patch the saif may not work.
>
> Dong Aisheng (3):
>  ARM: mxs: add saif clkmux functions
>  ARM: mx28evk: add platform data for saif
>  ARM: mx28evk: set a initial clock rate for saif

Any comments for this?

Regards
Dong Aisheng

>  arch/arm/mach-mxs/clock-mx28.c                  |   67 +++++++++++++++++++++++
>  arch/arm/mach-mxs/devices-mx28.h                |    3 +-
>  arch/arm/mach-mxs/devices/platform-mxs-saif.c   |    5 +-
>  arch/arm/mach-mxs/include/mach/common.h         |    2 +
>  arch/arm/mach-mxs/include/mach/devices-common.h |    4 +-
>  arch/arm/mach-mxs/include/mach/digctl.h         |   21 +++++++
>  arch/arm/mach-mxs/mach-mx28evk.c                |   16 +++++-
>  7 files changed, 112 insertions(+), 6 deletions(-)
>  create mode 100644 arch/arm/mach-mxs/include/mach/digctl.h
>
>
> _______________________________________________
> Alsa-devel mailing list
> Alsa-devel at alsa-project.org
> http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
>