[PATCH 17/26] ARM: pxa: pxa95x is incompatible with earlier pxa
Haojian Zhuang
haojian.zhuang at gmail.com
Fri Oct 7 22:57:11 EDT 2011
On Sun, Oct 2, 2011 at 4:03 AM, Arnd Bergmann <arnd at arndb.de> wrote:
> We cannot support ARMv5 and ARMv7 based boards in a single kernel,
> so introduce a new option in mach-pxa to select between the two.
>
> The PJ4 (ARMv7) based boards are now only visible when
> CONFIG_ARCH_PXA_V7 is set, the other boards are only visible
> when it's not set.
>
> Signed-off-by: Arnd Bergmann <arnd at arndb.de>
> ---
> arch/arm/mach-pxa/Kconfig | 31 ++++++++++++++++++++++---------
> 1 files changed, 22 insertions(+), 9 deletions(-)
>
> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
> index cd19309..bb310d0 100644
> --- a/arch/arm/mach-pxa/Kconfig
> +++ b/arch/arm/mach-pxa/Kconfig
> @@ -2,6 +2,27 @@ if ARCH_PXA
>
> menu "Intel PXA2xx/PXA3xx Implementations"
>
> +config ARCH_PXA_V7
> + bool "ARMv7 (PXA95x) based systems"
> +
> +if ARCH_PXA_V7
> +comment "Marvell Dev Platforms (sorted by hardware release time)"
> +config MACH_TAVOREVB3
> + bool "PXA95x Development Platform (aka TavorEVB III)"
> + select CPU_PXA955
> +
> +config MACH_SAARB
> + bool "PXA955 Handheld Platform (aka SAARB)"
> + select CPU_PXA955
> +endif
> +
> +config PXA_V7_MACH_AUTO
> + def_bool y
> + depends on ARCH_PXA_V7
> + depends on !MACH_SAARB
> + select MACH_TAVOREVB3
> +
Could we avoid to use PXA_V7_MACH_AUTO? I think the better way is
defining a new ARCH (ARCH_PXA95X or something else), and sharing the
code in arch/arm/mach-pxa. I think that it's easy to implement.
How about you, Russell & Eric?
> +if !ARCH_PXA_V7
> comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
>
> config ARCH_LUBBOCK
> @@ -41,19 +62,11 @@ config MACH_TAVOREVB
> select PXA3xx
> select CPU_PXA930
>
> -config MACH_TAVOREVB3
> - bool "PXA95x Development Platform (aka TavorEVB III)"
> - select CPU_PXA950
> -
> config MACH_SAAR
> bool "PXA930 Handheld Platform (aka SAAR)"
> select PXA3xx
> select CPU_PXA930
>
> -config MACH_SAARB
> - bool "PXA955 Handheld Platform (aka SAARB)"
> - select CPU_PXA955
> -
> comment "Third Party Dev Platforms (sorted by vendor name)"
>
> config ARCH_PXA_IDP
> @@ -598,7 +611,7 @@ config MACH_ZIPIT2
> bool "Zipit Z2 Handheld"
> select PXA27x
> select HAVE_PWM
> -
> +endif
> endmenu
>
> config PXA25x
> --
> 1.7.5.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
More information about the linux-arm-kernel
mailing list