November 2010 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Nov 1 01:01:33 EDT 2010
Ending: Tue Nov 30 23:02:18 EST 2010
Messages: 2795

• [patch v3 01/10] efikamx: read board id   Arnaud Patard (Rtp)
• [patch v4 01/10] efikamx: read board id   Arnaud Patard (Rtp)
• [patch v4 06/10] efikamx: add leds support   Arnaud Patard (Rtp)
• [patch 1/1] imx: fix iomux v3   Arnaud Patard (Rtp)
• [patch 1/1] Fix ixp4xx build failure of some modules   Arnaud Patard (Rtp)
• w1-gpio oops   Arnaud Patard (Rtp)
• [patch 1/1] iMX51: introduce MX51_GPIO_NR   Arnaud Patard (Rtp)
• [patch 1/1] iMX51: introduce MX51_GPIO_NR   Arnaud Patard (Rtp)
• [patch 1/1] iMX51: introduce MX51_GPIO_NR   Arnaud Patard (Rtp)
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Arnaud Patard (Rtp)
• [patch 1/1] iMX51: introduce IMX_GPIO_NR   Arnaud Patard (Rtp)
• [patch 1/1] mx5: Fix efikamx build   Arnaud Patard (Rtp)
• [PATCH] make mc13783 code generic   Arnaud Patard (Rtp)
• [PATCH 0/3] ASoC: add support for audio on iPaq hx4700   Dmitry Artamonow
• [PATCH 1/3] ASoC: Asahi Kasei AK4641 codec driver   Dmitry Artamonow
• [PATCH 2/3] ASoC: add iPAQ hx4700 machine driver   Dmitry Artamonow
• [PATCH 3/3] pxa/hx4700: add I2C board info for AK4641 codec   Dmitry Artamonow
• [PATCH] ASoC: fix SND_PXA2XX_LIB Kconfig warning   Dmitry Artamonow
• [PATCH] ARM: S3C64XX: fix uart clock setup for mini6410/real6410   Darius Augulis
• [GIT PULL] Samsung fixes for 2.6.37-rc2   Darius Augulis
• [PATCH] ARM: S3C64XX: fix uart clock setup for mini6410/real6410   Darius Augulis
• [GIT PULL] Samsung fixes for 2.6.37-rc4   Darius Augulis
• [GIT PULL] Samsung fixes for 2.6.37-rc4   Darius Augulis
• [PATCH] arm: omap1: devices: need to return with a value   Felipe Balbi
• [PATCH 0/2] combine zoom board-files   Felipe Balbi
• [PATCH 1/2] arm: omap: combine zoom2 and zoom3 board-files   Felipe Balbi
• [PATCH 2/2] arm: omap: zoom: substitute gpio number with symbolic name   Felipe Balbi
• [PATCH 0/6] [v2] omap:mailbox-enhancements and fixes   Felipe Balbi
• [PATCH] Fix IGEPv2 second MMC channel power supply   Felipe Balbi
• [PATCH v3 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Felipe Balbi
• [PATCH v3 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Felipe Balbi
• [PATCH v3 3/5] OMAP: mailbox: fix checkpatch warnings   Felipe Balbi
• [PATCH v3 4/5] OMAP: mailbox: send message in process context   Felipe Balbi
• [PATCH v3 5/5] OMAP: mailbox: add notification support for multiple readers   Felipe Balbi
• [PATCH v3 5/5] OMAP: mailbox: add notification support for multiple readers   Felipe Balbi
• [PATCH v3 5/5] OMAP: mailbox: add notification support for multiple readers   Felipe Balbi
• [PATCH v3 5/5] OMAP: mailbox: add notification support for multiple readers   Felipe Balbi
• [PATCH v3 5/5] OMAP: mailbox: add notification support for multiple readers   Felipe Balbi
• [PATCH v3 5/5] OMAP: mailbox: add notification support for multiple readers   Felipe Balbi
• [PATCH v3 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Felipe Balbi
• [PATCH v3 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Felipe Balbi
• [PATCH v3 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Felipe Balbi
• [PATCH v4 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Felipe Balbi
• [PATCH v4 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Felipe Balbi
• [PATCH] OMAP: UART: don't resume UARTs that are not enabled.   Felipe Balbi
• [PATCH v4 0/2] add support for the Marvell Dove SDHCI controller   Chris Ball
• [PATCH 1/2] sdhci-esdhc-imx: fix timeout on i.MX's sdhci   Chris Ball
• [PATCH] mmci: handle clock frequency 0 properly   Chris Ball
• [PATCH v4 1/2] MMC: add support for the Marvell Dove SDHCI controller   Chris Ball
• [PATCH] omap: zoom: wl1271 slot is MMC_CAP_POWER_OFF_CARD   Chris Ball
• [PATCH] ARM: V6 MPCore v6_dma_inv_range RWFO fix   Valentine Barshak
• [PATCH] ARM: V6 MPCore v6_dma_inv_range RWFO fix   Valentine Barshak
• [PATCH] ARM: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix   Valentine Barshak
• [PATCH] ARM: V6 MPCore v6_dma_inv_range and v6_dma_flush_range RWFO fix   Valentine Barshak
• [PATCH 1/2] msm: gpio: Add v2 gpio support to MSM SoCs.   Gregory Bean
• [PATCH 2/2] msm: gpio: Add irq support to v2 gpiolib.   Gregory Bean
• [PATCH v2 1/2] msm: gpio: Add v2 gpio support to MSM SoCs.   Gregory Bean
• [PATCH v2 2/2] msm: gpio: Add irq support to v2 gpiolib.   Gregory Bean
• [PATCH] msm: 8x60: Add TLMM to the iomap.   Gregory Bean
• [PATCH v3 1/2] msm: gpio: Add v2 gpio support to MSM SoCs.   Gregory Bean
• [PATCH v3 2/2] msm: gpio: Add irq support to v2 gpiolib.   Gregory Bean
• [PATCH v3 2/2] msm: gpio: Add irq support to v2 gpiolib.   Gregory Bean
• [PATCH v4 1/2] msm: gpio: Add v2 gpio support to MSM SoCs.   Gregory Bean
• [PATCH v4 2/2] msm: gpio: Add irq support to v2 gpiolib.   Gregory Bean
• [PATCH v4 2/2] msm: gpio: Add irq support to v2 gpiolib.   Gregory Bean
• [PATCH v4 2/2] msm: gpio: Add irq support to v2 gpiolib.   Gregory Bean
• [PATCH v4 2/2] msm: gpio: Add irq support to v2 gpiolib.   Gregory Bean
• [PATCH v4 2/2] msm: gpio: Add irq support to v2 gpiolib.   Gregory Bean
• [PATCH v4 2/2] msm: gpio: Add irq support to v2 gpiolib.   Gregory Bean
• [PATCH v4 2/2] msm: gpio: Add irq support to v2 gpiolib.   Gregory Bean
• [PATCH v5 1/2] msm: gpio: Add v2 gpio support to MSM SoCs.   Gregory Bean
• [PATCH v5 2/2] msm: gpio: Add irq support to v2 gpiolib.   Gregory Bean
• [PATCH] ARM: s3c2440: mini2440: Add support for new LCD's.   Marek Belisko
• [PATCH] ARM: s3c2440: mini2440: Add touchscreen support for mini2440.   Marek Belisko
• [PATCH] ARM: s3c2440: mini2440: Add selection of touchscreen.   Marek Belisko
• [PATCH] ARM: s3x24xx: Fix gpiochip_add complaining.   Marek Belisko
• [PATCH v4 1/2] MMC: add support for the Marvell Dove SDHCI controller   Ohad Ben-Cohen
• [PATCH v2 0/4] Introduce common hardware spinlock interface   Ohad Ben-Cohen
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Ohad Ben-Cohen
• [PATCH v2 2/4] drivers: hwspinlock: add OMAP implementation   Ohad Ben-Cohen
• [PATCH v2 3/4] OMAP4: hwmod data: Add hwspinlock   Ohad Ben-Cohen
• [PATCH v2 4/4] omap: add hwspinlock device   Ohad Ben-Cohen
• [PATCH] omap: boards w/ wl12xx should select REGULATOR_FIXED_VOLTAGE   Ohad Ben-Cohen
• [PATCH v2 2/4] drivers: hwspinlock: add OMAP implementation   Ohad Ben-Cohen
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Ohad Ben-Cohen
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Ohad Ben-Cohen
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Ohad Ben-Cohen
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Ohad Ben-Cohen
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Ohad Ben-Cohen
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Ohad Ben-Cohen
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Ohad Ben-Cohen
• [PATCH] omap: zoom: wl1271 slot is MMC_CAP_POWER_OFF_CARD   Ohad Ben-Cohen
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Ohad Ben-Cohen
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Ohad Ben-Cohen
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Ohad Ben-Cohen
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Ohad Ben-Cohen
• [PATCH 6/6 v2] ARM: Add support for the display controllers in VT8500 and WM8505   Arnd Bergmann
• [PATCH 6/6 v3] ARM: Add support for the display controllers in VT8500 and WM8505   Arnd Bergmann
• [PATCH 6/6 v2] ARM: Add support for the display controllers in VT8500 and WM8505   Arnd Bergmann
• [PATCH 02/10] MCDE: Add configuration registers   Arnd Bergmann
• [PATCH 01/10] MCDE: Add hardware abstraction layer   Arnd Bergmann
• [PATCH 03/10] MCDE: Add pixel processing registers   Arnd Bergmann
• [PATCH 10/10] ux500: MCDE: Add platform specific data   Arnd Bergmann
• [PATCH 09/10] MCDE: Add build files and bus   Arnd Bergmann
• [PATCH 08/10] MCDE: Add frame buffer device   Arnd Bergmann
• [PATCH 07/10] MCDE: Add display subsystem framework   Arnd Bergmann
• [PATCH 00/07] ARM: Common GIC entry macro code V3   Arnd Bergmann
• [PATCH 2.6.36 1/1 RESEND] kernel SPIN_LOCK_UNLOCKED changed to __SPIN_LOCK_UNLOCKED()   Arnd Bergmann
• [PATCH v2 03/20] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Arnd Bergmann
• [PATCH 02/10] MCDE: Add configuration registers   Arnd Bergmann
• [PATCH 01/10] MCDE: Add hardware abstraction layer   Arnd Bergmann
• [PATCH 01/10] MCDE: Add hardware abstraction layer   Arnd Bergmann
• [PATCH 01/10] MCDE: Add hardware abstraction layer   Arnd Bergmann
• [PATCH v3 15/20] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Arnd Bergmann
• [PATCH v3 15/20] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Arnd Bergmann
• [PATCH 02/10] MCDE: Add configuration registers   Arnd Bergmann
• [PATCH 09/10] MCDE: Add build files and bus   Arnd Bergmann
• [PATCH 09/10] MCDE: Add build files and bus   Arnd Bergmann
• [PATCH] ARM: Gemini: Add support for PCI Bus   Arnd Bergmann
• [PATCH] ARM: Gemini: Add support for PCI BUS   Arnd Bergmann
• [PATCH] ARM: Gemini: Add support for PCI BUS   Arnd Bergmann
• [PATCH] ARM: Gemini: Add support for PCI Bus   Arnd Bergmann
• [PATCH] ARM: Gemini: Add support for PCI Bus   Arnd Bergmann
• [PATCH] ARM: Gemini: Add support for PCI BUS   Arnd Bergmann
• [PATCH] ARM: Gemini: Add support for PCI BUS   Arnd Bergmann
• [PATCH 09/10] MCDE: Add build files and bus   Arnd Bergmann
• [PATCH] ARM: Gemini: Add support for PCI Bus   Arnd Bergmann
• Problem with sram size on OMAP1611 (OSK)   Tim Bird
• [PATCH] ARM: add MAINTAINERS entry for Marvell Dove SoC   Saeed Bishara
• [PATCH] ARM: add MAINTAINERS entry for Marvell Dove SoC   Saeed Bishara
• [PATCH 2/4] mtd: FSMC NAND replace all use of uintNN_t with uN   Artem Bityutskiy
• [PATCH 2/4] mtd: FSMC NAND replace all use of uintNN_t with uN   Artem Bityutskiy
• at91: input overruns question   Remy Bohmer
• [PATCHv2 1/3] ARM: Translate delay.S into (mostly) C   Stephen Boyd
• [PATCHv2 2/3] ARM: Allow machines to override __delay()   Stephen Boyd
• [PATCHv2 2/3] ARM: Allow machines to override __delay()   Stephen Boyd
• [PATCHv2 2/3] ARM: Allow machines to override __delay()   Stephen Boyd
• [PATCH v3 15/20] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Stephen Boyd
• [PATCH] ARM: Make the argument to virt_to_phys() "const volatile"   Stephen Boyd
• [PATCH] ARM: Fix find_next_zero_bit and related assembly   Stephen Boyd
• [PATCH 0/2] Optimized inlining for ARM   Stephen Boyd
• [PATCH 1/2] Make OPTIMIZE_INLINING a generic option   Stephen Boyd
• [PATCH 2/2] arm: add optimized inlining   Stephen Boyd
• [PATCH 10/54] ARM: bcmring: irq_data conversion.   Scott Branden
• [PATCH 8/9] ARM: S5PV210: I2S: Upgrade platform device   Jassi Brar
• [PATCH 8/9] ARM: S5PV210: I2S: Upgrade platform device   Jassi Brar
• [PATCH] ASoC: add codec support for mini6410 and real6410 boards   Jassi Brar
• [PATCH 1/9] S5PV310: DMA: Add platform devices for PL330 DMACs   Jassi Brar
• [PATCH 2/9] ARM: Samsung: Rename s3c64xx I2S platform device   Jassi Brar
• [PATCH 3/9] ARM: Samsung: Prepare audio header for new I2S driver   Jassi Brar
• [PATCH 4/9] ARM: S3C64XX: I2S: Upgrade platform device   Jassi Brar
• [PATCH 5/9] ARM: S5P64X0: I2S: Upgrade platform device   Jassi Brar
• [PATCH 6/9] ARM: S5P6442: I2S: Upgrade platform device   Jassi Brar
• [PATCH 7/9] ARM: S5PC100: I2S: Upgrade platform device   Jassi Brar
• [PATCH 8/9] ARM: S5PV210: I2S: Upgrade platform device   Jassi Brar
• [PATCH 9/9] ARM: S5PV310: Add audio platform devices   Jassi Brar
• [PATCH 1/9] S5PV310: DMA: Add platform devices for PL330 DMACs   Jassi Brar
• [PATCH] ARM: Samsung: Make sure ASoC DMA device is prototyped   Jassi Brar
• [PATCH 1/3] Add a common struct clk   Jassi Brar
• [PATCH 9/9] ARM: S5PV310: Add audio platform devices   Jassi Brar
• [PATCH] ARM: fix build error with GCC 4.5.0   Tony Breeds
• [PATCH] ARM: fix build error with GCC 4.5.0   Tony Breeds
• [PATCH] ARM: fix build error with GCC 4.5.0   Tony Breeds
• Cross compilers available on kernel.org   Tony Breeds
• [RFC] PCMCIA bugfixes   Dominik Brodowski
• [PATCH 3/5] pcmcia/sa1100: don't put machine specific init functions in .init.text   Dominik Brodowski
• [PATCH 5/5] drivers/pcmcia/soc_common.c: Use printf extension %pV   Dominik Brodowski
• [PATCH] msm: fix debug-macro.S build failure   David Brown
• [PATCH] msm: smd: Reduce driver log chatter   David Brown
• [PATCH v2] msm: smd: Reduce driver log chatter   David Brown
• [PATCH v3] msm: smd: Reduce driver log chatter   David Brown
• [PATCH v4] msm: smd: Reduce driver log chatter   David Brown
• [PATCH v5] msm: smd: Reduce driver log chatter   David Brown
• [PATCH 1/3] msm: sirc: warning fix   David Brown
• [PATCH 2/3] msm: smd: Warning cleanup   David Brown
• [PATCH 3/3] msm: Warning cleanup   David Brown
• ASoC: fix the building issue of missing codec field in 'struct snd_soc_card'   Mark Brown
• Patch IMX audmux debugfs.   Mark Brown
• [PATCH 8/9] ARM: S5PV210: I2S: Upgrade platform device   Mark Brown
• [Patch v3] Fix audmuxv2 debugfs indexing. [was: Patch IMX audmux debugfs.]   Mark Brown
• [Patch v3] Fix audmuxv2 debugfs indexing.   Mark Brown
• [PATCH 8/9] ARM: S5PV210: I2S: Upgrade platform device (Action Required)   Mark Brown
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   Mark Brown
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   Mark Brown
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   Mark Brown
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   Mark Brown
• [PATCH 1/9] S5PV310: DMA: Add platform devices for PL330 DMACs   Mark Brown
• [PATCH 1/9] S5PV310: DMA: Add platform devices for PL330 DMACs   Mark Brown
• [PATCH v6 08/12] gpio: add ti-ssp gpio driver   Mark Brown
• [PATCH 1/3] ASoC: Asahi Kasei AK4641 codec driver   Mark Brown
• [PATCH 2/3] ASoC: add iPAQ hx4700 machine driver   Mark Brown
• [PATCH 1/3] mfd: Added new regulator_data pointer to ab8500 board configuration   Mark Brown
• [PATCH 2/3] regulators: Update of ab8500 driver   Mark Brown
• [PATCH 2/3] regulators: Update of ab8500 driver   Mark Brown
• [PATCH 1/3] mfd: Added new regulator_data pointer to ab8500 board configuration   Mark Brown
• [question] NR_IRQS in genirq   Mark Brown
• [question] NR_IRQS in genirq   Mark Brown
• [PATCH 1/9] spi/pxa2xx: don't use subys initcall for driver init   Mark Brown
• [PATCH 1/9] spi/pxa2xx: don't use subys initcall for driver init   Mark Brown
• [PATCH] ARM: Samsung: Make sure ASoC DMA device is prototyped   Mark Brown
• [PATCH] ASoC: fix SND_PXA2XX_LIB Kconfig warning   Mark Brown
• [PATCH] ARM: Samsung: Make sure ASoC DMA device is prototyped   Mark Brown
• [PATCH 1/3] ARM: SAMSUNG: Convert s3c_irqext_wake() to new irq_ interrupt methods   Mark Brown
• [PATCH 2/3] ARM: S3C64XX: Convert S3C64xx irq-eint to use new irq_ methods   Mark Brown
• [PATCH 3/3] ARM: S3C64XX: Use chip_data to store the shift for EINTs   Mark Brown
• [PATCH 1/2] ARM: SAMSUNG: Convert irq-uart to use new irq_ functions   Mark Brown
• [PATCH 2/2] ARM: SAMSUNG: Convert irq-vic-timer to irq_ functions   Mark Brown
• [PATCH 00/54] ARM irq_data conversion.   Mark Brown
• [PATCH] make mc13783 code generic   Mark Brown
• [PATCH] make mc13783 code generic   Mark Brown
• [PATCH v4 08/12] gpio: add ti-ssp gpio driver   David Brownell
• [PATCH v4 08/12] gpio: add ti-ssp gpio driver   David Brownell
• [PATCH v4 08/12] gpio: add ti-ssp gpio driver   David Brownell
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   David Brownell
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   David Brownell
• [PATCH 6/6] atmel_spi: fix warning In function 'atmel_spi_dma_map_xfer'   David Brownell
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   David Brownell
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   David Brownell
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   David Brownell
• zt-180 tablet iMAPx200   Jacek Burghardt
• [PATCH v3 5/5] OMAP: mailbox: add notification support for multiple readers   Jacek Burghardt
• [PATCH] mv78xx: wrong cpu1 window base register address   Lennert Buytenhek
• [PATCH 00/54] ARM irq_data conversion.   Lennert Buytenhek
• [PATCH 01/54] ARM: core irq_data conversion.   Lennert Buytenhek
• [PATCH 02/54] ARM: ecard: irq_data conversion.   Lennert Buytenhek
• [PATCH 03/54] ARM: gic: irq_data conversion.   Lennert Buytenhek
• [PATCH 04/54] ARM: ITE 8152: irq_data conversion.   Lennert Buytenhek
• [PATCH 05/54] ARM: LoCoMo: irq_data conversion.   Lennert Buytenhek
• [PATCH 06/54] ARM: sa1111: irq_data conversion.   Lennert Buytenhek
• [PATCH 07/54] ARM: vic: irq_data conversion.   Lennert Buytenhek
• [PATCH 08/54] ARM: aaec2000: irq_data conversion.   Lennert Buytenhek
• [PATCH 09/54] ARM: at91: irq_data conversion.   Lennert Buytenhek
• [PATCH 10/54] ARM: bcmring: irq_data conversion.   Lennert Buytenhek
• [PATCH 11/54] ARM: clps711x: irq_data conversion.   Lennert Buytenhek
• [PATCH 12/54] ARM: davinci: irq_data conversion.   Lennert Buytenhek
• [PATCH 13/54] ARM: dove: irq_data conversion.   Lennert Buytenhek
• [PATCH 14/54] ARM: ebsa110: irq_data conversion.   Lennert Buytenhek
• [PATCH 15/54] ARM: ep93xx: irq_data conversion.   Lennert Buytenhek
• [PATCH 16/54] ARM: footbridge: irq_data conversion.   Lennert Buytenhek
• [PATCH 17/54] ARM: gemini: irq_data conversion.   Lennert Buytenhek
• [PATCH 18/54] ARM: h720x: irq_data conversion.   Lennert Buytenhek
• [PATCH 19/54] ARM: integrator: irq_data conversion.   Lennert Buytenhek
• [PATCH 20/54] ARM: iop13xx: irq_data conversion.   Lennert Buytenhek
• [PATCH 21/54] ARM: iop32x: irq_data conversion.   Lennert Buytenhek
• [PATCH 22/54] ARM: iop33x: irq_data conversion.   Lennert Buytenhek
• [PATCH 23/54] ARM: ixp2000: irq_data conversion.   Lennert Buytenhek
• [PATCH 24/54] ARM: ixp23xx: irq_data conversion.   Lennert Buytenhek
• [PATCH 25/54] ARM: ixp4xx: irq_data conversion.   Lennert Buytenhek
• [PATCH 26/54] ARM: ks8695: irq_data conversion.   Lennert Buytenhek
• [PATCH 27/54] ARM: lh7a40x: irq_data conversion.   Lennert Buytenhek
• [PATCH 28/54] ARM: lpc32xx: irq_data conversion.   Lennert Buytenhek
• [PATCH 29/54] ARM: mmp: irq_data conversion.   Lennert Buytenhek
• [PATCH 30/54] ARM: msm: irq_data conversion.   Lennert Buytenhek
• [PATCH 31/54] ARM: mx3: irq_data conversion.   Lennert Buytenhek
• [PATCH 32/54] ARM: netx: irq_data conversion.   Lennert Buytenhek
• [PATCH 33/54] ARM: ns9xxx: irq_data conversion.   Lennert Buytenhek
• [PATCH 34/54] ARM: nuc93x: irq_data conversion.   Lennert Buytenhek
• [PATCH 35/54] ARM: omap1: irq_data conversion.   Lennert Buytenhek
• [PATCH 36/54] ARM: omap2: irq_data conversion.   Lennert Buytenhek
• [PATCH 37/54] ARM: pnx4008: irq_data conversion.   Lennert Buytenhek
• [PATCH 38/54] ARM: PXA SoCs: irq_data conversion.   Lennert Buytenhek
• [PATCH 39/54] ARM: rpc: irq_data conversion.   Lennert Buytenhek
• [PATCH 40/54] ARM: Samsung SoCs: irq_data conversion.   Lennert Buytenhek
• [PATCH 41/54] ARM: sa1100: irq_data conversion.   Lennert Buytenhek
• [PATCH 42/54] ARM: shark: irq_data conversion.   Lennert Buytenhek
• [PATCH 43/54] ARM: stmp378x: irq_data conversion.   Lennert Buytenhek
• [PATCH 44/54] ARM: stmp37xx: irq_data conversion.   Lennert Buytenhek
• [PATCH 45/54] ARM: tcc8k: irq_data conversion.   Lennert Buytenhek
• [PATCH 46/54] ARM: tegra: irq_data conversion.   Lennert Buytenhek
• [PATCH 47/54] ARM: versatile: irq_data conversion.   Lennert Buytenhek
• [PATCH 48/54] ARM: w90x900: irq_data conversion.   Lennert Buytenhek
• [PATCH 49/54] ARM: plat-mxc: irq_data conversion.   Lennert Buytenhek
• [PATCH 50/54] ARM: plat-nomadik: irq_data conversion.   Lennert Buytenhek
• [PATCH 51/54] ARM: plat-omap: irq_data conversion.   Lennert Buytenhek
• [PATCH 52/54] ARM: plat-orion: irq_data conversion.   Lennert Buytenhek
• [PATCH 53/54] ARM: plat-spear: irq_data conversion.   Lennert Buytenhek
• [PATCH 54/54] ARM: plat-stmp3xxx: irq_data conversion.   Lennert Buytenhek
• [PATCH 1/1] ARM Orion: added Buffalo LS-CHL support   Lennert Buytenhek
• [PATCH 30/54] ARM: msm: irq_data conversion.   Lennert Buytenhek
• [PATCH 15/54] ARM: ep93xx: irq_data conversion.   Lennert Buytenhek
• [PATCH 2/2] ARM: imx: Add mx53 support to common msl functions.   Eric Bénard
• [PATCH 2/2] ARM: imx: Add mx53 support to common msl functions.   Eric Bénard
• [PATCHv2 2/2] ARM: imx: Add mx53 support to common msl functions.   Eric Bénard
• [PATCH 00/51] some more imx patches for 2.6.38   Eric Bénard
• rm9200: update   Eric Bénard
• [PATCH] plat-mxc/ehci.c: fix compile breakage   Eric Bénard
• [PATCH] [ARM] gic: Unmask private interrupts on all cores during IRQ enable   Stephen Caudle
• [PATCH v2] [ARM] gic: Unmask private interrupts on all cores during IRQ enable   Stephen Caudle
• [PATCH v2] [ARM] gic: Unmask private interrupts on all cores during IRQ enable   Stephen Caudle
• [PATCH] ARM: fix some trivial compiler warnings   Jason Chagas
• [PATCH] ARM: fix some trivial compiler warnings   Jason Chagas
• [PATCH 3/6] input: Add support for VIA VT8500 and compatibles in i8042   Alexey Charkov
• [PATCH 1/6 v2] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 2/6 v2] serial: Add support for UART on VIA VT8500 and compatibles   Alexey Charkov
• [PATCH 3/6 v2] input: Add support for VIA VT8500 and compatibles in i8042   Alexey Charkov
• [PATCH 4/6 v2] usb: Add support for VIA VT8500 and compatibles in EHCI HCD   Alexey Charkov
• [PATCH 5/6 v2] rtc: Add support for the RTC in VIA VT8500 and compatibles   Alexey Charkov
• [PATCH 6/6 v2] ARM: Add support for the display controllers in VT8500 and WM8505   Alexey Charkov
• [PATCH 1/6 v2] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6 v2] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6 v3] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 2/6 v3] serial: Add support for UART on VIA VT8500 and compatibles   Alexey Charkov
• [PATCH 6/6 v2] ARM: Add support for the display controllers in VT8500 and WM8505   Alexey Charkov
• [PATCH 6/6 v3] ARM: Add support for the display controllers in VT8500 and WM8505   Alexey Charkov
• [PATCH 1/6 v4] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 2/6 v4] serial: Add support for UART on VIA VT8500 and compatibles   Alexey Charkov
• [PATCH 6/6 v3] ARM: Add support for the display controllers in VT8500 and WM8505   Alexey Charkov
• [PATCH 3/3] ARM: Add support for the display controllers in VT8500 and WM8505   Alexey Charkov
• [PATCH 6/6 v4] ARM: Add support for the display controllers in VT8500 and WM8505   Alexey Charkov
• [PATCH 6/6 v4] ARM: Add support for the display controllers in VT8500 and WM8505   Alexey Charkov
• [PATCH 6/6 v4] ARM: Add support for the display controllers in VT8500 and WM8505   Alexey Charkov
• [PATCH 6/6 v2] ARM: Add support for the display controllers in VT8500 and WM8505   Alexey Charkov
• [PATCH 1/6 v5] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6 v6] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 1/6 v6] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 5/6 v2] rtc: Add support for the RTC in VIA VT8500 and compatibles   Alexey Charkov
• [PATCH 3/6 v2] input: Add support for VIA VT8500 and compatibles in i8042   Alexey Charkov
• [PATCH 3/6 v2] input: Add support for VIA VT8500 and compatibles in i8042   Alexey Charkov
• [PATCH 5/6 v3] rtc: Add support for the RTC in VIA VT8500 and compatibles   Alexey Charkov
• [PATCH 5/6 v4] rtc: Add support for the RTC in VIA VT8500 and compatibles   Alexey Charkov
• [PATCH 5/6 v4] rtc: Add support for the RTC in VIA VT8500 and compatibles   Alexey Charkov
• [PATCH 1/6 v7] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH 5/6 v5] rtc: Add support for the RTC in VIA VT8500 and compatibles   Alexey Charkov
• [PATCH v4 08/12] gpio: add ti-ssp gpio driver   Cyril Chemparathy
• [PATCH v5 00/12] tnetv107x ssp drivers   Cyril Chemparathy
• [PATCH v5 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
• [PATCH v5 02/12] davinci: add tnetv107x ssp platform device   Cyril Chemparathy
• [PATCH v5 03/12] davinci: add ssp config for tnetv107x evm board   Cyril Chemparathy
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   Cyril Chemparathy
• [PATCH v5 05/12] davinci: add spi devices on tnetv107x evm   Cyril Chemparathy
• [PATCH v5 06/12] regulator: add driver for tps6524x regulator   Cyril Chemparathy
• [PATCH v5 07/12] davinci: add tnetv107x evm regulators   Cyril Chemparathy
• [PATCH v5 08/12] gpio: add ti-ssp gpio driver   Cyril Chemparathy
• [PATCH v5 09/12] davinci: add tnetv107x evm ti-ssp gpio device   Cyril Chemparathy
• [PATCH v5 10/12] backlight: add support for tps6116x controller   Cyril Chemparathy
• [PATCH v5 11/12] davinci: add tnetv107x evm backlight device   Cyril Chemparathy
• [PATCH v5 12/12] davinci: add tnetv107x evm i2c eeprom device   Cyril Chemparathy
• [PATCH v5 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
• [PATCH v5 08/12] gpio: add ti-ssp gpio driver   Cyril Chemparathy
• [PATCH v5 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   Cyril Chemparathy
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   Cyril Chemparathy
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   Cyril Chemparathy
• [PATCH v6 00/12] tnetv107x ssp drivers   Cyril Chemparathy
• [PATCH v6 01/12] misc: add driver for sequencer serial port   Cyril Chemparathy
• [PATCH v6 02/12] davinci: add tnetv107x ssp platform device   Cyril Chemparathy
• [PATCH v6 03/12] davinci: add ssp config for tnetv107x evm board   Cyril Chemparathy
• [PATCH v6 04/12] spi: add ti-ssp spi master driver   Cyril Chemparathy
• [PATCH v6 05/12] davinci: add spi devices on tnetv107x evm   Cyril Chemparathy
• [PATCH v6 06/12] regulator: add driver for tps6524x regulator   Cyril Chemparathy
• [PATCH v6 07/12] davinci: add tnetv107x evm regulators   Cyril Chemparathy
• [PATCH v6 08/12] gpio: add ti-ssp gpio driver   Cyril Chemparathy
• [PATCH v6 09/12] davinci: add tnetv107x evm ti-ssp gpio device   Cyril Chemparathy
• [PATCH v6 10/12] backlight: add support for tps6116x controller   Cyril Chemparathy
• [PATCH v6 11/12] davinci: add tnetv107x evm backlight device   Cyril Chemparathy
• [PATCH v6 12/12] davinci: add tnetv107x evm i2c eeprom device   Cyril Chemparathy
• [PATCH v6 11/12] davinci: add tnetv107x evm backlight device   Cyril Chemparathy
• [PATCH v6 05/12] davinci: add spi devices on tnetv107x evm   Cyril Chemparathy
• Forced HW_BREAKPOINT   Cyril Chemparathy
• [PATCH 03/15] ARM: mxs: Add reset routines   Xinyu Chen
• [PATCH 5/6 v2] rtc: Add support for the RTC in VIA VT8500 and compatibles   Lars-Peter Clausen
• [PATCH 5/6 v3] rtc: Add support for the RTC in VIA VT8500 and compatibles   Lars-Peter Clausen
• [PATCH] ARM: s3x24xx: Fix gpiochip_add complaining.   Lars-Peter Clausen
• [PATCH 5/6 v4] rtc: Add support for the RTC in VIA VT8500 and compatibles   Lars-Peter Clausen
• [PATCH RESEND v3] ARM: s3c2442: Setup gpio {set, get}_pull callbacks   Lars-Peter Clausen
• [PATCH RESEND v3] ARM: s3c2442: Setup gpio {set, get}_pull callbacks   Lars-Peter Clausen
• [PATCH RESEND v3] ARM: s3c2442: Setup gpio {set, get}_pull callbacks   Lars-Peter Clausen
• [PATCH v4] ARM: s3c244x: Fix mess with gpio {set, get}_pull callbacks   Lars-Peter Clausen
• [PATCH] TS-78xxx NAND resource type should be IORESOURCE_MEM   Alexander Clouter
• [PATCH] omap: tidspbridge: fix build failure on MEMBLOCK_REAL_LIMIT   Felipe Contreras
• [PATCH 6/6] omap: iommu: code reorganization and cleanup   Felipe Contreras
• [PATCH v2 6/7] omap: mailbox: fix detection for previously supported chips   Felipe Contreras
• [PATCH 1/2] video: omap: vram: remove from normal memory   Felipe Contreras
• [PATCH v3 06/13] OMAP3: DMA: hwmod: add system DMA   Cousson, Benoit
• [PATCH v3 06/13] OMAP3: DMA: hwmod: add system DMA   Cousson, Benoit
• [PATCH v2 1/7] OMAP2: hwmod data: add mailbox data   Cousson, Benoit
• [PATCH v2 3/7] OMAP4: hwmod data: add mailbox data   Cousson, Benoit
• [PATCH v2 4/7] omap: mailbox: initial hwmod support   Cousson, Benoit
• [PATCH v2 5/7] omap: mailbox: add omap_device latency information   Cousson, Benoit
• [PATCH v2 6/7] omap: mailbox: fix detection for previously supported chips   Cousson, Benoit
• [PATCH v2 7/7] omap: mailbox: remove unreachable return   Cousson, Benoit
• [PATCH 0/6] omap: iommu: hwmod support and code reorganization   Cousson, Benoit
• [PATCH v2 0/7] omap: mailbox: hwmod support and dependent cleanup patches   Cousson, Benoit
• [PATCH 0/6] omap: iommu: hwmod support and code reorganization   Cousson, Benoit
• [PATCH 1/6] omap: iommu: remove redundant clock usage   Cousson, Benoit
• [PATCH 2/6] OMAP3: hwmod data: Add mmu for iva2 and isp   Cousson, Benoit
• [PATCH 3/6] OMAP4: hwmod data: add mmu hwmod for ducati and tesla   Cousson, Benoit
• [PATCH 4/6] omap: iommu: intial hwmod support   Cousson, Benoit
• [PATCH 5/6] omap: iommu: hwmod device enable/disable routines   Cousson, Benoit
• [PATCH 6/6] omap: iommu: code reorganization and cleanup   Cousson, Benoit
• [PATCH v2 3/7] OMAP4: hwmod data: add mailbox data   Cousson, Benoit
• [PATCH v2 6/7] omap: mailbox: fix detection for previously supported chips   Cousson, Benoit
• [PATCH 0/6] omap: iommu: hwmod support and code reorganization   Cousson, Benoit
• [PATCH 2/6] OMAP3: hwmod data: Add mmu for iva2 and isp   Cousson, Benoit
• [PATCH 3/6] OMAP4: hwmod data: add mmu hwmod for ducati and tesla   Cousson, Benoit
• [PATCH 3/6] OMAP4: hwmod data: add mmu hwmod for ducati and tesla   Cousson, Benoit
• [PATCH 0/6] [v2] omap:mailbox-enhancements and fixes   Cousson, Benoit
• [PATCH 0/6] [v2] omap:mailbox-enhancements and fixes   Cousson, Benoit
• [PATCH 0/6] [v2] omap:mailbox-enhancements and fixes   Cousson, Benoit
• [PATCH 0/6] [v2] omap:mailbox-enhancements and fixes   Cousson, Benoit
• [PATCH 0/6] [v2] OMAP: mailbox: enhancements and fixes   Cousson, Benoit
• [PATCH 0/6] [v2] OMAP: mailbox: enhancements and fixes   Cousson, Benoit
• [PATCH 5/8] OMAP2+: hwmod: rename omap_hwmod_mutex to _hwmod_list_mutex   Cousson, Benoit
• [PATCH] OMAP4: clocks: add dummy clock for mailbox   Cousson, Benoit
• [PATCH v3 1/5] OMAP: mailbox: change full flag per mailbox queue instead of global   Cousson, Benoit
• [PATCH v3 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Cousson, Benoit
• [PATCH v3 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Cousson, Benoit
• [PATCH v3 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Cousson, Benoit
• [PATCH v3 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Cousson, Benoit
• [PATCH v7 05/11] OMAP2420: hwmod data: Add GPIO   Cousson, Benoit
• [PATCH v7 06/11] OMAP2430: hwmod data: Add GPIO   Cousson, Benoit
• [PATCH v7 07/11] OMAP3: hwmod data: Add GPIO   Cousson, Benoit
• [PATCH v7 09/11] OMAP2+: GPIO: device registration   Cousson, Benoit
• [PATCH v7 05/11] OMAP2420: hwmod data: Add GPIO   Cousson, Benoit
• [PATCH v7 05/11] OMAP2420: hwmod data: Add GPIO   Cousson, Benoit
• [PATCH 2/6 v2] serial: Add support for UART on VIA VT8500 and compatibles   Alan Cox
• [PATCH 2/6 v3] serial: Add support for UART on VIA VT8500 and compatibles   Alan Cox
• [PATCH] Documentation about RS485 serial communications   Alan Cox
• [PATCH] Documentation about RS485 serial communications   Alan Cox
• [PATCH RFC] ARM ETM driver: Do not deref potentially null pointer and don't allocate and free mem while holding lock.   Colin Cross
• [PATCH] [ARM] twd: Allow twd rescaling to match cpu frequency   Colin Cross
• [PATCH] ARM: tegra: timer: Separate clocksource and sched_clock   Colin Cross
• [PATCH] ARM: twd: Adjust localtimer frequency with cpufreq notifiers   Colin Cross
• [PATCH] ARM: twd: Adjust localtimer frequency with cpufreq notifiers   Colin Cross
• [PATCH] ARM: Fix spinlock bad magic on disabling nonboot cpu   Colin Cross
• [PATCH] usb: host: tegra: protect bus suspend with CONFIG_PM   Colin Cross
• [PATCH] ARM: tegra: irq: protect irq suspend with CONFIG_PM   Colin Cross
• [PATCH] ARM: tegra: suspend: protect suspend functions with CONFIG_PM   Colin Cross
• [PATCHv5 0/4] omap: iovmm - fixes for iovmm module   Hiroshi DOYU
• [PATCH 0/4] S5PC110: MIPI-DSI support.   InKi Dae
• [PATCH 3/4] s3c-fb: Add support S5PV310 FIMD   Inki Dae
• [PATCH 3/4] s3c-fb: Add support S5PV310 FIMD   Inki Dae
• [PATCH 0/3] S5PV210: added MIPI-DSI driver.   Inki Dae
• [PATCH 1/3] S5PV210: added MIPI-DSI driver.   Inki Dae
• [PATCH 2/3] S5PV210: added MIPI-DSI driver.   Inki Dae
• [PATCH 3/3] S5PV210: added MIPI-DSI driver.   Inki Dae
• [PATCH 1/3] S5PV210: added MIPI-DSI Driver.   Inki Dae
• [PATCH 2/3] S5PV210: added MIPI-DSI Driver.   Inki Dae
• [PATCH 3/3] S5PV210: added MIPI-DSI Driver.   Inki Dae
• [PATCH 1/3] S5PV210: added MIPI-DSI Driver.   Inki Dae
• [PATCH 2/3] S5PV210: added MIPI-DSI Driver.   Inki Dae
• [PATCH 3/3] S5PV210: added MIPI-DSI Driver.   Inki Dae
• [PATCH 1/3] FB: added a structure for CPU interface to linux/fb.h   Inki Dae
• [PATCH 2/3] S5PV210: added parameters for CPU interface to plat-samsung/fb.h   Inki Dae
• [PATCH 3/3] S5PV210: added MIPI-DSI Driver.   Inki Dae
• [PATCH 2/3] S5PV210: added parameters for CPU interface to plat-samsung/fb.h   Inki Dae
• [PATCH 3/3] S5PV210: added MIPI-DSI Driver.   Inki Dae
• [PATCH 1/4] FB: added a structure for CPU interface to linux/fb.h   Inki Dae
• [PATCH 2/4] S5PC110: added parameters for CPU interface to plat-samsung/fb.h   Inki Dae
• [PATCH 3/4] S5PC110: add MIPI-DSI support for platform and machine.   Inki Dae
• [PATCH 4/4] S5PC110: add MIPI-DSI driver.   Inki Dae
• [PATCH 1/4] FB: added a structure for CPU interface to linux/fb.h   Inki Dae
• [PATCH 3/4] S5PC110: add MIPI-DSI support for platform and machine.   Inki Dae
• [PATCH 4/4] S5PC110: add MIPI-DSI driver.   Inki Dae
• [PATCH 3/4] S5PC110: add MIPI-DSI support for platform and machine.   Inki Dae
• [PATCH v2 1/4] ARM: S5PV210: Add gpio interrupt support   Jession Dai
• Using non-Global mappings for kernel address space   Christoffer Dall
• Cache clean of page table entries   Christoffer Dall
• Using non-Global mappings for kernel address space   Christoffer Dall
• Cache clean of page table entries   Christoffer Dall
• Using non-Global mappings for kernel address space   Christoffer Dall
• Cache clean of page table entries   Christoffer Dall
• [PATCH] ARM: Common GIC entry macro code   Magnus Damm
• [PATCH] ARM: Common GIC entry macro code   Magnus Damm
• [PATCH] ARM: Common GIC entry macro code V2   Magnus Damm
• [PATCH] ARM: Common GIC entry macro code V2   Magnus Damm
• [PATCH] ARM: Common GIC entry macro code V2   Magnus Damm
• [PATCH] ARM: Common GIC entry macro code V2   Magnus Damm
• [PATCH 00/07] ARM: Common GIC entry macro code V3   Magnus Damm
• [PATCH 01/07] ARM: Introduce asm/hardware/entry-macro-gic.S   Magnus Damm
• [PATCH 02/07] ARM: Use shared GIC entry macros on CNS3XXX   Magnus Damm
• [PATCH 03/07] ARM: Use shared GIC entry macros on Realview   Magnus Damm
• [PATCH 04/07] ARM: Use shared GIC entry macros on Tegra   Magnus Damm
• [PATCH 05/07] ARM: Use shared GIC entry macros on UX500   Magnus Damm
• [PATCH 06/07] ARM: Use shared GIC entry macros on Vexpress   Magnus Damm
• [PATCH 07/07] ARM: Use shared GIC entry macros on OMAP   Magnus Damm
• [PATCH] ARM: mach-shmobile: Initial AG5 and AG5EVM support   Magnus Damm
• [patch v4 0/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM   Magnus Damm
• arm smp support patch   George G. Davis
• [PATCH] ARM: V6 MPCore v6_dma_inv_range RWFO fix   George G. Davis
• [PATCH] ARM: V6 MPCore v6_dma_inv_range RWFO fix   George G. Davis
• [PATCH] ARM: V6 MPCore v6_dma_inv_range RWFO fix   George G. Davis
• [PATCH 0/3] Some not-very-exciting random one-liners   Will Deacon
• [PATCH 1/3] ARM: backtrace: fix calculation of thread stack base   Will Deacon
• [PATCH 2/3] ARM: perf-events: squash compiler warning   Will Deacon
• [PATCH 3/3] ARM: atomic64: use generic implementation for OABI configurations   Will Deacon
• [PATCHv2 1/3] ARM: Translate delay.S into (mostly) C   Will Deacon
• [PATCH] ARM: vexpress ct-ca9x4: only set twd_base if local timers are being used   Will Deacon
• recent ARM Erratas 742231 & 742230 broken.   Will Deacon
• [PATCH] ARM: thumb2: fix incorrect optimisation in usracc   Will Deacon
• [PATCH 0/5] ARM: perf: split up perf_event.c by architecture   Will Deacon
• [PATCH 1/5] ARM: perf: consolidate common PMU behaviour   Will Deacon
• [PATCH 2/5] ARM: perf: avoid exposing internal stop function for v6 PMU   Will Deacon
• [PATCH 3/5] ARM: perf: add _init() functions to PMUs   Will Deacon
• [PATCH 4/5] ARM: perf: encode PMU name in arm_pmu structure   Will Deacon
• [PATCH 5/5] ARM: perf: separate PMU backends into multiple files   Will Deacon
• [PATCH v2] ARM: vexpress: add support for multiple core tiles   Will Deacon
• [PATCH 0/5] ARM: perf: split up perf_event.c by architecture   Will Deacon
• [PATCH 1/5] ARM: perf: consolidate common PMU behaviour   Will Deacon
• [PATCH 2/5] ARM: perf: avoid exposing internal stop function for v6 PMU   Will Deacon
• [PATCH 5/5] ARM: perf: separate PMU backends into multiple files   Will Deacon
• Weirdo gcc 4.3.x behaviour   Will Deacon
• [PATCH v2] ARM: vexpress: add support for multiple core tiles   Will Deacon
• [PATCH v2] ARM: perf: split up perf_event.c by architecture   Will Deacon
• [PATCH v2] ARM: perf: split up perf_event.c by architecture   Will Deacon
• [PATCH 1/2] ARM: hw_breakpoint: ensure OS lock is clear before writing to debug registers   Will Deacon
• [PATCH 2/2] ARM: hw_breakpoint: reset control registers in hotplug path   Will Deacon
• [GIT PULL] ARM: perf: split by architecture   Will Deacon
• [PATCH 0/4] ARM: hw_breakpoint: fixes and improvements   Will Deacon
• [PATCH 1/4] ARM: hw_breakpoint: ensure OS lock is clear before writing to debug registers   Will Deacon
• [PATCH 2/4] ARM: hw_breakpoint: reset control registers in hotplug path   Will Deacon
• [PATCH 3/4] ARM: hw_breakpoint: correct and simplify alignment fixup code   Will Deacon
• [PATCH 4/4] ARM: ptrace: fix style issue with hw_breakpoint interface   Will Deacon
• [GIT PULL] ARM: perf: split by architecture   Will Deacon
• linux-next: omap2plus_defconfig not building   Will Deacon
• [PATCH 0/4] ARM: hw_breakpoint: fixes and improvements   Will Deacon
• [PATCH v3] ARM: perf: split up perf_event.c by architecture   Will Deacon
• [PATCH 0/8] ARM: hw_breakpoint: fixes and improvements (v2)   Will Deacon
• [PATCH 1/8] ARM: hw_breakpoint: ensure OS lock is clear before writing to debug registers   Will Deacon
• [PATCH 2/8] ARM: hw_breakpoint: reset control registers in hotplug path   Will Deacon
• [PATCH 3/8] ARM: hw_breakpoint: correct and simplify alignment fixup code   Will Deacon
• [PATCH 4/8] ARM: hw_breakpoint: disable preemption during debug exception handling   Will Deacon
• [PATCH 5/8] ARM: hw_breakpoint: don't advertise reserved breakpoints   Will Deacon
• [PATCH 6/8] ARM: hw_breakpoint: do not allocate new breakpoints with rcu_read_lock held   Will Deacon
• [PATCH 7/8] ARM: ptrace: fix style issue with hw_breakpoint interface   Will Deacon
• [PATCH 8/8] ARM: hw_breakpoint: fix warnings generated by sparse   Will Deacon
• [PATCH v3] ARM: vexpress: add support for multiple core tiles   Will Deacon
• [PATCH 5/8] ARM: hw_breakpoint: don't advertise reserved breakpoints   Will Deacon
• ARM perf events spin locks   Will Deacon
• ARM perf events spin locks   Will Deacon
• [PATCH 5/8] ARM: hw_breakpoint: don't advertise reserved breakpoints   Will Deacon
• ARM perf events spin locks   Will Deacon
• [PATCH][ ARM cpu hotplug 1/2 ] extract common code for arm cpu hotplug   Will Deacon
• ARM perf events spin locks   Will Deacon
• [PATCH] ARM: perf: use raw_spinlock_t for pmu_lock   Will Deacon
• [PATCH 1/3] OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c   DebBarma, Tarun Kanti
• [PATCH 00/10] MCDE: Add frame buffer device driver   Alex Deucher
• [PATCH 00/10] MCDE: Add frame buffer device driver   Alex Deucher
• [PATCH 00/10] MCDE: Add frame buffer device driver   Alex Deucher
• [PATCH] ARM: Common GIC entry macro code   Abhijeet Dharmapurikar
• arm smp support patch   Abhijeet Dharmapurikar
• arm smp support patch   Abhijeet Dharmapurikar
• [PATCH 03/54] ARM: gic: irq_data conversion.   Abhijeet Dharmapurikar
• [patch v3 01/10] efikamx: read board id   Nguyen Dinh-R00091
• [PATCH 2/2] ARM: imx: Add mx53 support to common msl functions.   Nguyen Dinh-R00091
• [PATCH 2/2] ARM: imx: Add mx53 support to common msl functions.   Nguyen Dinh-R00091
• [PATCH 2/2] ARM: imx: Add mx53 support to common msl functions.   Nguyen Dinh-R00091
• [PATCHv3 1/2] ARM: imx: Add core definitions for MX53   Nguyen Dinh-R00091
• [PATCH] ARM i.MX: consolidate chip revision macros   Nguyen Dinh-R00091
• [PATCHv3] ARM: imx: Add support for low power suspend on MX51.   Nguyen Dinh-R00091
• [PATCHv5 1/3] ARM: imx: Add core definitions for MX53   Nguyen Dinh-R00091
• [PATCH] ARM: imx: Add mx53 changes to crm_regs   Nguyen Dinh-R00091
• [PATCH 2/2] h1940-leds: Fix compile issue introduced by latch-related changes   Ben Dooks
• Query abut 2410 LCD configuration   Ben Dooks
• [PATCH 1/7] i2c/pxa2xx: Don't touch ISAR if not in slave mode   Ben Dooks
• [PATCH 2/7] arm/pxa2xx: reorganize I2C files   Ben Dooks
• [PATCH 3/7] i2c/pxa2xx: Add PCI support for PXA I2C controller   Ben Dooks
• [PATCH 01/10] SMDK2416: Select MACH_SMDK, S3C_DEV_NAND, S3C_DEV_USB_HOST   Ben Dooks
• [PATCH 05/10] ARM S3C2443: Select properly ARM core type   Ben Dooks
• [PATCH 09/10] ARM S3C2412: Fix typo in CONFIG_CPU_S3C2412_ONLY definition   Ben Dooks
• [PATCH v5] ARM: s3c244x: Fix mess with gpio {set, get}_pull callbacks   Ben Dooks
• [RFC v2 7/8] TILER-DMM: Main TILER driver implementation   Randy Dunlap
• [PATCH] mv78xx: wrong cpu1 window base register address   Evgeniy Dushistov
• [PATCH 00/10] MCDE: Add frame buffer device driver   Michel Dänzer
• [PATCH] Documentation about RS485 serial communications   Grant Edwards
• at91sam9g45 USB OTG support?   Rob Emanuele
• USB Serial Gadget was Re: at91sam9g45 USB OTG support?   Rob Emanuele
• [PATCH] AT91 USB Serial Device   Rob Emanuele
• [PATCH 06/54] ARM: sa1111: irq_data conversion.   Kristoffer Ericson
• [patch 1/1] imx: fix iomux v3   Fabio Estevam
• [PATCH] mx51_3ds: Add esdhc support   Fabio Estevam
• [patch 1/1] imx: fix iomux v3   Fabio Estevam
• [PATCH v2] mx51_3ds: Add esdhc support   Fabio Estevam
• [PATCH v3] mx51_3ds: Add esdhc support   Fabio Estevam
• [PATCH] mx51_babbage: Add SPI flash support   Fabio Estevam
• [PATCHv3 1/2] ARM: imx: Add core definitions for MX53   Fabio Estevam
• [PATCH] mx51_babbage: Add initial PMIC support   Fabio Estevam
• [PATCH] mx35_3ds: Add watchdog support   Fabio Estevam
• [PATCH] mx35_3ds: Add watchdog support   Fabio Estevam
• [PATCH] mx51_babbage: Register audio codec in the I2C bus   Fabio Estevam
• [PATCH] mx51: Add a dummy clock to watchdog   Fabio Estevam
• [PATCH] mx35_3ds: Add watchdog support   Fabio Estevam
• [PATCH 0/5] mx51: Add PWM support   Fabio Estevam
• [PATCH 1/5] mx51: Add PWM resources   Fabio Estevam
• [PATCH 2/5] mx51: Add PWM clock support   Fabio Estevam
• [PATCH 3/5] mx51: Add mx51 processor to the pwm driver   Fabio Estevam
• [PATCH 4/5] mx51: Add IOMUX definition for PWM output pin   Fabio Estevam
• [PATCH 5/5] mx51_babbage: Add PWM support   Fabio Estevam
• [PATCH] ARM: imx: fix ehci-mxc build.   Fabio Estevam
• [PATCH] mx51_babbage: Add AT24C512 EEPROM support   Fabio Estevam
• [PATCH 46/51] ARM: mx3: dynamically allocate mxc_rnga devices   Fabio Estevam
• [PATCH 1/2] ARM: mx5: introduce SOC_IMX51   Fabio Estevam
• [PATCH 2/2] ARM: mx5: dynamically allocate imx2-wdt devices   Fabio Estevam
• [PATCH 1/2] ARM: mx5: introduce SOC_IMX51   Fabio Estevam
• [patch 1/1] iMX51: introduce MX51_GPIO_NR   Fabio Estevam
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Fabio Estevam
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Fabio Estevam
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Fabio Estevam
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Fabio Estevam
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Fabio Estevam
• [PATCH v3 1/2] ARM: mx5: introduce SOC_IMX51   Fabio Estevam
• [PATCH v3 2/2] ARM: mx5: dynamically allocate imx2-wdt devices   Fabio Estevam
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Fabio Estevam
• [PATCH] ARM: imx: Add mx53 changes to crm_regs   Fabio Estevam
• [PATCH v2 1/2] ARM: mx5: dynamically allocate pwm devices   Fabio Estevam
• [PATCH v2 2/2] ARM: mx5: dynamically allocate imx-keypad devices   Fabio Estevam
• [PATCH v2 1/2] ARM: mx5: dynamically allocate pwm devices   Fabio Estevam
• [PATCH v3 2/2] ARM: mx5: dynamically allocate imx-keypad devices   Fabio Estevam
• [PATCH] ARM: mx5: fix keypad clock   Fabio Estevam
• [PATCH v3 1/2] ARM: mx5: dynamically allocate pwm devices   Fabio Estevam
• [PATCH v3 2/2] ARM: mx5: dynamically allocate imx-keypad devices   Fabio Estevam
• [PATCH v2] ARM: mx5: fix keypad clock name   Fabio Estevam
• [PATCH v4 1/3] ARM: mx5: dynamically allocate pwm devices   Fabio Estevam
• [PATCH v4 2/3] ARM: mx5: dynamically allocate imx-keypad devices   Fabio Estevam
• [PATCH v4 3/3] ARM: mx5: fix keypad clock name   Fabio Estevam
• [PATCH v5 1/2] ARM: mx5: dynamically allocate pwm devices   Fabio Estevam
• [PATCH v5 2/2] ARM: mx5: dynamically allocate imx-keypad devices   Fabio Estevam
• at91sam9g45 USB OTG support?   Nicolas Ferre
• [PATCH] Documentation about RS485 serial communications   Nicolas Ferre
• [PATCH] Acme Systems FOX Board G20 board files   Nicolas Ferre
• [PATCH] Acme Systems FOX Board G20 board files   Nicolas Ferre
• [PATCH] MMC: Fix multiblock SDIO transfers in AT91 MCI   Nicolas Ferre
• [GIT PULL] AT91: 2.6.37-rc4 at91rm9200 updates   Nicolas Ferre
• memory allocation errors on Marvell Kirkwood   Frank
• memory allocation errors on Marvell Kirkwood   Frank
• memory allocation errors on Marvell Kirkwood   Frank
• [RFC 0/2] Selective identity mapping for kexec   Per Fransson
• [RFC 2/2] Selective MMU identity mapping for kexec   Per Fransson
• [RFC 0/2] Selective MMU identity mapping for kexec   Per Fransson
• [RFC 1/2] Selective MMU identity mapping for kexec   Per Fransson
• [RFC 2/2] Selective MMU identity mapping for kexec   Per Fransson
• [PATCH] Add call to non-crashing cores through IPI   Per Fransson
• [PATCH] Add call to non-crashing cores through IPI   Per Fransson
• [PATCH] Add call to non-crashing cores through IPI   Per Fransson
• [PATCH] Add call to non-crashing cores through IPI   Per Fransson
• [PATCH] Add call to non-crashing cores through IPI   Per Fransson
• [PATCH] Add call to non-crashing cores through IPI   Per Fransson
• [PATCH] Add call to non-crashing cores through IPI   Per Fransson
• [PATCH] Add call to non-crashing cores through IPI   Per Fransson
• [PATCH v2] Add call to non-crashing cores through IPI   Per Fransson
• [PATCH v2] Add call to non-crashing cores through IPI   Per Fransson
• [PATCH v3 06/13] OMAP3: DMA: hwmod: add system DMA   G, Manjunath Kondaiah
• [PATCH v3 06/13] OMAP3: DMA: hwmod: add system DMA   G, Manjunath Kondaiah
• [PATCH v4 01/13] OMAP: DMA: Replace read/write macros with functions   G, Manjunath Kondaiah
• [PATCH v3 01/13] OMAP: DMA: Replace read/write macros with functions   G, Manjunath Kondaiah
• [PATCH v3 02/13] OMAP: DMA: Introduce errata handling feature   G, Manjunath Kondaiah
• [PATCH v3 08/13] OMAP1: DMA: Introduce DMA driver as platform device   G, Manjunath Kondaiah
• [PATCH v3 10/13] OMAP: DMA: Convert DMA library into DMA platform Driver   G, Manjunath Kondaiah
• [PATCH v3 13/13] OMAP: PM: DMA: Enable runtime pm   G, Manjunath Kondaiah
• [PATCH v3 00/13] OMAP: DMA: hwmod and DMA as platform device   G, Manjunath Kondaiah
• [PATCH v3 10/13] OMAP: DMA: Convert DMA library into DMA platform Driver   G, Manjunath Kondaiah
• [PATCH v3 01/13] OMAP: DMA: Replace read/write macros with functions   G, Manjunath Kondaiah
• [PATCH v3 10/13] OMAP: DMA: Convert DMA library into DMA platform Driver   G, Manjunath Kondaiah
• [PATCH v3 02/13] OMAP: DMA: Introduce errata handling feature   G, Manjunath Kondaiah
• [PATCH v3] OMAP2+: PM: omap device: API's for handling mstandby mode   G, Manjunath Kondaiah
• [PATCH] arm: Fix HAVE_S3C2410_WATCHDOG warnings   Abdoulaye Walsimou GAYE
• [PATCH] arm: Fix HAVE_S3C2410_WATCHDOG warnings   Abdoulaye Walsimou GAYE
• [PATCH v2] ARM: s3c2442: Setup gpio {set,get}_pull callbacks   Abdoulaye Walsimou GAYE
• [PATCH v3] ARM: s3c2442: Setup gpio {set,get}_pull callbacks   Abdoulaye Walsimou GAYE
• [GIT PULL] Samsung fixes for 2.6.37-rc2   Abdoulaye Walsimou GAYE
• [PATCH] omap: tidspbridge: fix build failure on MEMBLOCK_REAL_LIMIT   Anand Gadiyar
• [PATCH] omap: tidspbridge: fix build failure on MEMBLOCK_REAL_LIMIT   Gadiyar, Anand
• [PATCH 0/3] OMAP: DSS2: introduce dummy panel driver   Anand Gadiyar
• linux-next: omap2plus_defconfig not building   Anand Gadiyar
• [PATCH] arm: fix compilation warning during compilation   Gadiyar, Anand
• [PATCH] ARM: Temporary fix for broken arch reboot   Anand Gadiyar
• ARM: fix compile warning in mm/init.c   Anand Gadiyar
• ARM: fix compile warning in mm/init.c   Anand Gadiyar
• [PATCH v2] ARM: fix compile warning in mm/init.c   Anand Gadiyar
• [PATCH v3] ARM: fix compile warning in mm/init.c   Anand Gadiyar
• Single binary kernel for all i.MX   Gadiyar, Anand
• linux-next: omap2plus_defconfig not building   Anand Gadiyar
• linux-next: omap2plus_defconfig not building   Anand Gadiyar
• [PATCH 2/2] ARM: mmp2: add sd card to jasper   Zhangfei Gao
• PATCH 2/2] ARM: mmp2: add sd card to jasper   Zhangfei Gao
• [PATCH RESEND v5 4/5] omap: nand: ecc layout select from board file   Ghorai, Sukumar
• [PATCH RESEND v5 4/5] omap: nand: ecc layout select from board file   Ghorai, Sukumar
• [PATCH RESEND v5 4/5] omap: nand: ecc layout select from board file   Ghorai, Sukumar
• [PATCH RESEND v5 4/5] omap: nand: ecc layout select from board file   Ghorai, Sukumar
• [PATCH RESEND v5 4/5] omap: nand: ecc layout select from board file   Ghorai, Sukumar
• [PATCH v5 1/5] omap gpmc: enable irq mode in gpmc   Ghorai, Sukumar
• [PATCH v6 0/7] nand prefetch-irq support and ecc layout chanage   Sukumar Ghorai
• [PATCH 1/7] omap3630: nand: fix device size to work in polled mode   Sukumar Ghorai
• [PATCH 2/7] omap3: nand: configurable transfer type per board   Sukumar Ghorai
• [PATCH v6 3/7] omap: gpmc: enable irq mode in gpmc   Sukumar Ghorai
• [PATCH v6 4/7] omap3: nand: prefetch in irq mode support   Sukumar Ghorai
• [PATCH v6 5/7] omap3: nand: configurable fifo threshold to gain the throughput   Sukumar Ghorai
• [PATCH v6 6/7] omap: nand: ecc layout select from board file   Sukumar Ghorai
• [PATCH v6 7/7] omap: nand: making ecc layout as compatible with romcode ecc   Sukumar Ghorai
• [PATCH] ARM: Samsung: Make sure ASoC DMA device is prototyped   Liam Girdwood
• [alsa-devel] [PATCH] ASoC: fix SND_PXA2XX_LIB Kconfig warning   Liam Girdwood
• [PATCH] RFC: nomadik: expand timesource to 63 bits   Thomas Gleixner
• [PATCH] RFC: nomadik: expand timesource to 63 bits   Thomas Gleixner
• [PATCH] RFC: nomadik: expand timesource to 63 bits   Thomas Gleixner
• [PATCH] RFC: nomadik: expand timesource to 63 bits   Thomas Gleixner
• [PATCH] RFC: nomadik: expand timesource to 63 bits   Thomas Gleixner
• [question] NR_IRQS in genirq   Thomas Gleixner
• [question] NR_IRQS in genirq   Thomas Gleixner
• [PATCH] ARM: s3c2440: fix AC97 and camera clock registration   Fabian Godehardt
• [PATCH] ARM: s3c2440: fix AC97 and camera clock registration   Fabian Godehardt
• OMAP not resuming after waking from suspend to RAM after addition of the new OMAP serial drivers   Govindraj
• [Patch v1] AM35xx: Craneboard: Add USB EHCI support   Igor Grinberg
• [PATCH 6/7] i2c/pxa2xx: reset the chip if the bus is not free   Igor Grinberg
• [PATCH 6/7] i2c/pxa2xx: reset the chip if the bus is not free   Igor Grinberg
• [PATCH 1/1] ARM Orion: added Buffalo LS-CHL support   Simon Guinot
• [PATCH][ ARM cpu hotplug 1/2 ] extract common code for arm cpu hotplug   Vincent Guittot
• [PATCH][ ARM cpu hotplug 2/2 ] Use common cpu hotplug code for UX500   Vincent Guittot
• [PATCH][ ARM cpu hotplug 1/2 ] extract common code for arm cpu hotplug   Vincent Guittot
• Single binary kernel for all i.MX   Shawn Guo
• [RFC][PATCH 00/11] ARM: imx: Add initial i.MX28 support   Shawn Guo
• [PATCH 01/11] ARM: imx: Add basic definitions for i.MX28   Shawn Guo
• [PATCH 02/11] ARM: imx: Add support of interrupt controller ICOLL   Shawn Guo
• [PATCH 03/11] ARM: imx: Add reset routine for i.MX28   Shawn Guo
• [PATCH 04/11] ARM: imx: Add timer support for i.MX28   Shawn Guo
• [PATCH 05/11] ARM: imx: Add GPIO support for i.MX28   Shawn Guo
• [PATCH 06/11] ARM: imx: Add IOMUX support for i.MX28   Shawn Guo
• [PATCH 07/11] ARM: imx: Add support of uncompress print for i.MX28   Shawn Guo
• [PATCH 08/11] ARM: imx: Add clock support for i.MX28   Shawn Guo
• [PATCH 09/11] ARM: imx: Add memory map support for i.MX28   Shawn Guo
• [PATCH 10/11] ARM: imx: Add initial support of machine mx28evk   Shawn Guo
• [PATCH 11/11] ARM: imx: Add i.MX28 support into Kconfig and Makefile   Shawn Guo
• [RFC][PATCH 00/11] ARM: imx: Add initial i.MX28 support   Shawn Guo
• [RFC][PATCH 00/11] ARM: imx: Add initial i.MX28 support   Shawn Guo
• [PATCH 03/11] ARM: imx: Add reset routine for i.MX28   Shawn Guo
• [PATCH 00/51] some more imx patches for 2.6.38   Shawn Guo
• [PATCH 00/15] ARM: mxs: Add initial support for MX23 and MX28   Shawn Guo
• [PATCH 01/15] ARM: mxs: Add core definitions   Shawn Guo
• [PATCH 02/15] ARM: mxs: Add helper definition and function   Shawn Guo
• [PATCH 03/15] ARM: mxs: Add reset routines   Shawn Guo
• [PATCH 04/15] ARM: mxs: Add interrupt support   Shawn Guo
• [PATCH 05/15] ARM: mxs: Add low-level debug UART support   Shawn Guo
• [PATCH 06/15] ARM: mxs: Add timer support   Shawn Guo
• [PATCH 07/15] ARM: mxs: Add gpio support   Shawn Guo
• [PATCH 08/15] ARM: mxs: Add iomux support   Shawn Guo
• [PATCH 09/15] ARM: mxs: Add clock support   Shawn Guo
• [PATCH 10/15] ARM: mxs: Add static memory mapping   Shawn Guo
• [PATCH 11/15] ARM: mxs: Dynamically allocate duart devices   Shawn Guo
• [PATCH 12/15] ARM: mxs: Dynamically allocate fec devices   Shawn Guo
• [PATCH 13/15] ARM: mxs: Add initial mx23evk support   Shawn Guo
• [PATCH 14/15] ARM: mxs: Add initial mx28evk support   Shawn Guo
• [PATCH 15/15] ARM: mxs: Add build configuration for mxs   Shawn Guo
• [PATCH 28/51] ARM: mx25: dynamically allocate mxc-ehci devices   Shawn Guo
• [PATCH 01/15] ARM: mxs: Add core definitions   Shawn Guo
• [PATCH v2 01/15] ARM: mxs: Add core definitions   Shawn Guo
• [PATCH v2 02/15] ARM: mxs: Add helper definition and function   Shawn Guo
• [PATCH v2 03/15] ARM: mxs: Add reset routines   Shawn Guo
• [PATCH v2 06/15] ARM: mxs: Add timer support   Shawn Guo
• [PATCH v2 10/15] ARM: mxs: Add static memory mapping   Shawn Guo
• [PATCH v2 15/15] ARM: mxs: Add build configuration for mxs   Shawn Guo
• S3C2416 clock tree   Dron Gus
• [PATCH] [ARM] twd: Allow twd rescaling to match cpu frequency   Harald Gustafsson
• [PATCH] [ARM] twd: Allow twd rescaling to match cpu frequency   Harald Gustafsson
• [PATCH 2/2] imx: fix USB build when USB gadget is selected   Anatolij Gustschin
• [PATCH] arm: Export dma_set_coherent_mask() implementations   Krzysztof Halasa
• [RFC][PATCH 1/1] ARM: Add initial hibernation support   MyungJoo Ham
• [patch v3 01/10] efikamx: read board id   Sascha Hauer
• [patch v4 06/10] efikamx: add leds support   Sascha Hauer
• [PATCH] ARM: imx: Add support for low power suspend on MX51.   Sascha Hauer
• [PATCH] i.MX SDMA without firmware   Sascha Hauer
• [PATCH 1/2] dmaengine i.MX SDMA: Allow to run without firmware   Sascha Hauer
• [PATCH 2/2] ARM i.MX SDMA: Add ROM script addresses to platform_data   Sascha Hauer
• i.MX patches for -rc   Sascha Hauer
• [PATCH 1/3] ARM mx3fb: check for DMA engine type   Sascha Hauer
• [PATCH 2/3] ARM i.MX: sdma is merged, so remove #ifdef SDMA_IS_MERGED   Sascha Hauer
• [PATCH 3/3] ARM i.MX pcm037 eet: compile fixes   Sascha Hauer
• [PATCH 1/3] ARM mx3fb: check for DMA engine type   Sascha Hauer
• more i.MX patches for -rc   Sascha Hauer
• [PATCH 1/3] ARM mx3_camera: check for DMA engine type   Sascha Hauer
• [PATCH 2/3] ARM i.MX27 eukrea: Fix compilation   Sascha Hauer
• [PATCH 3/3] ARM i.MX spi: fix compilation for i.MX21   Sascha Hauer
• i.MX patches for next   Sascha Hauer
• [PATCH 1/7] ARM i.MX51 boards: Do not use PHYS_OFFSET   Sascha Hauer
• [PATCH 2/7] ARM i.MX irq: Compile avic irq code only on SoCs that need it   Sascha Hauer
• [PATCH 3/7] ARM i.MX51: Make CONFIG_MXC_TZIC an invisible option   Sascha Hauer
• [PATCH 4/7] ARM i.MX irq: Allow runtime decision between AVIC and TZIC   Sascha Hauer
• [PATCH 5/7] ARM i.MX DMA: return gracefully on different socs   Sascha Hauer
• [PATCH 6/7] ARM i.MX51: return gracefully on different socs   Sascha Hauer
• [PATCH 7/7] ARM i.MX27 pm: return gracefully on different socs   Sascha Hauer
• [PATCH 4/7] ARM i.MX irq: Allow runtime decision between AVIC and TZIC   Sascha Hauer
• [PATCH 1/3] ARM mx3_camera: check for DMA engine type   Sascha Hauer
• Single binary kernel for all i.MX   Sascha Hauer
• Single binary kernel for all i.MX   Sascha Hauer
• Single binary kernel for all i.MX   Sascha Hauer
• [PATCHv3 1/2] ARM: imx: Add core definitions for MX53   Sascha Hauer
• [PATCHv3 2/2] ARM: imx: Add mx53 support to common msl functions.   Sascha Hauer
• [PATCHv2] ARM: imx: Add support for low power suspend on MX51.   Sascha Hauer
• [PATCHv3 2/2] ARM: imx: Add mx53 support to common msl functions.   Sascha Hauer
• [PATCH] ARM: add support for uncompressed uImage kernel   Sascha Hauer
• Patch IMX audmux debugfs.   Sascha Hauer
• [PATCHv3 1/2] ARM: imx: Add core definitions for MX53   Sascha Hauer
• [PATCHv3 1/2] ARM: imx: Add core definitions for MX53   Sascha Hauer
• Patch IMX audmux debugfs.   Sascha Hauer
• Pull Request i.MX   Sascha Hauer
• [RFC][PATCH 00/11] ARM: imx: Add initial i.MX28 support   Sascha Hauer
• [PATCH] ARM i.MX: consolidate chip revision macros   Sascha Hauer
• [PATCH 00/51] some more imx patches for 2.6.38   Sascha Hauer
• [PATCH 3/5] mx51: Add mx51 processor to the pwm driver   Sascha Hauer
• [PATCH 0/5] mx51: Add PWM support   Sascha Hauer
• [PATCH] mx51_babbage: Add AT24C512 EEPROM support   Sascha Hauer
• [PATCH 0/5] mx51: Add PWM support   Sascha Hauer
• Pull Request i.MX   Sascha Hauer
• [PATCH] MXC IOMUX-V3 replace struct pad_desc with bitmapped cookie (step 2)   Sascha Hauer
• [patch 1/1] iMX51: introduce MX51_GPIO_NR   Sascha Hauer
• [PATCH 1/1] arm: imx: share imx5x_register_gpios for mach-mx5   Sascha Hauer
• [patch 1/1] iMX51: introduce MX51_GPIO_NR   Sascha Hauer
• MX25 patches   Sascha Hauer
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Sascha Hauer
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Sascha Hauer
• [PATCH] mc13892 regulator enable on mx51 babbage board   Sascha Hauer
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Sascha Hauer
• Cannot detect SATA disks w/ CONFIG_SATA_PMP w/o actually using SATA multiplier   Tejun Heo
• Cannot detect SATA disks w/ CONFIG_SATA_PMP w/o actually using SATA multiplier   Tejun Heo
• arm smp support patch   Rob Herring
• arm smp support patch   Rob Herring
• [PATCH][ ARM cpu hotplug 1/2 ] extract common code for arm cpu hotplug   Rob Herring
• [PATCH v2 2/4] OMAP3: PM: update DSP reset code to use new SCM DSP boot control functions   Kevin Hilman
• [PATCH v3 06/13] OMAP3: DMA: hwmod: add system DMA   Kevin Hilman
• [PATCH] OMAP3: I2C: hwmod: Fix PRCM module offset   Kevin Hilman
• [PATCH v3 5/5] OMAP: I2C: Convert i2c driver to use PM runtime api's   Kevin Hilman
• [PATCH v3 01/13] OMAP: DMA: Replace read/write macros with functions   Kevin Hilman
• [PATCH v3 03/13] OMAP: DMA: Introduce DMA device attributes   Kevin Hilman
• [PATCH v3 02/13] OMAP: DMA: Introduce errata handling feature   Kevin Hilman
• [PATCH v3 08/13] OMAP1: DMA: Introduce DMA driver as platform device   Kevin Hilman
• [PATCH v3 10/13] OMAP: DMA: Convert DMA library into DMA platform Driver   Kevin Hilman
• [PATCH v3 13/13] OMAP: PM: DMA: Enable runtime pm   Kevin Hilman
• [PATCH v3 00/13] OMAP: DMA: hwmod and DMA as platform device   Kevin Hilman
• [PATCH v3 04/13] OMAP2420: DMA: hwmod: add system DMA   Kevin Hilman
• [PATCH v3 10/13] OMAP: DMA: Convert DMA library into DMA platform Driver   Kevin Hilman
• [PATCH v3 01/13] OMAP: DMA: Replace read/write macros with functions   Kevin Hilman
• [PATCH v3 13/13] OMAP: PM: DMA: Enable runtime pm   Kevin Hilman
• [PATCH v3 10/13] OMAP: DMA: Convert DMA library into DMA platform Driver   Kevin Hilman
• [PATCH v3 02/13] OMAP: DMA: Introduce errata handling feature   Kevin Hilman
• [PATCH v3 01/13] OMAP: DMA: Replace read/write macros with functions   Kevin Hilman
• [PATCH v3 10/13] OMAP: DMA: Convert DMA library into DMA platform Driver   Kevin Hilman
• [PATCH v3 04/13] OMAP2420: DMA: hwmod: add system DMA   Kevin Hilman
• [PATCH] omap4: enable L2 prefetching   Kevin Hilman
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Kevin Hilman
• [PATCH] davinci: kconfig: select at24 eeprom for selected boards   Kevin Hilman
• [Patch v2] AM35xx: Craneboard: Add USB EHCI support   Kevin Hilman
• [PATCH 2/5] omap4: l2x0: Construct the AUXCTRL value using defines   Kevin Hilman
• [PATCH 0/8] OMAP2+: hwmod core upgrades for 2.6.38: first set   Kevin Hilman
• [PATCH] OMAP: UART: don't resume UARTs that are not enabled.   Kevin Hilman
• OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled   Kevin Hilman
• [PATCH v7 00/11] OMAP: GPIO: Implement GPIO as a platform device   Kevin Hilman
• [PATCH v7 00/11] OMAP: GPIO: Implement GPIO as a platform device   Kevin Hilman
• [PATCH] arm: plat-omap: counter_32k: use IS_ERR() instead of NULL check   Kevin Hilman
• [RFC 0/2] Selective identity mapping for kexec   Simon Horman
• [RFC 0/2] Selective identity mapping for kexec   Simon Horman
• [patch v3 0/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM   Simon Horman
• [patch v3 2/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM   Simon Horman
• [patch v3 2/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM   Simon Horman
• [patch v4 0/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM   Simon Horman
• [patch v4 1/2] ARM: Add zboot support for SuperH Mobile ARM   Simon Horman
• [patch v4 2/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM   Simon Horman
• MX51: add FIQ support for TZIC   Peter Horton
• MX51: add FIQ support for TZIC   Peter Horton
• MX51: add FIQ support for TZIC   Peter Horton
• [PATCH 1/1] ARM Orion: added Buffalo LS-CHL support   Ash Hughes
• [PATCH 1/1] ARM Orion: added Buffalo LS-CHL support   Ash Hughes
• [PATCH v5 2/3] OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish   Adrian Hunter
• [PATCH v5 2/3] OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish   Adrian Hunter
• [PATCH v5 2/3] OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish   Adrian Hunter
• [PATCH] arm: Export dma_set_coherent_mask() implementations   Ben Hutchings
• [PATCH] econet: Move to staging; remove from defconfig   Ben Hutchings
• [PATCH] econet: Move to staging; remove from defconfig   Ben Hutchings
• [PATCH] econet: Move to staging; remove from defconfig   Ben Hutchings
• [PATCH] econet: Move to staging; remove from defconfig   Ben Hutchings
• [PATCH 2/3] OMAP: DSS2: remove dummy panel driver duplicated panel drivers   Grazvydas Ignotas
• [PATCH 1/3] OMAP: DSS2: Add dummy panel display driver   Grazvydas Ignotas
• [PATCH RESEND v5 4/5] omap: nand: ecc layout select from board file   Grazvydas Ignotas
• [PATCH RESEND v5 4/5] omap: nand: ecc layout select from board file   Grazvydas Ignotas
• [PATCH RESEND v5 4/5] omap: nand: ecc layout select from board file   Grazvydas Ignotas
• [PATCH RESEND v5 4/5] omap: nand: ecc layout select from board file   Grazvydas Ignotas
• [PATCH RESEND v5 4/5] omap: nand: ecc layout select from board file   Grazvydas Ignotas
• [PATCH RESEND v5 4/5] omap: nand: ecc layout select from board file   Grazvydas Ignotas
• [Questions] How to run 'perf top' on ARM to profile kernel functions with modules loaded   Jamie Iles
• [Questions] How to run 'perf top' on ARM to profile kernel functions with modules loaded   Jamie Iles
• [PATCH 2/5] ARM: perf: avoid exposing internal stop function for v6 PMU   Jamie Iles
• [PATCH 4/5] ARM: perf: encode PMU name in arm_pmu structure   Jamie Iles
• [PATCH 1/5] ARM: perf: consolidate common PMU behaviour   Jamie Iles
• [PATCH 3/5] ARM: perf: add _init() functions to PMUs   Jamie Iles
• [PATCH] debug-8250: add a 32 bit mode   Jamie Iles
• ARM: add initial support for Picochip picoXcell SoC   Jamie Iles
• [RFC PATCH 01/13] picoxcell: add support for picoXcell   Jamie Iles
• [RFC PATCH 02/13] picoxcell: add support for AXI bus snoopers   Jamie Iles
• [RFC PATCH 03/13] picoxcell: add support for the system timers   Jamie Iles
• [RFC PATCH 04/13] picoxcell: add a pin muxing infrastructure   Jamie Iles
• [RFC PATCH 05/13] picoxcell: add gpio infrastructure   Jamie Iles
• [RFC PATCH 06/13] picoxcell: add support for system clks   Jamie Iles
• [RFC PATCH 07/13] picoxcell: add common SoC devices   Jamie Iles
• [RFC PATCH 08/13] picoxcell: add cpufreq support   Jamie Iles
• [RFC PATCH 09/13] picoxcell: add support for pm   Jamie Iles
• [RFC PATCH 10/13] picoxcell: add chained GPIO IRQ handlers   Jamie Iles
• [RFC PATCH 11/13] picoxcell: add support for pc3x2 devices   Jamie Iles
• [RFC PATCH 12/13] picoxcell: add support for pc3x3 devices   Jamie Iles
• [RFC PATCH 13/13] picoxcell: add support for the PC7302 development board   Jamie Iles
• [PATCH] picoxcell: add support for picoXcell   Jamie Iles
• [RFC PATCHv2] picoxcell: add support for the system timers   Jamie Iles
• [RFC PATCHv2] picoxcell: add common SoC devices   Jamie Iles
• [RFC PATCHv2] picoxcell: add support for pc3x3 devices   Jamie Iles
• [PATCH 5/8] ARM: hw_breakpoint: don't advertise reserved breakpoints   Jamie Iles
• ARM perf events spin locks   Jamie Iles
• ARM perf events spin locks   Jamie Iles
• [PATCH 5/8] ARM: hw_breakpoint: don't advertise reserved breakpoints   Jamie Iles
• ARM perf events spin locks   Jamie Iles
• [RFC PATCHv2 05/13] picoxcell: add gpio infrastructure   Jamie Iles
• [RFC PATCHv2 10/13] picoxcell: add chained GPIO IRQ handlers   Jamie Iles
• [PATCH 1/3] Backlight: driver for Sharp LS037V7DW01 panel on OMAP machine   Janorkar, Mayuresh
• [PATCH] ARM: imx: fix ehci-mxc build.   Zhang Jiejing
• [PATCH] ARM: imx: fix ehci-mxc build.   Zhang Jiejing
• [PATCH 04/07] ARM: Use shared GIC entry macros on Tegra   Olof Johansson
• [PATCH v2] Add call to non-crashing cores through IPI   Olof Johansson
• [PATCH v7 01/11] OMAP: GPIO: prepare for platform driver   Olof Johansson
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Olof Johansson
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Olof Johansson
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Olof Johansson
• [PATCH v2] Add call to non-crashing cores through IPI   Olof Johansson
• [PATCH] ARM: Fix find_next_zero_bit and related assembly   James Jones
• [PATCH] ARM: Fix find_next_zero_bit and related assembly   James Jones
• [PATCH] ARM: Fix find_next_zero_bit and related assembly   James Jones
• [PATCH 0/3] regulators: Update of ab8500 driver   Bengt Jonsson
• [PATCH 1/3] mfd: Added new regulator_data pointer to ab8500 board configuration   Bengt Jonsson
• [PATCH 2/3] regulators: Update of ab8500 driver   Bengt Jonsson
• [PATCH 3/3] mach-ux500: Updated and added regulator board configuration in ab8500   Bengt Jonsson
• [PATCH 2/3] regulators: Update of ab8500 driver   Bengt Jonsson
• [PATCH 1/3] mfd: Added new regulator_data pointer to ab8500 board configuration   Bengt Jonsson
• [PATCH 2/3] regulators: Update of ab8500 driver   Bengt Jonsson
• [PATCH 1/3] mfd: Added new regulator_data pointer to ab8500 board configuration   Bengt Jonsson
• [PATCH RFC] ARM ETM driver: Do not deref potentially null pointer and don't allocate and free mem while holding lock.   Jesper Juhl
• [PATCH RFC] ARM ETM driver: Do not deref potentially null pointer and don't allocate and free mem while holding lock.   Jesper Juhl
• [PATCH][trivial] ARM, mm: Don't include smp_plat.h twice in flush.c   Jesper Juhl
• [PATCH] pl011: added clock management feature   Greg KH
• [PATCH] pl011: added clock management feature   Greg KH
• [PATCH] Documentation about RS485 serial communications   Greg KH
• [PATCH 00/02] staging: tidspbridge: 2.6.37-rcX fixes   Greg KH
• [PATCH TRIVIAL] AT91: usb: fix typo in atmel_usba_udc driver   Greg KH
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   Greg KH
• [stable] Patch Upstream: oprofile, ARM: Release resources on failure   Greg KH
• [PATCH v3 1/1] USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs   Greg KH
• [PATCH v3 1/1] USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs   Greg KH
• [PATCH] econet: Move to staging; remove from defconfig   Greg KH
• [PATCH] econet: Move to staging; remove from defconfig   Greg KH
• [PATCH 09/10] MCDE: Add build files and bus   Greg KH
• [PATCH 09/10] MCDE: Add build files and bus   Greg KH
• [PATCH 09/10] MCDE: Add build files and bus   Greg KH
• [PATCH 09/10] MCDE: Add build files and bus   Greg KH
• [RFC v2 5/8] TILER-DMM: TILER interface file and documentation   Greg KH
• [RFC v2 6/8] TILER-DMM: Geometry and view manipulation functions   Greg KH
• [RFC v2 8/8] TILER-DMM: Linking TILER driver into the Linux kernel build   Greg KH
• [PATCH V2] ARM: SAMSUNG: Add support for clock debugging through debug-fs interface   Amit Daniel Kachhap
• [PATCH] arm: export dma_set_coherent_mask   Imre Kaloz
• [patch 1/1] Fix ixp4xx build failure of some modules   Imre Kaloz
• [PATCH] arm: ixp4xx export symbol dma_set_coherent_mask   Imre Kaloz
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Kamoolkar, Mugdha
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Kamoolkar, Mugdha
• [PATCH 0/6] [v2] omap:mailbox-enhancements and fixes   Hari Kanigeri
• [PATCH 1/6] mailbox: change full flag per mailbox queue instead of global   Hari Kanigeri
• [PATCH 2/6] omap:mailbox: fix rx interrupt disable in omap4   Hari Kanigeri
• [PATCH 3/6] omap:mailbox-fix checkpatch warnings   Hari Kanigeri
• [PATCH 4/6] omap:mailbox-send message in process context   Hari Kanigeri
• [PATCH 5/6] omap:mailbox-add notification support for multiple readers   Hari Kanigeri
• [PATCH 6/6] omap:clocks44x-add dummy clock for mailbox   Hari Kanigeri
• [PATCH 0/6] [v2] omap:mailbox-enhancements and fixes   Hari Kanigeri
• [PATCH 0/6] [v2] OMAP: mailbox: enhancements and fixes   Hari Kanigeri
• [PATCH v2 1/6] OMAP: mailbox: change full flag per mailbox queue instead of global   Hari Kanigeri
• [PATCH v2 2/6] OMAP: mailbox: fix rx interrupt disable in omap4   Hari Kanigeri
• [PATCH v2 3/6] OMAP: mailbox: fix checkpatch warnings   Hari Kanigeri
• [PATCH v2 4/6] OMAP: mailbox: send message in process context   Hari Kanigeri
• [PATCH v2 5/6] OMAP: mailbox: add notification support for multiple readers   Hari Kanigeri
• [PATCH v2 6/6] OMAP4: clocks: add dummy clock for mailbox   Hari Kanigeri
• [PATCH 0/6] [v2] OMAP: mailbox: enhancements and fixes   Hari Kanigeri
• [PATCH 6/6] omap:clocks44x-add dummy clock for mailbox   Hari Kanigeri
• [PATCH v3 0/5] OMAP: mailbox: enhancements and fixes   Hari Kanigeri
• [PATCH v3 1/5] OMAP: mailbox: change full flag per mailbox queue instead of global   Hari Kanigeri
• [PATCH v3 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Hari Kanigeri
• [PATCH v3 3/5] OMAP: mailbox: fix checkpatch warnings   Hari Kanigeri
• [PATCH v3 4/5] OMAP: mailbox: send message in process context   Hari Kanigeri
• [PATCH v3 5/5] OMAP: mailbox: add notification support for multiple readers   Hari Kanigeri
• [PATCH] OMAP4: clocks: add dummy clock for mailbox   Hari Kanigeri
• [PATCH] OMAP4: clocks: add dummy clock for mailbox   Kanigeri, Hari
• [PATCH v3 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Kanigeri, Hari
• [PATCH] ARM: l2x0: Check the correct address range   Kanigeri, Hari
• [PATCH v3 5/5] OMAP: mailbox: add notification support for multiple readers   Kanigeri, Hari
• [PATCH v3 3/5] OMAP: mailbox: fix checkpatch warnings   Kanigeri, Hari
• [PATCH v3 5/5] OMAP: mailbox: add notification support for multiple readers   Kanigeri, Hari
• [PATCH v3 5/5] OMAP: mailbox: add notification support for multiple readers   Kanigeri, Hari
• [PATCH v3 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Kanigeri, Hari
• [PATCH v3 5/5] OMAP: mailbox: add notification support for multiple readers   Kanigeri, Hari
• [PATCH v3 5/5] OMAP: mailbox: add notification support for multiple readers   Kanigeri, Hari
• [PATCH v3 5/5] OMAP: mailbox: add notification support for multiple readers   Kanigeri, Hari
• [PATCH v3 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Kanigeri, Hari
• [PATCH v3 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Kanigeri, Hari
• [PATCH v4 0/5] OMAP: mailbox: fixes and enhancements   Hari Kanigeri
• [PATCH v4 1/5] OMAP: mailbox: change full flag per mailbox queue instead of global   Hari Kanigeri
• [PATCH v4 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Hari Kanigeri
• [PATCH v4 3/5] OMAP: mailbox: fix checkpatch warnings   Hari Kanigeri
• [PATCH v4 4/5] OMAP: mailbox: send message in process context   Hari Kanigeri
• [PATCH v4 5/5] OMAP: mailbox: add notification support for multiple readers   Hari Kanigeri
• [PATCH v4 1/5] OMAP: mailbox: change full flag per mailbox queue instead of global   Kanigeri, Hari
• [PATCH v4 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Kanigeri, Hari
• [PATCH v4 5/5] OMAP: mailbox: add notification support for multiple readers   Kanigeri, Hari
• [PATCH v4 4/5] OMAP: mailbox: send message in process context   Kanigeri, Hari
• [PATCH v4 5/5] OMAP: mailbox: add notification support for multiple readers   Kanigeri, Hari
• [PATCH v4 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Hari Kanigeri
• [PATCH v5 0/4] OMAP: mailbox: fixes and enhancements   Hari Kanigeri
• [PATCH v5 1/4] OMAP: mailbox: change full flag per mailbox queue instead of global   Hari Kanigeri
• [PATCH v5 2/4] OMAP: mailbox: fix checkpatch warnings   Hari Kanigeri
• [PATCH v5 3/4] OMAP: mailbox: send message in process context   Hari Kanigeri
• [PATCH v5 4/4] OMAP: mailbox: add notification support for multiple readers   Hari Kanigeri
• [PATCH] ARM: Common GIC entry macro code   Srinidhi Kasagar
• [PATCH 1/3] Add a common struct clk   Jeremy Kerr
• [PATCH] MMC: Fix multiblock SDIO transfers in AT91 MCI   Yauhen Kharuzhy
• [PATCH 01/10] SMDK2416: Select MACH_SMDK, S3C_DEV_NAND, S3C_DEV_USB_HOST   Yauhen Kharuzhy
• [PATCH 02/10] ARM S3C2416: Add address map and clock definitions for HSMMC0   Yauhen Kharuzhy
• [PATCH 03/10] ARM: S3C2416: Add platform helpers for setup SDHCI   Yauhen Kharuzhy
• [PATCH 04/10] ARM: S3C2416: Add support of SD/MMC card detect on SMDK2416   Yauhen Kharuzhy
• [PATCH 05/10] ARM S3C2443: Select properly ARM core type   Yauhen Kharuzhy
• [PATCH 06/10] ARM S3C24XX: Compile NAND device definition for SMDK boards   Yauhen Kharuzhy
• [PATCH 07/10] ARM S3C2443: Implement GPIO pull-up/down configuration methods   Yauhen Kharuzhy
• [PATCH 08/10] ARM SAMSUNG: Don't export __init functions to modules   Yauhen Kharuzhy
• [PATCH 09/10] ARM S3C2412: Fix typo in CONFIG_CPU_S3C2412_ONLY definition   Yauhen Kharuzhy
• [PATCH 10/10] RTC S3C: Fix type of s3c_rtc_setaie()   Yauhen Kharuzhy
• [PATCH 10/10] RTC S3C: Fix type of s3c_rtc_setaie()   Yauhen Kharuzhy
• [PATCH 01/10] SMDK2416: Select MACH_SMDK, S3C_DEV_NAND, S3C_DEV_USB_HOST   Yauhen Kharuzhy
• [PATCH 05/10] ARM S3C2443: Select properly ARM core type   Yauhen Kharuzhy
• [PATCH] ARM S3C24XX: Fix compilation of PM code for S3C2416   Yauhen Kharuzhy
• [PATCH 02/10] ARM S3C2416: Add address map and clock definitions for HSMMC0   Yauhen Kharuzhy
• [PATCH 06/10] ARM S3C24XX: Compile NAND device definition for SMDK boards   Yauhen Kharuzhy
• [PATCH 03/10] ARM: S3C2416: Add platform helpers for setup SDHCI   Yauhen Kharuzhy
• [PATCH v2] ARM: s3c2442: Setup gpio {set,get}_pull callbacks   Vasily Khoruzhick
• Build error with s3c2410_defconfig   Vasily Khoruzhick
• [PATCH v2] ARM: s3c2442: Setup gpio {set,get}_pull callbacks   Vasily Khoruzhick
• [PATCH v3] ARM: s3c2442: Setup gpio {set,get}_pull callbacks   Vasily Khoruzhick
• [PATCH 1/2] ARM: S3C2410: H1940: Adapt h1940-bluetooth to gpiolib changes   Vasily Khoruzhick
• [PATCH 2/2] h1940-leds: Fix compile issue introduced by latch-related changes   Vasily Khoruzhick
• [PATCH 2/2] h1940-leds: Fix compile issue introduced by latch-related changes   Vasily Khoruzhick
• [PATCH] ARM: s3x24xx: Fix gpiochip_add complaining.   Vasily Khoruzhick
• [PATCH] ARM: s3x24xx: Fix gpiochip_add complaining.   Vasily Khoruzhick
• [PATCH v3] ARM: s3c2442: Setup gpio {set,get}_pull callbacks   Vasily Khoruzhick
• [PATCH RESEND v3] ARM: s3c2442: Setup gpio {set,get}_pull callbacks   Vasily Khoruzhick
• [PATCH v3] ARM: s3c2442: Setup gpio {set,get}_pull callbacks   Vasily Khoruzhick
• [PATCH RESEND v3] ARM: s3c2442: Setup gpio {set, get}_pull callbacks   Vasily Khoruzhick
• [PATCH RESEND v3] ARM: s3c2442: Setup gpio {set, get}_pull callbacks   Vasily Khoruzhick
• [PATCH RESEND v3] ARM: s3c2442: Setup gpio {set, get}_pull callbacks   Vasily Khoruzhick
• [PATCH v4] ARM: s3c244x: Fix mess with gpio {set,get}_pull callbacks   Vasily Khoruzhick
• [PATCH v4] ARM: s3c244x: Fix mess with gpio {set, get}_pull callbacks   Vasily Khoruzhick
• [PATCH v5] ARM: s3c244x: Fix mess with gpio {set,get}_pull callbacks   Vasily Khoruzhick
• Build error with s3c2410_defconfig   Kukjin Kim
• [PATCH] ARM: Common GIC entry macro code V2   Kukjin Kim
• [PATCH 3/4] s3c-fb: Add support S5PV310 FIMD   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Fix HAVE_S3C2410_I2C warnings   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Fix HAVE_S3C_RTC warnings   Kukjin Kim
• [PATCH] arm: Fix HAVE_S3C2410_WATCHDOG warnings   Kukjin Kim
• [PATCH 2/2] h1940-leds: Fix compile issue introduced by latch-related changes   Kukjin Kim
• [PATCH 8/9] ARM: S5PV210: I2S: Upgrade platform device   Kukjin Kim
• [PATCH V2] s3c-fb: Add support S5PV310 FIMD   Kukjin Kim
• [GIT PULL] Samsung fixes for 2.6.37-rc2   Kukjin Kim
• [PATCH 0/3] rtc: rtc-s3c: Fix and Update s3c_rtc_setaie()   Kukjin Kim
• [PATCH 1/3] rtc: rtc-s3c: Fix return type and argument of s3c_rtc_setaie   Kukjin Kim
• [PATCH 2/3] rtc: rtc-s3c: Add spin_lock_irq in s3c_rtc_setaie   Kukjin Kim
• [PATCH 3/3] rtc: rtc-s3c: Change set alarm interrupt method in s3c_rtc_setaie   Kukjin Kim
• [GIT PULL] Samsung fixes for 2.6.37-rc2   Kukjin Kim
• [GIT PULL] Samsung fixes for 2.6.37-rc2   Kukjin Kim
• [PATCH] ARM: S3C64XX: fix uart clock setup for mini6410/real6410   Kukjin Kim
• [PATCH 1/2] ARM: S3C2410: H1940: Adapt h1940-bluetooth to gpiolib changes   Kukjin Kim
• [PATCH] ARM: S5PV310: Set bit 22 in the PL310 (cache controller) AuxCtlr register   Kukjin Kim
• [PATCH 1/9] S5PV310: DMA: Add platform devices for PL330 DMACs   Kukjin Kim
• [PATCH 2/3] S5PV210: added parameters for CPU interface to plat-samsung/fb.h   Kukjin Kim
• [PATCH 3/3] S5PV210: added MIPI-DSI Driver.   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Add support for clock debugging through debug-fs interface   Kukjin Kim
• [PATCH] ARM: s5pv310: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL   Kukjin Kim
• [PATCH] ARM: Samsung: Make sure ASoC DMA device is prototyped   Kukjin Kim
• [PATCH 0/4] S5PC110: MIPI-DSI support.   Kukjin Kim
• [GIT PULL] Samsung fixes for 2.6.37-rc4   Kukjin Kim
• [PATCH] ARM: s3x24xx: Fix gpiochip_add complaining.   Kukjin Kim
• [PATCH] ARM: s3c2440: fix AC97 and camera clock registration   Kukjin Kim
• [Question] Local Timer based on SPI   Kukjin Kim
• [PATCH v3] ARM: s3c2442: Setup gpio {set,get}_pull callbacks   Kukjin Kim
• [Question] Local Timer based on SPI   Kukjin Kim
• [PATCH 10/10] RTC S3C: Fix type of s3c_rtc_setaie()   Kukjin Kim
• [PATCH 01/10] SMDK2416: Select MACH_SMDK, S3C_DEV_NAND, S3C_DEV_USB_HOST   Kukjin Kim
• [PATCH 05/10] ARM S3C2443: Select properly ARM core type   Kukjin Kim
• [GIT PULL] Samsung fixes for 2.6.37-rc4   Kukjin Kim
• [PATCH RESEND v3] ARM: s3c2442: Setup gpio {set, get}_pull callbacks   Kukjin Kim
• [PATCH 02/10] ARM S3C2416: Add address map and clock definitions for HSMMC0   Kukjin Kim
• [PATCH 03/10] ARM: S3C2416: Add platform helpers for setup SDHCI   Kukjin Kim
• [PATCH 09/10] ARM S3C2412: Fix typo in CONFIG_CPU_S3C2412_ONLY definition   Kukjin Kim
• [PATCH 06/10] ARM S3C24XX: Compile NAND device definition for SMDK boards   Kukjin Kim
• [PATCH 07/10] ARM S3C2443: Implement GPIO pull-up/down configuration methods   Kukjin Kim
• [PATCH 1/2] Fix the I-cache invalidation on ARMv6 and later CPUs   Minchan Kim
• [PATCH 1/2] Fix the I-cache invalidation on ARMv6 and later CPUs   Minchan Kim
• [PATCH 1/2] Fix the I-cache invalidation on ARMv6 and later CPUs   Minchan Kim
• [PATCH 1/2] Fix the I-cache invalidation on ARMv6 and later CPUs   Minchan Kim
• [patch v4 06/10] efikamx: add leds support   Uwe Kleine-König
• [patch v3 01/10] efikamx: read board id   Uwe Kleine-König
• boot decompressor code error   Uwe Kleine-König
• [patch 1/1] imx: fix iomux v3   Uwe Kleine-König
• [PATCH] mx51_3ds: Add esdhc support   Uwe Kleine-König
• [PATCH v2] mx51_3ds: Add esdhc support   Uwe Kleine-König
• [PATCH v3] mx51_3ds: Add esdhc support   Uwe Kleine-König
• [PATCH] pcmcia/sa1100: don't put machine specific init functions in .init.text   Uwe Kleine-König
• [PATCH] pcmcia/sa1100: don't put machine specific init functions in .init.text   Uwe Kleine-König
• [PATCH] ARM: pxa: fix the building failue on saar   Uwe Kleine-König
• [PATCH 3/3] ARM i.MX pcm037 eet: compile fixes   Uwe Kleine-König
• [PATCH 2/3] ARM i.MX: sdma is merged, so remove #ifdef SDMA_IS_MERGED   Uwe Kleine-König
• [PATCH 1/7] ARM i.MX51 boards: Do not use PHYS_OFFSET   Uwe Kleine-König
• [PATCH 4/7] ARM i.MX irq: Allow runtime decision between AVIC and TZIC   Uwe Kleine-König
• [PATCH 3/3] ARM i.MX spi: fix compilation for i.MX21   Uwe Kleine-König
• [PATCH 4/7] ARM i.MX irq: Allow runtime decision between AVIC and TZIC   Uwe Kleine-König
• [PATCH] mach-pcm037_eet: Fix section mismatch for eet_init_devices()   Uwe Kleine-König
• [PATCH] arch/arm/plat-mxc/cpufreq.c: Fix line continuation defect   Uwe Kleine-König
• [PATCH] arm: fix compilation warning during compilation   Uwe Kleine-König
• [PATCH 6/6] ARM: ftrace: enable function graph tracer   Uwe Kleine-König
• linux-next: omap2plus_defconfig not building   Uwe Kleine-König
• One quick quenstion about PXA sched_clock resolution?   Uwe Kleine-König
• [PATCH 1/2] mx25: fix spi device registration typo   Uwe Kleine-König
• [PATCH] ARM: add support for uncompressed uImage kernel   Uwe Kleine-König
• [PATCH] ARM: add support for uncompressed uImage kernel   Uwe Kleine-König
• [PATCHv3 2/2] ARM: imx: Add mx53 support to common msl functions.   Uwe Kleine-König
• [PATCH] mx51_babbage: Add SPI flash support   Uwe Kleine-König
• [PATCHv4 1/3] ARM: imx: Add core definitions for MX53   Uwe Kleine-König
• [PATCHv4 3/3] ARM: imx: Get the silicon version from the IIM module   Uwe Kleine-König
• ARM: fix compile warning in mm/init.c   Uwe Kleine-König
• [PATCH v2] ARM: fix compile warning in mm/init.c   Uwe Kleine-König
• [PATCH] RFC: nomadik: expand timesource to 63 bits   Uwe Kleine-König
• [PATCH v3] ARM: fix compile warning in mm/init.c   Uwe Kleine-König
• Single binary kernel for all i.MX   Uwe Kleine-König
• Single binary kernel for all i.MX   Uwe Kleine-König
• [PATCH 2.6.36 1/1 RESEND] kernel SPIN_LOCK_UNLOCKED changed to __SPIN_LOCK_UNLOCKED()   Uwe Kleine-König
• [PATCH 1/1] ARM: cns3xxx: Fixup the missing second parameter to addruart macro to allow them to build.   Uwe Kleine-König
• [PATCH 1/1] ARM: cns3xxx: Fixup the missing second parameter to addruart macro to allow them to build.   Uwe Kleine-König
• [PATCH] mx35_3ds: Add watchdog support   Uwe Kleine-König
• [PATCH 01/11] ARM: imx: Add basic definitions for i.MX28   Uwe Kleine-König
• [PATCH 02/11] ARM: imx: Add support of interrupt controller ICOLL   Uwe Kleine-König
• [PATCH 03/11] ARM: imx: Add reset routine for i.MX28   Uwe Kleine-König
• [PATCH 04/11] ARM: imx: Add timer support for i.MX28   Uwe Kleine-König
• [PATCH 05/11] ARM: imx: Add GPIO support for i.MX28   Uwe Kleine-König
• [PATCH 06/11] ARM: imx: Add IOMUX support for i.MX28   Uwe Kleine-König
• [PATCH 07/11] ARM: imx: Add support of uncompress print for i.MX28   Uwe Kleine-König
• [PATCH 10/11] ARM: imx: Add initial support of machine mx28evk   Uwe Kleine-König
• [PATCH 11/11] ARM: imx: Add i.MX28 support into Kconfig and Makefile   Uwe Kleine-König
• [PATCH] mx35_3ds: Add watchdog support   Uwe Kleine-König
• [RFC][PATCH 00/11] ARM: imx: Add initial i.MX28 support   Uwe Kleine-König
• [PATCH 1/5] mx51: Add PWM resources   Uwe Kleine-König
• [PATCH 3/5] mx51: Add mx51 processor to the pwm driver   Uwe Kleine-König
• [PATCH 7/7] ARM: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL   Uwe Kleine-König
• [RFC][PATCH 00/11] ARM: imx: Add initial i.MX28 support   Uwe Kleine-König
• [PATCH 03/11] ARM: imx: Add reset routine for i.MX28   Uwe Kleine-König
• [PATCH] ARM: imx: fix ehci-mxc build.   Uwe Kleine-König
• [PATCH 00/51] some more imx patches for 2.6.38   Uwe Kleine-König
• [PATCH 01/51] ARM: mx3: fix the last users of IMX_NEEDS_DEPRECATED_SYMBOLS   Uwe Kleine-König
• [PATCH 02/51] ARM: imx: refactor the io mapping macro   Uwe Kleine-König
• [PATCH 03/51] ARM: imx: use MXxy_IO_P2V macros to setup static mappings   Uwe Kleine-König
• [PATCH 04/51] ARM: imx: remove last explicit users of virtual base address defines   Uwe Kleine-König
• [PATCH 05/51] ARM: imx: change static io mapping to use a function   Uwe Kleine-König
• [PATCH 06/51] ARM: imx/debug-macro: rework using the new io mapping macro   Uwe Kleine-König
• [PATCH 07/51] ARM: imx: remove deprecated symbols as all users are gone now   Uwe Kleine-König
• [PATCH 08/51] ARM: imx: dynamically allocate mxc_w1 devices   Uwe Kleine-König
• [PATCH 09/51] ARM: imx: remove unused devices   Uwe Kleine-König
• [PATCH 10/51] ARM: imx: dynamically allocate imx_udc device   Uwe Kleine-König
• [PATCH 11/51] ARM: imx: allow specifying a dma mask when creating a platform device   Uwe Kleine-König
• [PATCH 12/51] ARM: imx: dynamically allocate mx1-camera device   Uwe Kleine-König
• [PATCH 13/51] ARM: imx/gpio: remove some useless casts   Uwe Kleine-König
• [PATCH 14/51] ARM: imx: dynamically allocate mx2-camera device   Uwe Kleine-König
• [PATCH 15/51] ARM: imx: dynamically allocate imx2-wdt devices   Uwe Kleine-König
• [PATCH 16/51] ARM: imx: change the way flexcan devices are registered   Uwe Kleine-König
• [PATCH 17/51] ARM: imx: dynamically register imx-fb devices   Uwe Kleine-König
• [PATCH 18/51] ARM: mx3: enable SPI_IMX for better compile coverage   Uwe Kleine-König
• [PATCH 19/51] ARM: imx: dynamically allocate mxc_pwm devices   Uwe Kleine-König
• [PATCH 20/51] ARM: mx3/mach-pcm037_eet: Fix section mismatch for eet_init_devices()   Uwe Kleine-König
• [PATCH 21/51] ARM: imx: dynamically register mxc-mmc devices   Uwe Kleine-König
• [PATCH 22/51] ARM: imx: dynamically allocate mxc-ehci devices   Uwe Kleine-König
• [PATCH 23/51] ARM: imx: dynamically allocate fsl-usb2-udc devices   Uwe Kleine-König
• [PATCH 24/51] ARM: imx: dynamically allocate imx-keypad devices   Uwe Kleine-König
• [PATCH 25/51] ARM: imx: dynamically allocate imx21-hcd devices   Uwe Kleine-König
• [PATCH 26/51] ARM: imx: remove now empty devices.h   Uwe Kleine-König
• [PATCH 27/51] ARM: imx: move registration of gpios to plat-mxc/gpio.c   Uwe Kleine-König
• [PATCH 28/51] ARM: mx25: dynamically allocate mxc-ehci devices   Uwe Kleine-König
• [PATCH 29/51] ARM: mx25: dynamically allocate fsl-usb2-udc devices   Uwe Kleine-König
• [PATCH 30/51] ARM: mx25: dynamically allocate mxc_pwm devices   Uwe Kleine-König
• [PATCH 31/51] ARM: mx25: move registration of gpios to plat-mxc/gpio.c   Uwe Kleine-König
• [PATCH 32/51] ARM: mx25: dynamically allocate imx-keypad devices   Uwe Kleine-König
• [PATCH 33/51] ARM: mx25: dynamically allocate imxdi_rtc devices   Uwe Kleine-König
• [PATCH 34/51] ARM: mx25: dynamically allocatate imx-fb devices   Uwe Kleine-König
• [PATCH 35/51] ARM: mx25: dynamically allocate imx2-wdt devices   Uwe Kleine-König
• [PATCH 36/51] ARM: mx25: dynamically allocate mx2-camera devices   Uwe Kleine-König
• [PATCH 37/51] ARM: mx25: remove now empty devices.h   Uwe Kleine-König
• [PATCH 38/51] ARM: imx: move mx25 support to mach-imx   Uwe Kleine-König
• [PATCH 39/51] ARM: imx: let IMX_HAVE_PLATFORM_IMX_FB select HAVE_FB_IMX   Uwe Kleine-König
• [PATCH 40/51] ARM: imx: let the machines select SOC_IMX{21,27}   Uwe Kleine-König
• [PATCH 41/51] ARM: imx: use SOC_IMX25 instead of ARCH_MX25 for multi-SoC   Uwe Kleine-König
• [PATCH 42/51] ARM: mx3: move registration of gpios to plat-mxc/gpio.c   Uwe Kleine-König
• [PATCH 43/51] ARM: mx3: use an MX35 constant in imx35 only code   Uwe Kleine-König
• [PATCH 44/51] ARM: mx3: introduce SOC_IMX31 and SOC_IMX35   Uwe Kleine-König
• [PATCH 45/51] ARM: mx3: dynamically register mxc-mmc devices   Uwe Kleine-König
• [PATCH 46/51] ARM: mx3: dynamically allocate mxc_rnga devices   Uwe Kleine-König
• [PATCH 47/51] ARM: mx3: dynamically allocate fsl-usb2-udc devices   Uwe Kleine-König
• [PATCH 48/51] ARM: mx3: dynamically allocate mxc-ehci devices   Uwe Kleine-König
• [PATCH 49/51] ARM: mx3: dynamically allocate imx2-wdt devices   Uwe Kleine-König
• [PATCH 50/51] ARM: mx3: dynamically allocate imx-keypad devices   Uwe Kleine-König
• [PATCH 51/51] ARM: mx3/mx35_3ds: Add watchdog support   Uwe Kleine-König
• [PATCH 00/51] some more imx patches for 2.6.38   Uwe Kleine-König
• [PATCH v2 46/51] ARM: mx3: dynamically allocate mxc_rnga devices   Uwe Kleine-König
• Calling conventions for IAR   Uwe Kleine-König
• [PATCH] ARM: add support for uncompressed uImage kernel   Uwe Kleine-König
• [PATCH] nomadik: prevent sched_clock() wraparound v4   Uwe Kleine-König
• [PATCH 00/51] some more imx patches for 2.6.38   Uwe Kleine-König
• [PATCH 3/5] mx51: Add mx51 processor to the pwm driver   Uwe Kleine-König
• [PATCH 1/2] ARM: mx5: introduce SOC_IMX51   Uwe Kleine-König
• [PATCH 35/51] ARM: mx25: dynamically allocate imx2-wdt devices   Uwe Kleine-König
• [PATCH 00/51] some more imx patches for 2.6.38   Uwe Kleine-König
• [PATCH 52/51] ARM: imx: fix name for functions adding sdhci-esdhc-imx devices   Uwe Kleine-König
• [PATCH 5/6] at91: rename rm9200ek and rm9200dk board file name   Uwe Kleine-König
• [PATCH 4/6] at91/picotux200: fix warning: 'picotux200_mmc_data' defined but not used   Uwe Kleine-König
• [PATCH 6/6] atmel_spi: fix warning In function 'atmel_spi_dma_map_xfer'   Uwe Kleine-König
• [PATCH] MXC IOMUX-V3 replace struct pad_desc with bitmapped cookie (step 2)   Uwe Kleine-König
• [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Uwe Kleine-König
• [PATCH] arm: GIC: Do not try to register more then NR_IRQS interrupts   Uwe Kleine-König
• [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Uwe Kleine-König
• About multi-line printk and the need (not) to repeat loglevel markers [Was: Re: [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera]   Uwe Kleine-König
• About multi-line printk and the need (not) to repeat loglevel markers [Was: Re: [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera]   Uwe Kleine-König
• [PATCH] ARM: io: Fix namespace conflicts.   Uwe Kleine-König
• [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Uwe Kleine-König
• [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Uwe Kleine-König
• About multi-line printk and the need (not) to repeat loglevel markers [Was: Re: [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera]   Uwe Kleine-König
• [PATCH 1/6] ARM: add some KERN_CONT markers to continuation lines   Uwe Kleine-König
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Uwe Kleine-König
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Uwe Kleine-König
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Uwe Kleine-König
• [PATCH 1/1] arm: imx: share imx5x_register_gpios for mach-mx5   Uwe Kleine-König
• [PATCH 1/1] arm: imx: share imx5x_register_gpios for mach-mx5   Uwe Kleine-König
• [PATCH 1/1] arm: imx: share imx5x_register_gpios for mach-mx5   Uwe Kleine-König
• [PATCH 1/1] arm: imx: share imx5x_register_gpios for mach-mx5   Uwe Kleine-König
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Uwe Kleine-König
• MX51: add FIQ support for TZIC   Uwe Kleine-König
• [PATCH 03/15] ARM: mxs: Add reset routines   Uwe Kleine-König
• [PATCH 01/15] ARM: mxs: Add core definitions   Uwe Kleine-König
• [PATCH 03/15] ARM: mxs: Add reset routines   Uwe Kleine-König
• [PATCH v2 1/2] ARM: mx5: introduce SOC_IMX51   Uwe Kleine-König
• [PATCH v2 2/2] ARM: mx5: dynamically allocate imx2-wdt devices   Uwe Kleine-König
• [PATCH 28/51] ARM: mx25: dynamically allocate mxc-ehci devices   Uwe Kleine-König
• [PATCH 28/51] ARM: mx25: dynamically allocate mxc-ehci devices   Uwe Kleine-König
• [PATCH] plat-mxc/ehci.c: fix compile breakage   Uwe Kleine-König
• [PATCH 28/51] ARM: mx25: dynamically allocate mxc-ehci devices   Uwe Kleine-König
• [PATCH] ARM: mx25: fix offset for usb host controller   Uwe Kleine-König
• [PATCH] prevent 'BUG: sleeping function called from invalid context' in arch_reset()   Uwe Kleine-König
• [PATCH 3/3] mtd: FSMC NAND fix obvious speling errors   Uwe Kleine-König
• [PATCH v2 01/15] ARM: mxs: Add core definitions   Uwe Kleine-König
• [PATCH v2 03/15] ARM: mxs: Add reset routines   Uwe Kleine-König
• [PATCH 04/15] ARM: mxs: Add interrupt support   Uwe Kleine-König
• [PATCH] make mc13783 code generic   Uwe Kleine-König
• [PATCH] make mc13783 code generic   Uwe Kleine-König
• [PATCH v2 1/2] ARM: mx5: dynamically allocate pwm devices   Uwe Kleine-König
• [PATCH] make mc13783 code generic   Uwe Kleine-König
• [PATCH 05/15] ARM: mxs: Add low-level debug UART support   Uwe Kleine-König
• [PATCH 06/15] ARM: mxs: Add timer support   Uwe Kleine-König
• [PATCH 07/15] ARM: mxs: Add gpio support   Uwe Kleine-König
• [PATCH 08/15] ARM: mxs: Add iomux support   Uwe Kleine-König
• [PATCH 09/15] ARM: mxs: Add clock support   Uwe Kleine-König
• [PATCH] ARM: mx5: fix keypad clock   Uwe Kleine-König
• [PATCH v2] ARM: mx5: fix keypad clock name   Uwe Kleine-König
• [PATCH v4 3/3] ARM: mx5: fix keypad clock name   Uwe Kleine-König
• [PATCH 12/15] ARM: mxs: Dynamically allocate fec devices   Uwe Kleine-König
• [PATCH 13/15] ARM: mxs: Add initial mx23evk support   Uwe Kleine-König
• [PATCH 14/15] ARM: mxs: Add initial mx28evk support   Uwe Kleine-König
• [PATCH 15/15] ARM: mxs: Add build configuration for mxs   Uwe Kleine-König
• [PATCH v3 1/2] msm: gpio: Add v2 gpio support to MSM SoCs.   Pavan Kondeti
• [PATCH v3 2/2] msm: gpio: Add irq support to v2 gpiolib.   Pavan Kondeti
• [PATCH][trivial] ARM, mm: Don't include smp_plat.h twice in flush.c   Jiri Kosina
• [PATCH TRIVIAL] AT91: usb: fix typo in atmel_usba_udc driver   Jiri Kosina
• [PATCH 0/6] OMAP cleanups   Aaro Koskinen
• [PATCH] arm: omap1: add missing includes   Aaro Koskinen
• [PATCH] arm: omap1: make some functions static   Aaro Koskinen
• [PATCH] arm: omap1: mbox: make variables static   Aaro Koskinen
• [PATCH] arm: omap1: mbox: delete unused variable   Aaro Koskinen
• [PATCH] arm: omap1: board-ams-delta: fix cast   Aaro Koskinen
• [PATCH] arm: omap2: timer-gp: delete unused variable   Aaro Koskinen
• [PATCH] arm: omap2: io: fix clk_get() error check   Aaro Koskinen
• [PATCH] ARM: Gemini: Add support for PCI Bus   Hans Ulli Kroll
• [PATCH] ARM: Gemini: Add support for PCI Bus   Hans Ulli Kroll
• [PATCH] ARM: Gemini: Add support for PCI BUS   Hans Ulli Kroll
• [PATCH] ARM: Gemini: Add support for PCI Bus   Hans Ulli Kroll
• [PATCH] ARM: Gemini: Add support for PCI BUS   Hans Ulli Kroll
• [PATCH] ARM: Gemini: Add support for PCI Bus   Hans Ulli Kroll
• [PATCH] ARM: Gemini: Add support for PCI BUS   Hans Ulli Kroll
• [PATCH 17/54] ARM: gemini: irq_data conversion.   Hans Ulli Kroll
• [PATCH] ARM: Gemini: Add support for PCI Bus   Hans Ulli Kroll
• [PATCH v2] OMAP1: drop AMS_DELTA_FIQ config option   Janusz Krzysztofik
• Machine name/id change request   Amit Kucheria
• [PATCH] ARM: SAMSUNG: Add support for clock debugging through debug-fs interface   Amit Kucheria
• [patch 1/1] iMX51: introduce MX51_GPIO_NR   Amit Kucheria
• [PATCH][ ARM cpu hotplug 2/2 ] Use common cpu hotplug code for UX500   Amit Kucheria
• [PATCH][ ARM cpu hotplug 1/2 ] extract common code for arm cpu hotplug   Amit Kucheria
• [PATCH] arm: dma: check clk_get() result   Vasiliy Kulikov
• [PATCH] arm: plat-omap: counter_32k: use IS_ERR() instead of NULL check   Vasiliy Kulikov
• [PATCH] arm: plat-spear: time: use IS_ERR() instead of NULL check   Vasiliy Kulikov
• [PATCHv3 1/1] omap: Ptr "isr_reg" tracked as NULL was dereferenced   Evgeny Kuznetsov
• [PATCH 00/10] MCDE: Add frame buffer device driver   Marcus LORENTZON
• [PATCH 00/10] MCDE: Add frame buffer device driver   Marcus LORENTZON
• [PATCH 09/10] MCDE: Add build files and bus   Marcus LORENTZON
• [PATCH 09/10] MCDE: Add build files and bus   Marcus LORENTZON
• S3C2416 clock tree   Sergey Lapin
• [Questions] How to run 'perf top' on ARM to profile kernel functions with modules loaded   Ming Lei
• [Questions] How to run 'perf top' on ARM to profile kernel functions with modules loaded   Ming Lei
• [Questions] How to run 'perf top' on ARM to profile kernel functions with modules loaded   Ming Lei
• [Questions] How to run 'perf top' on ARM to profile kernel functions with modules loaded   Ming Lei
• 'perf test' failed on ARM   Ming Lei
• [PATCH 1/3] ARM mx3fb: check for DMA engine type   Guennadi Liakhovetski
• [PATCH 1/3] ARM mx3_camera: check for DMA engine type   Guennadi Liakhovetski
• [PATCH 6/6 v4] ARM: Add support for the display controllers in VT8500 and WM8505   Guennadi Liakhovetski
• [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Guennadi Liakhovetski
• [PATCH] spi/pl022: fix erroneous platform data in U300   Grant Likely
• [PATCH v4 08/12] gpio: add ti-ssp gpio driver   Grant Likely
• [PATCH v4 08/12] gpio: add ti-ssp gpio driver   Grant Likely
• [PATCH 28/44] drivers/spi: Remove unnecessary semicolons   Grant Likely
• [PATCH v5 01/12] misc: add driver for sequencer serial port   Grant Likely
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   Grant Likely
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   Grant Likely
• [PATCH v5 01/12] misc: add driver for sequencer serial port   Grant Likely
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   Grant Likely
• [PATCH v5 01/12] misc: add driver for sequencer serial port   Grant Likely
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   Grant Likely
• [PATCH v6 08/12] gpio: add ti-ssp gpio driver   Grant Likely
• [PATCH 1/9] spi/pxa2xx: don't use subys initcall for driver init   Grant Likely
• [PATCH 1/9] spi/pxa2xx: don't use subys initcall for driver init   Grant Likely
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Grant Likely
• [PATCH] ptrace: make PTRACE_SINGLESTEP work with user helpers   Timo Juhani Lindfors
• [PATCH 2/2] arm: omap1: remove unused variables   Tony Lindgren
• [PATCH] OMAP2: Devkit8000: Fix mmc regulator failure   Tony Lindgren
• [PATCH v5 1/5] omap gpmc: enable irq mode in gpmc   Tony Lindgren
• [PATCH v5 0/3] OMAP2/3: DMA: FIFO drain errata fixes   Tony Lindgren
• [PATCH 1/2] arm: omap1: devices: need to return with a value   Tony Lindgren
• [PATCHv2 0/3] Various code improvements for IGEP v2 board.   Tony Lindgren
• [PATCH v4 01/13] OMAP: DMA: Replace read/write macros with functions   Tony Lindgren
• [PATCH 0/2] combine zoom board-files   Tony Lindgren
• [PATCH] ARM: Common GIC entry macro code V2   Tony Lindgren
• [PATCH 0/4] omap fixes for v2.6.37-rc1   Tony Lindgren
• [PATCH 1/4] OMAP2: Devkit8000: Fix mmc regulator failure   Tony Lindgren
• [PATCH 2/4] omap: dma: Add read-back to DMA interrupt handler to avoid spuriousinterrupts   Tony Lindgren
• [PATCH 3/4] OMAP1: camera.h: add missing include   Tony Lindgren
• [PATCH 4/4] arm: omap1: devices: need to return with a value   Tony Lindgren
• [PATCH 07/07] ARM: Use shared GIC entry macros on OMAP   Tony Lindgren
• [PATCH 2/4] omap: dma: Add read-back to DMA interrupt handler to avoid spuriousinterrupts   Tony Lindgren
• [GIT PULL] omap fixes for 2.6.37-rc1   Tony Lindgren
• [PATCH] omap4: enable L2 prefetching   Tony Lindgren
• [PATCH 2/3] OMAP: use generic DPI panel driver in board files   Tony Lindgren
• [PATCH v2] OMAP1: drop AMS_DELTA_FIQ config option   Tony Lindgren
• [Patch v5] OMAP: AM3517/05: Add craneboard support   Tony Lindgren
• [PATCHv3 1/1] omap: Ptr "isr_reg" tracked as NULL was dereferenced   Tony Lindgren
• [PATCH] OMAP: UART: don't resume UARTs that are not enabled.   Tony Lindgren
• [PATCH v7 11/11] OMAP: GPIO: Remove omap_gpio_init()   Tony Lindgren
• [PATCH 0/6] OMAP cleanups   Tony Lindgren
• OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled   Tony Lindgren
• [GIT PULL] omap serial console with PM fixes   Tony Lindgren
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Tony Lindgren
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Tony Lindgren
• [PATCH 2/2] ARM: imx: Add mx53 support to common msl functions.   Russell King - ARM Linux
• [PATCH] ARM amba: optional PrimeCell core voltage switch   Russell King - ARM Linux
• [PATCH 02/17] ARM: pxa: Access SMEMC via virtual addresses   Russell King - ARM Linux
• recent ARM Erratas 742231 & 742230 broken.   Russell King - ARM Linux
• CONFIG_FORCE_MAX_ZONEORDER settable for all ARM architectures   Russell King - ARM Linux
• CONFIG_FORCE_MAX_ZONEORDER settable for all ARM architectures   Russell King - ARM Linux
• [PATCH] ARM: add clean and flush_dcache_all to ARM cache API   Russell King - ARM Linux
• [RFC PATCH v3] ARM: Introduce patching of phys_to_virt and vice versa   Russell King - ARM Linux
• [PATCH 1/6 v2] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Russell King - ARM Linux
• [PATCH 1/6 v2] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Russell King - ARM Linux
• ARM stacktrace and SMP   Russell King - ARM Linux
• [PATCH] mmci: reset voltage after power off.   Russell King - ARM Linux
• [PATCH 1/6 v2] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Russell King - ARM Linux
• [patch v3 2/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM   Russell King - ARM Linux
• Machine name/id change request   Russell King - ARM Linux
• [RFC] Removal of dead code from arch/arm/*   Russell King - ARM Linux
• [PATCH] arch/arm/plat-mxc/cpufreq.c: Fix line continuation defect   Russell King - ARM Linux
• linux-next: omap2plus_defconfig not building   Russell King - ARM Linux
• linux-next: omap2plus_defconfig not building   Russell King - ARM Linux
• [RFC PATCH v3] ARM: Introduce patching of phys_to_virt and vice versa   Russell King - ARM Linux
• [PATCH 6/6 v3] ARM: Add support for the display controllers in VT8500 and WM8505   Russell King - ARM Linux
• Booting CNS3420 EVB v 1.3 failed with 2.6.36 (and 2.6.35)   Russell King - ARM Linux
• [PATCH 1/2] Fix the I-cache invalidation on ARMv6 and later CPUs   Russell King - ARM Linux
• [PATCH 1/2] Fix the I-cache invalidation on ARMv6 and later CPUs   Russell King - ARM Linux
• [PATCH 6/6 v3] ARM: Add support for the display controllers in VT8500 and WM8505   Russell King - ARM Linux
• [PATCH] ARM: Temporary fix for broken arch reboot   Russell King - ARM Linux
• [PATCH] ARM: add support for uncompressed uImage kernel   Russell King - ARM Linux
• [PATCH] pl011: added clock management feature   Russell King - ARM Linux
• [PATCH] pl011: added clock management feature   Russell King - ARM Linux
• [PATCH] ARM: Temporary fix for broken arch reboot   Russell King - ARM Linux
• [PATCH] [ARM] dove: add support for CM-A510 machine.   Russell King - ARM Linux
• [PATCH] [ARM] dove: add support for CM-A510 machine.   Russell King - ARM Linux
• Size of dma_alloc_writecombine.   Russell King - ARM Linux
• [PATCH 1/6 v4] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Russell King - ARM Linux
• [PATCH] ARM: Temporary fix for broken arch reboot   Russell King - ARM Linux
• [RFC PATCH v3] ARM: Introduce patching of phys_to_virt and vice versa   Russell King - ARM Linux
• [PATCH] pl011: added clock management feature   Russell King - ARM Linux
• [RFC PATCH v3] ARM: Introduce patching of phys_to_virt and vice versa   Russell King - ARM Linux
• [RFC PATCH v3] ARM: Introduce patching of phys_to_virt and vice versa   Russell King - ARM Linux
• [PATCH] [ARM] dove: add support for CM-A510 machine.   Russell King - ARM Linux
• arm smp support patch   Russell King - ARM Linux
• arm smp support patch   Russell King - ARM Linux
• arm smp support patch   Russell King - ARM Linux
• arm smp support patch   Russell King - ARM Linux
• [PATCH 1/6 v5] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Russell King - ARM Linux
• ARM: fix compile warning in mm/init.c   Russell King - ARM Linux
• ARM: fix compile warning in mm/init.c   Russell King - ARM Linux
• [PATCH] [ARM] twd: Allow twd rescaling to match cpu frequency   Russell King - ARM Linux
• Booting CNS3420 EVB v 1.3 failed with 2.6.36 (and 2.6.35)   Russell King - ARM Linux
• [PATCH 02/10] MCDE: Add configuration registers   Russell King - ARM Linux
• [PATCH] arch/arm/kernel/smp_twd.c: Correct local timer printk decimal output   Russell King - ARM Linux
• [PATCH] ARM: Stop irqsoff tracing if return to user with interrupts enabled   Russell King - ARM Linux
• [PATCH] ARM: Stop irqsoff tracing if return to user with interrupts enabled   Russell King - ARM Linux
• [PATCH 4/4] ARM: memblock: convert reserve_crashkernel() to use memblock   Russell King - ARM Linux
• [PATCH 2.6.36 1/1] kernel SPIN_LOCK_UNLOCKED changed to __SPIN_LOCK_UNLOCKED()   Russell King - ARM Linux
• [PATCH v2 03/20] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Russell King - ARM Linux
• [PATCH v2 03/20] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Russell King - ARM Linux
• [PATCH 2.6.36 1/1 RESEND] kernel SPIN_LOCK_UNLOCKED changed to __SPIN_LOCK_UNLOCKED()   Russell King - ARM Linux
• [PATCH 1/1] ARM: cns3xxx: Fixup the missing second parameter to addruart macro to allow them to build.   Russell King - ARM Linux
• [PATCH 2.6.36 1/1 RESEND] kernel SPIN_LOCK_UNLOCKED changed to __SPIN_LOCK_UNLOCKED()   Russell King - ARM Linux
• [PATCH 02/10] MCDE: Add configuration registers   Russell King - ARM Linux
• [PATCH] ARM: Temporary fix for broken arch reboot   Russell King - ARM Linux
• [PATCH v2 03/20] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Russell King - ARM Linux
• [PATCH v2 04/20] ARM: LPAE: Do not assume Linux PTEs are always at PTRS_PER_PTE offset   Russell King - ARM Linux
• [PATCH 0/9] Clean up SMP IPI support   Russell King - ARM Linux
• [PATCH 1/9] ARM: remove obsolete smp_cross_call_done()   Russell King - ARM Linux
• [PATCH 2/9] ARM: smp: pass an ipi number to smp_cross_call()   Russell King - ARM Linux
• [PATCH 3/9] ARM: smp: avoid using bitmasks and locks for IPIs, use hardware instead   Russell King - ARM Linux
• [PATCH 4/9] ARM: include local timer irq stats only when local timers configured   Russell King - ARM Linux
• [PATCH 5/9] ARM: smp: provide accessors for irq_stat data   Russell King - ARM Linux
• [PATCH 6/9] ARM: smp: move ipi_count into irq_stat structure   Russell King - ARM Linux
• [PATCH 7/9] ARM: fix /proc/interrupts formatting   Russell King - ARM Linux
• [PATCH 8/9] ARM: smp: provide individual IPI interrupt statistics   Russell King - ARM Linux
• [PATCH 9/9] ARM: smp: collect IPI and local timer IRQs for /proc/stat   Russell King - ARM Linux
• [PATCH v2 05/20] ARM: LPAE: Introduce L_PTE_NOEXEC and L_PTE_NOWRITE   Russell King - ARM Linux
• [PATCH v2 06/20] ARM: LPAE: Introduce the 3-level page table format definitions   Russell King - ARM Linux
• [PATCH] mx35_3ds: Add watchdog support   Russell King - ARM Linux
• [PATCH v2 02/20] ARM: LPAE: Factor out 2-level page table definitions into separate files   Russell King - ARM Linux
• [PATCH v2 03/20] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Russell King - ARM Linux
• [PATCH v2 02/20] ARM: LPAE: Factor out 2-level page table definitions into separate files   Russell King - ARM Linux
• [PATCH v2 02/20] ARM: LPAE: Factor out 2-level page table definitions into separate files   Russell King - ARM Linux
• [PATCH v2 05/20] ARM: LPAE: Introduce L_PTE_NOEXEC and L_PTE_NOWRITE   Russell King - ARM Linux
• [PATCH 4/7] ARM: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in kernel/head.S   Russell King - ARM Linux
• [PATCH 7/7] ARM: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL   Russell King - ARM Linux
• [PATCH v3 15/20] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Russell King - ARM Linux
• [PATCH 7/7] ARM: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL   Russell King - ARM Linux
• [PATCH v5 01/12] misc: add driver for sequencer serial port   Russell King - ARM Linux
• [PATCH] nomadik: prevent sched_clock() wraparound   Russell King - ARM Linux
• [PATCH 1/4] proc/vmcore: allow archs to override vmcore_elf_check_arch()   Russell King - ARM Linux
• [PATCH] nomadik: prevent sched_clock() wraparound   Russell King - ARM Linux
• Devel error: redefinition of 'struct flash_platform_data'   Russell King - ARM Linux
• [PATCH v2 05/20] ARM: LPAE: Introduce L_PTE_NOEXEC and L_PTE_NOWRITE   Russell King - ARM Linux
• [PATCH 3/9] ARM: smp: avoid using bitmasks and locks for IPIs, use hardware instead   Russell King - ARM Linux
• [PATCH 0/9] Clean up SMP IPI support   Russell King - ARM Linux
• [PATCH v2 05/20] ARM: LPAE: Introduce L_PTE_NOEXEC and L_PTE_NOWRITE   Russell King - ARM Linux
• [PATCH 0/5] Clean up page tables   Russell King - ARM Linux
• [PATCH 1/5] ARM: pgtable: switch order of Linux vs hardware page tables   Russell King - ARM Linux
• [PATCH 2/5] ARM: pgtable: directly pass pgd/pmd/pte to their error functions   Russell King - ARM Linux
• [PATCH 3/5] ARM: pgtable: introduce pteval_t to represent a pte value   Russell King - ARM Linux
• [PATCH 4/5] ARM: pgtable: invert L_PTE_EXEC to L_PTE_XN   Russell King - ARM Linux
• [PATCH 5/5] ARM: pgtable: provide RDONLY page table bit rather than WRITE bit   Russell King - ARM Linux
• [PATCH v2 05/20] ARM: LPAE: Introduce L_PTE_NOEXEC and L_PTE_NOWRITE   Russell King - ARM Linux
• [PATCH] ARM: add support for uncompressed uImage kernel   Russell King - ARM Linux
• Calling conventions for IAR   Russell King - ARM Linux
• [PATCH] ARM: l2x0: Check the correct address range   Russell King - ARM Linux
• Weirdo gcc 4.3.x behaviour   Russell King - ARM Linux
• [PATCH] Add call to non-crashing cores through IPI   Russell King - ARM Linux
• [PATCH] Add call to non-crashing cores through IPI   Russell King - ARM Linux
• [PATCH v2 01/20] ARM: LPAE: Use PMD_(SHIFT|SIZE|MASK) instead of PGDIR_*   Russell King - ARM Linux
• [PATCH v2 07/20] ARM: LPAE: Page table maintenance for the 3-level format   Russell King - ARM Linux
• [PATCH v2 08/20] ARM: LPAE: MMU setup for the 3-level page table format   Russell King - ARM Linux
• [PATCH v2 09/20] ARM: LPAE: Change setup_mm_for_reboot() to work with LPAE   Russell King - ARM Linux
• [PATCH v2 10/20] ARM: LPAE: Remove the FIRST_USER_PGD_NR and USER_PTRS_PER_PGD definitions   Russell King - ARM Linux
• [PATCH v2 11/20] ARM: LPAE: Add fault handling support   Russell King - ARM Linux
• [PATCH v2 01/20] ARM: LPAE: Use PMD_(SHIFT|SIZE|MASK) instead of PGDIR_*   Russell King - ARM Linux
• [PATCH v2 11/20] ARM: LPAE: Add fault handling support   Russell King - ARM Linux
• [PATCH v2 13/20] ARM: LPAE: Add SMP support for the 3-level page table format   Russell King - ARM Linux
• [PATCH v2 19/20] ARM: LPAE: define printk format for physical addresses and page table entries   Russell King - ARM Linux
• [PATCH] Add call to non-crashing cores through IPI   Russell King - ARM Linux
• [PATCH] Add call to non-crashing cores through IPI   Russell King - ARM Linux
• [PATCH 3/3] S5PV210: added MIPI-DSI driver.   Russell King - ARM Linux
• [PATCH v2 8/9] ARM: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2.   Russell King - ARM Linux
• [PATCH v2 8/9] ARM: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2.   Russell King - ARM Linux
• [PATCH v2 8/9] ARM: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2.   Russell King - ARM Linux
• [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Russell King - ARM Linux
• [PATCH v2 08/20] ARM: LPAE: MMU setup for the 3-level page table format   Russell King - ARM Linux
• [PATCH] ARM: io: Fix namespace conflicts.   Russell King - ARM Linux
• [PATCH v2] arm: GIC: Do not try to register more then NR_IRQS interrupts   Russell King - ARM Linux
• [PATCH v2] arm: GIC: Do not try to register more then NR_IRQS interrupts   Russell King - ARM Linux
• About multi-line printk and the need (not) to repeat loglevel markers [Was: Re: [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera]   Russell King - ARM Linux
• [PATCH] ARM: V6 MPCore v6_dma_inv_range RWFO fix   Russell King - ARM Linux
• [PATCH] ARM: V6 MPCore v6_dma_inv_range RWFO fix   Russell King - ARM Linux
• [PATCH] ARM: V6 MPCore v6_dma_inv_range RWFO fix   Russell King - ARM Linux
• [PATCH] ARM: Fix find_next_zero_bit and related assembly   Russell King - ARM Linux
• linux-next: omap2plus_defconfig not building   Russell King - ARM Linux
• [PATCH 1/9] spi/pxa2xx: don't use subys initcall for driver init   Russell King - ARM Linux
• [PATCH 2/7] arm/pxa2xx: reorganize I2C files   Russell King - ARM Linux
• [PATCH 1/9] spi/pxa2xx: don't use subys initcall for driver init   Russell King - ARM Linux
• [Question] Local Timer based on SPI   Russell King - ARM Linux
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Russell King - ARM Linux
• [GIT PULL] ARM: perf: split by architecture   Russell King - ARM Linux
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Russell King - ARM Linux
• [PATCH 1/4] proc/vmcore: allow archs to override vmcore_elf_check_arch()   Russell King - ARM Linux
• [sodaville] [PATCH 1/9] spi/pxa2xx: don't use subys initcall for driver init   Russell King - ARM Linux
• [PATCH] ARM: Gemini: Add support for PCI Bus   Russell King - ARM Linux
• [PATCH 1/5] ARM: pgtable: switch order of Linux vs hardware page tables   Russell King - ARM Linux
• linux-next: omap2plus_defconfig not building   Russell King - ARM Linux
• linux-next: omap2plus_defconfig not building   Russell King - ARM Linux
• linux-next: omap2plus_defconfig not building   Russell King - ARM Linux
• linux-next: omap2plus_defconfig not building   Russell King - ARM Linux
• linux-next: omap2plus_defconfig not building   Russell King - ARM Linux
• [PATCH v2 1/4] drivers: hwspinlock: add generic framework   Russell King - ARM Linux
• [PATCH 0/4] ARM: hw_breakpoint: fixes and improvements   Russell King - ARM Linux
• memory allocation errors on Marvell Kirkwood   Russell King - ARM Linux
• [PATCH][ ARM cpu hotplug 1/2 ] extract common code for arm cpu hotplug   Russell King - ARM Linux
• [Question] Local Timer based on SPI   Russell King - ARM Linux
• [PATCH] ARM: Gemini: Add support for PCI Bus   Russell King - ARM Linux
• [PATCH][ ARM cpu hotplug 1/2 ] extract common code for arm cpu hotplug   Russell King - ARM Linux
• [PATCH] ARM: Gemini: Add support for PCI BUS   Russell King - ARM Linux
• [GIT PULL] Kconfig changes for MSM to enable SMP   Russell King - ARM Linux
• [PATCH][ ARM cpu hotplug 1/2 ] extract common code for arm cpu hotplug   Russell King - ARM Linux
• [PATCH][ ARM cpu hotplug 1/2 ] extract common code for arm cpu hotplug   Russell King - ARM Linux
• ARM perf events spin locks   Russell King - ARM Linux
• [PATCH] ARM: Gemini: Add support for PCI Bus   Russell King - ARM Linux
• [PATCH][ ARM cpu hotplug 1/2 ] extract common code for arm cpu hotplug   Russell King - ARM Linux
• [PATCH 04/15] ARM: mxs: Add interrupt support   Russell King - ARM Linux
• [PATCH v2] [ARM] gic: Unmask private interrupts on all cores during IRQ enable   Russell King - ARM Linux
• [PATCH 2/8] ARM: cns3xxx: Add support for SMP   Russell King - ARM Linux
• [PATCH 09/10] MCDE: Add build files and bus   Russell King - ARM Linux
• [PATCH 09/10] MCDE: Add build files and bus   Russell King - ARM Linux
• [PATCH] ARM: TWD: Consolidate local timers support   Russell King - ARM Linux
• [PATCH 1/8] ARM: SCU: Add common routines for secondary CPU bootup   Russell King - ARM Linux
• [PATCH 3/8] ARM: VExpress: Switch to generic SCU routines   Russell King - ARM Linux
• [PATCH 1/8] ARM: SCU: Add common routines for secondary CPU bootup   Russell King - ARM Linux
• [PATCH 09/10] MCDE: Add build files and bus   Russell King - ARM Linux
• [PATCH 1/8] ARM: SCU: Add common routines for secondary CPU bootup   Russell King - ARM Linux
• [PATCH v2 0/4] tidspbridge: SCM layer violation fixes   Omar Ramirez Luna
• [PATCH v2 0/7] omap: mailbox: hwmod support and dependent cleanup patches   Omar Ramirez Luna
• [PATCH v2 1/7] OMAP2: hwmod data: add mailbox data   Omar Ramirez Luna
• [PATCH v2 2/7] OMAP3: hwmod data: add mailbox data   Omar Ramirez Luna
• [PATCH v2 3/7] OMAP4: hwmod data: add mailbox data   Omar Ramirez Luna
• [PATCH v2 4/7] omap: mailbox: initial hwmod support   Omar Ramirez Luna
• [PATCH v2 5/7] omap: mailbox: add omap_device latency information   Omar Ramirez Luna
• [PATCH v2 6/7] omap: mailbox: fix detection for previously supported chips   Omar Ramirez Luna
• [PATCH v2 7/7] omap: mailbox: remove unreachable return   Omar Ramirez Luna
• [PATCH 0/6] omap: iommu: hwmod support and code reorganization   Omar Ramirez Luna
• [PATCH 1/6] omap: iommu: remove redundant clock usage   Omar Ramirez Luna
• [PATCH 2/6] OMAP3: hwmod data: Add mmu for iva2 and isp   Omar Ramirez Luna
• [PATCH 3/6] OMAP4: hwmod data: add mmu hwmod for ducati and tesla   Omar Ramirez Luna
• [PATCH 4/6] omap: iommu: intial hwmod support   Omar Ramirez Luna
• [PATCH 5/6] omap: iommu: hwmod device enable/disable routines   Omar Ramirez Luna
• [PATCH 6/6] omap: iommu: code reorganization and cleanup   Omar Ramirez Luna
• [PATCH 00/02] staging: tidspbridge: 2.6.37-rcX fixes   Omar Ramirez Luna
• [PATCH 01/02] omap: dsp: remove shm from normal memory   Omar Ramirez Luna
• [PATCH 02/02] staging: tidspbridge: hardcode SCM macros while fix is upstreamed   Omar Ramirez Luna
• [PATCH] OMAP: ZOOM2: Change GPIO to enable LCD NEC NL8048HL11-01B on OMAP34x-II MDP   Omar Ramirez Luna
• Booting CNS3420 EVB v 1.3 failed with 2.6.36 (and 2.6.35)   Lin Mac
• Booting CNS3420 EVB v 1.3 failed with 2.6.36 (and 2.6.35)   Lin Mac
• Booting CNS3420 EVB v 1.3 failed with 2.6.36 (and 2.6.35)   Lin Mac
• Booting CNS3420 EVB v 1.3 failed with 2.6.36 (and 2.6.35)   Lin Mac
• Booting CNS3420 EVB v 1.3 failed with 2.6.36 (and 2.6.35)   Lin Mac
• Booting CNS3420 EVB v 1.3 failed with 2.6.36 (and 2.6.35)   Lin Mac
• Booting CNS3420 EVB v 1.3 failed with 2.6.36 (and 2.6.35)   Lin Mac
• [PATCH 1/1] ARM: cns3xxx: Fixup the missing second parameter to addruart macro to allow them to build.   Lin Mac
• [PATCH v2 2/3] ARM: cns3xxx: Add architecture definition for EHCI/OHCI controller   Lin Mac
• [PATCH v2 2/3] ARM: cns3xxx: Add architecture definition for EHCI/OHCI controller   Lin Mac
• [PATCH v3 1/1] USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs   Lin Mac
• [PATCH v3 1/1] USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs   Lin Mac
• Cannot detect SATA disks w/ CONFIG_SATA_PMP w/o actually using SATA multiplier   Lin Mac
• Cannot detect SATA disks w/ CONFIG_SATA_PMP w/o actually using SATA multiplier   Lin Mac
• [PATCH] [OMAP] HTCHERALD: MMC, I2C, HTCPLD, SPI, TSC2046   Cory Maccarrone
• PXA270 Random Hangs at Low Core Freq   Pavel Machek
• 19851c58e68 breaks spacecom1 board   Pavel Machek
• suspicious code in linux/arch/arm/common/sa1111.c   Pavel Machek
• [PATCH] Documentation about RS485 serial communications   Pavel Machek
• 19851c58e68 breaks spacecom1 board   Pavel Machek
• [PATCH] Documentation about RS485 serial communications   Pavel Machek
• PXA3xx 2D graphics accelerator   Daniel Mack
• [PATCH 1/2] video: add driver for PXA3xx 2D graphics accelerator   Daniel Mack
• [PATCH 2/2] ARM: pxa/raumfeld: enable PXA3XX_GCU driver   Daniel Mack
• CONFIG_FORCE_MAX_ZONEORDER settable for all ARM architectures   Daniel Mack
• CONFIG_FORCE_MAX_ZONEORDER settable for all ARM architectures   Daniel Mack
• [AT91SAM9260] kernel hang in at91sam926x_pit_reset()   Vitja Makarov
• [AT91SAM9260] kernel hang in at91sam926x_pit_reset()   Vitja Makarov
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   Ryan Mallon
• [PATCH v5 08/12] gpio: add ti-ssp gpio driver   Ryan Mallon
• [PATCH v6 08/12] gpio: add ti-ssp gpio driver   Ryan Mallon
• [PATCH v6 08/12] gpio: add ti-ssp gpio driver   Ryan Mallon
• [PATCH 15/54] ARM: ep93xx: irq_data conversion.   Ryan Mallon
• [PATCH 15/54] ARM: ep93xx: irq_data conversion.   Ryan Mallon
• [PATCH 6/6] ARM: ftrace: enable function graph tracer   Catalin Marinas
• linux-next: omap2plus_defconfig not building   Catalin Marinas
• linux-next: omap2plus_defconfig not building   Catalin Marinas
• linux-next: omap2plus_defconfig not building   Catalin Marinas
• [PATCH 6/6] ARM: ftrace: enable function graph tracer   Catalin Marinas
• Using non-Global mappings for kernel address space   Catalin Marinas
• Cache clean of page table entries   Catalin Marinas
• Using non-Global mappings for kernel address space   Catalin Marinas
• [PATCH 1/2] Fix the I-cache invalidation on ARMv6 and later CPUs   Catalin Marinas
• [PATCH 6/6] ARM: ftrace: enable function graph tracer   Catalin Marinas
• [PATCH] ARM: Temporary fix for broken arch reboot   Catalin Marinas
• Using non-Global mappings for kernel address space   Catalin Marinas
• Cache clean of page table entries   Catalin Marinas
• [PATCH] ARM: Temporary fix for broken arch reboot   Catalin Marinas
• [PATCH v2 00/20] ARM: Add support for the Large Physical Address Extensions   Catalin Marinas
• [PATCH v2 01/20] ARM: LPAE: Use PMD_(SHIFT|SIZE|MASK) instead of PGDIR_*   Catalin Marinas
• [PATCH v2 02/20] ARM: LPAE: Factor out 2-level page table definitions into separate files   Catalin Marinas
• [PATCH v2 03/20] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Catalin Marinas
• [PATCH v2 04/20] ARM: LPAE: Do not assume Linux PTEs are always at PTRS_PER_PTE offset   Catalin Marinas
• [PATCH v2 05/20] ARM: LPAE: Introduce L_PTE_NOEXEC and L_PTE_NOWRITE   Catalin Marinas
• [PATCH v2 06/20] ARM: LPAE: Introduce the 3-level page table format definitions   Catalin Marinas
• [PATCH v2 07/20] ARM: LPAE: Page table maintenance for the 3-level format   Catalin Marinas
• [PATCH v2 08/20] ARM: LPAE: MMU setup for the 3-level page table format   Catalin Marinas
• [PATCH v2 09/20] ARM: LPAE: Change setup_mm_for_reboot() to work with LPAE   Catalin Marinas
• [PATCH v2 10/20] ARM: LPAE: Remove the FIRST_USER_PGD_NR and USER_PTRS_PER_PGD definitions   Catalin Marinas
• [PATCH v2 11/20] ARM: LPAE: Add fault handling support   Catalin Marinas
• [PATCH v2 12/20] ARM: LPAE: Add context switching support   Catalin Marinas
• [PATCH v2 13/20] ARM: LPAE: Add SMP support for the 3-level page table format   Catalin Marinas
• [PATCH v2 14/20] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Catalin Marinas
• [PATCH v2 15/20] ARM: LPAE: Use generic dma_addr_t type definition   Catalin Marinas
• [PATCH v2 16/20] ARM: LPAE: mark memory banks with start > ULONG_MAX as highmem   Catalin Marinas
• [PATCH v2 17/20] ARM: LPAE: use phys_addr_t for physical start address in early_mem   Catalin Marinas
• [PATCH v2 18/20] ARM: LPAE: add support for ATAG_MEM64   Catalin Marinas
• [PATCH v2 19/20] ARM: LPAE: define printk format for physical addresses and page table entries   Catalin Marinas
• [PATCH v2 20/20] ARM: LPAE: Add the Kconfig entries   Catalin Marinas
• [PATCH v2 20/20] ARM: LPAE: Add the Kconfig entries   Catalin Marinas
• [PATCH v2 08/20] ARM: LPAE: MMU setup for the 3-level page table format   Catalin Marinas
• [PATCH v2 03/20] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Catalin Marinas
• [PATCH v2 03/20] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Catalin Marinas
• [PATCH v2 03/20] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Catalin Marinas
• [PATCH v2 03/20] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Catalin Marinas
• [PATCH v2] [ARM] Dove: add support for CM-A510 machine.   Catalin Marinas
• [PATCH v2 03/20] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Catalin Marinas
• [PATCH v3 00/20] ARM: Add support for the Large Physical Address Extensions   Catalin Marinas
• [PATCH v3 01/20] ARM: LPAE: Use PMD_(SHIFT|SIZE|MASK) instead of PGDIR_*   Catalin Marinas
• [PATCH v3 02/20] ARM: LPAE: Factor out 2-level page table definitions into separate files   Catalin Marinas
• [PATCH v3 03/20] ARM: LPAE: use long long format when printing physical addresses and ptes   Catalin Marinas
• [PATCH v3 04/20] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Catalin Marinas
• [PATCH v3 05/20] ARM: LPAE: Do not assume Linux PTEs are always at PTRS_PER_PTE offset   Catalin Marinas
• [PATCH v3 06/20] ARM: LPAE: Introduce L_PTE_NOEXEC and L_PTE_NOWRITE   Catalin Marinas
• [PATCH v3 07/20] ARM: LPAE: Introduce the 3-level page table format definitions   Catalin Marinas
• [PATCH v3 08/20] ARM: LPAE: Page table maintenance for the 3-level format   Catalin Marinas
• [PATCH v3 09/20] ARM: LPAE: MMU setup for the 3-level page table format   Catalin Marinas
• [PATCH v3 10/20] ARM: LPAE: Change setup_mm_for_reboot() to work with LPAE   Catalin Marinas
• [PATCH v3 11/20] ARM: LPAE: Remove the FIRST_USER_PGD_NR and USER_PTRS_PER_PGD definitions   Catalin Marinas
• [PATCH v3 12/20] ARM: LPAE: Add fault handling support   Catalin Marinas
• [PATCH v3 13/20] ARM: LPAE: Add context switching support   Catalin Marinas
• [PATCH v3 14/20] ARM: LPAE: Add SMP support for the 3-level page table format   Catalin Marinas
• [PATCH v3 15/20] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Catalin Marinas
• [PATCH v3 16/20] ARM: LPAE: Use generic dma_addr_t type definition   Catalin Marinas
• [PATCH v3 17/20] ARM: LPAE: mark memory banks with start > ULONG_MAX as highmem   Catalin Marinas
• [PATCH v3 18/20] ARM: LPAE: use phys_addr_t for physical start address in early_mem   Catalin Marinas
• [PATCH v3 19/20] ARM: LPAE: add support for ATAG_MEM64   Catalin Marinas
• [PATCH v3 20/20] ARM: LPAE: Add the Kconfig entries   Catalin Marinas
• [PATCH v2 04/20] ARM: LPAE: Do not assume Linux PTEs are always at PTRS_PER_PTE offset   Catalin Marinas
• [PATCH v2 02/20] ARM: LPAE: Factor out 2-level page table definitions into separate files   Catalin Marinas
• [PATCH v2 03/20] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Catalin Marinas
• [PATCH v2 06/20] ARM: LPAE: Introduce the 3-level page table format definitions   Catalin Marinas
• [PATCH v2 02/20] ARM: LPAE: Factor out 2-level page table definitions into separate files   Catalin Marinas
• [PATCH v2 05/20] ARM: LPAE: Introduce L_PTE_NOEXEC and L_PTE_NOWRITE   Catalin Marinas
• [PATCH v2 02/20] ARM: LPAE: Factor out 2-level page table definitions into separate files   Catalin Marinas
• [PATCH v2 05/20] ARM: LPAE: Introduce L_PTE_NOEXEC and L_PTE_NOWRITE   Catalin Marinas
• [PATCH v2 05/20] ARM: LPAE: Introduce L_PTE_NOEXEC and L_PTE_NOWRITE   Catalin Marinas
• [PATCH v2 03/20] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Catalin Marinas
• [PATCH] ARM: S5PV310: Set bit 22 in the PL310 (cache controller) AuxCtlr register   Catalin Marinas
• [PATCH 4/7] ARM: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in kernel/head.S   Catalin Marinas
• [PATCH 7/7] ARM: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL   Catalin Marinas
• [PATCH v3 15/20] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Catalin Marinas
• [PATCH 2/9] ARM: smp: pass an ipi number to smp_cross_call()   Catalin Marinas
• [PATCH 2/2] ARM: kexec: Fix crash_setup_regs() for ARMv7 and CONFIG_THUMB2_KERNEL   Catalin Marinas
• [PATCH 2/2] ARM: kexec: Fix crash_setup_regs() for ARMv7 and CONFIG_THUMB2_KERNEL   Catalin Marinas
• [PATCH] ARM: Set bit 22 in the PL310 (cache controller) AuxCtlr register   Catalin Marinas
• [PATCH v3 15/20] ARM: LPAE: use phys_addr_t instead of unsigned long for physical addresses   Catalin Marinas
• [PATCH v2 05/20] ARM: LPAE: Introduce L_PTE_NOEXEC and L_PTE_NOWRITE   Catalin Marinas
• [PATCH 3/9] ARM: smp: avoid using bitmasks and locks for IPIs, use hardware instead   Catalin Marinas
• [PATCH 0/9] Clean up SMP IPI support   Catalin Marinas
• [PATCH 0/9] Clean up SMP IPI support   Catalin Marinas
• [PATCH v2 05/20] ARM: LPAE: Introduce L_PTE_NOEXEC and L_PTE_NOWRITE   Catalin Marinas
• [PATCH 3/9] ARM: smp: avoid using bitmasks and locks for IPIs, use hardware instead   Catalin Marinas
• [PATCH v2 05/20] ARM: LPAE: Introduce L_PTE_NOEXEC and L_PTE_NOWRITE   Catalin Marinas
• [PATCH v2 05/20] ARM: LPAE: Introduce L_PTE_NOEXEC and L_PTE_NOWRITE   Catalin Marinas
• [PATCH 3/5] ARM: pgtable: introduce pteval_t to represent a pte value   Catalin Marinas
• [PATCH] ARM: Make the argument to virt_to_phys() "const volatile"   Catalin Marinas
• [PATCH 1/2] ARM: Use CTR instead of CCSIDR for the D-cache line size on ARMv7   Catalin Marinas
• [PATCH 2/2] ARM: Use CTR for the I-cache line size on ARMv7   Catalin Marinas
• [PATCH 1/5] ARM: pgtable: switch order of Linux vs hardware page tables   Catalin Marinas
• [PATCH 1/5] ARM: pgtable: switch order of Linux vs hardware page tables   Catalin Marinas
• [PATCH 1/5] ARM: pgtable: switch order of Linux vs hardware page tables   Catalin Marinas
• [PATCH] ARM: l2x0: Check the correct address range   Catalin Marinas
• [PATCH 1/5] ARM: pgtable: switch order of Linux vs hardware page tables   Catalin Marinas
• [PATCH 0/5] Clean up page tables   Catalin Marinas
• [PATCH 3/5] ARM: pgtable: introduce pteval_t to represent a pte value   Catalin Marinas
• [PATCH 3/5] ARM: pgtable: introduce pteval_t to represent a pte value   Catalin Marinas
• [PATCH] arm: Fix GIC distributor initialisation   Catalin Marinas
• [PATCH] arm: Fix GIC distributor initialisation   Catalin Marinas
• [PATCH 1/5] ARM: l2x0: Add aux control register bitfields   Catalin Marinas
• [PATCH] ARM: Fix spinlock bad magic on disabling nonboot cpu   Catalin Marinas
• [PATCH v2 01/20] ARM: LPAE: Use PMD_(SHIFT|SIZE|MASK) instead of PGDIR_*   Catalin Marinas
• [PATCH v2 11/20] ARM: LPAE: Add fault handling support   Catalin Marinas
• [PATCH v2 11/20] ARM: LPAE: Add fault handling support   Catalin Marinas
• [PATCH] arm: GIC: Do not try to register more then NR_IRQS interrupts   Catalin Marinas
• [PATCH v2 19/20] ARM: LPAE: define printk format for physical addresses and page table entries   Catalin Marinas
• [PATCH] Add call to non-crashing cores through IPI   Catalin Marinas
• [PATCH] Add call to non-crashing cores through IPI   Catalin Marinas
• [PATCH v2 08/20] ARM: LPAE: MMU setup for the 3-level page table format   Catalin Marinas
• [PATCH] Add call to non-crashing cores through IPI   Catalin Marinas
• [PATCH] ARM: Allow SMP_ON_UP to work with Thumb-2 kernels.   Catalin Marinas
• [PATCH] Add call to non-crashing cores through IPI   Catalin Marinas
• [PATCH v2 08/20] ARM: LPAE: MMU setup for the 3-level page table format   Catalin Marinas
• [PATCH] ARM: V6 MPCore v6_dma_inv_range RWFO fix   Catalin Marinas
• [PATCH] ARM: V6 MPCore v6_dma_inv_range RWFO fix   Catalin Marinas
• [PATCH] ARM: V6 MPCore v6_dma_inv_range RWFO fix   Catalin Marinas
• [PATCH v3] arm: GIC: Do not try to register more then NR_IRQS interrupts   Catalin Marinas
• [PATCH] ARM: V6 MPCore v6_dma_inv_range RWFO fix   Catalin Marinas
• [PATCH] ARM: V6 MPCore v6_dma_inv_range RWFO fix   Catalin Marinas
• linux-next: omap2plus_defconfig not building   Catalin Marinas
• [PATCH 1/5] ARM: pgtable: switch order of Linux vs hardware page tables   Catalin Marinas
• [PATCH] usb: host: tegra: protect bus suspend with CONFIG_PM   Allen Martin
• [PATCH] ARM: tegra: irq: protect irq suspend with CONFIG_PM   Allen Martin
• [PATCH] ARM: tegra: suspend: protect suspend functions with CONFIG_PM   Allen Martin
• [PATCH 1/2] ARM: kexec: Add missing memory clobber to inline asm in crash_setup_regs()   Dave Martin
• [PATCH 2/2] ARM: kexec: Fix crash_setup_regs() for ARMv7 and CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH] ARM: kuser: Fix incorrect cmpxchg syscall in kuser helpers   Dave Martin
• [PATCH] ARM: mxc: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH] ARM: RealView: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH] ARM: s5pv310: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH 1/7] ARM: kexec: Correct data alignment for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH 2/7] ARM: vfp: Correct data alignment for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH 3/7] ARM: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in bootp/init.S   Dave Martin
• [PATCH 4/7] ARM: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in kernel/head.S   Dave Martin
• [PATCH 5/7] ARM: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in mm/proc-v7.S   Dave Martin
• [PATCH 6/7] ARM: Thumb-2: Fix CONFIG_THUMB2_KERNEL breakage in compressed/head.S   Dave Martin
• [PATCH 7/7] ARM: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH] ARM: ux500: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH] ARM: vexpress: Correct data alignment in headsmp.S for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH 7/7] ARM: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH 7/7] ARM: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH 4/7] ARM: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in kernel/head.S   Dave Martin
• [PATCH 7/7 v1.1] ARM: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH 7/7 v1.1] ARM: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v2 0/9] ARM: Thumb-2: Various fixes for building Thumb-2 kernels   Dave Martin
• [PATCH v2 1/9] ARM: kexec: Correct data alignment for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v2 2/9] ARM: vfp: Correct data alignment for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v2 3/9] ARM: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in bootp/init.S   Dave Martin
• [PATCH v2 4/9] ARM: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in kernel/head.S   Dave Martin
• [PATCH v2 5/9] ARM: Thumb-2: Correct data alignment for CONFIG_THUMB2_KERNEL in mm/proc-v7.S   Dave Martin
• [PATCH v2 6/9] ARM: Thumb-2: Fix CONFIG_THUMB2_KERNEL breakage in compressed/head.S   Dave Martin
• [PATCH v2 7/9] ARM: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v2 8/9] ARM: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2.   Dave Martin
• [PATCH v2 9/9] ARM: kprobes: Don't HAVE_KPROBES when CONFIG_THUMB2_KERNEL is selected   Dave Martin
• [PATCH] ARM: Allow SMP_ON_UP to work with Thumb-2 kernels.   Dave Martin
• [PATCH v2 7/9] ARM: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v2.1] ARM: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH v2 8/9] ARM: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2.   Dave Martin
• [PATCH] ARM: Allow SMP_ON_UP to work with Thumb-2 kernels.   Dave Martin
• [PATCH v2 9/9] ARM: kprobes: Don't HAVE_KPROBES when CONFIG_THUMB2_KERNEL is selected   Dave Martin
• linux-next: omap2plus_defconfig not building   Dave Martin
• linux-next: omap2plus_defconfig not building   Dave Martin
• [PATCH v2] ARM: Allow SMP_ON_UP to work with Thumb-2 kernels.   Dave Martin
• [PATCH v2] ARM: Allow SMP_ON_UP to work with Thumb-2 kernels.   Dave Martin
• [PATCH] ARM: omap: Enable low-level omap3 PM code to work with CONFIG_THUMB2_KERNEL   Dave Martin
• [PATCH 2/2] ARM: kexec: Fix crash_setup_regs() for ARMv7 and CONFIG_THUMB2_KERNEL   Dave P. Martin
• 'perf test' failed on ARM   Arnaldo Carvalho de Melo
• [PATCH] omap4: enable L2 prefetching   Nishanth Menon
• [PATCH v4] OMAP2+: PM: omap device: API's for handling mstandby mode   Nishanth Menon
• ASoC: fix the building issue of missing codec field in 'struct snd_soc_card'   Eric Miao
• [PATCH] mach-pxa: sharpsl_pm: simplify conditional   Eric Miao
• ASoC: fix the building issue of missing codec field in 'struct snd_soc_card'   Eric Miao
• [PATCH 01/17] ARM: pxa: Fix missing includes   Eric Miao
• [PATCH 02/17] ARM: pxa: Access SMEMC via virtual addresses   Eric Miao
• [PATCH 03/17] ARM: pxa: Toradex Colibri PXA270 CF support   Eric Miao
• [PATCH 04/17] ARM: pxa: Push Colibri evalboard MFP into module files   Eric Miao
• [PATCH 06/17] ARM: pxa: Rename Colibri evalboard   Eric Miao
• [PATCH 02/17] ARM: pxa: Access SMEMC via virtual addresses   Eric Miao
• [GIT PULL] pxa fixes for v2.6.37-rc1   Eric Miao
• [PATCH] ARM: pxa: fix the building failue on saar   Eric Miao
• CONFIG_FORCE_MAX_ZONEORDER settable for all ARM architectures   Eric Miao
• [RFC PATCH v3] ARM: Introduce patching of phys_to_virt and vice versa   Eric Miao
• Single binary kernel for all i.MX   Eric Miao
• [PATCH 1/9] ARM: pxa: redefine the cpu_is_pxa3xx   Eric Miao
• [PATCH 3/9] ARM: pxa: fix typo error in pxa3xx   Eric Miao
• [PATCH 6/9] ARM: pxa: support pxa95x   Eric Miao
• [PATCH 2/9] ARM: pxa: redefine irqs.h   Eric Miao
• [PATCH 8/9] ARM: pxa: add iwmmx support for PJ4   Eric Miao
• [PATCH] PalmTX: Fix ifdef around gen_nand driver registration   Eric Miao
• [PATCH 1/2] ARM: mmp2: add mmc resource   Eric Miao
• [PATCH 2/2] ARM: mmp2: add sd card to jasper   Eric Miao
• [PATCH] [ARM] dove: add support for CM-A510 machine.   Eric Miao
• [PATCH 8/9] ARM: pxa: add iwmmx support for PJ4   Eric Miao
• [PATCH 01/11] ARM: pxa: redefine the cpu_is_pxa3xx   Eric Miao
• [PATCH 02/11] ARM: pxa: redefine irqs.h   Eric Miao
• [PATCH 03/11] ARM: pxa: split pxa93x from pxa3xx   Eric Miao
• [PATCH 04/11] ARM: pxa: update to read ICHP   Eric Miao
• [PATCH] ARM: fix some trivial compiler warnings   Eric Miao
• suspicious code in linux/arch/arm/common/sa1111.c   Eric Miao
• [PATCH 01/11] ARM: pxa: redefine the cpu_is_pxa3xx   Eric Miao
• [PATCH 1/9] ARM: pxa: redefine the cpu_is_pxa3xx   Eric Miao
• [PATCH 2/9] ARM: pxa: redefine irqs.h   Eric Miao
• [PATCH 3/9] ARM: pxa: support pxa95x   Eric Miao
• [PATCH 3/9] ARM: pxa: support pxa95x   Eric Miao
• [PATCH 1/2] video: add driver for PXA3xx 2D graphics accelerator   Eric Miao
• [PATCH 2/2] ARM: pxa/raumfeld: enable PXA3XX_GCU driver   Eric Miao
• [PATCH 1/2] ARM: pxa: replace duplicated macro DEFINE_PXA3_CK() with DEFINE_CK()   Eric Miao
• [PATCH 2/2] ARM: pxa: separate the clock support into clock-{pxa2xx, pxa3xx}.c   Eric Miao
• [PATCH 3/9] ARM: pxa: support pxa95x   Eric Miao
• [PATCH] ARM: Allow machine to specify it's own IRQ handlers at run-time   Eric Miao
• [PATCH] ARM: mmp: remove pxa_register_device   Eric Miao
• [PATCH 2/2] USB: pxa: Add USB client support for Marvell PXA9xx/PXA168 chips   Eric Miao
• [PATCH 1/2] pxa: add usb clock for pxa168/pxa910   Eric Miao
• [PATCH 3/9] ARM: pxa: support pxa95x   Eric Miao
• highmem and VMALLOC_END   Eric Miao
• [PATCH 1/2] pxa: add usb clock for pxa168/pxa910   Eric Miao
• [PATCH] ARM: mmp: append brownstone support   Eric Miao
• [PATCH 1/8] ARM: pxa: append missing class register for clock sysdev   Eric Miao
• [PATCH 2/8] ARM: pxa: support pxa95x   Eric Miao
• [PATCH 3/8] ARM: pxa: support saarb platform   Eric Miao
• [PATCH 4/8] ARM: mmp: select CPU_PJ4   Eric Miao
• [PATCH 5/8] ARM: pxa: sanitize IRQ registers access based on offset   Eric Miao
• [PATCH 6/8] ARM: pxa: auto compute shift and mult of timer   Eric Miao
• [PATCH 7/8] ARM: pxa: add 32KHz timer as clock source   Eric Miao
• [PATCH 09/17] UCB1400: Pass ucb1400-gpio data through ac97 bus   Eric Miao
• [PATCH] Kirkwood: Add support for 6282 based QNAP devices   Martin Michlmayr
• [PATCH] Kirkwood: Add support for 6282 based QNAP devices   Martin Michlmayr
• [PATCH] econet: Move to staging; remove from defconfig   David Miller
• [PATCH] econet: Move to staging; remove from defconfig   David Miller
• [PATCH] [ARM] gic: Unmask private interrupts on all cores during IRQ enable   Milton Miller
• About multi-line printk and the need (not) to repeat loglevel markers [Was: Re: [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera]   Michał Mirosław
• [PATCH] ARM: Gemini: Add support for PCI Bus   Michał Mirosław
• [PATCH] ARM: Gemini: Add support for PCI Bus   Michał Mirosław
• [PATCH v3 04/22] arm: introduce little-endian bitops   Akinobu Mita
• [PATCH] arm: Fix GIC distributor initialisation   Pawel Moll
• [PATCH] arm: GIC: Do not try to register more then NR_IRQS interrupts   Pawel Moll
• [PATCH] arm: GIC: Do not try to register more then NR_IRQS interrupts   Pawel Moll
• [PATCH v2] arm: GIC: Do not try to register more then NR_IRQS interrupts   Pawel Moll
• [PATCH v2] arm: GIC: Do not try to register more then NR_IRQS interrupts   Pawel Moll
• [PATCH v3] arm: GIC: Do not try to register more then NR_IRQS interrupts   Pawel Moll
• [Questions] How to run 'perf top' on ARM to profile kernel functions with modules loaded   Ingo Molnar
• [patch v4 0/2] ARM: mach-shmobile: Add zboot support for SuperH Mobile ARM   Kuninori Morimoto
• [PATCH 1/4] proc/vmcore: allow archs to override vmcore_elf_check_arch()   Andrew Morton
• [PATCH 00/14] Improvements to the MSM IOMMU driver   Stepan Moskovchenko
• [PATCH 01/14] msm: iommu: Increase maximum MID size to 5 bits   Stepan Moskovchenko
• [PATCH 02/14] msm: iomap: Addresses and IRQs for 2nd GFX core IOMMU   Stepan Moskovchenko
• [PATCH 03/14] msm: iommu: Use more consistent naming in platform data   Stepan Moskovchenko
• [PATCH 04/14] msm: iommu: Revise GFX3D IOMMU contexts and M2V mappings   Stepan Moskovchenko
• [PATCH 05/14] msm: iommu: Revise GFX2D0 IOMMU contexts and M2V mappings   Stepan Moskovchenko
• [PATCH 06/14] msm: iommu: Support for the 2nd GFX core's IOMMU   Stepan Moskovchenko
• [PATCH 07/14] msm: iommu: Mark functions with the right section names   Stepan Moskovchenko
• [PATCH 08/14] msm: iommu: Don't flush page tables if no devices attached   Stepan Moskovchenko
• [PATCH 09/14] msm: iommu: Kconfig option for cacheable page tables   Stepan Moskovchenko
• [PATCH 10/14] msm: iommu: Check if device is already attached   Stepan Moskovchenko
• [PATCH 11/14] msm: iommu: Kconfig dependency for the IOMMU API   Stepan Moskovchenko
• [PATCH 12/14] msm: iommu: Definitions for extended memory attributes   Stepan Moskovchenko
• [PATCH 13/14] msm: iommu: Support cache-coherent memory access   Stepan Moskovchenko
• [PATCH 14/14] msm: iommu: Miscellaneous code cleanup   Stepan Moskovchenko
• [PATCH 09/14] msm: iommu: Kconfig option for cacheable page tables   Stepan Moskovchenko
• [PATCH 14/14] msm: iommu: Miscellaneous code cleanup   Stepan Moskovchenko
• [PATCH 09/14 v2] msm: iommu: Kconfig item for cacheable page tables   Stepan Moskovchenko
• [PATCH 09/14] msm: iommu: Kconfig option for cacheable page tables   Stepan Moskovchenko
• [PATCH 12/14 v2] msm: iommu: Definitions for extended memory attributes   Stepan Moskovchenko
• [PATCH 13/14 v2] msm: iommu: Support cache-coherent memory access   Stepan Moskovchenko
• [PATCH 0/3] msm: iommu: Further improvements to the MSM IOMMU driver   Stepan Moskovchenko
• [PATCH 1/3] msm: iommu: Add bus clocks to platform data   Stepan Moskovchenko
• [PATCH 2/3] msm: iommu: Clock control for the IOMMU driver   Stepan Moskovchenko
• [PATCH 3/3] msm: iommu: Rework clock logic and add IOMMU bus clock control   Stepan Moskovchenko
• [PATCH 2/3] msm: iommu: Clock control for the IOMMU driver   Stepan Moskovchenko
• [PATCH 3/3] msm: iommu: Rework clock logic and add IOMMU bus clock control   Stepan Moskovchenko
• [PATCH v2 2/3] msm: iommu: Clock control for the IOMMU driver   Stepan Moskovchenko
• [PATCH v2 3/3] msm: iommu: Rework clock logic and add IOMMU bus clock control   Stepan Moskovchenko
• [PATCH 6/6 v2] ARM: Add support for the display controllers in VT8500 and WM8505   Paul Mundt
• [PATCH 6/6 v3] ARM: Add support for the display controllers in VT8500 and WM8505   Paul Mundt
• [PATCH 6/6 v3] ARM: Add support for the display controllers in VT8500 and WM8505   Paul Mundt
• [PATCH 6/6 v4] ARM: Add support for the display controllers in VT8500 and WM8505   Paul Mundt
• [PATCH 6/6 v4] ARM: Add support for the display controllers in VT8500 and WM8505   Paul Mundt
• [PATCH 6/6 v3] ARM: Add support for the display controllers in VT8500 and WM8505   Paul Mundt
• [PATCH 6/6 v3] ARM: Add support for the display controllers in VT8500 and WM8505   Paul Mundt
• [PATCH 3/4] s3c-fb: Add support S5PV310 FIMD   Paul Mundt
• [PATCH 3/4] s3c-fb: Add support S5PV310 FIMD   Paul Mundt
• [PATCH v4] arm & sh: factorised duplicated clkdev.c   Paul Mundt
• [PATCH] ARM: mach-shmobile: Initial AG5 and AG5EVM support   Paul Mundt
• [PATCH 0/3] S5PV210: added MIPI-DSI driver.   Paul Mundt
• boot decompressor code error   Brian Murphy
• boot decompressor code error   Brian Murphy
• boot decompressor code error   Brian Murphy
• [PATCH 3/4] S5PC110: add MIPI-DSI support for platform and machine.   Sylwester Nawrocki
• [PATCH 4/4] S5PC110: add MIPI-DSI driver.   Sylwester Nawrocki
• [PATCH 3/4] S5PC110: add MIPI-DSI support for platform and machine.   Sylwester Nawrocki
• [PATCH 1/5] OMAP4: PM: Use the low-power state change feature on   Rajendra Nayak
• [RFCv6 00/13] The Contiguous Memory Allocator framework   Michal Nazarewicz
• [RFCv6 01/13] lib: rbtree: rb_root_init() function added   Michal Nazarewicz
• [RFCv6 02/13] lib: bitmap: Added alignment offset for bitmap_find_next_zero_area()   Michal Nazarewicz
• [RFCv6 03/13] lib: genalloc: Generic allocator improvements   Michal Nazarewicz
• [RFCv6 04/13] mm: cma: Contiguous Memory Allocator added   Michal Nazarewicz
• [RFCv6 05/13] mm: cma: debugfs support added   Michal Nazarewicz
• [RFCv6 06/13] mm: cma: Best-fit algorithm added   Michal Nazarewicz
• [RFCv6 07/13] mm: cma: Test device and application added   Michal Nazarewicz
• [RFCv6 08/13] mm: move some functions to page_isolation.c   Michal Nazarewicz
• [RFCv6 09/13] mm: alloc_contig_free_pages() added   Michal Nazarewicz
• [RFCv6 10/13] mm: MIGRATE_CMA migration type added   Michal Nazarewicz
• [RFCv6 11/13] mm: MIGRATE_CMA isolation functions added   Michal Nazarewicz
• [RFCv6 12/13] mm: cma: Migration support added [wip]   Michal Nazarewicz
• [RFCv6 13/13] ARM: cma: Added CMA to Aquila, Goni and c210 universal boards   Michal Nazarewicz
• PXA3xx 2D graphics accelerator   Sven Neumann
• [PATCH] arch/arm/kernel: use cpu_relax() in halt loops   Jonathan Neuschäfer
• [PATCH v2 2/4] drivers: hwspinlock: add OMAP implementation   Ionut Nicu
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Nori, Sekhar
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Nori, Sekhar
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Nori, Sekhar
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Nori, Sekhar
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Nori, Sekhar
• ARM stacktrace and SMP   Jeff Ohlstein
• [PATCH 1/9] spi/pxa2xx: don't use subys initcall for driver init   Antonio Ospite
• [PATCH] AT91 USB Serial Device   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH TRIVIAL] AT91: usb: fix typo in atmel_usba_udc driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4] arm & sh: factorised duplicated clkdev.c   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v4] arm & sh: factorised duplicated clkdev.c   Jean-Christophe PLAGNIOL-VILLARD
• rm9200: update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/6] at91: Convert remaining boards to new-style UART initialization   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] at91rm9200dk: fix warning: 'dk_mmc_data' defined but not used   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] at91rm9200ek: fix warning: 'ek_mmc_data' defined but not used   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6] at91/picotux200: fix warning: 'picotux200_mmc_data' defined but not used   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] at91: rename rm9200ek and rm9200dk board file name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] atmel_spi: fix warning In function 'atmel_spi_dma_map_xfer'   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] atmel_spi: fix warning In function 'atmel_spi_dma_map_xfer'   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6] at91/picotux200: fix warning: 'picotux200_mmc_data' defined but not used   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] atmel_spi: fix warning In function 'atmel_spi_dma_map_xfer'   Jean-Christophe PLAGNIOL-VILLARD
• rm9200: update   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7 v2] at91: Convert remaining boards to new-style UART initialization   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7 v2] at91rm9200dk: fix warning: 'dk_mmc_data' defined but not used   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7 v2] at91rm9200ek: fix warning: 'ek_mmc_data' defined but not used   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7 v2] at91: rename rm9200ek and rm9200dk board file name   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7 v2] at91/picotux200: remove commenting usb device and dataflash support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] atmel_spi: fix warning In function 'atmel_spi_dma_map_xfer'   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] at91/board-yl-9200: fix typo in video support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] MMC: Fix multiblock SDIO transfers in AT91 MCI   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mach-pcm037_eet: Fix section mismatch for eet_init_devices()   Alberto Panizzo
• [patch v4 06/10] efikamx: add leds support   Alberto Panizzo
• [patch v4 06/10] efikamx: add leds support   Alberto Panizzo
• [PATCH 2/2] backlight: Fix blanking for L4F00242T03 LCD   Alberto Panizzo
• [PATCH 2/2] backlight: Fix blanking for L4F00242T03 LCD   Alberto Panizzo
• [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera   Alberto Panizzo
• [PATCH] make mc13783 code generic   Alberto Panizzo
• [PATCH] arm: Fix HAVE_S3C2410_WATCHDOG warnings   Kyungmin Park
• [PATCH] arm: Fix HAVE_S3C2410_WATCHDOG warnings   Kyungmin Park
• [Questions] How to run 'perf top' on ARM to profile kernel functions with modules loaded   Kyungmin Park
• [PATCH] ARM: Common GIC entry macro code V2   Kyungmin Park
• [PATCH] ARM: Common GIC entry macro code V2   Kyungmin Park
• ARM: fix compile warning in mm/init.c   Kyungmin Park
• [PATCH 1/3] rtc: rtc-s3c: Fix return type and argument of s3c_rtc_setaie   Kyungmin Park
• [PATCH] ARM: Set bit 22 in the PL310 (cache controller) AuxCtlr register   Kyungmin Park
• [PATCH] ARM: l2x0: Check the correct address range   Kyungmin Park
• [PATCH] ARM: Fix spinlock bad magic on disabling nonboot cpu   Kyungmin Park
• w1-gpio oops   Alan Pearson
• w1-gpio oops   Alan Pearson
• w1-gpio oops   Alan Pearson
• w1-gpio oops   Alan Pearson
• w1-gpio oops   Alan Pearson
• [PATCH 0/7] Convert sprintf_symbol uses to %p[Ss]   Joe Perches
• [PATCH 1/7] arch/arm/kernel/traps.c: Convert sprintf_symbol to %pS   Joe Perches
• [PATCH] arch/arm/plat-mxc/cpufreq.c: Fix line continuation defect   Joe Perches
• [PATCH] arch/arm/plat-mxc/cpufreq.c: Fix line continuation defect   Joe Perches
• [PATCH] arch/arm/kernel/smp_twd.c: Correct local timer printk decimal output   Joe Perches
• [PATCH v2] msm: smd: Reduce driver log chatter   Joe Perches
• [PATCH 01/10] MCDE: Add hardware abstraction layer   Joe Perches
• [PATCH v3] msm: smd: Reduce driver log chatter   Joe Perches
• [PATCH v4] msm: smd: Reduce driver log chatter   Joe Perches
• [PATCH V2] arch/arm/kernel/smp_twd.c: Correct local timer printk decimal output   Joe Perches
• [PATCH 00/44] remove unnecessary semicolons   Joe Perches
• [PATCH 01/44] arch/arm: Remove unnecessary semicolons   Joe Perches
• [PATCH 28/44] drivers/spi: Remove unnecessary semicolons   Joe Perches
• [PATCH 01/10] MCDE: Add hardware abstraction layer   Joe Perches
• [PATCH 01/10] MCDE: Add hardware abstraction layer   Joe Perches
• [PATCH 01/10] MCDE: Add hardware abstraction layer   Joe Perches
• Weirdo gcc 4.3.x behaviour   Joe Perches
• About multi-line printk and the need (not) to repeat loglevel markers [Was: Re: [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera]   Joe Perches
• [PATCH] ARM: fix build error with GCC 4.5.0   Mikael Pettersson
• [PATCH] ARM: fix build error with GCC 4.5.0   Mikael Pettersson
• [PATCH] ARM: fix build error with GCC 4.5.0   Mikael Pettersson
• [PATCH] ARM: fix build error with GCC 4.5.0   Mikael Pettersson
• Weirdo gcc 4.3.x behaviour   Mikael Pettersson
• [BUG] 2.6.37-rc3 massive interactivity regression on ARM   Mikael Pettersson
• [PATCH] Kirkwood: Add support for 6282 based QNAP devices   Mikael Pettersson
• [PATCH] Kirkwood: Add support for 6282 based QNAP devices   Mikael Pettersson
• Zipit/uboot mmc driver issue   Phip
• Zipit/uboot mmc driver issue   Phip
• [PATCH 4/5] ARM: perf: encode PMU name in arm_pmu structure   Jean Pihet
• [PATCH 0/5] ARM: perf: split up perf_event.c by architecture   Jean Pihet
• [PATCH 1/5] ARM: perf: consolidate common PMU behaviour   Jean Pihet
• [PATCH 3/5] ARM: perf: add _init() functions to PMUs   Jean Pihet
• [PATCH 5/5] ARM: perf: separate PMU backends into multiple files   Jean Pihet
• [PATCH v2] ARM: perf: split up perf_event.c by architecture   Jean Pihet
• [PATCH v2] ARM: perf: split up perf_event.c by architecture   Jean Pihet
• OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled   Jean Pihet
• OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled   Jean Pihet
• OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled   Jean Pihet
• Smargo Cardreader problem with QNAP-TS119(2.6.32-5-kirkwood)   Nicolas Pitre
• [PATCHv2 1/3] ARM: Translate delay.S into (mostly) C   Nicolas Pitre
• [PATCH 3/3] ARM: atomic64: use generic implementation for OABI configurations   Nicolas Pitre
• [RFC PATCH v3] ARM: Introduce patching of phys_to_virt and vice versa   Nicolas Pitre
• One quick quenstion about PXA sched_clock resolution?   Nicolas Pitre
• One quick quenstion about PXA sched_clock resolution?   Nicolas Pitre
• [PATCH 8/9] ARM: pxa: add iwmmx support for PJ4   Nicolas Pitre
• [RFC PATCH v3] ARM: Introduce patching of phys_to_virt and vice versa   Nicolas Pitre
• [PATCH] [ARM] dove: add support for CM-A510 machine.   Nicolas Pitre
• [PATCH] ARM: add MAINTAINERS entry for Marvell Dove SoC   Nicolas Pitre
• [RFC PATCH v3] ARM: Introduce patching of phys_to_virt and vice versa   Nicolas Pitre
• [PATCH 8/9] ARM: pxa: add iwmmx support for PJ4   Nicolas Pitre
• [PATCH] ARM: add MAINTAINERS entry for Marvell Dove SoC   Nicolas Pitre
• [PATCH] RFC: nomadik: expand timesource to 63 bits   Nicolas Pitre
• [PATCH] RFC: nomadik: expand timesource to 63 bits   Nicolas Pitre
• [PATCH 10/11] ARM: pxa: add 32KHz timer as clock source   Nicolas Pitre
• [PATCH 11/11] ARM: pxa: add iwmmx support for PJ4   Nicolas Pitre
• [PATCH v2] ARM: fix compile warning in mm/init.c   Nicolas Pitre
• [PATCH] RFC: nomadik: expand timesource to 63 bits   Nicolas Pitre
• [PATCH] RFC: nomadik: expand timesource to 63 bits   Nicolas Pitre
• Single binary kernel for all i.MX   Nicolas Pitre
• Single binary kernel for all i.MX   Nicolas Pitre
• [PATCH v2] [ARM] Dove: add support for CM-A510 machine.   Nicolas Pitre
• [PATCH v2 03/20] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Nicolas Pitre
• [PATCH v2 03/20] ARM: LPAE: use u32 instead of unsigned long for 32-bit ptes   Nicolas Pitre
• [PATCH 7/7] ARM: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL   Nicolas Pitre
• [PATCH] nomadik: prevent sched_clock() wraparound   Nicolas Pitre
• [PATCH] nomadik: prevent sched_clock() wraparound   Nicolas Pitre
• [PATCH 8/9] ARM: pxa: add 32KHz timer as clock source   Nicolas Pitre
• [PATCH 9/9] ARM: pxa: add iwmmx support for PJ4   Nicolas Pitre
• [PATCH 9/9] ARM: pxa: add iwmmx support for PJ4   Nicolas Pitre
• [PATCH 7/7 v1.1] ARM: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL   Nicolas Pitre
• [PATCH 9/9] ARM: pxa: add iwmmx support for PJ4   Nicolas Pitre
• [PATCH v2 7/9] ARM: Thumb-2: Restore sensible zImage header layout for CONFIG_THUMB2_KERNEL   Nicolas Pitre
• [PATCH v2 9/9] ARM: kprobes: Don't HAVE_KPROBES when CONFIG_THUMB2_KERNEL is selected   Nicolas Pitre
• [PATCH v2 8/9] ARM: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2.   Nicolas Pitre
• [PATCH v2 6/9] ARM: Thumb-2: Fix CONFIG_THUMB2_KERNEL breakage in compressed/head.S   Nicolas Pitre
• [PATCH] ARM: Allow SMP_ON_UP to work with Thumb-2 kernels.   Nicolas Pitre
• [PATCH v2 8/9] ARM: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2.   Nicolas Pitre
• [PATCH v2 8/9] ARM: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2.   Nicolas Pitre
• [PATCH v2 8/9] ARM: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2.   Nicolas Pitre
• [PATCH v2 8/9] ARM: Thumb-2: Fix long-distance conditional branches in head.S for Thumb-2.   Nicolas Pitre
• [PATCH] ARM: Allow SMP_ON_UP to work with Thumb-2 kernels.   Nicolas Pitre
• highmem and VMALLOC_END   Nicolas Pitre
• [PATCH] ARM: Fix find_next_zero_bit and related assembly   Nicolas Pitre
• [PATCH 8/8] ARM: pxa: add iwmmx support for PJ4   Nicolas Pitre
• [PATCH] ARM: Fix find_next_zero_bit and related assembly   Nicolas Pitre
• [PATCH] ARM: Fix find_next_zero_bit and related assembly   Nicolas Pitre
• [PATCH v2] [ARM] Dove: add support for CM-A510 machine.   Nicolas Pitre
• [PATCH v2] ARM: Allow SMP_ON_UP to work with Thumb-2 kernels.   Nicolas Pitre
• [PATCH 52/54] ARM: plat-orion: irq_data conversion.   Nicolas Pitre
• [PATCH 13/54] ARM: dove: irq_data conversion.   Nicolas Pitre
• [PATCH] ARM: io: Fix namespace conflicts.   Poddar, Sourav
• [PATCH] ARM: Stop irqsoff tracing if return to user with interrupts enabled   Todd Poynor
• [PATCH] ARM: Stop irqsoff tracing if return to user with interrupts enabled   Todd Poynor
• [PATCH] ARM: Stop irqsoff trace on return to user   Todd Poynor
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Premi, Sanjeev
• Patch IMX audmux debugfs.   Bill Pringlemeir
• Patch IMX audmux debugfs.   Bill Pringlemeir
• Patch IMX audmux debugfs.   Bill Pringlemeir
• [Patch v3] Fix audmuxv2 debugfs indexing. [was: Patch IMX audmux debugfs.]   Bill Pringlemeir
• [Patch v3] Fix audmuxv2 debugfs indexing.   Bill Pringlemeir
• [Patch v3] Fix audmuxv2 debugfs indexing.   Bill Pringlemeir
• [Patch v3] Fix audmuxv2 debugfs indexing.   Bill Pringlemeir
• [Patch v3] Fix audmuxv2 debugfs indexing.   Bill Pringlemeir
• [Patch v3] Fix audmuxv2 debugfs indexing.   Bill Pringlemeir
• [Patch v3] Fix audmuxv2 debugfs indexing.   Bill Pringlemeir
• [PATCH 2/2] backlight: Fix blanking for L4F00242T03 LCD   Richard Purdie
• [Patch v1] AM35xx: Craneboard: Add USB EHCI support   Srinath R
• Devel error: redefinition of 'struct flash_platform_data'   Alexis RODET
• [PATCH] Renaming 'struct flash_platform_data' into 'struct spi_flash_platform_data' in include/linux/spi/flash.h   Alexis RODET
• [PATCH] Renaming 'struct flash_platform_data' into 'struct spi_flash_platform_data' in include/linux/spi/flash.h   Alexis RODET
• [PATCH 00/10] MCDE: Add frame buffer device driver   Jimmy RUBIN
• [PATCH 01/10] MCDE: Add hardware abstraction layer   Jimmy RUBIN
• [PATCH 01/10] MCDE: Add hardware abstraction layer   Jimmy RUBIN
• [PATCH 07/10] MCDE: Add display subsystem framework   Jimmy RUBIN
• [PATCH 10/10] ux500: MCDE: Add platform specific data   Jimmy RUBIN
• [PATCH 02/10] MCDE: Add configuration registers   Jimmy RUBIN
• [PATCH 08/10] MCDE: Add frame buffer device   Jimmy RUBIN
• PATCH 2/2] ARM: mmp2: add sd card to jasper   Philip Rakity
• [PATCH 0/6] omap: iommu: hwmod support and code reorganization   Ramirez Luna, Omar
• [PATCH v2 1/7] OMAP2: hwmod data: add mailbox data   Ramirez Luna, Omar
• [PATCH v2 3/7] OMAP4: hwmod data: add mailbox data   Ramirez Luna, Omar
• [PATCH v2 6/7] omap: mailbox: fix detection for previously supported chips   Ramirez Luna, Omar
• [PATCH v2 7/7] omap: mailbox: remove unreachable return   Ramirez Luna, Omar
• [PATCH v2 0/7] omap: mailbox: hwmod support and dependent cleanup patches   Ramirez Luna, Omar
• [PATCH 0/6] omap: iommu: hwmod support and code reorganization   Ramirez Luna, Omar
• [PATCH 1/6] omap: iommu: remove redundant clock usage   Ramirez Luna, Omar
• [PATCH 2/6] OMAP3: hwmod data: Add mmu for iva2 and isp   Ramirez Luna, Omar
• [PATCH 3/6] OMAP4: hwmod data: add mmu hwmod for ducati and tesla   Ramirez Luna, Omar
• [PATCH 4/6] omap: iommu: intial hwmod support   Ramirez Luna, Omar
• [PATCH 5/6] omap: iommu: hwmod device enable/disable routines   Ramirez Luna, Omar
• [PATCH 6/6] omap: iommu: code reorganization and cleanup   Ramirez Luna, Omar
• [PATCH 6/6] omap: iommu: code reorganization and cleanup   Ramirez Luna, Omar
• [PATCH v2 6/7] omap: mailbox: fix detection for previously supported chips   Ramirez Luna, Omar
• [PATCH v2 3/7] OMAP4: hwmod data: add mailbox data   Ramirez Luna, Omar
• [PATCH 3/6] OMAP4: hwmod data: add mmu hwmod for ducati and tesla   Ramirez Luna, Omar
• [PATCH 2/6] OMAP3: hwmod data: Add mmu for iva2 and isp   Ramirez Luna, Omar
• [PATCH] OMAP: ZOOM2: Change GPIO to enable LCD NEC NL8048HL11-01B on OMAP34x-II MDP   Ramirez Luna, Omar
• [PATCH v2] ARM: orion5x/kirkwood/mv78xx0: fix MPP configuration corner cases   Mike Rapoport
• [PATCH] [ARM] dove: add support for CM-A510 machine.   Mike Rapoport
• [PATCH] [ARM] dove: add support for CM-A510 machine.   Mike Rapoport
• [PATCH v3 2/2] [ARM] Dove: add support for multi-purpose pins configuration   Mike Rapoport
• [PATCH v4 0/2] [ARM] Dove: add support for MPP configuration   Mike Rapoport
• [PATCH v4 1/2] [ARM] Dove: add support for GPIOs 64-71   Mike Rapoport
• [PATCH v4 2/2] [ARM] Dove: add support for multi-purpose pins configuration   Mike Rapoport
• [PATCH v2] [ARM] Dove: add support for CM-A510 machine.   Mike Rapoport
• [PATCH v2] [ARM] Dove: add support for CM-A510 machine.   Mike Rapoport
• [PATCH v2] [ARM] Dove: add support for CM-A510 machine.   Mike Rapoport
• [PATCH 04/54] ARM: ITE 8152: irq_data conversion.   Mike Rapoport
• MX25 patches   Jaume Ribot
• [PATCH 28/51] ARM: mx25: dynamically allocate mxc-ehci devices   Jaume Ribot
• [stable] Patch Upstream: oprofile, ARM: Release resources on failure   Robert Richter
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Victor Rodriguez
• [PATCH] ftrace/ARM: add ARM support for C version of recordmcount   Steven Rostedt
• [PATCHv2 1/2] ftrace: ignore any ftrace.o in C version of recordmcount   Steven Rostedt
• Please include ux500 core into linux-next   Stephen Rothwell
• [PATCH 00/10] MCDE: Add frame buffer device driver   Jimmy Rubin
• [PATCH 01/10] MCDE: Add hardware abstraction layer   Jimmy Rubin
• [PATCH 02/10] MCDE: Add configuration registers   Jimmy Rubin
• [PATCH 03/10] MCDE: Add pixel processing registers   Jimmy Rubin
• [PATCH 04/10] MCDE: Add formatter registers   Jimmy Rubin
• [PATCH 05/10] MCDE: Add dsi link registers   Jimmy Rubin
• [PATCH 06/10] MCDE: Add generic display   Jimmy Rubin
• [PATCH 07/10] MCDE: Add display subsystem framework   Jimmy Rubin
• [PATCH 08/10] MCDE: Add frame buffer device   Jimmy Rubin
• [PATCH 09/10] MCDE: Add build files and bus   Jimmy Rubin
• [PATCH 10/10] ux500: MCDE: Add platform specific data   Jimmy Rubin
• [PATCH] ARM: fix build error with GCC 4.5.0   Måns Rullgård
• [PATCH] ARM: fix build error with GCC 4.5.0   Måns Rullgård
• [PATCH 5/5] omap4: l2x0: Enable early BRESP bit   Måns Rullgård
• [PATCH 2/5] omap4: l2x0: Construct the AUXCTRL value using defines   Måns Rullgård
• [Repost][PATCH v3 0/2] OMAP3: Display Support   Samreen
• [Repost][PATCH v3 1/2] OMAP3: ZOOM2/3/3630SDP: Add display board file for OMAP3   Samreen
• [Repost][PATCH v3 2/2] OMAP3: Enable display on ZOOM2/3/3630SDP   Samreen
• [PATCH] ARM: imx: fix ehci-mxc build.   Wolfram Sang
• [PATCH] Documentation about RS485 serial communications   Matt Schulte
• [PATCH] Documentation about RS485 serial communications   Matt Schulte
• [PATCH 28/51] ARM: mx25: dynamically allocate mxc-ehci devices   Robert Schwebel
• [PATCH 28/51] ARM: mx25: dynamically allocate mxc-ehci devices   Robert Schwebel
• [PATCH] Documentation about RS485 serial communications   Claudio Scordino
• [patch v3 01/10] efikamx: read board id   Matt Sealey
• [patch v4 06/10] efikamx: add leds support   Matt Sealey
• [patch v4 06/10] efikamx: add leds support   Matt Sealey
• [PATCH] Fix IGEPv2 second MMC channel power supply   Enric Balletbò i Serra
• [PATCH] Fix IGEPv2 second MMC channel power supply   Enric Balletbò i Serra
• [PATCH] ARM: SAMSUNG: Add support for clock debugging through debug-fs interface   Yong Shen
• [PATCH] ARM: SAMSUNG: Add support for clock debugging through debug-fs interface   Yong Shen
• [PATCH] mc13892 regulator enable on mx51 babbage board   Yong Shen
• [PATCH] mc13892 regulator enable on mx51 babbage board   Yong Shen
• [PATCH] mc13892 regulator enable on mx51 babbage board   Yong Shen
• [PATCH] make mc13783 code generic   Yong Shen
• [PATCH] make mc13783 regulator code generic   Yong Shen
• [PATCH] make mc13783 code generic   Yong Shen
• [PATCH] make mc13783 code generic   Yong Shen
• [PATCH] make mc13783 code generic   Yong Shen
• [PATCH] ARM: Temporary fix for broken arch reboot   Shilimkar, Santosh
• [PATCH] ARM: Temporary fix for broken arch reboot   Shilimkar, Santosh
• [PATCH] ARM: Temporary fix for broken arch reboot   Shilimkar, Santosh
• [PATCH] ARM: Common GIC entry macro code   Shilimkar, Santosh
• [PATCH] ARM: Temporary fix for broken arch reboot   Shilimkar, Santosh
• [PATCH 07/07] ARM: Use shared GIC entry macros on OMAP   Shilimkar, Santosh
• [PATCH] ARM: Temporary fix for broken arch reboot   Shilimkar, Santosh
• [PATCH] omap4: enable L2 prefetching   Santosh Shilimkar
• [PATCH 0/5] omap4: l2x0 fixes and cleanup   Santosh Shilimkar
• [PATCH 1/5] ARM: l2x0: Add aux control register bitfields   Santosh Shilimkar
• [PATCH 2/5] omap4: l2x0: Construct the AUXCTRL value using defines   Santosh Shilimkar
• [PATCH 3/5] omap4: l2x0: enable instruction and data prefetching   Santosh Shilimkar
• [PATCH 4/5] omap4: l2x0: Set share override bit   Santosh Shilimkar
• [PATCH 5/5] omap4: l2x0: Enable early BRESP bit   Santosh Shilimkar
• [PATCH 5/5] omap4: l2x0: Enable early BRESP bit   Santosh Shilimkar
• [PATCH] Add call to non-crashing cores through IPI   Santosh Shilimkar
• [PATCH] Add call to non-crashing cores through IPI   Santosh Shilimkar
• [PATCH] ARM: mmp: fix cpuid detection on mmp2   Sergei Shtylyov
• Patch IMX audmux debugfs.   Sergei Shtylyov
• arm smp support patch   Sergei Shtylyov
• [PATCH 3/6] omap:mailbox-fix checkpatch warnings   Sergei Shtylyov
• arm smp support patch   Sergei Shtylyov
• [PATCH v2 20/20] ARM: LPAE: Add the Kconfig entries   Sergei Shtylyov
• [PATCH] Fix IGEPv2 second MMC channel power supply   Sergei Shtylyov
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Sergei Shtylyov
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Sergei Shtylyov
• [PATCH 3/3] OMAP: wd_timer: remove old, dead probing code   Sergei Shtylyov
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Sergei Shtylyov
• [PATCH 5/9] ARM: mmp: select CPU_PJ4   Sergei Shtylyov
• [PATCH v6 05/12] davinci: add spi devices on tnetv107x evm   Sergei Shtylyov
• [PATCH v6 11/12] davinci: add tnetv107x evm backlight device   Sergei Shtylyov
• [PATCH v6 11/12] davinci: add tnetv107x evm backlight device   Sergei Shtylyov
• [Patch v1] AM35xx: Craneboard: Add USB EHCI support   Sergei Shtylyov
• [PATCH 6/6] atmel_spi: fix warning In function 'atmel_spi_dma_map_xfer'   Sergei Shtylyov
• [PATCH v2 9/9] ARM: kprobes: Don't HAVE_KPROBES when CONFIG_THUMB2_KERNEL is selected   Sergei Shtylyov
• [PATCH 1/4] FB: added a structure for CPU interface to linux/fb.h   Sergei Shtylyov
• build failure on ARMv7 while CONFIG_AEABI is disabled   Baruch Siach
• Single binary kernel for all i.MX   Baruch Siach
• [PATCH 1/2] mx25: fix spi device registration typo   Baruch Siach
• [PATCH 2/2] imx: fix USB build when USB gadget is selected   Baruch Siach
• [PATCH 1/2] msm: gpio: Add v2 gpio support to MSM SoCs.   Baruch Siach
• [PATCH v2 1/2] msm: gpio: Add v2 gpio support to MSM SoCs.   Baruch Siach
• [PATCH 38/51] ARM: imx: move mx25 support to mach-imx   Baruch Siach
• [PATCH] Renaming 'struct flash_platform_data' into 'struct spi_flash_platform_data' in include/linux/spi/flash.h   Baruch Siach
• Query about cplusplus in linkage.h   Baruch Siach
• Query about cplusplus in linkage.h   Baruch Siach
• [PATCH] spi/pxa2xx: register driver properly   Sebastian Andrzej Siewior
• SPI support for Sodaville   Sebastian Andrzej Siewior
• [PATCH 1/9] spi/pxa2xx: don't use subys initcall for driver init   Sebastian Andrzej Siewior
• [PATCH 2/9] spi/pxa2xx: add support for shared IRQ handler   Sebastian Andrzej Siewior
• [PATCH 3/9] spi/pxa2xx: Use define for SSSR_TFL_MASK instead of plain numbers   Sebastian Andrzej Siewior
• [PATCH 4/9] arm/pxa2xx: reorgazine SSP and SPI header files   Sebastian Andrzej Siewior
• [PATCH 5/9] spi/pxa2xx: Add CE4100 support   Sebastian Andrzej Siewior
• [PATCH 6/9] spi/pxa2xx: Consider CE4100's FIFO depth   Sebastian Andrzej Siewior
• [PATCH 7/9] spi/pxa2xx: Add chipselect support for Sodaville   Sebastian Andrzej Siewior
• [PATCH 8/9] spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes.   Sebastian Andrzej Siewior
• [PATCH 9/9] spi/pxa2xx: pass of_node to spi device and set a parent device   Sebastian Andrzej Siewior
• [PATCH 1/9] spi/pxa2xx: don't use subys initcall for driver init   Sebastian Andrzej Siewior
• [PATCH 4/9] arm/pxa2xx: reorgazine SSP and SPI header files   Sebastian Andrzej Siewior
• [PATCH 1/9] spi/pxa2xx: don't use subys initcall for driver init   Sebastian Andrzej Siewior
• I2C support for Sodaville   Sebastian Andrzej Siewior
• [PATCH 1/7] i2c/pxa2xx: Don't touch ISAR if not in slave mode   Sebastian Andrzej Siewior
• [PATCH 2/7] arm/pxa2xx: reorganize I2C files   Sebastian Andrzej Siewior
• [PATCH 3/7] i2c/pxa2xx: Add PCI support for PXA I2C controller   Sebastian Andrzej Siewior
• [PATCH 4/7] i2c/pxa2xx: add support for shared IRQ handler   Sebastian Andrzej Siewior
• [PATCH 5/7] i2c/pxa2xx: check timeout correctly   Sebastian Andrzej Siewior
• [PATCH 6/7] i2c/pxa2xx: reset the chip if the bus is not free   Sebastian Andrzej Siewior
• [PATCH 7/7] i2c/pxa2xx: pass of_node from platform driver to adapter   Sebastian Andrzej Siewior
• [PATCH 4/7] i2c/pxa2xx: add support for shared IRQ handler   Sebastian Andrzej Siewior
• [PATCH 6/7] i2c/pxa2xx: reset the chip if the bus is not free   Sebastian Andrzej Siewior
• [PATCH 6/7] i2c/pxa2xx: reset the chip if the bus is not free   Sebastian Andrzej Siewior
• [sodaville] [PATCH 1/9] spi/pxa2xx: don't use subys initcall for driver init   Sebastian Andrzej Siewior
• [sodaville] [PATCH 1/9] spi/pxa2xx: don't use subys initcall for driver init   Sebastian Andrzej Siewior
• [PATCH 2/7] arm/pxa2xx: reorganize I2C files   Sebastian Andrzej Siewior
• [PATCH 3/7] i2c/pxa2xx: Add PCI support for PXA I2C controller   Sebastian Andrzej Siewior
• [sodaville] [PATCH 1/7] i2c/pxa2xx: Don't touch ISAR if not in slave mode   Sebastian Andrzej Siewior
• [RFC v2 0/8] TI DMM-TILER driver   David Sin
• [RFC v2 1/8] TILER-DMM: DMM-PAT driver for TI TILER   David Sin
• [RFC v2 2/8] TILER-DMM: Container manager interface and utility definitons   David Sin
• [RFC v2 3/8] TILER-DMM: Sample TCM implementation: Simple TILER Allocator (SiTA)   David Sin
• [RFC v2 4/8] TILER-DMM: TILER Memory Manager interface and implementation   David Sin
• [RFC v2 5/8] TILER-DMM: TILER interface file and documentation   David Sin
• [RFC v2 6/8] TILER-DMM: Geometry and view manipulation functions   David Sin
• [RFC v2 7/8] TILER-DMM: Main TILER driver implementation   David Sin
• [RFC v2 8/8] TILER-DMM: Linking TILER driver into the Linux kernel build   David Sin
• [PATCH v4 1/2] msm: gpio: Add v2 gpio support to MSM SoCs.   Janakiram Sistla
• [PATCH v4 2/2] msm: gpio: Add irq support to v2 gpiolib.   Janakiram Sistla
• [PATCH v4 2/2] msm: gpio: Add irq support to v2 gpiolib.   Janakiram Sistla
• [PATCH v4 2/2] msm: gpio: Add irq support to v2 gpiolib.   Janakiram Sistla
• [PATCH v4 2/2] msm: gpio: Add irq support to v2 gpiolib.   Janakiram Sistla
• [PATCH v4 2/2] msm: gpio: Add irq support to v2 gpiolib.   Janakiram Sistla
• [PATCH 2.6.36 1/1] kernel SPIN_LOCK_UNLOCKED changed to __SPIN_LOCK_UNLOCKED()   Atul Sowani
• [PATCH 2.6.36 1/1 RESEND] kernel SPIN_LOCK_UNLOCKED changed to __SPIN_LOCK_UNLOCKED()   Atul Sowani
• [PATCH] TS-78xxx NAND resource type should be IORESOURCE_MEM   Michael Spang
• [PATCH] ARM: add support for uncompressed uImage kernel   Alexander Stein
• [AT91SAM9260] kernel hang in at91sam926x_pit_reset()   Alexander Stein
• [AT91SAM9260] kernel hang in at91sam926x_pit_reset()   Alexander Stein
• clock enable for i.mx35 pwm   Alexander Stein
• [PATCH] Documentation about RS485 serial communications   Alexander Stein
• [PATCH] ARM: add support for uncompressed uImage kernel   Alexander Stein
• [PATCH] ARM: add support for uncompressed uImage kernel   Alexander Stein
• [PATCH 2/2] USB: pxa: Add USB client support for Marvell PXA9xx/PXA168 chips   Alan Stern
• [PATCH v2 2/3] ARM: cns3xxx: Add architecture definition for EHCI/OHCI controller   Alan Stern
• [PATCH v3 1/1] USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs   Alan Stern
• [PATCH] arm: fix compilation warning during compilation   Marco Stornelli
• [PATCH] arm: fix compilation warning during compilation   Marco Stornelli
• [PATCH] arm: fix compilation warning during compilation   Marco Stornelli
• [PATCH] ARM amba: optional PrimeCell core voltage switch   Sundar
• [PATCH][ ARM cpu hotplug 2/2 ] Use common cpu hotplug code for UX500   Sundar
• [PATCH v3] msm: smd: Reduce driver log chatter   Brian Swetland
• [PATCH 9/9] ARM: S5PV310: Add audio platform devices   Marek Szyprowski
• [PATCH 3/3] OMAP: use generic panel driver in board files   Taneja, Archit
• [PATCH 0/3] OMAP: DSS2: introduce generic panel display driver   Taneja, Archit
• [PATCH 2/3] OMAP: DSS2: Add generic panel display driver   Taneja, Archit
• [PATCH 1/3] OMAP: use generic panel data in board files   Taneja, Archit
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Taneja, Archit
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Taneja, Archit
• [PATCH 0/3] OMAP: DSS2: introduce generic panel display driver (try #7)   Taneja, Archit
• [PATCH] ARM: add support for uncompressed uImage kernel   Albin Tonnerre
• [PATCH 3/6 v2] input: Add support for VIA VT8500 and compatibles in i8042   Dmitry Torokhov
• About multi-line printk and the need (not) to repeat loglevel markers [Was: Re: [PATCH] ARM: mx3/pcm037: properly allocate memory for mx3-camera]   Linus Torvalds
• [PATCH 28/51] ARM: mx25: dynamically allocate mxc-ehci devices   Michael Trimarchi
• [PATCH] Add call to non-crashing cores through IPI   Maxim Uvarov
• [PATCH] Add call to non-crashing cores through IPI   Maxim Uvarov
• [PATCH] Add call to non-crashing cores through IPI   Maxim Uvarov
• [PATCH 6/6 v3] ARM: Add support for the display controllers in VT8500 and WM8505   Geert Uytterhoeven
• [PATCH 02/10] MCDE: Add configuration registers   Geert Uytterhoeven
• w1-gpio oops   Hemanth V
• w1-gpio oops   Hemanth V
• at91: input overruns question   Aras Vaichas
• arm smp support patch   Scott Valentine
• arm smp support patch   Scott Valentine
• arm smp support patch   Scott Valentine
• arm smp support patch   Scott Valentine
• arm smp support patch   Scott Valentine
• [PATCH 0/2] OMAP: DSS2: Add new display panel   Tomi Valkeinen
• [PATCH 0/2] OMAP: DSS2: Add new display panel   Tomi Valkeinen
• [PATCH 3/3] OMAP: use generic panel driver in board files   Tomi Valkeinen
• [PATCH 1/2] video: omap: vram: remove from normal memory   Tomi Valkeinen
• [PATCH 1/3] OMAP: use generic panel data in board files   Tomi Valkeinen
• [PATCH 1/3] OMAP: use generic panel data in board files   Tomi Valkeinen
• [PATCH 1/3] OMAP: use generic panel data in board files   Tomi Valkeinen
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Tomi Valkeinen
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Tomi Valkeinen
• [PATCH 2/2] omap: rx51: mark reserved memory earlier   Tomi Valkeinen
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Tomi Valkeinen
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Tomi Valkeinen
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Tomi Valkeinen
• [PATCH 0/3] OMAP: DSS2: introduce generic panel display driver (try #8)   Tomi Valkeinen
• [PATCH] OMAP: DSS2: Add back authors of panel-generic.c based drivers   Tomi Valkeinen
• [PATCH 0/3] OMAP: DSS2: introduce generic panel display driver (try #8)   Tomi Valkeinen
• [PATCH 0/3] S5PV210: added MIPI-DSI Driver.   Tomi Valkeinen
• [PATCH] OMAP: ZOOM2: Change GPIO to enable LCD NEC NL8048HL11-01B on OMAP34x-II MDP   Tomi Valkeinen
• [PATCH v4 07/13] OMAP4: DMA: hwmod: add system DMA   Varadarajan, Charulatha
• [PATCH 0/3] OMAP: wd_timer: update integration code to use new hwmod changes   Varadarajan, Charulatha
• [PATCH v7 00/11] OMAP: GPIO: Implement GPIO as a platform device   Varadarajan, Charulatha
• [PATCH v7 01/11] OMAP: GPIO: prepare for platform driver   Varadarajan, Charulatha
• [PATCH v7 02/11] OMAP15xx: GPIO: Introduce support for GPIO init   Varadarajan, Charulatha
• [PATCH v7 03/11] OMAP16xx: GPIO: Introduce support for GPIO init   Varadarajan, Charulatha
• [PATCH v7 04/11] OMAP7xx: GPIO: Introduce support for GPIO init   Varadarajan, Charulatha
• [PATCH v7 05/11] OMAP2420: hwmod data: Add GPIO   Varadarajan, Charulatha
• [PATCH v7 06/11] OMAP2430: hwmod data: Add GPIO   Varadarajan, Charulatha
• [PATCH v7 07/11] OMAP3: hwmod data: Add GPIO   Varadarajan, Charulatha
• [PATCH v7 08/11] OMAP4: hwmod data: Add GPIO   Varadarajan, Charulatha
• [PATCH v7 09/11] OMAP2+: GPIO: device registration   Varadarajan, Charulatha
• [PATCH v7 10/11] OMAP: GPIO: Implement GPIO as a platform device   Varadarajan, Charulatha
• [PATCH v7 11/11] OMAP: GPIO: Remove omap_gpio_init()   Varadarajan, Charulatha
• [PATCH v4 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Varadarajan, Charulatha
• [PATCH v4 1/5] OMAP: mailbox: change full flag per mailbox queue instead of global   Varadarajan, Charulatha
• [PATCH v4 4/5] OMAP: mailbox: send message in process context   Varadarajan, Charulatha
• [PATCH v4 5/5] OMAP: mailbox: add notification support for multiple readers   Varadarajan, Charulatha
• [PATCH v4 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Varadarajan, Charulatha
• [PATCH v4 1/5] OMAP: mailbox: change full flag per mailbox queue instead of global   Varadarajan, Charulatha
• [PATCH v4 5/5] OMAP: mailbox: add notification support for multiple readers   Varadarajan, Charulatha
• [PATCH v7 00/11] OMAP: GPIO: Implement GPIO as a platform device   Varadarajan, Charulatha
• [PATCH v7 05/11] OMAP2420: hwmod data: Add GPIO   Varadarajan, Charulatha
• [PATCH v7 07/11] OMAP3: hwmod data: Add GPIO   Varadarajan, Charulatha
• [PATCH v7 00/11] OMAP: GPIO: Implement GPIO as a platform device   Varadarajan, Charulatha
• [PATCH v4 2/5] OMAP: mailbox: fix rx interrupt disable in omap4   Varadarajan, Charulatha
• [PATCH v7 05/11] OMAP2420: hwmod data: Add GPIO   Varadarajan, Charulatha
• [PATCH v7 05/11] OMAP2420: hwmod data: Add GPIO   Varadarajan, Charulatha
• [PATCH v8 00/11] OMAP: GPIO: Implement GPIO as platform device   Varadarajan, Charulatha
• [PATCH v8 01/11] OMAP: GPIO: prepare for platform driver   Varadarajan, Charulatha
• [PATCH v8 02/11] OMAP15xx: GPIO: Introduce support for GPIO init   Varadarajan, Charulatha
• [PATCH v8 03/11] OMAP16xx: GPIO: Introduce support for GPIO init   Varadarajan, Charulatha
• [PATCH v8 04/11] OMAP7xx: GPIO: Introduce support for GPIO init   Varadarajan, Charulatha
• [PATCH v8 05/11] OMAP2420: hwmod data: Add GPIO   Varadarajan, Charulatha
• [PATCH v8 06/11] OMAP2430: hwmod data: Add GPIO   Varadarajan, Charulatha
• [PATCH v8 07/11] OMAP3: hwmod data: Add GPIO   Varadarajan, Charulatha
• [PATCH v8 08/11] OMAP4: hwmod data: Add GPIO   Varadarajan, Charulatha
• [PATCH v8 09/11] OMAP2+: GPIO: device registration   Varadarajan, Charulatha
• [PATCH v8 10/11] OMAP: GPIO: Implement GPIO as a platform device   Varadarajan, Charulatha
• [PATCH v8 11/11] OMAP: GPIO: Remove omap_gpio_init()   Varadarajan, Charulatha
• [PATCH v7 01/11] OMAP: GPIO: prepare for platform driver   Varadarajan, Charulatha
• [RFC][PATCH 1/1] ARM: Add initial hibernation support   Marek Vasut
• [PATCH 01/17] ARM: pxa: Fix missing includes   Marek Vasut
• [PATCH 02/17] ARM: pxa: Access SMEMC via virtual addresses   Marek Vasut
• [PATCH 03/17] ARM: pxa: Toradex Colibri PXA270 CF support   Marek Vasut
• [PATCH 04/17] ARM: pxa: Push Colibri evalboard MFP into module files   Marek Vasut
• [PATCH 05/17] ARM: pxa: Add M41T00 RTC support into Colibri evalboard   Marek Vasut
• [PATCH 06/17] ARM: pxa: Rename Colibri evalboard   Marek Vasut
• [PATCH 07/17] ARM: pxa: Colibri PXA320 PCMCIA driver   Marek Vasut
• [PATCH 08/17] ARM: pxa: Modularize Palm Tungsten|C   Marek Vasut
• [PATCH 09/17] UCB1400: Pass ucb1400-gpio data through ac97 bus   Marek Vasut
• [PATCH 10/17] ARM: pxa: Correct touch IRQ passing to UCB1400 on vpac270   Marek Vasut
• [PATCH 11/17] ARM: pxa: Pass GPIO offset to ucb1400-gpio on PalmTC   Marek Vasut
• [PATCH 12/17] ARM: pxa: Add gpio-leds and vibrator support to PalmTC   Marek Vasut
• [PATCH 13/17] ARM: pxa: Fix pxa2xx-flash section mismatch   Marek Vasut
• [PATCH 14/17] ARM: pxa: Fix number of IRQs on Balloon3   Marek Vasut
• [PATCH 15/17] ARM: pxa: Update Balloon3 for new FPGA firmware   Marek Vasut
• [PATCH 16/17] SND: Tosa: Fix pointer to codec location   Marek Vasut
• [PATCH 17/17] ARM: pxa/colibri: setup pins for USB host port 3   Marek Vasut
• [PATCH 1/2 v2] ARM: pxa: Access SMEMC via virtual addresses   Marek Vasut
• [PATCH 2/2] ARM: pxa: Add pxa320 PCMCIA check   Marek Vasut
• [PATCH 02/17] ARM: pxa: Access SMEMC via virtual addresses   Marek Vasut
• [PATCH 02/17] ARM: pxa: Access SMEMC via virtual addresses   Marek Vasut
• [PATCH v3] ARM: pxa: Access SMEMC via virtual addresses   Marek Vasut
• [PATCH] PalmTX: Fix ifdef around gen_nand driver registration   Marek Vasut
• hi marek   Marek Vasut
• hi marek   Marek Vasut
• hi marek   Marek Vasut
• Zipit/uboot mmc driver issue   Marek Vasut
• Zipit/uboot mmc driver issue   Marek Vasut
• Zipit/uboot mmc driver issue   Marek Vasut
• [PATCH 00/10] MCDE: Add frame buffer device driver   Hans Verkuil
• [PATCH 00/10] MCDE: Add frame buffer device driver   Hans Verkuil
• [PATCH] ARM: fix build error with GCC 4.5.0   Rabin Vincent
• [PATCH] ARM: fix build error with GCC 4.5.0   Rabin Vincent
• [PATCH] ARM: fix build error with GCC 4.5.0   Rabin Vincent
• [PATCHv2] ARM: ftrace: enable function graph tracer   Rabin Vincent
• [PATCH 1/6] ARM: ensure sched_clock() and children are notrace   Rabin Vincent
• [PATCH 2/6] ARM: place C irq handlers in IRQ_ENTRY for ftrace   Rabin Vincent
• [PATCH 3/6] ARM: ftrace: use gas macros to avoid code duplication   Rabin Vincent
• [PATCH 4/6] ARM: ftrace: function graph tracer support   Rabin Vincent
• [PATCH 5/6] ARM: ftrace: graph tracer + dynamic ftrace   Rabin Vincent
• [PATCH 6/6] ARM: ftrace: enable function graph tracer   Rabin Vincent
• [PATCH 6/6] ARM: ftrace: enable function graph tracer   Rabin Vincent
• [PATCH 1/6] ARM: ensure sched_clock() and children are notrace   Rabin Vincent
• [PATCH] nomadik: prevent sched_clock() wraparound v3   Rabin Vincent
• [PATCH] ARM: versatile: ensure sched_clock() is notrace   Rabin Vincent
• [PATCH] ARM: omap: ensure sched_clock() is notrace   Rabin Vincent
• [PATCH] ARM: u300: ensure sched_clock() is notrace   Rabin Vincent
• [PATCH] ARM: iop: ensure sched_clock() is notrace   Rabin Vincent
• [PATCH 1/6] ARM: ensure sched_clock() and children are notrace   Rabin Vincent
• [GIT PULL] ARM ftrace function graph tracing support   Rabin Vincent
• [PATCH] ftrace/ARM: add ARM support for C version of recordmcount   Rabin Vincent
• [PATCHv2 1/2] ftrace: ignore any ftrace.o in C version of recordmcount   Rabin Vincent
• [PATCHv2 2/2] ftrace/ARM: add ARM support for C version of recordmcount   Rabin Vincent
• [PATCH] perf symbols: remove incorrect open-coded container_of()   Rabin Vincent
• 'perf test' failed on ARM   Rabin Vincent
• Booting CNS3420 EVB v 1.3 failed with 2.6.36 (and 2.6.35)   Anton Vorontsov
• Booting CNS3420 EVB v 1.3 failed with 2.6.36 (and 2.6.35)   Anton Vorontsov
• [PATCH v2 2/3] ARM: cns3xxx: Add architecture definition for EHCI/OHCI controller   Anton Vorontsov
• [PATCH v2 1/3] ARM: cns3xxx: Add new and export the old power management functions   Anton Vorontsov
• [PATCH v2 3/3] USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs   Anton Vorontsov
• [PATCH v2 2/3] ARM: cns3xxx: Add architecture definition for EHCI/OHCI controller   Anton Vorontsov
• [PATCH v2 3/3] USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs   Anton Vorontsov
• [PATCH v2 2/3] ARM: cns3xxx: Add architecture definition for EHCI/OHCI controller   Anton Vorontsov
• [PATCH v2 2/3] ARM: cns3xxx: Add architecture definition for EHCI/OHCI controller   Anton Vorontsov
• [PATCH v3 1/1] USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs   Anton Vorontsov
• [PATCH v3 1/1] USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs   Anton Vorontsov
• [PATCH v3 1/1] USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs   Anton Vorontsov
• [PATCH v3 1/1] USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs   Anton Vorontsov
• [GIT PULL] ARM: CNS3xxx fixes for 2.6.37   Anton Vorontsov
• [PATCH v4 0/8] SMP support for CNS3xxx + some SMP SCU cleanups   Anton Vorontsov
• [PATCH 1/8] ARM: SCU: Add common routines for secondary CPU bootup   Anton Vorontsov
• [PATCH 2/8] ARM: cns3xxx: Add support for SMP   Anton Vorontsov
• [PATCH 3/8] ARM: VExpress: Switch to generic SCU routines   Anton Vorontsov
• [PATCH 4/8] ARM: RealView: Switch to generic SCU routines   Anton Vorontsov
• [PATCH 5/8] ARM: S5PV310: Switch to generic SCU routines   Anton Vorontsov
• [PATCH 6/8] ARM: ux500: Switch to generic SCU routines   Anton Vorontsov
• [PATCH 7/8] ARM: tegra: Switch to generic SCU routines   Anton Vorontsov
• [PATCH 8/8] ARM: OMAP2: Switch to generic SCU routines   Anton Vorontsov
• [PATCH] ARM: TWD: Consolidate local timers support   Anton Vorontsov
• [PATCH] ARM: l2x0: Check the correct address range   Linus WALLEIJ
• [PATCHv2 1/3] ARM: Translate delay.S into (mostly) C   Daniel Walker
• [PATCHv2 1/3] ARM: Translate delay.S into (mostly) C   Daniel Walker
• [PATCHv2 2/3] ARM: Allow machines to override __delay()   Daniel Walker
• [PATCHv2 2/3] ARM: Allow machines to override __delay()   Daniel Walker
• [PATCHv2 2/3] ARM: Allow machines to override __delay()   Daniel Walker
• [PATCHv2 2/3] ARM: Allow machines to override __delay()   Daniel Walker
• [PATCH] ARM: Common GIC entry macro code V2   Daniel Walker
• [PATCH 09/14] msm: iommu: Kconfig option for cacheable page tables   Daniel Walker
• [PATCH 09/14] msm: iommu: Kconfig option for cacheable page tables   Daniel Walker
• [PATCH 14/14] msm: iommu: Miscellaneous code cleanup   Daniel Walker
• [PATCH 1/3] msm: sirc: warning fix   Daniel Walker
• [PATCH 14/14] msm: iommu: Miscellaneous code cleanup   Daniel Walker
• [PATCH 2/3] msm: iommu: Clock control for the IOMMU driver   Daniel Walker
• [PATCH 3/3] msm: iommu: Rework clock logic and add IOMMU bus clock control   Daniel Walker
• [PATCH 3/3] msm: iommu: Rework clock logic and add IOMMU bus clock control   Daniel Walker
• [GIT PULL] Kconfig changes for MSM to enable SMP   Daniel Walker
• [PATCH v4 2/2] msm: gpio: Add irq support to v2 gpiolib.   Daniel Walker
• [PATCH v4 2/2] msm: gpio: Add irq support to v2 gpiolib.   Daniel Walker
• [GIT PULL] Kconfig changes for MSM to enable SMP   Daniel Walker
• [GIT PULL] Kconfig changes for MSM to enable SMP   Daniel Walker
• [PATCH 30/54] ARM: msm: irq_data conversion.   Daniel Walker
• [PATCH 30/54] ARM: msm: irq_data conversion.   Daniel Walker
• OMAP not resuming after waking from suspend to RAM after addition of the new OMAP serial drivers   Laine Walker-Avina
• [PATCH] ARM amba: optional PrimeCell core voltage switch   Linus Walleij
• [PATCH v4 08/12] gpio: add ti-ssp gpio driver   Linus Walleij
• [PATCH] ARM amba: optional PrimeCell core voltage switch   Linus Walleij
• [PATCH v4 08/12] gpio: add ti-ssp gpio driver   Linus Walleij
• [PATCH] mmci: reset voltage after power off.   Linus Walleij
• recent ARM Erratas 742231 & 742230 broken.   Linus Walleij
• [PATCH] ARM: add clean and flush_dcache_all to ARM cache API   Linus Walleij
• [PATCH] ARM: add clean and flush_dcache_all to ARM cache API   Linus Walleij
• [PATCH] pl011: added clock management feature   Linus Walleij
• [PATCH] RFC: nomadik: expand timesource to 63 bits   Linus Walleij
• [PATCH] RFC: nomadik: expand timesource to 63 bits   Linus Walleij
• [PATCH] RFC: nomadik: expand timesource to 63 bits   Linus Walleij
• [PATCH] RFC: nomadik: expand timesource to 63 bits   Linus Walleij
• [PATCH] RFC: nomadik: expand timesource to 63 bits   Linus Walleij
• [PATCH] [ARM] twd: Allow twd rescaling to match cpu frequency   Linus Walleij
• [PATCH] nomadik: prevent sched_clock() wraparound   Linus Walleij
• [PATCH] mmci: handle clock frequency 0 properly   Linus Walleij
• [PATCH] nomadik: prevent sched_clock() wraparound   Linus Walleij
• [PATCH] nomadik: prevent sched_clock() wraparound   Linus Walleij
• [PATCH] nomadik: prevent sched_clock() wraparound   Linus Walleij
• [PATCH] nomadik: prevent sched_clock() wraparound v3   Linus Walleij
• [PATCH] nomadik: prevent sched_clock() wraparound v3   Linus Walleij
• [PATCH] nomadik: prevent sched_clock() wraparound v4   Linus Walleij
• [PATCH] nomadik: prevent sched_clock() wraparound v4   Linus Walleij
• [PATCH] nomadik: prevent sched_clock() wraparound v4   Linus Walleij
• [PATCH] ARM: u300: ensure sched_clock() is notrace   Linus Walleij
• [PATCH] ARM: tegra: timer: Separate clocksource and sched_clock   Linus Walleij
• [PATCH 1/4] mtd: FSMC NAND remove PARTITION macro and fix compile noise   Linus Walleij
• [PATCH 2/4] mtd: FSMC NAND replace all use of uintNN_t with uN   Linus Walleij
• [PATCH 3/4] mtd: FSMC NAND use the PrimeCell identifier macros   Linus Walleij
• [PATCH 4/4] mtd: FSMC NAND fix obvious speling errors   Linus Walleij
• U300/Ux500/Nomadik combine pull requests?   Linus Walleij
• [PATCH 2/4] mtd: FSMC NAND replace all use of uintNN_t with uN   Linus Walleij
• [PATCH 1/3] mtd: FSMC NAND remove PARTITION macro and fix compile noise   Linus Walleij
• [PATCH 2/3] mtd: FSMC NAND use the PrimeCell identifier macros   Linus Walleij
• [PATCH 3/3] mtd: FSMC NAND fix obvious speling errors   Linus Walleij
• [PATCH 3/3] mtd: FSMC NAND fix obvious speling errors   Linus Walleij
• Please include ux500 core into linux-next   Linus Walleij
• [PATCH 09/10] MCDE: Add build files and bus   Linus Walleij
• [PATCH] ARM: ux500: Increased nr of interrupts for ab8500   Mattias Wallin
• [PATCH] ARM: ux500: prcmu db8500 v2 support   Mattias Wallin
• [PATCH 6/6] omap:clocks44x-add dummy clock for mailbox   Paul Walmsley
• [PATCH v5 2/3] OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish   Paul Walmsley
• [PATCH 0/8] OMAP2+: hwmod core upgrades for 2.6.38: first set   Paul Walmsley
• [PATCH 1/8] OMAP2+: io: split omap2_init_common_hw()   Paul Walmsley
• [PATCH 2/8] OMAP2+: hwmod: allow custom pre-shutdown functions   Paul Walmsley
• [PATCH 3/8] OMAP2+: hwmod: add postsetup state   Paul Walmsley
• [PATCH 4/8] OMAP2+: hwmod: add support for per-class custom device reset functions   Paul Walmsley
• [PATCH 5/8] OMAP2+: hwmod: rename omap_hwmod_mutex to _hwmod_list_mutex   Paul Walmsley
• [PATCH 6/8] OMAP2+: hwmod: upgrade per-hwmod mutex to a spinlock   Paul Walmsley
• [PATCH 7/8] OMAP2+: hwmod: fix a warning, add some docs, remove unused fields   Paul Walmsley
• [PATCH 8/8] OMAP2+: hwmod: Update the sysc_cache in case module context is lost   Paul Walmsley
• [PATCH 0/3] OMAP: wd_timer: update integration code to use new hwmod changes   Paul Walmsley
• [PATCH 1/3] OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c   Paul Walmsley
• [PATCH 2/3] OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism   Paul Walmsley
• [PATCH 3/3] OMAP: wd_timer: remove old, dead probing code   Paul Walmsley
• [PATCH 3/3] OMAP: wd_timer: remove old, dead probing code   Paul Walmsley
• [PATCH 0/8] OMAP2+: hwmod core upgrades for 2.6.38: first set   Paul Walmsley
• [PATCH 0/3] OMAP: wd_timer: update integration code to use new hwmod changes   Paul Walmsley
• [PATCH 5/8] OMAP2+: hwmod: rename omap_hwmod_mutex to _hwmod_list_mutex   Paul Walmsley
• [PATCH 0/8] OMAP2+: hwmod core upgrades for 2.6.38: first set   Paul Walmsley
• OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled   Paul Walmsley
• OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled   Paul Walmsley
• OMAP2+: PM/serial: hold console semaphore while OMAP UARTs are disabled   Paul Walmsley
• [PATCH] arm: ixp4xx export symbol dma_set_coherent_mask   Brian Walsh
• imx27: I2C clock frequency   Mattias Walstrom
• [PATCH] MXC IOMUX-V3 replace struct pad_desc with bitmapped cookie (step 2)   Lothar Waßmann
• [patch 1/1] iMX51: introduce MX51_GPIO_NR   Lothar Waßmann
• [PATCH 03/15] ARM: mxs: Add reset routines   Lothar Waßmann
• [PATCH 03/15] ARM: mxs: Add reset routines   Lothar Waßmann
• [PATCH 03/15] ARM: mxs: Add reset routines   Lothar Waßmann
• [PATCH 03/15] ARM: mxs: Add reset routines   Lothar Waßmann
• [PATCH] prevent 'BUG: sleeping function called from invalid context' in arch_reset()   Lothar Waßmann
• [PATCH] OMAP2: Devkit8000: Fix mmc regulator failure   Thomas Weber
• UBIFS oops after remount ro   Wolfgang Wegner
• [PATCH 0/3] ASoC: add support for audio on iPaq hx4700   Harald Welte
• [PATCH V3 0/6] pxa3xx_nand update series set   Lei Wen
• [PATCH 0/4] ARM kdump fixes   Mika Westerberg
• [PATCH 1/4] proc/vmcore: allow archs to override vmcore_elf_check_arch()   Mika Westerberg
• [PATCH 2/4] ARM: provide zero vmcore_elf64_check_arch()   Mika Westerberg
• [PATCH 3/4] ARM: add CONFIG_CRASH_DUMP to Kconfig   Mika Westerberg
• [PATCH 4/4] ARM: memblock: convert reserve_crashkernel() to use memblock   Mika Westerberg
• [PATCH 4/4] ARM: memblock: convert reserve_crashkernel() to use memblock   Mika Westerberg
• [PATCH 1/4] proc/vmcore: allow archs to override vmcore_elf_check_arch()   Mika Westerberg
• [PATCH 1/4] proc/vmcore: allow archs to override vmcore_elf_check_arch()   Mika Westerberg
• [PATCH 2/2] ARM: kexec: Fix crash_setup_regs() for ARMv7 and CONFIG_THUMB2_KERNEL   Mika Westerberg
• [PATCH 2/2] ARM: kexec: Fix crash_setup_regs() for ARMv7 and CONFIG_THUMB2_KERNEL   Mika Westerberg
• [PATCH] Add call to non-crashing cores through IPI   Mika Westerberg
• [PATCH] Add call to non-crashing cores through IPI   Mika Westerberg
• [PATCH v2] Add call to non-crashing cores through IPI   Mika Westerberg
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   Michael Williamson
• [PATCH 0/2] OMAP: DSS2: Add new display panel   Bryan Wu
• [PATCH 0/3] OMAP: DSS2: introduce dummy panel driver   Bryan Wu
• [PATCH 1/3] OMAP: DSS2: Add dummy panel display driver   Bryan Wu
• [PATCH 2/3] OMAP: DSS2: remove dummy panel driver duplicated panel drivers   Bryan Wu
• [PATCH 3/3] OMAP: use dummy panel driver in board files   Bryan Wu
• [PATCH 0/3] OMAP: DSS2: introduce dummy panel driver   Bryan Wu
• [PATCH 1/3] OMAP: DSS2: Add dummy panel display driver   Bryan Wu
• [PATCH 0/3] OMAP: DSS2: introduce generic panel display driver   Bryan Wu
• [PATCH 1/3] OMAP: DSS2: Add generic panel display driver   Bryan Wu
• [PATCH 2/3] OMAP: DSS2: remove generic panel driver duplicated panel drivers   Bryan Wu
• [PATCH 3/3] OMAP: use generic panel driver in board files   Bryan Wu
• [PATCH 3/3] OMAP: use generic panel driver in board files   Bryan Wu
• [PATCH 0/3] OMAP: DSS2: introduce generic panel display driver   Bryan Wu
• [PATCH 0/3] OMAP: DSS2: introduce generic panel display driver (try #3)   Bryan Wu
• [PATCH 1/3] OMAP: use generic panel data in board files   Bryan Wu
• [PATCH 2/3] OMAP: DSS2: Add generic panel display driver   Bryan Wu
• [PATCH 3/3] OMAP: DSS2: remove generic DPI panel driver duplicated panel drivers   Bryan Wu
• [PATCH 1/3] OMAP: use generic panel data in board files   Bryan Wu
• [PATCH 1/3] OMAP: use generic panel data in board files   Bryan Wu
• [PATCH 0/3] OMAP: DSS2: introduce generic panel display driver (try #4)   Bryan Wu
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Bryan Wu
• [PATCH 2/3] OMAP: use generic DPI panel driver in board files   Bryan Wu
• [PATCH 3/3] OMAP: DSS2: remove generic DPI panel driver duplicated panel drivers   Bryan Wu
• [PATCH 0/3] OMAP: DSS2: introduce generic panel display driver (try #5)   Bryan Wu
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Bryan Wu
• [PATCH 2/3] OMAP: use generic DPI panel driver in board files   Bryan Wu
• [PATCH 3/3] OMAP: DSS2: remove generic DPI panel driver duplicated panel drivers   Bryan Wu
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Bryan Wu
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Bryan Wu
• [PATCH 0/3] OMAP: DSS2: introduce generic panel display driver (try #6)   Bryan Wu
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Bryan Wu
• [PATCH 2/3] OMAP: use generic DPI panel driver in board files   Bryan Wu
• [PATCH 3/3] OMAP: DSS2: remove generic DPI panel driver duplicated panel drivers   Bryan Wu
• [PATCH 0/3] OMAP: DSS2: introduce generic panel display driver (try #7)   Bryan Wu
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Bryan Wu
• [PATCH 2/3] OMAP: use generic DPI panel driver in board files   Bryan Wu
• [PATCH 3/3] OMAP: DSS2: remove generic DPI panel driver duplicated panel drivers   Bryan Wu
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Bryan Wu
• [PATCH 0/3] OMAP: DSS2: introduce generic panel display driver (try #8)   Bryan Wu
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Bryan Wu
• [PATCH 2/3] OMAP: use generic DPI panel driver in board files   Bryan Wu
• [PATCH 3/3] OMAP: DSS2: remove generic DPI panel driver duplicated panel drivers   Bryan Wu
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Bryan Wu
• [PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver   Bryan Wu
• [PATCH] OMAP: DSS2: Add back authors of panel-generic.c based drivers   Bryan Wu
• [PATCH 0/3] OMAP: DSS2: introduce generic panel display driver (try #8)   Bryan Wu
• [PATCH 0/3] OMAP: DSS2: introduce generic panel display driver (try #8)   Bryan Wu
• [PATCH 0/3] OMAP: Introduce Backlight driver for Sharp LS037V7DW01 LCD panel   Bryan Wu
• [PATCH 1/3] Backlight: driver for Sharp LS037V7DW01 panel on OMAP machine   Bryan Wu
• [PATCH 2/3] OMAP: move Sharp LS LCD panel device to generic DPI panel driver and new backlight driver   Bryan Wu
• [PATCH 3/3] OMAP: DSS2: remove Sharp LS037V7DW01 panel driver   Bryan Wu
• [PATCH] OMAP: kill all section mismatch warning for omap2plus_defconfig   Bryan Wu
• [PATCH TRIVIAL] AT91: usb: fix typo in atmel_usba_udc driver   Josh Wu
• [PATCH v5 04/12] spi: add ti-ssp spi master driver   Rafael J. Wysocki
• [PATCH 2/2] USB: pxa: Add USB client support for Marvell PXA9xx/PXA168 chips   Chao Xie
• [PATCH 1/2] pxa: add usb clock for pxa168/pxa910   Chao Xie
• highmem and VMALLOC_END   Chao Xie
• [PATCH 2/7] ARM i.MX irq: Compile avic irq code only on SoCs that need it   Paulius Zaleckas
• [PATCH] mini6410: add audio codec support   Paulius Zaleckas
• [PATCH] real6410: add audio codec support   Paulius Zaleckas
• [PATCH] ASoC: add codec support for mini6410 and real6410 boards   Paulius Zaleckas
• [PATCH] ARM: Gemini: Add support for PCI Bus   Paulius Zaleckas
• [PATCH] ARM: Gemini: Add support for PCI BUS   Paulius Zaleckas
• [PATCH] ARM: Gemini: Add support for PCI BUS   Paulius Zaleckas
• [PATCH] ARM: Gemini: Add support for PCI BUS   Paulius Zaleckas
• [PATCH] ARM: Gemini: Add support for PCI BUS   Paulius Zaleckas
• [PATCH] ARM: Gemini: Add support for PCI BUS   Paulius Zaleckas
• [PATCH 0/5] mx51: Add PWM support   Richard Zhao
• [PATCHv5 1/3] ARM: imx: Add core definitions for MX53   Richard Zhao
• [PATCH] imx: dma: remove SDMA_IS_MERGED   Richard Zhao
• [patch 1/1] iMX51: introduce MX51_GPIO_NR   Richard Zhao
• [PATCH 1/1] arm: imx: share imx5x_register_gpios for mach-mx5   Richard Zhao
• [PATCH 1/1] arm: imx: share imx5x_register_gpios for mach-mx5   Richard Zhao
• [PATCH 1/1] arm: imx: share imx5x_register_gpios for mach-mx5   Richard Zhao
• [PATCH 1/1] arm: imx: share imx5x_register_gpios for mach-mx5   Richard Zhao
• [PATCH V2 1/1] arm: imx: share imx5x_register_gpios for mach-mx5   Richard Zhao
• [PATCH 1/1] arm: imx: share imx5x_register_gpios for mach-mx5   Richard Zhao
• [PATCH] ARM: pxa: fix the building failue on saar   Haojian Zhuang
• [PATCH 2/2] ARM: pxa/saar: fix the building failure caused by typo   Haojian Zhuang
• [PATCH] ARM: pxa: fix the building failue on saar   Haojian Zhuang
• build failure on ARMv7 while CONFIG_AEABI is disabled   Haojian Zhuang
• build failure on ARMv7 while CONFIG_AEABI is disabled   Haojian Zhuang
• [PATCH 1/9] ARM: pxa: redefine the cpu_is_pxa3xx   Haojian Zhuang
• [PATCH 2/9] ARM: pxa: redefine irqs.h   Haojian Zhuang
• [PATCH 3/9] ARM: pxa: fix typo error in pxa3xx   Haojian Zhuang
• [PATCH 4/9] ARM: pxa: split pxa93x from pxa3xx   Haojian Zhuang
• [PATCH 5/9] ARM: pxa: update to read ICHP   Haojian Zhuang
• [PATCH 6/9] ARM: pxa: support pxa95x   Haojian Zhuang
• [PATCH 7/9] ARM: mmp: select CPU_PJ4   Haojian Zhuang
• [PATCH 8/9] ARM: pxa: add iwmmx support for PJ4   Haojian Zhuang
• [PATCH 9/9] ARM: pxa: sanitize IRQ registers access based on offset   Haojian Zhuang
• [PATCH 1/2] ARM: mmp2: add mmc resource   Haojian Zhuang
• [PATCH 2/2] ARM: mmp2: add sd card to jasper   Haojian Zhuang
• [PATCH 6/9] ARM: pxa: support pxa95x   Haojian Zhuang
• [PATCH 1/8] ARM: pxa: redefine the cpu_is_pxa3xx   Haojian Zhuang
• [PATCH 2/8] ARM: pxa: redefine irqs.h   Haojian Zhuang
• [PATCH 3/8] ARM: pxa: split pxa93x from pxa3xx   Haojian Zhuang
• [PATCH 4/8] ARM: pxa: update to read ICHP   Haojian Zhuang
• [PATCH 5/8] ARM: pxa: support pxa95x   Haojian Zhuang
• [PATCH 6/8] ARM: pxa: support saarb platform   Haojian Zhuang
• [PATCH 7/8] ARM: mmp: select CPU_PJ4   Haojian Zhuang
• [PATCH 8/8] ARM: pxa: sanitize IRQ registers access based on offset   Haojian Zhuang
• [PATCH 8/9] ARM: pxa: add iwmmx support for PJ4   Haojian Zhuang
• [PATCH 8/9] ARM: pxa: add iwmmx support for PJ4   Haojian Zhuang
• hi marek   Haojian Zhuang
• [PATCH 01/11] ARM: pxa: redefine the cpu_is_pxa3xx   Haojian Zhuang
• [PATCH 02/11] ARM: pxa: redefine irqs.h   Haojian Zhuang
• [PATCH 03/11] ARM: pxa: split pxa93x from pxa3xx   Haojian Zhuang
• [PATCH 04/11] ARM: pxa: update to read ICHP   Haojian Zhuang
• [PATCH 05/11] ARM: pxa: support pxa95x   Haojian Zhuang
• [PATCH 06/11] ARM: pxa: support saarb platform   Haojian Zhuang
• [PATCH 07/11] ARM: mmp: select CPU_PJ4   Haojian Zhuang
• [PATCH 08/11] ARM: pxa: sanitize IRQ registers access based on offset   Haojian Zhuang
• [PATCH 09/11] ARM: pxa: auto compute shift and mult of timer   Haojian Zhuang
• [PATCH 10/11] ARM: pxa: add 32KHz timer as clock source   Haojian Zhuang
• [PATCH 11/11] ARM: pxa: add iwmmx support for PJ4   Haojian Zhuang
• [PATCH 03/11] ARM: pxa: split pxa93x from pxa3xx   Haojian Zhuang
• [PATCH 05/11] ARM: pxa: support pxa95x   Haojian Zhuang
• [PATCH 04/11] ARM: pxa: update to read ICHP   Haojian Zhuang
• [PATCH 10/11] ARM: pxa: add 32KHz timer as clock source   Haojian Zhuang
• [PATCH 1/9] ARM: pxa: redefine the cpu_is_pxa3xx   Haojian Zhuang
• [PATCH 2/9] ARM: pxa: redefine irqs.h   Haojian Zhuang
• [PATCH 3/9] ARM: pxa: support pxa95x   Haojian Zhuang
• [PATCH 4/9] ARM: pxa: support saarb platform   Haojian Zhuang
• [PATCH 5/9] ARM: mmp: select CPU_PJ4   Haojian Zhuang
• [PATCH 6/9] ARM: pxa: sanitize IRQ registers access based on offset   Haojian Zhuang
• [PATCH 7/9] ARM: pxa: auto compute shift and mult of timer   Haojian Zhuang
• [PATCH 8/9] ARM: pxa: add 32KHz timer as clock source   Haojian Zhuang
• [PATCH 9/9] ARM: pxa: add iwmmx support for PJ4   Haojian Zhuang
• [PATCH 9/9] ARM: pxa: add iwmmx support for PJ4   Haojian Zhuang
• [PATCH 9/9] ARM: pxa: add iwmmx support for PJ4   Haojian Zhuang
• [PATCH 8/9] ARM: pxa: add 32KHz timer as clock source   Haojian Zhuang
• [PATCH 5/9] ARM: mmp: select CPU_PJ4   Haojian Zhuang
• [PATCH 3/9] ARM: pxa: support pxa95x   Haojian Zhuang
• [PATCH 3/9] ARM: pxa: support pxa95x   Haojian Zhuang
• [PATCH] ARM: mmp: remove pxa_register_device   Haojian Zhuang
• [PATCH 1/2] ARM: pxa: replace duplicated macro DEFINE_PXA3_CK() with DEFINE_CK()   Haojian Zhuang
• [PATCH 3/9] ARM: pxa: support pxa95x   Haojian Zhuang
• [PATCH 2/2] ARM: pxa: separate the clock support into clock-{pxa2xx,pxa3xx}.c   Haojian Zhuang
• [PATCH 1/8] ARM: pxa: append missing class register for clock sysdev   Haojian Zhuang
• [PATCH 2/8] ARM: pxa: support pxa95x   Haojian Zhuang
• [PATCH 3/8] ARM: pxa: support saarb platform   Haojian Zhuang
• [PATCH 4/8] ARM: mmp: select CPU_PJ4   Haojian Zhuang
• [PATCH 5/8] ARM: pxa: sanitize IRQ registers access based on offset   Haojian Zhuang
• [PATCH 6/8] ARM: pxa: auto compute shift and mult of timer   Haojian Zhuang
• [PATCH 7/8] ARM: pxa: add 32KHz timer as clock source   Haojian Zhuang
• [PATCH 8/8] ARM: pxa: add iwmmx support for PJ4   Haojian Zhuang
• [question] NR_IRQS in genirq   Haojian Zhuang
• [PATCH 1/9] spi/pxa2xx: don't use subys initcall for driver init   Haojian Zhuang
• [PATCH 4/9] arm/pxa2xx: reorgazine SSP and SPI header files   Haojian Zhuang
• [PATCH 1/9] spi/pxa2xx: don't use subys initcall for driver init   Haojian Zhuang
• [PATCH 4/7] i2c/pxa2xx: add support for shared IRQ handler   Haojian Zhuang
• [PATCH 6/7] i2c/pxa2xx: reset the chip if the bus is not free   Haojian Zhuang
• [PATCH 6/7] i2c/pxa2xx: reset the chip if the bus is not free   Haojian Zhuang
• [PATCH] ARM: mmp: append brownstone support   Haojian Zhuang
• [PATCH] ARM: mmp: append brownstone support   Haojian Zhuang
• [PATCH 6/7] i2c/pxa2xx: reset the chip if the bus is not free   Haojian Zhuang
• [Questions] How to run 'perf top' on ARM to profile kernel functions with modules loaded   Peter Zijlstra
• [Questions] How to run 'perf top' on ARM to profile kernel functions with modules loaded   Peter Zijlstra
• [PATCH 48/54] ARM: w90x900: irq_data conversion.   Wan ZongShun
• [PATCH 34/54] ARM: nuc93x: irq_data conversion.   Wan ZongShun
• [PATCH] Fix IGEPv2 second MMC channel power supply   Marc Zyngier
• [PATCH] Fix IGEPv2 second MMC channel power supply   Marc Zyngier
• [PATCH] Fix IGEPv2 second MMC channel power supply   Marc Zyngier
• [PATCH v2] Fix IGEPv2 second MMC channel power supply   Marc Zyngier
• [PATCH v2 1/1] ARM Orion: added Buffalo LS-CHL support   hughes ash
• [PATCH] [ARM] dove: add support for CM-A510 machine.   saeed bishara
• [PATCH] [ARM] dove: add support for CM-A510 machine.   saeed bishara
• [PATCH 1/6 v4] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   saeed bishara
• [PATCH 1/6 v4] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   saeed bishara
• [PATCH v3 2/2] [ARM] Dove: add support for multi-purpose pins configuration   saeed bishara
• [PATCH] ARM: add MAINTAINERS entry for Marvell Dove SoC   saeed bishara
• [PATCH v2] [ARM] Dove: add support for CM-A510 machine.   saeed bishara
• [PATCH v4 1/2] [ARM] Dove: add support for GPIOs 64-71   saeed bishara
• [PATCH v4 2/2] [ARM] Dove: add support for multi-purpose pins configuration   saeed bishara
• [PATCH v4 1/2] MMC: add support for the Marvell Dove SDHCI controller   saeed bishara
• [PATCH v4 2/2] [ARM] Dove: rename SDHCI devices to "sdhci-dove"   saeed bishara
• [PATCH v4 1/2] MMC: add support for the Marvell Dove SDHCI controller   saeed bishara
• [PATCH] Kirkwood: Add support for 6282 based QNAP devices   saeed bishara
• hi marek   dylan cristiani
• hi marek   dylan cristiani
• [PATCH 0/3] S5PV210: added MIPI-DSI Driver.   daeinki
• [PATCH 0/3] S5PV210: added MIPI-DSI Driver.   daeinki
• [PATCH 28/51] ARM: mx25: dynamically allocate mxc-ehci devices   jaume at fqingenieria.es
• [PATCH 28/51] ARM: mx25: dynamically allocate mxc-ehci devices   jaume at fqingenieria.es
• [PATCH 1/2] ARM: imx: Add core definitions for MX53   Dinh.Nguyen at freescale.com
• [PATCH 2/2] ARM: imx: Add mx53 support to common msl functions.   Dinh.Nguyen at freescale.com
• [PATCH] ARM: imx: Add support for low power suspend on MX51.   Dinh.Nguyen at freescale.com
• [PATCHv2 1/2] ARM: imx: Add core definitions for MX53   Dinh.Nguyen at freescale.com
• [PATCHv2 2/2] ARM: imx: Add mx53 support to common msl functions.   Dinh.Nguyen at freescale.com
• [PATCHv3 1/2] ARM: imx: Add core definitions for MX53   Dinh.Nguyen at freescale.com
• [PATCHv3 2/2] ARM: imx: Add mx53 support to common msl functions.   Dinh.Nguyen at freescale.com
• [PATCHv2] ARM: imx: Add support for low power suspend on MX51.   Dinh.Nguyen at freescale.com
• [PATCHv3] ARM: imx: Add support for low power suspend on MX51.   Dinh.Nguyen at freescale.com
• [PATCHv4 1/3] ARM: imx: Add core definitions for MX53   Dinh.Nguyen at freescale.com
• [PATCHv4 2/3] ARM: imx: Add mx53 support to common msl functions.   Dinh.Nguyen at freescale.com
• [PATCHv4 3/3] ARM: imx: Get the silicon version from the IIM module   Dinh.Nguyen at freescale.com
• [PATCHv5 1/3] ARM: imx: Add core definitions for MX53   Dinh.Nguyen at freescale.com
• [PATCHv5 2/3] ARM: imx: Add mx53 support to common msl functions.   Dinh.Nguyen at freescale.com
• [PATCHv5 3/3] ARM: imx: Get the silicon version from the IIM module   Dinh.Nguyen at freescale.com
• [PATCH] ARM: imx: Return the correct chip version instead of zero for mx51 and mx53   Dinh.Nguyen at freescale.com
• [PATCH] ARM: imx: Add mx53 changes to crm_regs   Dinh.Nguyen at freescale.com
• [PATCH] ARM: imx: Add support for low power suspend on MX51.   Dinh.Nguyen at freescale.com
• [PATCH 1/2] ARM: mmp2: add mmc resource   zhangfei gao
• [PATCH 2/2] ARM: mmp2: add sd card to jasper   zhangfei gao
• [PATCH v1 1/1]sdhci-pxa: init_sdh for different platform   zhangfei gao
• rm9200: update   avictor.za at gmail.com
• [PATCH 2/2] ARM: pxa/saar: fix the building failure caused by typo   eric.y.miao at gmail.com
• Calling conventions for IAR   jonsmirl at gmail.com
• Calling conventions for IAR   jonsmirl at gmail.com
• [PATCH 1/1] ARM: cns3xxx: Fixup the missing second parameter to addruart macro to allow them to build.   mkl0301 at gmail.com
• [PATCH 0/3] USB: add support for CNS3XXX SOC's EHCI/OHCI controller   mkl0301 at gmail.com
• [PATCH 1/3] ARM: cns3xxx: Add new and export the old power management functions   mkl0301 at gmail.com
• [PATCH 2/3] ARM: cns3xxx: Add architecture definition for EHCI/OHCI controller   mkl0301 at gmail.com
• [PATCH 3/3] USB: cns3xxx: Add EHCI and OHCI bus glue for CNS3XXX SOCs   mkl0301 at gmail.com
• [PATCH v2 0/3] USB: add support for cns3xxx SOC's EHCI/OHCI controller   mkl0301 at gmail.com
• [PATCH v2 1/3] ARM: cns3xxx: Add new and export the old power management functions   mkl0301 at gmail.com
• [PATCH v2 2/3] ARM: cns3xxx: Add architecture definition for EHCI/OHCI controller   mkl0301 at gmail.com
• [PATCH v2 3/3] USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs   mkl0301 at gmail.com
• [PATCH v3 1/1] USB: cns3xxx: Add EHCI and OHCI bus glue for cns3xxx SOCs   mkl0301 at gmail.com
• [PATCH v8 1/9] davinci: EMAC support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v8 2/9] davinci: EDMA support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v8 4/9] davinci: McASP configuration for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v8 5/9] davinci: Audio support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v8 6/9] davinci: MMC/SD and USB-OHCI configuration for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v8 7/9] davinci: MMC/SD support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v8 8/9] davinci: USB clocks for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH v8 9/9] davinci: USB1.1 support for Omapl138-Hawkboard   vm.rod25 at gmail.com
• [PATCH V2 21/69] Keyboard: Adding support for spear-keyboard   viresh kumar
• [PATCH V2 28/69] ST SPEAr: Adding machine support for nand   viresh kumar
• [PATCH] arm: plat-spear: time: use IS_ERR() instead of NULL check   viresh kumar
• [PATCH 53/54] ARM: plat-spear: irq_data conversion.   viresh kumar
• [PATCH 1/2] pxa: add usb clock for pxa168/pxa910   chao.xie at marvell.com
• [PATCH 2/2] USB: pxa: Add USB client support for Marvell PXA9xx/PXA168 chips   chao.xie at marvell.com
• [Patch v5] OMAP: AM3517/05: Add craneboard support   srinath at mistralsolutions.com
• [Patch v1] AM35xx: Craneboard: Add USB EHCI support   srinath at mistralsolutions.com
• [Patch v2] AM35xx: Craneboard: Add USB EHCI support   srinath at mistralsolutions.com
• One quick quenstion about PXA sched_clock resolution?   rocky
• Query about cplusplus in linkage.h   rocky
• Query about cplusplus in linkage.h   rocky
• Query about cplusplus in linkage.h   rocky
• Size of dma_alloc_writecombine.   vipul samar
• [PATCH] ARM: SAMSUNG: Add support for clock debugging through debug-fs interface   amit.daniel at samsung.com
• [PATCH V2 28/69] ST SPEAr: Adding machine support for nand   stanley.miao
• [PATCH] RFC: nomadik: expand timesource to 63 bits   john stultz
• [PATCH] RFC: nomadik: expand timesource to 63 bits   john stultz
• [PATCH] nomadik: prevent sched_clock() wraparound   john stultz
• [PATCH] ARM: tegra: timer: Separate clocksource and sched_clock   john stultz
• IMX Spi and 24bit data.   bpringle at sympatico.ca
• [PATCH] pl011: added clock management feature   Grzegorz.Sygieda at tieto.com
• [PATCH] pl011: added clock management feature   Grzegorz.Sygieda at tieto.com
• [PATCH] pl011: added clock management feature   Grzegorz.Sygieda at tieto.com
• composite gadget driver want use 8 endpoints ,but my mcu only has 6 endpoints include control ep0   Zhilong zhang