[PATCH 28/51] ARM: mx25: dynamically allocate mxc-ehci devices

[jaume at fqingenieria.es]

Hi,

Sorry for previous email. I have missed reading this response. Now this
point it's clear.

Regards.

> Hi Uwe,
>
> 2010/11/27 Uwe Kleine-König <u.kleine-koenig at pengutronix.de>:
>> Hello Jaume,
>>
>> On Fri, Nov 26, 2010 at 04:04:58PM +0100, Jaume Ribot wrote:
>>> Dear Uwe,
>>>
>>> I think there is an error in the Freescale documentation, as new 0x200
>>> offset (as it might be according reference manual) makes usbh2 stops
>>> working.
>>>
>>> Other users have experienced simmilar issues:
>>> http://forums.freescale.com/t5/i-MX-Microprocessors/i-MX25-USBOH-host-core-port-on-chip-serial-PHY-Control/m-p/59365
>>>
>>> I think old 0x400 offset value were correct.
>>> Anyone can confirm?
>> Maybe one of the Freescale guys?  (Added to Cc:)
>>
> I confirmed it with i.MX25 design team that offset 0x400 is the
> correct one, and 0x200 will not work.  I will ping documentation team
> to get this document error fixed.
>
> --
> Regards,
> Shawn
>