[PATCH 2/8] ARM: pxa: support pxa95x
Eric Miao
eric.y.miao at gmail.com
Mon Nov 29 01:58:59 EST 2010
On Wed, Nov 24, 2010 at 11:54 AM, Haojian Zhuang
<haojian.zhuang at marvell.com> wrote:
> The core of PXA955 is PJ4. Add new PJ4 support. And add new macro
> CONFIG_PXA95x.
>
> Signed-off-by: Haojian Zhuang <haojian.zhuang at marvell.com>
> Cc: Eric Miao <eric.y.miao at gmail.com>
Applied.
> ---
> arch/arm/mach-pxa/Kconfig | 12 +-
> arch/arm/mach-pxa/Makefile | 1 +
> arch/arm/mach-pxa/clock-pxa3xx.c | 2 +-
> arch/arm/mach-pxa/clock.h | 2 +-
> arch/arm/mach-pxa/devices.c | 247 ++++++++++++------------
> arch/arm/mach-pxa/generic.c | 8 +-
> arch/arm/mach-pxa/generic.h | 3 +-
> arch/arm/mach-pxa/include/mach/hardware.h | 34 +++-
> arch/arm/mach-pxa/include/mach/irqs.h | 1 +
> arch/arm/mach-pxa/pxa3xx.c | 6 -
> arch/arm/mach-pxa/pxa930.c | 2 +-
> arch/arm/mach-pxa/pxa95x.c | 308 +++++++++++++++++++++++++++++
> arch/arm/mm/Kconfig | 6 +
> arch/arm/plat-pxa/Makefile | 1 +
> arch/arm/plat-pxa/include/plat/mfp.h | 4 +-
> 15 files changed, 486 insertions(+), 151 deletions(-)
> create mode 100644 arch/arm/mach-pxa/pxa95x.c
>
> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
> index dd235ec..d407659 100644
> --- a/arch/arm/mach-pxa/Kconfig
> +++ b/arch/arm/mach-pxa/Kconfig
> @@ -651,11 +651,17 @@ config CPU_PXA935
> help
> PXA935 (codename Tavor-P65)
>
> -config CPU_PXA950
> +config PXA95x
> bool
> - select CPU_PXA930
> + select CPU_PJ4
> + help
> + Select code specific to PXA95x variants
> +
> +config CPU_PXA955
> + bool
> + select PXA95x
> help
> - PXA950 (codename Tavor-PV2)
> + PXA950 (codename MG1)
>
> config PXA_SHARP_C7xx
> bool
> diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
> index c90789e..d7f3592 100644
> --- a/arch/arm/mach-pxa/Makefile
> +++ b/arch/arm/mach-pxa/Makefile
> @@ -19,6 +19,7 @@ endif
> obj-$(CONFIG_PXA25x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa25x.o
> obj-$(CONFIG_PXA27x) += mfp-pxa2xx.o clock-pxa2xx.o pxa2xx.o pxa27x.o
> obj-$(CONFIG_PXA3xx) += mfp-pxa3xx.o clock-pxa3xx.o pxa3xx.o smemc.o pxa3xx-ulpi.o
> +obj-$(CONFIG_PXA95x) += mfp-pxa3xx.o clock-pxa3xx.o pxa95x.o smemc.o
> obj-$(CONFIG_CPU_PXA300) += pxa300.o
> obj-$(CONFIG_CPU_PXA320) += pxa320.o
> obj-$(CONFIG_CPU_PXA930) += pxa930.o
> diff --git a/arch/arm/mach-pxa/clock-pxa3xx.c b/arch/arm/mach-pxa/clock-pxa3xx.c
> index dd122d9..25be4ad 100644
> --- a/arch/arm/mach-pxa/clock-pxa3xx.c
> +++ b/arch/arm/mach-pxa/clock-pxa3xx.c
> @@ -192,7 +192,7 @@ struct sysdev_class pxa3xx_clock_sysclass = {
>
> static int __init pxa3xx_clock_init(void)
> {
> - if (cpu_is_pxa3xx())
> + if (cpu_is_pxa3xx() || cpu_is_pxa95x())
> return sysdev_class_register(&pxa3xx_clock_sysclass);
> return 0;
> }
> diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
> index cf2cbd0..3a60752 100644
> --- a/arch/arm/mach-pxa/clock.h
> +++ b/arch/arm/mach-pxa/clock.h
> @@ -56,7 +56,7 @@ void clk_pxa2xx_cken_disable(struct clk *clk);
>
> extern struct sysdev_class pxa2xx_clock_sysclass;
>
> -#ifdef CONFIG_PXA3xx
> +#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
> #define DEFINE_PXA3_CKEN(_name, _cken, _rate, _delay) \
> struct clk clk_##_name = { \
> .ops = &clk_pxa3xx_cken_ops, \
> diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
> index aaa1166..022c2fa 100644
> --- a/arch/arm/mach-pxa/devices.c
> +++ b/arch/arm/mach-pxa/devices.c
> @@ -342,27 +342,6 @@ struct platform_device pxa27x_device_i2c_power = {
> };
> #endif
>
> -#ifdef CONFIG_PXA3xx
> -static struct resource pxa3xx_resources_i2c_power[] = {
> - {
> - .start = 0x40f500c0,
> - .end = 0x40f500d3,
> - .flags = IORESOURCE_MEM,
> - }, {
> - .start = IRQ_PWRI2C,
> - .end = IRQ_PWRI2C,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -struct platform_device pxa3xx_device_i2c_power = {
> - .name = "pxa3xx-pwri2c",
> - .id = 1,
> - .resource = pxa3xx_resources_i2c_power,
> - .num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power),
> -};
> -#endif
> -
> static struct resource pxai2s_resources[] = {
> {
> .start = 0x40400000,
> @@ -633,30 +612,35 @@ struct platform_device pxa25x_device_assp = {
> #endif /* CONFIG_PXA25x */
>
> #if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
> -
> -static struct resource pxa27x_resource_keypad[] = {
> +static struct resource pxa27x_resource_camera[] = {
> [0] = {
> - .start = 0x41500000,
> - .end = 0x4150004c,
> + .start = 0x50000000,
> + .end = 0x50000fff,
> .flags = IORESOURCE_MEM,
> },
> [1] = {
> - .start = IRQ_KEYPAD,
> - .end = IRQ_KEYPAD,
> + .start = IRQ_CAMERA,
> + .end = IRQ_CAMERA,
> .flags = IORESOURCE_IRQ,
> },
> };
>
> -struct platform_device pxa27x_device_keypad = {
> - .name = "pxa27x-keypad",
> - .id = -1,
> - .resource = pxa27x_resource_keypad,
> - .num_resources = ARRAY_SIZE(pxa27x_resource_keypad),
> +static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
> +
> +static struct platform_device pxa27x_device_camera = {
> + .name = "pxa27x-camera",
> + .id = 0, /* This is used to put cameras on this interface */
> + .dev = {
> + .dma_mask = &pxa27x_dma_mask_camera,
> + .coherent_dma_mask = 0xffffffff,
> + },
> + .num_resources = ARRAY_SIZE(pxa27x_resource_camera),
> + .resource = pxa27x_resource_camera,
> };
>
> -void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
> +void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
> {
> - pxa_register_device(&pxa27x_device_keypad, info);
> + pxa_register_device(&pxa27x_device_camera, info);
> }
>
> static u64 pxa27x_ohci_dma_mask = DMA_BIT_MASK(32);
> @@ -689,6 +673,33 @@ void __init pxa_set_ohci_info(struct pxaohci_platform_data *info)
> {
> pxa_register_device(&pxa27x_device_ohci, info);
> }
> +#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
> +
> +#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
> +static struct resource pxa27x_resource_keypad[] = {
> + [0] = {
> + .start = 0x41500000,
> + .end = 0x4150004c,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = IRQ_KEYPAD,
> + .end = IRQ_KEYPAD,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +struct platform_device pxa27x_device_keypad = {
> + .name = "pxa27x-keypad",
> + .id = -1,
> + .resource = pxa27x_resource_keypad,
> + .num_resources = ARRAY_SIZE(pxa27x_resource_keypad),
> +};
> +
> +void __init pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info)
> +{
> + pxa_register_device(&pxa27x_device_keypad, info);
> +}
>
> static u64 pxa27x_ssp1_dma_mask = DMA_BIT_MASK(32);
>
> @@ -833,79 +844,9 @@ struct platform_device pxa27x_device_pwm1 = {
> .resource = pxa27x_resource_pwm1,
> .num_resources = ARRAY_SIZE(pxa27x_resource_pwm1),
> };
> -
> -static struct resource pxa27x_resource_camera[] = {
> - [0] = {
> - .start = 0x50000000,
> - .end = 0x50000fff,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = IRQ_CAMERA,
> - .end = IRQ_CAMERA,
> - .flags = IORESOURCE_IRQ,
> - },
> -};
> -
> -static u64 pxa27x_dma_mask_camera = DMA_BIT_MASK(32);
> -
> -static struct platform_device pxa27x_device_camera = {
> - .name = "pxa27x-camera",
> - .id = 0, /* This is used to put cameras on this interface */
> - .dev = {
> - .dma_mask = &pxa27x_dma_mask_camera,
> - .coherent_dma_mask = 0xffffffff,
> - },
> - .num_resources = ARRAY_SIZE(pxa27x_resource_camera),
> - .resource = pxa27x_resource_camera,
> -};
> -
> -void __init pxa_set_camera_info(struct pxacamera_platform_data *info)
> -{
> - pxa_register_device(&pxa27x_device_camera, info);
> -}
> -#endif /* CONFIG_PXA27x || CONFIG_PXA3xx */
> +#endif /* CONFIG_PXA27x || CONFIG_PXA3xx || CONFIG_PXA95x*/
>
> #ifdef CONFIG_PXA3xx
> -static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
> -
> -static struct resource pxa3xx_resource_ssp4[] = {
> - [0] = {
> - .start = 0x41a00000,
> - .end = 0x41a0003f,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = IRQ_SSP4,
> - .end = IRQ_SSP4,
> - .flags = IORESOURCE_IRQ,
> - },
> - [2] = {
> - /* DRCMR for RX */
> - .start = 2,
> - .end = 2,
> - .flags = IORESOURCE_DMA,
> - },
> - [3] = {
> - /* DRCMR for TX */
> - .start = 3,
> - .end = 3,
> - .flags = IORESOURCE_DMA,
> - },
> -};
> -
> -struct platform_device pxa3xx_device_ssp4 = {
> - /* PXA3xx SSP is basically equivalent to PXA27x */
> - .name = "pxa27x-ssp",
> - .id = 3,
> - .dev = {
> - .dma_mask = &pxa3xx_ssp4_dma_mask,
> - .coherent_dma_mask = DMA_BIT_MASK(32),
> - },
> - .resource = pxa3xx_resource_ssp4,
> - .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4),
> -};
> -
> static struct resource pxa3xx_resources_mci2[] = {
> [0] = {
> .start = 0x42000000,
> @@ -984,6 +925,54 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
> pxa_register_device(&pxa3xx_device_mci3, info);
> }
>
> +static struct resource pxa3xx_resources_gcu[] = {
> + {
> + .start = 0x54000000,
> + .end = 0x54000fff,
> + .flags = IORESOURCE_MEM,
> + },
> + {
> + .start = IRQ_GCU,
> + .end = IRQ_GCU,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
> +
> +struct platform_device pxa3xx_device_gcu = {
> + .name = "pxa3xx-gcu",
> + .id = -1,
> + .num_resources = ARRAY_SIZE(pxa3xx_resources_gcu),
> + .resource = pxa3xx_resources_gcu,
> + .dev = {
> + .dma_mask = &pxa3xx_gcu_dmamask,
> + .coherent_dma_mask = 0xffffffff,
> + },
> +};
> +
> +#endif /* CONFIG_PXA3xx */
> +
> +#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x)
> +static struct resource pxa3xx_resources_i2c_power[] = {
> + {
> + .start = 0x40f500c0,
> + .end = 0x40f500d3,
> + .flags = IORESOURCE_MEM,
> + }, {
> + .start = IRQ_PWRI2C,
> + .end = IRQ_PWRI2C,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +struct platform_device pxa3xx_device_i2c_power = {
> + .name = "pxa3xx-pwri2c",
> + .id = 1,
> + .resource = pxa3xx_resources_i2c_power,
> + .num_resources = ARRAY_SIZE(pxa3xx_resources_i2c_power),
> +};
> +
> static struct resource pxa3xx_resources_nand[] = {
> [0] = {
> .start = 0x43100000,
> @@ -1027,33 +1016,45 @@ void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
> pxa_register_device(&pxa3xx_device_nand, info);
> }
>
> -static struct resource pxa3xx_resources_gcu[] = {
> - {
> - .start = 0x54000000,
> - .end = 0x54000fff,
> +static u64 pxa3xx_ssp4_dma_mask = DMA_BIT_MASK(32);
> +
> +static struct resource pxa3xx_resource_ssp4[] = {
> + [0] = {
> + .start = 0x41a00000,
> + .end = 0x41a0003f,
> .flags = IORESOURCE_MEM,
> },
> - {
> - .start = IRQ_GCU,
> - .end = IRQ_GCU,
> + [1] = {
> + .start = IRQ_SSP4,
> + .end = IRQ_SSP4,
> .flags = IORESOURCE_IRQ,
> },
> + [2] = {
> + /* DRCMR for RX */
> + .start = 2,
> + .end = 2,
> + .flags = IORESOURCE_DMA,
> + },
> + [3] = {
> + /* DRCMR for TX */
> + .start = 3,
> + .end = 3,
> + .flags = IORESOURCE_DMA,
> + },
> };
>
> -static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
> -
> -struct platform_device pxa3xx_device_gcu = {
> - .name = "pxa3xx-gcu",
> - .id = -1,
> - .num_resources = ARRAY_SIZE(pxa3xx_resources_gcu),
> - .resource = pxa3xx_resources_gcu,
> +struct platform_device pxa3xx_device_ssp4 = {
> + /* PXA3xx SSP is basically equivalent to PXA27x */
> + .name = "pxa27x-ssp",
> + .id = 3,
> .dev = {
> - .dma_mask = &pxa3xx_gcu_dmamask,
> - .coherent_dma_mask = 0xffffffff,
> + .dma_mask = &pxa3xx_ssp4_dma_mask,
> + .coherent_dma_mask = DMA_BIT_MASK(32),
> },
> + .resource = pxa3xx_resource_ssp4,
> + .num_resources = ARRAY_SIZE(pxa3xx_resource_ssp4),
> };
> -
> -#endif /* CONFIG_PXA3xx */
> +#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
>
> /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
> * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
> diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
> index d2bb071..d6e15f7 100644
> --- a/arch/arm/mach-pxa/generic.c
> +++ b/arch/arm/mach-pxa/generic.c
> @@ -29,6 +29,7 @@
> #include <mach/reset.h>
> #include <mach/gpio.h>
> #include <mach/smemc.h>
> +#include <mach/pxa3xx-regs.h>
>
> #include "generic.h"
>
> @@ -36,9 +37,10 @@ void clear_reset_status(unsigned int mask)
> {
> if (cpu_is_pxa2xx())
> pxa2xx_clear_reset_status(mask);
> -
> - if (cpu_is_pxa3xx())
> - pxa3xx_clear_reset_status(mask);
> + else {
> + /* RESET_STATUS_* has a 1:1 mapping with ARSR */
> + ARSR = mask;
> + }
> }
>
> unsigned long get_clock_tick_rate(void)
> diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
> index 0569d82..6205dc9 100644
> --- a/arch/arm/mach-pxa/generic.h
> +++ b/arch/arm/mach-pxa/generic.h
> @@ -20,6 +20,7 @@ extern void __init pxa26x_init_irq(void);
> #endif
> extern void __init pxa27x_init_irq(void);
> extern void __init pxa3xx_init_irq(void);
> +extern void __init pxa95x_init_irq(void);
>
> extern void __init pxa_map_io(void);
> extern void __init pxa25x_map_io(void);
> @@ -54,10 +55,8 @@ static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
>
> #ifdef CONFIG_PXA3xx
> extern unsigned pxa3xx_get_clk_frequency_khz(int);
> -extern void pxa3xx_clear_reset_status(unsigned int);
> #else
> #define pxa3xx_get_clk_frequency_khz(x) (0)
> -static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
> #endif
>
> extern struct sysdev_class pxa_irq_sysclass;
> diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
> index e480d1e..6957ba5 100644
> --- a/arch/arm/mach-pxa/include/mach/hardware.h
> +++ b/arch/arm/mach-pxa/include/mach/hardware.h
> @@ -195,14 +195,15 @@
> #define __cpu_is_pxa935(id) (0)
> #endif
>
> -#ifdef CONFIG_CPU_PXA950
> -#define __cpu_is_pxa950(id) \
> - ({ \
> +#ifdef CONFIG_CPU_PXA955
> +#define __cpu_is_pxa955(id) \
> + ({ \
> unsigned int _id = (id) >> 4 & 0xfff; \
> - _id == 0x697; \
> - })
> + _id == 0x581 || _id == 0xc08 \
> + || _id == 0xb76; \
> + })
> #else
> -#define __cpu_is_pxa950(id) (0)
> +#define __cpu_is_pxa955(id) (0)
> #endif
>
> #define cpu_is_pxa210() \
> @@ -255,10 +256,10 @@
> __cpu_is_pxa935(read_cpuid_id()); \
> })
>
> -#define cpu_is_pxa950() \
> +#define cpu_is_pxa955() \
> ({ \
> - __cpu_is_pxa950(read_cpuid_id()); \
> - })
> + __cpu_is_pxa955(read_cpuid_id()); \
> + })
>
>
> /*
> @@ -297,6 +298,15 @@
> #define __cpu_is_pxa93x(id) (0)
> #endif
>
> +#ifdef CONFIG_PXA95x
> +#define __cpu_is_pxa95x(id) \
> + ({ \
> + __cpu_is_pxa955(id); \
> + })
> +#else
> +#define __cpu_is_pxa95x(id) (0)
> +#endif
> +
> #define cpu_is_pxa2xx() \
> ({ \
> __cpu_is_pxa2xx(read_cpuid_id()); \
> @@ -311,6 +321,12 @@
> ({ \
> __cpu_is_pxa93x(read_cpuid_id()); \
> })
> +
> +#define cpu_is_pxa95x() \
> + ({ \
> + __cpu_is_pxa95x(read_cpuid_id()); \
> + })
> +
> /*
> * return current memory and LCD clock frequency in units of 10kHz
> */
> diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
> index cb7ee26..a4285fc 100644
> --- a/arch/arm/mach-pxa/include/mach/irqs.h
> +++ b/arch/arm/mach-pxa/include/mach/irqs.h
> @@ -84,6 +84,7 @@
> #define IRQ_PXA935_MMC0 PXA_IRQ(72) /* MMC0 Controller (PXA935) */
> #define IRQ_PXA935_MMC1 PXA_IRQ(73) /* MMC1 Controller (PXA935) */
> #define IRQ_PXA935_MMC2 PXA_IRQ(74) /* MMC2 Controller (PXA935) */
> +#define IRQ_PXA955_MMC3 PXA_IRQ(75) /* MMC3 Controller (PXA955) */
> #define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */
>
> #define PXA_GPIO_IRQ_BASE PXA_IRQ(96)
> diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
> index 5a0a882..6f3329e 100644
> --- a/arch/arm/mach-pxa/pxa3xx.c
> +++ b/arch/arm/mach-pxa/pxa3xx.c
> @@ -41,12 +41,6 @@
> #define PECR_IE(n) ((1 << ((n) * 2)) << 28)
> #define PECR_IS(n) ((1 << ((n) * 2)) << 29)
>
> -void pxa3xx_clear_reset_status(unsigned int mask)
> -{
> - /* RESET_STATUS_* has a 1:1 mapping with ARSR */
> - ARSR = mask;
> -}
> -
> static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
> static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
> static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
> diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
> index 7d29dd3..8aeacf9 100644
> --- a/arch/arm/mach-pxa/pxa930.c
> +++ b/arch/arm/mach-pxa/pxa930.c
> @@ -192,7 +192,7 @@ static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
>
> static int __init pxa930_init(void)
> {
> - if (cpu_is_pxa930() || cpu_is_pxa935() || cpu_is_pxa950()) {
> + if (cpu_is_pxa93x()) {
> mfp_init_base(io_p2v(MFPR_BASE));
> mfp_init_addr(pxa930_mfp_addr_map);
> }
> diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
> new file mode 100644
> index 0000000..437980f
> --- /dev/null
> +++ b/arch/arm/mach-pxa/pxa95x.c
> @@ -0,0 +1,308 @@
> +/*
> + * linux/arch/arm/mach-pxa/pxa95x.c
> + *
> + * code specific to PXA95x aka MGx
> + *
> + * Copyright (C) 2009-2010 Marvell International Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/pm.h>
> +#include <linux/platform_device.h>
> +#include <linux/irq.h>
> +#include <linux/io.h>
> +#include <linux/sysdev.h>
> +
> +#include <mach/hardware.h>
> +#include <mach/gpio.h>
> +#include <mach/pxa3xx-regs.h>
> +#include <mach/pxa930.h>
> +#include <mach/reset.h>
> +#include <mach/pm.h>
> +#include <mach/dma.h>
> +#include <mach/regs-intc.h>
> +#include <plat/i2c.h>
> +
> +#include "generic.h"
> +#include "devices.h"
> +#include "clock.h"
> +
> +static struct mfp_addr_map pxa95x_mfp_addr_map[] __initdata = {
> +
> + MFP_ADDR(GPIO0, 0x02e0),
> + MFP_ADDR(GPIO1, 0x02dc),
> + MFP_ADDR(GPIO2, 0x02e8),
> + MFP_ADDR(GPIO3, 0x02d8),
> + MFP_ADDR(GPIO4, 0x02e4),
> + MFP_ADDR(GPIO5, 0x02ec),
> + MFP_ADDR(GPIO6, 0x02f8),
> + MFP_ADDR(GPIO7, 0x02fc),
> + MFP_ADDR(GPIO8, 0x0300),
> + MFP_ADDR(GPIO9, 0x02d4),
> + MFP_ADDR(GPIO10, 0x02f4),
> + MFP_ADDR(GPIO11, 0x02f0),
> + MFP_ADDR(GPIO12, 0x0304),
> + MFP_ADDR(GPIO13, 0x0310),
> + MFP_ADDR(GPIO14, 0x0308),
> + MFP_ADDR(GPIO15, 0x030c),
> + MFP_ADDR(GPIO16, 0x04e8),
> + MFP_ADDR(GPIO17, 0x04f4),
> + MFP_ADDR(GPIO18, 0x04f8),
> + MFP_ADDR(GPIO19, 0x04fc),
> + MFP_ADDR(GPIO20, 0x0518),
> + MFP_ADDR(GPIO21, 0x051c),
> + MFP_ADDR(GPIO22, 0x04ec),
> + MFP_ADDR(GPIO23, 0x0500),
> + MFP_ADDR(GPIO24, 0x04f0),
> + MFP_ADDR(GPIO25, 0x0504),
> + MFP_ADDR(GPIO26, 0x0510),
> + MFP_ADDR(GPIO27, 0x0514),
> + MFP_ADDR(GPIO28, 0x0520),
> + MFP_ADDR(GPIO29, 0x0600),
> + MFP_ADDR(GPIO30, 0x0618),
> + MFP_ADDR(GPIO31, 0x0610),
> + MFP_ADDR(GPIO32, 0x060c),
> + MFP_ADDR(GPIO33, 0x061c),
> + MFP_ADDR(GPIO34, 0x0620),
> + MFP_ADDR(GPIO35, 0x0628),
> + MFP_ADDR(GPIO36, 0x062c),
> + MFP_ADDR(GPIO37, 0x0630),
> + MFP_ADDR(GPIO38, 0x0634),
> + MFP_ADDR(GPIO39, 0x0638),
> + MFP_ADDR(GPIO40, 0x063c),
> + MFP_ADDR(GPIO41, 0x0614),
> + MFP_ADDR(GPIO42, 0x0624),
> + MFP_ADDR(GPIO43, 0x0608),
> + MFP_ADDR(GPIO44, 0x0604),
> + MFP_ADDR(GPIO45, 0x050c),
> + MFP_ADDR(GPIO46, 0x0508),
> + MFP_ADDR(GPIO47, 0x02bc),
> + MFP_ADDR(GPIO48, 0x02b4),
> + MFP_ADDR(GPIO49, 0x02b8),
> + MFP_ADDR(GPIO50, 0x02c8),
> + MFP_ADDR(GPIO51, 0x02c0),
> + MFP_ADDR(GPIO52, 0x02c4),
> + MFP_ADDR(GPIO53, 0x02d0),
> + MFP_ADDR(GPIO54, 0x02cc),
> + MFP_ADDR(GPIO55, 0x029c),
> + MFP_ADDR(GPIO56, 0x02a0),
> + MFP_ADDR(GPIO57, 0x0294),
> + MFP_ADDR(GPIO58, 0x0298),
> + MFP_ADDR(GPIO59, 0x02a4),
> + MFP_ADDR(GPIO60, 0x02a8),
> + MFP_ADDR(GPIO61, 0x02b0),
> + MFP_ADDR(GPIO62, 0x02ac),
> + MFP_ADDR(GPIO63, 0x0640),
> + MFP_ADDR(GPIO64, 0x065c),
> + MFP_ADDR(GPIO65, 0x0648),
> + MFP_ADDR(GPIO66, 0x0644),
> + MFP_ADDR(GPIO67, 0x0674),
> + MFP_ADDR(GPIO68, 0x0658),
> + MFP_ADDR(GPIO69, 0x0654),
> + MFP_ADDR(GPIO70, 0x0660),
> + MFP_ADDR(GPIO71, 0x0668),
> + MFP_ADDR(GPIO72, 0x0664),
> + MFP_ADDR(GPIO73, 0x0650),
> + MFP_ADDR(GPIO74, 0x066c),
> + MFP_ADDR(GPIO75, 0x064c),
> + MFP_ADDR(GPIO76, 0x0670),
> + MFP_ADDR(GPIO77, 0x0678),
> + MFP_ADDR(GPIO78, 0x067c),
> + MFP_ADDR(GPIO79, 0x0694),
> + MFP_ADDR(GPIO80, 0x069c),
> + MFP_ADDR(GPIO81, 0x06a0),
> + MFP_ADDR(GPIO82, 0x06a4),
> + MFP_ADDR(GPIO83, 0x0698),
> + MFP_ADDR(GPIO84, 0x06bc),
> + MFP_ADDR(GPIO85, 0x06b4),
> + MFP_ADDR(GPIO86, 0x06b0),
> + MFP_ADDR(GPIO87, 0x06c0),
> + MFP_ADDR(GPIO88, 0x06c4),
> + MFP_ADDR(GPIO89, 0x06ac),
> + MFP_ADDR(GPIO90, 0x0680),
> + MFP_ADDR(GPIO91, 0x0684),
> + MFP_ADDR(GPIO92, 0x0688),
> + MFP_ADDR(GPIO93, 0x0690),
> + MFP_ADDR(GPIO94, 0x068c),
> + MFP_ADDR(GPIO95, 0x06a8),
> + MFP_ADDR(GPIO96, 0x06b8),
> + MFP_ADDR(GPIO97, 0x0410),
> + MFP_ADDR(GPIO98, 0x0418),
> + MFP_ADDR(GPIO99, 0x041c),
> + MFP_ADDR(GPIO100, 0x0414),
> + MFP_ADDR(GPIO101, 0x0408),
> + MFP_ADDR(GPIO102, 0x0324),
> + MFP_ADDR(GPIO103, 0x040c),
> + MFP_ADDR(GPIO104, 0x0400),
> + MFP_ADDR(GPIO105, 0x0328),
> + MFP_ADDR(GPIO106, 0x0404),
> +
> + MFP_ADDR(GPIO159, 0x0524),
> + MFP_ADDR(GPIO163, 0x0534),
> + MFP_ADDR(GPIO167, 0x0544),
> + MFP_ADDR(GPIO168, 0x0548),
> + MFP_ADDR(GPIO169, 0x054c),
> + MFP_ADDR(GPIO170, 0x0550),
> + MFP_ADDR(GPIO171, 0x0554),
> + MFP_ADDR(GPIO172, 0x0558),
> + MFP_ADDR(GPIO173, 0x055c),
> +
> + MFP_ADDR(nXCVREN, 0x0204),
> + MFP_ADDR(DF_CLE_nOE, 0x020c),
> + MFP_ADDR(DF_nADV1_ALE, 0x0218),
> + MFP_ADDR(DF_SCLK_E, 0x0214),
> + MFP_ADDR(DF_SCLK_S, 0x0210),
> + MFP_ADDR(nBE0, 0x021c),
> + MFP_ADDR(nBE1, 0x0220),
> + MFP_ADDR(DF_nADV2_ALE, 0x0224),
> + MFP_ADDR(DF_INT_RnB, 0x0228),
> + MFP_ADDR(DF_nCS0, 0x022c),
> + MFP_ADDR(DF_nCS1, 0x0230),
> + MFP_ADDR(nLUA, 0x0254),
> + MFP_ADDR(nLLA, 0x0258),
> + MFP_ADDR(DF_nWE, 0x0234),
> + MFP_ADDR(DF_nRE_nOE, 0x0238),
> + MFP_ADDR(DF_ADDR0, 0x024c),
> + MFP_ADDR(DF_ADDR1, 0x0250),
> + MFP_ADDR(DF_ADDR2, 0x025c),
> + MFP_ADDR(DF_ADDR3, 0x0260),
> + MFP_ADDR(DF_IO0, 0x023c),
> + MFP_ADDR(DF_IO1, 0x0240),
> + MFP_ADDR(DF_IO2, 0x0244),
> + MFP_ADDR(DF_IO3, 0x0248),
> + MFP_ADDR(DF_IO4, 0x0264),
> + MFP_ADDR(DF_IO5, 0x0268),
> + MFP_ADDR(DF_IO6, 0x026c),
> + MFP_ADDR(DF_IO7, 0x0270),
> + MFP_ADDR(DF_IO8, 0x0274),
> + MFP_ADDR(DF_IO9, 0x0278),
> + MFP_ADDR(DF_IO10, 0x027c),
> + MFP_ADDR(DF_IO11, 0x0280),
> + MFP_ADDR(DF_IO12, 0x0284),
> + MFP_ADDR(DF_IO13, 0x0288),
> + MFP_ADDR(DF_IO14, 0x028c),
> + MFP_ADDR(DF_IO15, 0x0290),
> +
> + MFP_ADDR(GSIM_UIO, 0x0314),
> + MFP_ADDR(GSIM_UCLK, 0x0318),
> + MFP_ADDR(GSIM_UDET, 0x031c),
> + MFP_ADDR(GSIM_nURST, 0x0320),
> +
> + MFP_ADDR(PMIC_INT, 0x06c8),
> +
> + MFP_ADDR(RDY, 0x0200),
> +
> + MFP_ADDR_END,
> +};
> +
> +static DEFINE_CK(pxa95x_lcd, LCD, &clk_pxa3xx_hsio_ops);
> +static DEFINE_CLK(pxa95x_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
> +static DEFINE_PXA3_CKEN(pxa95x_ffuart, FFUART, 14857000, 1);
> +static DEFINE_PXA3_CKEN(pxa95x_btuart, BTUART, 14857000, 1);
> +static DEFINE_PXA3_CKEN(pxa95x_stuart, STUART, 14857000, 1);
> +static DEFINE_PXA3_CKEN(pxa95x_i2c, I2C, 32842000, 0);
> +static DEFINE_PXA3_CKEN(pxa95x_keypad, KEYPAD, 32768, 0);
> +static DEFINE_PXA3_CKEN(pxa95x_ssp1, SSP1, 13000000, 0);
> +static DEFINE_PXA3_CKEN(pxa95x_ssp2, SSP2, 13000000, 0);
> +static DEFINE_PXA3_CKEN(pxa95x_ssp3, SSP3, 13000000, 0);
> +static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0);
> +static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0);
> +static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0);
> +
> +static struct clk_lookup pxa95x_clkregs[] = {
> + INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
> + /* Power I2C clock is always on */
> + INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
> + INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL),
> + INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL),
> + INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL),
> + INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-uart.2", NULL),
> + INIT_CLKREG(&clk_pxa95x_stuart, "pxa2xx-ir", "UARTCLK"),
> + INIT_CLKREG(&clk_pxa95x_i2c, "pxa2xx-i2c.0", NULL),
> + INIT_CLKREG(&clk_pxa95x_keypad, "pxa27x-keypad", NULL),
> + INIT_CLKREG(&clk_pxa95x_ssp1, "pxa27x-ssp.0", NULL),
> + INIT_CLKREG(&clk_pxa95x_ssp2, "pxa27x-ssp.1", NULL),
> + INIT_CLKREG(&clk_pxa95x_ssp3, "pxa27x-ssp.2", NULL),
> + INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL),
> + INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
> + INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
> +};
> +
> +void __init pxa95x_init_irq(void)
> +{
> + pxa_init_irq(96, NULL);
> + pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
> +}
> +
> +/*
> + * device registration specific to PXA93x.
> + */
> +
> +void __init pxa95x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
> +{
> + pxa_register_device(&pxa3xx_device_i2c_power, info);
> +}
> +
> +static struct platform_device *devices[] __initdata = {
> + &sa1100_device_rtc,
> + &pxa_device_rtc,
> + &pxa27x_device_ssp1,
> + &pxa27x_device_ssp2,
> + &pxa27x_device_ssp3,
> + &pxa3xx_device_ssp4,
> + &pxa27x_device_pwm0,
> + &pxa27x_device_pwm1,
> +};
> +
> +static struct sys_device pxa95x_sysdev[] = {
> + {
> + .cls = &pxa_irq_sysclass,
> + }, {
> + .cls = &pxa_gpio_sysclass,
> + }, {
> + .cls = &pxa3xx_clock_sysclass,
> + }
> +};
> +
> +static int __init pxa95x_init(void)
> +{
> + int ret = 0, i;
> +
> + if (cpu_is_pxa95x()) {
> + mfp_init_base(io_p2v(MFPR_BASE));
> + mfp_init_addr(pxa95x_mfp_addr_map);
> +
> + reset_status = ARSR;
> +
> + /*
> + * clear RDH bit every time after reset
> + *
> + * Note: the last 3 bits DxS are write-1-to-clear so carefully
> + * preserve them here in case they will be referenced later
> + */
> + ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
> +
> + clkdev_add_table(pxa95x_clkregs, ARRAY_SIZE(pxa95x_clkregs));
> +
> + if ((ret = pxa_init_dma(IRQ_DMA, 32)))
> + return ret;
> +
> + for (i = 0; i < ARRAY_SIZE(pxa95x_sysdev); i++) {
> + ret = sysdev_register(&pxa95x_sysdev[i]);
> + if (ret)
> + pr_err("failed to register sysdev[%d]\n", i);
> + }
> +
> + ret = platform_add_devices(devices, ARRAY_SIZE(devices));
> + }
> +
> + return ret;
> +}
> +
> +postcore_initcall(pxa95x_init);
> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
> index 4414a01..ede1763 100644
> --- a/arch/arm/mm/Kconfig
> +++ b/arch/arm/mm/Kconfig
> @@ -382,6 +382,12 @@ config CPU_FEROCEON_OLD_ID
> for which the CPU ID is equal to the ARM926 ID.
> Relevant for Feroceon-1850 and early Feroceon-2850.
>
> +# Marvell PJ4
> +config CPU_PJ4
> + bool
> + select CPU_V7
> + select ARM_THUMBEE
> +
> # ARMv6
> config CPU_V6
> bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
> diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
> index 4aacdd1..3aca5ba 100644
> --- a/arch/arm/plat-pxa/Makefile
> +++ b/arch/arm/plat-pxa/Makefile
> @@ -6,6 +6,7 @@ obj-y := dma.o
>
> obj-$(CONFIG_GENERIC_GPIO) += gpio.o
> obj-$(CONFIG_PXA3xx) += mfp.o
> +obj-$(CONFIG_PXA95x) += mfp.o
> obj-$(CONFIG_ARCH_MMP) += mfp.o
>
> obj-$(CONFIG_HAVE_PWM) += pwm.o
> diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
> index 9e604c8..75f6564 100644
> --- a/arch/arm/plat-pxa/include/plat/mfp.h
> +++ b/arch/arm/plat-pxa/include/plat/mfp.h
> @@ -423,7 +423,7 @@ typedef unsigned long mfp_cfg_t;
> ((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
> (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
>
> -#if defined(CONFIG_PXA3xx) || defined(CONFIG_ARCH_MMP)
> +#if defined(CONFIG_PXA3xx) || defined(CONFIG_PXA95x) || defined(CONFIG_ARCH_MMP)
> /*
> * each MFP pin will have a MFPR register, since the offset of the
> * register varies between processors, the processor specific code
> @@ -470,6 +470,6 @@ void mfp_write(int mfp, unsigned long mfpr_val);
> void mfp_config(unsigned long *mfp_cfgs, int num);
> void mfp_config_run(void);
> void mfp_config_lpm(void);
> -#endif /* CONFIG_PXA3xx || CONFIG_ARCH_MMP */
> +#endif /* CONFIG_PXA3xx || CONFIG_PXA95x || CONFIG_ARCH_MMP */
>
> #endif /* __ASM_PLAT_MFP_H */
> --
> 1.5.6.5
>
>
More information about the linux-arm-kernel
mailing list