[PATCH 4/5] mx51: Add IOMUX definition for PWM output pin

[Fabio Estevam]

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
---
 arch/arm/plat-mxc/include/mach/iomux-mx51.h |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index e1600f3..fe249ad 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -379,6 +379,7 @@ typedef enum iomux_config {
 #define MX51_PAD_GPIO_1_2__GPIO_1_2        IOMUX_PAD(0x7D4, 0x3CC, 0, 0x0,   0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO_1_2__I2C2_SCL        IOMUX_PAD(0x7D4, 0x3CC, (2 | IOMUX_CONFIG_SION), \
                             0x9b8,   3, MX51_I2C_PAD_CTRL)
+#define MX51_PAD_GPIO_1_2__PWM1_PWMO        IOMUX_PAD(0x7D4, 0x3CC, 1, 0x0,   0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO_1_3__GPIO_1_3        IOMUX_PAD(0x7D8, 0x3D0, 0, 0x0,   0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO_1_3__I2C2_SDA        IOMUX_PAD(0x7D8, 0x3D0, (2 | IOMUX_CONFIG_SION), \
                             0x9bc,   3, MX51_I2C_PAD_CTRL)
-- 
1.6.0.4