[PATCH 27/51] ARM: imx: move registration of gpios to plat-mxc/gpio.c
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Wed Nov 17 16:29:55 EST 2010
This finally gets rid of mach-imx/devices.c.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
arch/arm/mach-imx/Makefile | 2 -
arch/arm/mach-imx/devices.c | 124 -------------------------------------------
arch/arm/plat-mxc/gpio.c | 59 ++++++++++++++++++++
3 files changed, 59 insertions(+), 126 deletions(-)
delete mode 100644 arch/arm/mach-imx/devices.c
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 5582692..d099c4a 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -4,8 +4,6 @@
# Object file lists.
-obj-y := devices.o
-
obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c
deleted file mode 100644
index cfc6891..0000000
--- a/arch/arm/mach-imx/devices.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * Author: MontaVista Software, Inc.
- * <source at mvista.com>
- *
- * Based on the OMAP devices.c
- *
- * 2005 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is
- * licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel at pengutronix.de
- * Copyright 2008 Sascha Hauer, kernel at pengutronix.de
- * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas at teltonika.lt>
- * Copyright (c) 2008 Darius Augulis <darius.augulis at teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial.h>
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/mmc.h>
-
-#if defined(CONFIG_ARCH_MX1)
-/* GPIO port description */
-static struct mxc_gpio_port imx_gpio_ports[] = {
- {
- .chip.label = "gpio-0",
- .base = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
- .irq = MX1_GPIO_INT_PORTA,
- .virtual_irq_start = MXC_GPIO_IRQ_START,
- }, {
- .chip.label = "gpio-1",
- .base = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
- .irq = MX1_GPIO_INT_PORTB,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 32,
- }, {
- .chip.label = "gpio-2",
- .base = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
- .irq = MX1_GPIO_INT_PORTC,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 64,
- }, {
- .chip.label = "gpio-3",
- .base = MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
- .irq = MX1_GPIO_INT_PORTD,
- .virtual_irq_start = MXC_GPIO_IRQ_START + 96,
- }
-};
-
-int __init imx1_register_gpios(void)
-{
- return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
-}
-#endif
-
-#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
-/* GPIO port description */
-#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq) \
- { \
- .chip.label = "gpio-" #n, \
- .irq = _irq, \
- .base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \
- n * 0x100), \
- .virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \
- }
-
-#define DEFINE_MXC_GPIO_PORT(SOC, n) \
- { \
- .chip.label = "gpio-" #n, \
- .base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \
- n * 0x100), \
- .virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \
- }
-
-#define DEFINE_MXC_GPIO_PORTS(SOC, pfx) \
- static struct mxc_gpio_port pfx ## _gpio_ports[] = { \
- DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO), \
- DEFINE_MXC_GPIO_PORT(SOC, 1), \
- DEFINE_MXC_GPIO_PORT(SOC, 2), \
- DEFINE_MXC_GPIO_PORT(SOC, 3), \
- DEFINE_MXC_GPIO_PORT(SOC, 4), \
- DEFINE_MXC_GPIO_PORT(SOC, 5), \
- }
-
-#ifdef CONFIG_MACH_MX21
-DEFINE_MXC_GPIO_PORTS(MX21, imx21);
-
-int __init imx21_register_gpios(void)
-{
- return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
-}
-#endif
-
-#ifdef CONFIG_MACH_MX27
-DEFINE_MXC_GPIO_PORTS(MX27, imx27);
-
-int __init imx27_register_gpios(void)
-{
- return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
-}
-#endif
-
-#endif
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index a43d9cc..2c00d9b 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -349,3 +349,62 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
return 0;
}
+
+#define DEFINE_IMX_GPIO_PORT_IRQ(soc, n, _irq) \
+ { \
+ .chip.label = "gpio-" #n, \
+ .irq = _irq, \
+ .base = soc ## _IO_ADDRESS(soc ## _GPIO_BASE_ADDR + \
+ (n) * SZ_256), \
+ .virtual_irq_start = MXC_GPIO_IRQ_START + (n) * 32, \
+ }
+
+#define DEFINE_IMX_GPIO_PORT(soc, n) \
+ DEFINE_IMX_GPIO_PORT_IRQ(soc, n, 0)
+
+#define DEFINE_REGISTER_FUNCTION(prefix) \
+int __init prefix ## _register_gpios(void) \
+{ \
+ return mxc_gpio_init(prefix ## _gpio_ports, \
+ ARRAY_SIZE(prefix ## _gpio_ports)); \
+}
+
+#if defined(CONFIG_SOC_IMX1)
+static struct mxc_gpio_port imx1_gpio_ports[] = {
+ DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, MX1_GPIO_INT_PORTA),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, MX1_GPIO_INT_PORTB),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, MX1_GPIO_INT_PORTC),
+ DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, MX1_GPIO_INT_PORTD),
+};
+
+DEFINE_REGISTER_FUNCTION(imx1)
+
+#endif /* if defined(CONFIG_SOC_IMX1) */
+
+#if defined(CONFIG_SOC_IMX21)
+static struct mxc_gpio_port imx21_gpio_ports[] = {
+ DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, MX21_INT_GPIO),
+ DEFINE_IMX_GPIO_PORT(MX21, 1),
+ DEFINE_IMX_GPIO_PORT(MX21, 2),
+ DEFINE_IMX_GPIO_PORT(MX21, 3),
+ DEFINE_IMX_GPIO_PORT(MX21, 4),
+ DEFINE_IMX_GPIO_PORT(MX21, 5),
+};
+
+DEFINE_REGISTER_FUNCTION(imx21)
+
+#endif /* if defined(CONFIG_SOC_IMX21) */
+
+#if defined(CONFIG_SOC_IMX27)
+static struct mxc_gpio_port imx27_gpio_ports[] = {
+ DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, MX27_INT_GPIO),
+ DEFINE_IMX_GPIO_PORT(MX27, 1),
+ DEFINE_IMX_GPIO_PORT(MX27, 2),
+ DEFINE_IMX_GPIO_PORT(MX27, 3),
+ DEFINE_IMX_GPIO_PORT(MX27, 4),
+ DEFINE_IMX_GPIO_PORT(MX27, 5),
+};
+
+DEFINE_REGISTER_FUNCTION(imx27)
+
+#endif /* if defined(CONFIG_SOC_IMX27) */
--
1.7.2.3
More information about the linux-arm-kernel
mailing list