[PATCH 26/51] ARM: imx: remove now empty devices.h
Uwe Kleine-König
u.kleine-koenig at pengutronix.de
Wed Nov 17 16:29:54 EST 2010
Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
arch/arm/mach-imx/devices.c | 2 --
arch/arm/mach-imx/eukrea_mbimx27-baseboard.c | 1 -
arch/arm/mach-imx/mach-cpuimx27.c | 1 -
arch/arm/mach-imx/mach-imx27_visstrim_m10.c | 1 -
arch/arm/mach-imx/mach-imx27lite.c | 1 -
arch/arm/mach-imx/mach-mx1ads.c | 1 -
arch/arm/mach-imx/mach-mx21ads.c | 1 -
arch/arm/mach-imx/mach-mx27_3ds.c | 1 -
arch/arm/mach-imx/mach-mx27ads.c | 1 -
arch/arm/mach-imx/mach-mxt_td60.c | 1 -
arch/arm/mach-imx/mach-pca100.c | 1 -
arch/arm/mach-imx/mach-pcm038.c | 1 -
arch/arm/mach-imx/mach-scb9328.c | 1 -
arch/arm/mach-imx/pcm970-baseboard.c | 1 -
14 files changed, 0 insertions(+), 15 deletions(-)
delete mode 100644 arch/arm/mach-imx/devices.h
diff --git a/arch/arm/mach-imx/devices.c b/arch/arm/mach-imx/devices.c
index 8fd2545..cfc6891 100644
--- a/arch/arm/mach-imx/devices.c
+++ b/arch/arm/mach-imx/devices.c
@@ -42,8 +42,6 @@
#include <mach/common.h>
#include <mach/mmc.h>
-#include "devices.h"
-
#if defined(CONFIG_ARCH_MX1)
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
diff --git a/arch/arm/mach-imx/devices.h b/arch/arm/mach-imx/devices.h
deleted file mode 100644
index e69de29..0000000
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 3aaa3b9..7dce251 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -36,7 +36,6 @@
#include <mach/audmux.h>
#include "devices-imx27.h"
-#include "devices.h"
static const int eukrea_mbimx27_pins[] __initconst = {
/* UART2 */
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 9ae5bed..6cf04da 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -42,7 +42,6 @@
#include <mach/ulpi.h>
#include "devices-imx27.h"
-#include "devices.h"
static const int eukrea_cpuimx27_pins[] __initconst = {
/* UART1 */
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index c9f12e4..40a3666 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -37,7 +37,6 @@
#include <mach/iomux.h>
#include "devices-imx27.h"
-#include "devices.h"
#define OTG_PHY_CS_GPIO (GPIO_PORTF + 17)
#define SDHC1_IRQ IRQ_GPIOB(25)
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index bbdbc75..3a1202e 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -25,7 +25,6 @@
#include <mach/iomux-mx27.h>
#include "devices-imx27.h"
-#include "devices.h"
static const int mx27lite_pins[] __initconst = {
/* UART1 */
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 6187ce9..1f446e5 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -30,7 +30,6 @@
#include <mach/irqs.h>
#include "devices-imx1.h"
-#include "devices.h"
static const int mx1ads_pins[] __initconst = {
/* UART1 */
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 83c064a..0a37257 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -28,7 +28,6 @@
#include <mach/mxc_nand.h>
#include "devices-imx21.h"
-#include "devices.h"
/*
* Memory-mapped I/O on MX21ADS base board
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 80399b2..3614e33 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -31,7 +31,6 @@
#include <mach/iomux-mx27.h>
#include "devices-imx27.h"
-#include "devices.h"
#define SD1_EN_GPIO (GPIO_PORTB + 25)
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 370481b..b832f96 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -32,7 +32,6 @@
#include <mach/mxc_nand.h>
#include "devices-imx27.h"
-#include "devices.h"
/*
* Base address of PBC controller, CS4
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index d1a3158..4ce71b0 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -33,7 +33,6 @@
#include <linux/i2c/pca953x.h>
#include "devices-imx27.h"
-#include "devices.h"
static const int mxt_td60_pins[] __initconst = {
/* UART0 */
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index d9e2dda..cccc0a0 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -42,7 +42,6 @@
#include <mach/ulpi.h>
#include "devices-imx27.h"
-#include "devices.h"
#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index e209b28..f667a26 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -40,7 +40,6 @@
#include <mach/ulpi.h>
#include "devices-imx27.h"
-#include "devices.h"
static const int pcm038_pins[] __initconst = {
/* UART1 */
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index 1fbdd3f..eae878f 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -25,7 +25,6 @@
#include <mach/iomux-mx1.h>
#include "devices-imx1.h"
-#include "devices.h"
/*
* This scb9328 has a 32MiB flash
diff --git a/arch/arm/mach-imx/pcm970-baseboard.c b/arch/arm/mach-imx/pcm970-baseboard.c
index 1297f1b..99afbc3 100644
--- a/arch/arm/mach-imx/pcm970-baseboard.c
+++ b/arch/arm/mach-imx/pcm970-baseboard.c
@@ -28,7 +28,6 @@
#include <mach/hardware.h>
#include "devices-imx27.h"
-#include "devices.h"
static const int pcm970_pins[] __initconst = {
/* SDHC */
--
1.7.2.3
More information about the linux-arm-kernel
mailing list