[PATCH] OMAP2: Devkit8000: Fix mmc regulator failure

[Tony Lindgren]

* Thomas Weber <weber at corscience.de> [101101 14:38]:
> This patch fixes the following error:
> 
> >regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal
> standby
> >twl_reg twl_reg.6: can't register VMMC1, -22
> >twl_reg: probe of twl_reg.6 failed with error -22

Adding this into omap-fixes.

Tony
 
> Signed-off-by: Thomas Weber <weber at corscience.de>
> ---
>  arch/arm/mach-omap2/board-devkit8000.c |    3 ---
>  1 files changed, 0 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
> index 067f437..53ac762 100644
> --- a/arch/arm/mach-omap2/board-devkit8000.c
> +++ b/arch/arm/mach-omap2/board-devkit8000.c
> @@ -242,9 +242,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
>  	mmc[0].gpio_cd = gpio + 0;
>  	omap2_hsmmc_init(mmc);
>  
> -	/* link regulators to MMC adapters */
> -	devkit8000_vmmc1_supply.dev = mmc[0].dev;
> -
>  	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
>  	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
>  
> -- 
> 1.7.3.2
>