[PATCH 0/3] USB: add support for CNS3XXX SOC's EHCI/OHCI controller

[mkl0301 at gmail.com]

From: Mac Lin <mkl0301 at gmail.com>

The first patch prepare the mach-cns3xxx power management code for drivers use.
The other two patches add the bus glue for EHCI/OHCI controller in mach-cns3xxx and usb.

This patchset is based on linux-2.6.37-rc2

Mac Lin (3):
      ARM: cns3xxx: Add new and export the old power management functions
      ARM: cns3xxx: Add architecture definition for EHCI/OHCI controller
      USB: cns3xxx: Add EHCI and OHCI bus glue for CNS3XXX SOCs

 arch/arm/mach-cns3xxx/cns3420vb.c            |   50 ++++++++
 arch/arm/mach-cns3xxx/core.h                 |    4 +-
 arch/arm/mach-cns3xxx/include/mach/cns3xxx.h |    2 -
 arch/arm/mach-cns3xxx/include/mach/pm.h      |   21 +++
 arch/arm/mach-cns3xxx/pm.c                   |   21 +++
 drivers/usb/Kconfig                          |    2 +
 drivers/usb/host/Kconfig                     |   15 +++
 drivers/usb/host/ehci-cns3xxx.c              |  176 ++++++++++++++++++++++++++
 drivers/usb/host/ehci-hcd.c                  |    5 +
 drivers/usb/host/ohci-cns3xxx.c              |  171 +++++++++++++++++++++++++
 drivers/usb/host/ohci-hcd.c                  |    5 +
 11 files changed, 468 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/mach-cns3xxx/include/mach/pm.h
 create mode 100644 drivers/usb/host/ehci-cns3xxx.c
 create mode 100644 drivers/usb/host/ohci-cns3xxx.c