[PATCH 6/8] ARM: pxa: auto compute shift and mult of timer

[Haojian Zhuang]

Use auto-computed shift and mult of timer with new API
clocksource_calc_mult_shift()/clockevents_calc_mult_shift().

Signed-off-by: Haojian Zhuang <haojian.zhuang at marvell.com>
Cc: Eric Miao <eric.y.miao at gmail.com>
Cc: Nicolas Pitre <nico at fluxnic.net>
---
 arch/arm/mach-pxa/time.c |    9 ++-------
 1 files changed, 2 insertions(+), 7 deletions(-)

diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 293e40a..dd96128 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -111,7 +111,6 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 static struct clock_event_device ckevt_pxa_osmr0 = {
 	.name		= "osmr0",
 	.features	= CLOCK_EVT_FEAT_ONESHOT,
-	.shift		= 32,
 	.rating		= 200,
 	.set_next_event	= pxa_osmr0_set_next_event,
 	.set_mode	= pxa_osmr0_set_mode,
@@ -127,7 +126,6 @@ static struct clocksource cksrc_pxa_oscr0 = {
 	.rating         = 200,
 	.read           = pxa_read_oscr,
 	.mask           = CLOCKSOURCE_MASK(32),
-	.shift          = 20,
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
@@ -147,17 +145,14 @@ static void __init pxa_timer_init(void)
 
 	set_oscr2ns_scale(clock_tick_rate);
 
-	ckevt_pxa_osmr0.mult =
-		div_sc(clock_tick_rate, NSEC_PER_SEC, ckevt_pxa_osmr0.shift);
+	clocksource_calc_mult_shift(&cksrc_pxa_oscr0, clock_tick_rate, 4);
+	clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
 	ckevt_pxa_osmr0.max_delta_ns =
 		clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
 	ckevt_pxa_osmr0.min_delta_ns =
 		clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1;
 	ckevt_pxa_osmr0.cpumask = cpumask_of(0);
 
-	cksrc_pxa_oscr0.mult =
-		clocksource_hz2mult(clock_tick_rate, cksrc_pxa_oscr0.shift);
-
 	setup_irq(IRQ_OST0, &pxa_ost0_irq);
 
 	clocksource_register(&cksrc_pxa_oscr0);
-- 
1.5.6.5