[PATCH 1/2] ARM: S3C2410: H1940: Adapt h1940-bluetooth to gpiolib changes

[Vasily Khoruzhick]

Replace in s3c_gpio_cfgpull with s3c_gpio_setpull.

Signed-off-by: Vasily Khoruzhick <anarsoul at gmail.com>
---
 arch/arm/mach-s3c2410/h1940-bluetooth.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 8aa2f19..6b86a72 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -77,13 +77,13 @@ static int __devinit h1940bt_probe(struct platform_device *pdev)
 
 	/* Configures BT serial port GPIOs */
 	s3c_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
-	s3c_gpio_cfgpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(0), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
-	s3c_gpio_cfgpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(1), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
-	s3c_gpio_cfgpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(2), S3C_GPIO_PULL_NONE);
 	s3c_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
-	s3c_gpio_cfgpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
+	s3c_gpio_setpull(S3C2410_GPH(3), S3C_GPIO_PULL_NONE);
 
 
 	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
-- 
1.7.3.2