[RFC PATCH 07/13] picoxcell: add common SoC devices

[Jamie Iles]

Add the devices common to all picoXcell variants (UART and PMU). Other
peripherals such as DMA, SPI, fuses and EMAC will be added later
with driver support.

Signed-off-by: Jamie Iles <jamie at jamieiles.com>
---
 arch/arm/mach-picoxcell/Makefile         |    3 +-
 arch/arm/mach-picoxcell/devices.c        |   77 ++++++++++++++++++++++++++++++
 arch/arm/mach-picoxcell/picoxcell_core.c |    3 +
 arch/arm/mach-picoxcell/picoxcell_core.h |    1 +
 4 files changed, 83 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-picoxcell/Makefile b/arch/arm/mach-picoxcell/Makefile
index 8d8b4e8..371698f 100644
--- a/arch/arm/mach-picoxcell/Makefile
+++ b/arch/arm/mach-picoxcell/Makefile
@@ -2,4 +2,5 @@ obj-y				:= picoxcell_core.o axi2cfg.o \
 				   time.o \
 				   mux.o \
 				   gpio.o \
-				   clk.o
+				   clk.o \
+				   devices.o
diff --git a/arch/arm/mach-picoxcell/devices.c b/arch/arm/mach-picoxcell/devices.c
new file mode 100644
index 0000000..6368b92
--- /dev/null
+++ b/arch/arm/mach-picoxcell/devices.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2010 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * All enquiries to support at picochip.com
+ */
+#include <linux/serial_8250.h>
+#include <linux/serial_reg.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+#include <asm/pmu.h>
+
+#include "picoxcell_core.h"
+
+#define UART_USR_REG_OFFSET			0x7C
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.membase	= iomem_ptr(PICOXCELL_UART1_BASE),
+		.mapbase	= PICOXCELL_UART1_BASE,
+		.irq		= IRQ_UART1,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_DWAPB32,
+		.regshift	= 2,
+		.uartclk	= PICOXCELL_BASE_BAUD,
+		.private_data	= (void *)(PHYS_TO_IO(PICOXCELL_UART1_BASE +
+						      UART_USR_REG_OFFSET)),
+	},
+	{
+		.membase	= iomem_ptr(PICOXCELL_UART2_BASE),
+		.mapbase	= PICOXCELL_UART2_BASE,
+		.irq		= IRQ_UART2,
+		.flags		= UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_DWAPB32,
+		.regshift	= 2,
+		.uartclk	= PICOXCELL_BASE_BAUD,
+		.private_data	= (void *)(PHYS_TO_IO(PICOXCELL_UART2_BASE +
+						      UART_USR_REG_OFFSET)),
+	},
+	{},
+};
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev.platform_data	= serial_platform_data,
+};
+
+static struct resource pmu_resource = {
+	.start			= IRQ_NPMUIRQ,
+	.end			= IRQ_NPMUIRQ,
+	.flags			= IORESOURCE_IRQ,
+};
+
+static struct platform_device pmu_device = {
+	.name			= "arm-pmu",
+	.id			= ARM_PMU_DEVICE_CPU,
+	.num_resources		= 1,
+	.resource		= &pmu_resource,
+};
+
+static struct __initdata platform_device *common_devices[] = {
+	&serial_device,
+	&pmu_device,
+};
+
+void __init picoxcell_add_devices(void)
+{
+	WARN_ON(platform_add_devices(common_devices,
+				     ARRAY_SIZE(common_devices)));
+}
diff --git a/arch/arm/mach-picoxcell/picoxcell_core.c b/arch/arm/mach-picoxcell/picoxcell_core.c
index 450b3fad..7c51e0f 100644
--- a/arch/arm/mach-picoxcell/picoxcell_core.c
+++ b/arch/arm/mach-picoxcell/picoxcell_core.c
@@ -297,4 +297,7 @@ void __init picoxcell_core_init(void)
 
 	/* Add handlers for the AXI bus snooping. */
 	picoxcell_axi_bus_error_init();
+
+	/* Register the devices. */
+	picoxcell_add_devices();
 }
diff --git a/arch/arm/mach-picoxcell/picoxcell_core.h b/arch/arm/mach-picoxcell/picoxcell_core.h
index 941d1a6..9647b7a 100644
--- a/arch/arm/mach-picoxcell/picoxcell_core.h
+++ b/arch/arm/mach-picoxcell/picoxcell_core.h
@@ -19,5 +19,6 @@ extern void __init picoxcell_core_init(void);
 extern void __init picoxcell_init_irq(void);
 extern void __init picoxcell_map_io(void);
 extern struct sys_timer picoxcell_sys_timer;
+extern void __init picoxcell_add_devices(void);
 
 #endif /* __ASM_ARCH_PICOXCELL_CORE_H__ */
-- 
1.7.2.3