[PATCH v6 11/12] davinci: add tnetv107x evm backlight device

[Cyril Chemparathy]

On 11/19/2010 11:44 AM, Sergei Shtylyov wrote:
> Hello.
> 
> Cyril Chemparathy wrote:
> 
>> The tnetv107x evm board has a backlight device that is connected on one of the
>> SSP ports.  This patch adds the board definitions necessary to plug the
>> backlight driver to the GPIO corresponding to this SSP pin.
> 
>> Signed-off-by: Cyril Chemparathy <cyril at ti.com>
>> ---
>>  arch/arm/mach-davinci/board-tnetv107x-evm.c |   14 ++++++++++++++
>>  1 files changed, 14 insertions(+), 0 deletions(-)
> 
>> diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
>> index e3863dd..ac62de2 100644
>> --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
>> +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
>> @@ -44,6 +44,7 @@
>>  #define EVM_MMC_WP_GPIO		21
>>  #define EVM_MMC_CD_GPIO		24
>>  #define EVM_SPI_CS_GPIO		54
>> +#define EVM_BACKLIGHT_GPIO	(SSP_GPIO_START + 2)
> 
>     Why it's not aligned with others?

It actually is aligned if you remove the leading space/+.

Regards
Cyril.