[PATCH] arm: Fix HAVE_S3C2410_WATCHDOG warnings

[Kukjin Kim]

Kyungmin Park wrote:
> 
> Fix build warnings
> warning: (ARCH_S3C64XX && <choice> && WATCHDOG || ARCH_S5P64X0 && <choice>
&&
> WATCHDOG || ARCH_S5P6442 && <choice> && WATCHDOG || ARCH_S5PC100 &&
<choice>
> || ARCH_S5PV210 && <choice> || ARCH_S5PV310 && <choice> || MACH_SMDK6410
&&
> ARCH_S3C64XX) selects HAVE_S3C2410_WATCHDOG which has unmet direct
> dependencies (WATCHDOG)
> 
> Signed-off-by: Kyungmin Park <kyungmin.park at samsung.com>
> ---
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index a19a526..a302713 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -677,7 +677,7 @@ config ARCH_S3C64XX
>  	select USB_ARCH_HAS_OHCI
>  	select SAMSUNG_GPIOLIB_4BIT
>  	select HAVE_S3C2410_I2C
> -	select HAVE_S3C2410_WATCHDOG
> +	select HAVE_S3C2410_WATCHDOG if WATCHDOG
>  	help
>  	  Samsung S3C64XX series based systems
> 
> @@ -686,7 +686,7 @@ config ARCH_S5P64X0
>  	select CPU_V6
>  	select GENERIC_GPIO
>  	select HAVE_CLK
> -	select HAVE_S3C2410_WATCHDOG
> +	select HAVE_S3C2410_WATCHDOG if WATCHDOG
>  	select ARCH_USES_GETTIMEOFFSET
>  	select HAVE_S3C2410_I2C
>  	select HAVE_S3C_RTC
> @@ -700,7 +700,7 @@ config ARCH_S5P6442
>  	select GENERIC_GPIO
>  	select HAVE_CLK
>  	select ARCH_USES_GETTIMEOFFSET
> -	select HAVE_S3C2410_WATCHDOG
> +	select HAVE_S3C2410_WATCHDOG if WATCHDOG
>  	help
>  	  Samsung S5P6442 CPU based systems
> 
> @@ -713,7 +713,7 @@ config ARCH_S5PC100
>  	select ARCH_USES_GETTIMEOFFSET
>  	select HAVE_S3C2410_I2C
>  	select HAVE_S3C_RTC
> -	select HAVE_S3C2410_WATCHDOG
> +	select HAVE_S3C2410_WATCHDOG if WATCHDOG
>  	help
>  	  Samsung S5PC100 series based systems
> 
> @@ -728,7 +728,7 @@ config ARCH_S5PV210
>  	select ARCH_USES_GETTIMEOFFSET
>  	select HAVE_S3C2410_I2C
>  	select HAVE_S3C_RTC
> -	select HAVE_S3C2410_WATCHDOG
> +	select HAVE_S3C2410_WATCHDOG if WATCHDOG
>  	help
>  	  Samsung S5PV210/S5PC110 series based systems
> 
> @@ -741,7 +741,7 @@ config ARCH_S5PV310
>  	select GENERIC_CLOCKEVENTS
>  	select HAVE_S3C_RTC
>  	select HAVE_S3C2410_I2C
> -	select HAVE_S3C2410_WATCHDOG
> +	select HAVE_S3C2410_WATCHDOG if WATCHDOG
>  	help
>  	  Samsung S5PV310 series based systems

Ok, will apply...
And will sort out other similar configure warning such as I2C and RTC.

As a note, in your patch, my e-mail address was wrong :-(

Anyway,
Thanks.

Have a nice weekend.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.