[PATCH v3 03/13] OMAP: DMA: Introduce DMA device attributes

[Kevin Hilman]

"G, Manjunath Kondaiah" <manjugk at ti.com> writes:

> This patch introduces OMAP DMA device attributes for using the same in
> DMA platform driver for all OMAP's and HWMOD database(OMAP2PLUS onwards)
>
> Signed-off-by: G, Manjunath Kondaiah <manjugk at ti.com>
> Cc: Benoit Cousson <b-cousson at ti.com>
> Cc: Kevin Hilman <khilman at deeprootsystems.com>
> Cc: Santosh Shilimkar <santosh.shilimkar at ti.com>
> ---
>  arch/arm/plat-omap/include/plat/dma.h |   20 ++++++++++++++++++++
>  1 files changed, 20 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
> index 5e28d26..9757b22 100644
> --- a/arch/arm/plat-omap/include/plat/dma.h
> +++ b/arch/arm/plat-omap/include/plat/dma.h
> @@ -296,6 +296,22 @@
>  #define DMA_ERRATA_i88			(1 << 4)
>  #define DMA_ERRATA_3_3			(1 << 5)
>  
> +/* Attributes for OMAP DMA Contrllers */
> +#define ENABLE_1510_MODE		(1 << 0x0)
> +#define DMA_LINKED_LCH			(1 << 0x1)
> +#define GLOBAL_PRIORITY			(1 << 0x2)
> +#define RESERVE_CHANNEL			(1 << 0x3)
> +#define SRC_PORT			(1 << 0x4)
> +#define DST_PORT			(1 << 0x5)
> +#define IS_CSSA_32			(1 << 0x6)
> +#define IS_CDSA_32			(1 << 0x7)
> +#define SRC_INDEX			(1 << 0x8)
> +#define DST_INDEX			(1 << 0x9)
> +#define IS_BURST_ONLY4			(1 << 0xA)
> +#define CLEAR_CSR_ON_READ		(1 << 0xB)
> +#define IS_WORD_16			(1 << 0xC)
> +#define IS_RW_PRIORITY			(1 << 0xD)

Please use BIT() for these.

>  enum omap_dma_burst_mode {
>  	OMAP_DMA_DATA_BURST_DIS = 0,
>  	OMAP_DMA_DATA_BURST_4,
> @@ -361,6 +377,10 @@ struct omap_dma_channel_params {
>  #endif
>  };
>  
> +struct omap_dma_dev_attr {
> +	u32 dev_caps;
> +	u16 lch_count;
> +};
>  
>  extern void omap_set_dma_priority(int lch, int dst_port, int priority);
>  extern int omap_request_dma(int dev_id, const char *dev_name,

Kevin