arm smp support patch

[Rob Herring]

On 11/10/2010 10:41 PM, George G. Davis wrote:
> On Tue, Nov 09, 2010 at 01:33:20PM -1000, Scott Valentine wrote:
>> On arm multi-core platforms that have a gic, the secondary cores fail to
>> wake if they are booted in WFI mode, as the gic_dist_init disables all
>> interrupts including IPI. I've included a simple patch to the
>> gic_dist_init function that enables interrupts 0-15 on SMP enabled
>> systems. This patch was made against linux-2.6-HEAD-151f52f.
>>
>>
>> diff -uNr a/arch/arm/common/gic.c b/arch/arm/common/gic.c
>> --- a/arch/arm/common/gic.c     2010-11-05 15:57:04.000000000 -1000
>> +++ b/arch/arm/common/gic.c     2010-11-09 13:08:33.000000000 -1000
>> @@ -262,6 +262,13 @@
>>          for (i = 0; i<  max_irq; i += 32)
>>                  writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 /
>> 32);
>>
>> +#ifdef CONFIG_SMP
>> +       /*
>> +        * Enable IPI interrupts on SMP systems so we can wake secondary
>> cores
>> +        */
>> +       writel(0x0000ffff, base + GIC_DIST_ENABLE_SET);
>
> The ARM11 MPCore TRM [1] states "Interrupts 0-15 fields are read as one,
> that is, always enabled, and write to these fields have no effect."  So
> it seems odd that this is needed.  Errata?  FWIW, I've peeked and poked
> at GIC_DIST_ENABLE_SET and GIC_DIST_ENABLE_CLEAR via a debugger and the
> 16 LSBs of both of these registers are stuck-at-one on my ARM11 MPCore
> r1p0.
>
The GIC arch spec states these bits are implementation defined. However, 
this register is also banked for SMP. So you cannot enable the interrupt 
for other cores from the primary core.

Rob