[PATCH v3 2/2] msm: gpio: Add irq support to v2 gpiolib.
Gregory Bean
gbean at codeaurora.org
Tue Nov 16 16:38:36 EST 2010
Complete the MSM v2 gpio subsystem by adding irq_chip.
Signed-off-by: Gregory Bean <gbean at codeaurora.org>
---
arch/arm/mach-msm/gpio-v2.c | 344 ++++++++++++++++++++++++++++++++++++++++---
1 files changed, 326 insertions(+), 18 deletions(-)
diff --git a/arch/arm/mach-msm/gpio-v2.c b/arch/arm/mach-msm/gpio-v2.c
index 15b19bd..aa3e9ec 100644
--- a/arch/arm/mach-msm/gpio-v2.c
+++ b/arch/arm/mach-msm/gpio-v2.c
@@ -15,7 +15,11 @@
* 02110-1301, USA.
*
*/
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/module.h>
@@ -31,17 +35,97 @@ enum {
GPIO_OUT_BIT = 1
};
+/* Bits of interest in the GPIO_INTR_STATUS register.
+ */
+enum {
+ INTR_STATUS_BIT = 0,
+};
+
/* Bits of interest in the GPIO_CFG register.
*/
enum {
GPIO_OE_BIT = 9,
};
+/* Bits of interest in the GPIO_INTR_CFG register.
+ */
+enum {
+ INTR_ENABLE_BIT = 0,
+ INTR_POL_CTL_BIT = 1,
+ INTR_DECT_CTL_BIT = 2,
+ INTR_RAW_STATUS_EN_BIT = 3,
+};
+
+/* Codes of interest in GPIO_INTR_CFG_SU.
+ */
+enum {
+ TARGET_PROC_SCORPION = 4,
+ TARGET_PROC_NONE = 7,
+};
+
+/*
+ * When a GPIO triggers, two separate decisions are made, controlled
+ * by two separate flags.
+ *
+ * - First, INTR_RAW_STATUS_EN controls whether or not the GPIO_INTR_STATUS
+ * register for that GPIO will be updated to reflect the triggering of that
+ * gpio. If this bit is 0, this register will not be updated.
+ * - Second, INTR_ENABLE controls whether an interrupt is triggered.
+ *
+ * If INTR_ENABLE is set and INTR_RAW_STATUS_EN is NOT set, an interrupt
+ * can be triggered but the status register will not reflect it.
+ */
+#define INTR_RAW_STATUS_EN BIT(INTR_RAW_STATUS_EN_BIT)
+#define INTR_ENABLE BIT(INTR_ENABLE_BIT)
+#define INTR_DECT_CTL_EDGE BIT(INTR_DECT_CTL_BIT)
+#define INTR_POL_CTL_HI BIT(INTR_POL_CTL_BIT)
+
+#define GPIO_INTR_CFG_SU(gpio) (MSM_TLMM_BASE + 0x0400 + (0x04 * (gpio)))
#define GPIO_CONFIG(gpio) (MSM_TLMM_BASE + 0x1000 + (0x10 * (gpio)))
#define GPIO_IN_OUT(gpio) (MSM_TLMM_BASE + 0x1004 + (0x10 * (gpio)))
+#define GPIO_INTR_CFG(gpio) (MSM_TLMM_BASE + 0x1008 + (0x10 * (gpio)))
+#define GPIO_INTR_STATUS(gpio) (MSM_TLMM_BASE + 0x100c + (0x10 * (gpio)))
+
+/**
+ * struct msm_gpio_dev: the MSM8660 SoC GPIO device structure
+ *
+ * @enabled_irqs: a bitmap used to optimize the summary-irq handler. By
+ * keeping track of which gpios are unmasked as irq sources, we avoid
+ * having to do readl calls on hundreds of iomapped registers each time
+ * the summary interrupt fires in order to locate the active interrupts.
+ *
+ * @wake_irqs: a bitmap for tracking which interrupt lines are enabled
+ * as wakeup sources. When the device is suspended, interrupts which are
+ * not wakeup sources are disabled.
+ *
+ * @dual_edge_irqs: a bitmap used to track which irqs are configured
+ * as dual-edge, as this is not supported by the hardware and requires
+ * some special handling in the driver.
+ */
+struct msm_gpio_dev {
+ struct gpio_chip gpio_chip;
+ DECLARE_BITMAP(enabled_irqs, NR_GPIO_IRQS);
+ DECLARE_BITMAP(wake_irqs, NR_GPIO_IRQS);
+ DECLARE_BITMAP(dual_edge_irqs, NR_GPIO_IRQS);
+};
static DEFINE_SPINLOCK(tlmm_lock);
+static inline struct msm_gpio_dev *to_msm_gpio_dev(struct gpio_chip *chip)
+{
+ return container_of(chip, struct msm_gpio_dev, gpio_chip);
+}
+
+static inline void set_gpio_bits(unsigned n, void __iomem *reg)
+{
+ writel(readl(reg) | n, reg);
+}
+
+static inline void clr_gpio_bits(unsigned n, void __iomem *reg)
+{
+ writel(readl(reg) & ~n, reg);
+}
+
static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
{
return readl(GPIO_IN_OUT(offset)) & BIT(GPIO_IN_BIT);
@@ -57,8 +141,7 @@ static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
unsigned long irq_flags;
spin_lock_irqsave(&tlmm_lock, irq_flags);
- writel(readl(GPIO_CONFIG(offset)) & ~BIT(GPIO_OE_BIT),
- GPIO_CONFIG(offset));
+ clr_gpio_bits(BIT(GPIO_OE_BIT), GPIO_CONFIG(offset));
spin_unlock_irqrestore(&tlmm_lock, irq_flags);
return 0;
}
@@ -71,8 +154,7 @@ static int msm_gpio_direction_output(struct gpio_chip *chip,
spin_lock_irqsave(&tlmm_lock, irq_flags);
msm_gpio_set(chip, offset, val);
- writel(readl(GPIO_CONFIG(offset)) | BIT(GPIO_OE_BIT),
- GPIO_CONFIG(offset));
+ set_gpio_bits(BIT(GPIO_OE_BIT), GPIO_CONFIG(offset));
spin_unlock_irqrestore(&tlmm_lock, irq_flags);
return 0;
}
@@ -87,31 +169,216 @@ static void msm_gpio_free(struct gpio_chip *chip, unsigned offset)
msm_gpiomux_put(chip->base + offset);
}
-static struct gpio_chip msm_gpio = {
- .base = 0,
- .ngpio = NR_GPIO_IRQS,
- .direction_input = msm_gpio_direction_input,
- .direction_output = msm_gpio_direction_output,
- .get = msm_gpio_get,
- .set = msm_gpio_set,
- .request = msm_gpio_request,
- .free = msm_gpio_free,
+static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ return MSM_GPIO_TO_INT(offset - chip->base);
+}
+
+static inline int msm_irq_to_gpio(struct gpio_chip *chip, unsigned irq)
+{
+ return irq - MSM_GPIO_TO_INT(chip->base);
+}
+
+static struct msm_gpio_dev msm_gpio = {
+ .gpio_chip = {
+ .base = 0,
+ .ngpio = NR_GPIO_IRQS,
+ .direction_input = msm_gpio_direction_input,
+ .direction_output = msm_gpio_direction_output,
+ .get = msm_gpio_get,
+ .set = msm_gpio_set,
+ .to_irq = msm_gpio_to_irq,
+ .request = msm_gpio_request,
+ .free = msm_gpio_free,
+ },
+};
+
+/* For dual-edge interrupts in software, since the hardware has no
+ * such support:
+ *
+ * At appropriate moments, this function may be called to flip the polarity
+ * settings of both-edge irq lines to try and catch the next edge.
+ *
+ * The attempt is considered successful if:
+ * - the status bit goes high, indicating that an edge was caught, or
+ * - the input value of the gpio doesn't change during the attempt.
+ * If the value changes twice during the process, that would cause the first
+ * test to fail but would force the second, as two opposite
+ * transitions would cause a detection no matter the polarity setting.
+ *
+ * The do-loop tries to sledge-hammer closed the timing hole between
+ * the initial value-read and the polarity-write - if the line value changes
+ * during that window, an interrupt is lost, the new polarity setting is
+ * incorrect, and the first success test will fail, causing a retry.
+ *
+ * Algorithm comes from Google's msmgpio driver, see mach-msm/gpio.c.
+ */
+static void msm_gpio_update_dual_edge_pos(unsigned gpio)
+{
+ int loop_limit = 100;
+ unsigned val, val2, intstat;
+
+ do {
+ val = readl(GPIO_IN_OUT(gpio)) & BIT(GPIO_IN_BIT);
+ if (val)
+ clr_gpio_bits(INTR_POL_CTL_HI, GPIO_INTR_CFG(gpio));
+ else
+ set_gpio_bits(INTR_POL_CTL_HI, GPIO_INTR_CFG(gpio));
+ val2 = readl(GPIO_IN_OUT(gpio)) & BIT(GPIO_IN_BIT);
+ intstat = readl(GPIO_INTR_STATUS(gpio)) & BIT(INTR_STATUS_BIT);
+ if (intstat || val == val2)
+ return;
+ } while (loop_limit-- > 0);
+ pr_err("%s: dual-edge irq failed to stabilize, "
+ "interrupts dropped. %#08x != %#08x\n",
+ __func__, val, val2);
+}
+
+static void msm_gpio_irq_ack(unsigned int irq)
+{
+ int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq);
+
+ writel(BIT(INTR_STATUS_BIT), GPIO_INTR_STATUS(gpio));
+ if (test_bit(gpio, msm_gpio.dual_edge_irqs))
+ msm_gpio_update_dual_edge_pos(gpio);
+}
+
+static void msm_gpio_irq_mask(unsigned int irq)
+{
+ int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq);
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&tlmm_lock, irq_flags);
+ writel(TARGET_PROC_NONE, GPIO_INTR_CFG_SU(gpio));
+ clr_gpio_bits(INTR_RAW_STATUS_EN | INTR_ENABLE, GPIO_INTR_CFG(gpio));
+ __clear_bit(gpio, msm_gpio.enabled_irqs);
+ spin_unlock_irqrestore(&tlmm_lock, irq_flags);
+}
+
+static void msm_gpio_irq_unmask(unsigned int irq)
+{
+ int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq);
+ unsigned long irq_flags;
+
+ spin_lock_irqsave(&tlmm_lock, irq_flags);
+ __set_bit(gpio, msm_gpio.enabled_irqs);
+ set_gpio_bits(INTR_RAW_STATUS_EN | INTR_ENABLE, GPIO_INTR_CFG(gpio));
+ writel(TARGET_PROC_SCORPION, GPIO_INTR_CFG_SU(gpio));
+ spin_unlock_irqrestore(&tlmm_lock, irq_flags);
+}
+
+static int msm_gpio_irq_set_type(unsigned int irq, unsigned int flow_type)
+{
+ int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq);
+ unsigned long irq_flags;
+ uint32_t bits;
+
+ spin_lock_irqsave(&tlmm_lock, irq_flags);
+
+ bits = readl(GPIO_INTR_CFG(gpio));
+
+ if (flow_type & IRQ_TYPE_EDGE_BOTH) {
+ bits |= INTR_DECT_CTL_EDGE;
+ irq_desc[irq].handle_irq = handle_edge_irq;
+ if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
+ __set_bit(gpio, msm_gpio.dual_edge_irqs);
+ else
+ __clear_bit(gpio, msm_gpio.dual_edge_irqs);
+ } else {
+ bits &= ~INTR_DECT_CTL_EDGE;
+ irq_desc[irq].handle_irq = handle_level_irq;
+ __clear_bit(gpio, msm_gpio.dual_edge_irqs);
+ }
+
+ if (flow_type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH))
+ bits |= INTR_POL_CTL_HI;
+ else
+ bits &= ~INTR_POL_CTL_HI;
+
+ writel(bits, GPIO_INTR_CFG(gpio));
+
+ if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH)
+ msm_gpio_update_dual_edge_pos(gpio);
+
+ spin_unlock_irqrestore(&tlmm_lock, irq_flags);
+
+ return 0;
+}
+
+/*
+ * When the summary IRQ is raised, any number of GPIO lines may be high.
+ * It is the job of the summary handler to find all those GPIO lines
+ * which have been set as summary IRQ lines and which are triggered,
+ * and to call their interrupt handlers.
+ */
+static void msm_summary_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+ unsigned long i;
+
+ for (i = find_first_bit(msm_gpio.enabled_irqs, NR_GPIO_IRQS);
+ i < NR_GPIO_IRQS;
+ i = find_next_bit(msm_gpio.enabled_irqs, NR_GPIO_IRQS, i + 1)) {
+ if (readl(GPIO_INTR_STATUS(i)) & BIT(INTR_STATUS_BIT))
+ generic_handle_irq(msm_gpio_to_irq(&msm_gpio.gpio_chip,
+ i));
+ }
+ desc->chip->ack(irq);
+}
+
+static int msm_gpio_irq_set_wake(unsigned int irq, unsigned int on)
+{
+ int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, irq);
+
+ if (on) {
+ if (bitmap_empty(msm_gpio.wake_irqs, NR_GPIO_IRQS))
+ set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 1);
+ set_bit(gpio, msm_gpio.wake_irqs);
+ } else {
+ clear_bit(gpio, msm_gpio.wake_irqs);
+ if (bitmap_empty(msm_gpio.wake_irqs, NR_GPIO_IRQS))
+ set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 0);
+ }
+
+ return 0;
+}
+
+static struct irq_chip msm_gpio_irq_chip = {
+ .name = "msmgpio",
+ .mask = msm_gpio_irq_mask,
+ .unmask = msm_gpio_irq_unmask,
+ .ack = msm_gpio_irq_ack,
+ .set_type = msm_gpio_irq_set_type,
+ .set_wake = msm_gpio_irq_set_wake,
};
static int __devinit msm_gpio_probe(struct platform_device *dev)
{
- int ret;
+ int i, irq, ret;
spin_lock_init(&tlmm_lock);
- msm_gpio.label = dev->name;
- ret = gpiochip_add(&msm_gpio);
+ bitmap_zero(msm_gpio.enabled_irqs, NR_GPIO_IRQS);
+ bitmap_zero(msm_gpio.wake_irqs, NR_GPIO_IRQS);
+ bitmap_zero(msm_gpio.dual_edge_irqs, NR_GPIO_IRQS);
+ msm_gpio.gpio_chip.label = dev->name;
+ ret = gpiochip_add(&msm_gpio.gpio_chip);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < msm_gpio.gpio_chip.ngpio; ++i) {
+ irq = msm_gpio_to_irq(&msm_gpio.gpio_chip, i);
+ set_irq_chip(irq, &msm_gpio_irq_chip);
+ set_irq_handler(irq, handle_level_irq);
+ set_irq_flags(irq, IRQF_VALID);
+ }
- return ret;
+ set_irq_chained_handler(TLMM_SCSS_SUMMARY_IRQ,
+ msm_summary_irq_handler);
+ return 0;
}
static int __devexit msm_gpio_remove(struct platform_device *dev)
{
- int ret = gpiochip_remove(&msm_gpio);
+ int ret = gpiochip_remove(&msm_gpio.gpio_chip);
if (ret < 0)
return ret;
@@ -121,12 +388,53 @@ static int __devexit msm_gpio_remove(struct platform_device *dev)
return 0;
}
+#ifdef CONFIG_PM
+static int msm_gpio_suspend_noirq(struct device *dev)
+{
+ unsigned long irq_flags;
+ unsigned long i;
+
+ spin_lock_irqsave(&tlmm_lock, irq_flags);
+ for_each_set_bit(i, msm_gpio.enabled_irqs, NR_GPIO_IRQS) {
+ if (!test_bit(i, msm_gpio.wake_irqs))
+ writel(TARGET_PROC_NONE, GPIO_INTR_CFG_SU(i));
+ }
+ spin_unlock_irqrestore(&tlmm_lock, irq_flags);
+ return 0;
+}
+
+static int msm_gpio_resume_noirq(struct device *dev)
+{
+ unsigned long irq_flags;
+ unsigned long i;
+
+ spin_lock_irqsave(&tlmm_lock, irq_flags);
+ for_each_set_bit(i, msm_gpio.enabled_irqs, NR_GPIO_IRQS)
+ writel(TARGET_PROC_SCORPION, GPIO_INTR_CFG_SU(i));
+ spin_unlock_irqrestore(&tlmm_lock, irq_flags);
+ return 0;
+}
+#else
+#define msm_gpio_suspend_noirq NULL
+#define msm_gpio_resume_noirq NULL
+#endif
+
+static const struct dev_pm_ops msm_gpio_dev_pm_ops = {
+ .suspend_noirq = msm_gpio_suspend_noirq,
+ .resume_noirq = msm_gpio_resume_noirq,
+ .freeze_noirq = msm_gpio_suspend_noirq,
+ .thaw_noirq = msm_gpio_resume_noirq,
+ .poweroff_noirq = msm_gpio_suspend_noirq,
+ .restore_noirq = msm_gpio_resume_noirq,
+};
+
static struct platform_driver msm_gpio_driver = {
.probe = msm_gpio_probe,
.remove = __devexit_p(msm_gpio_remove),
.driver = {
.name = "msmgpio",
.owner = THIS_MODULE,
+ .pm = &msm_gpio_dev_pm_ops,
},
};
--
1.7.0.4
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
More information about the linux-arm-kernel
mailing list