[PATCH 09/17] UCB1400: Pass ucb1400-gpio data through ac97 bus
Eric Miao
eric.y.miao at gmail.com
Tue Nov 30 21:51:12 EST 2010
Cc'ed Samuel for the MFD part.
On Wed, Nov 3, 2010 at 7:51 AM, Marek Vasut <marek.vasut at gmail.com> wrote:
> Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
> ---
> drivers/gpio/ucb1400_gpio.c | 19 ++++++-------------
> drivers/mfd/ucb1400_core.c | 5 +++++
> include/linux/ucb1400.h | 19 ++++++-------------
> 3 files changed, 17 insertions(+), 26 deletions(-)
>
> diff --git a/drivers/gpio/ucb1400_gpio.c b/drivers/gpio/ucb1400_gpio.c
> index 50e6bd1..fba45a5 100644
> --- a/drivers/gpio/ucb1400_gpio.c
> +++ b/drivers/gpio/ucb1400_gpio.c
> @@ -12,8 +12,6 @@
> #include <linux/module.h>
> #include <linux/ucb1400.h>
>
> -struct ucb1400_gpio_data *ucbdata;
> -
> static int ucb1400_gpio_dir_in(struct gpio_chip *gc, unsigned off)
> {
> struct ucb1400_gpio *gpio;
> @@ -50,7 +48,7 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
> struct ucb1400_gpio *ucb = dev->dev.platform_data;
> int err = 0;
>
> - if (!(ucbdata && ucbdata->gpio_offset)) {
> + if (!(ucb && ucb->gpio_offset)) {
> err = -EINVAL;
> goto err;
> }
> @@ -58,7 +56,7 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
> platform_set_drvdata(dev, ucb);
>
> ucb->gc.label = "ucb1400_gpio";
> - ucb->gc.base = ucbdata->gpio_offset;
> + ucb->gc.base = ucb->gpio_offset;
> ucb->gc.ngpio = 10;
> ucb->gc.owner = THIS_MODULE;
>
> @@ -72,8 +70,8 @@ static int ucb1400_gpio_probe(struct platform_device *dev)
> if (err)
> goto err;
>
> - if (ucbdata && ucbdata->gpio_setup)
> - err = ucbdata->gpio_setup(&dev->dev, ucb->gc.ngpio);
> + if (ucb && ucb->gpio_setup)
> + err = ucb->gpio_setup(&dev->dev, ucb->gc.ngpio);
>
> err:
> return err;
> @@ -85,8 +83,8 @@ static int ucb1400_gpio_remove(struct platform_device *dev)
> int err = 0;
> struct ucb1400_gpio *ucb = platform_get_drvdata(dev);
>
> - if (ucbdata && ucbdata->gpio_teardown) {
> - err = ucbdata->gpio_teardown(&dev->dev, ucb->gc.ngpio);
> + if (ucb && ucb->gpio_teardown) {
> + err = ucb->gpio_teardown(&dev->dev, ucb->gc.ngpio);
> if (err)
> return err;
> }
> @@ -113,11 +111,6 @@ static void __exit ucb1400_gpio_exit(void)
> platform_driver_unregister(&ucb1400_gpio_driver);
> }
>
> -void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data)
> -{
> - ucbdata = data;
> -}
> -
> module_init(ucb1400_gpio_init);
> module_exit(ucb1400_gpio_exit);
>
> diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c
> index d73f84b..63f4969 100644
> --- a/drivers/mfd/ucb1400_core.c
> +++ b/drivers/mfd/ucb1400_core.c
> @@ -75,6 +75,11 @@ static int ucb1400_core_probe(struct device *dev)
>
> /* GPIO */
> ucb_gpio.ac97 = ac97;
> + if (pdata) {
> + ucb_gpio.gpio_setup = pdata->gpio_setup;
> + ucb_gpio.gpio_teardown = pdata->gpio_teardown;
> + ucb_gpio.gpio_offset = pdata->gpio_offset;
> + }
> ucb->ucb1400_gpio = platform_device_alloc("ucb1400_gpio", -1);
> if (!ucb->ucb1400_gpio) {
> err = -ENOMEM;
> diff --git a/include/linux/ucb1400.h b/include/linux/ucb1400.h
> index 1b47909..1a6bfdd 100644
> --- a/include/linux/ucb1400.h
> +++ b/include/linux/ucb1400.h
> @@ -83,15 +83,12 @@
> #define UCB_ID 0x7e
> #define UCB_ID_1400 0x4304
>
> -struct ucb1400_gpio_data {
> - int gpio_offset;
> - int (*gpio_setup)(struct device *dev, int ngpio);
> - int (*gpio_teardown)(struct device *dev, int ngpio);
> -};
> -
> struct ucb1400_gpio {
> struct gpio_chip gc;
> struct snd_ac97 *ac97;
> + int gpio_offset;
> + int (*gpio_setup)(struct device *dev, int ngpio);
> + int (*gpio_teardown)(struct device *dev, int ngpio);
> };
>
> struct ucb1400_ts {
> @@ -112,6 +109,9 @@ struct ucb1400 {
>
> struct ucb1400_pdata {
> int irq;
> + int gpio_offset;
> + int (*gpio_setup)(struct device *dev, int ngpio);
> + int (*gpio_teardown)(struct device *dev, int ngpio);
> };
>
> static inline u16 ucb1400_reg_read(struct snd_ac97 *ac97, u16 reg)
> @@ -163,11 +163,4 @@ static inline void ucb1400_adc_disable(struct snd_ac97 *ac97)
>
> unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
> int adcsync);
> -
> -#ifdef CONFIG_GPIO_UCB1400
> -void __init ucb1400_gpio_set_data(struct ucb1400_gpio_data *data);
> -#else
> -static inline void ucb1400_gpio_set_data(struct ucb1400_gpio_data *data) {}
> -#endif
> -
> #endif
> --
> 1.7.2.3
>
>
More information about the linux-arm-kernel
mailing list