[PATCH 2/3] OMAP: use generic DPI panel driver in board files
Bryan Wu
bryan.wu at canonical.com
Mon Nov 8 16:44:59 EST 2010
Still keep sharp_ls_panel, since the sharp_ls_panel driver contains blacklight
control driver code which will be moved out later. Then we can use generic DPI
driver for sharp_ls_panel.
Signed-off-by: Bryan Wu <bryan.wu at canonical.com>
---
arch/arm/mach-omap2/board-3430sdp.c | 10 +++++++---
arch/arm/mach-omap2/board-am3517evm.c | 19 +++++++++++++------
arch/arm/mach-omap2/board-cm-t35.c | 19 +++++++++++++------
arch/arm/mach-omap2/board-devkit8000.c | 22 ++++++++++++++--------
arch/arm/mach-omap2/board-igep0020.c | 10 +++++++---
arch/arm/mach-omap2/board-omap3beagle.c | 10 +++++++---
arch/arm/mach-omap2/board-omap3evm.c | 10 +++++++---
arch/arm/mach-omap2/board-omap3stalker.c | 19 +++++++++++++------
8 files changed, 81 insertions(+), 38 deletions(-)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 4e3742c..0561e45 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -38,6 +38,7 @@
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include <plat/gpmc-smc91x.h>
@@ -270,11 +271,14 @@ static struct omap_dss_device sdp3430_lcd_device = {
.platform_disable = sdp3430_panel_disable_lcd,
};
+static struct generic_dpi_panel_data dvi_panel = {
+ .name = "generic",
+};
+
static struct omap_dss_device sdp3430_dvi_device = {
.name = "dvi",
- .driver_name = "generic_panel",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .phy.dpi.data_lines = 24,
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
.platform_enable = sdp3430_panel_enable_dvi,
.platform_disable = sdp3430_panel_disable_dvi,
};
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index 0739950..875fab0 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -35,6 +35,7 @@
#include <plat/common.h>
#include <plat/usb.h>
#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include "mux.h"
#include "control.h"
@@ -303,11 +304,14 @@ static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev)
lcd_enabled = 0;
}
+static struct generic_dpi_panel_data lcd_panel = {
+ .name = "sharp_lq",
+};
+
static struct omap_dss_device am3517_evm_lcd_device = {
- .type = OMAP_DISPLAY_TYPE_DPI,
.name = "lcd",
- .driver_name = "sharp_lq_panel",
- .phy.dpi.data_lines = 16,
+ .driver_name = "generic_dpi_panel",
+ .data = &lcd_panel,
.platform_enable = am3517_evm_panel_enable_lcd,
.platform_disable = am3517_evm_panel_disable_lcd,
};
@@ -346,11 +350,14 @@ static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
+static struct generic_dpi_panel_data dvi_panel = {
+ .name = "generic",
+};
+
static struct omap_dss_device am3517_evm_dvi_device = {
- .type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_panel",
- .phy.dpi.data_lines = 24,
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
.platform_enable = am3517_evm_panel_enable_dvi,
.platform_disable = am3517_evm_panel_disable_dvi,
};
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 63f764e..1b7748b 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -46,6 +46,7 @@
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include <plat/mcspi.h>
#include <mach/hardware.h>
@@ -351,20 +352,26 @@ static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev)
{
}
+static struct generic_dpi_panel_data lcd_panel = {
+ .name = "toppoly_tdo35s",
+};
+
static struct omap_dss_device cm_t35_lcd_device = {
.name = "lcd",
- .driver_name = "toppoly_tdo35s_panel",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .phy.dpi.data_lines = 18,
+ .driver_name = "generic_dpi_panel",
+ .data = &lcd_panel,
.platform_enable = cm_t35_panel_enable_lcd,
.platform_disable = cm_t35_panel_disable_lcd,
};
+static struct generic_dpi_panel_data dvi_panel = {
+ .name = "generic",
+};
+
static struct omap_dss_device cm_t35_dvi_device = {
.name = "dvi",
- .driver_name = "generic_panel",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .phy.dpi.data_lines = 24,
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
.platform_enable = cm_t35_panel_enable_dvi,
.platform_disable = cm_t35_panel_disable_dvi,
};
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 067f437..cdea207 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -46,6 +46,7 @@
#include <plat/nand.h>
#include <plat/usb.h>
#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
@@ -149,21 +150,26 @@ static struct regulator_consumer_supply devkit8000_vmmc1_supply =
static struct regulator_consumer_supply devkit8000_vio_supply =
REGULATOR_SUPPLY("vcc", "spi2.0");
+static struct generic_dpi_panel_data lcd_panel = {
+ .name = "generic",
+};
+
static struct omap_dss_device devkit8000_lcd_device = {
.name = "lcd",
- .driver_name = "generic_panel",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .phy.dpi.data_lines = 24,
- .reset_gpio = -EINVAL, /* will be replaced */
+ .driver_name = "generic_dpi_panel",
+ .data = &lcd_panel,
.platform_enable = devkit8000_panel_enable_lcd,
.platform_disable = devkit8000_panel_disable_lcd,
};
+
+static struct generic_dpi_panel_data dvi_panel = {
+ .name = "generic",
+};
+
static struct omap_dss_device devkit8000_dvi_device = {
.name = "dvi",
- .driver_name = "generic_panel",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .phy.dpi.data_lines = 24,
- .reset_gpio = -EINVAL, /* will be replaced */
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
.platform_enable = devkit8000_panel_enable_dvi,
.platform_disable = devkit8000_panel_disable_dvi,
};
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 5e035a5..9aa0860 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -30,6 +30,7 @@
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include <plat/onenand.h>
#include "mux.h"
@@ -433,11 +434,14 @@ static void igep2_disable_dvi(struct omap_dss_device *dssdev)
gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
}
+static struct generic_dpi_panel_data dvi_panel = {
+ .name = "generic",
+};
+
static struct omap_dss_device igep2_dvi_device = {
- .type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_panel",
- .phy.dpi.data_lines = 24,
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
.platform_enable = igep2_enable_dvi,
.platform_disable = igep2_disable_dvi,
};
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 14f4224..d74fd1a 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -41,6 +41,7 @@
#include <plat/board.h>
#include <plat/common.h>
#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
@@ -194,11 +195,14 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev)
gpio_set_value(dssdev->reset_gpio, 0);
}
+static struct generic_dpi_panel_data dvi_panel = {
+ .name = "generic",
+};
+
static struct omap_dss_device beagle_dvi_device = {
- .type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
- .driver_name = "generic_panel",
- .phy.dpi.data_lines = 24,
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
.reset_gpio = 170,
.platform_enable = beagle_enable_dvi,
.platform_disable = beagle_disable_dvi,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index b04365c..e3200d5 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -43,6 +43,7 @@
#include <plat/common.h>
#include <plat/mcspi.h>
#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
@@ -301,11 +302,14 @@ static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
+static struct generic_dpi_panel_data dvi_panel = {
+ .name = "generic",
+};
+
static struct omap_dss_device omap3_evm_dvi_device = {
.name = "dvi",
- .driver_name = "generic_panel",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .phy.dpi.data_lines = 24,
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
.platform_enable = omap3_evm_enable_dvi,
.platform_disable = omap3_evm_disable_dvi,
};
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index f252721..06a5ea9 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -40,6 +40,7 @@
#include <plat/nand.h>
#include <plat/usb.h>
#include <plat/display.h>
+#include <plat/panel-generic-dpi.h>
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
@@ -160,11 +161,14 @@ static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev)
lcd_enabled = 0;
}
+static struct generic_dpi_panel_data lcd_panel = {
+ .name = "generic",
+};
+
static struct omap_dss_device omap3_stalker_lcd_device = {
.name = "lcd",
- .driver_name = "generic_panel",
- .phy.dpi.data_lines = 24,
- .type = OMAP_DISPLAY_TYPE_DPI,
+ .driver_name = "generic_dpi_panel",
+ .data = &lcd_panel,
.platform_enable = omap3_stalker_enable_lcd,
.platform_disable = omap3_stalker_disable_lcd,
};
@@ -208,11 +212,14 @@ static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
+static struct generic_dpi_panel_data dvi_panel = {
+ .name = "generic",
+};
+
static struct omap_dss_device omap3_stalker_dvi_device = {
.name = "dvi",
- .driver_name = "generic_panel",
- .type = OMAP_DISPLAY_TYPE_DPI,
- .phy.dpi.data_lines = 24,
+ .driver_name = "generic_dpi_panel",
+ .data = &dvi_panel,
.platform_enable = omap3_stalker_enable_dvi,
.platform_disable = omap3_stalker_disable_dvi,
};
--
1.7.1
More information about the linux-arm-kernel
mailing list