[PATCH 1/3] OMAP: DSS2: Add generic DPI panel display driver
Tomi Valkeinen
tomi.valkeinen at nokia.com
Wed Nov 10 09:35:07 EST 2010
Hi,
On Tue, 2010-11-09 at 18:12 +0100, ext Bryan Wu wrote:
> Generic DPI panel driver includes the driver and 4 similar panel configurations. It
> will match the panel name which is passed from platform data and setup the
> right configurations.
>
> With generic DPI panel driver, we can remove those 4 duplicated panel display
> drivers. In the future, it is simple for us just add new panel configuration
> date in panel-generic-dpi.c to support new display panel.
This is looking good, but still a couple of comments inline:
> Signed-off-by: Bryan Wu <bryan.wu at canonical.com>
> ---
> .../arm/plat-omap/include/plat/panel-generic-dpi.h | 37 +++
> drivers/video/omap2/displays/Kconfig | 8 +
> drivers/video/omap2/displays/Makefile | 1 +
> drivers/video/omap2/displays/panel-generic-dpi.c | 309 ++++++++++++++++++++
> 4 files changed, 355 insertions(+), 0 deletions(-)
> create mode 100644 arch/arm/plat-omap/include/plat/panel-generic-dpi.h
> create mode 100644 drivers/video/omap2/displays/panel-generic-dpi.c
>
> diff --git a/arch/arm/plat-omap/include/plat/panel-generic-dpi.h b/arch/arm/plat-omap/include/plat/panel-generic-dpi.h
> new file mode 100644
> index 0000000..7906197
> --- /dev/null
> +++ b/arch/arm/plat-omap/include/plat/panel-generic-dpi.h
> @@ -0,0 +1,37 @@
> +/*
> + * Header for generic DPI panel driver
> + *
> + * Copyright (C) 2010 Canonical Ltd.
> + * Author: Bryan Wu <bryan.wu at canonical.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __ARCH_ARM_PLAT_OMAP_PANEL_GENERIC_DPI_H
> +#define __ARCH_ARM_PLAT_OMAP_PANEL_GENERIC_DPI_H
> +
> +#include "display.h"
> +
> +/**
> + * struct panel_generic_dpi_data - panel driver configuration data
> + * @name: panel name
> + * @platform_enable: platform specific panel enable function
> + * @platform_disable: platform specific panel disable function
> + */
> +struct panel_generic_dpi_data {
> + const char *name;
> + int (*platform_enable)(struct omap_dss_device *dssdev);
> + void (*platform_disable)(struct omap_dss_device *dssdev);
> +};
> +
> +#endif /* __ARCH_ARM_PLAT_OMAP_PANEL_GENERIC_DPI_H */
> diff --git a/drivers/video/omap2/displays/Kconfig b/drivers/video/omap2/displays/Kconfig
> index 12327bb..cb3e339 100644
> --- a/drivers/video/omap2/displays/Kconfig
> +++ b/drivers/video/omap2/displays/Kconfig
> @@ -1,6 +1,14 @@
> menu "OMAP2/3 Display Device Drivers"
> depends on OMAP2_DSS
>
> +config PANEL_GENERIC_DPI
> + tristate "Generic DPI Panel"
> + help
> + Generic DPI panel driver.
> + Supports DVI output for Beagle and OMAP3 SDP.
> + Supports LCD Panel used in TI SDP3430 and EVM boards,
> + OMAP3517 EVM boards and CM-T35.
> +
> config PANEL_GENERIC
> tristate "Generic Panel"
> help
> diff --git a/drivers/video/omap2/displays/Makefile b/drivers/video/omap2/displays/Makefile
> index aa38609..022058c 100644
> --- a/drivers/video/omap2/displays/Makefile
> +++ b/drivers/video/omap2/displays/Makefile
> @@ -1,3 +1,4 @@
> +obj-$(CONFIG_PANEL_GENERIC_DPI) += panel-generic-dpi.o
> obj-$(CONFIG_PANEL_GENERIC) += panel-generic.o
> obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
> obj-$(CONFIG_PANEL_SHARP_LQ043T1DG01) += panel-sharp-lq043t1dg01.o
> diff --git a/drivers/video/omap2/displays/panel-generic-dpi.c b/drivers/video/omap2/displays/panel-generic-dpi.c
> new file mode 100644
> index 0000000..7ddd631
> --- /dev/null
> +++ b/drivers/video/omap2/displays/panel-generic-dpi.c
> @@ -0,0 +1,309 @@
> +/*
> + * Generic DPI Panels support
> + *
> + * Copyright (C) 2010 Canonical Ltd.
> + * Author: Bryan Wu <bryan.wu at canonical.com>
> + *
> + * Copyright (C) 2008 Nokia Corporation
> + * Author: Tomi Valkeinen <tomi.valkeinen at nokia.com>
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License version 2 as published by
> + * the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +
> +#include <plat/panel-generic-dpi.h>
> +
> +struct panel_config {
> + struct omap_video_timings timings;
> +
> + int acbi; /* ac-bias pin transitions per interrupt */
> + /* Unit: line clocks */
> + int acb; /* ac-bias pin frequency */
> +
> + enum omap_panel_config config;
> +
> + /*
> + * Used to match device to panel configuration
> + * when use generic panel driver
> + */
> + const char *name;
> +};
> +
> +/* Panel configurations */
> +static struct panel_config generic_dpi_panels[] = {
> + /* Generic Panel */
> + {
> + {
> + .x_res = 640,
> + .y_res = 480,
> +
> + .pixel_clock = 23500,
> +
> + .hfp = 48,
> + .hsw = 32,
> + .hbp = 80,
> +
> + .vfp = 3,
> + .vsw = 4,
> + .vbp = 7,
> + },
> + .acbi = 0x0,
> + .acb = 0x0,
> + .config = OMAP_DSS_LCD_TFT,
> + .name = "generic",
> + },
> +
> + /* Sharp LQ043T1DG01 */
> + {
> + {
> + .x_res = 480,
> + .y_res = 272,
> +
> + .pixel_clock = 9000,
> +
> + .hsw = 42,
> + .hfp = 3,
> + .hbp = 2,
> +
> + .vsw = 11,
> + .vfp = 3,
> + .vbp = 2,
> + },
> + .acbi = 0x0,
> + .acb = 0x0,
> + .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
> + OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IEO,
> + .name = "sharp_lq",
> + },
> +
> + /* Sharp LS037V7DW01 */
> + {
> + {
> + .x_res = 480,
> + .y_res = 640,
> +
> + .pixel_clock = 19200,
> +
> + .hsw = 2,
> + .hfp = 1,
> + .hbp = 28,
> +
> + .vsw = 1,
> + .vfp = 1,
> + .vbp = 1,
> + },
> + .acbi = 0x0,
> + .acb = 0x28,
> + .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
> + OMAP_DSS_LCD_IHS,
> + .name = "sharp_ls",
> + },
> +
> + /* Toppoly TDO35S */
> + {
> + {
> + .x_res = 480,
> + .y_res = 640,
> +
> + .pixel_clock = 26000,
> +
> + .hfp = 104,
> + .hsw = 8,
> + .hbp = 8,
> +
> + .vfp = 4,
> + .vsw = 2,
> + .vbp = 2,
> + },
> + .acbi = 0x0,
> + .acb = 0x0,
> + .config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
> + OMAP_DSS_LCD_IHS | OMAP_DSS_LCD_IPC |
> + OMAP_DSS_LCD_ONOFF,
> + .name = "toppoly_tdo35s",
> + },
> +};
> +
> +static inline struct panel_generic_dpi_data
> +*get_panel_data(const struct omap_dss_device *dssdev)
> +{
> + return (struct panel_generic_dpi_data *) dssdev->data;
> +}
> +
> +
> +static int generic_dpi_panel_power_on(struct omap_dss_device *dssdev)
> +{
> + int r;
> + struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
> +
> + if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
> + return 0;
> +
> + r = omapdss_dpi_display_enable(dssdev);
> + if (r)
> + goto err0;
> +
> + if (panel_data->platform_enable) {
> + r = panel_data->platform_enable(dssdev);
> + if (r)
> + goto err1;
> + }
> +
> + return 0;
> +err1:
> + omapdss_dpi_display_disable(dssdev);
> +err0:
> + return r;
> +}
> +
> +static void generic_dpi_panel_power_off(struct omap_dss_device *dssdev)
> +{
> + struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
> +
> + if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
> + return;
> +
> + if (panel_data->platform_disable)
> + panel_data->platform_disable(dssdev);
> +
> + omapdss_dpi_display_disable(dssdev);
> +}
For both panel power on and off some panels require some sleep times:
when powering on, the video interface has to be enabled for some time
before the panel can be enabled, and similarly when powering off the
video interface needs to be on for some time after the panel has been
disabled.
See for example sharp_lq driver's power_on/off.
This should be handled similarly that what we have in panel-taal:
configuration options in the panel_config struct for the sleep times
(and if it's 0, no sleep done).
> +
> +static int generic_dpi_panel_probe(struct omap_dss_device *dssdev)
> +{
> + struct panel_generic_dpi_data *panel_data = get_panel_data(dssdev);
> + struct panel_config *panel_config = NULL;
> + int i;
> +
> + dev_dbg(&dssdev->dev, "probe\n");
> +
> + if (!panel_data || !panel_data->name)
> + return -EINVAL;
> +
> + for (i = 0; i < ARRAY_SIZE(generic_dpi_panels); i++) {
> + if (strcmp(panel_data->name, generic_dpi_panels[i].name) == 0) {
> + panel_config = &generic_dpi_panels[i];
> + break;
> + }
> + }
> +
> + if (!panel_config)
> + return -EINVAL;
> +
> + dssdev->type = OMAP_DISPLAY_TYPE_DPI;
Leave this display type also in to the board file. It defines the
interface (like the data_lines), not the panel.
I think otherwise the patches look good. At some point we should add
backlight support also, so that we can remove a few drivers more (and
get rid of the extra backlight stuff in omap_dss_device struct).
Tomi
More information about the linux-arm-kernel
mailing list