[PATCH 2/5] omap4: l2x0: Construct the AUXCTRL value using defines

[Santosh Shilimkar]

This patch removes the hardcoded value of auxctrl value and
construct it using bitfields

Bit 25 is reserved and is always set to 1. Same value
of this bit is retained in this patch

Signed-off-by: Santosh Shilimkar <santosh.shilimkar at ti.com>
Tested-by: Nishanth Menon <nm at ti.com>
---
 arch/arm/mach-omap2/omap4-common.c |   13 +++++++++++--
 1 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 2f89555..c814604 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -53,6 +53,8 @@ static void omap4_l2x0_disable(void)
 
 static int __init omap_l2_cache_init(void)
 {
+	u32 aux_ctrl = 0;
+
 	/*
 	 * To avoid code running on other OMAPs in
 	 * multi-omap builds
@@ -72,10 +74,17 @@ static int __init omap_l2_cache_init(void)
 	 * Way size - 32KB (es1.0)
 	 * Way size - 64KB (es2.0 +)
 	 */
+	aux_ctrl = ((1 << L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT) |
+			(0x1 << 25) |
+			(0x1 << L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT) |
+			(0x1 << L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT));
+
 	if (omap_rev() == OMAP4430_REV_ES1_0)
-		l2x0_init(l2cache_base, 0x0e050000, 0xc0000fff);
+		aux_ctrl |= 0x2 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT;
 	else
-		l2x0_init(l2cache_base, 0x0e070000, 0xc0000fff);
+		aux_ctrl |= 0x3 << L2X0_AUX_CTRL_WAY_SIZE_SHIFT;
+
+	l2x0_init(l2cache_base, aux_ctrl, L2X0_AUX_CTRL_MASK);
 
 	/*
 	 * Override default outer_cache.disable with a OMAP4
-- 
1.6.0.4