[PATCH 04/15] ARM: mxs: Add interrupt support

[Shawn Guo]

Add Interrupt Collector (ICOLL) support for MXS-based.

Signed-off-by: Shawn Guo <shawn.guo at freescale.com>
---
 arch/arm/mach-mxs/icoll.c                    |   77 ++++++++++++++++++++++++++
 arch/arm/mach-mxs/include/mach/entry-macro.S |   36 ++++++++++++
 2 files changed, 113 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-mxs/icoll.c
 create mode 100644 arch/arm/mach-mxs/include/mach/entry-macro.S

diff --git a/arch/arm/mach-mxs/icoll.c b/arch/arm/mach-mxs/icoll.c
new file mode 100644
index 0000000..a7a7d4f
--- /dev/null
+++ b/arch/arm/mach-mxs/icoll.c
@@ -0,0 +1,77 @@
+/*
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#define HW_ICOLL_VECTOR				0x0000
+#define HW_ICOLL_LEVELACK			0x0010
+#define HW_ICOLL_CTRL				0x0020
+#define HW_ICOLL_INTERRUPTn_SET(n)		(0x0124 + (n) * 0x10)
+#define HW_ICOLL_INTERRUPTn_CLR(n)		(0x0128 + (n) * 0x10)
+#define BM_ICOLL_INTERRUPTn_ENABLE		0x00000004
+#define BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0	0x1
+
+void __iomem *icoll_base;
+
+static void icoll_ack_irq(unsigned int irq)
+{
+	__raw_writel(0, icoll_base + HW_ICOLL_VECTOR);
+
+	/* ACK current interrupt (level 0) */
+	__raw_writel(BV_ICOLL_LEVELACK_IRQLEVELACK__LEVEL0,
+			icoll_base + HW_ICOLL_LEVELACK);
+}
+
+static void icoll_mask_irq(unsigned int irq)
+{
+	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
+			icoll_base + HW_ICOLL_INTERRUPTn_CLR(irq));
+}
+
+static void icoll_unmask_irq(unsigned int irq)
+{
+	__raw_writel(BM_ICOLL_INTERRUPTn_ENABLE,
+			icoll_base + HW_ICOLL_INTERRUPTn_SET(irq));
+}
+
+static struct irq_chip mxs_icoll_chip = {
+	.ack = icoll_ack_irq,
+	.mask = icoll_mask_irq,
+	.unmask = icoll_unmask_irq,
+};
+
+void __init icoll_init_irq(void __iomem *irqbase)
+{
+	int i;
+
+	icoll_base = irqbase;
+
+	/* Reset icoll */
+	mxs_reset_block(irqbase + HW_ICOLL_CTRL);
+
+	for (i = 0; i < MXS_INTERNAL_IRQS; i++) {
+		set_irq_chip(i, &mxs_icoll_chip);
+		set_irq_handler(i, handle_level_irq);
+		set_irq_flags(i, IRQF_VALID);
+	}
+}
diff --git a/arch/arm/mach-mxs/include/mach/entry-macro.S b/arch/arm/mach-mxs/include/mach/entry-macro.S
new file mode 100644
index 0000000..597948d
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/entry-macro.S
@@ -0,0 +1,36 @@
+/*
+ * Low-level IRQ helper macros for Freescale MXS-based
+ *
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\base, =icoll_base
+	ldr	\base, [\base]
+	ldr	\irqnr, [\base, #0x70]
+	cmp	\irqnr, #0x7F
+	moveqs	\irqnr, #0
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
-- 
1.7.1