[PATCHv3 1/2] ARM: imx: Add core definitions for MX53

[Sascha Hauer]

On Wed, Nov 10, 2010 at 08:51:19AM -0700, Nguyen Dinh-R00091 wrote:
> Hi Sascha,
> 
> >-----Original Message-----
> >From: Sascha Hauer [mailto:s.hauer at pengutronix.de]
> >Sent: Tuesday, November 09, 2010 3:46 PM
> >To: Nguyen Dinh-R00091
> >Cc: linux-kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org;
> linux at arm.linux.org.uk;
> >u.kleine-koenig at pengutronix.de; amit.kucheria at canonical.com;
> eric at eukrea.com
> >Subject: Re: [PATCHv3 1/2] ARM: imx: Add core definitions for MX53
> >
> >Hi Dinh,
> >
> >On Fri, Nov 05, 2010 at 10:55:50AM -0500, Dinh.Nguyen at freescale.com
> wrote:
> >> From: Dinh Nguyen <Dinh.Nguyen at freescale.com>
> >>
> >> Add iomux, clocks,  and memory map for Freescale's MX53 SoC.
> >> Add cpu_is_mx53 function to common.h.
> >> Add 3 more banks of gpio's to mxc_gpio_ports.
> >> Add MX53 phys offset address.
> >>
> >> Signed-off-by: Dinh Nguyen <Dinh.Nguyen at freescale.com>
> >> ---
> >>  arch/arm/mach-mx5/clock-mx53.c              |  857
> +++++++++++++++++++++++++++
> >>  arch/arm/mach-mx5/devices.c                 |   27 +
> >>  arch/arm/plat-mxc/include/mach/common.h     |    4 +
> >>  arch/arm/plat-mxc/include/mach/iomux-mx53.h |  303 ++++++++++
> >>  arch/arm/plat-mxc/include/mach/memory.h     |    1 +
> >>  arch/arm/plat-mxc/include/mach/mx53.h       |  406 +++++++++++++
> >>  6 files changed, 1598 insertions(+), 0 deletions(-)
> >>  create mode 100644 arch/arm/mach-mx5/clock-mx53.c
> >>  create mode 100644 arch/arm/plat-mxc/include/mach/iomux-mx53.h
> >>  create mode 100644 arch/arm/plat-mxc/include/mach/mx53.h
> >>
> >> diff --git a/arch/arm/mach-mx5/clock-mx53.c
> b/arch/arm/mach-mx5/clock-mx53.c
> >> new file mode 100644
> >> index 0000000..d547cb8
> >> --- /dev/null
> >> +++ b/arch/arm/mach-mx5/clock-mx53.c
> >
> >Most of this code looks like it could be shared with clock-mx51.c
> 
> Agreed, but I was unsure how to proceed with adding clock code for mx53.
> Should I merge mx53 clock code into clock-mx51 and rename clock-mx51?

Yes, to something like clock-mx51-mx53.c

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |