January 2010 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Fri Jan 1 01:23:48 EST 2010
Ending: Sun Jan 31 21:01:17 EST 2010
Messages: 2123

• [uClinux-dev] [PATCH] Valid relocation symbol for FLAT format on ARM, v2   Mike Frysinger
• [uClinux-dev] [PATCH] error message when FLAT reloc symbol is invalid, v2   Mike Frysinger
• [PATCH 2/2] pxa: enable L2 if present in XSC3   Eric Miao
• [PATCH 1/2] pxa: unable to enable L2 in outer cache   Eric Miao
• [PATCH] NUC900: Add clock divider API and modify some clk APIs   Wan ZongShun
• [PATCH] ARM: NUC900: rename mtd nand driver name   Wan ZongShun
• [PATCH] ARM: NUC900: rename mtd nand driver name   Wolfgang Denk
• [PATCH] ARM: NUC900: rename mtd nand driver name   Wan ZongShun
• [PATCH] ARM: NUC900: rename mtd nand driver name   David Woodhouse
• [PATCH] ARM: NUC900: rename mtd nand driver name   Wan ZongShun
• tree with htc dream support   Pavel Machek
• tree with htc dream support   Pavel Machek
• tree with htc dream support   Daniel Walker
• Amba device porting   Russell King - ARM Linux
• Footbridge / 21285 phsical/virtual address selection patch   Russell King - ARM Linux
• 21285 serial driver deadlock(?) fix   Russell King - ARM Linux
• [PATCH] scripts: add ARM support to decodecode   Russell King - ARM Linux
• [PATCH] ARM: fix "BUG: using smp_processor_id() in preemptible code"   Russell King - ARM Linux
• [PATCH] Valid relocation symbol for FLAT format on ARM   Russell King - ARM Linux
• SMP issues on ARM11 MPCore   Russell King - ARM Linux
• [PATCH] Valid relocation symbol for FLAT format on ARM   Russell King - ARM Linux
• tree with htc dream support   Pavel Machek
• [PATCH 0/18] PNX4008 patchset (updated with Vitaly's acks, plus a few more patches)   Russell King - ARM Linux
• [PATCH 01/18] ARM: PNX4008: convert to clkdev   Russell King - ARM Linux
• [PATCH 02/18] ARM: PNX4008: simplify clk enable/disable paths   Russell King - ARM Linux
• [PATCH 03/18] ARM: PNX4008: provide clock enable/disable methods and initialization   Russell King - ARM Linux
• [PATCH 04/18] ARM: PNX4008: convert watchdog clocks to match by device only   Russell King - ARM Linux
• [PATCH 05/18] ARM: PNX4008: convert watchdog to use clk API enable/disable calls   Russell King - ARM Linux
• [PATCH 06/18] ARM: PNX4008: convert i2c clocks to match by device only   Russell King - ARM Linux
• [PATCH 07/18] ARM: PNX4008: move i2c suspend/resume callbacks into driver   Russell King - ARM Linux
• [PATCH 08/18] ARM: PNX4008: move i2c clock start/stop into driver   Russell King - ARM Linux
• [PATCH 09/18] ARM: PNX4008: convert i2c-pnx to use clk API enable/disable calls   Russell King - ARM Linux
• [PATCH 10/18] ARM: PNX4008: get i2c clock rate from clk API   Russell King - ARM Linux
• [PATCH 11/18] ARM: PNX4008: remove platform definitions from mach/timex.h   Russell King - ARM Linux
• [PATCH 12/18] ARM: PNX4008: Make ioaddr 'void __iomem *' rather than 'u32'   Russell King - ARM Linux
• [PATCH 13/18] ARM: PNX4008: kzalloc i2c drivers internal data   Russell King - ARM Linux
• [PATCH 14/18] ARM: PNX4008: move i2c_adapter structure inside the drivers private data   Russell King - ARM Linux
• [PATCH 15/18] ARM: PNX4008: Use i2c driver data for passing between internal functions   Russell King - ARM Linux
• [PATCH 16/18] ARM: PNX4008: i2c-pnx: don't split messages across several lines   Russell King - ARM Linux
• [PATCH 17/18] ARM: PNX4008: i2c-pnx makes no use of asm/uaccess.h nor asm/irq.h   Russell King - ARM Linux
• [PATCH 18/18] ARM: PNX4008: use msecs_to_jiffies() rather than open-coding it   Russell King - ARM Linux
• [PATCH 2/7] [ARM] locomo: avoid the unnecessary cascade of keyboard IRQ   Russell King - ARM Linux
• [PATCH 3/7] [ARM] locomo: remove unused IRQs and avoid unnecessary cascade   Russell King - ARM Linux
• your mail   Russell King - ARM Linux
• 32-rc1 aka 32-rc2: warning at manage.c:361 (set_irq_wake), matrix-keypad related?   Pavel Machek
• Mach-Id query   Wan ZongShun
• Issue in oamp nand driver with 32-bit reads in prefetch mode   Steve Sakoman
• 32-rc1 aka 32-rc2: warning at manage.c:361 (set_irq_wake), matrix-keypad related?   Pavel Machek
• [PATCH] NUC900: Add extern header file support for some driver   Wan ZongShun
• Mach-Id query   Mohan Wankhede
• [PATCH] Valid relocation symbol for FLAT format on ARM   Jun Sun
• [PATCH v3] Valid relocation symbol for FLAT format on ARM   Jun Sun
• 32-rc1 aka 32-rc2: warning at manage.c:361 (set_irq_wake), matrix-keypad related?   Pavel Machek
• [uClinux-dev] [PATCH] Valid relocation symbol for FLAT format on ARM, v2   Jamie Lokier
• [uClinux-dev] [PATCH] Valid relocation symbol for FLAT format on ARM, v2   Jamie Lokier
• [PATCH] NUC900: Add extern header file support for some driver   Wan ZongShun
• 32-rc1 aka 32-rc2: warning at manage.c:361 (set_irq_wake), matrix-keypad related?   Dmitry Torokhov
• 32-rc1 aka 32-rc2: warning at manage.c:361 (set_irq_wake), matrix-keypad related?   Pavel Machek
• [PATCH 2/7] [ARM] locomo: avoid the unnecessary cascade of keyboard IRQ   Eric Miao
• SMP issues on ARM11 MPCore   mkl lin
• [PATCH] ARM: include needed linux/cpu.h in asm/cpu.h   Santosh Shilimkar
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Hui Zhu
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Russell King - ARM Linux
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Hui Zhu
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Russell King - ARM Linux
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Hui Zhu
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Russell King - ARM Linux
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Hui Zhu
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Arjan van de Ven
• SMP issues on ARM11 MPCore   mkl lin
• [PATCH] mach-osiris-dvs.c: Convert boolean bit tests to logical tests   Joe Perches
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Hui Zhu
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Hui Zhu
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Russell King - ARM Linux
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Marek Vasut
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Tejun Heo
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Arjan van de Ven
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Tejun Heo
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Arjan van de Ven
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Tejun Heo
• [ARM] pxa: use chip->ack() instead of accessing GEDR directly   Eric Miao
• [patch 2/4] [ARM] mmp: support marvell ARMADA610   Haojian Zhuang
• [PATCH] mach-osiris-dvs.c: Convert boolean bit tests to logical tests   Ben Dooks
• [patch 2/4] [ARM] mmp: support marvell ARMADA610   Eric Miao
• [PATCH 0/4] Add s3c64xx SROM support and setup SMDK nCS1 for Ethernet   Ben Dooks
• [patch 2/4] [ARM] mmp: support marvell ARMADA610   Haojian Zhuang
• [ARM] pxa: update pwm_backlight->notify() to include missed 'struct device *'   Eric Miao
• [patch 2/4] [ARM] mmp: support marvell ARMADA610   Eric Miao
• [Patch v4] OMAP: sDMA driver: descriptor autoloading feature   Venkatraman S
• [Patch v4] OMAP: sDMA driver: descriptor autoloading feature   Shilimkar, Santosh
• [PATCH] RFC: mx27: Add soc_camera support   javier Martin
• [ARM] pxa: fix compiler warnings of unused variable 'id' in cpu_is_pxa9*()   Eric Miao
• 21285 serial driver deadlock(?) fix   Simon Kagstrom
• [Patch v4] OMAP: sDMA driver: descriptor autoloading feature   Venkatraman S
• [Patch v4] OMAP: sDMA driver: descriptor autoloading feature   Shilimkar, Santosh
• [patch 2/4] [ARM] mmp: support marvell ARMADA610   Haojian Zhuang
• [patch 2/4] [ARM] mmp: support marvell ARMADA610   Russell King - ARM Linux
• [patch 2/4] [ARM] mmp: support marvell ARMADA610   Russell King - ARM Linux
• ARM perf events support v4   Jamie Iles
• [PATCH 1/5] arm: provide a mechanism to reserve performance counters   Jamie Iles
• [PATCH 2/5] arm/oprofile: reserve the PMU when starting   Jamie Iles
• [PATCH 3/5] arm: use the spinlocked, generic atomic64 support   Jamie Iles
• [PATCH 4/5] arm: enable support for software perf events   Jamie Iles
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jamie Iles
• [PATCH 4/5] arm: enable support for software perf events   Russell King - ARM Linux
• [patch 2/4] [ARM] mmp: support marvell ARMADA610   Haojian Zhuang
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Russell King - ARM Linux
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jamie Iles
• [PATCH] RFC: mx27: Add soc_camera support   Alan Carvalho de Assis
• [PATCH] RFC: mx27: Add soc_camera support   javier Martin
• [PATCH 4/5] arm: enable support for software perf events   Jamie Iles
• [PATCH] RFC: mx27: Add soc_camera support   javier Martin
• [PATCH 4/5] arm: enable support for software perf events   Russell King - ARM Linux
• [PATCH] kgdb: Fix ARM build with KGDB disabled   Mark Brown
• mxc pull request for -rc   Sascha Hauer
• [PATCH] ARM: fix "BUG: using smp_processor_id() in preemptible code"   Rabin Vincent
• [RFC PATCH 2/2] ARM: VFP: preserve the HW context when calling signal handlers   Siarhei Siamashka
• [RFC PATCH 2/2] ARM: VFP: preserve the HW context when calling signal handlers   Siarhei Siamashka
• [PATCH 4/4] regulator: add max8925 support   Liam Girdwood
• [PXA320] dmac_flush_range and burst on SMEMC   Russell King - ARM Linux
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Hui Zhu
• Ethernet / SD Boot   Ben Dooks
• kernel boot failure on with s32440/mini2440 with git head (dd59f6c76b2)   Ben Dooks
• kernel boot failure on with s32440/mini2440 with git head (dd59f6c76b2)   Ben Dooks
• [PATCH 06/11] arm-dt: postpone machine detection until setup_arch with CONFIG_ARM_DEVTREE   Ben Dooks
• [PATCH] NUC900: Add extern header file support for some driver   Ben Dooks
• Perf Event support for ARMv7 (was: Re: [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6)   Will Deacon
• [PATCH] NUC900: Add extern header file support for some driver   Russell King - ARM Linux
• Ethernet / SD Boot   Andy Green
• "init_task" belongs to "swapper" or "init" ?   Shivdas Gujare
• Ethernet / SD Boot   Russell King - ARM Linux
• "init_task" belongs to "swapper" or "init" ?   Russell King - ARM Linux
• Ethernet / SD Boot   Andy Green
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v2)   Leif Lindholm
• [PATCH 1/3] mx31ads: Convert 1133-EV1 to use dev_name to specify consumer devices   Mark Brown
• [PATCH 2/3] mx31ads: Allow enable/disable of switchable supplies   Mark Brown
• [PATCH 3/3] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module   Mark Brown
• Ethernet / SD Boot   Jamie Lokier
• [uClinux-dev] [PATCH] Valid relocation symbol for FLAT format on ARM, v2   Jun Sun
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v2)   Jamie Lokier
• [ARM] pxa: use chip->ack() instead of accessing GEDR directly   Marc Zyngier
• [PATCH 06/11] arm-dt: postpone machine detection until setup_arch with CONFIG_ARM_DEVTREE   Jeremy Kerr
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Tejun Heo
• [PATCH 4/4] regulator: add max8925 support   Haojian Zhuang
• [PATCH] NUC900: Add extern header file support for some driver   王强
• [PATCH] NUC900: Add extern header file support for some driver   Wan ZongShun
• [PATCH] NUC900: Add extern header file support for some driver   Wang Qiang
• [PATCH] gic: implement set_type   Rabin Vincent
• [patch 2/4] [ARM] mmp: support marvell ARMADA610   Eric Miao
• [PATCH 3/4] fec: add support for Freescale i.MX25 PDK (3DS)   Baruch Siach
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Hui Zhu
• [patch 2/4] [ARM] mmp: support marvell ARMADA610   Haojian Zhuang
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Tejun Heo
• [PATCH 0/5] V7/Cortex/omap34xx fixes for 2.6.33-rc1: DCC, kexec, atags   Magnus Damm
• [patch 2/4] [ARM] mmp: support marvell ARMADA610   Eric Miao
• [PATCH 4/4] regulator: add max8925 support   Mark Brown
• [PATCH 3/3] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module   Mark Brown
• [PATCH 0/5] V7/Cortex/omap34xx fixes for 2.6.33-rc1: DCC, kexec, atags   Mika Westerberg
• [PATCH 1/3] mx31ads: Convert 1133-EV1 to use dev_name to specify consumer devices   Sascha Hauer
• [PATCH 2/3] mx31ads: Allow enable/disable of switchable supplies   Sascha Hauer
• [PATCH 2/3] mx31ads: Allow enable/disable of switchable supplies   Mark Brown
• [PATCH 2/3] mx31ads: Allow enable/disable of switchable supplies   Sascha Hauer
• [PATCH 1/2] mx31ads: Provide a name for EXPIO interrupt chip   Mark Brown
• [PATCH 2/2] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module   Mark Brown
• [PATCH 2/2] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module   Sascha Hauer
• Ethernet / SD Boot   Marc Zyngier
• [PATCH v2] scripts: add ARM support to decodecode   Rabin Vincent
• [PATCH v2] scripts: add ARM support to decodecode   Arjan van de Ven
• [PATCH 2/2] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module   Mark Brown
• [PATCH v2] scripts: add ARM support to decodecode   Michal Marek
• [PATCH 2/2] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module   Sascha Hauer
• SMP issues on ARM11 MPCore   mkl lin
• [PATCH 1/2] mx31ads: Provide a name for EXPIO interrupt chip   Mark Brown
• [PATCH 2/2] mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module   Mark Brown
• [PATCH 0/5] V7/Cortex/omap34xx fixes for 2.6.33-rc1: DCC, kexec, atags   Tony Lindgren
• [PATCH v2] scripts: add ARM support to decodecode   Russell King - ARM Linux
• [PATCH 0/5] V7/Cortex/omap34xx fixes for 2.6.33-rc1: DCC, kexec, atags   Paul Walmsley
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Will Deacon
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v2)   Leif Lindholm
• [PATCH 1/4] mfd: mc13783: Take care of semantic inversion between read and write value of two bits in POWER_MISCELLANEUS register.   Samuel Ortiz
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jean Pihet
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v3)   Leif Lindholm
• [patch v3] Valid relocation symbol for FLAT format on ARM   Jun Sun
• [PATCH] add PATA host controller support for Cirrus Logic's EP93xx CPUs   Bartlomiej Zolnierkiewicz
• [PATCH 3/5] arm: use the spinlocked, generic atomic64 support   Jamie Lokier
• [PATCH 3/5] arm: use the spinlocked, generic atomic64 support   Jamie Iles
• [PATCH v2] scripts: add ARM support to decodecode   Daniel Jacobowitz
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v3)   Jamie Lokier
• 2.6.32: I2C Problem on Samsung S3C2410   Davide Rizzo
• [PATCH 1/4] mfd: mc13783: Take care of semantic inversion between read and write value of two bits in POWER_MISCELLANEUS register.   Uwe Kleine-König
• [PATCH] omap: Remove uninitialized warning for gpio.c   Tony Lindgren
• [patch-v2.6.33-rc2+ 10/12] arm: omap: gpio: kill compile warning in gpio.c   Tony Lindgren
• [patch-v2.6.33-rc2+ 06/12] arm: omap: kill compile warning in irq.c   Tony Lindgren
• [PATCH 0/5] V7/Cortex/omap34xx fixes for 2.6.33-rc1: DCC, kexec, atags   Tony Lindgren
• tree with htc dream support   Daniel Walker
• [PATCH 1/2] Update ep93xx/ts72xx to use generic platform nand driver   H Hartley Sweeten
• [PATCH 2/2] Remove now-defunct ts7250 nand driver   H Hartley Sweeten
• [PATCH] ep93xx: register the pwm devices on the edb93xx dev boards   H Hartley Sweeten
• [PATCH v2] scripts: add ARM support to decodecode   Simon Horman
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jamie Iles
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Russell King - ARM Linux
• [PATCH] ARM: OMAP4 clock domains : Add the missing Clock Domain Structure   Paul Walmsley
• [PATCH] ARM: OMAP4 clock framework: Remove the checks preventing OMAP4 clockdomain validation   Paul Walmsley
• [PATCH] Update U300 defconfig   Linus Walleij
• [PATCH 1/1] ARM: OMAP4: PM: Add check for avoiding dependency related update.   Paul Walmsley
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jamie Iles
• [PATCH] ep93xx: register the pwm devices on the ts-72xx dev boards   Matthieu Crapet
• [PATCH] stack2core: show stack message and convert it to core file when kernel die   Hui Zhu
• sharp c-3000 aka spitz: fix warn_on introduced in 2.6.32-rc1   Pavel Machek
• sharp c-3000 aka spitz: fix warn_on introduced in 2.6.32-rc1   Eric Miao
• [PATCH 1/1] ARM: OMAP4: PM: Add check for avoiding dependency related update.   Pagare, Abhijit
• [PATCH 1/2] Remove unneeded __init from s3c24xx_ts_set_platdata   Nelson Castillo
• [PATCH 2/2] Remove unneeded __init for s3c_nand_set_platdata   Nelson Castillo
• [PATCH 1/5] arm: provide a mechanism to reserve performance counters   Michał Nazarewicz
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Will Deacon
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jamie Iles
• [PATCH 1/5] arm: provide a mechanism to reserve performance counters   Jamie Iles
• Arm linux Asymmetric multicore programming   Catalin Marinas
• [Patch v4] OMAP: sDMA driver: descriptor autoloading feature   Adrian Hunter
• [PATCH 2/2] Remove now-defunct ts7250 nand driver   David Woodhouse
• [PATCH 1/3] mmp: fix the clock rate of mmp2   Haojian Zhuang
• [PATCH 2/3] mmp: fix irq handling in mmp2   Haojian Zhuang
• [PATCH 3/3] mmp: support jasper development board   Haojian Zhuang
• [RFC][PATCH] uncompress: use correct cache configuration for ARM11[57]6 and 11MP   Marc Zyngier
• [Patch v4] OMAP: sDMA driver: descriptor autoloading feature   Venkatraman S
• [PATCH] ARM: Fix the reset logic for ARM RealView boards   Colin Tuckley
• Perf Event support for ARMv7 (was: Re: [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6)   Michał Nazarewicz
• Perf Event support for ARMv7 (was: Re: [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6)   Jamie Iles
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v3)   Catalin Marinas
• [PATCH 02/11] arm: use generic infrastructure for early params   Russell King - ARM Linux
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v3)   Russell King - ARM Linux
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v3)   Catalin Marinas
• [PATCH 1/2] Remove unneeded __init from s3c24xx_ts_set_platdata   Uwe Kleine-König
• [PATCH 2/2] Remove now-defunct ts7250 nand driver   H Hartley Sweeten
• [PATCH 1/2] Remove unneeded __init from s3c24xx_ts_set_platdata   Nelson Castillo
• [PATCH 2/2] Remove now-defunct ts7250 nand driver   David Woodhouse
• [PATCH 2/2] Remove now-defunct ts7250 nand driver   H Hartley Sweeten
• [RFC PATCH 2/2] ARM: VFP: preserve the HW context when calling signal handlers   Imre Deak
• Sending UTF-8 patches (was: [PATCH 2/2] Remove now-defunct ts7250 nand driver)   Jamie Lokier
• [GIT PULL] davinci platform fixes for 2.6.33-rc4   Kevin Hilman
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v3)   Jamie Lokier
• [PATCH 00/35] davinci updates queued for 2.6.34   Kevin Hilman
• [PATCH 01/35] davinci: da8xx/omapl1: add support for the second sysconfig module   Kevin Hilman
• [PATCH 02/35] davinci: move PLL wait time values to clock.h   Kevin Hilman
• [PATCH 03/35] davinci: move DDR2 controller defines to memory.h   Kevin Hilman
• [PATCH 04/35] davinci: move PSC register definitions from psc.c to psc.h   Kevin Hilman
• [PATCH 05/35] davinci: make it possible to include clock.h and psc.h in assembly code   Kevin Hilman
• [PATCH 06/35] davinci: cpuidle: move mapping of DDR2 controller registers out of driver   Kevin Hilman
• [PATCH 07/35] davinci: da850/omap-l138: unlock PLL registers during init   Kevin Hilman
• [PATCH 08/35] davinci: da850/omap-l138: create static map for SRAM   Kevin Hilman
• [PATCH 09/35] davinci: explain CLOCK_TICK_RATE of 27MHz in include/mach/timex.h   Kevin Hilman
• [PATCH 10/35] davinci: board-dm646x-evm.c: arrange related code together   Kevin Hilman
• [PATCH 11/35] davinci: add support for DM6467T EVM   Kevin Hilman
• [PATCH 12/35] davinci: clock framework: remove spinlock usage   Kevin Hilman
• [PATCH 13/35] davinci: make /proc/davinci_clocks display multi-rooted clock tree   Kevin Hilman
• [PATCH 14/35] davinci: move /proc/davinci_clocks to debugfs   Kevin Hilman
• [PATCH 15/35] davinci: da850/omap-l138: Modify NOR partition info   Kevin Hilman
• [PATCH 16/35] davinci: da850/omap-l138: Enable 4-bit ecc   Kevin Hilman
• [PATCH 17/35] TI Davinci EMAC : Re-use driver for other platforms.   Kevin Hilman
• [PATCH 18/35] TI Davinci EMAC : add platform specific interrupt enable/disable logic.   Kevin Hilman
• [PATCH 19/35] TI Davinci EMAC : Abstract Buffer address translation logic.   Kevin Hilman
• [PATCH 20/35] davinci: clock: Check CLK_PSC flag before disabling PSC   Kevin Hilman
• [PATCH 21/35] DaVinci: DM365: Changing default queue for DM365.   Kevin Hilman
• [PATCH 22/35] davinci: add power management support   Kevin Hilman
• [PATCH 23/35] davinci: da850/omap-l138: add support for SoC suspend   Kevin Hilman
• [PATCH 24/35] davinci: da850/omap-l138 EVM: register for suspend support   Kevin Hilman
• [PATCH 25/35] davinci: add support for CDCE949 clock synthesizer   Kevin Hilman
• [PATCH 26/35] davinci: add CDCE949 support on DM6467 EVM   Kevin Hilman
• [PATCH 27/35] davinci: Correct return value of edma_alloc_channel api   Kevin Hilman
• [PATCH 28/35] davinci: Keep count of channel controllers on a platform   Kevin Hilman
• [PATCH 29/35] davinci: Fix edma_alloc_channel api for EDMA_CHANNEL_ANY case   Kevin Hilman
• [PATCH 30/35] davinci: build list of unused EDMA events dynamically   Kevin Hilman
• [PATCH 31/35] davinci: support for EDMA resource sharing   Kevin Hilman
• [PATCH 32/35] davinci: da8xx/omap-l1xx: Add EDMA platform data for da850/omap-l138   Kevin Hilman
• [PATCH 33/35] davinci: da830/omapl137: Specify reserved channels/slots   Kevin Hilman
• [PATCH 34/35] davinci: da850/omapl138: Specify reserved channels/slots   Kevin Hilman
• [PATCH 35/35] davinci: dm646x: Specify reserved EDMA channel/slots for DM646x   Kevin Hilman
• Sending UTF-8 patches (was: [PATCH 2/2] Remove now-defunct ts7250 nand driver)   David Woodhouse
• Sending UTF-8 patches (was: [PATCH 2/2] Remove now-defunct ts7250 nand driver)   Nicolas Pitre
• Sending UTF-8 patches (was: [PATCH 2/2] Remove now-defunct ts7250 nand driver)   Nicolas Pitre
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v3)   Leif Lindholm
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v3)   Russell King - ARM Linux
• [PATCH 0/5] OMAP clock/OPP/SDRC fixes for 2.6.33-rc   Paul Walmsley
• [PATCH 1/5] OMAP1 clock: remove __initdata from struct clk_functions to prevent crash   Paul Walmsley
• [PATCH 2/5] OMAP2xxx clock: clk2xxx.c doesn't compile if CPUFREQ is enabled   Paul Walmsley
• [PATCH 3/5] OMAP2xxx OPP: clean up comments in OPP data   Paul Walmsley
• [PATCH 4/5] OMAP2 clock: dynamically allocate CPUFreq frequency table   Paul Walmsley
• [PATCH 5/5] OMAP clock/CPUFreq: avoid leaking the CPUFreq frequency table   Paul Walmsley
• [PATCH 1/1] ARM: OMAP4: PM: Add check for avoiding dependency related update.   Paul Walmsley
• [PATCH] [ARM] mmp: fix the clock rate of mmp2   Haojian Zhuang
• [PATCH] [ARM] mmp: fix irq handling in mmp2   Haojian Zhuang
• [PATCH] [ARM] mmp: support jasper development board   Haojian Zhuang
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v3)   Jamie Lokier
• [PATCH] ARM: add missing parentheses   Roel Kluin
• [PATCH 02/11] arm: use generic infrastructure for early params   Jeremy Kerr
• [PATCH] Fix spelling in comments and documentation   Stefan Weil
• Sending UTF-8 patches (was: [PATCH 2/2] Remove now-defunct ts7250 nand driver)   Jamie Lokier
• Sending UTF-8 patches (was: [PATCH 2/2] Remove now-defunct ts7250 nand driver)   David Woodhouse
• [PATCH] Fix spelling in comments and documentation   Andrew Morton
• Sending UTF-8 patches (was: [PATCH 2/2] Remove now-defunct ts7250 nand driver)   Jamie Lokier
• [PATCH] Fix spelling in comments and documentation   Jiri Kosina
• Sending UTF-8 patches (was: [PATCH 2/2] Remove now-defunct ts7250 nand driver)   Jamie Lokier
• Sending UTF-8 patches (was: [PATCH 2/2] Remove now-defunct ts7250 nand driver)   David Woodhouse
• Sending UTF-8 patches (was: [PATCH 2/2] Remove now-defunct ts7250 nand driver)   David Woodhouse
• [PATCH 00/12] Omap fixes for 2.6.33-rc3   Tony Lindgren
• [PATCH 01/12] omap: McBSP: Fix possible port lockout   Tony Lindgren
• [PATCH 02/12] omap: gpio: Simultaneously requested rising and falling edge   Tony Lindgren
• [PATCH 03/12] omap: &&/|| confusion in iommu_put()   Tony Lindgren
• [PATCH 04/12] omap: Remove uninitialized warning for gpio.c   Tony Lindgren
• [PATCH 05/12] omap1: Add 7xx clocks and pin muxes for SPI   Tony Lindgren
• [PATCH 06/12] omap1: Fix compile for omap1_bl.c   Tony Lindgren
• [PATCH 07/12] omap2/3: make serial_in_override() address the right uart port   Tony Lindgren
• [PATCH 08/12] omap2/3: ZOOM: Correcting key mapping for few keys   Tony Lindgren
• [PATCH 09/12] omap3: add missing parentheses   Tony Lindgren
• [PATCH 10/12] omap3: add missing parentheses   Tony Lindgren
• [PATCH 11/12] omap3: Fix booting if package is uninitialized   Tony Lindgren
• [PATCH 12/12] omap3: EVM: Choose OMAP_PACKAGE_CBB   Tony Lindgren
• [PATCH] arch/arm: Fix build failure for lpd7a404_defconfig caused by missing includes   Peter Huewe
• [PATCH v2 0/5] OMAP clock/OPP fixes for 2.6.33-rc   Paul Walmsley
• [PATCH v2 1/5] OMAP1 clock: remove __initdata from struct clk_functions to prevent crash   Paul Walmsley
• [PATCH v2 2/5] OMAP2xxx clock: clk2xxx.c doesn't compile if CPUFREQ is enabled   Paul Walmsley
• [PATCH v2 3/5] OMAP2xxx OPP: clean up comments in OPP data   Paul Walmsley
• [PATCH v2 4/5] OMAP clock/CPUFreq: add clk_exit_cpufreq_table()   Paul Walmsley
• [PATCH v2 5/5] OMAP2 clock: dynamically allocate CPUFreq frequency table   Paul Walmsley
• [PATCH] omap1: Add 7xx clocks and pin muxes for SPI   Cory Maccarrone
• [PATCH] arch/arm: Fix build failure for defconfigs without CONFIG_ISA_DMA_API set   Peter Huewe
• [PATCH 1/3] mmp: fix the clock rate of mmp2   Eric Miao
• [PATCH 2/3] mmp: fix irq handling in mmp2   Eric Miao
• [PATCH 0/3] Base patches for ARM devicetree groundwork   Jeremy Kerr
• [PATCH 1/3] arm: use generic infrastructure for early params   Jeremy Kerr
• [PATCH 2/3] arm: change command_line to cmd_line, and export it   Jeremy Kerr
• [PATCH 3/3] arm: export arm_add_memory   Jeremy Kerr
• time question   rainbowczj rainbowczj
• [PATCH 1/1] ARM: OMAP4: PM: Add check for avoiding dependency related update.   Pagare, Abhijit
• [PATCH 1/1] ARM: OMAP4: PM: Add check for avoiding dependency related update.   Paul Walmsley
• sharp c-3000 aka spitz: fix warn_on introduced in 2.6.32-rc1   Pavel Machek
• sharp c-3000 aka spitz: fix warn_on introduced in 2.6.32-rc1   Eric Miao
• [PATCH v3] ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate clean lines   Shilimkar, Santosh
• [PATCH] ARM: include needed linux/cpu.h in asm/cpu.h   Shilimkar, Santosh
• [Patch v4] OMAP: sDMA driver: descriptor autoloading feature   adrian.hunter at nokia.com
• [Patch v4] OMAP: sDMA driver: descriptor autoloading feature   Shilimkar, Santosh
• [Patch v4] OMAP: sDMA driver: descriptor autoloading feature   S, Venkatraman
• [PATCH 05/12] omap1: Add 7xx clocks and pin muxes for SPI   Grazvydas Ignotas
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v3)   Catalin Marinas
• SMP issues on ARM11 MPCore   Dirk Behme
• 2.6.32: I2C Problem on S3C2410   Davide Rizzo
• [PATCH 3/3] mmp: support jasper development board   Eric Miao
• SMP issues on ARM11 MPCore   Dirk Behme
• [PATCH 2/2] ARM U8500: add I2C platform configurations   srinidhi kasagar
• SMP issues on ARM11 MPCore   Russell King - ARM Linux
• SMP issues on ARM11 MPCore   Uwe Kleine-König
• Perf Event support for ARMv7 (was: Re: [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6)   Michał Nazarewicz
• [PATCH 05/12] omap1: Add 7xx clocks and pin muxes for SPI   Tony Lindgren
• [PATCH v2 02/09] mfd: support 88pm8606 in 860x driver   Samuel Ortiz
• [PATCH v2 08/09] input: enable touch on 88pm860x   Samuel Ortiz
• [PATCH v2 08/09] input: enable touch on 88pm860x   Dmitry Torokhov
• [patch] fix strange characters in zaurus gpio .desc   Pavel Machek
• [PATCH] arch/arm/common/vic.c: code reorganization   Linus Walleij
• [patch] fix strange characters in zaurus gpio .desc   Stanislav Brabec
• [PATCH] arch/arm/common/vic.c: code reorganization   H Hartley Sweeten
• [RFC,PATCH 1/7] arm: add a common struct clk   Jeremy Kerr
• [RFC,PATCH 2/7] arm: generic support for fixed-rate clocks   Jeremy Kerr
• [RFC,PATCH 3/7] arm/versatile: use generic struct clk   Jeremy Kerr
• [RFC,PATCH 4/7] arm/versatile: remove oscoff from clk_versatile   Jeremy Kerr
• [RFC,PATCH 5/7] arm/realview: use generic struct clk   Jeremy Kerr
• [RFC, PATCH 6/7] arm/icst307: use common struct clk, unify realview and versatile clocks   Jeremy Kerr
• [RFC,PATCH 7/7] arm/icst307: remove icst307_ps_to_vco   Jeremy Kerr
• [PATCH 1/4] mfd: enable max8925   Samuel Ortiz
• [RFC,PATCH 1/7] arm: add a common struct clk   H Hartley Sweeten
• [RFC, PATCH 6/7] arm/icst307: use common struct clk, unify realview and versatile clocks   H Hartley Sweeten
• [RFC,PATCH 1/7] arm: add a common struct clk   Benjamin Herrenschmidt
• [RFC,PATCH 1/7] arm: add a common struct clk   Jeremy Kerr
• [RFC, PATCH 6/7] arm/icst307: use common struct clk, unify realview and versatile clocks   Jeremy Kerr
• [RFC,PATCH 1/7] arm: add a common struct clk   Jeremy Kerr
• [patch] fix strange characters in zaurus gpio .desc   Eric Miao
• [patch] fix strange characters in zaurus gpio .desc   Eric Miao
• [GIT PULL] pxa: 5 more fixes for v2.6.33-rc2   Eric Miao
• Please pull bjdooks' for-linus/samsung   Ben Dooks
• Samsung SoC clock updates   Ben Dooks
• [S3C-CLK] ARM: S3C64XX: Fix possible clock look in EPLL and MPLL clock chains   Ben Dooks
• [S3C-CLK] ARM: SAMSUNG: Move <plat/clock.h> to plat-samsung   Ben Dooks
• [S3C-CLK] ARM: S3C64XX: Cleanup common init code in s3c6400-clock.c   Ben Dooks
• [S3C-CLK] ARM: S3C64XX: Compress s3c6400-clock.c code   Ben Dooks
• [S3C-CLK] ARM: SAMSUNG: Add core clock implementation for clksrc based clocks   Ben Dooks
• [S3C-CLK] ARM: S3C64XX: Use new clock-clksrc.c code for clocks.   Ben Dooks
• [S3C-CLK] ARM: S3C64XX: Remove unused clock definitions from clock header   Ben Dooks
• [S3C-CLK] ARM: SAMSUNG: Reduce size of struct clk.   Ben Dooks
• [S3C-CLK] ARM: S3C64XX: Fixup .reg_src and .reg_div with named initialisers   Ben Dooks
• [S3C-CLK] ARM: S3C64XX: Avoid announcing clksrc clocks twice   Ben Dooks
• [S3C-CLK] ARM: SAMSUNG: Move clock.c to arch/arm/plat-samsung   Ben Dooks
• [S3C-CLK] ARM: SAMSUNG: Do not allow get/set/round rate calls with no divider   Ben Dooks
• [S3C-CLK] ARM: SAMSUNG: Add call to register array of clocks   Ben Dooks
• [S3C-CLK] ARM: SAMSUNG: Do not register set_parent call if no source   Ben Dooks
• Samsung SoC common code updates   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move pwm-clock code into plat-samsung   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move device definitions in plat-samsung   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move gpio-config.c into plat-samsung   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move IRQ VIC timer handling out to common header files   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move IRQ UART handling for newer devices to plat-samsung   Ben Dooks
• [PATCH] ARM: Add common entry code for system with two VICs   Ben Dooks
• [RFC,PATCH 1/7] arm: add a common struct clk   Jeremy Kerr
• [PATCH v2 02/09] mfd: support 88pm8606 in 860x driver   Haojian Zhuang
• [PATCH v2 02/09] mfd: support 88pm8606 in 860x driver   Haojian Zhuang
• [PATCH 8/8] S3C64xx: add support to the RTC driver   Ben Dooks
• [PATCH] [ARM] [S3C64XX] Add support for hr timer   Ben Dooks
• GPIO update to allow code to get at gpio_chip   Ben Dooks
• [PATCH] gpiolib: add gpio_lookup_chip() to get chip information for gpio   Ben Dooks
• [PATCH] gpiolib: add gpio_lookup_chip() to get chip information for gpio   Eric Miao
• Please pull bjdooks' for-linus/samsung   Paulius Zaleckas
• [PATCH] gpiolib: add gpio_lookup_chip() to get chip information for gpio   Ben Dooks
• Please pull bjdooks' for-linus/samsung   Ben Dooks
• [PATCH 1/1] pxa168: avenergs lite board bring up   Haojian Zhuang
• S3C2440 : DM9000 link down when writing on NAND flash   Julien Vermillard
• S3C2440 : DM9000 link down when writing on NAND flash   Lothar Waßmann
• Module Compilation Error in linux-2.6.15 using floating point   jyothi
• [RFC,PATCH 1/7] arm: add a common struct clk   Russell King - ARM Linux
• Module Compilation Error in linux-2.6.15 using floating point   Russell King - ARM Linux
• Module Compilation Error in linux-2.6.15 using floating point   Lothar Waßmann
• [RFC,PATCH 1/7] arm: add a common struct clk   Benjamin Herrenschmidt
• [PATCH v2 0/2] I2C driver support for Nomadik/Ux500   srinidhi kasagar
• [PATCH 1/2] ARM nomadik: add platform specific i2c configuration structures   srinidhi kasagar
• [PATCH 1/4] mfd: enable max8925   Haojian Zhuang
• [PATCH 1/4] mfd: mc13783: Take care of semantic inversion between read and write value of two bits in POWER_MISCELLANEUS register.   Alberto Panizzo
• [PATCH v2 06/09] backlight: enable backlight in 88pm860x   Samuel Ortiz
• [PATCH 2/4] mfd: mc13783: When probing, unlock the mc13783 before subsystems initialisation.   Alberto Panizzo
• [RFC,PATCH 1/7] arm: add a common struct clk   Russell King - ARM Linux
• [PATCH 2/4] mfd: mc13783: When probing, unlock the mc13783 before subsystems initialisation.   Samuel Ortiz
• [RFC,PATCH 1/7] arm: add a common struct clk   Benjamin Herrenschmidt
• [PATCH 1/4] mfd: enable max8925   Samuel Ortiz
• [PATCH v2 02/09] mfd: support 88pm8606 in 860x driver   Samuel Ortiz
• [PATCH] ARM: OMAP4: Power Domains: Remove the return as power domain framework is in place   Abhijit Pagare
• [PATCH v2 06/09] backlight: enable backlight in 88pm860x   Richard Purdie
• [RFC,PATCH 1/7] arm: add a common struct clk   Russell King - ARM Linux
• SMP issues on ARM11 MPCore   Dirk Behme
• [PATCH 1/1] pxa168: avenergs lite board bring up   Eric Miao
• [PATCH] ARM: OMAP4: Power Domains: Remove the return as power domain framework is in place   Aguirre, Sergio
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v3)   Jamie Lokier
• [PATCH] [ARM] pxa168: avengers lite board bring up   Haojian Zhuang
• SMP issues on ARM11 MPCore   mkl lin
• [PATCH] SMDK6410: Set up interrupt range for WM835x on 1190-EV1 PMIC board   Mark Brown
• [PATCH 00/20] imx cleanup series   Uwe Kleine-König
• [PATCH 01/25] imx/mx2: fold crm_regs.h into its only consumer   Uwe Kleine-König
• [PATCH 02/25] imx/clock-imx21: use a macro to define registers   Uwe Kleine-König
• [PATCH 03/25] imx/clock-imx27: use a macro to define registers   Uwe Kleine-König
• [PATCH 04/25] imx/mach-mx2: use constants namespaced by the corresponding SOC (easy part)   Uwe Kleine-König
• [PATCH 05/25] imx/mach-mx3: use constants namespaced by the corresponding SOC (easy part)   Uwe Kleine-König
• [PATCH 06/25] imx/mx3: rename clock.c and iomux.c to {clock, iomux}-imx31.c   Uwe Kleine-König
• [PATCH 07/25] imx/mx1: add newline at end of Makefile   Uwe Kleine-König
• [PATCH 08/25] imx/mx1: rename files defining a machine to mach-$mach.c   Uwe Kleine-König
• [PATCH 09/25] imx: rename Kconfig symbol for "Eukrea CPUIMX27 module"   Uwe Kleine-König
• [PATCH 10/25] imx: rename Kconfig symbol for "LogicPD MX27 LITEKIT platform"   Uwe Kleine-König
• [PATCH 11/25] imx/mx2: rename files defining a machine to mach-$mach.c   Uwe Kleine-König
• [PATCH 12/25] imx/mx3: rename files defining a machine to mach-$mach.c   Uwe Kleine-König
• [PATCH 13/25] imx: provide helper macro to define IO_ADDRESS   Uwe Kleine-König
• [PATCH 14/25] imx21: define and use MX21_IO_ADDRESS   Uwe Kleine-König
• [PATCH 15/25] imx27: define and use MX27_IO_ADDRESS   Uwe Kleine-König
• [PATCH 16/25] imx31: define and use MX31_IO_ADDRESS   Uwe Kleine-König
• [PATCH 17/25] imx25: redefine MX25_IO_ADDRESS using IMX_IO_ADDRESS   Uwe Kleine-König
• [PATCH 18/25] imx35: define and use MX35_IO_ADDRESS   Uwe Kleine-König
• [PATCH 19/25] mx3/kzm_arm11_01: define and use board specific IO_ADDRESS macro   Uwe Kleine-König
• [PATCH 20/25] imx: mangle addresses after adding the offset   Uwe Kleine-König
• [PATCH 21/25] imx: only define deprecated symbols conditionally   Uwe Kleine-König
• [PATCH 22/25] imx: remove mx1ads defconfig   Uwe Kleine-König
• [PATCH 23/25] imx: remove unneeded include of mach/hardware.h   Uwe Kleine-König
• [PATCH 24/25] imx: properly protect mach/mx{1, [25][157x]}.h from multiple inclusion   Uwe Kleine-König
• [PATCH 25/25] imx: define functions to configure chip selects in the WEIM   Uwe Kleine-König
• [alsa-devel] [PATCH 1/3] ASoC: Add a new imx-ssi sound driver   Mark Brown
• [RFC,PATCH 1/7] arm: add a common struct clk   H Hartley Sweeten
• [PATCH] arch/arm: Fix build failure for defconfigs without CONFIG_ISA_DMA_API set   Russell King - ARM Linux
• [PATCH] arch/arm: Fix build failure for lpd7a404_defconfig caused by missing includes   Russell King - ARM Linux
• [PATCH] ARM: include needed linux/cpu.h in asm/cpu.h   Russell King - ARM Linux
• [PATCH 1/3] arm: use generic infrastructure for early params   Russell King - ARM Linux
• [PATCH 2/3] arm: change command_line to cmd_line, and export it   Russell King - ARM Linux
• [PATCH 3/3] arm: export arm_add_memory   Russell King - ARM Linux
• [PATCH] ARM: Add atomic64 routines for ARMv6k and above.   Russell King - ARM Linux
• [PATCH 12/35] davinci: clock framework: remove spinlock usage   Russell King - ARM Linux
• [PATCH] ARM: Fix the reset logic for ARM RealView boards   Russell King - ARM Linux
• [PATCH] iop: use generic clock mult/shift compute functions   Russell King - ARM Linux
• [PATCH] ixp4xx: implement sched_clock()   Russell King - ARM Linux
• S3C2440 : DM9000 link down when writing on NAND flash   Julien Vermillard
• SMP issues on ARM11 MPCore   George G. Davis
• [GIT PULL] omap fixes for 2.6.33-rc3   Tony Lindgren
• [GIT PULL] omap fixes for 2.6.33-rc3   Linus Torvalds
• [GIT PULL] omap fixes for 2.6.33-rc3   Tony Lindgren
• [GIT PULL] omap fixes for 2.6.33-rc3   Tony Lindgren
• MXC: input: add mxc-keypad driver to support the keypad interface present in the mxc application processors family.   Alberto Panizzo
• [RFC,PATCH 1/7] arm: add a common struct clk   Benjamin Herrenschmidt
• [RFC,PATCH 1/7] arm: add a common struct clk   Benjamin Herrenschmidt
• input: add mxc-keypad driver to support the keypad interface present in the mxc application processors family.   H Hartley Sweeten
• [PATCH] ixp4xx: implement sched_clock()   Krzysztof Halasa
• [PATCH 14/18] ARM: PNX4008: move i2c_adapter structure inside the drivers private data   Kevin Wells
• [GIT PULL] omap fixes for 2.6.33-rc3   Paul Walmsley
• Perf Event support for ARMv7 (was: Re: [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6)   Woodruff, Richard
• [GIT PULL] omap fixes for 2.6.33-rc3   Tony Lindgren
• [PATCH 0/5] V7/Cortex/omap34xx fixes for 2.6.33-rc1: DCC, kexec, atags   Woodruff, Richard
• [GIT PULL] omap fixes for 2.6.33-rc3   Linus Torvalds
• [GIT PULL] omap fixes for 2.6.33-rc3   Tony Lindgren
• [PATCH] armv6: invalidate cache on DMA_FROM_DEVICE/DMA_BIDIRECTIONAL   Woodruff, Richard
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors   Woodruff, Richard
• [PATCH] iop: use generic clock mult/shift compute functions   Dan Williams
• [GIT PULL] omap fixes for 2.6.33-rc3   Stephen Rothwell
• [PATCH] arch/arm: Remove unnecessary semicolons   Joe Perches
• trouble compiling dwalker's for-next tree   Pavel Machek
• [PATCH] arch/arm: Remove unnecessary semicolons   Wolfram Sang
• [PATCH] S3C: Remove unneeded __init symbols   Nelson Castillo
• [PATCH] GTA02: Fix build adding NAND and USB host entries to Kconfig   Nelson Castillo
• [PATCH] ixp4xx: implement sched_clock()   Mikael Pettersson
• [GIT PULL] omap fixes for 2.6.33-rc3   Tony Lindgren
• [PATCH] [OMAP1] Clock fixups for OMAP1 and OMAP7xx   Cory Maccarrone
• [PATCH 05/12] omap1: Add 7xx clocks and pin muxes for SPI   Cory Maccarrone
• [GIT PULL] omap fixes for 2.6.33-rc3, take 2   Tony Lindgren
• [PATCH] arch/arm: Remove unnecessary semicolons   Uwe Kleine-König
• [PATCH] S3C: Remove unneeded __init symbols   Uwe Kleine-König
• Issue in oamp nand driver with 32-bit reads in prefetch mode   Artem Bityutskiy
• [PATCH] serial21285: fix disable_irq-from-interrupt-handler deadlock   Russell King - ARM Linux
• [PATCH] ARM: include needed linux/cpu.h in asm/cpu.h   Russell King - ARM Linux
• [PATCH v2 0/2] I2C driver support for Nomadik/Ux500   Ben Dooks
• [PATCH 14/18] ARM: PNX4008: move i2c_adapter structure inside the drivers private data   Russell King - ARM Linux
• [PATCH 00/35] davinci updates queued for 2.6.34   Russell King - ARM Linux
• [PATCH 3/7] [ARM] locomo: remove unused IRQs and avoid unnecessary cascade   Thomas Kunze
• trouble compiling dwalker's for-next tree   Daniel Walker
• time question   Russell King - ARM Linux
• [PATCH 1/7] [ARM] sa1100: remove unreferenced IRQ definitions   Marek Vasut
• [PATCH] Consolidate clks_register() and similar   Russell King - ARM Linux
• [PATCH 01/12] omap: McBSP: Fix possible port lockout   Janusz Krzysztofik
• [PATCH 3/3] arm: export arm_add_memory   Jeremy Kerr
• [PATCH] Consolidate clks_register() and similar   Jeremy Kerr
• [PATCH 3/3] arm: export arm_add_memory   Russell King - ARM Linux
• [PATCH] Consolidate clks_register() and similar   Russell King - ARM Linux
• [PATCH] ep93xx: use pr_fmt in clock.c   Ryan Mallon
• [PATCH] Consolidate clks_register() and similar   Ben Dooks
• [PATCH] ep93xx: define magic numbers for pll1 and pll2   Ryan Mallon
• [PATCH] ep93xx: use pr_fmt in core.c   Ryan Mallon
• [PATCH] ep93xx: use pr_fmt in dma-m2p.c   Ryan Mallon
• [PATCH] ep93xx: register the pwm devices on the edb93xx dev boards   Ryan Mallon
• [PATCH 3/4] fec: add support for Freescale i.MX25 PDK (3DS)   Greg Ungerer
• [uClinux-dev] [PATCH] error message when FLAT reloc symbol is invalid, v2   Greg Ungerer
• [RFC,PATCH 1/7] arm: add a common struct clk   Jeremy Kerr
• [RFC,PATCH 1/7] arm: add a common struct clk   Jeremy Kerr
• [PATCH] ARM: OMAP4: Power Domains: Remove the return as power domain framework is in place   Pagare, Abhijit
• [PATCH 1/3] OMAP4: PRCM: Define shift macros as n instead of 1 << n   Rajendra Nayak
• [PATCH 2/3] OMAP4: PRCM: Fix the base address for CHIRONSS reg defines   Rajendra Nayak
• [PATCH 3/3] OMAP4: clocks: Fix the clksel_rate struct DPLL divs   Rajendra Nayak
• [PATCH 0/3] OMAP4: prcm/clock fixes   Nayak, Rajendra
• [PATCH] ARM: include needed linux/cpu.h in asm/cpu.h   Shilimkar, Santosh
• Issue in oamp nand driver with 32-bit reads in prefetch mode   Vimal Singh
• [PATCH 1/1] pxa168: avenergs lite board bring up   Haojian Zhuang
• [PATCH]NUC900 LCD Controller Driver   Wang Qiang
• [PATCH v2 06/09] backlight: enable backlight in 88pm860x   Haojian Zhuang
• [PATCH 1/3] ARM: SAMSUNG: Add config option for number of additional GPIO pins.   Kukjin Kim
• [PATCH 2/3] ARM: SAMSUNG: Make clk_default_setrate and clk_ops_def_setrate visible   Kukjin Kim
• [PATCH 3/3] ARM: SAMSUNG: Add idle support   Kukjin Kim
• 21285 serial driver deadlock(?) fix   Simon Kagstrom
• [PATCH 3/3] ARM: SAMSUNG: Add idle support   Russell King - ARM Linux
• [PATCH 1/3] ARM: SAMSUNG: Add config option for number of additional GPIO pins.   Mark Brown
• [PATCH 3/3] ARM: SAMSUNG: Add idle support   Mark Brown
• [RFC,PATCH 1/7] arm: add a common struct clk   Mark Brown
• about usb tablet 2.6.27/2.6.24   tommy tommy
• about usb tablet   tommy.hong
• about usb tablet   tommy tommy
• about usb tablet   tommy
• about usb tablet   Daniel Mack
• [PATCH 1/3] ARM: SAMSUNG: Add config option for number of additional GPIO pins.   Ben Dooks
• [PATCH 1/3] ARM: SAMSUNG: Add config option for number of additional GPIO pins.   Mark Brown
• [RFC PATCH 00/16] pxa gpio API cleanup   Eric Miao
• [PATCH 01/16] [ARM] pxa/tosa: make use of the matrix keypad driver   Eric Miao
• [PATCH 02/16] [ARM] pxa: use chip->ack() instead of accessing GEDR directly   Eric Miao
• [PATCH 03/16] [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms   Eric Miao
• [PATCH 04/16] [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms   Eric Miao
• [PATCH 05/16] [ARM] pxa/cm-x270: avoid direct access of GPIO/MFP registers   Eric Miao
• [PATCH 06/16] [ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26x   Eric Miao
• [PATCH 07/16] [ARM] pxa: remove the unnecessary restoring of MFP registers   Eric Miao
• [PATCH 08/16] [ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()   Eric Miao
• [PATCH 09/16] [ARM] pxa: add the missing AC97 pin configurations   Eric Miao
• [PATCH 10/16] [ARM] pxa: remove now unnecessary pxa_gpio_mode() calls in ac97   Eric Miao
• [PATCH 11/16] gpio: introduce gpio_request_one() and friends   Eric Miao
• [PATCH 12/16] [ARM] pxa/corgi: use generic GPIO API and remove pxa_gpio_mode()   Eric Miao
• [PATCH 13/16] [ARM] pxa/spitz: use generic GPIO API and remove pxa_gpio_mode()   Eric Miao
• [PATCH 14/16] [ARM] pxa: fix irq suspend/resume for pxa25x   Eric Miao
• [PATCH 15/16] [ARM] pxa: add MFP_LPM_KEEP_OUTPUT flag to pin config   Eric Miao
• [PATCH 16/16] [ARM] pxa/corgi: cleanup GPIO configurations and low power mode settings   Eric Miao
• [PATCH v3] ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate clean lines   Catalin Marinas
• [PATCH v3] ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate clean lines   Russell King - ARM Linux
• [PATCH] spinlock: don't use deprecated barriers on ARMv7   Rabin Vincent
• [PATCH v3] ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate clean lines   Shilimkar, Santosh
• [PATCH 05/16] [ARM] pxa/cm-x270: avoid direct access of GPIO/MFP registers   Mike Rapoport
• [PATCH v3] ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate clean lines   Shilimkar, Santosh
• [PATCH v3] ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate clean lines   Russell King - ARM Linux
• [PATCH 12/35] davinci: clock framework: remove spinlock usage   Kevin Hilman
• [PATCH v3] ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate clean lines   Shilimkar, Santosh
• [PATCH 00/35] davinci updates queued for 2.6.34   Kevin Hilman
• [PATCH] imxfb: correct location of callbacks in suspend and resume   Uwe Kleine-König
• [PATCH] davinci: clkdev cleanup: remove clk_lookup wrapper, use clkdev_add_table()   Kevin Hilman
• [PATCH v3] ARM: L2 : Errata 588369: Clean & Invalidate do notinvalidate clean lines   Catalin Marinas
• [PATCH v3] ARM: L2 : Errata 588369: Clean & Invalidate do notinvalidate clean lines   Russell King - ARM Linux
• [PATCH] MXC: Add AUDMUXv2 register decode to debugfs   Mark Brown
• [PATCH] Consolidate clks_register() and similar   H Hartley Sweeten
• [PATCH] Consolidate clks_register() and similar   Russell King - ARM Linux
• [PATCH] imxfb: correct location of callbacks in suspend and resume   Sascha Hauer
• [PATCH] ep93xx: register the pwm devices on the edb93xx dev boards   H Hartley Sweeten
• [PATCH] ep93xx: register the pwm devices on the edb93xx dev boards   H Hartley Sweeten
• [PATCH] ep93xx: define magic numbers for pll1 and pll2   H Hartley Sweeten
• [PATCH] ep93xx: register the pwm devices on the edb93xx dev boards   Ryan Mallon
• [PATCH] ep93xx: define magic numbers for pll1 and pll2   Ryan Mallon
• [RFC,PATCH 1/7] arm: add a common struct clk   Benjamin Herrenschmidt
• Split page tables   Bahadir Balban
• [PATCH] ep93xx: define magic numbers for pll1 and pll2   H Hartley Sweeten
• 32-bit Thumb-2 breakpoints   Daniel Jacobowitz
• [PATCH] Consolidate clks_register() and similar   Kevin Hilman
• 32-bit Thumb-2 breakpoints   Russell King - ARM Linux
• [RFC 00/18] generic arm needed for msm   Daniel Walker
• [RFC 01/18] arm: msm: allow ARCH_MSM to have v7 cpus   Daniel Walker
• [RFC 02/18] arm: msm: add oprofile pmu support   Daniel Walker
• [RFC 03/18] arm: boot: remove old ARM ID for QSD   Daniel Walker
• [RFC 04/18] arm: cache-l2x0: add l2x0 suspend and resume functions   Daniel Walker
• [RFC 05/18] arm: msm: implement ioremap_strongly_ordered   Daniel Walker
• [RFC 06/18] arm: msm: implement proper dmb() for 7x27   Daniel Walker
• [RFC 07/18] arm: mm: retry on QSD icache parity errors   Daniel Walker
• [RFC 08/18] arm: msm: set L2CR1 to enable prefetch and burst on Scorpion.   Daniel Walker
• [RFC 09/18] arm: mm: support error reporting in L1/L2 caches on QSD   Daniel Walker
• [RFC 10/18] arm: mm: enable L2X0 to use L2 cache on MSM7X27   Daniel Walker
• [RFC 11/18] arm: msm: add ARCH_MSM_SCORPION to CPU_V7   Daniel Walker
• [RFC 12/18] arm: msm: Enable frequency scaling.   Daniel Walker
• [RFC 13/18] arm: msm: define HAVE_CLK for ARCH_MSM   Daniel Walker
• [RFC 14/18] arm: msm: add v7 support for compiler version-4.1.1   Daniel Walker
• [RFC 15/18] arm: vfp: Add additional vfp interfaces   Daniel Walker
• [RFC 16/18] arm: msm: add arch_has_speculative_dfetch()   Daniel Walker
• [RFC 17/18] arm: mm: Add SW emulation for ARM domain manager feature   Daniel Walker
• [RFC 18/18] arm: mm: qsd8x50: Fix incorrect permission faults   Daniel Walker
• 32-bit Thumb-2 breakpoints   Daniel Jacobowitz
• [RFC 14/18] arm: msm: add v7 support for compiler version-4.1.1   Russell King - ARM Linux
• 32-bit Thumb-2 breakpoints   Jamie Lokier
• [RFC 18/18] arm: mm: qsd8x50: Fix incorrect permission faults   Russell King - ARM Linux
• [RFC 11/18] arm: msm: add ARCH_MSM_SCORPION to CPU_V7   Russell King - ARM Linux
• 32-bit Thumb-2 breakpoints   Russell King - ARM Linux
• 32-bit Thumb-2 breakpoints   Daniel Jacobowitz
• [RFC 11/18] arm: msm: add ARCH_MSM_SCORPION to CPU_V7   Daniel Walker
• 32-bit Thumb-2 breakpoints   Russell King - ARM Linux
• [RFC 16/18] arm: msm: add arch_has_speculative_dfetch()   Russell King - ARM Linux
• [RFC 05/18] arm: msm: implement ioremap_strongly_ordered   Russell King - ARM Linux
• [RFC 06/18] arm: msm: implement proper dmb() for 7x27   Russell King - ARM Linux
• [PATCH] ARM: OMAP4: Power Domains: Remove the return as power domain framework is in place   Tony Lindgren
• [RFC 04/18] arm: cache-l2x0: add l2x0 suspend and resume functions   Russell King - ARM Linux
• [RFC 06/18] arm: msm: implement proper dmb() for 7x27   Daniel Walker
• [RFC 08/18] arm: msm: set L2CR1 to enable prefetch and burst on Scorpion.   Russell King - ARM Linux
• 32-bit Thumb-2 breakpoints   Daniel Jacobowitz
• [RFC 06/18] arm: msm: implement proper dmb() for 7x27   Russell King - ARM Linux
• [PATCH 3/3] ARM: SAMSUNG: Add idle support   Ben Dooks
• [PATCH] Consolidate clks_register() and similar   Eric Miao
• 32-bit Thumb-2 breakpoints   Jamie Lokier
• [PATCH 1/3] ARM: SAMSUNG: Add config option for number of additional GPIO pins.   Ben Dooks
• 32-bit Thumb-2 breakpoints   Jamie Lokier
• [PATCH 05/16] [ARM] pxa/cm-x270: avoid direct access of GPIO/MFP registers   Eric Miao
• 32-bit Thumb-2 breakpoints   Daniel Jacobowitz
• [RFC 16/18] arm: msm: add arch_has_speculative_dfetch()   Daniel Walker
• [PATCH] Add S3C64XX RTC platform driver   Maurus Cuelenaere
• [PATCH 0/5] Some OMAP clock/SCM patches for 2.6.34   Paul Walmsley
• [PATCH 1/5] AM35xx: Add AM35xx specific control module registers   Paul Walmsley
• [PATCH 2/5] OMAP3 clock: reorganize CK_* platform flags   Paul Walmsley
• [PATCH 3/5] AM35xx: Clock table updates for AM3505/17   Paul Walmsley
• [PATCH 4/5] OMAP clock: make the fixed divisor clock code available for all OMAPs   Paul Walmsley
• [PATCH 5/5] OMAP1 clock: convert armwdt_ck to use the fixed divisor recalc function   Paul Walmsley
• [RFC 04/18] arm: cache-l2x0: add l2x0 suspend and resume functions   Ruan, Willie
• [PATCH 00/10] OMAP2/3/4 clockdomains/powerdomains: split shared dependencies and clean up - for 2.6.34   Paul Walmsley
• [PATCH 01/10] OMAP2/3 clkdm/pwrdm: move wkdep/sleepdep handling from pwrdm to clkdm   Paul Walmsley
• [PATCH 02/10] OMAP2/3 clockdomains: split shared structures so usecounting works   Paul Walmsley
• [PATCH 03/10] OMAP2 clockdomain: modem clockdomain is only present on OMAP2430   Paul Walmsley
• [PATCH 04/10] OMAP clockdomain/powerdomain: remove runtime register/unregister   Paul Walmsley
• [PATCH 05/10] OMAP clockdomains: add usecounting for wakeup and sleep dependencies   Paul Walmsley
• [PATCH 06/10] OMAP2/3/4 clockdomain: add clkdm_clear_all_{wkdep, sleepdep}s()   Paul Walmsley
• [PATCH 07/10] OMAP powerdomain/PM: use symbolic constants for the max number of power states   Paul Walmsley
• [PATCH 08/10] OMAP powerdomain: rearrange struct powerdomain to save some memory   Paul Walmsley
• [PATCH 09/10] OMAP powerdomain: remove pwrdm_clk_state_switch   Paul Walmsley
• [PATCH 10/10] OMAP clockdomain/powerdomain: improve documentation   Paul Walmsley
• [PATCH] Add S3C64XX RTC platform driver   Ben Dooks
• S3C/S5P device updates - request for comments   Ben Dooks
• [PATCH 2/3] ARM: SAMSUNG: Make clk_default_setrate and clk_ops_def_setrate visible   Ben Dooks
• [PATCH 1/1] pxa168: avenergs lite board bring up   Eric Miao
• [RFC,PATCH 0/7 v2] Common struct clk implementation   Jeremy Kerr
• [RFC,PATCH 1/7 v2] Add a common struct clk   Jeremy Kerr
• [RFC,PATCH 2/7 v2] Generic support for fixed-rate clocks   Jeremy Kerr
• [RFC,PATCH 3/7 v2] arm/versatile: use generic struct clk   Jeremy Kerr
• [RFC,PATCH 4/7 v2] arm/versatile: remove oscoff from clk_versatile   Jeremy Kerr
• [RFC,PATCH 5/7 v2] arm/realview: use generic struct clk   Jeremy Kerr
• [RFC, PATCH 6/7 v2] arm/icst307: use common struct clk, unify realview and versatile clocks   Jeremy Kerr
• [RFC,PATCH 7/7 v2] arm/icst307: remove icst307_ps_to_vco   Jeremy Kerr
• [PATCH v3] ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate clean lines   Shilimkar, Santosh
• [RFC,PATCH 1/7] arm: add a common struct clk   Francesco VIRLINZI
• [PATCH] arch/arm/common/vic.c: code reorganization   Linus Walleij
• [PATCH 01/01] regulator: support max8649   Haojian Zhuang
• [RFC,PATCH 1/7 v2] Add a common struct clk   Francesco VIRLINZI
• [PATCH v4 1/8] ARM: S5P6440: Add new CPU initialization support   Kukjin Kim
• [PATCH v4 2/8] ARM: S5P6440: Add Clock and PLL support   Kukjin Kim
• [PATCH v4 3/8] ARM: S5P6440: Add IRQ support   Kukjin Kim
• [PATCH v4 4/8] ARM: S5P6440: Add Timer support   Kukjin Kim
• [PATCH v4 5/8] ARM: S5P6440: Add new Kconfig and Makefiles   Kukjin Kim
• [PATCH v4 6/8] ARM: S5P6440: Add Board support file   Kukjin Kim
• [PATCH v4 7/8] ARM: S5P6440: Add configuration file   Kukjin Kim
• [PATCH v4 8/8] ARM: S5P6440: Add serial port support   Kukjin Kim
• [RFC,PATCH 1/7] arm: add a common struct clk   Benjamin Herrenschmidt
• [PATCH 01/01] regulator: support max8649   Haojian Zhuang
• [PATCH v4 0/8] ARM: S5P6440: Add support for Samsung's S5P6440 SoC   Kukjin Kim
• [RFC 16/18] arm: msm: add arch_has_speculative_dfetch()   Russell King - ARM Linux
• [RFC,PATCH 1/7 v2] Add a common struct clk   Russell King - ARM Linux
• [RFC,PATCH 0/7 v2] Common struct clk implementation   Russell King - ARM Linux
• Samsung SoC clock updates   Russell King - ARM Linux
• [PATCH] ARM: Tidy the use of REALVIEW_SYS_BASE with various OSCn_OFFSET defines   Colin Tuckley
• Split page tables   Catalin Marinas
• [PATCH v2 06/09] backlight: enable backlight in 88pm860x   Richard Purdie
• [PATCH] MXC: Add AUDMUXv2 register decode to debugfs   Sascha Hauer
• 32-bit Thumb-2 breakpoints   Catalin Marinas
• [PATCH] ARM: Support for Embedian MXM-8x10 eval kit   Edwin Peer
• [PATCH 3/3] ARM: SAMSUNG: Add idle support   Russell King - ARM Linux
• 32-bit Thumb-2 breakpoints   Catalin Marinas
• [RFC 08/18] arm: msm: set L2CR1 to enable prefetch and burston Scorpion.   Catalin Marinas
• [PATCH 1/2 RESEND#2] i2c/pxa: remove unused macro   Uwe Kleine-König
• [RFC 08/18] arm: msm: set L2CR1 to enable prefetch and burston Scorpion.   Shilimkar, Santosh
• [RFC 08/18] arm: msm: set L2CR1 to enable prefetch and burston Scorpion.   Russell King - ARM Linux
• [PATCH 01/01] regulator: support max8649   Mark Brown
• [PATCH] Consolidate clks_register() and similar   Russell King - ARM Linux
• [PATCH] arch/arm/common/vic.c: code reorganization   Russell King - ARM Linux
• [PATCH 0/18] PNX4008 patchset (updated with Vitaly's acks, plus a few more patches)   Russell King - ARM Linux
• [RFC 08/18] arm: msm: set L2CR1 to enable prefetch and burstonScorpion.   Catalin Marinas
• [RFC 08/18] arm: msm: set L2CR1 to enable prefetch and burstonScorpion.   Russell King - ARM Linux
• [PATCH 3/3] ARM: SAMSUNG: Add idle support   Ben Dooks
• [RFC,PATCH 1/7 v2] Add a common struct clk   Ben Dooks
• 32-bit Thumb-2 breakpoints   Daniel Jacobowitz
• [RFC,PATCH 1/7 v2] Add a common struct clk   Ben Dooks
• [RFC,PATCH 1/7 v2] Add a common struct clk   Ben Dooks
• [RFC 08/18] arm: msm: set L2CR1 to enable prefetch andburstonScorpion.   Catalin Marinas
• [PATCH 3/3] ARM: SAMSUNG: Add idle support   Russell King - ARM Linux
• [PATCH 1/3] ARM: SAMSUNG: Add config option for number of additional GPIO pins.   Mark Brown
• [RESEND PATCH] genirq: warn about IRQF_SHARED|IRQF_DISABLED at the right place   Uwe Kleine-König
• question about ARM11MP cpu architecture identification   saeed bishara
• [PATCH] regulator: support max8649   Haojian Zhuang
• [RFC,PATCH 3/7 v2] arm/versatile: use generic struct clk   Russell King - ARM Linux
• question about ARM11MP cpu architecture identification   Catalin Marinas
• question about ARM11MP cpu architecture identification   Russell King - ARM Linux
• question about ARM11MP cpu architecture identification   Russell King - ARM Linux
• question about ARM11MP cpu architecture identification   saeed bishara
• question about ARM11MP cpu architecture identification   Catalin Marinas
• [PATCH] Fix wrong dmb   Russell King - ARM Linux
• question about ARM11MP cpu architecture identification   saeed bishara
• question about ARM11MP cpu architecture identification   Russell King - ARM Linux
• 21285 serial driver deadlock(?) fix   Steve M
• question about ARM11MP cpu architecture identification   Russell King - ARM Linux
• question about ARM11MP cpu architecture identification   Russell King - ARM Linux
• [PATCH] Consolidate clks_register() and similar   H Hartley Sweeten
• pxa320: change uart configuration   Judith Baumgarten
• [PATCH] Consolidate clks_register() and similar   Russell King - ARM Linux
• pxa320: change uart configuration   Russell King - ARM Linux
• [PATCH] Consolidate clks_register() and similar   H Hartley Sweeten
• question about ARM11MP cpu architecture identification   Catalin Marinas
• [PATCH] Fix wrong dmb   Catalin Marinas
• [RFC 08/18] arm: msm: set L2CR1 to enable prefetch andburstonScorpion.   Daniel Walker
• [PATCH] Fix wrong dmb   Nicolas Pitre
• [PATCH] Consolidate clks_register() and similar   Russell King - ARM Linux
• Split page tables   Bahadir Balban
• [PATCH] Consolidate clks_register() and similar   Kevin Hilman
• question about ARM11MP cpu architecture identification   Nicolas Pitre
• [RFC 08/18] arm: msm: set L2CR1 to enable prefetch and burston Scorpion.   Nicolas Pitre
• [PATCH 1/3] ARM: SAMSUNG: Add config option for number ofadditional GPIO pins.   H Hartley Sweeten
• Samsung SoC clock updates   Ben Dooks
• Samsung SoC clock updates   Mark Brown
• Samsung SoC clock updates   Ben Dooks
• [PATCH] ep93xx: move gpio interrupt support to gpio.c   H Hartley Sweeten
• [PATCH 3/3] ARM: SAMSUNG: Add idle support   Ben Dooks
• [PATCH] ep93xx: move timer defines into core.c and document   H Hartley Sweeten
• [RFC,PATCH 0/7 v2] Common struct clk implementation   Jeremy Kerr
• [PATCH] ARM: Fix uncompress code compile for different defines of static(void)   Tony Lindgren
• [Linux-arm-nuc900] [PATCH]NUC900 LCD Controller Driver   Wang Qiang
• [RFC 08/18] arm: msm: set L2CR1 to enable prefetch and burstonScorpion.   Shilimkar, Santosh
• [PATCH] arch/arm: Remove unnecessary semicolons   Andrew Victor
• [PATCH 0/7] dma-mapping: Cortex A9 speculative prefetch fixes   muni anda
• 21285 serial driver deadlock(?) fix   Simon Kagstrom
• [PATCH 0/7] dma-mapping: Cortex A9 speculative prefetch fixes   Russell King - ARM Linux
• [PATCH] ARM: Fix uncompress code compile for different defines of static(void)   Uwe Kleine-König
• Split page tables   Catalin Marinas
• [RFC 08/18] arm: msm: set L2CR1 to enable prefetch andburstonScorpion.   Catalin Marinas
• question about ARM11MP cpu architecture identification   saeed bishara
• question about ARM11MP cpu architecture identification   Russell King - ARM Linux
• Possible suspend/resume regression in .32-rc?   Daniel Mack
• Samsung SoC clock updates   Mark Brown
• [PATCH] ARM: Make raumfeld.c compile   Daniel Mack
• [PATCH] ARM: Make raumfeld.c compile   Eric Miao
• Fwd: DesignWare DMA Controller on at91sam9263   Valentin Sitdikov
• [PATCH] ARM: Make raumfeld.c compile   Daniel Mack
• [PATCH] arch/arm/common/vic.c: code reorganization   Alessandro Rubini
• DesignWare DMA Controller on at91sam9263   Nicolas Ferre
• Possible suspend/resume regression in .32-rc?   Stanislav Brabec
• [PATCH 1/3] [ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus   Eric Miao
• [PATCH 2/3] [ARM] pxa: fix the incorrect naming of AC97 reset pin config for pxa26x   Eric Miao
• [PATCH 3/3] [ARM] pxa: fix irq suspend/resume for pxa25x   Eric Miao
• [PATCH 2.6.33] SMDK6410: Specify no GPIO for B_PWR_5V regulator   Mark Brown
• kernel boot failure on with s32440/mini2440 with git head (dd59f6c76b2)   Uri Yosef
• [PATCH] ARM: Fix uncompress code compile for different defines of static(void)   Uwe Kleine-König
• [PATCH] S3C: Remove unneeded __init symbols   Nelson Castillo
• [PATCH] S3C: Remove unneeded __init symbols   Uwe Kleine-König
• [PATCH] S3C: Remove unneeded __init symbols   Nelson Castillo
• [PATCH - 2nd attempt] ARM: Support for Embedian MXM-8x10 eval kit   Edwin Peer
• Possible suspend/resume regression in .32-rc?   Greg KH
• [PATCH] S3C: Remove unneeded __init symbols   Uwe Kleine-König
• [PATCH] spinlock: don't use deprecated barriers on ARMv7   Rabin Vincent
• [RFC PATCH 2/2] ARM: VFP: preserve the HW context when callingsignal handlers   Catalin Marinas
• [PATCH - 2nd attempt] ARM: Support for Embedian MXM-8x10 eval kit   Russell King - ARM Linux
• [RFC PATCH 2/2] ARM: VFP: preserve the HW context when callingsignal handlers   Imre Deak
• [PATCH] ARM: Fix uncompress code compile for different defines of static(void)   Tony Lindgren
• [PATCH] S3C: NAND: Check the existence of nr_map before copying   Ramax Lo
• [PATCH] ARM: Fix uncompress code compile for different definesof static(void)   H Hartley Sweeten
• [PATCH] Offer 'uncacheable memory' as DMA coherent memory for ARMv6   Aguirre, Sergio
• [PATCH] S3C: NAND: Check the existence of nr_map before copying   Aguirre, Sergio
• [PATCH] RFC: mx27: Add soc_camera support   Alan Carvalho de Assis
• [PATCH] Offer 'uncacheable memory' as DMA coherent memory for ARMv6   Russell King - ARM Linux
• Question: __ARM_EABI__   H Hartley Sweeten
• [PATCH] Offer 'uncacheable memory' as DMA coherent memory for ARMv6   Aguirre, Sergio
• [PATCH] Revert "[ARM] disable NX support for OABI-supporting kernels"   Rabin Vincent
• Question: __ARM_EABI__   Mikael Pettersson
• Question: __ARM_EABI__   H Hartley Sweeten
• Question: __ARM_EABI__   Russell King - ARM Linux
• Question: __ARM_EABI__   H Hartley Sweeten
• Question: __ARM_EABI__   Russell King - ARM Linux
• Question: __ARM_EABI__   H Hartley Sweeten
• [PATCH 3/3] OMAP4: clocks: Fix the clksel_rate struct DPLL divs   Paul Walmsley
• [PATCH 2/3] OMAP4: PRCM: Fix the base address for CHIRONSS reg defines   Paul Walmsley
• [PATCH 0/3] OMAP4: prcm/clock fixes   Paul Walmsley
• [PATCH 0/3] OMAP4: prcm/clock fixes   Paul Walmsley
• [PATCH] Fix soft lockup in at91 udc driver   Ryan Mallon
• kernel boot failure on with s32440/mini2440 with git head (dd59f6c76b2)   Ben Dooks
• Question: __ARM_EABI__   Mikael Pettersson
• Fwd: [PATCH 0/2] plat-samsung ADC driver   Maurus Cuelenaere
• [PATCH v2 3/3] ARM: SAMSUNG: Add idle support   Kukjin Kim
• [PATCH v5 1/8] ARM: S5P6440: Add new CPU initialization support   Kukjin Kim
• [PATCH v5 2/8] ARM: S5P6440: Add Clock and PLL support   Kukjin Kim
• [PATCH v5 3/8] ARM: S5P6440: Add IRQ support   Kukjin Kim
• [PATCH v5 4/8] ARM: S5P6440: Add Timer support   Kukjin Kim
• [PATCH v5 5/8] ARM: S5P6440: Add new Kconfig and Makefiles   Kukjin Kim
• [PATCH v5 6/8] ARM: S5P6440: Add Board support file   Kukjin Kim
• [PATCH v5 7/8] ARM: S5P6440: Add configuration file   Kukjin Kim
• [PATCH v5 8/8] ARM: S5P6440: Add serial port support   Kukjin Kim
• [PATCH 3/3] ARM: SAMSUNG: Add idle support   Kukjin Kim
• [PATCH v5 0/8] ARM: S5P6440: Add support for Samsung's S5P6440 SoC   Kukjin Kim
• Question: __ARM_EABI__   H Hartley Sweeten
• [PATCH v2 3/3] ARM: SAMSUNG: Add idle support   Ben Dooks
• [PATCH v5 1/8] ARM: S5P6440: Add new CPU initialization support   Ben Dooks
• [PATCH 2.6.33] SMDK6410: Specify no GPIO for B_PWR_5V regulator   Ben Dooks
• [PATCH v5 1/8] ARM: S5P6440: Add new CPU initialization support   Ben Dooks
• [PATCH - 2nd attempt] ARM: Support for Embedian MXM-8x10 eval kit   Eric Miao
• [PATCH] ARM: SAMSUNG: Add system.h file   Kukjin Kim
• [PATCH 1/3] OMAP: omap_device: optionally auto-adjust device activate/deactivate latencies (fwd) - queued for 2.6.34   Paul Walmsley
• [PATCH] ARM: SAMSUNG: Add system.h file   Ben Dooks
• [PATCH] S3C: NAND: Check the existence of nr_map before copying   Ramax Lo
• [PATCH v2] S3C: NAND: Check the existence of nr_map before copying   Ramax Lo
• [PATCH v2] S3C: NAND: Check the existence of nr_map before copying   Ben Dooks
• [PATCH - 2nd attempt] ARM: Support for Embedian MXM-8x10 eval kit   Eric Miao
• [PATCH v2 2/3] ARM: SAMSUNG: Make clk_default_setrate and clk_ops_def_setrate visible   Kukjin Kim
• [PATCH v2 2/3] ARM: SAMSUNG: Make clk_default_setrate and clk_ops_def_setrate visible   Ben Dooks
• [PATCH v5 1/8 RE-SEND] ARM: S5P6440: Add new CPU initialization support   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Add system.h file   Ben Dooks
• [PATCH] ARM: SAMSUNG: Add system.h file   Kukjin Kim
• [PATCH v5 1/8 RE-SEND] ARM: S5P6440: Add new CPU initialization support   Ben Dooks
• [PATCH v5 6/8] ARM: S5P6440: Add Board support file   Ben Dooks
• [PATCH v5 1/8 RE-SEND] ARM: S5P6440: Add new CPU initialization support   Kukjin Kim
• DesignWare DMA Controller on at91sam9263   Valentin Sitdikov
• kernel boot failure on with s32440/mini2440 with git head (dd59f6c76b2)   Gaye Abdoulaye Walsimou
• [PATCH v5 1/8 RE-SEND-2] ARM: S5P6440: Add new CPU initialization support   Kukjin Kim
• [PATCH v5 6/8 RE-SEND] ARM: S5P6440: Add Board support file   Kukjin Kim
• [PATCH] RFC: mx27: Add soc_camera support   javier Martin
• kernel boot failure on with s32440/mini2440 with git head (dd59f6c76b2)   Uri Yosef
• [PATCH] ARM: Fix uncompress code compile for different definesof static(void)   Uwe Kleine-König
• kernel boot failure on with s32440/mini2440 with git head (dd59f6c76b2)   Abdoulaye Walsimou Gaye
• [PATCH - 2nd attempt] ARM: Support for Embedian MXM-8x10 eval kit   Russell King - ARM Linux
• [PATCH] ARM: Fix uncompress code compile for different definesof static(void)   Russell King - ARM Linux
• [PATCH 0/3] mx25: NAND support   Baruch Siach
• [PATCH 1/3] mtd: mxc_nand: add MX25 to Kconfig   Baruch Siach
• [PATCH 2/3] mx25: add NAND support   Baruch Siach
• [PATCH 3/3] mx25pdk: add NAND device support   Baruch Siach
• [PATCH 2.6.33] SMDK6410: Specify no GPIO for B_PWR_5V regulator   Mark Brown
• [PATCH] ARM: MINI2440: Fix mini2440 crash on boot due to improper __initdata qualifier   Uri Yosef
• [PATCH 00/20] imx cleanup series   Sascha Hauer
• [PATCH 0/3] mx25: NAND support   Sascha Hauer
• [PATCH] ARM: MINI2440: Fix mini2440 crash on boot due to improper __initdata qualifier   Ben Dooks
• [PATCH 0/5] Adding x86-like memory map printks to ARM.   Andreas Fenkart
• [PATCH 1/5] Add "virtual kernel memory..." printout.   Andreas Fenkart
• [PATCH 2/5] Make delimiters of DMA area globally visibly.   Andreas Fenkart
• [PATCH 3/5] Change type of VMALLOC_END to unsigned long.   Andreas Fenkart
• [PATCH 4/5] Add checks to detect overlap of memory regions.   Andreas Fenkart
• [PATCH 5/5] Add PKMAP area description to memory.txt.   Andreas Fenkart
• pxa320: change uart configuration   Judith Baumgarten
• pxa320: change uart configuration   Russell King - ARM Linux
• [PATCH v3] Add Samsung S5PC110 SoC support   Marek Szyprowski
• [PATCH 01/21] drivers: serial: S5PC100 serial driver cleanup   Marek Szyprowski
• [PATCH 02/21] ARM: S5PC100: use 0x30008000 as memory base   Marek Szyprowski
• [PATCH 03/21] ARM: S5PC1XX: create sub-platform for S5PC100 SoCs   Marek Szyprowski
• [PATCH 04/21] ARM: S5PC1XX: prepare common cpu&clocks code for S5PC110 sub-platform   Marek Szyprowski
• [PATCH 05/21] ARM: S5PC1XX: prepare common gpiolib code for S5PC110 sub-platform   Marek Szyprowski
• [PATCH 06/21] ARM: S5PC1XX: move common s5pc1xx mach/* includes to plat-s5pc1xx/include/mach   Marek Szyprowski
• [PATCH 07/21] ARM: S5PC1XX: cleanup of s5pc1xx common code   Marek Szyprowski
• [PATCH 08/21] ARM: S5PC1XX: move s5pc100 specific device helpers to mach-s5pc100 dir   Marek Szyprowski
• [PATCH 09/21] ARM: S5PC1XX: move common s5pc1xx s3c-fb regs to platform directory   Marek Szyprowski
• [PATCH 10/21] drivers: serial: add support for Samsung S5PC110 SoC uart   Marek Szyprowski
• [PATCH 11/21] ARM: S5PC1XX: add S5PC110 memory map   Marek Szyprowski
• [PATCH 12/21] ARM: S5PC1XX: add S5PC110 cpu initialization code   Marek Szyprowski
• [PATCH 13/21] ARM: S5PC1XX: add support for s5pc110 plls and clocks   Marek Szyprowski
• [PATCH 14/21] ARM: S5PC1XX: add support for s5pc110 irqs   Marek Szyprowski
• [PATCH 15/21] ARM: S5PC1XX: add support for s5pc110 gpio   Marek Szyprowski
• [PATCH 16/21] ARM: S5PC1XX: add i2c platform helpers on s5pc110 sub-platform   Marek Szyprowski
• [PATCH 17/21] ARM: S5PC1XX: enable S5PC110 sub-platform   Marek Szyprowski
• [PATCH 18/21] ARM: S5PC1XX: add sdhci platform helpers for s5pc110 sub-platform   Marek Szyprowski
• [PATCH 19/21] ARM: S5PC1XX: add framebuffer platform helpers for s5pc110 sub-platform   Marek Szyprowski
• [PATCH 20/21] ARM: S5PC1XX: add support for SMDKC110 board   Marek Szyprowski
• [PATCH 21/21] MAINTAINERS: add ARM/S5PC100 and ARM/S5PC110 architectures   Marek Szyprowski
• ARM perf events support v5   Jamie Iles
• [PATCH 1/5] arm: provide a mechanism to reserve performance counters   Jamie Iles
• [PATCH 2/5] arm/oprofile: reserve the PMU when starting   Jamie Iles
• [PATCH 3/5] arm: use the spinlocked, generic atomic64 support   Jamie Iles
• [PATCH 4/5] arm: enable support for software perf events   Jamie Iles
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jamie Iles
• [PATCH] RFC: mx27: Add soc_camera support   Alan Carvalho de Assis
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v4)   Leif Lindholm
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v3)   Leif Lindholm
• [PATCH] armv6: invalidate cache onDMA_FROM_DEVICE/DMA_BIDIRECTIONAL   Catalin Marinas
• [PATCH 20/40] arm,kgdb: Add hook to catch an oops with debugger   Russell King - ARM Linux
• [PATCH] armv6: invalidate cache onDMA_FROM_DEVICE/DMA_BIDIRECTIONAL   Russell King - ARM Linux
• [PATCH] Offer 'uncacheable memory' as DMA coherent memory for ARMv6   Catalin Marinas
• [PATCH 20/40] arm, kgdb: Add hook to catch an oops with debugger   Jason Wessel
• [PATCH] Fix soft lockup in at91 udc driver   Remy Bohmer
• [PATCH] ARM: Fix uncompress code compile for different definesof static(void)   Tony Lindgren
• [PATCH] Updated: Fix soft lockup in at91 udc driver   Ryan Mallon
• [PATCH 20/40] arm, kgdb: Add hook to catch an oops with debugger   Jason Wessel
• [PATCH 20/40] arm,kgdb: Add hook to catch an oops with debugger   Russell King - ARM Linux
• [PATCH] ep93xx: include correct irq.h in core.c   H Hartley Sweeten
• [PATCH] Gemini: wrong registers used to set reg_level in gpio_set_irq_type()?   Roel Kluin
• Problem with CPU Data cache   Ni at m
• Problem with CPU Data cache   Russell King - ARM Linux
• [PATCH] staging/dream: add missing include files/fix compilation   Greg KH
• [PATCH] ARM: MINI2440: Fix mini2440 crash on boot due to improper __initdata qualifier   Ben Dooks
• [PATCH v5 1/8 RE-SEND-3] ARM: S5P6440: Add new CPU initialization support   Kukjin Kim
• [PATCH v5 2/8 RE-SEND] ARM: S5P6440: Add Clock and PLL support   Kukjin Kim
• [PATCH] ARM: MINI2440: Fix mini2440 crash on boot due to improper __initdata qualifier   Uri Yosef
• [PATCH] ARM: MINI2440: Fix mini2440 crash on boot due to improper __initdata qualifier   Uri Yosef
• [PULL] Please pull bjdooks' for-linus/samsung branch   Ben Dooks
• Pull request for bjdooks' next-samsung tree   Ben Dooks
• [PATCH] ARM: MINI2440: Fix mini2440 crash on boot due to improper __initdata qualifier   Ben Dooks
• Pull request for bjdooks' next-samsung tree   Ben Dooks
• [PATCH 00/18] OMAP2/3/4 clock: split out code for clock types and clean up   Paul Walmsley
• [PATCH 01/18] OMAP3 clock: move OMAP3-specific DPLL functions to dpll3xxx.c   Paul Walmsley
• [PATCH 02/18] OMAP2/3/4 clock: move DPLL clock functions into clkt_dpll.c   Paul Walmsley
• [PATCH 03/18] OMAP2/3/4 clock: move clksel clock functions into clkt_clksel.c   Paul Walmsley
• [PATCH 04/18] OMAP2 clock: move all static functions to the top of the file   Paul Walmsley
• [PATCH 05/18] OMAP2/3/4 clock: combine all omap2_clk_functions   Paul Walmsley
• [PATCH 06/18] OMAP2xxx clock: move the DPLL+CORE composite clock code into clkt2xxx_dpllcore.c   Paul Walmsley
• [PATCH 07/18] OMAP2xxx clock: move the DVFS virtual clock code into clkt2xxx_virt_prcm_set.c   Paul Walmsley
• [PATCH 08/18] OMAP2xxx clock: move the APLL clock code into clkt2xxx_apll.c   Paul Walmsley
• [PATCH 09/18] OMAP2xxx clock: move osc_clk code into clkt2xxx_osc.c   Paul Walmsley
• [PATCH 10/18] OMAP2xxx clock: move sys_clk code into clkt2xxx_sys.c   Paul Walmsley
• [PATCH 11/18] OMAP2 clock: don't compile OMAP2430-only functions on non-2430 builds   Paul Walmsley
• [PATCH 12/18] OMAP3 clock: split out DPLL3 M2 divider functions into clkt3xxx_dpll3m2.c   Paul Walmsley
• [PATCH 13/18] OMAP2/3 clock: clean up omap*_clk_arch_init()   Paul Walmsley
• [PATCH 14/18] OMAP2/3 clock: remove unnecessary includes and clean up header   Paul Walmsley
• [PATCH 15/18] OMAP2/3/4 clock: omap2_clk_prepare_for_reboot() is OMAP2xxx-only   Paul Walmsley
• [PATCH 16/18] OMAP3 DPLL: reorganize static functions   Paul Walmsley
• [PATCH 17/18] OMAP clock: resolve all remaining sparse warnings   Paul Walmsley
• [PATCH 18/18] OMAP2/3/4 clock: rename and clean the omap2_clk_init() functions   Paul Walmsley
• [PATCH v5 1/8 RE-SEND-4] ARM: S5P6440: Add new CPU initialization support   Kukjin Kim
• Pull request for bjdooks' next-samsung tree   Ben Dooks
• Samsung SoC device updates round 1   Ben Dooks
• [PATCH] ARM: S3C: Rename s3c_device_usb to s3c_device_ohci   Ben Dooks
• [PATCH] ARM: S3C2412: Fixup commented out device in SMDK2413   Ben Dooks
• [PATCH] ARM: SAMSUNG: Add initial documentation directory and overview   Ben Dooks
• [PATCH] ARM: SAMSUNG: Make UART device code common   Ben Dooks
• [PATCH] ARM: SAMSUNG: Add platform data registration for OHCI   Ben Dooks
• [PATCH] ARM: MINI2440: Remove commented out devices from device array   Ben Dooks
• [PATCH] ARM: SAMSUNG: Add initial documentation directory and overview   Maurus Cuelenaere
• Perf Event support for ARMv7 (was: Re: [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6)   Jean Pihet
• Perf Event support for ARMv7 (was: Re: [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6)   Jean Pihet
• Perf Event support for ARMv7 (was: Re: [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6)   Jamie Iles
• Perf Event support for ARMv7 (was: Re: [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6)   Jean Pihet
• Perf Event support for ARMv7 (was: Re: [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6)   Jamie Iles
• [PATCH] OMAP: hwmod: add read/write API for SYSCONFIG - for 2.6.34   Paul Walmsley
• [PATCH] otg Kconfig: add missing select USB_OTG_UTILS to USB_ULPI option   Valentin Longchamp
• [suspend/resume] Re: userspace notification from module   Pavel Machek
• [RFC 03/18] arm: boot: remove old ARM ID for QSD   Russell King - ARM Linux
• [suspend/resume] Re: userspace notification from module   Rafael J. Wysocki
• [PATCH 0/5] Adding x86-like memory map printks to ARM.   Russell King - ARM Linux
• [PATCH 1/5] Add "virtual kernel memory..." printout.   Russell King - ARM Linux
• [PATCH 0/5] Adding x86-like memory map printks to ARM.   H Hartley Sweeten
• Kirkwood/OpenRD-Base System Crash from DMA   rektide
• Kirkwood/OpenRD-Base System Crash from DMA   Alexander Clouter
• [PATCH] OMAP1 clock: fix for "BUG: spinlock lockup on CPU#0"   Paul Walmsley
• [PATCH 0/4] omap multiboot improvments for merge window after 2.6.34   Tony Lindgren
• [PATCH 1/4] omap: Clean the serial port defines   Tony Lindgren
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic   Tony Lindgren
• [PATCH 3/4] omap: Remove old DEBUG_LL serial port options   Tony Lindgren
• [PATCH 4/4] omap: Make get_irqnr_and_base common for mach-omap2 multiboot   Tony Lindgren
• [PATCH] omap: Multiboot compile fixes to compile in 24xx and 34xx   Tony Lindgren
• [suspend/resume] Re: userspace notification from module   Eric Miao
• [PATCH 1/4] omap: Clean the serial port defines   Shilimkar, Santosh
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic   Russell King - ARM Linux
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic   Shilimkar, Santosh
• [PATCH 4/4] omap: Make get_irqnr_and_base common for mach-omap2 multiboot   Shilimkar, Santosh
• [PATCH 4/4] omap: Make get_irqnr_and_base common for mach-omap2 multiboot   Russell King - ARM Linux
• s3c-hsotg driver problem   Maurus Cuelenaere
• [RFC] PCMCIA locking updates for 2.6.34   Dominik Brodowski
• [suspend/resume] Re: userspace notification from module   Stanislav Brabec
• [PATCH v2] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Alberto Panizzo
• [suspend/resume] Re: userspace notification from module   Pavel Machek
• [suspend/resume] Re: userspace notification from module   Pavel Machek
• [suspend/resume] Re: userspace notification from module   Pavel Machek
• [PATCH 4/4] omap: Make get_irqnr_and_base common for mach-omap2 multiboot   Tony Lindgren
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic   Tony Lindgren
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic   Tony Lindgren
• [PATCH 1/4] omap: Clean the serial port defines   Tony Lindgren
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic   Russell King - ARM Linux
• [PATCH 1/4] omap: Clean the serial port defines   Shilimkar, Santosh
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic   Shilimkar, Santosh
• [RFC] PCMCIA locking updates for 2.6.34   Wolfram Sang
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic   Tony Lindgren
• [PATCH 1/4] omap: Clean the serial port defines   Tony Lindgren
• [PATCH 0/4] omap multiboot improvments for merge window after 2.6.34   Tony Lindgren
• [PATCH] IMX serial: Check platform data pointer before use   Yauhen Kharuzhy
• Issue in oamp nand driver with 32-bit reads in prefetch mode   Artem Bityutskiy
• [PATCH] IMX serial: Check platform data pointer before use   Wolfram Sang
• [suspend/resume] Re: userspace notification from module   Rafael J. Wysocki
• [suspend/resume] Re: userspace notification from module   Rafael J. Wysocki
• [suspend/resume] Re: userspace notification from module   Pavel Machek
• [suspend/resume] Re: userspace notification from module   Pavel Machek
• [suspend/resume] Re: userspace notification from module   Rafael J. Wysocki
• [suspend/resume] Re: userspace notification from module   Pavel Machek
• [suspend/resume] Re: userspace notification from module   Rafael J. Wysocki
• [suspend/resume] Re: userspace notification from module   Rafael J. Wysocki
• [suspend/resume] Re: userspace notification from module   Russell King - ARM Linux
• s3c-hsotg driver problem   Barry Song
• [PATCH] IMX serial: Check platform data pointer before use   Baruch Siach
• [BUG] pxa27x_udc: possible recursive locking detected in pxa_ep_queue   Antonio Ospite
• s3c-hsotg driver problem   Maurus Cuelenaere
• Use of data types in new portings   Khushhua Mogambo
• [suspend/resume] Re: userspace notification from module   Pavel Machek
• s3c-hsotg driver problem   jassi brar
• [suspend/resume] Re: userspace notification from module   Russell King - ARM Linux
• [BUG] pxa27x_udc: possible recursive locking detected in pxa_ep_queue   Robert Jarzmik
• [PATCH] Gemini: wrong registers used to set reg_level in gpio_set_irq_type()?   Paulius Zaleckas
• [PATCH v2 0/2] I2C driver support for Nomadik/Ux500   srinidhi kasagar
• [PATCH] arch/arm: Fix build failure for msm_defconfig caused by wrong include path   Peter Huewe
• Samsung GPIO updates   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move GPIO common functions to plat-samsung   Ben Dooks
• [PATCH] ARM: S5P6440: Add S5P6440 GPIO support   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move pm-gpio into plat-samsung   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move gpiolib support in gpio.c to plat-samsung   Ben Dooks
• [PATCH] ARM: SAMSUNG: Add initial documentation directory and overview   Ben Dooks
• [PATCH] ARM: SAMSUNG: Add check to ensure that clksrc_clk does have multiple clock sources   Thomas Abraham
• [PATCH] ARM: SAMSUNG: Add check to ensure that clksrc_clk does have multiple clock sources   Ben Dooks
• Kernel Start-up Time   Caglar Akyuz
• Kernel Start-up Time   Tonyliu
• Samsung Clock updates #2   Ben Dooks
• [PATCH] ARM: S5PC1XX: Register pd0 and hd0 clocks, remove unecessary dummy_enable   Ben Dooks
• [PATCH] ARM: SAMSUNG: Add check to ensure that clksrc_clk does have multiple clock sources   Ben Dooks
• [PATCH] ARM: SAMSUNG: Fix clksrc-clk's checks for bad register settings   Ben Dooks
• [PATCH] ARM: SAMSUNG: Fix bug in clksrc-clk round_rate call.   Ben Dooks
• Samsung SoC device updates (rev2)   Ben Dooks
• [PATCH] ARM: S3C: Rename s3c_device_usb to s3c_device_ohci   Ben Dooks
• [PATCH] ARM: S3C2412: Fixup commented out device in SMDK2413   Ben Dooks
• [PATCH] ARM: SAMSUNG: Add initial documentation directory and overview   Ben Dooks
• [PATCH] ARM: SAMSUNG: Make UART device code common   Ben Dooks
• [PATCH] ARM: SAMSUNG: Add platform data registration for OHCI   Ben Dooks
• [PATCH] ARM: MINI2440: Remove commented out devices from device array   Ben Dooks
• [PATCH] ARM: S3C24XX: Add mci platform data set call s3c24xx_mci_set_platdata().   Ben Dooks
• [PATCH] otg Kconfig: add missing select USB_OTG_UTILS to USB_ULPI option   Uwe Kleine-König
• Kernel Start-up Time   Caglar Akyuz
• NetSilicon support   Uwe Kleine-König
• [PATCH] ARM: S5P6440: Add S5P6440 GPIO support   Ben Dooks
• S3C64XX SPI updates   Ben Dooks
• [PATCH] ARM: S3C64XX: SPI: Add SPI controller register base   Ben Dooks
• [PATCH] ARM: S3C64XX: SPI: Define SPI-48M clock sources   Ben Dooks
• [PATCH] ARM: S3C64XX: SPI: Header for passing platform data   Ben Dooks
• [PATCH] ARM: S3C64XX: SPI: Define SPI controller devices   Ben Dooks
• [PATCH] ARM: Fix uncompress code compile for different definesof static(void)   Uwe Kleine-König
• [PATCH] ARM: SAMSUNG: Add initial documentation directory and overview   Maurus Cuelenaere
• Use of data types   Khushhua Mogambo
• [PATCH 0/3] OMAP4: prcm/clock fixes   Nayak, Rajendra
• flush_dcache_page does too much?   anfei
• flush_dcache_page does too much?   Russell King - ARM Linux
• ioctl() returns EFAULT / MMU domain problem?   Koyo Takenoshita
• Use of data types   Uwe Kleine-König
• Use of data types   Matthias Kaehlcke
• ioctl() returns EFAULT / MMU domain problem?   Russell King - ARM Linux
• Use of data types   Russell King - ARM Linux
• Use of data types   Russell King - ARM Linux
• flush_dcache_page does too much?   anfei
• flush_dcache_page does too much?   Russell King - ARM Linux
• flush_dcache_page does too much?   anfei
• [PATCH 20/40] arm,kgdb: Add hook to catch an oops with debugger   Jason Wessel
• flush_dcache_page does too much?   Russell King - ARM Linux
• flush_dcache_page does too much?   anfei
• flush_dcache_page does too much?   anfei
• flush_dcache_page does too much?   Russell King - ARM Linux
• Kernel Start-up Time   Steve Chen
• [PATCH] regulator: mc13783: consider Power Gates as digital regulators.   Alberto Panizzo
• [PATCH] regulator: mc13783: consider Power Gates as digital regulators.   Mark Brown
• [PATCH 0/3] OMAP4: prcm/clock fixes   Paul Walmsley
• [PATCH] arch/arm: Fix build failure for ixp23xx-defconfig caused by typo   Peter Hüwe
• [PATCH] regulator: mc13783: consider Power Gates as digital regulators.   Alberto Panizzo
• [PATCH] regulator: mc13783: consider Power Gates as digital regulators.   Mark Brown
• [PATCH] regulator: mc13783: consider Power Gates as digital regulators.   Alberto Panizzo
• [PATCH] regulator: mc13783: consider Power Gates as digital regulators.   Mark Brown
• Elusive crash in SMC91X/PXA network code?   Michael Abbott
• [RFC 07/18] arm: mm: retry on QSD icache parity errors   Ashwin Chaugule
• Elusive crash in SMC91X/PXA network code?   Daniel Mack
• [PATCH] regulator: mc13783: consider Power Gates as digital regulators.   Uwe Kleine-König
• [v2 PATCH 2/5] ARM: OMAP4: PM: OMAP4 Power Domain Porting Related Clean-up.   Kevin Hilman
• [PATCH - 3rd attempt] ARM: Support for Embedian MXM-8x10 eval kit   Edwin Peer
• Kernel Start-up Time   Dirk Behme
• [v2 PATCH 2/5] ARM: OMAP4: PM: OMAP4 Power Domain Porting Related Clean-up.   Paul Walmsley
• [PATCH] Updated: Fix soft lockup in at91 udc driver   Ryan Mallon
• [PATCH] regulator: mc13783: consider Power Gates as digital regulators.   Alberto Panizzo
• Elusive crash in SMC91X/PXA network code?   Robin Randhawa
• [PATCH - 3rd attempt] ARM: Support for Embedian MXM-8x10 eval kit   Daniel Mack
• [PATCHv4] [ARM] kirkwood: combine support for openrd base/client support   Alexander Clouter
• flush_dcache_page does too much?   anfei
• [PATCH] ARM: SAMSUNG: Add initial documentation directory and overview   Ben Dooks
• [PATCH 1/4] omap: Clean the serial port defines   Pandita, Vikram
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic   Pandita, Vikram
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic   Pandita, Vikram
• [PATCH] ARM: S5P6440: Add IO descriptor for ChipID block.   Kukjin Kim
• [suspend/resume] Re: userspace notification from module   Pavel Machek
• [PATCH - 3rd attempt] ARM: Support for Embedian MXM-8x10 eval kit   Hennie van der Merwe
• [PATCH - 3rd attempt] ARM: Support for Embedian MXM-8x10 eval kit   Eric Miao
• [PATCH - 3rd attempt] ARM: Support for Embedian MXM-8x10 eval kit   Edwin Peer
• [PATCH - 3rd attempt] ARM: Support for Embedian MXM-8x10 eval kit   Hennie van der Merwe
• [PATCH] staging/dream: add missing include files/fix compilation   Pavel Machek
• [PATCH - 3rd attempt] ARM: Support for Embedian MXM-8x10 eval kit   Hennie van der Merwe
• [PATCH - v4] ARM: Support for Embedian MXM-8x10 eval kit   Edwin Peer
• [PATCHv4] [ARM] kirkwood: combine support for openrd base/client support   Simon Kagstrom
• ioctl() returns EFAULT / MMU domain problem?   Koyo Takenoshita
• ioctl() returns EFAULT / MMU domain problem?   Koyo Takenoshita
• [PATCH] ARM: S5P6440: Add IO descriptor for ChipID block.   Ben Dooks
• Query about loops_per_jiffy   胡杨树
• Query about loops_per_jiffy   Alessandro Rubini
• Query about loops_per_jiffy   Russell King - ARM Linux
• ioctl() returns EFAULT / MMU domain problem?   Russell King - ARM Linux
• Kernel Start-up Time   Caglar Akyuz
• make PHYS_OFFSET determined at run time (unfinished)   Uwe Kleine-König
• Kernel Start-up Time   Caglar Akyuz
• [PATCH] arm: don't define unused symbol initrd_phys for zImage   Uwe Kleine-König
• [PATCH] arm: add a comment to __atags_pointer describing where it's set   Uwe Kleine-König
• [PATCH] arm: remove support for old way to pass kernel parameters   Uwe Kleine-König
• [PATCH] arm: add a comment to __atags_pointer describing where it's set   Russell King - ARM Linux
• [PATCH] Updated: Fix soft lockup in at91 udc driver   Uwe Kleine-König
• [PATCH] arm: remove support for old way to pass kernel parameters   Russell King - ARM Linux
• Kernel Start-up Time   Russell King - ARM Linux
• [PATCH] arm: deprecate support for old way to pass kernel parameters   Uwe Kleine-König
• [PATCH 0/3] OMAP4: prcm/clock fixes   Nayak, Rajendra
• [PULL] Please pull bjdooks' for-rmk/samsung2   Ben Dooks
• [PATCH] regulator: mc13783: consider Power Gates as digital regulators.   Liam Girdwood
• [PATCH] Updated: Fix soft lockup in at91 udc driver   Remy Bohmer
• Kernel Start-up Time   Bahadir Balban
• Kernel Start-up Time   Johannes Stezenbach
• [PATCH] regulator: mc13783: consider Power Gates as digital regulators.   Alberto Panizzo
• Use of data types   Khushhua Mogambo
• flush_dcache_page does too much?   anfei
• Query about loops_per_jiffy   胡杨树
• Kernel Start-up Time   Caglar Akyuz
• Kernel Start-up Time   Caglar Akyuz
• Kernel Start-up Time   Caglar Akyuz
• [PATCH] staging/dream: add missing include files/fix compilation   Daniel Walker
• [PATCH] SMDK6410: Set up interrupt range for WM835x on 1190-EV1 PMIC board   Mark Brown
• [PATCH] staging/dream: add missing include files/fix compilation   Greg KH
• [PATCH 0/3] OMAP4: prcm/clock fixes   Paul Walmsley
• [RFC 07/18] arm: mm: retry on QSD icache parity errors   Ashwin Chaugule
• [PATCH 0/3] OMAP4: prcm/clock fixes   Paul Walmsley
• [RFC 18/18] arm: mm: qsd8x50: Fix incorrect permission faults   Jamie Lokier
• [RFC 06/18] arm: msm: implement proper dmb() for 7x27   Jamie Lokier
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic   Kevin Hilman
• [RFC 06/18] arm: msm: implement proper dmb() for 7x27   Jamie Lokier
• [RFC 18/18] arm: mm: qsd8x50: Fix incorrect permission faults   Daniel Walker
• [RFC 08/18] arm: msm: set L2CR1 to enable prefetch andburstonScorpion.   Jamie Lokier
• Use of data types   Russell King - ARM Linux
• [RFC 18/18] arm: mm: qsd8x50: Fix incorrect permission faults   Jamie Lokier
• flush_dcache_page does too much?   Russell King - ARM Linux
• [RFC 18/18] arm: mm: qsd8x50: Fix incorrect permission faults   Daniel Walker
• [RFC 06/18] arm: msm: implement proper dmb() for 7x27   Russell King - ARM Linux
• [RFC 18/18] arm: mm: qsd8x50: Fix incorrect permission faults   Russell King - ARM Linux
• flush_dcache_page does too much?   Jamie Lokier
• [PATCH 12/18] OMAP3 clock: split out DPLL3 M2 divider functions into clkt3xxx_dpll3m2.c   Paul Walmsley
• make PHYS_OFFSET determined at run time (unfinished)   Ryan Mallon
• [RFC 06/18] arm: msm: implement proper dmb() for 7x27   Jamie Lokier
• [PATCH] OMAP CPU ID: fix OMAP4 build failure   Paul Walmsley
• [PATCH] OMAP CPU ID: fix OMAP4 build failure (fwd)   Paul Walmsley
• [RFC 06/18] arm: msm: implement proper dmb() for 7x27   Russell King - ARM Linux
• [PATCH v2 00/18] OMAP2/3/4 clock: split out code for clock types and clean up   Paul Walmsley
• [PATCH v2 01/18] OMAP3 clock: move OMAP3-specific DPLL functions to dpll3xxx.c   Paul Walmsley
• [PATCH v2 02/18] OMAP2/3/4 clock: move DPLL clock functions into mach-omap2/clkt_dpll.c   Paul Walmsley
• [PATCH v2 03/18] OMAP2/3/4 clock: move clksel clock functions into mach-omap2/clkt_clksel.c   Paul Walmsley
• [PATCH v2 04/18] OMAP2 clock: move all static functions to the top of the file   Paul Walmsley
• [PATCH v2 05/18] OMAP2/3/4 clock: combine all omap2_clk_functions   Paul Walmsley
• [PATCH v2 06/18] OMAP2xxx clock: move the DPLL+CORE composite clock code into mach-omap2/clkt2xxx_dpllcore.c   Paul Walmsley
• [PATCH v2 07/18] OMAP2xxx clock: move the DVFS virtual clock code into mach-omap2/clkt2xxx_virt_prcm_set.c   Paul Walmsley
• [PATCH v2 08/18] OMAP2xxx clock: move the APLL clock code into mach-omap2/clkt2xxx_apll.c   Paul Walmsley
• [PATCH v2 09/18] OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.c   Paul Walmsley
• [PATCH v2 10/18] OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.c   Paul Walmsley
• [PATCH v2 11/18] OMAP2 clock: don't compile OMAP2430-only functions on non-2430 builds   Paul Walmsley
• [PATCH v2 12/18] OMAP3 clock: split out DPLL3 M2 divider functions into mach-omap2/clkt3xxx_dpll3m2.c   Paul Walmsley
• [PATCH v2 13/18] OMAP2/3 clock: clean up omap*_clk_arch_init()   Paul Walmsley
• [PATCH v2 14/18] OMAP2/3 clock: remove unnecessary includes and clean up header   Paul Walmsley
• [PATCH v2 15/18] OMAP2/3/4 clock: omap2_clk_prepare_for_reboot() is OMAP2xxx-only   Paul Walmsley
• [PATCH v2 16/18] OMAP3 DPLL: reorganize static functions   Paul Walmsley
• [PATCH v2 17/18] OMAP clock: resolve all remaining sparse warnings   Paul Walmsley
• [PATCH v2 18/18] OMAP2/3/4 clock: rename and clean the omap2_clk_init() functions   Paul Walmsley
• [PATCH 04/10] OMAP clockdomain/powerdomain: remove runtime register/unregister   Kevin Hilman
• [PATCH 04/10] OMAP clockdomain/powerdomain: remove runtime register/unregister   Paul Walmsley
• [GIT PULL] More OMAP clock/hwmod fixes for 2.6.33-rc   Paul Walmsley
• make PHYS_OFFSET determined at run time (unfinished)   Ben Dooks
• git pre-commit hook running checkpatch.pl   Ben Dooks
• make PHYS_OFFSET determined at run time (unfinished)   Steve Chen
• make PHYS_OFFSET determined at run time (unfinished)   Ben Dooks
• Samsung plat-samsung moves round 2   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move more support into plat-samsung   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move pmw.c to plat-samsung   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move pm-check.c to plat-samsung   Ben Dooks
• Use of data types   Ben Dooks
• [PATCH] OMAP CPU ID: fix OMAP4 build failure   Pagare, Abhijit
• 2.6.23 irda   Pavel Machek
• [PATCH] OMAP CPU ID: fix OMAP4 build failure   Shilimkar, Santosh
• s3c-hsotg driver problem   Barry Song
• [PATCH 1/2] s3cmci: Initialize default platform data no_wprotect and no_detect with 1   Lars-Peter Clausen
• [PATCH 2/2] s3cmci: s3cmci_card_present: Use no_detect to decide whether there is a card detect pin   Lars-Peter Clausen
• make PHYS_OFFSET determined at run time (unfinished)   Uwe Kleine-König
• [PATCH] OMAP CPU ID: fix OMAP4 build failure   Pagare, Abhijit
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Tomasz Fujak
• [PATCH v1 1/2] perfevent: Add performance event structure definition and 'extevents' sysfs entry   Tomasz Fujak
• [PATCH v1 2/2] [ARM] perfevent: Event description list for ARMv6, Cortex-A8 and Cortex-A9 exported   Tomasz Fujak
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Peter Zijlstra
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Tomasz Fujak
• make PHYS_OFFSET determined at run time (unfinished)   Russell King - ARM Linux
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Michał Nazarewicz
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Russell King - ARM Linux
• git pre-commit hook running checkpatch.pl   Russell King - ARM Linux
• git pre-commit hook running checkpatch.pl   Mark Brown
• [PATCH] OMAP CPU ID: fix OMAP4 build failure   Shilimkar, Santosh
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Tomasz Fujak
• [PATCH 1/2] s3cmci: Initialize default platform data no_wprotect and no_detect with 1   Lars-Peter Clausen
• [PATCH] mx3fb: some debug and initialisation fixes.   Alberto Panizzo
• [PATCH] mx3fb: some debug and initialisation fixes.   Mark Brown
• [PATCH] S3C64XX: Fix dev-audio build   Mark Brown
• Use of data types   Khushhua Mogambo
• [PATCH 1/2] S3C64XX: Staticise audio platform data   Mark Brown
• [PATCH 2/2] SAMSUNG: Staticise gpiolib implementation functions   Mark Brown
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Jamie Iles
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Peter Zijlstra
• Perf Event support for ARMv7 (was: Re: [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6)   Will Deacon
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Russell King - ARM Linux
• [PATCH 12/18] OMAP3 clock: split out DPLL3 M2 divider functions into clkt3xxx_dpll3m2.c   Ranjith Lohithakshan
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Peter Zijlstra
• [PATCH] ARM: L2 : Add maintainace by line helper functions   Santosh Shilimkar
• [PATCH] ARM: L2 : Errata 588369: Clean & Invalidate do not invalidate clean lines   Santosh Shilimkar
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Michał Nazarewicz
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Peter Zijlstra
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Peter Zijlstra
• make PHYS_OFFSET determined at run time (unfinished)   Steve Chen
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Russell King - ARM Linux
• [PATCH] mx3fb: some debug and initialisation fixes.   Alberto Panizzo
• make PHYS_OFFSET determined at run time (unfinished)   Uwe Kleine-König
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Russell King - ARM Linux
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Michał Nazarewicz
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Jamie Iles
• git pre-commit hook running checkpatch.pl   Uwe Kleine-König
• too much memory for node   Ben Dooks
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Russell King - ARM Linux
• too much memory for node   Russell King - ARM Linux
• [PATCH 20/40] arm,kgdb: Add hook to catch an oops with debugger   Russell King - ARM Linux
• too much memory for node   Ben Dooks
• too much memory for node   Russell King - ARM Linux
• decompression stopped printing dots (Uncompressing Linux...)   Uwe Kleine-König
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Jamie Iles
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Jamie Lokier
• [PATCH/RFC v1 0/2] Human readable performance event description in sysfs   Russell King - ARM Linux
• [PATCH 20/40] arm,kgdb: Add hook to catch an oops with debugger   Jason Wessel
• Realview IRQs and atomic64 code patches   Will Deacon
• Realview IRQs and atomic64 code patches   Russell King - ARM Linux
• [PATCH] locomo.c: make irq register access typesafe   H Hartley Sweeten
• [PATCH] otg Kconfig: add missing select USB_OTG_UTILS to USB_ULPI option   Valentin Longchamp
• [PATCH] otg Kconfig: select USB_OTG_UTILS wtih USB_ULPI option   Valentin Longchamp
• [PATCH] otg Kconfig: select USB_OTG_UTILS wtih USB_ULPI option   Uwe Kleine-König
• [PATCH] otg Kconfig: let USB_OTG_UTILS select USB_ULPI option   Valentin Longchamp
• [PATCH] otg Kconfig: let USB_OTG_UTILS select USB_ULPI option   Uwe Kleine-König
• [PATCH] otg Kconfig: let USB_OTG_UTILS select USB_ULPI option   Valentin Longchamp
• [PATCH] ep93xx: Add support for Simplemachines Sim.One board   Ryan Mallon
• Linux kernel crash dumps for ARM   Ofer Heifetz
• [PATCH 0/3] OMAP4: prcm/clock fixes   Paul Walmsley
• [GIT PULL v2] More OMAP clock/hwmod fixes for 2.6.33-rc   Paul Walmsley
• [PATCH] ep93xx: Add support for Simplemachines Sim.One board   Ryan Mallon
• [PATCH 0/4] omap fixes for 2.6.33-rc4   Tony Lindgren
• [PATCH 1/4] omap: Fix cmdline muxing   Tony Lindgren
• [PATCH 2/4] omap: Fix functions for dynamic remuxing of pins   Tony Lindgren
• [PATCH 3/4] omap3: Fix cpu detection   Tony Lindgren
• [PATCH 4/4] OMAP: dma_chan[lch_head].flag & OMAP_DMA_ACTIVE tested twice in omap_dma_unlink_lch()   Tony Lindgren
• Question: locomo_{read/write}l macros   H Hartley Sweeten
• [PATCH] ep93xx: Add support for Simplemachines Sim.One board   Ryan Mallon
• [PATCH] omap: Clean the serial port defines   Tony Lindgren
• [PATCH] omap: Enable GPMC clock in gpmc_init   Olof Johansson
• [PATCH 1/4] omap: Clean the serial port defines   Tony Lindgren
• [PATCH] ARM: S3C64XX: Fix typo in s3c-hsotg platform data   Maurus Cuelenaere
• make PHYS_OFFSET determined at run time (unfinished)   jassi brar
• [PATCH] ARM: S3C64XX: Fix typo in s3c-hsotg platform data   Ben Dooks
• [PATCH 1/2] S3C64XX: Staticise audio platform data   Ben Dooks
• [PATCH] S3C64XX: Fix dev-audio build   Ben Dooks
• Question: locomo_{read/write}l macros   Eric Miao
• [PATCH 5/4] omap: Enable GPMC clock in gpmc_init   Tony Lindgren
• [PATCH] locomo.c: make irq register access typesafe   Eric Miao
• make PHYS_OFFSET determined at run time (unfinished)   Ryan Mallon
• [PATCH] arm: Add \tmp register for addruart and loadsp   Tony Lindgren
• [PATCH] locomo.c: make irq register access typesafe   H Hartley Sweeten
• [PATCH] locomo.c: make irq register access typesafe   Eric Miao
• [PATCH] locomo.c: make irq register access typesafe   H Hartley Sweeten
• [PATCH] OMAP CPU ID: fix OMAP4 build failure   Paul Walmsley
• [PATCH] OMAP CPU ID: fix OMAP4 build failure   Paul Walmsley
• [PATCH 05/10] OMAP clockdomains: add usecounting for wakeup and sleep dependencies   Paul Walmsley
• [PATCH] OMAP CPU ID: fix OMAP4 build failure   Shilimkar, Santosh
• [PATCH] OMAP CPU ID: fix OMAP4 build failure   Paul Walmsley
• Tidy for S3C64XX SPI device code   Ben Dooks
• [PATCH] ARM: S3C64XX: Tidy up common code in s3c64xx_spi_set_info()   Ben Dooks
• [PATCH 0/3] OMAP4: prcm/clock fixes   Nayak, Rajendra
• [PATCH] ARM: S3C64XX: Tidy up common code in s3c64xx_spi_set_info()   jassi brar
• [PATCH] gpiolib: add gpio_lookup_chip() to get chip information for gpio   Andrew Morton
• [PATCH] OMAP CPU ID: fix OMAP4 build failure   Pagare, Abhijit
• [PATCH] ARM: MX3: Fixed typo in declared enum type name.   Vladimir Zapolskiy
• [PATCH/RFC] arm: Enable backtrace printing on oops when PC is corrupted   Laurent Pinchart
• [PATCH] ARM: MX3: Fixed typo in declared enum type name.   Daniel Mack
• [PATCH 1/5] arm: provide a mechanism to reserve performance counters   Jamie Iles
• [PATCH] ARM: MX3: Fixed typo in declared enum type name.   Vladimir Zapolskiy
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jamie Iles
• [PATCH] ARM: MX3: Fixed typo in declared enum type name.   Daniel Mack
• [PATCH 1/2] S3C64XX: Staticise audio platform data   Mark Brown
• [PATCH] ARM: Fix the reset logic for ARM RealView boards   Philby John
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Will Deacon
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jamie Iles
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Russell King - ARM Linux
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Will Deacon
• make PHYS_OFFSET determined at run time (unfinished)   Steve Chen
• make PHYS_OFFSET determined at run time (unfinished)   Steve Chen
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jean Pihet
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jamie Iles
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jean Pihet
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Will Deacon
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jean Pihet
• make PHYS_OFFSET determined at run time (unfinished)   Uwe Kleine-König
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Russell King - ARM Linux
• make PHYS_OFFSET determined at run time (unfinished)   Steve Chen
• [PATCH] ARM: MX3: Fixed typo in declared enum type name.   Sascha Hauer
• [PATCH 0/3] mx25: NAND support   Baruch Siach
• [PATCH 0/3] mx25: NAND support   Sascha Hauer
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jamie Iles
• [PATCH 0/2] mx25: clock related fixes   Baruch Siach
• [PATCH 1/2] mx25: remove unused mx25_clocks_init() argument   Baruch Siach
• [PATCH 2/2] mx25: properly initialize clocks, fix time accounting   Baruch Siach
• make PHYS_OFFSET determined at run time (unfinished)   Steve Chen
• [PATCH v2] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Alberto Panizzo
• Question: locomo_{read/write}l macros   H Hartley Sweeten
• [PATCH 1/7] [ARM] sa1100: remove unreferenced IRQ definitions   Thomas Kunze
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic   Tony Lindgren
• [PATCH updated] ep93xx: Add support for Simplemachines Sim.One board   Ryan Mallon
• Use of data types in new portings   David Woodhouse
• [PATCH] serial imx.c: fix CTS trigger level lower to avoid lost chars   Valentin Longchamp
• [PATCH] hmt: adjust for new pwm_backlight->notify prototype   Peter Korsgaard
• [PATCH] serial imx.c: fix CTS trigger level lower to avoid lost chars   Wolfram Sang
• [PATCH] serial imx.c: fix CTS trigger level lower to avoid lost chars   Russell King - ARM Linux
• [PATCH v3 1/9] ARM: S5PV210: Add Samsung S5PV210 CPU support   Kukjin Kim
• [PATCH v3 2/9] ARM: S5PV210: Add clock support for S5PV210   Kukjin Kim
• [PATCH v3 3/9] ARM: S5PV210: Add IRQ support   Kukjin Kim
• [PATCH v3 4/9] ARM: S5PV210: Update Kconfig and Makefiles   Kukjin Kim
• [PATCH v3 5/9] ARM: S5PV210: Add SMDKV210 board support file   Kukjin Kim
• [PATCH v3 6/9] ARM: S5PV210: Add SMDKC110 board support file   Kukjin Kim
• [PATCH v3 7/9] ARM: S5PV210: Add S5PV210 configuration file   Kukjin Kim
• [PATCH 8/8] ARM: S5P6442: Add serial port support   Kukjin Kim
• [PATCH v3 0/9] ARM: S5PV210: Add support for Samsung's S5PV210 CPU   Kukjin Kim
• [PATCH v3 8/9] ARM: S5PV210: Add S5PC110 configuration file   Kukjin Kim
• [PATCH v3 9/9] ARM: S5PV210: Add serial port support   Kukjin Kim
• [PATCH updated] ep93xx: Add support for Simplemachines Sim.One board   H Hartley Sweeten
• [PATCH v3 1/9] ARM: S5PV210: Add Samsung S5PV210 CPU support   Ben Dooks
• [PATCH v3 9/9 RE-SEND] ARM: S5PV210: Add serial port support   Thomas Abraham
• Ignore [PATCH 8/8] ARM: S5P6442: Add serial port support   Kukjin Kim
• 答复: Query about loops_per_jiffy   rocky
• [PULL] Please pull bjdooks' for-linus/samsung   Ben Dooks
• [PATCH v3 9/9 RE-SEND] ARM: S5PV210: Add serial port support   Ben Dooks
• [PATCH v3 9/9 RE-SEND-2] ARM: S5PV210: Add serial port support   Kukjin Kim
• [PATCH] omap: Make uncompress code and DEBUG_LL code generic   Tony Lindgren
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic, v2   Tony Lindgren
• [PATCH] hmt: adjust for new pwm_backlight->notify prototype   Ben Dooks
• [PATCH 2/2] mx25: properly initialize clocks, fix time accounting   Baruch Siach
• [PATCH v3 0/9] ARM: S5PV210: Add support for Samsung's S5PV210 CPU   Marek Szyprowski
• [PATCH 1/2] i.MX25: Allow secondary clocks in DEFINE_CLOCK   Sascha Hauer
• [PATCH 2/2] i.MX25: implement secondary clocks for uarts and fec   Sascha Hauer
• [PATCH 2/2] mx25: properly initialize clocks, fix time accounting   Sascha Hauer
• [PATCH 2/2] mx25: properly initialize clocks, fix time accounting   Sascha Hauer
• [PATCH 2/2] mx25: properly initialize clocks, fix time accounting   Sascha Hauer
• [PATCH - v5] support for Embedian MXM-8x10   Edwin Peer
• [Linux-arm-nuc900] [PATCH] NUC900: add timer 0-4 clk enabling definition   Qiang Wang
• [Linux-arm-nuc900] [PATCH] NUC900: add timer 0-4 clk enabling definition   Wan ZongShun
• [PATCH] ARM: Fix the reset on the RealView PBX Development board   Colin Tuckley
• [PATCH] serial imx.c: fix CTS trigger level lower to avoid lost chars   Valentin Longchamp
• [PATCH] serial imx.c: fix CTS trigger level lower to avoid lost chars   Jamie Lokier
• [PATCH] serial imx.c: fix CTS trigger level lower to avoid lost chars   Russell King - ARM Linux
• [PATCH] serial imx.c: fix CTS trigger level lower to avoid lost chars   Wolfram Sang
• make PHYS_OFFSET determined at run time (unfinished)   Uwe Kleine-König
• [PATCH] serial imx.c: fix CTS trigger level lower to avoid lost chars   Wolfram Sang
• [PATCH]NUC900 clk enable problem fix   Qiang Wang
• [PATCH/RFC v1 0/1] Platform-specific event support in the perf   Tomasz Fujak
• [PATCH v1 1/1] Extended events (platform-specific) support in perf   Tomasz Fujak
• [PATCH v1 1/1] Extended events (platform-specific) support in perf   Arnaldo Carvalho de Melo
• make PHYS_OFFSET determined at run time (unfinished)   jassi brar
• [spi-devel-general] PATCH [1/1] SPI: AMBA_PL022: Limit TX FIFO fills based on current RX FIFO used   Linus Walleij
• [PATCH v1 1/1] Extended events (platform-specific) support in perf   Tomasz Fujak
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic, v2   Pandita, Vikram
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Will Deacon
• [PATCH 1/2] arm/at91: Don't disable irqs in set_next_event and set_mode callbacks   Uwe Kleine-König
• [PATCH 1/2] arm/at91: Don't disable irqs in set_next_event and set_mode callbacks   Russell King - ARM Linux
• [PATCH] serial imx.c: fix CTS trigger level lower to avoid lost chars   Jamie Lokier
• [PATCH] serial imx.c: fix CTS trigger level lower to avoid lost chars   Jamie Lokier
• [PATCH 1/2] arm/at91: Don't disable irqs in set_next_event and set_mode callbacks   Uwe Kleine-König
• [PATCH] pcmcia/at91_cf: don't redefine SZ_2K   Uwe Kleine-König
• [PATCH] serial imx.c: fix CTS trigger level lower to avoid lost chars   Russell King - ARM Linux
• [PATCH] make struct platform_driver.id_table const   Uwe Kleine-König
• [PATCH] RFC: make struct platform_driver.id_table const   Uwe Kleine-König
• [PATCH] pcmcia/at91_cf: don't redefine SZ_2K   Andrew Victor
• [PATCH] mach-pnx4008/dma.c: clean up duplication in pnx4008_dma_split_{head, ll}_entry()   Roel Kluin
• [PATCH] pcmcia/at91_cf: don't redefine SZ_2K   Uwe Kleine-König
• [PATCH] omap2/3: Make get_irqnr_and_base common for mach-omap2 multiboot   Tony Lindgren
• [PATCH 4/4] omap: Make get_irqnr_and_base common for mach-omap2 multiboot, v2   Tony Lindgren
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic, v2   Tony Lindgren
• [PATCH 4/4] omap: Make get_irqnr_and_base common for mach-omap2 multiboot, v2   Russell King - ARM Linux
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic, v2   Pandita, Vikram
• [PATCH 4/4] omap: Make get_irqnr_and_base common for mach-omap2 multiboot, v2   Tony Lindgren
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic, v2   Tony Lindgren
• [PATCH 4/4] omap: Make get_irqnr_and_base common for mach-omap2 multiboot, v2   Tony Lindgren
• [PATCH] ARM: SAMSUNG: Fix null pointer dereference in ADC driver   Maurus Cuelenaere
• [PATCH 0/4] Add s3c64xx support to touchscreen driver   Maurus Cuelenaere
• [PATCH 1/4] ARM: SAMSUNG: Move mach/ts.h to plat/ts.h   Maurus Cuelenaere
• [PATCH 2/4] ARM: SAMSUNG: Rename s3c24xx touchscreen interface to s3c   Maurus Cuelenaere
• [PATCH 3/4] ARM: S3C64XX: Add touchscreen platform device definition   Maurus Cuelenaere
• [PATCH 4/4] ARM: S3C64XX: Add s3c64xx support to touchscreen driver   Maurus Cuelenaere
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic, v2   Pandita, Vikram
• measureing kernel & application boottime's   Shivdas Gujare
• [PATCH v2] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Alberto Panizzo
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic, v2   Tony Lindgren
• sharp c-3000 aka spitz: fix warn_on introduced in 2.6.32-rc1   Stanislav Brabec
• [PATCH 1/2] ARM: ixp2000: fix type of ixp2000_timer_interrupt   Uwe Kleine-König
• [PATCH 2/2] omap: define _toggle_gpio_edge_triggering only for OMAP1   Uwe Kleine-König
• [PATCH] Alter name of U300 watchdog resource   Linus Walleij
• [PATCH] MMCI: work around a hardware bug in U300   Linus Walleij
• gpio_keys and how PXA27x sets gpio_set_wake() (was Re: sharp c-3000 aka spitz: fix warn_on introduced in 2.6.32-rc1)   Stanislav Brabec
• [PATCH] serial imx.c: fix CTS trigger level lower to avoid lost chars   Valentin Longchamp
• [PATCH] Alter name of U300 watchdog resource   Uwe Kleine-König
• [PATCH] spinlock: don't use deprecated barriers on ARMv7   Russell King - ARM Linux
• [PATCH] mach-orion5x: D-link DNS-323 rev. B1 power-off   Erik Benada
• [RFC,PATCH 3/7 v2] arm/versatile: use generic struct clk   Jeremy Kerr
• [PATCH] RFC: make struct platform_driver.id_table const   Ben Dooks
• [PATCH] ARM: SAMSUNG: Fix null pointer dereference in ADC driver   Ben Dooks
• whoever is using ymiao3 at marvell.com please stop it   Ben Dooks
• S3C/SAMSUNG: clock fixes and updates   Ben Dooks
• [PATCH] ARM: SAMSUNG: Fix bad use of __initdata for s3c_register_clocks()   Ben Dooks
• [PATCH] ARM: SAMSUNG: Add documentation to the clock registration calls.   Ben Dooks
• [PATCH] ARM: SAMSUNG: Add error printing to s3c24xx_register_clocks   Ben Dooks
• Updated next-samsung available   Ben Dooks
• [PATCH] RFC: make struct platform_driver.id_table const   Vikram Dhillon
• [PATCH] mach-orion5x: D-link DNS-323 rev. B1 power-off   Nicolas Pitre
• [PATCH] mach-orion5x: D-link DNS-323 rev. B1 power-off   Erik Benada
• [PATCH] mach-orion5x: D-link DNS-323 rev. B1 power-off   Nicolas Pitre
• Default machine include placements   Ben Dooks
• Cortex-m3 Kernel Port.   Sasa Sasa
• [PATCH] ARM: L2 : Add maintainace by line helper functions   Shilimkar, Santosh
• [PATCH] RFC: make struct platform_driver.id_table const   Uwe Kleine-König
• [PATCH 1/2 RESEND#2] i2c/pxa: remove unused macro   Uwe Kleine-König
• [PATCH] ARM: Remove the unused RealView mmc1 data structure.   Colin Tuckley
• [PATCH 4/4] ARM: S3C64XX: Add s3c64xx support to touchscreen driver   Maurus Cuelenaere
• [PATCH 4/4] ARM: S3C64XX: Add s3c64xx support to touchscreen driver   Arnaud Patard (Rtp)
• Default machine include placements   Russell King - ARM Linux
• [PATCH] mmp2: add mask function in irq   Haojian Zhuang
• [PATCH] mmp2: add mfpr setting   Haojian Zhuang
• [PATCH] mmp2: add gpio initialization   Haojian Zhuang
• [PATCH] mmp2: append board irq events   Haojian Zhuang
• [PATCH 4/4] ARM: S3C64XX: Add s3c64xx support to touchscreen driver   Arnaud Patard (Rtp)
• Default machine include placements   Ben Dooks
• Default machine include placements   Daniel Silverstone
• [PATCH 4/4] ARM: S3C64XX: Add s3c64xx support to touchscreen driver   Maurus Cuelenaere
• Default machine include placements   Ben Dooks
• Default machine include placements   Ben Dooks
• Default machine include placements   Daniel Silverstone
• [PATCH 2/2] mx25: properly initialize clocks, fix time accounting   Baruch Siach
• Default machine include placements   Ben Dooks
• Default machine include placements   Mark Brown
• [PATCH 1/4] mx25: remove unused mx25_clocks_init() argument   Baruch Siach
• [PATCH 2/4] mx25: properly initialize clocks   Baruch Siach
• [PATCH 3/4] mx25: fix time accounting   Baruch Siach
• [PATCH 4/4] mx25: make the FEC AHB clk secondary of the IPG   Baruch Siach
• Default machine include placements   Russell King - ARM Linux
• [PATCH 01/01] regulator: support max8649   Haojian Zhuang
• [PATCH 1/4] mmp2: add mask function in irq   Haojian Zhuang
• [PATCH 2/4] mmp2: add mfpr setting   Haojian Zhuang
• [PATCH 3/4] mmp2: add gpio initialization   Haojian Zhuang
• [PATCH 4/4] mmp2: append board irq events   Haojian Zhuang
• Cortex-m3 Kernel Port.   Catalin Marinas
• [PATCH 1/4] mfd: update i2c driver for max8925   Haojian Zhuang
• [PATCH 2/4] mfd: update irq handler in max8925   Haojian Zhuang
• [PATCH 3/4] rtc: enable rtc in max8925   Haojian Zhuang
• [PATCH 4/4] power_supply: enable power supply of max8925   Haojian Zhuang
• [PATCH 3/4] mx25: fix time accounting   Lothar Waßmann
• Default machine include placements   Russell King - ARM Linux
• Cortex-m3 Kernel Port.   Jamie Lokier
• [PATCH 3/4] fec: add support for Freescale i.MX25 PDK (3DS)   Baruch Siach
• [PATCH 3/4] rtc: enable rtc in max8925   Alessandro Zummo
• [PATCH] mfd: update i2c driver for max8925   Haojian Zhuang
• [PATCH] mfd: update irq handler in max8925   Haojian Zhuang
• [PATCH] rtc: enable rtc in max8925   Haojian Zhuang
• [PATCH] rtc: enable rtc in max8925   Haojian Zhuang
• Cortex-m3 Kernel Port.   Catalin Marinas
• Default machine include placements   Ben Dooks
• Default machine include placements   Ben Dooks
• [PATCH 3/4] rtc: enable rtc in max8925   Haojian Zhuang
• too much memory for node   Ben Dooks
• [PATCH 2/4] mfd: update irq handler in max8925   Mark Brown
• Default machine include placements   Russell King - ARM Linux
• [PATCH 3/4] rtc: enable rtc in max8925   Alessandro Zummo
• [PATCH 4/4] power_supply: enable power supply of max8925   Mark Brown
• [PATCH] ARM: RealView SD/MMC Card detection and write-protect using GPIOLIB   Colin Tuckley
• Default machine include placements   Ben Dooks
• [PATCH 01/01] regulator: support max8649   Mark Brown
• Default machine include placements   Ben Dooks
• [PULL] Please pull bjdooks' for-rmk/samsung2   Ben Dooks
• [PULL] Please pull bjdooks' for-rmk/samsung2   Russell King - ARM Linux
• Default machine include placements   Russell King - ARM Linux
• [PATCH 3/4] mx25: fix time accounting   Baruch Siach
• [PATCH] imxfb: correct location of callbacks in suspend and resume   Uwe Kleine-König
• [PATCH] power_supply: enable power supply of max8925   Haojian Zhuang
• [RFC 17/18] arm: mm: Add SW emulation for ARM domain manager feature   Catalin Marinas
• [RFC 17/18] arm: mm: Add SW emulation for ARM domain manager feature   Nicolas Pitre
• [PATCH] locomo.c: fix missing spin_unlock_irqrestore   H Hartley Sweeten
• [PATCH] mx2/mx3: debug-macro.S needs deprecated symbols   Uwe Kleine-König
• change boot requirements [Was: make PHYS_OFFSET determined at run time (unfinished)]   Uwe Kleine-König
• [PATCH] spinlock: don't use deprecated barriers on ARMv7   Rabin Vincent
• [PATCH] spinlock: don't use deprecated barriers on ARMv7   Russell King - ARM Linux
• [PATCH] ARM: RealView SD/MMC Card detection and write-protect using GPIOLIB   Russell King - ARM Linux
• [PATCH] ARM: Remove the unused RealView mmc1 data structure.   Russell King - ARM Linux
• [PATCH 2/2] omap: define _toggle_gpio_edge_triggering only for OMAP1   Kevin Hilman
• [RFC 17/18] arm: mm: Add SW emulation for ARM domain manager feature   Daniel Walker
• change boot requirements [Was: make PHYS_OFFSET determined at run time (unfinished)]   Ryan Mallon
• [PATCH] Flush dcache before writing into page to avoid alias   Andrew Morton
• [PATCH] Flush dcache before writing into page to avoid alias   Russell King - ARM Linux
• [PATCH] RFC: make struct platform_driver.id_table const   Vikram Dhillon
• Default machine include placements   Ben Dooks
• [PATCH 2/2] omap: define _toggle_gpio_edge_triggering only for OMAP1   Tony Lindgren
• [GIT PULL] omap-fixes for 2.6.33-rc5   Tony Lindgren
• [PATCH] Flush dcache before writing into page to avoid alias   anfei zhou
• whoever is using ymiao3 at marvell.com please stop it   Eric Miao
• [PATCH 2/4] mfd: update irq handler in max8925   Haojian Zhuang
• [PATCH 4/4] power_supply: enable power supply of max8925   Haojian Zhuang
• [PATCH 2/4] mfd: update irq handler in max8925   Haojian Zhuang
• gpio_keys and how PXA27x sets gpio_set_wake() (was Re: sharp c-3000 aka spitz: fix warn_on introduced in 2.6.32-rc1)   Eric Miao
• whoever is using ymiao3 at marvell.com please stop it   Ben Dooks
• Samsung: New driver for AC97 controllers   jassisinghbrar at gmail.com
• [PATCH 1/3] ARM: S3C64XX: Add AC97 platform resources   jassisinghbrar at gmail.com
• [PATCH 2/3] ASoC: AC97: S3C: Add controller driver   jassisinghbrar at gmail.com
• [PATCH 3/3] ARM: SMDK64XX: Enable AC97 device   jassisinghbrar at gmail.com
• [PATCH] RFC: make struct platform_driver.id_table const   Eric Miao
• Samsung: New driver for AC97 controllers   jassi brar
• [PATCH 01/01] regulator: support max8649   Haojian Zhuang
• S3C6410/S3C6400 platform squash   Ben Dooks
• [PATCH] ARM: S3C64XX: Merge mach-s3c6400 and mach-s3c6410   Ben Dooks
• [PATCH] ARM: S3C64XX: Remove useless IO descriptor from S3C6410   Ben Dooks
• [PATCH] ARM: S3C64XX: Squash SDHCI setup into one file   Ben Dooks
• [PATCH] ARM: S3C64XX: Move GPIO bank number includes into machine include directory   Ben Dooks
• [PATCH] ARM: S3C64XX: Move register definition headers to machine include directory   Ben Dooks
• [PATCH] ARM: S3C64XX: Move IRQ support into mach-s3c64xx   Ben Dooks
• [PATCH] ARM: S3C64XX: Move device files into mach-s3c64xx   Ben Dooks
• [PATCH] ARM: S3C64XX: Move device setup support to mach-s3c64xx   Ben Dooks
• [PATCH] ARM: S3C64XX: Move cpu, clock and gpiolib and PM support to mach-s3c64xx   Ben Dooks
• [PATCH] ARM: S3C64XX: Merge s3c6400-init.c into cpu.c   Ben Dooks
• [PATCH] ARM: S3C64XX: Move CPUfreq and DMA support to the mach-s3c64xx directory   Ben Dooks
• [PATCH] ARM: S3C64XX: Merge s3c6400-clock.c and clock.c into mach-s3c64xx   Ben Dooks
• [PATCH] ARM: S3C64XX: Combine the clock init code   Ben Dooks
• [PATCH] ARM: S3C64XX: Remove plat-s3c64xx Kconfig and PLAT_S3C64XX   Ben Dooks
• [PATCH 2/3] ASoC: AC97: S3C: Add controller driver   jassi brar
• measureing kernel & application boottime's   Linus Walleij
• S3C2440/S3C2442 merge   Ben Dooks
• [PATCH] ARM: S3C24XX: Merge s3c2442 and s3c2440 machines into mach-s3c2440   Ben Dooks
• [PATCH] ARM: S3C2442: Merge s3c2442.c and clock.c   Ben Dooks
• [PATCH] ARM: S3C2440: Fix SMDK2440 SoC selection   Ben Dooks
• [PATCH] ARM: S3C244X: Move S3C2442 code into S3C2440   Ben Dooks
• [PATCH] ARM: S3C24XX: Remove old mach-s3c2442   Ben Dooks
• [PATCH] ARM: S3C24XX: Move S3C2440/S3C2442 support from plat-s3c24xx to mach-s3c2440   Ben Dooks
• [PATCH] ARM: S3C244X: Merge <plat/s3c2440.h> and <plat/s3c2442.h> into <plat/s3c244x.h>   Ben Dooks
• [PULL] Please pull bjdooks' for-rmk/samsung3   Ben Dooks
• [PATCH] ARM: RealView SD/MMC Card detection and write-protect using GPIOLIB   Colin Tuckley
• S5PC100 squashing   Ben Dooks
• [PATCH] RFC: make struct platform_driver.id_table const   Uwe Kleine-König
• [PATCH] RFC: make struct platform_driver.id_table const   Eric Miao
• SMDK6410 defconfig updates   Ben Dooks
• [PATCH] ARM: S3C6400: Update s3c6400_defconfig for bigger initrds for SMDK6410   Ben Dooks
• [PATCH] ARM: S3C64XX: Update s3c6400_defconfig for current kernel   Ben Dooks
• S5PC100 squashing   Marek Szyprowski
• [PATCH v2] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Dmitry Torokhov
• [PATCH 1/3] ARM: S3C64XX: Add AC97 platform resources   Mark Brown
• gpio_keys and how PXA27x sets gpio_set_wake() (was Re: sharp c-3000 aka spitz: fix warn_on introduced in 2.6.32-rc1)   Stanislav Brabec
• [PATCH] ARM: Always generate the IT instruction when compiling for Thumb-2   Catalin Marinas
• [PATCH 3/3] ARM: SMDK64XX: Enable AC97 device   Mark Brown
• gpio_keys and how PXA27x sets gpio_set_wake() (was Re: sharp c-3000 aka spitz: fix warn_on introduced in 2.6.32-rc1)   Eric Miao
• [PATCH 2/3] ASoC: AC97: S3C: Add controller driver   Ben Dooks
• [PATCH 2/4] mmp2: add mfpr setting   Eric Miao
• [PATCH v2] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Alberto Panizzo
• [PATCH] ARM: IMX31: configure pins iomux for SDHC setup on litekit board.   Vladimir Zapolskiy
• gpio_keys and how PXA27x sets gpio_set_wake() (was Re: sharp c-3000 aka spitz: fix warn_on introduced in 2.6.32-rc1)   Stanislav Brabec
• [PATCH 2/3] ASoC: AC97: S3C: Add controller driver   Mark Brown
• [PATCH] ARM: IMX31: configure pins iomux for SDHC setup on litekit board.   Daniel Mack
• [PATCH 3/3] ARM: SMDK64XX: Enable AC97 device   jassi brar
• [PATCH 2/3] ASoC: AC97: S3C: Add controller driver   Mark Brown
• [PATCH] ARM: IMX31: configure pins iomux for SDHC setup on litekit board.   Vladimir Zapolskiy
• [PATCH 3/3] ARM: SMDK64XX: Enable AC97 device   Mark Brown
• [PATCH v2] ARM: IMX31: configure pins iomux for SDHC setup on litekit board.   Vladimir Zapolskiy
• [PATCH 01/01] regulator: support max8649   Liam Girdwood
• [PATCH 2/3] ASoC: AC97: S3C: Add controller driver   jassi brar
• [PATCH 01/01] regulator: support max8649   Mark Brown
• [PATCH 2/3] ASoC: AC97: S3C: Add controller driver   Mark Brown
• [PATCH 1/2] ARM: SAMSUNG: Move HWMON from plat-s3c24xx to plat-samsung   Maurus Cuelenaere
• [PATCH 2/2] HWMON: Add s3c64xx support to s3c-hwmon   Maurus Cuelenaere
• [PATCH 2/3] ASoC: AC97: S3C: Add controller driver   jassi brar
• gpio_keys and how PXA27x sets gpio_set_wake() (was Re: sharp c-3000 aka spitz: fix warn_on introduced in 2.6.32-rc1)   Dmitry Eremin-Solenikov
• [PATCH 2/4] mfd: update irq handler in max8925   Mark Brown
• [PATCH 2/4] mfd: update irq handler in max8925   Haojian Zhuang
• whoever is using ymiao3 at marvell.com please stop it   Uwe Kleine-König
• gpio_keys and how PXA27x sets gpio_set_wake() (was Re: sharp c-3000 aka spitz: fix warn_on introduced in 2.6.32-rc1)   Eric Miao
• [PATCH 2/4] mmp2: add mfpr setting   Haojian Zhuang
• [PATCH 2/3] ASoC: AC97: S3C: Add controller driver   jassi brar
• [PATCH 01/01] regulator: support max8649   Haojian Zhuang
• [PATCH 2/3] ASoC: AC97: S3C: Add controller driver   Mark Brown
• [PATCH 01/01] regulator: support max8649   Haojian Zhuang
• [PATCH 2/3] ASoC: AC97: S3C: Add controller driver   jassi brar
• whoever is using ymiao3 at marvell.com please stop it   Mark Brown
• [PATCH 01/01] regulator: support max8649   Mark Brown
• [PATCH 2/3] ASoC: AC97: S3C: Add controller driver   Mark Brown
• [PATCH 2/4] mfd: update irq handler in max8925   Mark Brown
• [PATCH 2/3] ASoC: AC97: S3C: Add controller driver   jassi brar
• [PATCH 01/01] regulator: support max8649   Haojian Zhuang
• [PATCH 01/01] regulator: support max8649   Mark Brown
• [PATCH 1/2 v2] ARM: SAMSUNG: Move HWMON from plat-s3c24xx to plat-samsung   Maurus Cuelenaere
• gpio_keys and how PXA27x sets gpio_set_wake() (was Re: sharp c-3000 aka spitz: fix warn_on introduced in 2.6.32-rc1)   Stanislav Brabec
• [PATCH 2/3] ASoC: AC97: S3C: Add controller driver   Mark Brown
• [PATCH 1/2] ARM: SAMSUNG: Move HWMON from plat-s3c24xx to plat-samsung   Ben Dooks
• [PATCH 0/4] Add s3c64xx support to touchscreen driver   Ben Dooks
• [PATCH 1/4] ARM: SAMSUNG: Move mach/ts.h to plat/ts.h   Ben Dooks
• [PATCH 2/4] ARM: SAMSUNG: Rename s3c24xx touchscreen interface to s3c   Ben Dooks
• [PATCH 4/4] ARM: S3C64XX: Add s3c64xx support to touchscreen driver   Ben Dooks
• Limited avaialability starting Friday   Ben Dooks
• [PATCH 2/4] ARM: SAMSUNG: Rename s3c24xx touchscreen interface to s3c   Maurus Cuelenaere
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Tomasz Fujak
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jamie Iles
• [PATCH 01/01] regulator: support max8649   Liam Girdwood
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jean Pihet
• whoever is using ymiao3 at marvell.com please stop it   Joe Perches
• [PATCH 2/4] omap: Make uncompress code and DEBUG_LL code generic   Tony Lindgren
• [PATCH/RFC] arm: Enable backtrace printing on oops when PC iscorrupted   Catalin Marinas
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jean Pihet
• [PATCH v2] ARM: IMX31: configure pins iomux for SDHC setup on litekit board.   Sascha Hauer
• [PATCH] mx2/mx3: debug-macro.S needs deprecated symbols   Sascha Hauer
• cache flushing for armv3 in zImage   Uwe Kleine-König
• [PATCH 0/3] Add tmp register for debug-macro.S, do not select CPU_32v6K for omap2   Tony Lindgren
• [PATCH 1/3] ARM: Add tmp register for addruart and loadsp   Tony Lindgren
• [PATCH 2/3] ARM: Add tmp register for debug-macro.S files   Tony Lindgren
• [PATCH 3/3] ARM: Select CPU_32v6K for CPU_V7 only if ARCH_OMAP2 is not selected   Tony Lindgren
• [PATCH 00/14] omap DEBUG_LL and multiboot changes for 2.6.34   Tony Lindgren
• [PATCH 01/14] omap: Clean the serial port defines   Tony Lindgren
• [PATCH 02/14] omap: Make uncompress code and DEBUG_LL code generic   Tony Lindgren
• [PATCH 03/14] omap: Remove old DEBUG_LL serial port options   Tony Lindgren
• [PATCH 04/14] omap2/3: Make get_irqnr_and_base common for mach-omap2 multiboot   Tony Lindgren
• [PATCH 05/14] omap2/3: Multiboot compile fixes to compile in omap2 and omap3   Tony Lindgren
• [PATCH 06/14] omap: Fix dmtimer.c for multi-omap boot   Tony Lindgren
• [PATCH 07/14] omap2/3/4: Fix omap2_map_common_io for multi-omap   Tony Lindgren
• [PATCH 08/14] omap2/3/4: Fix mbox init for multi-omap   Tony Lindgren
• [PATCH 09/14] omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2   Tony Lindgren
• [PATCH 10/14] omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3   Tony Lindgren
• [PATCH 11/14] omap2/3/4: Replace orred CONFIG_ARCH_OMAP2/3/4 with CONFIG_ARCH_OMAP2PLUS   Tony Lindgren
• [PATCH 12/14] omap2/3: Fix initcalls for multi-omap   Tony Lindgren
• [PATCH 13/14] omap2/3: Fix powerdomain init for multiomap   Tony Lindgren
• [PATCH 14/14] omap2/3: Update omap3_defconfig to build in all the 2420 based boards   Tony Lindgren
• cache flushing for armv3 in zImage   Russell King - ARM Linux
• cache flushing for armv3 in zImage   Uwe Kleine-König
• [PATCH 1/4] zImage: fix comments for cache_on, cache_off and cache_clean_flush   Uwe Kleine-König
• [PATCH 2/4] zImage: some comments for __armv3_mpu_cache_on   Uwe Kleine-König
• [PATCH 3/4] zImage: __armv3_mpu_cache_flush: respect should-be-zero specification   Uwe Kleine-König
• [PATCH 4/4] zImage: annotate debug functions about corrupted registers   Uwe Kleine-König
• [PATCH 00/10] ARM: LPC32XX: New architecture support   Kevin Wells
• [PATCH 00/10] ARM: LPC32XX: New architecture support   Kevin Wells
• [PATCH 1/2 v3] ARM: SAMSUNG: Move HWMON from plat-s3c24xx to plat-samsung   Maurus Cuelenaere
• [PATCH 1/4 v2] ARM: SAMSUNG: Move mach/ts.h to plat/ts.h   Maurus Cuelenaere
• [PATCH 01/10] ARM: LPC32XX: Changes to existing files to support the LPC32XX architecture   Kevin Wells
• [PATCH 02/10] ARM: LPC32XX: arch Kconfig, platform Kconfig, and makefiles   Kevin Wells
• [PATCH 03/10] ARM: LPC32XX: core architecture files   Kevin Wells
• [PATCH v3] OMAP3 clock: split out DPLL3 M2 divider functions into mach-omap2/clkt34xx_dpll3m2.c   Paul Walmsley
• [PATCH 04/10] ARM: LPC32XX: common architecture functions and structures   Kevin Wells
• [PATCH 05/10] ARM: LPC32XX: clock tree support   Kevin Wells
• [PATCH 06/10] ARM: LPC32XX: power and event management   Kevin Wells
• [PATCH 07/10] ARM: LPC32XX: Phytec PHY3250 platform support file   Kevin Wells
• [PATCH 08/10] ARM: LPC32XX: uncompress output and printascii() output functions   Kevin Wells
• [PATCH 09/10] ARM: LPC32XX: architecture header files   Kevin Wells
• [PATCH 10/10] ARM: LPC32XX: Phytec PHY3250 default kernel config   Kevin Wells
• [PATCH 01/10] ARM: LPC32XX: Changes to existing files to support the LPC32XX architecture   Ben Dooks
• [PATCH 2/4] ARM: SAMSUNG: Rename s3c24xx touchscreen interface to s3c   Maurus Cuelenaere
• [PATCH 2/4] ARM: SAMSUNG: Rename s3c24xx touchscreen interface to s3c   jassi brar
• [PATCH 03/10] ARM: LPC32XX: core architecture files   Ben Dooks
• [PATCH 2/2] HWMON: Add s3c64xx support to s3c-hwmon   Ben Dooks
• [PATCH 03/10] ARM: LPC32XX: core architecture files   H Hartley Sweeten
• [PATCH 13/14] omap2/3: Fix powerdomain init for multiomap   Paul Walmsley
• [PATCH 13/14] omap2/3: Fix powerdomain init for multiomap   Tony Lindgren
• [PATCH 2/3] ASoC: AC97: S3C: Add controller driver   jassi brar
• [PATCH] OMAP2+ powerdomains/clockdomains: prepare for multi-OMAP configs   Paul Walmsley
• [PATCH 02/10] ARM: LPC32XX: arch Kconfig, platform Kconfig, and makefiles   Baruch Siach
• Git pull request: Orion/Kirkwood fixes for 2.6.33-rc   Nicolas Pitre
• [GIT PULL] OMAP: First set of clock/clockdomain/powerdomain/hwmod patches for 2.6.34   Paul Walmsley
• [Rev2]Samsung: New driver for AC97 controllers   jassisinghbrar at gmail.com
• [PATCHv2 01/10] ARM: S3C2443: GPIO: Correct AC97 pin defines   jassisinghbrar at gmail.com
• [PATCHv2 02/10] ARM: S3C64XX: Add AC97 platform resources   jassisinghbrar at gmail.com
• [PATCHv2 03/10] ARM: S3C24XX: Update AC97 platform resources   jassisinghbrar at gmail.com
• [PATCHv2 04/10] ASoC: AC97: S3C: Add controller driver   jassisinghbrar at gmail.com
• [PATCHv2 05/10] ASoC: AC97: SMDK: Add wm9713 machine driver   jassisinghbrar at gmail.com
• [PATCHv2 06/10] ARM: SMDK64XX: Enable AC97 device   jassisinghbrar at gmail.com
• [PATCHv2 07/10] ASoC: AC97: SMDK2443: Switch to s3c-ac97.c   jassisinghbrar at gmail.com
• [PATCHv2 08/10] ARM: SMDK2443: Enable AC97 device   jassisinghbrar at gmail.com
• [PATCHv2 09/10] ASoC: AC97: LN2440SBC: Switch to s3c-ac97.c   jassisinghbrar at gmail.com
• [PATCH 2/4] mfd: update irq handler in max8925   Haojian Zhuang
• [PATCHv2 10/10] ASoC: AC97: S3C2443: Remove unused driver   jassisinghbrar at gmail.com
• [PATCH 1/1] mmp2: add handling on PMIC IRQ   Haojian Zhuang
• [lm-sensors] [PATCH 2/2] HWMON: Add s3c64xx support to s3c-hwmon   Jean Delvare
• [PATCHv2 01/10] ARM: S3C2443: GPIO: Correct AC97 pin defines   Ben Dooks
• [PATCHv2 01/10] ARM: S3C2443: GPIO: Correct AC97 pin defines   jassi brar
• [PATCHv2 01/10] ARM: S3C2443: GPIO: Correct AC97 pin defines   Ben Dooks
• [PATCHv2 01/10] ARM: S3C2443: GPIO: Correct AC97 pin defines   jassi brar
• [PATCH v3] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Alberto Panizzo
• [PATCH v4 1/8] ARM: S5PV210: Add Samsung S5PV210 CPU support   Kukjin Kim
• [PATCH v4 2/8] ARM: S5PV210: Add clock support for S5PV210   Kukjin Kim
• [PATCH v4 3/8] ARM: S5PV210: Add IRQ support   Kukjin Kim
• [PATCH v4 4/8] ARM: S5PV210: Update Kconfig and Makefiles   Kukjin Kim
• [PATCH v4 5/8] ARM: S5PV210: Add SMDKV210 board support file   Kukjin Kim
• [PATCH v4 6/8] ARM: S5PV210: Add SMDKC110 board support file   Kukjin Kim
• [PATCH v4 7/8] ARM: S5PV210: Add S5PV210 configuration file   Kukjin Kim
• [PATCH v4 8/8] ARM: S5PV210: Add S5PC110 configuration file   Kukjin Kim
• [PATCH v3 0/9] ARM: S5PV210: Add support for Samsung's S5PV210 CPU   Kukjin Kim
• [PATCH v4 0/8] ARM: S5PV210: Add support for Samsung's S5PV210 CPU   Kukjin Kim
• defining ZRELADDR as PHYS_OFFSET + TEXT_OFFSET   Uwe Kleine-König
• [PATCH 2/3] ASoC: AC97: S3C: Add controller driver   Mark Brown
• [PATCHv2 01/10] ARM: S3C2443: GPIO: Correct AC97 pin defines   Mark Brown
• [PATCH v3] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Lothar Waßmann
• [PATCHv2 01/10] ARM: S3C2443: GPIO: Correct AC97 pin defines   jassi brar
• [PATCHv2 02/10] ARM: S3C64XX: Add AC97 platform resources   Mark Brown
• [PATCHv2 03/10] ARM: S3C24XX: Update AC97 platform resources   Mark Brown
• [PATCH v4 4/8] ARM: S5PV210: Update Kconfig and Makefiles   Marek Szyprowski
• [PATCHv2 06/10] ARM: SMDK64XX: Enable AC97 device   Mark Brown
• [PATCH v3] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Uwe Kleine-König
• [PATCHv2 08/10] ARM: SMDK2443: Enable AC97 device   Mark Brown
• [PATCH v4 4/8] ARM: S5PV210: Update Kconfig and Makefiles   Ben Dooks
• [Rev2]Samsung: New driver for AC97 controllers   Mark Brown
• [PATCH 2/4] mfd: update irq handler in max8925   Mark Brown
• [PATCH 00/10] ARM: LPC32XX: New architecture support   Luotao Fu
• [PATCH v1 1/1] Extended events (platform-specific) support in perf   Peter Zijlstra
• [PATCH 1/4] mmp2: add mask function in irq   Eric Miao
• [PATCH v3] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Alberto Panizzo
• [PATCH v3] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Alberto Panizzo
• [PATCH v3] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Lothar Waßmann
• [PATCH 2/4] mmp2: add mfpr setting   Eric Miao
• [PATCH 0/3] RTC driver for i.MX25   Baruch Siach
• [PATCH 1/3] rtc: driver for the DryIce block found in i.MX25 chips   Baruch Siach
• [PATCH 2/3] mx25: add support for the DryIce rtc   Baruch Siach
• [PATCH 3/3] mx25pdk: platform code for the DryIce RTC module   Baruch Siach
• [PATCH 1/3] rtc: driver for the DryIce block found in i.MX25 chips   Lothar Waßmann
• [PATCH] mmp2: add handling on PMIC IRQ   Haojian Zhuang
• [PATCH 1/3] ARM: S3C2412: SoC has the fractional baud rate register   Michel Pollet
• [PATCH 2/3] ARM: S3C: Configuration override for UART names   Michel Pollet
• [PATCH 3/3] ARM: S3C: Kconfig option related to UART dev names   Michel Pollet
• [PATCH v3] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Alberto Panizzo
• [PATCH v3] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Lothar Waßmann
• [PATCH 1/3] ARM: S3C2412: SoC has the fractional baud rate register   Ben Dooks
• [PATCH 3/3] ARM: S3C: Kconfig option related to UART dev names   Ben Dooks
• [PATCH 2/3] ARM: S3C: Configuration override for UART names   Ben Dooks
• [PATCH 2/3] ARM: S3C: Configuration override for UART names   M P
• [PATCH v3] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Alberto Panizzo
• [patch 0/2] at91_udc driver: read_fifo timing issue + use spinlocks   Harro Haan
• [patch 1/2] at91_udc.c read_fifo timing issue   Harro Haan
• [patch 2/2] at91_udc.c use spinlocks instead of local_irq_xxx   Harro Haan
• [PATCH 1/2] ARM: S3C2412: SoC has the fractional baud rate register   Michel Pollet
• [PATCH 2/2] ARM: S3C: Configuration override for UART names   Michel Pollet
• ARM11 MPCore: Adding nop to __delay() doubles the BogoMIPS/lpj   Dirk Behme
• [PATCH v3] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Lothar Waßmann
• spitz (arm pda): time no longer ok after resume   Pavel Machek
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Will Deacon
• [PATCH v3] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Dmitry Torokhov
• [patch 2/2] at91_udc.c use spinlocks instead of local_irq_xxx   H Hartley Sweeten
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jean Pihet
• [PATCH v3] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Alberto Panizzo
• [PATCH v4] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Alberto Panizzo
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Will Deacon
• spitz (arm pda): time no longer ok after resume   Russell King - ARM Linux
• [PATCH 03/10] ARM: LPC32XX: core architecture files   Kevin Wells
• [PATCH v4] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Dmitry Torokhov
• [PATCH 0/5] Arm Gic Changes   adharmap at codeaurora.org
• [PATCH 1/5] gic: prevent gic from crossing NR_IRQ   adharmap at codeaurora.org
• [PATCH 2/5] gic: add callback for mask_ack   adharmap at codeaurora.org
• [PATCH 3/5] gic: Add set_type callback   adharmap at codeaurora.org
• [PATCH 4/5] gic: dont disable INT in ack callback   adharmap at codeaurora.org
• [RFC PATCH 5/5] gic: initialize interrupts as per argument   adharmap at codeaurora.org
• [PATCH v4] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Alberto Panizzo
• [Rev2]Samsung: New driver for AC97 controllers   Mark Brown
• [PATCH 2/2] ARM: S3C: Configuration override for UART names   Russell King - ARM Linux
• [PATCH 1/3] rtc: driver for the DryIce block found in i.MX25 chips   Russell King - ARM Linux
• [PATCH] Flush dcache before writing into page to avoid alias   Sebastian Andrzej Siewior
• [PATCH] ARM: Always generate the IT instruction when compiling for Thumb-2   Russell King - ARM Linux
• [PATCH] Flush dcache before writing into page to avoid alias   Andrew Morton
• [PATCH 1/5] gic: prevent gic from crossing NR_IRQ   Russell King - ARM Linux
• [Rev2]Samsung: New driver for AC97 controllers   jassi brar
• [PATCH 3/5] gic: Add set_type callback   Russell King - ARM Linux
• [PATCH 3/5] gic: Add set_type callback   Russell King - ARM Linux
• [RFC PATCH 5/5] gic: initialize interrupts as per argument   Russell King - ARM Linux
• [PATCH] ARM: MM: Add ARM_L1_CACHE_SHIFT_BY6 for handle inside each ARCH Kconfig   Kukjin Kim
• [PATCH] imxfb: correct location of callbacks in suspend and resume   Andrew Morton
• [PATCH] ARM: MM: Add ARM_L1_CACHE_SHIFT_BY6 for handle inside each ARCH Kconfig   Russell King - ARM Linux
• [PATCH 1/2 RE-SEND] ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig   Kukjin Kim
• [PATCH 2/2] ARM: S5PC1XX: Add ARM_L1_CACHE_SHIFT_6 in ARCH_S5PC1XX   Kukjin Kim
• defining ZRELADDR as PHYS_OFFSET + TEXT_OFFSET   Russell King - ARM Linux
• [PATCH 1/2 RE-SEND] ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig   Ben Dooks
• [PATCH 2/2] ARM: S5PC1XX: Add ARM_L1_CACHE_SHIFT_6 in ARCH_S5PC1XX   Ben Dooks
• [PATCH 0/5] Arm Gic Changes   Ben Dooks
• [PATCH] RFC: make struct platform_driver.id_table const   Greg KH
• [PATCH RE-SEND-2] ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig   Kukjin Kim
• LPC32XX architecture files (updated)   wellsk40 at gmail.com
• [PATCH 01/13] i2c_pnx: Added Kconfig support for the LCP32XX   wellsk40 at gmail.com
• [PATCH 02/13] pnx4008_wdt: Added Kconfig support for the LPC32XX   wellsk40 at gmail.com
• [PATCH 03/13] amba clcd: Swapped CTRL/IENB registers for LCP32XX   wellsk40 at gmail.com
• [PATCH 04/13] ARM: LPC32XX arch support in Kconfig and Makefile   wellsk40 at gmail.com
• [PATCH 05/13] ARM: LPC32XX: arch Kconfig, plat Kconfig, and makefiles   wellsk40 at gmail.com
• [PATCH 06/13] ARM: LPC32XX: Core architecture files   wellsk40 at gmail.com
• [PATCH 07/13] ARM: LPC32XX: common architecture functions and structures   wellsk40 at gmail.com
• [PATCH 08/13] ARM: LPC32XX: clock tree support   wellsk40 at gmail.com
• [PATCH 09/13] ARM: LPC32XX: power and event management   wellsk40 at gmail.com
• [PATCH 10/13] ARM: LPC32XX: Phytec PHY3250 platform support file   wellsk40 at gmail.com
• [PATCH 11/13] ARM: LPC32XX: printascii() output and irq support functions   wellsk40 at gmail.com
• [PATCH 12/13] ARM: LPC32XX: architecture header files   wellsk40 at gmail.com
• [PATCH 13/13] ARM: LPC32XX: Phytec PHY3250 default kernel config (ramdisk)   wellsk40 at gmail.com
• [PATCH 3/5] gic: Add set_type callback   Abhijeet Dharmapurikar
• [PATCH] Mailbox: Check valid registered callback before calling   Fernando Guzman Lugo
• [PATCHv2 06/10] ARM: SMDK64XX: Enable AC97 device   Ben Dooks
• [PATCHv2 06/10] ARM: SMDK64XX: Enable AC97 device   jassi brar
• [PATCHv2 06/10] ARM: SMDK64XX: Enable AC97 device   jassi brar
• spitz (arm pda): time no longer ok after resume   Pavel Machek
• Problems with device compilation by subsystem config   Ben Dooks
• [PATCH] ARM: S3C64XX: Move to using library build for device definitions   Ben Dooks
• [PATCH] ARM: S3C64XX: SPI: Make platform device build selectable   jassisinghbrar at gmail.com
• Problems with device compilation by subsystem config   jassi brar
• [PATCH] imxfb: correct location of callbacks in suspend and resume   Uwe Kleine-König
• [PATCH] ARM: S3C64XX: SPI: Make platform device build selectable   Ben Dooks
• [PATCH v4] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Dmitry Torokhov
• [PATCH] ARM: S3C64XX: SPI: Make platform device build selectable   jassi brar
• [PATCHv2] ARM: S3C64XX: SPI: Make platform device compilation selectable   jassisinghbrar at gmail.com
• [PATCH] imxfb: correct location of callbacks in suspend and resume   Andrew Morton
• RFC: change device building for s3c24xx/s3c64xx/s5p series   Ben Dooks
• [PATCHv2] ARM: S3C64XX: SPI: Make platform device compilation selectable   Ben Dooks
• [PATCH] ARM: S3C64XX: Audio: Make platform device compilation selectable   jassisinghbrar at gmail.com
• [PATCHv3 06/10] ARM: SMDK64XX: Enable AC97 device   jassisinghbrar at gmail.com
• [PATCH]NUC900 LCD Controller Driver   Qiang Wang
• [PATCHv2] ARM: S3C64XX: SPI: Make platform device compilation selectable   Uwe Kleine-König
• [PATCHv2] ARM: S3C64XX: SPI: Make platform device compilation selectable   jassi brar
• [PATCHv2] ARM: S3C64XX: SPI: Make platform device compilation selectable   Uwe Kleine-König
• Problems with device compilation by subsystem config   Mark Brown
• [PATCH/RFC v2 0/3] Human readable platform-specific performance event support   Tomasz Fujak
• [PATCH/RFC v2 1/3] perfevents: Added performance event structure definition, export event description in the debugfs "perf_events_platform" file   Tomasz Fujak
• [PATCH/RFC v2 2/3] [ARM] perfevents: Event description for ARMv6, Cortex-A8 and Cortex-A9 exported   Tomasz Fujak
• [PATCH/RFC v2 3/3] perf: Extended events (platform-specific) support in perf   Tomasz Fujak
• IRQF_VALID   Magnus Damm
• [PATCH] ARM: Correct the FPSCR bits setting when raising exceptions   Catalin Marinas
• [PATCH/RFC v2 0/3] Human readable platform-specific performance event support   Peter Zijlstra
• [PATCH 3/3] ARM: Select CPU_32v6K for CPU_V7 only if ARCH_OMAP2 isnot selected   Catalin Marinas
• LPC32XX architecture files (updated)   Luotao Fu
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Jamie Iles
• [PATCH/RFC v2 0/3] Human readable platform-specific performance event support   Tomasz Fujak
• [alsa-devel] [PATCHv2 05/10] ASoC: AC97: SMDK: Add wm9713 machine driver   Mark Brown
• [PATCH/RFC v2 0/3] Human readable platform-specific performance event support   Peter Zijlstra
• [PATCH/RFC v2 0/3] Human readable platform-specific performance event support   Tomasz Fujak
• [PATCH 00/06] ARM: Initial SuperH Mobile ARM support   Magnus Damm
• [PATCH 01/06] ARM: SuperH Mobile ARM, sh7367 and G3EVM support   Magnus Damm
• [PATCH 02/06] ARM: Add sh7377 and G4EVM support   Magnus Damm
• [PATCH 03/06] ARM: Add sh7372 and AP4EVB support   Magnus Damm
• [PATCH 04/06] sh: Build drivers/sh for SuperH Mobile ARM   Magnus Damm
• [PATCH 05/06] sh: Let INTC set IRQF_VALID on ARM platforms   Magnus Damm
• [PATCH 06/06] sh-sci: Preliminary SuperH Mobile ARM support   Magnus Damm
• [patch 2/2] at91_udc.c use spinlocks instead of local_irq_xxx   Harro Haan
• ARM11 MPCore: Adding nop to __delay() doubles the BogoMIPS/lpj   Catalin Marinas
• [PATCH] ARM: Always generate the IT instruction when compilingfor Thumb-2   Catalin Marinas
• [PATCH 1/5] gic: prevent gic from crossing NR_IRQ   Catalin Marinas
• [GIT PULL] pxa: fixes for v2.6.33-rc4   Eric Miao
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v4)   Catalin Marinas
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v4)   Jamie Lokier
• [PATCH] ARM: Always generate the IT instruction when compilingfor Thumb-2   Jamie Lokier
• [PATCH] ARM: Add SWP/SWPB emulation for ARMv7 processors (v4)   Catalin Marinas
• [PATCH] ARM: Always generate the IT instruction when compilingfor Thumb-2   Catalin Marinas
• disable_irq() causes hang on AT91RM9200 targets?   Bill Gatliff
• Uncompressing broken with commit e7db7b4270   Catalin Marinas
• [PATCH 08/13] ARM: LPC32XX: clock tree support   Rabin Vincent
• disable_irq() causes hang on AT91RM9200 targets?   Bill Gatliff
• IRQF_VALID   Russell King - ARM Linux
• [PATCH 3/3] ARM: Select CPU_32v6K for CPU_V7 only if ARCH_OMAP2 isnot selected   Tony Lindgren
• [PATCH 06/13] ARM: LPC32XX: Core architecture files   H Hartley Sweeten
• [PATCH 3/3] ARM: Select CPU_32v6K for CPU_V7 only if ARCH_OMAP2 isnot selected   Catalin Marinas
• [PATCH 3/3] ARM: Select CPU_32v6K for CPU_V7 only if ARCH_OMAP2 isnot selected   Jamie Lokier
• LPC32XX architecture files (updated)   Wolfram Sang
• LPC32XX architecture files (updated)   Kevin Wells
• [PATCH] mx35: add a missing comma in a pad definition   Uwe Kleine-König
• [PATCH 08/13] ARM: LPC32XX: clock tree support   Kevin Wells
• [PATCH 06/13] ARM: LPC32XX: Core architecture files   Kevin Wells
• LPC32XX architecture files (updated)   Kevin Wells
• 32-bit Thumb-2 breakpoints   Daniel Jacobowitz
• [PATCH 01/06] ARM: SuperH Mobile ARM, sh7367 and G3EVM support   Russell King - ARM Linux
• [PATCH 03/06] ARM: Add sh7372 and AP4EVB support   Russell King - ARM Linux
• [RFC PATCH 00/12] generic arm for msm -v2   Daniel Walker
• [RFC PATCH 01/12] arm: msm: allow ARCH_MSM to have v7 cpus   Daniel Walker
• [RFC PATCH 02/12] arm: msm: add oprofile pmu support   Daniel Walker
• [RFC PATCH 03/12] arm: boot: update old ARM ID   Daniel Walker
• [RFC PATCH 04/12] arm: mm: cache-l2x0: add l2x0 suspend and resume functions   Daniel Walker
• [RFC PATCH 05/12] arm: mm: retry on QSD icache parity errors   Daniel Walker
• [RFC PATCH 06/12] arm: msm: set L2CR1 to enable prefetch and burst on Scorpion.   Daniel Walker
• [RFC PATCH 07/12] arm: mm: support error reporting in L1/L2 caches on QSD   Daniel Walker
• [RFC PATCH 08/12] arm: mm: enable L2X0 to use L2 cache on MSM7X27   Daniel Walker
• [RFC PATCH 09/12] arm: msm: Enable frequency scaling.   Daniel Walker
• [RFC PATCH 10/12] arm: msm: define HAVE_CLK for ARCH_MSM   Daniel Walker
• [RFC PATCH 11/12] arm: vfp: Add additional vfp interfaces   Daniel Walker
• [RFC PATCH 12/12] arm: mm: qsd8x50: Fix incorrect permission faults   Daniel Walker
• [RFC 05/18] arm: msm: implement ioremap_strongly_ordered   Larry Bassel
• disable_irq() causes hang on AT91RM9200 targets?   Ben Dooks
• [RFC PATCH 06/12] arm: msm: set L2CR1 to enable prefetch and burst on Scorpion.   Nicolas Pitre
• [alsa-devel] [PATCHv2 05/10] ASoC: AC97: SMDK: Add wm9713 machine driver   jassi brar
• [RFC PATCH 06/12] arm: msm: set L2CR1 to enable prefetch and burst on Scorpion.   Daniel Walker
• [RFC PATCH 06/12] arm: msm: set L2CR1 to enable prefetch and burst on Scorpion.   Nicolas Pitre
• [PATCH v2 1/7] ARM: S5P6442: Add Samsung S5P6442 CPU support   Kukjin Kim
• [PATCH v2 2/7] ARM: S5P6442: Add clock support for S5P6442   Kukjin Kim
• [PATCH v2 3/7] ARM: S5P6442: Add IRQ support   Kukjin Kim
• [PATCH v2 4/7] ARM: S5P6442: Update Kconfig and Makefiles   Kukjin Kim
• [PATCH v2 5/7] ARM: S5P6442: Add SMDK6442 board support file   Kukjin Kim
• [PATCH v2 6/7] ARM: S5P6442: Add S5P6442 configuration file   Kukjin Kim
• [PATCH v2 7/7] ARM: S5P6442: Add serial port support   Kukjin Kim
• [PATCH v2 0/7] ARM: S5P6442: Add support for Samsung's S5P6442 SoC   Kukjin Kim
• [RFC PATCH 06/12] arm: msm: set L2CR1 to enable prefetch and burst on Scorpion.   Bryan Huntsman
• [PATCH 05/06] sh: Let INTC set IRQF_VALID on ARM platforms   Paul Mundt
• [PATCH 06/06] sh-sci: Preliminary SuperH Mobile ARM support   Paul Mundt
• [PATCH v2 2/7 RE-SEND] ARM: S5P6442: Add clock support for S5P6442   Kukjin Kim
• [PATCH v2 2/7] ARM: S5P6442: Add clock support for S5P6442   Ben Dooks
• [PATCH v2 4/7] ARM: S5P6442: Update Kconfig and Makefiles   Ben Dooks
• [PATCH v2 0/7] ARM: S5P6442: Add support for Samsung's S5P6442 SoC   Kyungmin Park
• Samsung device updates   Ben Dooks
• [PATCH] ARM: SAMSUNG: Add DMA masks to hsotg device   Ben Dooks
• [PATCH] ARM: S3C64XX: SPI: Make platform device compilation selectable   Ben Dooks
• [PATCH] ARM: S3C2412: SoC has the fractional baud rate register   Ben Dooks
• [PATCH] ARM: SAMSUNG: Add SERIAL_SAMSUNG_UARTS_4 Kconfig option   Ben Dooks
• [PATCH] ARM: SAMSUNG: Use PLAT_SAMSUNG instead of PLAT_S3C   Ben Dooks
• [PATCH] ARM: S3C64XX: Make audio device code built unconditionally   Ben Dooks
• [PATCH v2 2/7 RE-SEND] ARM: S5P6442: Add clock support for S5P6442   Ben Dooks
• [PATCH RE-SEND-2] ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig   Ben Dooks
• at91san9g20, INFO: RCU detected CPU 0 stall   Paul Thomas
• ARM11 MPCore: Adding nop to __delay() doubles the BogoMIPS/lpj   Shilimkar, Santosh
• [PATCH v2 0/7] ARM: S5P6442: Add support for Samsung's S5P6442 SoC   Kukjin Kim
• [PATCH RE-SEND-3] ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig   Kukjin Kim
• [RFC PATCH 08/12] arm: mm: enable L2X0 to use L2 cache on MSM7X27   Pavel Machek
• [RFC PATCH 06/12] arm: msm: set L2CR1 to enable prefetch and burst on Scorpion.   Pavel Machek
• [RFC PATCH 07/12] arm: mm: support error reporting in L1/L2 caches on QSD   Pavel Machek
• [RFC PATCH 09/12] arm: msm: Enable frequency scaling.   Pavel Machek
• [RFC PATCH 01/12] arm: msm: allow ARCH_MSM to have v7 cpus   Pavel Machek
• [RFC PATCH 04/12] arm: mm: cache-l2x0: add l2x0 suspend and resume functions   Pavel Machek
• [RFC PATCH 05/12] arm: mm: retry on QSD icache parity errors   Pavel Machek
• [RFC PATCH 10/12] arm: msm: define HAVE_CLK for ARCH_MSM   Pavel Machek
• [RFC PATCH 11/12] arm: vfp: Add additional vfp interfaces   Pavel Machek
• [PATCH v2 0/4] GIC Changes   adharmap at codeaurora.org
• [PATCH v2 1/4] GIC: Disable unused interrupts   adharmap at codeaurora.org
• [PATCH v2 2/4] GIC: Prevent gic from crossing NR_IRQS   adharmap at codeaurora.org
• [PATCH v2 3/4] GIC: Add callback for mask_ack   adharmap at codeaurora.org
• [PATCH v2 4/4] GIC: Dont disable INT in ack callback   adharmap at codeaurora.org
• IRQF_VALID   Magnus Damm
• [PATCH v2 2/7 RE-SEND-2] ARM: S5P6442: Add clock support for S5P6442   Kukjin Kim
• [RFC PATCH 12/12] arm: mm: qsd8x50: Fix incorrect permission faults   Pavel Machek
• [PATCH v2 2/7 RE-SEND-2] ARM: S5P6442: Add clock support for S5P6442   Ben Dooks
• [PATCH] mx35: add a missing comma in a pad definition   Sascha Hauer
• Eliminate plat-s3c   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move common headers from plat-s3c to plat-samsung   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move map-base to plat-samsung   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move pm.c to plat-samsung   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move DMA support to plat-samsung   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move the last build from plat-s3c to plat-samsung   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move plat-s3c Kconfig entries to plat-samsung and plat-s3c24xx   Ben Dooks
• [PATCH] ARM: S3C24XX: Move audio-simtec.h to plat-s3c24xx   Ben Dooks
• [PATCH] ARM: SAMSUNG: Select NO_IOPORT for plat-samsung   Ben Dooks
• [PATCH] ARM: SAMSUNG: Move include/mach files out of plat-s3c   Ben Dooks
• [PATCH] ARM: S3C: Remove old plat-s3c directory and unused contents   Ben Dooks
• [PATCH 0/3] RTC driver for i.MX25   Sascha Hauer
• [alsa-devel] [PATCHv2 05/10] ASoC: AC97: SMDK: Add wm9713 machine driver   Mark Brown
• [PATCH] ARM: SAMSUNG: Add DMA masks to hsotg device   Sergei Shtylyov
• [rtc-linux] [PATCH 1/3] rtc: driver for the DryIce block found in i.MX25 chips   Alessandro Zummo
• [PATCH RE-SEND-3] ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig   Russell King - ARM Linux
• [PATCH 3/3] ARM: Select CPU_32v6K for CPU_V7 only if ARCH_OMAP2 isnot selected   Catalin Marinas
• [PATCH 3/3] ARM: Select CPU_32v6K for CPU_V7 only if ARCH_OMAP2 isnot selected   Catalin Marinas
• [RFC PATCH 06/12] arm: msm: set L2CR1 to enable prefetch and burst on Scorpion.   Catalin Marinas
• [RFC PATCH 07/12] arm: mm: support error reporting in L1/L2 caches onQSD   Catalin Marinas
• [RFC PATCH 04/12] arm: mm: cache-l2x0: add l2x0 suspend and resumefunctions   Catalin Marinas
• [RFC PATCH 05/12] arm: mm: retry on QSD icache parity errors   Catalin Marinas
• [PATCH 01/06] ARM: SuperH Mobile ARM, sh7367 and G3EVM support   Magnus Damm
• [PATCH 0/3] OMAP4: Enable L2 cache   Shilimkar, Santosh
• [PATCH] OMAP4: Add L2 Cache support   Santosh Shilimkar
• [PATCH] OMAP4: Clean the secondary_data from L2   Santosh Shilimkar
• [PATCH] OMAP4: Enable L2 Cache   Santosh Shilimkar
• [PATCH 0/3] OMAP4: Enable L2 cache   Shilimkar, Santosh
• [PATCH 1/3] OMAP4: Add L2 Cache support   Santosh Shilimkar
• [PATCH 2/3] OMAP4: Clean the secondary_data from L2   Santosh Shilimkar
• [PATCH 3/3] OMAP4: Enable L2 Cache   Santosh Shilimkar
• [PATCH v4 3/8 RE-SEND] ARM: S5PV210: Add IRQ support   Kukjin Kim
• [PATCH v4 4/8 RE-SEND] ARM: S5PV210: Update Kconfig and Makefiles   Kukjin Kim
• [PATCH v4 5/8] ARM: S5PV210: Add SMDKV210 board support file   Kukjin Kim
• [PATCH v4 7/8 RE-SEND] ARM: S5PV210: Add S5PV210 configuration file   Kukjin Kim
• [PATCH v4 8/8 RE-SEND] ARM: S5PV210: Add S5PC110 configuration file   Kukjin Kim
• [PATCH 1/3] OMAP4: Add L2 Cache support   Catalin Marinas
• ARM11 MPCore: Adding nop to __delay() doubles the BogoMIPS/lpj   Leif Lindholm
• [PATCH 1/3] OMAP4: Add L2 Cache support   Shilimkar, Santosh
• Ignore [PATCH v4 5/8] ARM: S5PV210: Add SMDKV210 board support file   Kukjin Kim
• [PATCH 1/3 v2] OMAP4: Add L2 Cache support   Santosh Shilimkar
• [RFC PATCH 04/12] arm: mm: cache-l2x0: add l2x0 suspend and resume functions   Russell King - ARM Linux
• [RFC PATCH 03/12] arm: boot: update old ARM ID   Russell King - ARM Linux
• [RFC PATCH 11/12] arm: vfp: Add additional vfp interfaces   Russell King - ARM Linux
• [PATCH 1/3] OMAP4: Add L2 Cache support   Russell King - ARM Linux
• [RFC PATCH 06/12] arm: msm: set L2CR1 to enable prefetch and burst on Scorpion.   Daniel Walker
• [RFC PATCH 04/12] arm: mm: cache-l2x0: add l2x0 suspend and resume functions   Daniel Walker
• [RFC PATCH 03/12] arm: boot: update old ARM ID   Daniel Walker
• Uncompressing broken with commit e7db7b4270   Uwe Kleine-König
• disable_irq() causes hang on AT91RM9200 targets?   Uwe Kleine-König
• ARM11 MPCore: Adding nop to __delay() doubles the BogoMIPS/lpj   Uwe Kleine-König
• Uncompressing broken with commit e7db7b4270   Albin Tonnerre
• Uncompressing broken with commit e7db7b4270   Uwe Kleine-König
• Uncompressing broken with commit e7db7b4270   Russell King - ARM Linux
• ARM11 MPCore: Adding nop to __delay() doubles the BogoMIPS/lpj   Leif Lindholm
• ARM11 MPCore: Adding nop to __delay() doubles the BogoMIPS/lpj   Russell King - ARM Linux
• Uncompressing broken with commit e7db7b4270   Albin Tonnerre
• Uncompressing broken with commit e7db7b4270   Colin Tuckley
• [patch v2 0/2] at91_udc driver: read_fifo timing issue + use spinlocks   Harro Haan
• [patch v2 1/2] at91_udc.c read_fifo timing issue   Harro Haan
• [patch v2 2/2] at91_udc.c use spinlocks instead of local_irq_xxx   Harro Haan
• not able to understand 'icedcc_putc'   Chetan Nanda
• [patch v2 1/2] at91_udc.c read_fifo timing issue   Remy Bohmer
• [patch v2 2/2] at91_udc.c use spinlocks instead of local_irq_xxx   H Hartley Sweeten
• [PATCH 1/3] OMAP4: Add L2 Cache support   Tony Lindgren
• [RFC PATCH 04/12] arm: mm: cache-l2x0: add l2x0 suspend and resume functions   Ruan, Willie
• [RFC PATCH 04/12] arm: mm: cache-l2x0: add l2x0 suspend and resume functions   Ruan, Willie
• [PATCH 1/3 v2] OMAP4: Add L2 Cache support   Tony Lindgren
• [RFC PATCH 04/12] arm: mm: cache-l2x0: add l2x0 suspend and resume functions   Daniel Walker
• [RFC PATCH 04/12] arm: mm: cache-l2x0: add l2x0 suspend and resume functions   Ruan, Willie
• [RFC PATCH 04/12] arm: mm: cache-l2x0: add l2x0 suspend and resume functions   Daniel Walker
• [RFC PATCH 04/12] arm: mm: cache-l2x0: add l2x0 suspend and resume functions   Russell King - ARM Linux
• [RFC PATCH 04/12] arm: mm: cache-l2x0: add l2x0 suspend and resume functions   Daniel Walker
• [PATCH 0/1] ARM: Add option CMDLINE_FORCE to force usage of the in-kernel cmdline   Alexander Holler
• [PATCH 1/1] ARM: Add option CMDLINE_FORCE to force usage of the in-kernel cmdline   Alexander Holler
• [RFC PATCH 04/12] arm: mm: cache-l2x0: add l2x0 suspend and resume functions   Russell King - ARM Linux
• [PATCH 1/4] mfd: update i2c driver for max8925   Samuel Ortiz
• [PATCH 3/4] rtc: enable rtc in max8925   Samuel Ortiz
• [RFC PATCH 04/12] arm: mm: cache-l2x0: add l2x0 suspend and resume functions   Daniel Walker
• [patch 1/1] arm: bcmring: Fix locking in dma_unmap   Leo (Hao) Chen
• [PATCH RE-SEND-3] ARM: MM: Add ARM_L1_CACHE_SHIFT_6 for handle inside each ARCH Kconfig   Tony Lindgren
• Uncompressing broken with commit e7db7b4270   Uwe Kleine-König
• [PATCH v5] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Alberto Panizzo
• [PATCH v5] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Uwe Kleine-König
• [PATCH v5] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Dmitry Torokhov
• [PATCH v5] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Alberto Panizzo
• [PATCH v5] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Alberto Panizzo
• [PATCH] omap: define _toggle_gpio_edge_triggering only for OMAP1   Uwe Kleine-König
• [PATCH] mach-dove/common.c: remove unnecessary (void *) casts   H Hartley Sweeten
• [PATCH] mach-iop13xx/setup.c: remove unnecessary (void *) casts   H Hartley Sweeten
• [PATCH] mach-kirkwood/common.c: remove unnecessary (void *) casts   H Hartley Sweeten
• [PATCH] mach-orion5x/common.c: remove unnecessary (void *) casts   H Hartley Sweeten
• [PATCH] plat-iop/adma.c: remove unnecessary (void *) casts   H Hartley Sweeten
• [PATCH]NUC900 LCD Controller Driver   Andrew Morton
• [PATCH]NUC900 LCD Controller Driver   H Hartley Sweeten
• [PATCH 0/9] Initial multi-omap support for omap4   Tony Lindgren
• [PATCH 1/9] omap: Move multi-omap ifdeffery into it's own header file   Tony Lindgren
• [PATCH 2/9] omap2/3/4: Clean up defines for entry-macro.S   Tony Lindgren
• [PATCH 3/9] omap4: Use get_irqnr_preamble   Tony Lindgren
• [PATCH 4/9] omap2/3/4: Clean up entry-macro.s for adding support for omap4 multiboot   Tony Lindgren
• [PATCH 5/9] omap2/3/4: Allow booting omap4 with multi-omap configuration   Tony Lindgren
• [PATCH 6/9] omap3/4: Fix compile for multi-omap for clkops_noncore_dpll_ops   Tony Lindgren
• [PATCH 7/9] omap: Fix gpio.c for multi-omap for omap4   Tony Lindgren
• [PATCH 8/9] omap2/3/4: Fix mach-omap2/serial.c for multiboot   Tony Lindgren
• [PATCH 9/9] omap2/3/4: Add omap4 into omap3_defconfnig   Tony Lindgren
• [PATCH 0/9] Initial multi-omap support for omap4   Shilimkar, Santosh
• [PATCH v5] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Alberto Panizzo
• [PATCH v6] input: IMX: add imx-keypad driver to support the Keypad Port present in the imx application processors family.   Alberto Panizzo
• [PATCH v5] input: MXC: add mxc-keypad driver to support the Keypad Port present in the mxc application processors family.   Uwe Kleine-König
• [PATCH 0/9] Initial multi-omap support for omap4   Shilimkar, Santosh
• Static mappings at boottime   Khushhua Mogambo
• Static mappings at boottime   Russell King - ARM Linux
• Static mappings at boottime   Khushhua Mogambo
• Static mappings at boottime   Russell King - ARM Linux
• [PATCH 5/5] arm/perfevents: implement perf event support for ARMv6   Russell King - ARM Linux
• [PATCH 0/9] Initial multi-omap support for omap4   Tony Lindgren
• [PATCH 0/9] Initial multi-omap support for omap4   Tony Lindgren
• [PATCH] ARM: SAMSUNG: Add support for 12bit ADC   Maurus Cuelenaere
• [PATCH 0/9] Initial multi-omap support for omap4   Shilimkar, Santosh
• change boot requirements [Was: make PHYS_OFFSET determined at run time (unfinished)]   Uwe Kleine-König
• [PATCH 1/3] zImage: don't hard code the stack size twice   Uwe Kleine-König
• [PATCH 2/3] uImage: require passing a LOADADDR when building with RUNTIME_PHYSOFFSET   Uwe Kleine-König
• [PATCH 3/3] Allow PHYS_OFFSET to be runtime determined   Uwe Kleine-König
• Static mappings at boottime   Mogambo Park
• [PATCH] staging/dream: add missing include files/fix compilation   Pavel Machek
• [PATCH v6] input: IMX: add imx-keypad driver to support the Keypad Port present in the imx application processors family.   Dmitry Torokhov
• [PATCH] staging/dream: add missing include files/fix compilation   Pavel Machek
• [PATCH] [ARM] pxa: match camera clock by struct device   Mike Rapoport
• [PATCH] [ARM] pxa: match camera clock by struct device   Mike Rapoport
• [PATCH] [ARM] pxa: match camera clock by struct device   Mike Rapoport
• [PATCH] [ARM] pxa: match camera clock by struct device   Mike Rapoport
• [PATCH] staging/dream: add missing include files/fix compilation   Daniel Walker
• [PATCH v6] input: IMX: add imx-keypad driver to support the Keypad Port present in the imx application processors family.   Alberto Panizzo
• [PATCH] staging/dream: add missing include files/fix compilation   Daniel Walker
• [PATCH 1/2] ftrace: pass KBUILD_CFLAGS along with CC to record_mcount.pl   Rabin Vincent
• [PATCH 2/2] ftrace: re-enable dynamic ftrace for ARM   Rabin Vincent
• [PATCH 2/4] ARM: SAMSUNG: Rename s3c24xx touchscreen interface to s3c   Pavel Machek
• [patch v2 1/2] at91_udc.c read_fifo timing issue   Ryan Mallon
• [patch v2 1/2] at91_udc.c read_fifo timing issue   Anti Sullin
• defining ZRELADDR as PHYS_OFFSET + TEXT_OFFSET   George G. Davis
• [PATCH v6] input: IMX: add imx-keypad driver to support the Keypad Port present in the imx application processors family.   Dmitry Torokhov